diff options
Diffstat (limited to 'sound/arm/pxa2xx-ac97-lib.c')
-rw-r--r-- | sound/arm/pxa2xx-ac97-lib.c | 145 |
1 files changed, 91 insertions, 54 deletions
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 58274b4a1f09..e55c0421718b 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -17,12 +17,13 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/of_gpio.h> +#include <linux/soc/pxa/cpu.h> #include <sound/pxa2xx-lib.h> -#include <mach/irqs.h> -#include <mach/regs-ac97.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> + +#include "pxa2xx-ac97-regs.h" static DEFINE_MUTEX(car_mutex); static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); @@ -30,6 +31,7 @@ static volatile long gsr_bits; static struct clk *ac97_clk; static struct clk *ac97conf_clk; static int reset_gpio; +static void __iomem *ac97_reg_base; extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio); @@ -46,7 +48,7 @@ extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio); int pxa2xx_ac97_read(int slot, unsigned short reg) { int val = -ENODEV; - volatile u32 *reg_addr; + u32 __iomem *reg_addr; if (slot > 0) return -ENODEV; @@ -55,31 +57,33 @@ int pxa2xx_ac97_read(int slot, unsigned short reg) /* set up primary or secondary codec space */ if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS) - reg_addr = slot ? &SMC_REG_BASE : &PMC_REG_BASE; + reg_addr = ac97_reg_base + + (slot ? SMC_REG_BASE : PMC_REG_BASE); else - reg_addr = slot ? &SAC_REG_BASE : &PAC_REG_BASE; + reg_addr = ac97_reg_base + + (slot ? SAC_REG_BASE : PAC_REG_BASE); reg_addr += (reg >> 1); /* start read access across the ac97 link */ - GSR = GSR_CDONE | GSR_SDONE; + writel(GSR_CDONE | GSR_SDONE, ac97_reg_base + GSR); gsr_bits = 0; - val = (*reg_addr & 0xffff); + val = (readl(reg_addr) & 0xffff); if (reg == AC97_GPIO_STATUS) goto out; - if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 && - !((GSR | gsr_bits) & GSR_SDONE)) { + if (wait_event_timeout(gsr_wq, (readl(ac97_reg_base + GSR) | gsr_bits) & GSR_SDONE, 1) <= 0 && + !((readl(ac97_reg_base + GSR) | gsr_bits) & GSR_SDONE)) { printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n", - __func__, reg, GSR | gsr_bits); + __func__, reg, readl(ac97_reg_base + GSR) | gsr_bits); val = -ETIMEDOUT; goto out; } /* valid data now */ - GSR = GSR_CDONE | GSR_SDONE; + writel(GSR_CDONE | GSR_SDONE, ac97_reg_base + GSR); gsr_bits = 0; - val = (*reg_addr & 0xffff); + val = (readl(reg_addr) & 0xffff); /* but we've just started another cycle... */ - wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1); + wait_event_timeout(gsr_wq, (readl(ac97_reg_base + GSR) | gsr_bits) & GSR_SDONE, 1); out: mutex_unlock(&car_mutex); return val; @@ -88,25 +92,27 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_read); int pxa2xx_ac97_write(int slot, unsigned short reg, unsigned short val) { - volatile u32 *reg_addr; + u32 __iomem *reg_addr; int ret = 0; mutex_lock(&car_mutex); /* set up primary or secondary codec space */ if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS) - reg_addr = slot ? &SMC_REG_BASE : &PMC_REG_BASE; + reg_addr = ac97_reg_base + + (slot ? SMC_REG_BASE : PMC_REG_BASE); else - reg_addr = slot ? &SAC_REG_BASE : &PAC_REG_BASE; + reg_addr = ac97_reg_base + + (slot ? SAC_REG_BASE : PAC_REG_BASE); reg_addr += (reg >> 1); - GSR = GSR_CDONE | GSR_SDONE; + writel(GSR_CDONE | GSR_SDONE, ac97_reg_base + GSR); gsr_bits = 0; - *reg_addr = val; - if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 && - !((GSR | gsr_bits) & GSR_CDONE)) { + writel(val, reg_addr); + if (wait_event_timeout(gsr_wq, (readl(ac97_reg_base + GSR) | gsr_bits) & GSR_CDONE, 1) <= 0 && + !((readl(ac97_reg_base + GSR) | gsr_bits) & GSR_CDONE)) { printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n", - __func__, reg, GSR | gsr_bits); + __func__, reg, readl(ac97_reg_base + GSR) | gsr_bits); ret = -EIO; } @@ -120,17 +126,17 @@ static inline void pxa_ac97_warm_pxa25x(void) { gsr_bits = 0; - GCR |= GCR_WARM_RST; + writel(readl(ac97_reg_base + GCR) | (GCR_WARM_RST), ac97_reg_base + GCR); } static inline void pxa_ac97_cold_pxa25x(void) { - GCR &= GCR_COLD_RST; /* clear everything but nCRST */ - GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + writel(readl(ac97_reg_base + GCR) & ( GCR_COLD_RST), ac97_reg_base + GCR); /* clear everything but nCRST */ + writel(readl(ac97_reg_base + GCR) & (~GCR_COLD_RST), ac97_reg_base + GCR); /* then assert nCRST */ gsr_bits = 0; - GCR = GCR_COLD_RST; + writel(GCR_COLD_RST, ac97_reg_base + GCR); } #endif @@ -142,15 +148,15 @@ static inline void pxa_ac97_warm_pxa27x(void) /* warm reset broken on Bulverde, so manually keep AC97 reset high */ pxa27x_configure_ac97reset(reset_gpio, true); udelay(10); - GCR |= GCR_WARM_RST; + writel(readl(ac97_reg_base + GCR) | (GCR_WARM_RST), ac97_reg_base + GCR); pxa27x_configure_ac97reset(reset_gpio, false); udelay(500); } static inline void pxa_ac97_cold_pxa27x(void) { - GCR &= GCR_COLD_RST; /* clear everything but nCRST */ - GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + writel(readl(ac97_reg_base + GCR) & ( GCR_COLD_RST), ac97_reg_base + GCR); /* clear everything but nCRST */ + writel(readl(ac97_reg_base + GCR) & (~GCR_COLD_RST), ac97_reg_base + GCR); /* then assert nCRST */ gsr_bits = 0; @@ -158,7 +164,7 @@ static inline void pxa_ac97_cold_pxa27x(void) clk_prepare_enable(ac97conf_clk); udelay(5); clk_disable_unprepare(ac97conf_clk); - GCR = GCR_COLD_RST | GCR_WARM_RST; + writel(GCR_COLD_RST | GCR_WARM_RST, ac97_reg_base + GCR); } #endif @@ -168,26 +174,26 @@ static inline void pxa_ac97_warm_pxa3xx(void) gsr_bits = 0; /* Can't use interrupts */ - GCR |= GCR_WARM_RST; + writel(readl(ac97_reg_base + GCR) | (GCR_WARM_RST), ac97_reg_base + GCR); } static inline void pxa_ac97_cold_pxa3xx(void) { /* Hold CLKBPB for 100us */ - GCR = 0; - GCR = GCR_CLKBPB; + writel(0, ac97_reg_base + GCR); + writel(GCR_CLKBPB, ac97_reg_base + GCR); udelay(100); - GCR = 0; + writel(0, ac97_reg_base + GCR); - GCR &= GCR_COLD_RST; /* clear everything but nCRST */ - GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + writel(readl(ac97_reg_base + GCR) & ( GCR_COLD_RST), ac97_reg_base + GCR); /* clear everything but nCRST */ + writel(readl(ac97_reg_base + GCR) & (~GCR_COLD_RST), ac97_reg_base + GCR); /* then assert nCRST */ gsr_bits = 0; /* Can't use interrupts on PXA3xx */ - GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + writel(readl(ac97_reg_base + GCR) & (~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN)), ac97_reg_base + GCR); - GCR = GCR_WARM_RST | GCR_COLD_RST; + writel(GCR_WARM_RST | GCR_COLD_RST, ac97_reg_base + GCR); } #endif @@ -213,10 +219,10 @@ bool pxa2xx_ac97_try_warm_reset(void) #endif snd_BUG(); - while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + while (!((readl(ac97_reg_base + GSR) | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) mdelay(1); - gsr = GSR | gsr_bits; + gsr = readl(ac97_reg_base + GSR) | gsr_bits; if (!(gsr & (GSR_PCR | GSR_SCR))) { printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", __func__, gsr); @@ -250,10 +256,10 @@ bool pxa2xx_ac97_try_cold_reset(void) #endif snd_BUG(); - while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + while (!((readl(ac97_reg_base + GSR) | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) mdelay(1); - gsr = GSR | gsr_bits; + gsr = readl(ac97_reg_base + GSR) | gsr_bits; if (!(gsr & (GSR_PCR | GSR_SCR))) { printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", __func__, gsr); @@ -268,8 +274,10 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset); void pxa2xx_ac97_finish_reset(void) { - GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); - GCR |= GCR_SDONE_IE|GCR_CDONE_IE; + u32 gcr = readl(ac97_reg_base + GCR); + gcr &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + gcr |= GCR_SDONE_IE|GCR_CDONE_IE; + writel(gcr, ac97_reg_base + GCR); } EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset); @@ -277,9 +285,9 @@ static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id) { long status; - status = GSR; + status = readl(ac97_reg_base + GSR); if (status) { - GSR = status; + writel(status, ac97_reg_base + GSR); gsr_bits |= status; wake_up(&gsr_wq); @@ -287,9 +295,9 @@ static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id) since they tend to spuriously trigger when MMC is used (hardware bug? go figure)... */ if (cpu_is_pxa27x()) { - MISR = MISR_EOC; - PISR = PISR_EOC; - MCSR = MCSR_EOC; + writel(MISR_EOC, ac97_reg_base + MISR); + writel(PISR_EOC, ac97_reg_base + PISR); + writel(MCSR_EOC, ac97_reg_base + MCSR); } return IRQ_HANDLED; @@ -301,7 +309,7 @@ static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id) #ifdef CONFIG_PM int pxa2xx_ac97_hw_suspend(void) { - GCR |= GCR_ACLINK_OFF; + writel(readl(ac97_reg_base + GCR) | (GCR_ACLINK_OFF), ac97_reg_base + GCR); clk_disable_unprepare(ac97_clk); return 0; } @@ -318,8 +326,15 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume); int pxa2xx_ac97_hw_probe(struct platform_device *dev) { int ret; + int irq; pxa2xx_audio_ops_t *pdata = dev->dev.platform_data; + ac97_reg_base = devm_platform_ioremap_resource(dev, 0); + if (IS_ERR(ac97_reg_base)) { + dev_err(&dev->dev, "Missing MMIO resource\n"); + return PTR_ERR(ac97_reg_base); + } + if (pdata) { switch (pdata->reset_gpio) { case 95: @@ -386,14 +401,18 @@ int pxa2xx_ac97_hw_probe(struct platform_device *dev) if (ret) goto err_clk2; - ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL); + irq = platform_get_irq(dev, 0); + if (!irq) + goto err_irq; + + ret = request_irq(irq, pxa2xx_ac97_irq, 0, "AC97", NULL); if (ret < 0) goto err_irq; return 0; err_irq: - GCR |= GCR_ACLINK_OFF; + writel(readl(ac97_reg_base + GCR) | (GCR_ACLINK_OFF), ac97_reg_base + GCR); err_clk2: clk_put(ac97_clk); ac97_clk = NULL; @@ -411,8 +430,8 @@ void pxa2xx_ac97_hw_remove(struct platform_device *dev) { if (cpu_is_pxa27x()) gpio_free(reset_gpio); - GCR |= GCR_ACLINK_OFF; - free_irq(IRQ_AC97, NULL); + writel(readl(ac97_reg_base + GCR) | (GCR_ACLINK_OFF), ac97_reg_base + GCR); + free_irq(platform_get_irq(dev, 0), NULL); if (ac97conf_clk) { clk_put(ac97conf_clk); ac97conf_clk = NULL; @@ -423,6 +442,24 @@ void pxa2xx_ac97_hw_remove(struct platform_device *dev) } EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove); +u32 pxa2xx_ac97_read_modr(void) +{ + if (!ac97_reg_base) + return 0; + + return readl(ac97_reg_base + MODR); +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_read_modr); + +u32 pxa2xx_ac97_read_misr(void) +{ + if (!ac97_reg_base) + return 0; + + return readl(ac97_reg_base + MISR); +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_read_misr); + MODULE_AUTHOR("Nicolas Pitre"); MODULE_DESCRIPTION("Intel/Marvell PXA sound library"); MODULE_LICENSE("GPL"); |