1 files changed, 101 insertions, 59 deletions

diff --git a/net/sunrpc/xprtrdma/svc_rdma_rw.c b/net/sunrpc/xprtrdma/svc_rdma_rw.c
index 3154c7ab1ca8..2d454e37b2fe 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_rw.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_rw.c
@@ -258,8 +258,8 @@ static void svc_rdma_write_done(struct ib_cq *cq, struct ib_wc *wc)
 /* State for pulling a Read chunk.
  */
 struct svc_rdma_read_info {
+	struct svc_rqst			*ri_rqst;
 	struct svc_rdma_recv_ctxt	*ri_readctxt;
-	unsigned int			ri_position;
 	unsigned int			ri_pageno;
 	unsigned int			ri_pageoff;
 	unsigned int			ri_totalbytes;
@@ -658,17 +658,29 @@ out_err:
 	return ret;
 }
 
+/**
+ * svc_rdma_build_read_segment - Build RDMA Read WQEs to pull one RDMA segment
+ * @info: context for ongoing I/O
+ * @segment: co-ordinates of remote memory to be read
+ *
+ * Returns:
+ *   %0: the Read WR chain was constructed successfully
+ *   %-EINVAL: there were not enough rq_pages to finish
+ *   %-ENOMEM: allocating a local resources failed
+ *   %-EIO: a DMA mapping error occurred
+ */
 static int svc_rdma_build_read_segment(struct svc_rdma_read_info *info,
-				       struct svc_rqst *rqstp,
-				       u32 rkey, u32 len, u64 offset)
+				       const struct svc_rdma_segment *segment)
 {
 	struct svc_rdma_recv_ctxt *head = info->ri_readctxt;
 	struct svc_rdma_chunk_ctxt *cc = &info->ri_cc;
+	struct svc_rqst *rqstp = info->ri_rqst;
 	struct svc_rdma_rw_ctxt *ctxt;
-	unsigned int sge_no, seg_len;
+	unsigned int sge_no, seg_len, len;
 	struct scatterlist *sg;
 	int ret;
 
+	len = segment->rs_length;
 	sge_no = PAGE_ALIGN(info->ri_pageoff + len) >> PAGE_SHIFT;
 	ctxt = svc_rdma_get_rw_ctxt(cc->cc_rdma, sge_no);
 	if (!ctxt)
@@ -702,8 +714,8 @@ static int svc_rdma_build_read_segment(struct svc_rdma_read_info *info,
 			goto out_overrun;
 	}
 
-	ret = svc_rdma_rw_ctx_init(cc->cc_rdma, ctxt, offset, rkey,
-				   DMA_FROM_DEVICE);
+	ret = svc_rdma_rw_ctx_init(cc->cc_rdma, ctxt, segment->rs_offset,
+				   segment->rs_handle, DMA_FROM_DEVICE);
 	if (ret < 0)
 		return -EIO;
 
@@ -716,48 +728,63 @@ out_overrun:
 	return -EINVAL;
 }
 
-/* Walk the segments in the Read chunk starting at @p and construct
- * RDMA Read operations to pull the chunk to the server.
+/**
+ * svc_rdma_build_read_chunk - Build RDMA Read WQEs to pull one RDMA chunk
+ * @info: context for ongoing I/O
+ * @chunk: Read chunk to pull
+ *
+ * Return values:
+ *   %0: the Read WR chain was constructed successfully
+ *   %-EINVAL: there were not enough resources to finish
+ *   %-ENOMEM: allocating a local resources failed
+ *   %-EIO: a DMA mapping error occurred
  */
-static int svc_rdma_build_read_chunk(struct svc_rqst *rqstp,
-				     struct svc_rdma_read_info *info,
-				     __be32 *p)
+static int svc_rdma_build_read_chunk(struct svc_rdma_read_info *info,
+				     const struct svc_rdma_chunk *chunk)
 {
+	const struct svc_rdma_segment *segment;
 	int ret;
 
 	ret = -EINVAL;
-	while (*p++ != xdr_zero && be32_to_cpup(p++) == info->ri_position) {
-		u32 handle, length;
-		u64 offset;
-
-		p = xdr_decode_rdma_segment(p, &handle, &length, &offset);
-		ret = svc_rdma_build_read_segment(info, rqstp, handle, length,
-						  offset);
+	pcl_for_each_segment(segment, chunk) {
+		ret = svc_rdma_build_read_segment(info, segment);
 		if (ret < 0)
 			break;
-
-		info->ri_totalbytes += length;
+		info->ri_totalbytes += segment->rs_length;
 	}
 	return ret;
 }
 
-/* Construct RDMA Reads to pull over a normal Read chunk. The chunk
- * data lands in the page list of head->rc_arg.pages.
+/**
+ * svc_rdma_read_data_items - Construct RDMA Reads to pull data item Read chunks
+ * @info: context for RDMA Reads
+ *
+ * The chunk data lands in the page list of head->rc_arg.pages.
  *
  * Currently NFSD does not look at the head->rc_arg.tail[0] iovec.
  * Therefore, XDR round-up of the Read chunk and trailing
  * inline content must both be added at the end of the pagelist.
+ *
+ * Return values:
+ *   %0: RDMA Read WQEs were successfully built
+ *   %-EINVAL: client provided too many chunks or segments,
+ *   %-ENOMEM: rdma_rw context pool was exhausted,
+ *   %-ENOTCONN: posting failed (connection is lost),
+ *   %-EIO: rdma_rw initialization failed (DMA mapping, etc).
  */
-static int svc_rdma_build_normal_read_chunk(struct svc_rqst *rqstp,
-					    struct svc_rdma_read_info *info,
-					    __be32 *p)
+static int svc_rdma_read_data_items(struct svc_rdma_read_info *info)
 {
 	struct svc_rdma_recv_ctxt *head = info->ri_readctxt;
 	struct xdr_buf *buf = &head->rc_arg;
+	struct svc_rdma_chunk *chunk;
 	unsigned int length;
 	int ret;
 
-	ret = svc_rdma_build_read_chunk(rqstp, info, p);
+	if (head->rc_read_pcl.cl_count > 1)
+		return -EINVAL;
+
+	chunk = pcl_first_chunk(&head->rc_read_pcl);
+	ret = svc_rdma_build_read_chunk(info, chunk);
 	if (ret < 0)
 		goto out;
 
@@ -768,11 +795,9 @@ static int svc_rdma_build_normal_read_chunk(struct svc_rqst *rqstp,
 	 * chunk is not included in either the pagelist or in
 	 * the tail.
 	 */
-	head->rc_arg.tail[0].iov_base =
-		head->rc_arg.head[0].iov_base + info->ri_position;
-	head->rc_arg.tail[0].iov_len =
-		head->rc_arg.head[0].iov_len - info->ri_position;
-	head->rc_arg.head[0].iov_len = info->ri_position;
+	buf->tail[0].iov_base = buf->head[0].iov_base + chunk->ch_position;
+	buf->tail[0].iov_len = buf->head[0].iov_len - chunk->ch_position;
+	buf->head[0].iov_len = chunk->ch_position;
 
 	/* Read chunk may need XDR roundup (see RFC 8166, s. 3.4.5.2).
 	 *
@@ -792,26 +817,36 @@ out:
 	return ret;
 }
 
-/* Construct RDMA Reads to pull over a Position Zero Read chunk.
- * The start of the data lands in the first page just after
- * the Transport header, and the rest lands in the page list of
+/**
+ * svc_rdma_read_special - Build RDMA Read WQEs to pull a Long Message
+ * @info: context for RDMA Reads
+ *
+ * The start of the data lands in the first page just after the
+ * Transport header, and the rest lands in the page list of
  * head->rc_arg.pages.
  *
  * Assumptions:
- *	- A PZRC has an XDR-aligned length (no implicit round-up).
- *	- There can be no trailing inline content (IOW, we assume
- *	  a PZRC is never sent in an RDMA_MSG message, though it's
- *	  allowed by spec).
+ *	- A PZRC is never sent in an RDMA_MSG message, though it's
+ *	  allowed by spec.
+ *
+ * Return values:
+ *   %0: RDMA Read WQEs were successfully built
+ *   %-EINVAL: client provided too many chunks or segments,
+ *   %-ENOMEM: rdma_rw context pool was exhausted,
+ *   %-ENOTCONN: posting failed (connection is lost),
+ *   %-EIO: rdma_rw initialization failed (DMA mapping, etc).
  */
-static int svc_rdma_build_pz_read_chunk(struct svc_rqst *rqstp,
-					struct svc_rdma_read_info *info,
-					__be32 *p)
+static int svc_rdma_read_special(struct svc_rdma_read_info *info)
 {
 	struct svc_rdma_recv_ctxt *head = info->ri_readctxt;
 	struct xdr_buf *buf = &head->rc_arg;
 	int ret;
 
-	ret = svc_rdma_build_read_chunk(rqstp, info, p);
+	if (head->rc_call_pcl.cl_count > 1)
+		return -EINVAL;
+
+	ret = svc_rdma_build_read_chunk(info,
+					pcl_first_chunk(&head->rc_call_pcl));
 	if (ret < 0)
 		goto out;
 
@@ -848,24 +883,31 @@ static void svc_rdma_save_io_pages(struct svc_rqst *rqstp,
 }
 
 /**
- * svc_rdma_recv_read_chunk - Pull a Read chunk from the client
+ * svc_rdma_process_read_list - Pull list of Read chunks from the client
  * @rdma: controlling RDMA transport
  * @rqstp: set of pages to use as Read sink buffers
  * @head: pages under I/O collect here
- * @p: pointer to start of Read chunk
  *
- * Returns:
- *	%0 if all needed RDMA Reads were posted successfully,
- *	%-EINVAL if client provided too many segments,
- *	%-ENOMEM if rdma_rw context pool was exhausted,
- *	%-ENOTCONN if posting failed (connection is lost),
- *	%-EIO if rdma_rw initialization failed (DMA mapping, etc).
+ * The RPC/RDMA protocol assumes that the upper layer's XDR decoders
+ * pull each Read chunk as they decode an incoming RPC message.
  *
- * Assumptions:
- * - All Read segments in @p have the same Position value.
+ * On Linux, however, the server needs to have a fully-constructed RPC
+ * message in rqstp->rq_arg when there is a positive return code from
+ * ->xpo_recvfrom. So the Read list is safety-checked immediately when
+ * it is received, then here the whole Read list is pulled all at once.
+ * The ingress RPC message is fully reconstructed once all associated
+ * RDMA Reads have completed.
+ *
+ * Return values:
+ *   %1: all needed RDMA Reads were posted successfully,
+ *   %-EINVAL: client provided too many chunks or segments,
+ *   %-ENOMEM: rdma_rw context pool was exhausted,
+ *   %-ENOTCONN: posting failed (connection is lost),
+ *   %-EIO: rdma_rw initialization failed (DMA mapping, etc).
  */
-int svc_rdma_recv_read_chunk(struct svcxprt_rdma *rdma, struct svc_rqst *rqstp,
-			     struct svc_rdma_recv_ctxt *head, __be32 *p)
+int svc_rdma_process_read_list(struct svcxprt_rdma *rdma,
+			       struct svc_rqst *rqstp,
+			       struct svc_rdma_recv_ctxt *head)
 {
 	struct svc_rdma_read_info *info;
 	struct svc_rdma_chunk_ctxt *cc;
@@ -887,16 +929,16 @@ int svc_rdma_recv_read_chunk(struct svcxprt_rdma *rdma, struct svc_rqst *rqstp,
 	if (!info)
 		return -ENOMEM;
 	cc = &info->ri_cc;
+	info->ri_rqst = rqstp;
 	info->ri_readctxt = head;
 	info->ri_pageno = 0;
 	info->ri_pageoff = 0;
 	info->ri_totalbytes = 0;
 
-	info->ri_position = be32_to_cpup(p + 1);
-	if (info->ri_position)
-		ret = svc_rdma_build_normal_read_chunk(rqstp, info, p);
+	if (pcl_is_empty(&head->rc_call_pcl))
+		ret = svc_rdma_read_data_items(info);
 	else
-		ret = svc_rdma_build_pz_read_chunk(rqstp, info, p);
+		ret = svc_rdma_read_special(info);
 	if (ret < 0)
 		goto out_err;
 
@@ -905,7 +947,7 @@ int svc_rdma_recv_read_chunk(struct svcxprt_rdma *rdma, struct svc_rqst *rqstp,
 	if (ret < 0)
 		goto out_err;
 	svc_rdma_save_io_pages(rqstp, 0, head->rc_page_count);
-	return 0;
+	return 1;
 
 out_err:
 	svc_rdma_read_info_free(info);