summaryrefslogtreecommitdiffstats
path: root/net/mac80211/mesh_plink.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211/mesh_plink.c')
-rw-r--r--net/mac80211/mesh_plink.c70
1 files changed, 37 insertions, 33 deletions
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 60ef235c9d9b..af671b984df3 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -13,12 +13,6 @@
#include "rate.h"
#include "mesh.h"
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
-#define mpl_dbg(fmt, args...) printk(KERN_DEBUG fmt, ##args)
-#else
-#define mpl_dbg(fmt, args...) do { (void)(0); } while (0)
-#endif
-
#define PLINK_GET_LLID(p) (p + 2)
#define PLINK_GET_PLID(p) (p + 4)
@@ -105,7 +99,7 @@ static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
return sta;
}
-/*
+/**
* mesh_set_ht_prot_mode - set correct HT protection mode
*
* Section 9.23.3.5 of IEEE 80211-2012 describes the protection rules for HT
@@ -134,12 +128,14 @@ static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata)
switch (sta->ch_type) {
case NL80211_CHAN_NO_HT:
- mpl_dbg("mesh_plink %pM: nonHT sta (%pM) is present",
+ mpl_dbg(sdata,
+ "mesh_plink %pM: nonHT sta (%pM) is present\n",
sdata->vif.addr, sta->sta.addr);
non_ht_sta = true;
goto out;
case NL80211_CHAN_HT20:
- mpl_dbg("mesh_plink %pM: HT20 sta (%pM) is present",
+ mpl_dbg(sdata,
+ "mesh_plink %pM: HT20 sta (%pM) is present\n",
sdata->vif.addr, sta->sta.addr);
ht20_sta = true;
default:
@@ -160,7 +156,8 @@ out:
sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
sdata->u.mesh.mshcfg.ht_opmode = ht_opmode;
changed = BSS_CHANGED_HT;
- mpl_dbg("mesh_plink %pM: protection mode changed to %d",
+ mpl_dbg(sdata,
+ "mesh_plink %pM: protection mode changed to %d\n",
sdata->vif.addr, ht_opmode);
}
@@ -261,8 +258,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
pos = skb_put(skb, 2);
memcpy(pos + 2, &plid, 2);
}
- if (ieee80211_add_srates_ie(&sdata->vif, skb, true) ||
- ieee80211_add_ext_srates_ie(&sdata->vif, skb, true) ||
+ if (ieee80211_add_srates_ie(sdata, skb, true) ||
+ ieee80211_add_ext_srates_ie(sdata, skb, true) ||
mesh_add_rsn_ie(skb, sdata) ||
mesh_add_meshid_ie(skb, sdata) ||
mesh_add_meshconf_ie(skb, sdata))
@@ -323,7 +320,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
return 0;
}
-/* mesh_peer_init - initialize new mesh peer and return resulting sta_info
+/**
+ * mesh_peer_init - initialize new mesh peer and return resulting sta_info
*
* @sdata: local meshif
* @addr: peer's address
@@ -437,7 +435,8 @@ static void mesh_plink_timer(unsigned long data)
spin_unlock_bh(&sta->lock);
return;
}
- mpl_dbg("Mesh plink timer for %pM fired on state %d\n",
+ mpl_dbg(sta->sdata,
+ "Mesh plink timer for %pM fired on state %d\n",
sta->sta.addr, sta->plink_state);
reason = 0;
llid = sta->llid;
@@ -450,7 +449,8 @@ static void mesh_plink_timer(unsigned long data)
/* retry timer */
if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
u32 rand;
- mpl_dbg("Mesh plink for %pM (retry, timeout): %d %d\n",
+ mpl_dbg(sta->sdata,
+ "Mesh plink for %pM (retry, timeout): %d %d\n",
sta->sta.addr, sta->plink_retries,
sta->plink_timeout);
get_random_bytes(&rand, sizeof(u32));
@@ -530,7 +530,8 @@ int mesh_plink_open(struct sta_info *sta)
sta->plink_state = NL80211_PLINK_OPN_SNT;
mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
spin_unlock_bh(&sta->lock);
- mpl_dbg("Mesh plink: starting establishment with %pM\n",
+ mpl_dbg(sdata,
+ "Mesh plink: starting establishment with %pM\n",
sta->sta.addr);
return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
@@ -565,7 +566,6 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
u8 *baseaddr;
u32 changed = 0;
__le16 plid, llid, reason;
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
static const char *mplstates[] = {
[NL80211_PLINK_LISTEN] = "LISTEN",
[NL80211_PLINK_OPN_SNT] = "OPN-SNT",
@@ -575,14 +575,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
[NL80211_PLINK_HOLDING] = "HOLDING",
[NL80211_PLINK_BLOCKED] = "BLOCKED"
};
-#endif
/* need action_code, aux */
if (len < IEEE80211_MIN_ACTION_SIZE + 3)
return;
if (is_multicast_ether_addr(mgmt->da)) {
- mpl_dbg("Mesh plink: ignore frame from multicast address");
+ mpl_dbg(sdata,
+ "Mesh plink: ignore frame from multicast address\n");
return;
}
@@ -595,12 +595,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
}
ieee802_11_parse_elems(baseaddr, len - baselen, &elems);
if (!elems.peering) {
- mpl_dbg("Mesh plink: missing necessary peer link ie\n");
+ mpl_dbg(sdata,
+ "Mesh plink: missing necessary peer link ie\n");
return;
}
if (elems.rsn_len &&
sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) {
- mpl_dbg("Mesh plink: can't establish link with secure peer\n");
+ mpl_dbg(sdata,
+ "Mesh plink: can't establish link with secure peer\n");
return;
}
@@ -610,14 +612,15 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
(ftype == WLAN_SP_MESH_PEERING_CONFIRM && ie_len != 6) ||
(ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len != 6
&& ie_len != 8)) {
- mpl_dbg("Mesh plink: incorrect plink ie length %d %d\n",
- ftype, ie_len);
+ mpl_dbg(sdata,
+ "Mesh plink: incorrect plink ie length %d %d\n",
+ ftype, ie_len);
return;
}
if (ftype != WLAN_SP_MESH_PEERING_CLOSE &&
(!elems.mesh_id || !elems.mesh_config)) {
- mpl_dbg("Mesh plink: missing necessary ie\n");
+ mpl_dbg(sdata, "Mesh plink: missing necessary ie\n");
return;
}
/* Note the lines below are correct, the llid in the frame is the plid
@@ -632,21 +635,21 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
sta = sta_info_get(sdata, mgmt->sa);
if (!sta && ftype != WLAN_SP_MESH_PEERING_OPEN) {
- mpl_dbg("Mesh plink: cls or cnf from unknown peer\n");
+ mpl_dbg(sdata, "Mesh plink: cls or cnf from unknown peer\n");
rcu_read_unlock();
return;
}
if (ftype == WLAN_SP_MESH_PEERING_OPEN &&
!rssi_threshold_check(sta, sdata)) {
- mpl_dbg("Mesh plink: %pM does not meet rssi threshold\n",
+ mpl_dbg(sdata, "Mesh plink: %pM does not meet rssi threshold\n",
mgmt->sa);
rcu_read_unlock();
return;
}
if (sta && !test_sta_flag(sta, WLAN_STA_AUTH)) {
- mpl_dbg("Mesh plink: Action frame from non-authed peer\n");
+ mpl_dbg(sdata, "Mesh plink: Action frame from non-authed peer\n");
rcu_read_unlock();
return;
}
@@ -683,7 +686,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
} else if (!sta) {
/* ftype == WLAN_SP_MESH_PEERING_OPEN */
if (!mesh_plink_free_count(sdata)) {
- mpl_dbg("Mesh plink error: no more free plinks\n");
+ mpl_dbg(sdata, "Mesh plink error: no more free plinks\n");
rcu_read_unlock();
return;
}
@@ -724,7 +727,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
event = CLS_ACPT;
break;
default:
- mpl_dbg("Mesh plink: unknown frame subtype\n");
+ mpl_dbg(sdata, "Mesh plink: unknown frame subtype\n");
rcu_read_unlock();
return;
}
@@ -734,13 +737,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
/* allocate sta entry if necessary and update info */
sta = mesh_peer_init(sdata, mgmt->sa, &elems);
if (!sta) {
- mpl_dbg("Mesh plink: failed to init peer!\n");
+ mpl_dbg(sdata, "Mesh plink: failed to init peer!\n");
rcu_read_unlock();
return;
}
}
- mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n",
+ mpl_dbg(sdata,
+ "Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n",
mgmt->sa, mplstates[sta->plink_state],
le16_to_cpu(sta->llid), le16_to_cpu(sta->plid),
event);
@@ -851,7 +855,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
mesh_plink_inc_estab_count(sdata);
changed |= mesh_set_ht_prot_mode(sdata);
changed |= BSS_CHANGED_BEACON;
- mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
+ mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n",
sta->sta.addr);
break;
default:
@@ -887,7 +891,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
mesh_plink_inc_estab_count(sdata);
changed |= mesh_set_ht_prot_mode(sdata);
changed |= BSS_CHANGED_BEACON;
- mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
+ mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n",
sta->sta.addr);
mesh_plink_frame_tx(sdata,
WLAN_SP_MESH_PEERING_CONFIRM,
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 16:29:24 +0000