diff options
Diffstat (limited to 'scripts/dtc/libfdt')
| -rw-r--r-- | scripts/dtc/libfdt/fdt_addresses.c | 96 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_empty_tree.c | 1 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_overlay.c | 861 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_ro.c | 4 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_rw.c | 24 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_sw.c | 16 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_wip.c | 4 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/libfdt.h | 47 |
8 files changed, 1041 insertions, 12 deletions
diff --git a/scripts/dtc/libfdt/fdt_addresses.c b/scripts/dtc/libfdt/fdt_addresses.c new file mode 100644 index 000000000000..eff4dbcc729d --- /dev/null +++ b/scripts/dtc/libfdt/fdt_addresses.c @@ -0,0 +1,96 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2014 David Gibson <david@gibson.dropbear.id.au> + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +int fdt_address_cells(const void *fdt, int nodeoffset) +{ + const fdt32_t *ac; + int val; + int len; + + ac = fdt_getprop(fdt, nodeoffset, "#address-cells", &len); + if (!ac) + return 2; + + if (len != sizeof(*ac)) + return -FDT_ERR_BADNCELLS; + + val = fdt32_to_cpu(*ac); + if ((val <= 0) || (val > FDT_MAX_NCELLS)) + return -FDT_ERR_BADNCELLS; + + return val; +} + +int fdt_size_cells(const void *fdt, int nodeoffset) +{ + const fdt32_t *sc; + int val; + int len; + + sc = fdt_getprop(fdt, nodeoffset, "#size-cells", &len); + if (!sc) + return 2; + + if (len != sizeof(*sc)) + return -FDT_ERR_BADNCELLS; + + val = fdt32_to_cpu(*sc); + if ((val < 0) || (val > FDT_MAX_NCELLS)) + return -FDT_ERR_BADNCELLS; + + return val; +} diff --git a/scripts/dtc/libfdt/fdt_empty_tree.c b/scripts/dtc/libfdt/fdt_empty_tree.c index f72d13b1d19c..f2ae9b77c285 100644 --- a/scripts/dtc/libfdt/fdt_empty_tree.c +++ b/scripts/dtc/libfdt/fdt_empty_tree.c @@ -81,4 +81,3 @@ int fdt_create_empty_tree(void *buf, int bufsize) return fdt_open_into(buf, buf, bufsize); } - diff --git a/scripts/dtc/libfdt/fdt_overlay.c b/scripts/dtc/libfdt/fdt_overlay.c new file mode 100644 index 000000000000..bd81241e6658 --- /dev/null +++ b/scripts/dtc/libfdt/fdt_overlay.c @@ -0,0 +1,861 @@ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +/** + * overlay_get_target_phandle - retrieves the target phandle of a fragment + * @fdto: pointer to the device tree overlay blob + * @fragment: node offset of the fragment in the overlay + * + * overlay_get_target_phandle() retrieves the target phandle of an + * overlay fragment when that fragment uses a phandle (target + * property) instead of a path (target-path property). + * + * returns: + * the phandle pointed by the target property + * 0, if the phandle was not found + * -1, if the phandle was malformed + */ +static uint32_t overlay_get_target_phandle(const void *fdto, int fragment) +{ + const fdt32_t *val; + int len; + + val = fdt_getprop(fdto, fragment, "target", &len); + if (!val) + return 0; + + if ((len != sizeof(*val)) || (fdt32_to_cpu(*val) == (uint32_t)-1)) + return (uint32_t)-1; + + return fdt32_to_cpu(*val); +} + +/** + * overlay_get_target - retrieves the offset of a fragment's target + * @fdt: Base device tree blob + * @fdto: Device tree overlay blob + * @fragment: node offset of the fragment in the overlay + * @pathp: pointer which receives the path of the target (or NULL) + * + * overlay_get_target() retrieves the target offset in the base + * device tree of a fragment, no matter how the actual targetting is + * done (through a phandle or a path) + * + * returns: + * the targetted node offset in the base device tree + * Negative error code on error + */ +static int overlay_get_target(const void *fdt, const void *fdto, + int fragment, char const **pathp) +{ + uint32_t phandle; + const char *path = NULL; + int path_len = 0, ret; + + /* Try first to do a phandle based lookup */ + phandle = overlay_get_target_phandle(fdto, fragment); + if (phandle == (uint32_t)-1) + return -FDT_ERR_BADPHANDLE; + + /* no phandle, try path */ + if (!phandle) { + /* And then a path based lookup */ + path = fdt_getprop(fdto, fragment, "target-path", &path_len); + if (path) + ret = fdt_path_offset(fdt, path); + else + ret = path_len; + } else + ret = fdt_node_offset_by_phandle(fdt, phandle); + + /* + * If we haven't found either a target or a + * target-path property in a node that contains a + * __overlay__ subnode (we wouldn't be called + * otherwise), consider it a improperly written + * overlay + */ + if (ret < 0 && path_len == -FDT_ERR_NOTFOUND) + ret = -FDT_ERR_BADOVERLAY; + + /* return on error */ + if (ret < 0) + return ret; + + /* return pointer to path (if available) */ + if (pathp) + *pathp = path ? path : NULL; + + return ret; +} + +/** + * overlay_phandle_add_offset - Increases a phandle by an offset + * @fdt: Base device tree blob + * @node: Device tree overlay blob + * @name: Name of the property to modify (phandle or linux,phandle) + * @delta: offset to apply + * + * overlay_phandle_add_offset() increments a node phandle by a given + * offset. + * + * returns: + * 0 on success. + * Negative error code on error + */ +static int overlay_phandle_add_offset(void *fdt, int node, + const char *name, uint32_t delta) +{ + const fdt32_t *val; + uint32_t adj_val; + int len; + + val = fdt_getprop(fdt, node, name, &len); + if (!val) + return len; + + if (len != sizeof(*val)) + return -FDT_ERR_BADPHANDLE; + + adj_val = fdt32_to_cpu(*val); + if ((adj_val + delta) < adj_val) + return -FDT_ERR_NOPHANDLES; + + adj_val += delta; + if (adj_val == (uint32_t)-1) + return -FDT_ERR_NOPHANDLES; + + return fdt_setprop_inplace_u32(fdt, node, name, adj_val); +} + +/** + * overlay_adjust_node_phandles - Offsets the phandles of a node + * @fdto: Device tree overlay blob + * @node: Offset of the node we want to adjust + * @delta: Offset to shift the phandles of + * + * overlay_adjust_node_phandles() adds a constant to all the phandles + * of a given node. This is mainly use as part of the overlay + * application process, when we want to update all the overlay + * phandles to not conflict with the overlays of the base device tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_adjust_node_phandles(void *fdto, int node, + uint32_t delta) +{ + int child; + int ret; + + ret = overlay_phandle_add_offset(fdto, node, "phandle", delta); + if (ret && ret != -FDT_ERR_NOTFOUND) + return ret; + + ret = overlay_phandle_add_offset(fdto, node, "linux,phandle", delta); + if (ret && ret != -FDT_ERR_NOTFOUND) + return ret; + + fdt_for_each_subnode(child, fdto, node) { + ret = overlay_adjust_node_phandles(fdto, child, delta); + if (ret) + return ret; + } + + return 0; +} + +/** + * overlay_adjust_local_phandles - Adjust the phandles of a whole overlay + * @fdto: Device tree overlay blob + * @delta: Offset to shift the phandles of + * + * overlay_adjust_local_phandles() adds a constant to all the + * phandles of an overlay. This is mainly use as part of the overlay + * application process, when we want to update all the overlay + * phandles to not conflict with the overlays of the base device tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_adjust_local_phandles(void *fdto, uint32_t delta) +{ + /* + * Start adjusting the phandles from the overlay root + */ + return overlay_adjust_node_phandles(fdto, 0, delta); +} + +/** + * overlay_update_local_node_references - Adjust the overlay references + * @fdto: Device tree overlay blob + * @tree_node: Node offset of the node to operate on + * @fixup_node: Node offset of the matching local fixups node + * @delta: Offset to shift the phandles of + * + * overlay_update_local_nodes_references() update the phandles + * pointing to a node within the device tree overlay by adding a + * constant delta. + * + * This is mainly used as part of a device tree application process, + * where you want the device tree overlays phandles to not conflict + * with the ones from the base device tree before merging them. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_update_local_node_references(void *fdto, + int tree_node, + int fixup_node, + uint32_t delta) +{ + int fixup_prop; + int fixup_child; + int ret; + + fdt_for_each_property_offset(fixup_prop, fdto, fixup_node) { + const fdt32_t *fixup_val; + const char *tree_val; + const char *name; + int fixup_len; + int tree_len; + int i; + + fixup_val = fdt_getprop_by_offset(fdto, fixup_prop, + &name, &fixup_len); + if (!fixup_val) + return fixup_len; + + if (fixup_len % sizeof(uint32_t)) + return -FDT_ERR_BADOVERLAY; + + tree_val = fdt_getprop(fdto, tree_node, name, &tree_len); + if (!tree_val) { + if (tree_len == -FDT_ERR_NOTFOUND) + return -FDT_ERR_BADOVERLAY; + + return tree_len; + } + + for (i = 0; i < (fixup_len / sizeof(uint32_t)); i++) { + fdt32_t adj_val; + uint32_t poffset; + + poffset = fdt32_to_cpu(fixup_val[i]); + + /* + * phandles to fixup can be unaligned. + * + * Use a memcpy for the architectures that do + * not support unaligned accesses. + */ + memcpy(&adj_val, tree_val + poffset, sizeof(adj_val)); + + adj_val = cpu_to_fdt32(fdt32_to_cpu(adj_val) + delta); + + ret = fdt_setprop_inplace_namelen_partial(fdto, + tree_node, + name, + strlen(name), + poffset, + &adj_val, + sizeof(adj_val)); + if (ret == -FDT_ERR_NOSPACE) + return -FDT_ERR_BADOVERLAY; + + if (ret) + return ret; + } + } + + fdt_for_each_subnode(fixup_child, fdto, fixup_node) { + const char *fixup_child_name = fdt_get_name(fdto, fixup_child, + NULL); + int tree_child; + + tree_child = fdt_subnode_offset(fdto, tree_node, + fixup_child_name); + if (tree_child == -FDT_ERR_NOTFOUND) + return -FDT_ERR_BADOVERLAY; + if (tree_child < 0) + return tree_child; + + ret = overlay_update_local_node_references(fdto, + tree_child, + fixup_child, + delta); + if (ret) + return ret; + } + + return 0; +} + +/** + * overlay_update_local_references - Adjust the overlay references + * @fdto: Device tree overlay blob + * @delta: Offset to shift the phandles of + * + * overlay_update_local_references() update all the phandles pointing + * to a node within the device tree overlay by adding a constant + * delta to not conflict with the base overlay. + * + * This is mainly used as part of a device tree application process, + * where you want the device tree overlays phandles to not conflict + * with the ones from the base device tree before merging them. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_update_local_references(void *fdto, uint32_t delta) +{ + int fixups; + + fixups = fdt_path_offset(fdto, "/__local_fixups__"); + if (fixups < 0) { + /* There's no local phandles to adjust, bail out */ + if (fixups == -FDT_ERR_NOTFOUND) + return 0; + + return fixups; + } + + /* + * Update our local references from the root of the tree + */ + return overlay_update_local_node_references(fdto, 0, fixups, + delta); +} + +/** + * overlay_fixup_one_phandle - Set an overlay phandle to the base one + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * @symbols_off: Node offset of the symbols node in the base device tree + * @path: Path to a node holding a phandle in the overlay + * @path_len: number of path characters to consider + * @name: Name of the property holding the phandle reference in the overlay + * @name_len: number of name characters to consider + * @poffset: Offset within the overlay property where the phandle is stored + * @label: Label of the node referenced by the phandle + * + * overlay_fixup_one_phandle() resolves an overlay phandle pointing to + * a node in the base device tree. + * + * This is part of the device tree overlay application process, when + * you want all the phandles in the overlay to point to the actual + * base dt nodes. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_fixup_one_phandle(void *fdt, void *fdto, + int symbols_off, + const char *path, uint32_t path_len, + const char *name, uint32_t name_len, + int poffset, const char *label) +{ + const char *symbol_path; + uint32_t phandle; + fdt32_t phandle_prop; + int symbol_off, fixup_off; + int prop_len; + + if (symbols_off < 0) + return symbols_off; + + symbol_path = fdt_getprop(fdt, symbols_off, label, + &prop_len); + if (!symbol_path) + return prop_len; + + symbol_off = fdt_path_offset(fdt, symbol_path); + if (symbol_off < 0) + return symbol_off; + + phandle = fdt_get_phandle(fdt, symbol_off); + if (!phandle) + return -FDT_ERR_NOTFOUND; + + fixup_off = fdt_path_offset_namelen(fdto, path, path_len); + if (fixup_off == -FDT_ERR_NOTFOUND) + return -FDT_ERR_BADOVERLAY; + if (fixup_off < 0) + return fixup_off; + + phandle_prop = cpu_to_fdt32(phandle); + return fdt_setprop_inplace_namelen_partial(fdto, fixup_off, + name, name_len, poffset, + &phandle_prop, + sizeof(phandle_prop)); +}; + +/** + * overlay_fixup_phandle - Set an overlay phandle to the base one + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * @symbols_off: Node offset of the symbols node in the base device tree + * @property: Property offset in the overlay holding the list of fixups + * + * overlay_fixup_phandle() resolves all the overlay phandles pointed + * to in a __fixups__ property, and updates them to match the phandles + * in use in the base device tree. + * + * This is part of the device tree overlay application process, when + * you want all the phandles in the overlay to point to the actual + * base dt nodes. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_fixup_phandle(void *fdt, void *fdto, int symbols_off, + int property) +{ + const char *value; + const char *label; + int len; + + value = fdt_getprop_by_offset(fdto, property, + &label, &len); + if (!value) { + if (len == -FDT_ERR_NOTFOUND) + return -FDT_ERR_INTERNAL; + + return len; + } + + do { + const char *path, *name, *fixup_end; + const char *fixup_str = value; + uint32_t path_len, name_len; + uint32_t fixup_len; + char *sep, *endptr; + int poffset, ret; + + fixup_end = memchr(value, '\0', len); + if (!fixup_end) + return -FDT_ERR_BADOVERLAY; + fixup_len = fixup_end - fixup_str; + + len -= fixup_len + 1; + value += fixup_len + 1; + + path = fixup_str; + sep = memchr(fixup_str, ':', fixup_len); + if (!sep || *sep != ':') + return -FDT_ERR_BADOVERLAY; + + path_len = sep - path; + if (path_len == (fixup_len - 1)) + return -FDT_ERR_BADOVERLAY; + + fixup_len -= path_len + 1; + name = sep + 1; + sep = memchr(name, ':', fixup_len); + if (!sep || *sep != ':') + return -FDT_ERR_BADOVERLAY; + + name_len = sep - name; + if (!name_len) + return -FDT_ERR_BADOVERLAY; + + poffset = strtoul(sep + 1, &endptr, 10); + if ((*endptr != '\0') || (endptr <= (sep + 1))) + return -FDT_ERR_BADOVERLAY; + + ret = overlay_fixup_one_phandle(fdt, fdto, symbols_off, + path, path_len, name, name_len, + poffset, label); + if (ret) + return ret; + } while (len > 0); + + return 0; +} + +/** + * overlay_fixup_phandles - Resolve the overlay phandles to the base + * device tree + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * + * overlay_fixup_phandles() resolves all the overlay phandles pointing + * to nodes in the base device tree. + * + * This is one of the steps of the device tree overlay application + * process, when you want all the phandles in the overlay to point to + * the actual base dt nodes. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_fixup_phandles(void *fdt, void *fdto) +{ + int fixups_off, symbols_off; + int property; + + /* We can have overlays without any fixups */ + fixups_off = fdt_path_offset(fdto, "/__fixups__"); + if (fixups_off == -FDT_ERR_NOTFOUND) + return 0; /* nothing to do */ + if (fixups_off < 0) + return fixups_off; + + /* And base DTs without symbols */ + symbols_off = fdt_path_offset(fdt, "/__symbols__"); + if ((symbols_off < 0 && (symbols_off != -FDT_ERR_NOTFOUND))) + return symbols_off; + + fdt_for_each_property_offset(property, fdto, fixups_off) { + int ret; + + ret = overlay_fixup_phandle(fdt, fdto, symbols_off, property); + if (ret) + return ret; + } + + return 0; +} + +/** + * overlay_apply_node - Merges a node into the base device tree + * @fdt: Base Device Tree blob + * @target: Node offset in the base device tree to apply the fragment to + * @fdto: Device tree overlay blob + * @node: Node offset in the overlay holding the changes to merge + * + * overlay_apply_node() merges a node into a target base device tree + * node pointed. + * + * This is part of the final step in the device tree overlay + * application process, when all the phandles have been adjusted and + * resolved and you just have to merge overlay into the base device + * tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_apply_node(void *fdt, int target, + void *fdto, int node) +{ + int property; + int subnode; + + fdt_for_each_property_offset(property, fdto, node) { + const char *name; + const void *prop; + int prop_len; + int ret; + + prop = fdt_getprop_by_offset(fdto, property, &name, + &prop_len); + if (prop_len == -FDT_ERR_NOTFOUND) + return -FDT_ERR_INTERNAL; + if (prop_len < 0) + return prop_len; + + ret = fdt_setprop(fdt, target, name, prop, prop_len); + if (ret) + return ret; + } + + fdt_for_each_subnode(subnode, fdto, node) { + const char *name = fdt_get_name(fdto, subnode, NULL); + int nnode; + int ret; + + nnode = fdt_add_subnode(fdt, target, name); + if (nnode == -FDT_ERR_EXISTS) { + nnode = fdt_subnode_offset(fdt, target, name); + if (nnode == -FDT_ERR_NOTFOUND) + return -FDT_ERR_INTERNAL; + } + + if (nnode < 0) + return nnode; + + ret = overlay_apply_node(fdt, nnode, fdto, subnode); + if (ret) + return ret; + } + + return 0; +} + +/** + * overlay_merge - Merge an overlay into its base device tree + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * + * overlay_merge() merges an overlay into its base device tree. + * + * This is the next to last step in the device tree overlay application + * process, when all the phandles have been adjusted and resolved and + * you just have to merge overlay into the base device tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_merge(void *fdt, void *fdto) +{ + int fragment; + + fdt_for_each_subnode(fragment, fdto, 0) { + int overlay; + int target; + int ret; + + /* + * Each fragments will have an __overlay__ node. If + * they don't, it's not supposed to be merged + */ + overlay = fdt_subnode_offset(fdto, fragment, "__overlay__"); + if (overlay == -FDT_ERR_NOTFOUND) + continue; + + if (overlay < 0) + return overlay; + + target = overlay_get_target(fdt, fdto, fragment, NULL); + if (target < 0) + return target; + + ret = overlay_apply_node(fdt, target, fdto, overlay); + if (ret) + return ret; + } + + return 0; +} + +static int get_path_len(const void *fdt, int nodeoffset) +{ + int len = 0, namelen; + const char *name; + + FDT_CHECK_HEADER(fdt); + + for (;;) { + name = fdt_get_name(fdt, nodeoffset, &namelen); + if (!name) + return namelen; + + /* root? we're done */ + if (namelen == 0) + break; + + nodeoffset = fdt_parent_offset(fdt, nodeoffset); + if (nodeoffset < 0) + return nodeoffset; + len += namelen + 1; + } + + /* in case of root pretend it's "/" */ + if (len == 0) + len++; + return len; +} + +/** + * overlay_symbol_update - Update the symbols of base tree after a merge + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * + * overlay_symbol_update() updates the symbols of the base tree with the + * symbols of the applied overlay + * + * This is the last step in the device tree overlay application + * process, allowing the reference of overlay symbols by subsequent + * overlay operations. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_symbol_update(void *fdt, void *fdto) +{ + int root_sym, ov_sym, prop, path_len, fragment, target; + int len, frag_name_len, ret, rel_path_len; + const char *s, *e; + const char *path; + const char *name; + const char *frag_name; + const char *rel_path; + const char *target_path; + char *buf; + void *p; + + ov_sym = fdt_subnode_offset(fdto, 0, "__symbols__"); + + /* if no overlay symbols exist no problem */ + if (ov_sym < 0) + return 0; + + root_sym = fdt_subnode_offset(fdt, 0, "__symbols__"); + + /* it no root symbols exist we should create them */ + if (root_sym == -FDT_ERR_NOTFOUND) + root_sym = fdt_add_subnode(fdt, 0, "__symbols__"); + + /* any error is fatal now */ + if (root_sym < 0) + return root_sym; + + /* iterate over each overlay symbol */ + fdt_for_each_property_offset(prop, fdto, ov_sym) { + path = fdt_getprop_by_offset(fdto, prop, &name, &path_len); + if (!path) + return path_len; + + /* verify it's a string property (terminated by a single \0) */ + if (path_len < 1 || memchr(path, '\0', path_len) != &path[path_len - 1]) + return -FDT_ERR_BADVALUE; + + /* keep end marker to avoid strlen() */ + e = path + path_len; + + /* format: /<fragment-name>/__overlay__/<relative-subnode-path> */ + + if (*path != '/') + return -FDT_ERR_BADVALUE; + + /* get fragment name first */ + s = strchr(path + 1, '/'); + if (!s) + return -FDT_ERR_BADOVERLAY; + + frag_name = path + 1; + frag_name_len = s - path - 1; + + /* verify format; safe since "s" lies in \0 terminated prop */ + len = sizeof("/__overlay__/") - 1; + if ((e - s) < len || memcmp(s, "/__overlay__/", len)) + return -FDT_ERR_BADOVERLAY; + + rel_path = s + len; + rel_path_len = e - rel_path; + + /* find the fragment index in which the symbol lies */ + ret = fdt_subnode_offset_namelen(fdto, 0, frag_name, + frag_name_len); + /* not found? */ + if (ret < 0) + return -FDT_ERR_BADOVERLAY; + fragment = ret; + + /* an __overlay__ subnode must exist */ + ret = fdt_subnode_offset(fdto, fragment, "__overlay__"); + if (ret < 0) + return -FDT_ERR_BADOVERLAY; + + /* get the target of the fragment */ + ret = overlay_get_target(fdt, fdto, fragment, &target_path); + if (ret < 0) + return ret; + target = ret; + + /* if we have a target path use */ + if (!target_path) { + ret = get_path_len(fdt, target); + if (ret < 0) + return ret; + len = ret; + } else { + len = strlen(target_path); + } + + ret = fdt_setprop_placeholder(fdt, root_sym, name, + len + (len > 1) + rel_path_len + 1, &p); + if (ret < 0) + return ret; + + if (!target_path) { + /* again in case setprop_placeholder changed it */ + ret = overlay_get_target(fdt, fdto, fragment, &target_path); + if (ret < 0) + return ret; + target = ret; + } + + buf = p; + if (len > 1) { /* target is not root */ + if (!target_path) { + ret = fdt_get_path(fdt, target, buf, len + 1); + if (ret < 0) + return ret; + } else + memcpy(buf, target_path, len + 1); + + } else + len--; + + buf[len] = '/'; + memcpy(buf + len + 1, rel_path, rel_path_len); + buf[len + 1 + rel_path_len] = '\0'; + } + + return 0; +} + +int fdt_overlay_apply(void *fdt, void *fdto) +{ + uint32_t delta = fdt_get_max_phandle(fdt); + int ret; + + FDT_CHECK_HEADER(fdt); + FDT_CHECK_HEADER(fdto); + + ret = overlay_adjust_local_phandles(fdto, delta); + if (ret) + goto err; + + ret = overlay_update_local_references(fdto, delta); + if (ret) + goto err; + + ret = overlay_fixup_phandles(fdt, fdto); + if (ret) + goto err; + + ret = overlay_merge(fdt, fdto); + if (ret) + goto err; + + ret = overlay_symbol_update(fdt, fdto); + if (ret) + goto err; + + /* + * The overlay has been damaged, erase its magic. + */ + fdt_set_magic(fdto, ~0); + + return 0; + +err: + /* + * The overlay might have been damaged, erase its magic. + */ + fdt_set_magic(fdto, ~0); + + /* + * The base device tree might have been damaged, erase its + * magic. + */ + fdt_set_magic(fdt, ~0); + + return ret; +} diff --git a/scripts/dtc/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c index 3d00d2eee0e3..08de2cce674d 100644 --- a/scripts/dtc/libfdt/fdt_ro.c +++ b/scripts/dtc/libfdt/fdt_ro.c @@ -60,7 +60,7 @@ static int _fdt_nodename_eq(const void *fdt, int offset, { const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1); - if (! p) + if (!p) /* short match */ return 0; @@ -327,7 +327,7 @@ const void *fdt_getprop_namelen(const void *fdt, int nodeoffset, const struct fdt_property *prop; prop = fdt_get_property_namelen(fdt, nodeoffset, name, namelen, lenp); - if (! prop) + if (!prop) return NULL; return prop->data; diff --git a/scripts/dtc/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c index 3fd5847377c9..5c3a2bb0bc6b 100644 --- a/scripts/dtc/libfdt/fdt_rw.c +++ b/scripts/dtc/libfdt/fdt_rw.c @@ -207,7 +207,7 @@ static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name, int err; *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); - if (! (*prop)) + if (!*prop) return oldlen; if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen), @@ -269,8 +269,8 @@ int fdt_set_name(void *fdt, int nodeoffset, const char *name) return 0; } -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len) +int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name, + int len, void **prop_data) { struct fdt_property *prop; int err; @@ -283,8 +283,22 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, if (err) return err; + *prop_data = prop->data; + return 0; +} + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + void *prop_data; + int err; + + err = fdt_setprop_placeholder(fdt, nodeoffset, name, len, &prop_data); + if (err) + return err; + if (len) - memcpy(prop->data, val, len); + memcpy(prop_data, val, len); return 0; } @@ -323,7 +337,7 @@ int fdt_delprop(void *fdt, int nodeoffset, const char *name) FDT_RW_CHECK_HEADER(fdt); prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) + if (!prop) return len; proplen = sizeof(*prop) + FDT_TAGALIGN(len); diff --git a/scripts/dtc/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c index 6a804859fd0c..2bd15e7aef87 100644 --- a/scripts/dtc/libfdt/fdt_sw.c +++ b/scripts/dtc/libfdt/fdt_sw.c @@ -220,7 +220,7 @@ static int _fdt_find_add_string(void *fdt, const char *s) return offset; } -int fdt_property(void *fdt, const char *name, const void *val, int len) +int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp) { struct fdt_property *prop; int nameoff; @@ -238,7 +238,19 @@ int fdt_property(void *fdt, const char *name, const void *val, int len) prop->tag = cpu_to_fdt32(FDT_PROP); prop->nameoff = cpu_to_fdt32(nameoff); prop->len = cpu_to_fdt32(len); - memcpy(prop->data, val, len); + *valp = prop->data; + return 0; +} + +int fdt_property(void *fdt, const char *name, const void *val, int len) +{ + void *ptr; + int ret; + + ret = fdt_property_placeholder(fdt, name, len, &ptr); + if (ret) + return ret; + memcpy(ptr, val, len); return 0; } diff --git a/scripts/dtc/libfdt/fdt_wip.c b/scripts/dtc/libfdt/fdt_wip.c index 6aaab399929c..5e859198622b 100644 --- a/scripts/dtc/libfdt/fdt_wip.c +++ b/scripts/dtc/libfdt/fdt_wip.c @@ -82,7 +82,7 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, int proplen; propval = fdt_getprop(fdt, nodeoffset, name, &proplen); - if (! propval) + if (!propval) return proplen; if (proplen != len) @@ -107,7 +107,7 @@ int fdt_nop_property(void *fdt, int nodeoffset, const char *name) int len; prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) + if (!prop) return len; _fdt_nop_region(prop, len + sizeof(*prop)); diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h index ba86caa73d01..7f83023ee109 100644 --- a/scripts/dtc/libfdt/libfdt.h +++ b/scripts/dtc/libfdt/libfdt.h @@ -1314,6 +1314,22 @@ static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) { return fdt_property_u32(fdt, name, val); } + +/** + * fdt_property_placeholder - add a new property and return a ptr to its value + * + * @fdt: pointer to the device tree blob + * @name: name of property to add + * @len: length of property value in bytes + * @valp: returns a pointer to where where the value should be placed + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_NOSPACE, standard meanings + */ +int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp); + #define fdt_property_string(fdt, name, str) \ fdt_property(fdt, name, str, strlen(str)+1) int fdt_end_node(void *fdt); @@ -1433,6 +1449,37 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, const void *val, int len); /** + * fdt_setprop _placeholder - allocate space for a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @len: length of the property value + * @prop_data: return pointer to property data + * + * fdt_setprop_placeholer() allocates the named property in the given node. + * If the property exists it is resized. In either case a pointer to the + * property data is returned. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name, + int len, void **prop_data); + +/** * fdt_setprop_u32 - set a property to a 32-bit integer * @fdt: pointer to the device tree blob * @nodeoffset: offset of the node whose property to change |