summaryrefslogtreecommitdiffstats
path: root/kernel/time/timekeeping.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/time/timekeeping.c')
-rw-r--r--kernel/time/timekeeping.c119
1 files changed, 73 insertions, 46 deletions
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 2a6d3e3e2c3e..af4135f05825 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -165,13 +165,6 @@ struct timespec raw_time;
/* flag for if timekeeping is suspended */
int __read_mostly timekeeping_suspended;
-static struct timespec xtime_cache __attribute__ ((aligned (16)));
-void update_xtime_cache(u64 nsec)
-{
- xtime_cache = xtime;
- timespec_add_ns(&xtime_cache, nsec);
-}
-
/* must hold xtime_lock */
void timekeeping_leap_insert(int leapsecond)
{
@@ -332,8 +325,6 @@ int do_settimeofday(struct timespec *tv)
xtime = *tv;
- update_xtime_cache(0);
-
timekeeper.ntp_error = 0;
ntp_clear();
@@ -488,6 +479,17 @@ int timekeeping_valid_for_hres(void)
}
/**
+ * timekeeping_max_deferment - Returns max time the clocksource can be deferred
+ *
+ * Caller must observe xtime_lock via read_seqbegin/read_seqretry to
+ * ensure that the clocksource does not change!
+ */
+u64 timekeeping_max_deferment(void)
+{
+ return timekeeper.clock->max_idle_ns;
+}
+
+/**
* read_persistent_clock - Return time from the persistent clock.
*
* Weak dummy function for arches that do not yet support it.
@@ -548,7 +550,6 @@ void __init timekeeping_init(void)
}
set_normalized_timespec(&wall_to_monotonic,
-boot.tv_sec, -boot.tv_nsec);
- update_xtime_cache(0);
total_sleep_time.tv_sec = 0;
total_sleep_time.tv_nsec = 0;
write_sequnlock_irqrestore(&xtime_lock, flags);
@@ -582,7 +583,6 @@ static int timekeeping_resume(struct sys_device *dev)
wall_to_monotonic = timespec_sub(wall_to_monotonic, ts);
total_sleep_time = timespec_add_safe(total_sleep_time, ts);
}
- update_xtime_cache(0);
/* re-base the last cycle value */
timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
timekeeper.ntp_error = 0;
@@ -723,6 +723,49 @@ static void timekeeping_adjust(s64 offset)
}
/**
+ * logarithmic_accumulation - shifted accumulation of cycles
+ *
+ * This functions accumulates a shifted interval of cycles into
+ * into a shifted interval nanoseconds. Allows for O(log) accumulation
+ * loop.
+ *
+ * Returns the unconsumed cycles.
+ */
+static cycle_t logarithmic_accumulation(cycle_t offset, int shift)
+{
+ u64 nsecps = (u64)NSEC_PER_SEC << timekeeper.shift;
+
+ /* If the offset is smaller then a shifted interval, do nothing */
+ if (offset < timekeeper.cycle_interval<<shift)
+ return offset;
+
+ /* Accumulate one shifted interval */
+ offset -= timekeeper.cycle_interval << shift;
+ timekeeper.clock->cycle_last += timekeeper.cycle_interval << shift;
+
+ timekeeper.xtime_nsec += timekeeper.xtime_interval << shift;
+ while (timekeeper.xtime_nsec >= nsecps) {
+ timekeeper.xtime_nsec -= nsecps;
+ xtime.tv_sec++;
+ second_overflow();
+ }
+
+ /* Accumulate into raw time */
+ raw_time.tv_nsec += timekeeper.raw_interval << shift;;
+ while (raw_time.tv_nsec >= NSEC_PER_SEC) {
+ raw_time.tv_nsec -= NSEC_PER_SEC;
+ raw_time.tv_sec++;
+ }
+
+ /* Accumulate error between NTP and clock interval */
+ timekeeper.ntp_error += tick_length << shift;
+ timekeeper.ntp_error -= timekeeper.xtime_interval <<
+ (timekeeper.ntp_error_shift + shift);
+
+ return offset;
+}
+
+/**
* update_wall_time - Uses the current clocksource to increment the wall time
*
* Called from the timer interrupt, must hold a write on xtime_lock.
@@ -731,7 +774,7 @@ void update_wall_time(void)
{
struct clocksource *clock;
cycle_t offset;
- u64 nsecs;
+ int shift = 0, maxshift;
/* Make sure we're fully resumed: */
if (unlikely(timekeeping_suspended))
@@ -745,33 +788,22 @@ void update_wall_time(void)
#endif
timekeeper.xtime_nsec = (s64)xtime.tv_nsec << timekeeper.shift;
- /* normally this loop will run just once, however in the
- * case of lost or late ticks, it will accumulate correctly.
+ /*
+ * With NO_HZ we may have to accumulate many cycle_intervals
+ * (think "ticks") worth of time at once. To do this efficiently,
+ * we calculate the largest doubling multiple of cycle_intervals
+ * that is smaller then the offset. We then accumulate that
+ * chunk in one go, and then try to consume the next smaller
+ * doubled multiple.
*/
+ shift = ilog2(offset) - ilog2(timekeeper.cycle_interval);
+ shift = max(0, shift);
+ /* Bound shift to one less then what overflows tick_length */
+ maxshift = (8*sizeof(tick_length) - (ilog2(tick_length)+1)) - 1;
+ shift = min(shift, maxshift);
while (offset >= timekeeper.cycle_interval) {
- u64 nsecps = (u64)NSEC_PER_SEC << timekeeper.shift;
-
- /* accumulate one interval */
- offset -= timekeeper.cycle_interval;
- clock->cycle_last += timekeeper.cycle_interval;
-
- timekeeper.xtime_nsec += timekeeper.xtime_interval;
- if (timekeeper.xtime_nsec >= nsecps) {
- timekeeper.xtime_nsec -= nsecps;
- xtime.tv_sec++;
- second_overflow();
- }
-
- raw_time.tv_nsec += timekeeper.raw_interval;
- if (raw_time.tv_nsec >= NSEC_PER_SEC) {
- raw_time.tv_nsec -= NSEC_PER_SEC;
- raw_time.tv_sec++;
- }
-
- /* accumulate error between NTP and clock interval */
- timekeeper.ntp_error += tick_length;
- timekeeper.ntp_error -= timekeeper.xtime_interval <<
- timekeeper.ntp_error_shift;
+ offset = logarithmic_accumulation(offset, shift);
+ shift--;
}
/* correct the clock when NTP error is too big */
@@ -807,9 +839,6 @@ void update_wall_time(void)
timekeeper.ntp_error += timekeeper.xtime_nsec <<
timekeeper.ntp_error_shift;
- nsecs = clocksource_cyc2ns(offset, timekeeper.mult, timekeeper.shift);
- update_xtime_cache(nsecs);
-
/* check to see if there is a new clocksource to use */
update_vsyscall(&xtime, timekeeper.clock, timekeeper.mult);
}
@@ -846,13 +875,13 @@ void monotonic_to_bootbased(struct timespec *ts)
unsigned long get_seconds(void)
{
- return xtime_cache.tv_sec;
+ return xtime.tv_sec;
}
EXPORT_SYMBOL(get_seconds);
struct timespec __current_kernel_time(void)
{
- return xtime_cache;
+ return xtime;
}
struct timespec current_kernel_time(void)
@@ -862,8 +891,7 @@ struct timespec current_kernel_time(void)
do {
seq = read_seqbegin(&xtime_lock);
-
- now = xtime_cache;
+ now = xtime;
} while (read_seqretry(&xtime_lock, seq));
return now;
@@ -877,8 +905,7 @@ struct timespec get_monotonic_coarse(void)
do {
seq = read_seqbegin(&xtime_lock);
-
- now = xtime_cache;
+ now = xtime;
mono = wall_to_monotonic;
} while (read_seqretry(&xtime_lock, seq));