summaryrefslogtreecommitdiffstats
path: root/net
diff options
context:
space:
mode:
Diffstat (limited to 'net')
-rw-r--r--net/mac80211/cfg.c3
-rw-r--r--net/mac80211/ieee80211_i.h4
-rw-r--r--net/mac80211/mlme.c17
-rw-r--r--net/mac80211/rx.c3
-rw-r--r--net/mac80211/util.c113
-rw-r--r--net/mac80211/vht.c10
-rw-r--r--net/rfkill/core.c6
-rw-r--r--net/wireless/nl80211.c5
-rw-r--r--net/wireless/reg.c5
9 files changed, 92 insertions, 74 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index da471eef07bb..c12f348138ac 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1169,8 +1169,7 @@ static int sta_apply_parameters(struct ieee80211_local *local,
* rc isn't initialized here yet, so ignore it
*/
__ieee80211_vht_handle_opmode(sdata, sta,
- params->opmode_notif,
- band, false);
+ params->opmode_notif, band);
}
if (ieee80211_vif_is_mesh(&sdata->vif))
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index d832bd59236b..5322b4c71630 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1709,10 +1709,10 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta);
void ieee80211_sta_set_rx_nss(struct sta_info *sta);
u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
- enum ieee80211_band band, bool nss_only);
+ enum ieee80211_band band);
void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
- enum ieee80211_band band, bool nss_only);
+ enum ieee80211_band band);
void ieee80211_apply_vhtcap_overrides(struct ieee80211_sub_if_data *sdata,
struct ieee80211_sta_vht_cap *vht_cap);
void ieee80211_get_vht_mask_from_cap(__le16 vht_cap,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index b140cc6651f4..3aa04344942b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1379,21 +1379,26 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
*/
if (has_80211h_pwr &&
(!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
+ new_ap_level = pwr_level_80211h;
+
+ if (sdata->ap_power_level == new_ap_level)
+ return 0;
+
sdata_dbg(sdata,
"Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
sdata->u.mgd.bssid);
- new_ap_level = pwr_level_80211h;
} else { /* has_cisco_pwr is always true here. */
+ new_ap_level = pwr_level_cisco;
+
+ if (sdata->ap_power_level == new_ap_level)
+ return 0;
+
sdata_dbg(sdata,
"Limiting TX power to %d dBm as advertised by %pM\n",
pwr_level_cisco, sdata->u.mgd.bssid);
- new_ap_level = pwr_level_cisco;
}
- if (sdata->ap_power_level == new_ap_level)
- return 0;
-
sdata->ap_power_level = new_ap_level;
if (__ieee80211_recalc_txpower(sdata))
return BSS_CHANGED_TXPOWER;
@@ -3575,7 +3580,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
if (sta && elems.opmode_notif)
ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
- rx_status->band, true);
+ rx_status->band);
mutex_unlock(&local->sta_mtx);
changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 8bae5de0dc44..82af407fea7a 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2736,8 +2736,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode;
ieee80211_vht_handle_opmode(rx->sdata, rx->sta,
- opmode, status->band,
- false);
+ opmode, status->band);
goto handled;
}
default:
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 74058020b7d6..33344f5a66a8 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1641,6 +1641,29 @@ void ieee80211_stop_device(struct ieee80211_local *local)
drv_stop(local);
}
+static void ieee80211_flush_completed_scan(struct ieee80211_local *local,
+ bool aborted)
+{
+ /* It's possible that we don't handle the scan completion in
+ * time during suspend, so if it's still marked as completed
+ * here, queue the work and flush it to clean things up.
+ * Instead of calling the worker function directly here, we
+ * really queue it to avoid potential races with other flows
+ * scheduling the same work.
+ */
+ if (test_bit(SCAN_COMPLETED, &local->scanning)) {
+ /* If coming from reconfiguration failure, abort the scan so
+ * we don't attempt to continue a partial HW scan - which is
+ * possible otherwise if (e.g.) the 2.4 GHz portion was the
+ * completed scan, and a 5 GHz portion is still pending.
+ */
+ if (aborted)
+ set_bit(SCAN_ABORTED, &local->scanning);
+ ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0);
+ flush_delayed_work(&local->scan_work);
+ }
+}
+
static void ieee80211_handle_reconfig_failure(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
@@ -1660,6 +1683,8 @@ static void ieee80211_handle_reconfig_failure(struct ieee80211_local *local)
local->suspended = false;
local->in_reconfig = false;
+ ieee80211_flush_completed_scan(local, true);
+
/* scheduled scan clearly can't be running any more, but tell
* cfg80211 and clear local state
*/
@@ -1698,6 +1723,27 @@ static void ieee80211_assign_chanctx(struct ieee80211_local *local,
mutex_unlock(&local->chanctx_mtx);
}
+static void ieee80211_reconfig_stations(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct sta_info *sta;
+
+ /* add STAs back */
+ mutex_lock(&local->sta_mtx);
+ list_for_each_entry(sta, &local->sta_list, list) {
+ enum ieee80211_sta_state state;
+
+ if (!sta->uploaded || sta->sdata != sdata)
+ continue;
+
+ for (state = IEEE80211_STA_NOTEXIST;
+ state < sta->sta_state; state++)
+ WARN_ON(drv_sta_state(local, sta->sdata, sta, state,
+ state + 1));
+ }
+ mutex_unlock(&local->sta_mtx);
+}
+
int ieee80211_reconfig(struct ieee80211_local *local)
{
struct ieee80211_hw *hw = &local->hw;
@@ -1833,50 +1879,11 @@ int ieee80211_reconfig(struct ieee80211_local *local)
WARN_ON(drv_add_chanctx(local, ctx));
mutex_unlock(&local->chanctx_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!ieee80211_sdata_running(sdata))
- continue;
- ieee80211_assign_chanctx(local, sdata);
- }
-
sdata = rtnl_dereference(local->monitor_sdata);
if (sdata && ieee80211_sdata_running(sdata))
ieee80211_assign_chanctx(local, sdata);
}
- /* add STAs back */
- mutex_lock(&local->sta_mtx);
- list_for_each_entry(sta, &local->sta_list, list) {
- enum ieee80211_sta_state state;
-
- if (!sta->uploaded)
- continue;
-
- /* AP-mode stations will be added later */
- if (sta->sdata->vif.type == NL80211_IFTYPE_AP)
- continue;
-
- for (state = IEEE80211_STA_NOTEXIST;
- state < sta->sta_state; state++)
- WARN_ON(drv_sta_state(local, sta->sdata, sta, state,
- state + 1));
- }
- mutex_unlock(&local->sta_mtx);
-
- /* reconfigure tx conf */
- if (hw->queues >= IEEE80211_NUM_ACS) {
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
- sdata->vif.type == NL80211_IFTYPE_MONITOR ||
- !ieee80211_sdata_running(sdata))
- continue;
-
- for (i = 0; i < IEEE80211_NUM_ACS; i++)
- drv_conf_tx(local, sdata, i,
- &sdata->tx_conf[i]);
- }
- }
-
/* reconfigure hardware */
ieee80211_hw_config(local, ~0);
@@ -1889,6 +1896,22 @@ int ieee80211_reconfig(struct ieee80211_local *local)
if (!ieee80211_sdata_running(sdata))
continue;
+ ieee80211_assign_chanctx(local, sdata);
+
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_MONITOR:
+ break;
+ default:
+ ieee80211_reconfig_stations(sdata);
+ /* fall through */
+ case NL80211_IFTYPE_AP: /* AP stations are handled later */
+ for (i = 0; i < IEEE80211_NUM_ACS; i++)
+ drv_conf_tx(local, sdata, i,
+ &sdata->tx_conf[i]);
+ break;
+ }
+
/* common change flags for all interface types */
changed = BSS_CHANGED_ERP_CTS_PROT |
BSS_CHANGED_ERP_PREAMBLE |
@@ -2074,17 +2097,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
mb();
local->resuming = false;
- /* It's possible that we don't handle the scan completion in
- * time during suspend, so if it's still marked as completed
- * here, queue the work and flush it to clean things up.
- * Instead of calling the worker function directly here, we
- * really queue it to avoid potential races with other flows
- * scheduling the same work.
- */
- if (test_bit(SCAN_COMPLETED, &local->scanning)) {
- ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0);
- flush_delayed_work(&local->scan_work);
- }
+ ieee80211_flush_completed_scan(local, false);
if (local->open_count && !reconfig_due_to_wowlan)
drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_SUSPEND);
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index ff1c798921a6..c38b2f07a919 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -378,7 +378,7 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta)
u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
- enum ieee80211_band band, bool nss_only)
+ enum ieee80211_band band)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
@@ -401,9 +401,6 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
changed |= IEEE80211_RC_NSS_CHANGED;
}
- if (nss_only)
- return changed;
-
switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) {
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ:
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20;
@@ -430,13 +427,12 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
- enum ieee80211_band band, bool nss_only)
+ enum ieee80211_band band)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
- u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode,
- band, nss_only);
+ u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode, band);
if (changed > 0)
rate_control_rate_update(local, sband, sta, changed);
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index b41e9ea2ffff..f53bf3b6558b 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -49,7 +49,6 @@
struct rfkill {
spinlock_t lock;
- const char *name;
enum rfkill_type type;
unsigned long state;
@@ -73,6 +72,7 @@ struct rfkill {
struct delayed_work poll_work;
struct work_struct uevent_work;
struct work_struct sync_work;
+ char name[];
};
#define to_rfkill(d) container_of(d, struct rfkill, dev)
@@ -876,14 +876,14 @@ struct rfkill * __must_check rfkill_alloc(const char *name,
if (WARN_ON(type == RFKILL_TYPE_ALL || type >= NUM_RFKILL_TYPES))
return NULL;
- rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL);
+ rfkill = kzalloc(sizeof(*rfkill) + strlen(name) + 1, GFP_KERNEL);
if (!rfkill)
return NULL;
spin_lock_init(&rfkill->lock);
INIT_LIST_HEAD(&rfkill->node);
rfkill->type = type;
- rfkill->name = name;
+ strcpy(rfkill->name, name);
rfkill->ops = ops;
rfkill->data = ops_data;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c71e274c810a..75b0d23ee882 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -7941,8 +7941,10 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
if (nla_get_flag(info->attrs[NL80211_ATTR_USE_RRM])) {
if (!(rdev->wiphy.features &
NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES) ||
- !(rdev->wiphy.features & NL80211_FEATURE_QUIET))
+ !(rdev->wiphy.features & NL80211_FEATURE_QUIET)) {
+ kzfree(connkeys);
return -EINVAL;
+ }
connect.flags |= ASSOC_REQ_USE_RRM;
}
@@ -9503,6 +9505,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
if (new_triggers.tcp && new_triggers.tcp->sock)
sock_release(new_triggers.tcp->sock);
kfree(new_triggers.tcp);
+ kfree(new_triggers.nd_config);
return err;
}
#endif
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 2e8d6f39ed56..06d050da0d94 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -3029,6 +3029,7 @@ int set_regdom(const struct ieee80211_regdomain *rd,
break;
default:
WARN(1, "invalid initiator %d\n", lr->initiator);
+ kfree(rd);
return -EINVAL;
}
@@ -3221,8 +3222,10 @@ int __init regulatory_init(void)
/* We always try to get an update for the static regdomain */
err = regulatory_hint_core(cfg80211_world_regdom->alpha2);
if (err) {
- if (err == -ENOMEM)
+ if (err == -ENOMEM) {
+ platform_device_unregister(reg_pdev);
return err;
+ }
/*
* N.B. kobject_uevent_env() can fail mainly for when we're out
* memory which is handled and propagated appropriately above