1 files changed, 0 insertions, 92 deletions
diff --git a/sound/oss/waveartist.h b/sound/oss/waveartist.h
deleted file mode 100644
index dac4ca910d95..000000000000
--- a/sound/oss/waveartist.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/sound/oss/waveartist.h
- *
- * def file for Rockwell RWA010 chip set, as installed in Rebel.com NetWinder
- */
-
-//registers
-#define CMDR	0
-#define DATR	2
-#define CTLR	4
-#define	STATR	5
-#define	IRQSTAT	12
-
-//bit defs
-//reg STATR
-#define	CMD_WE	0x80
-#define	CMD_RF	0x40
-#define	DAT_WE	0x20
-#define	DAT_RF	0x10
-
-#define	IRQ_REQ	0x08
-#define	DMA1	0x04
-#define	DMA0	0x02
-
-//bit defs
-//reg CTLR
-#define	CMD_WEIE	0x80
-#define	CMD_RFIE	0x40
-#define	DAT_WEIE	0x20
-#define	DAT_RFIE	0x10
-
-#define	RESET	0x08
-#define	DMA1_IE	0x04
-#define	DMA0_IE	0x02
-#define	IRQ_ACK	0x01
-
-//commands
-
-#define	WACMD_SYSTEMID		0x00
-#define WACMD_GETREV		0x00
-#define	WACMD_INPUTFORMAT	0x10	//0-8S, 1-16S, 2-8U
-#define	WACMD_INPUTCHANNELS	0x11	//1-Mono, 2-Stereo
-#define	WACMD_INPUTSPEED	0x12	//sampling rate
-#define	WACMD_INPUTDMA		0x13	//0-8bit, 1-16bit, 2-PIO
-#define	WACMD_INPUTSIZE		0x14	//samples to interrupt
-#define	WACMD_INPUTSTART	0x15	//start ADC
-#define	WACMD_INPUTPAUSE	0x16	//pause ADC
-#define	WACMD_INPUTSTOP		0x17	//stop ADC
-#define	WACMD_INPUTRESUME	0x18	//resume ADC
-#define	WACMD_INPUTPIO		0x19	//PIO ADC
-
-#define	WACMD_OUTPUTFORMAT	0x20	//0-8S, 1-16S, 2-8U
-#define	WACMD_OUTPUTCHANNELS	0x21	//1-Mono, 2-Stereo
-#define	WACMD_OUTPUTSPEED	0x22	//sampling rate
-#define	WACMD_OUTPUTDMA		0x23	//0-8bit, 1-16bit, 2-PIO
-#define	WACMD_OUTPUTSIZE	0x24	//samples to interrupt
-#define	WACMD_OUTPUTSTART	0x25	//start ADC
-#define	WACMD_OUTPUTPAUSE	0x26	//pause ADC
-#define	WACMD_OUTPUTSTOP	0x27	//stop ADC
-#define	WACMD_OUTPUTRESUME	0x28	//resume ADC
-#define	WACMD_OUTPUTPIO		0x29	//PIO ADC
-
-#define	WACMD_GET_LEVEL		0x30
-#define	WACMD_SET_LEVEL		0x31
-#define	WACMD_SET_MIXER		0x32
-#define	WACMD_RST_MIXER		0x33
-#define	WACMD_SET_MONO		0x34
-
-/*
- * Definitions for left/right recording input mux
- */
-#define ADC_MUX_NONE	0
-#define ADC_MUX_MIXER	1
-#define ADC_MUX_LINE	2
-#define ADC_MUX_AUX2	3
-#define ADC_MUX_AUX1	4
-#define ADC_MUX_MIC	5
-
-/*
- * Definitions for mixer gain settings
- */
-#define MIX_GAIN_LINE	0	/* line in	 */
-#define MIX_GAIN_AUX1	1	/* aux1		 */
-#define MIX_GAIN_AUX2	2	/* aux2		 */
-#define MIX_GAIN_XMIC	3	/* crossover mic */
-#define MIX_GAIN_MIC	4	/* normal mic	 */
-#define MIX_GAIN_PREMIC	5	/* preamp mic	 */
-#define MIX_GAIN_OUT	6	/* output	 */
-#define MIX_GAIN_MONO	7	/* mono in	 */
-
-int wa_sendcmd(unsigned int cmd);
-int wa_writecmd(unsigned int cmd, unsigned int arg);