10 files changed, 59 insertions, 35 deletions
diff --git a/scripts/depmod.sh b/scripts/depmod.sh
index 999d585eaa73..e083bcae343f 100755
--- a/scripts/depmod.sh
+++ b/scripts/depmod.sh
@@ -11,13 +11,14 @@ DEPMOD=$1
 KERNELRELEASE=$2
 
 if ! test -r System.map ; then
+	echo "Warning: modules_install: missing 'System.map' file. Skipping depmod." >&2
 	exit 0
 fi
 
 if [ -z $(command -v $DEPMOD) ]; then
-	echo "'make modules_install' requires $DEPMOD. Please install it." >&2
+	echo "Warning: 'make modules_install' requires $DEPMOD. Please install it." >&2
 	echo "This is probably in the kmod package." >&2
-	exit 1
+	exit 0
 fi
 
 # older versions of depmod require the version string to start with three
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 4a7bd2192073..67ed9f6ccdf8 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -221,7 +221,6 @@ $(obj)/zconf.tab.o: $(obj)/zconf.lex.c
 
 # check if necessary packages are available, and configure build flags
 define filechk_conf_cfg
-	$(CONFIG_SHELL) $(srctree)/scripts/kconfig/check-pkgconfig.sh; \
 	$(CONFIG_SHELL) $<
 endef
 
diff --git a/scripts/kconfig/check-pkgconfig.sh b/scripts/kconfig/check-pkgconfig.sh
deleted file mode 100644
index 7a1c40bfb58c..000000000000
--- a/scripts/kconfig/check-pkgconfig.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-# Check for pkg-config presence
-
-if [ -z $(command -v pkg-config) ]; then
-	echo "'make *config' requires 'pkg-config'. Please install it." 1>&2
-	exit 1
-fi
diff --git a/scripts/kconfig/gconf-cfg.sh b/scripts/kconfig/gconf-cfg.sh
index 533b3d8f8f08..480ecd8b9f41 100755
--- a/scripts/kconfig/gconf-cfg.sh
+++ b/scripts/kconfig/gconf-cfg.sh
@@ -3,6 +3,13 @@
 
 PKG="gtk+-2.0 gmodule-2.0 libglade-2.0"
 
+if [ -z "$(command -v pkg-config)" ]; then
+	echo >&2 "*"
+	echo >&2 "* 'make gconfig' requires 'pkg-config'. Please install it."
+	echo >&2 "*"
+	exit 1
+fi
+
 if ! pkg-config --exists $PKG; then
 	echo >&2 "*"
 	echo >&2 "* Unable to find the GTK+ installation. Please make sure that"
diff --git a/scripts/kconfig/mconf-cfg.sh b/scripts/kconfig/mconf-cfg.sh
index e6f9facd0077..c812872d7f9d 100755
--- a/scripts/kconfig/mconf-cfg.sh
+++ b/scripts/kconfig/mconf-cfg.sh
@@ -4,20 +4,23 @@
 PKG="ncursesw"
 PKG2="ncurses"
 
-if pkg-config --exists $PKG; then
-	echo cflags=\"$(pkg-config --cflags $PKG)\"
-	echo libs=\"$(pkg-config --libs $PKG)\"
-	exit 0
-fi
+if [ -n "$(command -v pkg-config)" ]; then
+	if pkg-config --exists $PKG; then
+		echo cflags=\"$(pkg-config --cflags $PKG)\"
+		echo libs=\"$(pkg-config --libs $PKG)\"
+		exit 0
+	fi
 
-if pkg-config --exists $PKG2; then
-	echo cflags=\"$(pkg-config --cflags $PKG2)\"
-	echo libs=\"$(pkg-config --libs $PKG2)\"
-	exit 0
+	if pkg-config --exists $PKG2; then
+		echo cflags=\"$(pkg-config --cflags $PKG2)\"
+		echo libs=\"$(pkg-config --libs $PKG2)\"
+		exit 0
+	fi
 fi
 
-# Unfortunately, some distributions (e.g. openSUSE) cannot find ncurses
-# by pkg-config.
+# Check the default paths in case pkg-config is not installed.
+# (Even if it is installed, some distributions such as openSUSE cannot
+# find ncurses by pkg-config.)
 if [ -f /usr/include/ncursesw/ncurses.h ]; then
 	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
 	echo libs=\"-lncursesw\"
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 83b5836615fb..143c05fec161 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -490,7 +490,6 @@ static void build_conf(struct menu *menu)
 			switch (prop->type) {
 			case P_MENU:
 				child_count++;
-				prompt = prompt;
 				if (single_menu_mode) {
 					item_make("%s%*c%s",
 						  menu->data ? "-->" : "++>",
diff --git a/scripts/kconfig/nconf-cfg.sh b/scripts/kconfig/nconf-cfg.sh
index 42f5ac73548e..001559ef0a60 100644
--- a/scripts/kconfig/nconf-cfg.sh
+++ b/scripts/kconfig/nconf-cfg.sh
@@ -4,20 +4,23 @@
 PKG="ncursesw menuw panelw"
 PKG2="ncurses menu panel"
 
-if pkg-config --exists $PKG; then
-	echo cflags=\"$(pkg-config --cflags $PKG)\"
-	echo libs=\"$(pkg-config --libs $PKG)\"
-	exit 0
-fi
+if [ -n "$(command -v pkg-config)" ]; then
+	if pkg-config --exists $PKG; then
+		echo cflags=\"$(pkg-config --cflags $PKG)\"
+		echo libs=\"$(pkg-config --libs $PKG)\"
+		exit 0
+	fi
 
-if pkg-config --exists $PKG2; then
-	echo cflags=\"$(pkg-config --cflags $PKG2)\"
-	echo libs=\"$(pkg-config --libs $PKG2)\"
-	exit 0
+	if pkg-config --exists $PKG2; then
+		echo cflags=\"$(pkg-config --cflags $PKG2)\"
+		echo libs=\"$(pkg-config --libs $PKG2)\"
+		exit 0
+	fi
 fi
 
-# Unfortunately, some distributions (e.g. openSUSE) cannot find ncurses
-# by pkg-config.
+# Check the default paths in case pkg-config is not installed.
+# (Even if it is installed, some distributions such as openSUSE cannot
+# find ncurses by pkg-config.)
 if [ -f /usr/include/ncursesw/ncurses.h ]; then
 	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
 	echo libs=\"-lncursesw -lmenuw -lpanelw\"
diff --git a/scripts/kconfig/qconf-cfg.sh b/scripts/kconfig/qconf-cfg.sh
index 0862e1562536..02ccc0ae1031 100755
--- a/scripts/kconfig/qconf-cfg.sh
+++ b/scripts/kconfig/qconf-cfg.sh
@@ -4,6 +4,13 @@
 PKG="Qt5Core Qt5Gui Qt5Widgets"
 PKG2="QtCore QtGui"
 
+if [ -z "$(command -v pkg-config)" ]; then
+	echo >&2 "*"
+	echo >&2 "* 'make xconfig' requires 'pkg-config'. Please install it."
+	echo >&2 "*"
+	exit 1
+fi
+
 if pkg-config --exists $PKG; then
 	echo cflags=\"-std=c++11 -fPIC $(pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets)\"
 	echo libs=\"$(pkg-config --libs $PKG)\"
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 71f39410691b..79f7dd57d571 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -74,7 +74,7 @@ scm_version()
 		fi
 
 		# Check for uncommitted changes
-		if git diff-index --name-only HEAD | grep -qv "^scripts/package"; then
+		if git status -uno --porcelain | grep -qv '^.. scripts/package'; then
 			printf '%s' -dirty
 		fi
 
diff --git a/scripts/subarch.include b/scripts/subarch.include
new file mode 100644
index 000000000000..650682821126
--- /dev/null
+++ b/scripts/subarch.include
@@ -0,0 +1,13 @@
+# SUBARCH tells the usermode build what the underlying arch is.  That is set
+# first, and if a usermode build is happening, the "ARCH=um" on the command
+# line overrides the setting of ARCH below.  If a native build is happening,
+# then ARCH is assigned, getting whatever value it gets normally, and
+# SUBARCH is subsequently ignored.
+
+SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
+				  -e s/sun4u/sparc64/ \
+				  -e s/arm.*/arm/ -e s/sa110/arm/ \
+				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \
+				  -e s/riscv.*/riscv/)