diff options
Diffstat (limited to 'net/wireless')
| -rw-r--r-- | net/wireless/Kconfig | 11 | ||||
| -rw-r--r-- | net/wireless/core.c | 5 | ||||
| -rw-r--r-- | net/wireless/core.h | 13 | ||||
| -rw-r--r-- | net/wireless/nl80211.c | 2 | ||||
| -rw-r--r-- | net/wireless/reg.c | 479 | ||||
| -rw-r--r-- | net/wireless/reg.h | 21 |
6 files changed, 507 insertions, 24 deletions
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig index f7c64dbe86cc..e28e2b8fa436 100644 --- a/net/wireless/Kconfig +++ b/net/wireless/Kconfig @@ -1,6 +1,15 @@ config CFG80211 tristate "Improved wireless configuration API" +config CFG80211_REG_DEBUG + bool "cfg80211 regulatory debugging" + depends on CFG80211 + default n + ---help--- + You can enable this if you want to debug regulatory changes. + + If unsure, say N. + config NL80211 bool "nl80211 new netlink interface support" depends on CFG80211 @@ -40,6 +49,8 @@ config WIRELESS_OLD_REGULATORY ieee80211_regdom module parameter. This is being phased out and you should stop using them ASAP. + Note: You will need CRDA if you want 802.11d support + Say Y unless you have installed a new userspace application. Also say Y if have one currently depending on the ieee80211_regdom module parameter and cannot port it to use the new userspace diff --git a/net/wireless/core.c b/net/wireless/core.c index 39e3d10fccde..b96fc0c3f1c4 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -19,7 +19,6 @@ #include "nl80211.h" #include "core.h" #include "sysfs.h" -#include "reg.h" /* name for sysfs, %d is appended */ #define PHY_NAME "phy" @@ -348,6 +347,10 @@ void wiphy_unregister(struct wiphy *wiphy) /* unlock again before freeing */ mutex_unlock(&drv->mtx); + /* If this device got a regulatory hint tell core its + * free to listen now to a new shiny device regulatory hint */ + reg_device_remove(wiphy); + list_del(&drv->list); device_del(&drv->wiphy.dev); debugfs_remove(drv->wiphy.debugfsdir); diff --git a/net/wireless/core.h b/net/wireless/core.h index 771cc5cc7658..f7fb9f413028 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -11,6 +11,7 @@ #include <net/genetlink.h> #include <net/wireless.h> #include <net/cfg80211.h> +#include "reg.h" struct cfg80211_registered_device { struct cfg80211_ops *ops; @@ -21,6 +22,18 @@ struct cfg80211_registered_device { * any call is in progress */ struct mutex mtx; + /* ISO / IEC 3166 alpha2 for which this device is receiving + * country IEs on, this can help disregard country IEs from APs + * on the same alpha2 quickly. The alpha2 may differ from + * cfg80211_regdomain's alpha2 when an intersection has occurred. + * If the AP is reconfigured this can also be used to tell us if + * the country on the country IE changed. */ + char country_ie_alpha2[2]; + + /* If a Country IE has been received this tells us the environment + * which its telling us its in. This defaults to ENVIRON_ANY */ + enum environment_cap env; + /* wiphy index, internal only */ int idx; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index e3e1494e769a..00121ceddb14 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1760,7 +1760,7 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) return -EINVAL; #endif mutex_lock(&cfg80211_drv_mutex); - r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data); + r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data, 0, ENVIRON_ANY); mutex_unlock(&cfg80211_drv_mutex); return r; } diff --git a/net/wireless/reg.c b/net/wireless/reg.c index f0ff3d1779da..4dab993ea488 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -60,12 +60,18 @@ * @intersect: indicates whether the wireless core should intersect * the requested regulatory domain with the presently set regulatory * domain. + * @country_ie_checksum: checksum of the last processed and accepted + * country IE + * @country_ie_env: lets us know if the AP is telling us we are outdoor, + * indoor, or if it doesn't matter */ struct regulatory_request { struct wiphy *wiphy; enum reg_set_by initiator; char alpha2[2]; bool intersect; + u32 country_ie_checksum; + enum environment_cap country_ie_env; }; /* Receipt of information from last regulatory request */ @@ -85,6 +91,11 @@ static u32 supported_bandwidths[] = { * information to give us an alpha2 */ static const struct ieee80211_regdomain *cfg80211_regdomain; +/* We use this as a place for the rd structure built from the + * last parsed country IE to rest until CRDA gets back to us with + * what it thinks should apply for the same country */ +static const struct ieee80211_regdomain *country_ie_regdomain; + /* We keep a static world regulatory domain in case of the absence of CRDA */ static const struct ieee80211_regdomain world_regdom = { .n_reg_rules = 1, @@ -264,6 +275,18 @@ static bool is_unknown_alpha2(const char *alpha2) return false; } +static bool is_intersected_alpha2(const char *alpha2) +{ + if (!alpha2) + return false; + /* Special case where regulatory domain is the + * result of an intersection between two regulatory domain + * structures */ + if (alpha2[0] == '9' && alpha2[1] == '8') + return true; + return false; +} + static bool is_an_alpha2(const char *alpha2) { if (!alpha2) @@ -292,6 +315,25 @@ static bool regdom_changed(const char *alpha2) return true; } +/** + * country_ie_integrity_changes - tells us if the country IE has changed + * @checksum: checksum of country IE of fields we are interested in + * + * If the country IE has not changed you can ignore it safely. This is + * useful to determine if two devices are seeing two different country IEs + * even on the same alpha2. Note that this will return false if no IE has + * been set on the wireless core yet. + */ +static bool country_ie_integrity_changes(u32 checksum) +{ + /* If no IE has been set then the checksum doesn't change */ + if (unlikely(!last_request->country_ie_checksum)) + return false; + if (unlikely(last_request->country_ie_checksum != checksum)) + return true; + return false; +} + /* This lets us keep regulatory code which is updated on a regulatory * basis in userspace. */ static int call_crda(const char *alpha2) @@ -379,6 +421,174 @@ static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range, return 0; } +/* Converts a country IE to a regulatory domain. A regulatory domain + * structure has a lot of information which the IE doesn't yet have, + * so for the other values we use upper max values as we will intersect + * with our userspace regulatory agent to get lower bounds. */ +static struct ieee80211_regdomain *country_ie_2_rd( + u8 *country_ie, + u8 country_ie_len, + u32 *checksum) +{ + struct ieee80211_regdomain *rd = NULL; + unsigned int i = 0; + char alpha2[2]; + u32 flags = 0; + u32 num_rules = 0, size_of_regd = 0; + u8 *triplets_start = NULL; + u8 len_at_triplet = 0; + /* the last channel we have registered in a subband (triplet) */ + int last_sub_max_channel = 0; + + *checksum = 0xDEADBEEF; + + /* Country IE requirements */ + BUG_ON(country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN || + country_ie_len & 0x01); + + alpha2[0] = country_ie[0]; + alpha2[1] = country_ie[1]; + + /* + * Third octet can be: + * 'I' - Indoor + * 'O' - Outdoor + * + * anything else we assume is no restrictions + */ + if (country_ie[2] == 'I') + flags = NL80211_RRF_NO_OUTDOOR; + else if (country_ie[2] == 'O') + flags = NL80211_RRF_NO_INDOOR; + + country_ie += 3; + country_ie_len -= 3; + + triplets_start = country_ie; + len_at_triplet = country_ie_len; + + *checksum ^= ((flags ^ alpha2[0] ^ alpha2[1]) << 8); + + /* We need to build a reg rule for each triplet, but first we must + * calculate the number of reg rules we will need. We will need one + * for each channel subband */ + while (country_ie_len >= 3) { + struct ieee80211_country_ie_triplet *triplet = + (struct ieee80211_country_ie_triplet *) country_ie; + int cur_sub_max_channel = 0, cur_channel = 0; + + if (triplet->ext.reg_extension_id >= + IEEE80211_COUNTRY_EXTENSION_ID) { + country_ie += 3; + country_ie_len -= 3; + continue; + } + + cur_channel = triplet->chans.first_channel; + cur_sub_max_channel = ieee80211_channel_to_frequency( + cur_channel + triplet->chans.num_channels); + + /* Basic sanity check */ + if (cur_sub_max_channel < cur_channel) + return NULL; + + /* Do not allow overlapping channels. Also channels + * passed in each subband must be monotonically + * increasing */ + if (last_sub_max_channel) { + if (cur_channel <= last_sub_max_channel) + return NULL; + if (cur_sub_max_channel <= last_sub_max_channel) + return NULL; + } + + /* When dot11RegulatoryClassesRequired is supported + * we can throw ext triplets as part of this soup, + * for now we don't care when those change as we + * don't support them */ + *checksum ^= ((cur_channel ^ cur_sub_max_channel) << 8) | + ((cur_sub_max_channel ^ cur_sub_max_channel) << 16) | + ((triplet->chans.max_power ^ cur_sub_max_channel) << 24); + + last_sub_max_channel = cur_sub_max_channel; + + country_ie += 3; + country_ie_len -= 3; + num_rules++; + + /* Note: this is not a IEEE requirement but + * simply a memory requirement */ + if (num_rules > NL80211_MAX_SUPP_REG_RULES) + return NULL; + } + + country_ie = triplets_start; + country_ie_len = len_at_triplet; + + size_of_regd = sizeof(struct ieee80211_regdomain) + + (num_rules * sizeof(struct ieee80211_reg_rule)); + + rd = kzalloc(size_of_regd, GFP_KERNEL); + if (!rd) + return NULL; + + rd->n_reg_rules = num_rules; + rd->alpha2[0] = alpha2[0]; + rd->alpha2[1] = alpha2[1]; + + /* This time around we fill in the rd */ + while (country_ie_len >= 3) { + struct ieee80211_country_ie_triplet *triplet = + (struct ieee80211_country_ie_triplet *) country_ie; + struct ieee80211_reg_rule *reg_rule = NULL; + struct ieee80211_freq_range *freq_range = NULL; + struct ieee80211_power_rule *power_rule = NULL; + + /* Must parse if dot11RegulatoryClassesRequired is true, + * we don't support this yet */ + if (triplet->ext.reg_extension_id >= + IEEE80211_COUNTRY_EXTENSION_ID) { + country_ie += 3; + country_ie_len -= 3; + continue; + } + + reg_rule = &rd->reg_rules[i]; + freq_range = ®_rule->freq_range; + power_rule = ®_rule->power_rule; + + reg_rule->flags = flags; + + /* The +10 is since the regulatory domain expects + * the actual band edge, not the center of freq for + * its start and end freqs, assuming 20 MHz bandwidth on + * the channels passed */ + freq_range->start_freq_khz = + MHZ_TO_KHZ(ieee80211_channel_to_frequency( + triplet->chans.first_channel) - 10); + freq_range->end_freq_khz = + MHZ_TO_KHZ(ieee80211_channel_to_frequency( + triplet->chans.first_channel + + triplet->chans.num_channels) + 10); + + /* Large arbitrary values, we intersect later */ + /* Increment this if we ever support >= 40 MHz channels + * in IEEE 802.11 */ + freq_range->max_bandwidth_khz = MHZ_TO_KHZ(40); + power_rule->max_antenna_gain = DBI_TO_MBI(100); + power_rule->max_eirp = DBM_TO_MBM(100); + + country_ie += 3; + country_ie_len -= 3; + i++; + + BUG_ON(i > NL80211_MAX_SUPP_REG_RULES); + } + + return rd; +} + + /* Helper for regdom_intersect(), this does the real * mathematical intersection fun */ static int reg_rules_intersect( @@ -663,16 +873,14 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, return -EOPNOTSUPP; return -EALREADY; } - /* Two consecutive Country IE hints on the same wiphy */ - if (!alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) + /* Two consecutive Country IE hints on the same wiphy. + * This should be picked up early by the driver/stack */ + if (WARN_ON(!alpha2_equal(cfg80211_regdomain->alpha2, + alpha2))) return 0; return -EALREADY; } - /* - * Ignore Country IE hints for now, need to think about - * what we need to do to support multi-domain operation. - */ - return -EOPNOTSUPP; + return REG_INTERSECT; case REGDOM_SET_BY_DRIVER: if (last_request->initiator == REGDOM_SET_BY_DRIVER) return -EALREADY; @@ -680,6 +888,11 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, case REGDOM_SET_BY_USER: if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) return REG_INTERSECT; + /* If the user knows better the user should set the regdom + * to their country before the IE is picked up */ + if (last_request->initiator == REGDOM_SET_BY_USER && + last_request->intersect) + return -EOPNOTSUPP; return 0; } @@ -688,7 +901,9 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, /* Caller must hold &cfg80211_drv_mutex */ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2) + const char *alpha2, + u32 country_ie_checksum, + enum environment_cap env) { struct regulatory_request *request; bool intersect = false; @@ -711,9 +926,21 @@ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, request->initiator = set_by; request->wiphy = wiphy; request->intersect = intersect; + request->country_ie_checksum = country_ie_checksum; + request->country_ie_env = env; kfree(last_request); last_request = request; + /* + * Note: When CONFIG_WIRELESS_OLD_REGULATORY is enabled + * AND if CRDA is NOT present nothing will happen, if someone + * wants to bother with 11d with OLD_REG you can add a timer. + * If after x amount of time nothing happens you can call: + * + * return set_regdom(country_ie_regdomain); + * + * to intersect with the static rd + */ return call_crda(alpha2); } @@ -722,11 +949,120 @@ void regulatory_hint(struct wiphy *wiphy, const char *alpha2) BUG_ON(!alpha2); mutex_lock(&cfg80211_drv_mutex); - __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2); + __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2, 0, ENVIRON_ANY); mutex_unlock(&cfg80211_drv_mutex); } EXPORT_SYMBOL(regulatory_hint); +static bool reg_same_country_ie_hint(struct wiphy *wiphy, + u32 country_ie_checksum) +{ + if (!last_request->wiphy) + return false; + if (likely(last_request->wiphy != wiphy)) + return !country_ie_integrity_changes(country_ie_checksum); + /* We should not have let these through at this point, they + * should have been picked up earlier by the first alpha2 check + * on the device */ + if (WARN_ON(!country_ie_integrity_changes(country_ie_checksum))) + return true; + return false; +} + +void regulatory_hint_11d(struct wiphy *wiphy, + u8 *country_ie, + u8 country_ie_len) +{ + struct ieee80211_regdomain *rd = NULL; + char alpha2[2]; + u32 checksum = 0; + enum environment_cap env = ENVIRON_ANY; + + mutex_lock(&cfg80211_drv_mutex); + + /* IE len must be evenly divisible by 2 */ + if (country_ie_len & 0x01) + goto out; + + if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) + goto out; + + /* Pending country IE processing, this can happen after we + * call CRDA and wait for a response if a beacon was received before + * we were able to process the last regulatory_hint_11d() call */ + if (country_ie_regdomain) + goto out; + + alpha2[0] = country_ie[0]; + alpha2[1] = country_ie[1]; + + if (country_ie[2] == 'I') + env = ENVIRON_INDOOR; + else if (country_ie[2] == 'O') + env = ENVIRON_OUTDOOR; + + /* We will run this for *every* beacon processed for the BSSID, so + * we optimize an early check to exit out early if we don't have to + * do anything */ + if (likely(last_request->wiphy)) { + struct cfg80211_registered_device *drv_last_ie; + + drv_last_ie = wiphy_to_dev(last_request->wiphy); + + /* Lets keep this simple -- we trust the first AP + * after we intersect with CRDA */ + if (likely(last_request->wiphy == wiphy)) { + /* Ignore IEs coming in on this wiphy with + * the same alpha2 and environment cap */ + if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2, + alpha2) && + env == drv_last_ie->env)) { + goto out; + } + /* the wiphy moved on to another BSSID or the AP + * was reconfigured. XXX: We need to deal with the + * case where the user suspends and goes to goes + * to another country, and then gets IEs from an + * AP with different settings */ + goto out; + } else { + /* Ignore IEs coming in on two separate wiphys with + * the same alpha2 and environment cap */ + if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2, + alpha2) && + env == drv_last_ie->env)) { + goto out; + } + /* We could potentially intersect though */ + goto out; + } + } + + rd = country_ie_2_rd(country_ie, country_ie_len, &checksum); + if (!rd) + goto out; + + /* This will not happen right now but we leave it here for the + * the future when we want to add suspend/resume support and having + * the user move to another country after doing so, or having the user + * move to another AP. Right now we just trust the first AP. This is why + * this is marked as likley(). If we hit this before we add this support + * we want to be informed of it as it would indicate a mistake in the + * current design */ + if (likely(WARN_ON(reg_same_country_ie_hint(wiphy, checksum)))) + goto out; + + /* We keep this around for when CRDA comes back with a response so + * we can intersect with that */ + country_ie_regdomain = rd; + + __regulatory_hint(wiphy, REGDOM_SET_BY_COUNTRY_IE, + country_ie_regdomain->alpha2, checksum, env); + +out: + mutex_unlock(&cfg80211_drv_mutex); +} +EXPORT_SYMBOL(regulatory_hint_11d); static void print_rd_rules(const struct ieee80211_regdomain *rd) { @@ -766,7 +1102,25 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd) static void print_regdomain(const struct ieee80211_regdomain *rd) { - if (is_world_regdom(rd->alpha2)) + if (is_intersected_alpha2(rd->alpha2)) { + struct wiphy *wiphy = NULL; + struct cfg80211_registered_device *drv; + + if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) { + if (last_request->wiphy) { + wiphy = last_request->wiphy; + drv = wiphy_to_dev(wiphy); + printk(KERN_INFO "cfg80211: Current regulatory " + "domain updated by AP to: %c%c\n", + drv->country_ie_alpha2[0], + drv->country_ie_alpha2[1]); + } else + printk(KERN_INFO "cfg80211: Current regulatory " + "domain intersected: \n"); + } else + printk(KERN_INFO "cfg80211: Current regulatory " + "intersected: \n"); + } else if (is_world_regdom(rd->alpha2)) printk(KERN_INFO "cfg80211: World regulatory " "domain updated:\n"); else { @@ -789,10 +1143,39 @@ static void print_regdomain_info(const struct ieee80211_regdomain *rd) print_rd_rules(rd); } +#ifdef CONFIG_CFG80211_REG_DEBUG +static void reg_country_ie_process_debug( + const struct ieee80211_regdomain *rd, + const struct ieee80211_regdomain *country_ie_regdomain, + const struct ieee80211_regdomain *intersected_rd) +{ + printk(KERN_DEBUG "cfg80211: Received country IE:\n"); + print_regdomain_info(country_ie_regdomain); + printk(KERN_DEBUG "cfg80211: CRDA thinks this should applied:\n"); + print_regdomain_info(rd); + if (intersected_rd) { + printk(KERN_DEBUG "cfg80211: We intersect both of these " + "and get:\n"); + print_regdomain_info(rd); + return; + } + printk(KERN_DEBUG "cfg80211: Intersection between both failed\n"); +} +#else +static inline void reg_country_ie_process_debug( + const struct ieee80211_regdomain *rd, + const struct ieee80211_regdomain *country_ie_regdomain, + const struct ieee80211_regdomain *intersected_rd) +{ +} +#endif + /* Takes ownership of rd only if it doesn't fail */ static int __set_regdom(const struct ieee80211_regdomain *rd) { const struct ieee80211_regdomain *intersected_rd = NULL; + struct cfg80211_registered_device *drv = NULL; + struct wiphy *wiphy = NULL; /* Some basic sanity checks first */ if (is_world_regdom(rd->alpha2)) { @@ -809,10 +1192,18 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (!last_request) return -EINVAL; - /* allow overriding the static definitions if CRDA is present */ - if (!is_old_static_regdom(cfg80211_regdomain) && - !regdom_changed(rd->alpha2)) - return -EINVAL; + /* Lets only bother proceeding on the same alpha2 if the current + * rd is non static (it means CRDA was present and was used last) + * and the pending request came in from a country IE */ + if (last_request->initiator != REGDOM_SET_BY_COUNTRY_IE) { + /* If someone else asked us to change the rd lets only bother + * checking if the alpha2 changes if CRDA was already called */ + if (!is_old_static_regdom(cfg80211_regdomain) && + !regdom_changed(rd->alpha2)) + return -EINVAL; + } + + wiphy = last_request->wiphy; /* Now lets set the regulatory domain, update all driver channels * and finally inform them of what we have done, in case they want @@ -853,9 +1244,47 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) return 0; } - /* Country IE parsing coming soon */ + /* + * Country IE requests are handled a bit differently, we intersect + * the country IE rd with what CRDA believes that country should have + */ + + BUG_ON(!country_ie_regdomain); + + if (rd != country_ie_regdomain) { + /* Intersect what CRDA returned and our what we + * had built from the Country IE received */ + + intersected_rd = regdom_intersect(rd, country_ie_regdomain); + + reg_country_ie_process_debug(rd, country_ie_regdomain, + intersected_rd); + + kfree(country_ie_regdomain); + country_ie_regdomain = NULL; + } else { + /* This would happen when CRDA was not present and + * OLD_REGULATORY was enabled. We intersect our Country + * IE rd and what was set on cfg80211 originally */ + intersected_rd = regdom_intersect(rd, cfg80211_regdomain); + } + + if (!intersected_rd) + return -EINVAL; + + drv = wiphy_to_dev(wiphy); + + drv->country_ie_alpha2[0] = rd->alpha2[0]; + drv->country_ie_alpha2[1] = rd->alpha2[1]; + drv->env = last_request->country_ie_env; + + BUG_ON(intersected_rd == rd); + + kfree(rd); + rd = NULL; + reset_regdomains(); - WARN_ON(1); + cfg80211_regdomain = intersected_rd; return 0; } @@ -887,6 +1316,17 @@ int set_regdom(const struct ieee80211_regdomain *rd) return r; } +/* Caller must hold cfg80211_drv_mutex */ +void reg_device_remove(struct wiphy *wiphy) +{ + if (!last_request->wiphy) + return; + if (last_request->wiphy != wiphy) + return; + last_request->wiphy = NULL; + last_request->country_ie_env = ENVIRON_ANY; +} + int regulatory_init(void) { int err; @@ -906,11 +1346,11 @@ int regulatory_init(void) * that is not a valid ISO / IEC 3166 alpha2 */ if (ieee80211_regdom[0] != 'E' || ieee80211_regdom[1] != 'U') err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, - ieee80211_regdom); + ieee80211_regdom, 0, ENVIRON_ANY); #else cfg80211_regdomain = cfg80211_world_regdom; - err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00"); + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00", 0, ENVIRON_ANY); if (err) printk(KERN_ERR "cfg80211: calling CRDA failed - " "unable to update world regulatory domain, " @@ -926,6 +1366,9 @@ void regulatory_exit(void) reset_regdomains(); + kfree(country_ie_regdomain); + country_ie_regdomain = NULL; + kfree(last_request); platform_device_unregister(reg_pdev); diff --git a/net/wireless/reg.h b/net/wireless/reg.h index c9b6b6358bbe..a76ea3ff7cd6 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -4,28 +4,41 @@ bool is_world_regdom(const char *alpha2); bool reg_is_valid_request(const char *alpha2); +void reg_device_remove(struct wiphy *wiphy); + int regulatory_init(void); void regulatory_exit(void); int set_regdom(const struct ieee80211_regdomain *rd); +enum environment_cap { + ENVIRON_ANY, + ENVIRON_INDOOR, + ENVIRON_OUTDOOR, +}; + + /** * __regulatory_hint - hint to the wireless core a regulatory domain * @wiphy: if the hint comes from country information from an AP, this * is required to be set to the wiphy that received the information * @alpha2: the ISO/IEC 3166 alpha2 being claimed the regulatory domain * should be in. + * @country_ie_checksum: checksum of processed country IE, set this to 0 + * if the hint did not come from a country IE + * @country_ie_env: the environment the IE told us we are in, %ENVIRON_* * * The Wireless subsystem can use this function to hint to the wireless core - * what it believes should be the current regulatory domain by - * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory - * domain should be in. + * what it believes should be the current regulatory domain by giving it an + * ISO/IEC 3166 alpha2 country code it knows its regulatory domain should be + * in. * * Returns zero if all went fine, %-EALREADY if a regulatory domain had * already been set or other standard error codes. * */ extern int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2); + const char *alpha2, u32 country_ie_checksum, + enum environment_cap country_ie_env); #endif /* __NET_WIRELESS_REG_H */ |