summaryrefslogtreecommitdiffstats
path: root/kernel/time
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/time')
-rw-r--r--kernel/time/clocksource.c48
-rw-r--r--kernel/time/ntp.c2
-rw-r--r--kernel/time/timekeeping.c35
3 files changed, 65 insertions, 20 deletions
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 1f5dde637457..f08e99c1d561 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -625,6 +625,54 @@ static void clocksource_enqueue(struct clocksource *cs)
list_add(&cs->list, entry);
}
+
+/*
+ * Maximum time we expect to go between ticks. This includes idle
+ * tickless time. It provides the trade off between selecting a
+ * mult/shift pair that is very precise but can only handle a short
+ * period of time, vs. a mult/shift pair that can handle long periods
+ * of time but isn't as precise.
+ *
+ * This is a subsystem constant, and actual hardware limitations
+ * may override it (ie: clocksources that wrap every 3 seconds).
+ */
+#define MAX_UPDATE_LENGTH 5 /* Seconds */
+
+/**
+ * __clocksource_register_scale - Used to install new clocksources
+ * @t: clocksource to be registered
+ * @scale: Scale factor multiplied against freq to get clocksource hz
+ * @freq: clocksource frequency (cycles per second) divided by scale
+ *
+ * Returns -EBUSY if registration fails, zero otherwise.
+ *
+ * This *SHOULD NOT* be called directly! Please use the
+ * clocksource_register_hz() or clocksource_register_khz helper functions.
+ */
+int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
+{
+
+ /*
+ * Ideally we want to use some of the limits used in
+ * clocksource_max_deferment, to provide a more informed
+ * MAX_UPDATE_LENGTH. But for now this just gets the
+ * register interface working properly.
+ */
+ clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
+ NSEC_PER_SEC/scale,
+ MAX_UPDATE_LENGTH*scale);
+ cs->max_idle_ns = clocksource_max_deferment(cs);
+
+ mutex_lock(&clocksource_mutex);
+ clocksource_enqueue(cs);
+ clocksource_select();
+ clocksource_enqueue_watchdog(cs);
+ mutex_unlock(&clocksource_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__clocksource_register_scale);
+
+
/**
* clocksource_register - Used to install new clocksources
* @t: clocksource to be registered
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 7c0f180d6e9d..c63116863a80 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -69,7 +69,7 @@ static s64 time_freq;
/* time at last adjustment (secs): */
static long time_reftime;
-long time_adjust;
+static long time_adjust;
/* constant (boot-param configurable) NTP tick adjustment (upscaled) */
static s64 ntp_tick_adj;
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 39f6177fafac..caf8d4d4f5c8 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -165,13 +165,6 @@ struct timespec raw_time;
/* flag for if timekeeping is suspended */
int __read_mostly timekeeping_suspended;
-static struct timespec xtime_cache __attribute__ ((aligned (16)));
-void update_xtime_cache(u64 nsec)
-{
- xtime_cache = xtime;
- timespec_add_ns(&xtime_cache, nsec);
-}
-
/* must hold xtime_lock */
void timekeeping_leap_insert(int leapsecond)
{
@@ -332,8 +325,6 @@ int do_settimeofday(struct timespec *tv)
xtime = *tv;
- update_xtime_cache(0);
-
timekeeper.ntp_error = 0;
ntp_clear();
@@ -559,7 +550,6 @@ void __init timekeeping_init(void)
}
set_normalized_timespec(&wall_to_monotonic,
-boot.tv_sec, -boot.tv_nsec);
- update_xtime_cache(0);
total_sleep_time.tv_sec = 0;
total_sleep_time.tv_nsec = 0;
write_sequnlock_irqrestore(&xtime_lock, flags);
@@ -593,7 +583,6 @@ static int timekeeping_resume(struct sys_device *dev)
wall_to_monotonic = timespec_sub(wall_to_monotonic, ts);
total_sleep_time = timespec_add_safe(total_sleep_time, ts);
}
- update_xtime_cache(0);
/* re-base the last cycle value */
timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
timekeeper.ntp_error = 0;
@@ -788,7 +777,6 @@ void update_wall_time(void)
{
struct clocksource *clock;
cycle_t offset;
- u64 nsecs;
int shift = 0, maxshift;
/* Make sure we're fully resumed: */
@@ -847,7 +835,9 @@ void update_wall_time(void)
timekeeper.ntp_error += neg << timekeeper.ntp_error_shift;
}
- /* store full nanoseconds into xtime after rounding it up and
+
+ /*
+ * Store full nanoseconds into xtime after rounding it up and
* add the remainder to the error difference.
*/
xtime.tv_nsec = ((s64) timekeeper.xtime_nsec >> timekeeper.shift) + 1;
@@ -855,8 +845,15 @@ void update_wall_time(void)
timekeeper.ntp_error += timekeeper.xtime_nsec <<
timekeeper.ntp_error_shift;
- nsecs = clocksource_cyc2ns(offset, timekeeper.mult, timekeeper.shift);
- update_xtime_cache(nsecs);
+ /*
+ * Finally, make sure that after the rounding
+ * xtime.tv_nsec isn't larger then NSEC_PER_SEC
+ */
+ if (unlikely(xtime.tv_nsec >= NSEC_PER_SEC)) {
+ xtime.tv_nsec -= NSEC_PER_SEC;
+ xtime.tv_sec++;
+ second_overflow();
+ }
/* check to see if there is a new clocksource to use */
update_vsyscall(&xtime, timekeeper.clock, timekeeper.mult);
@@ -896,13 +893,13 @@ EXPORT_SYMBOL_GPL(monotonic_to_bootbased);
unsigned long get_seconds(void)
{
- return xtime_cache.tv_sec;
+ return xtime.tv_sec;
}
EXPORT_SYMBOL(get_seconds);
struct timespec __current_kernel_time(void)
{
- return xtime_cache;
+ return xtime;
}
struct timespec current_kernel_time(void)
@@ -913,7 +910,7 @@ struct timespec current_kernel_time(void)
do {
seq = read_seqbegin(&xtime_lock);
- now = xtime_cache;
+ now = xtime;
} while (read_seqretry(&xtime_lock, seq));
return now;
@@ -928,7 +925,7 @@ struct timespec get_monotonic_coarse(void)
do {
seq = read_seqbegin(&xtime_lock);
- now = xtime_cache;
+ now = xtime;
mono = wall_to_monotonic;
} while (read_seqretry(&xtime_lock, seq));