diff options
Diffstat (limited to 'kernel/rcutree_plugin.h')
| -rw-r--r-- | kernel/rcutree_plugin.h | 601 |
1 files changed, 218 insertions, 383 deletions
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index c1cc7e17ff9d..d084ae3f281c 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -85,11 +85,21 @@ static void __init rcu_bootup_announce_oddness(void) if (nr_cpu_ids != NR_CPUS) printk(KERN_INFO "\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids); #ifdef CONFIG_RCU_NOCB_CPU +#ifndef CONFIG_RCU_NOCB_CPU_NONE + if (!have_rcu_nocb_mask) { + alloc_bootmem_cpumask_var(&rcu_nocb_mask); + have_rcu_nocb_mask = true; + } +#ifdef CONFIG_RCU_NOCB_CPU_ZERO + pr_info("\tExperimental no-CBs CPU 0\n"); + cpumask_set_cpu(0, rcu_nocb_mask); +#endif /* #ifdef CONFIG_RCU_NOCB_CPU_ZERO */ +#ifdef CONFIG_RCU_NOCB_CPU_ALL + pr_info("\tExperimental no-CBs for all CPUs\n"); + cpumask_setall(rcu_nocb_mask); +#endif /* #ifdef CONFIG_RCU_NOCB_CPU_ALL */ +#endif /* #ifndef CONFIG_RCU_NOCB_CPU_NONE */ if (have_rcu_nocb_mask) { - if (cpumask_test_cpu(0, rcu_nocb_mask)) { - cpumask_clear_cpu(0, rcu_nocb_mask); - pr_info("\tCPU 0: illegal no-CBs CPU (cleared).\n"); - } cpulist_scnprintf(nocb_buf, sizeof(nocb_buf), rcu_nocb_mask); pr_info("\tExperimental no-CBs CPUs: %s.\n", nocb_buf); if (rcu_nocb_poll) @@ -101,7 +111,7 @@ static void __init rcu_bootup_announce_oddness(void) #ifdef CONFIG_TREE_PREEMPT_RCU struct rcu_state rcu_preempt_state = - RCU_STATE_INITIALIZER(rcu_preempt, call_rcu); + RCU_STATE_INITIALIZER(rcu_preempt, 'p', call_rcu); DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data); static struct rcu_state *rcu_state = &rcu_preempt_state; @@ -1533,14 +1543,7 @@ static void __cpuinit rcu_prepare_kthreads(int cpu) int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) { *delta_jiffies = ULONG_MAX; - return rcu_cpu_has_callbacks(cpu); -} - -/* - * Because we do not have RCU_FAST_NO_HZ, don't bother initializing for it. - */ -static void rcu_prepare_for_idle_init(int cpu) -{ + return rcu_cpu_has_callbacks(cpu, NULL); } /* @@ -1577,16 +1580,6 @@ static void rcu_idle_count_callbacks_posted(void) * * The following three proprocessor symbols control this state machine: * - * RCU_IDLE_FLUSHES gives the maximum number of times that we will attempt - * to satisfy RCU. Beyond this point, it is better to incur a periodic - * scheduling-clock interrupt than to loop through the state machine - * at full power. - * RCU_IDLE_OPT_FLUSHES gives the number of RCU_IDLE_FLUSHES that are - * optional if RCU does not need anything immediately from this - * CPU, even if this CPU still has RCU callbacks queued. The first - * times through the state machine are mandatory: we need to give - * the state machine a chance to communicate a quiescent state - * to the RCU core. * RCU_IDLE_GP_DELAY gives the number of jiffies that a CPU is permitted * to sleep in dyntick-idle mode with RCU callbacks pending. This * is sized to be roughly one RCU grace period. Those energy-efficiency @@ -1602,186 +1595,108 @@ static void rcu_idle_count_callbacks_posted(void) * adjustment, they can be converted into kernel config parameters, though * making the state machine smarter might be a better option. */ -#define RCU_IDLE_FLUSHES 5 /* Number of dyntick-idle tries. */ -#define RCU_IDLE_OPT_FLUSHES 3 /* Optional dyntick-idle tries. */ #define RCU_IDLE_GP_DELAY 4 /* Roughly one grace period. */ #define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */ -extern int tick_nohz_enabled; - -/* - * Does the specified flavor of RCU have non-lazy callbacks pending on - * the specified CPU? Both RCU flavor and CPU are specified by the - * rcu_data structure. - */ -static bool __rcu_cpu_has_nonlazy_callbacks(struct rcu_data *rdp) -{ - return rdp->qlen != rdp->qlen_lazy; -} +static int rcu_idle_gp_delay = RCU_IDLE_GP_DELAY; +module_param(rcu_idle_gp_delay, int, 0644); +static int rcu_idle_lazy_gp_delay = RCU_IDLE_LAZY_GP_DELAY; +module_param(rcu_idle_lazy_gp_delay, int, 0644); -#ifdef CONFIG_TREE_PREEMPT_RCU +extern int tick_nohz_enabled; /* - * Are there non-lazy RCU-preempt callbacks? (There cannot be if there - * is no RCU-preempt in the kernel.) + * Try to advance callbacks for all flavors of RCU on the current CPU. + * Afterwards, if there are any callbacks ready for immediate invocation, + * return true. */ -static bool rcu_preempt_cpu_has_nonlazy_callbacks(int cpu) +static bool rcu_try_advance_all_cbs(void) { - struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu); - - return __rcu_cpu_has_nonlazy_callbacks(rdp); -} - -#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */ + bool cbs_ready = false; + struct rcu_data *rdp; + struct rcu_node *rnp; + struct rcu_state *rsp; -static bool rcu_preempt_cpu_has_nonlazy_callbacks(int cpu) -{ - return 0; -} + for_each_rcu_flavor(rsp) { + rdp = this_cpu_ptr(rsp->rda); + rnp = rdp->mynode; -#endif /* else #ifdef CONFIG_TREE_PREEMPT_RCU */ + /* + * Don't bother checking unless a grace period has + * completed since we last checked and there are + * callbacks not yet ready to invoke. + */ + if (rdp->completed != rnp->completed && + rdp->nxttail[RCU_DONE_TAIL] != rdp->nxttail[RCU_NEXT_TAIL]) + rcu_process_gp_end(rsp, rdp); -/* - * Does any flavor of RCU have non-lazy callbacks on the specified CPU? - */ -static bool rcu_cpu_has_nonlazy_callbacks(int cpu) -{ - return __rcu_cpu_has_nonlazy_callbacks(&per_cpu(rcu_sched_data, cpu)) || - __rcu_cpu_has_nonlazy_callbacks(&per_cpu(rcu_bh_data, cpu)) || - rcu_preempt_cpu_has_nonlazy_callbacks(cpu); + if (cpu_has_callbacks_ready_to_invoke(rdp)) + cbs_ready = true; + } + return cbs_ready; } /* - * Allow the CPU to enter dyntick-idle mode if either: (1) There are no - * callbacks on this CPU, (2) this CPU has not yet attempted to enter - * dyntick-idle mode, or (3) this CPU is in the process of attempting to - * enter dyntick-idle mode. Otherwise, if we have recently tried and failed - * to enter dyntick-idle mode, we refuse to try to enter it. After all, - * it is better to incur scheduling-clock interrupts than to spin - * continuously for the same time duration! + * Allow the CPU to enter dyntick-idle mode unless it has callbacks ready + * to invoke. If the CPU has callbacks, try to advance them. Tell the + * caller to set the timeout based on whether or not there are non-lazy + * callbacks. * - * The delta_jiffies argument is used to store the time when RCU is - * going to need the CPU again if it still has callbacks. The reason - * for this is that rcu_prepare_for_idle() might need to post a timer, - * but if so, it will do so after tick_nohz_stop_sched_tick() has set - * the wakeup time for this CPU. This means that RCU's timer can be - * delayed until the wakeup time, which defeats the purpose of posting - * a timer. + * The caller must have disabled interrupts. */ -int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) +int rcu_needs_cpu(int cpu, unsigned long *dj) { struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); - /* Flag a new idle sojourn to the idle-entry state machine. */ - rdtp->idle_first_pass = 1; + /* Snapshot to detect later posting of non-lazy callback. */ + rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted; + /* If no callbacks, RCU doesn't need the CPU. */ - if (!rcu_cpu_has_callbacks(cpu)) { - *delta_jiffies = ULONG_MAX; + if (!rcu_cpu_has_callbacks(cpu, &rdtp->all_lazy)) { + *dj = ULONG_MAX; return 0; } - if (rdtp->dyntick_holdoff == jiffies) { - /* RCU recently tried and failed, so don't try again. */ - *delta_jiffies = 1; + + /* Attempt to advance callbacks. */ + if (rcu_try_advance_all_cbs()) { + /* Some ready to invoke, so initiate later invocation. */ + invoke_rcu_core(); return 1; } - /* Set up for the possibility that RCU will post a timer. */ - if (rcu_cpu_has_nonlazy_callbacks(cpu)) { - *delta_jiffies = round_up(RCU_IDLE_GP_DELAY + jiffies, - RCU_IDLE_GP_DELAY) - jiffies; + rdtp->last_accelerate = jiffies; + + /* Request timer delay depending on laziness, and round. */ + if (rdtp->all_lazy) { + *dj = round_up(rcu_idle_gp_delay + jiffies, + rcu_idle_gp_delay) - jiffies; } else { - *delta_jiffies = jiffies + RCU_IDLE_LAZY_GP_DELAY; - *delta_jiffies = round_jiffies(*delta_jiffies) - jiffies; + *dj = round_jiffies(rcu_idle_lazy_gp_delay + jiffies) - jiffies; } return 0; } /* - * Handler for smp_call_function_single(). The only point of this - * handler is to wake the CPU up, so the handler does only tracing. - */ -void rcu_idle_demigrate(void *unused) -{ - trace_rcu_prep_idle("Demigrate"); -} - -/* - * Timer handler used to force CPU to start pushing its remaining RCU - * callbacks in the case where it entered dyntick-idle mode with callbacks - * pending. The hander doesn't really need to do anything because the - * real work is done upon re-entry to idle, or by the next scheduling-clock - * interrupt should idle not be re-entered. - * - * One special case: the timer gets migrated without awakening the CPU - * on which the timer was scheduled on. In this case, we must wake up - * that CPU. We do so with smp_call_function_single(). - */ -static void rcu_idle_gp_timer_func(unsigned long cpu_in) -{ - int cpu = (int)cpu_in; - - trace_rcu_prep_idle("Timer"); - if (cpu != smp_processor_id()) - smp_call_function_single(cpu, rcu_idle_demigrate, NULL, 0); - else - WARN_ON_ONCE(1); /* Getting here can hang the system... */ -} - -/* - * Initialize the timer used to pull CPUs out of dyntick-idle mode. - */ -static void rcu_prepare_for_idle_init(int cpu) -{ - struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); - - rdtp->dyntick_holdoff = jiffies - 1; - setup_timer(&rdtp->idle_gp_timer, rcu_idle_gp_timer_func, cpu); - rdtp->idle_gp_timer_expires = jiffies - 1; - rdtp->idle_first_pass = 1; -} - -/* - * Clean up for exit from idle. Because we are exiting from idle, there - * is no longer any point to ->idle_gp_timer, so cancel it. This will - * do nothing if this timer is not active, so just cancel it unconditionally. - */ -static void rcu_cleanup_after_idle(int cpu) -{ - struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); - - del_timer(&rdtp->idle_gp_timer); - trace_rcu_prep_idle("Cleanup after idle"); - rdtp->tick_nohz_enabled_snap = ACCESS_ONCE(tick_nohz_enabled); -} - -/* - * Check to see if any RCU-related work can be done by the current CPU, - * and if so, schedule a softirq to get it done. This function is part - * of the RCU implementation; it is -not- an exported member of the RCU API. - * - * The idea is for the current CPU to clear out all work required by the - * RCU core for the current grace period, so that this CPU can be permitted - * to enter dyntick-idle mode. In some cases, it will need to be awakened - * at the end of the grace period by whatever CPU ends the grace period. - * This allows CPUs to go dyntick-idle more quickly, and to reduce the - * number of wakeups by a modest integer factor. - * - * Because it is not legal to invoke rcu_process_callbacks() with irqs - * disabled, we do one pass of force_quiescent_state(), then do a - * invoke_rcu_core() to cause rcu_process_callbacks() to be invoked - * later. The ->dyntick_drain field controls the sequencing. + * Prepare a CPU for idle from an RCU perspective. The first major task + * is to sense whether nohz mode has been enabled or disabled via sysfs. + * The second major task is to check to see if a non-lazy callback has + * arrived at a CPU that previously had only lazy callbacks. The third + * major task is to accelerate (that is, assign grace-period numbers to) + * any recently arrived callbacks. * * The caller must have disabled interrupts. */ static void rcu_prepare_for_idle(int cpu) { - struct timer_list *tp; + struct rcu_data *rdp; struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); + struct rcu_node *rnp; + struct rcu_state *rsp; int tne; /* Handle nohz enablement switches conservatively. */ tne = ACCESS_ONCE(tick_nohz_enabled); if (tne != rdtp->tick_nohz_enabled_snap) { - if (rcu_cpu_has_callbacks(cpu)) + if (rcu_cpu_has_callbacks(cpu, NULL)) invoke_rcu_core(); /* force nohz to see update. */ rdtp->tick_nohz_enabled_snap = tne; return; @@ -1789,125 +1704,56 @@ static void rcu_prepare_for_idle(int cpu) if (!tne) return; - /* Adaptive-tick mode, where usermode execution is idle to RCU. */ - if (!is_idle_task(current)) { - rdtp->dyntick_holdoff = jiffies - 1; - if (rcu_cpu_has_nonlazy_callbacks(cpu)) { - trace_rcu_prep_idle("User dyntick with callbacks"); - rdtp->idle_gp_timer_expires = - round_up(jiffies + RCU_IDLE_GP_DELAY, - RCU_IDLE_GP_DELAY); - } else if (rcu_cpu_has_callbacks(cpu)) { - rdtp->idle_gp_timer_expires = - round_jiffies(jiffies + RCU_IDLE_LAZY_GP_DELAY); - trace_rcu_prep_idle("User dyntick with lazy callbacks"); - } else { - return; - } - tp = &rdtp->idle_gp_timer; - mod_timer_pinned(tp, rdtp->idle_gp_timer_expires); + /* If this is a no-CBs CPU, no callbacks, just return. */ + if (is_nocb_cpu(cpu)) return; - } /* - * If this is an idle re-entry, for example, due to use of - * RCU_NONIDLE() or the new idle-loop tracing API within the idle - * loop, then don't take any state-machine actions, unless the - * momentary exit from idle queued additional non-lazy callbacks. - * Instead, repost the ->idle_gp_timer if this CPU has callbacks - * pending. + * If a non-lazy callback arrived at a CPU having only lazy + * callbacks, invoke RCU core for the side-effect of recalculating + * idle duration on re-entry to idle. */ - if (!rdtp->idle_first_pass && - (rdtp->nonlazy_posted == rdtp->nonlazy_posted_snap)) { - if (rcu_cpu_has_callbacks(cpu)) { - tp = &rdtp->idle_gp_timer; - mod_timer_pinned(tp, rdtp->idle_gp_timer_expires); - } + if (rdtp->all_lazy && + rdtp->nonlazy_posted != rdtp->nonlazy_posted_snap) { + invoke_rcu_core(); return; } - rdtp->idle_first_pass = 0; - rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted - 1; /* - * If there are no callbacks on this CPU, enter dyntick-idle mode. - * Also reset state to avoid prejudicing later attempts. + * If we have not yet accelerated this jiffy, accelerate all + * callbacks on this CPU. */ - if (!rcu_cpu_has_callbacks(cpu)) { - rdtp->dyntick_holdoff = jiffies - 1; - rdtp->dyntick_drain = 0; - trace_rcu_prep_idle("No callbacks"); + if (rdtp->last_accelerate == jiffies) return; + rdtp->last_accelerate = jiffies; + for_each_rcu_flavor(rsp) { + rdp = per_cpu_ptr(rsp->rda, cpu); + if (!*rdp->nxttail[RCU_DONE_TAIL]) + continue; + rnp = rdp->mynode; + raw_spin_lock(&rnp->lock); /* irqs already disabled. */ + rcu_accelerate_cbs(rsp, rnp, rdp); + raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */ } +} - /* - * If in holdoff mode, just return. We will presumably have - * refrained from disabling the scheduling-clock tick. - */ - if (rdtp->dyntick_holdoff == jiffies) { - trace_rcu_prep_idle("In holdoff"); - return; - } +/* + * Clean up for exit from idle. Attempt to advance callbacks based on + * any grace periods that elapsed while the CPU was idle, and if any + * callbacks are now ready to invoke, initiate invocation. + */ +static void rcu_cleanup_after_idle(int cpu) +{ + struct rcu_data *rdp; + struct rcu_state *rsp; - /* Check and update the ->dyntick_drain sequencing. */ - if (rdtp->dyntick_drain <= 0) { - /* First time through, initialize the counter. */ - rdtp->dyntick_drain = RCU_IDLE_FLUSHES; - } else if (rdtp->dyntick_drain <= RCU_IDLE_OPT_FLUSHES && - !rcu_pending(cpu) && - !local_softirq_pending()) { - /* Can we go dyntick-idle despite still having callbacks? */ - rdtp->dyntick_drain = 0; - rdtp->dyntick_holdoff = jiffies; - if (rcu_cpu_has_nonlazy_callbacks(cpu)) { - trace_rcu_prep_idle("Dyntick with callbacks"); - rdtp->idle_gp_timer_expires = - round_up(jiffies + RCU_IDLE_GP_DELAY, - RCU_IDLE_GP_DELAY); - } else { - rdtp->idle_gp_timer_expires = - round_jiffies(jiffies + RCU_IDLE_LAZY_GP_DELAY); - trace_rcu_prep_idle("Dyntick with lazy callbacks"); - } - tp = &rdtp->idle_gp_timer; - mod_timer_pinned(tp, rdtp->idle_gp_timer_expires); - rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted; - return; /* Nothing more to do immediately. */ - } else if (--(rdtp->dyntick_drain) <= 0) { - /* We have hit the limit, so time to give up. */ - rdtp->dyntick_holdoff = jiffies; - trace_rcu_prep_idle("Begin holdoff"); - invoke_rcu_core(); /* Force the CPU out of dyntick-idle. */ + if (is_nocb_cpu(cpu)) return; - } - - /* - * Do one step of pushing the remaining RCU callbacks through - * the RCU core state machine. - */ -#ifdef CONFIG_TREE_PREEMPT_RCU - if (per_cpu(rcu_preempt_data, cpu).nxtlist) { - rcu_preempt_qs(cpu); - force_quiescent_state(&rcu_preempt_state); - } -#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */ - if (per_cpu(rcu_sched_data, cpu).nxtlist) { - rcu_sched_qs(cpu); - force_quiescent_state(&rcu_sched_state); - } - if (per_cpu(rcu_bh_data, cpu).nxtlist) { - rcu_bh_qs(cpu); - force_quiescent_state(&rcu_bh_state); - } - - /* - * If RCU callbacks are still pending, RCU still needs this CPU. - * So try forcing the callbacks through the grace period. - */ - if (rcu_cpu_has_callbacks(cpu)) { - trace_rcu_prep_idle("More callbacks"); - invoke_rcu_core(); - } else { - trace_rcu_prep_idle("Callbacks drained"); + rcu_try_advance_all_cbs(); + for_each_rcu_flavor(rsp) { + rdp = per_cpu_ptr(rsp->rda, cpu); + if (cpu_has_callbacks_ready_to_invoke(rdp)) + invoke_rcu_core(); } } @@ -2015,16 +1861,13 @@ early_initcall(rcu_register_oom_notifier); static void print_cpu_stall_fast_no_hz(char *cp, int cpu) { struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); - struct timer_list *tltp = &rdtp->idle_gp_timer; - char c; + unsigned long nlpd = rdtp->nonlazy_posted - rdtp->nonlazy_posted_snap; - c = rdtp->dyntick_holdoff == jiffies ? 'H' : '.'; - if (timer_pending(tltp)) - sprintf(cp, "drain=%d %c timer=%lu", - rdtp->dyntick_drain, c, tltp->expires - jiffies); - else - sprintf(cp, "drain=%d %c timer not pending", - rdtp->dyntick_drain, c); + sprintf(cp, "last_accelerate: %04lx/%04lx, nonlazy_posted: %ld, %c%c", + rdtp->last_accelerate & 0xffff, jiffies & 0xffff, + ulong2long(nlpd), + rdtp->all_lazy ? 'L' : '.', + rdtp->tick_nohz_enabled_snap ? '.' : 'D'); } #else /* #ifdef CONFIG_RCU_FAST_NO_HZ */ @@ -2070,10 +1913,11 @@ static void print_cpu_stall_info(struct rcu_state *rsp, int cpu) ticks_value = rsp->gpnum - rdp->gpnum; } print_cpu_stall_fast_no_hz(fast_no_hz, cpu); - printk(KERN_ERR "\t%d: (%lu %s) idle=%03x/%llx/%d %s\n", + printk(KERN_ERR "\t%d: (%lu %s) idle=%03x/%llx/%d softirq=%u/%u %s\n", cpu, ticks_value, ticks_title, atomic_read(&rdtp->dynticks) & 0xfff, rdtp->dynticks_nesting, rdtp->dynticks_nmi_nesting, + rdp->softirq_snap, kstat_softirqs_cpu(RCU_SOFTIRQ, cpu), fast_no_hz); } @@ -2087,6 +1931,7 @@ static void print_cpu_stall_info_end(void) static void zero_cpu_stall_ticks(struct rcu_data *rdp) { rdp->ticks_this_gp = 0; + rdp->softirq_snap = kstat_softirqs_cpu(RCU_SOFTIRQ, smp_processor_id()); } /* Increment ->ticks_this_gp for all flavors of RCU. */ @@ -2165,6 +2010,47 @@ static int __init parse_rcu_nocb_poll(char *arg) } early_param("rcu_nocb_poll", parse_rcu_nocb_poll); +/* + * Do any no-CBs CPUs need another grace period? + * + * Interrupts must be disabled. If the caller does not hold the root + * rnp_node structure's ->lock, the results are advisory only. + */ +static int rcu_nocb_needs_gp(struct rcu_state *rsp) +{ + struct rcu_node *rnp = rcu_get_root(rsp); + + return rnp->need_future_gp[(ACCESS_ONCE(rnp->completed) + 1) & 0x1]; +} + +/* + * Wake up any no-CBs CPUs' kthreads that were waiting on the just-ended + * grace period. + */ +static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp) +{ + wake_up_all(&rnp->nocb_gp_wq[rnp->completed & 0x1]); +} + +/* + * Set the root rcu_node structure's ->need_future_gp field + * based on the sum of those of all rcu_node structures. This does + * double-count the root rcu_node structure's requests, but this + * is necessary to handle the possibility of a rcu_nocb_kthread() + * having awakened during the time that the rcu_node structures + * were being updated for the end of the previous grace period. + */ +static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq) +{ + rnp->need_future_gp[(rnp->completed + 1) & 0x1] += nrq; +} + +static void rcu_init_one_nocb(struct rcu_node *rnp) +{ + init_waitqueue_head(&rnp->nocb_gp_wq[0]); + init_waitqueue_head(&rnp->nocb_gp_wq[1]); +} + /* Is the specified CPU a no-CPUs CPU? */ static bool is_nocb_cpu(int cpu) { @@ -2227,6 +2113,13 @@ static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp, if (!is_nocb_cpu(rdp->cpu)) return 0; __call_rcu_nocb_enqueue(rdp, rhp, &rhp->next, 1, lazy); + if (__is_kfree_rcu_offset((unsigned long)rhp->func)) + trace_rcu_kfree_callback(rdp->rsp->name, rhp, + (unsigned long)rhp->func, + rdp->qlen_lazy, rdp->qlen); + else + trace_rcu_callback(rdp->rsp->name, rhp, + rdp->qlen_lazy, rdp->qlen); return 1; } @@ -2265,95 +2158,36 @@ static bool __maybe_unused rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp, } /* - * There must be at least one non-no-CBs CPU in operation at any given - * time, because no-CBs CPUs are not capable of initiating grace periods - * independently. This function therefore complains if the specified - * CPU is the last non-no-CBs CPU, allowing the CPU-hotplug system to - * avoid offlining the last such CPU. (Recursion is a wonderful thing, - * but you have to have a base case!) + * If necessary, kick off a new grace period, and either way wait + * for a subsequent grace period to complete. */ -static bool nocb_cpu_expendable(int cpu) +static void rcu_nocb_wait_gp(struct rcu_data *rdp) { - cpumask_var_t non_nocb_cpus; - int ret; + unsigned long c; + bool d; + unsigned long flags; + struct rcu_node *rnp = rdp->mynode; + + raw_spin_lock_irqsave(&rnp->lock, flags); + c = rcu_start_future_gp(rnp, rdp); + raw_spin_unlock_irqrestore(&rnp->lock, flags); /* - * If there are no no-CB CPUs or if this CPU is not a no-CB CPU, - * then offlining this CPU is harmless. Let it happen. + * Wait for the grace period. Do so interruptibly to avoid messing + * up the load average. */ - if (!have_rcu_nocb_mask || is_nocb_cpu(cpu)) - return 1; - - /* If no memory, play it safe and keep the CPU around. */ - if (!alloc_cpumask_var(&non_nocb_cpus, GFP_NOIO)) - return 0; - cpumask_andnot(non_nocb_cpus, cpu_online_mask, rcu_nocb_mask); - cpumask_clear_cpu(cpu, non_nocb_cpus); - ret = !cpumask_empty(non_nocb_cpus); - free_cpumask_var(non_nocb_cpus); - return ret; -} - -/* - * Helper structure for remote registry of RCU callbacks. - * This is needed for when a no-CBs CPU needs to start a grace period. - * If it just invokes call_rcu(), the resulting callback will be queued, - * which can result in deadlock. - */ -struct rcu_head_remote { - struct rcu_head *rhp; - call_rcu_func_t *crf; - void (*func)(struct rcu_head *rhp); -}; - -/* - * Register a callback as specified by the rcu_head_remote struct. - * This function is intended to be invoked via smp_call_function_single(). - */ -static void call_rcu_local(void *arg) -{ - struct rcu_head_remote *rhrp = - container_of(arg, struct rcu_head_remote, rhp); - - rhrp->crf(rhrp->rhp, rhrp->func); -} - -/* - * Set up an rcu_head_remote structure and the invoke call_rcu_local() - * on CPU 0 (which is guaranteed to be a non-no-CBs CPU) via - * smp_call_function_single(). - */ -static void invoke_crf_remote(struct rcu_head *rhp, - void (*func)(struct rcu_head *rhp), - call_rcu_func_t crf) -{ - struct rcu_head_remote rhr; - - rhr.rhp = rhp; - rhr.crf = crf; - rhr.func = func; - smp_call_function_single(0, call_rcu_local, &rhr, 1); -} - -/* - * Helper functions to be passed to wait_rcu_gp(), each of which - * invokes invoke_crf_remote() to register a callback appropriately. - */ -static void __maybe_unused -call_rcu_preempt_remote(struct rcu_head *rhp, - void (*func)(struct rcu_head *rhp)) -{ - invoke_crf_remote(rhp, func, call_rcu); -} -static void call_rcu_bh_remote(struct rcu_head *rhp, - void (*func)(struct rcu_head *rhp)) -{ - invoke_crf_remote(rhp, func, call_rcu_bh); -} -static void call_rcu_sched_remote(struct rcu_head *rhp, - void (*func)(struct rcu_head *rhp)) -{ - invoke_crf_remote(rhp, func, call_rcu_sched); + trace_rcu_future_gp(rnp, rdp, c, "StartWait"); + for (;;) { + wait_event_interruptible( + rnp->nocb_gp_wq[c & 0x1], + (d = ULONG_CMP_GE(ACCESS_ONCE(rnp->completed), c))); + if (likely(d)) + break; + flush_signals(current); + trace_rcu_future_gp(rnp, rdp, c, "ResumeWait"); + } + trace_rcu_future_gp(rnp, rdp, c, "EndWait"); + smp_mb(); /* Ensure that CB invocation happens after GP end. */ } /* @@ -2390,7 +2224,7 @@ static int rcu_nocb_kthread(void *arg) cl = atomic_long_xchg(&rdp->nocb_q_count_lazy, 0); ACCESS_ONCE(rdp->nocb_p_count) += c; ACCESS_ONCE(rdp->nocb_p_count_lazy) += cl; - wait_rcu_gp(rdp->rsp->call_remote); + rcu_nocb_wait_gp(rdp); /* Each pass through the following loop invokes a callback. */ trace_rcu_batch_start(rdp->rsp->name, cl, c, -1); @@ -2436,32 +2270,41 @@ static void __init rcu_spawn_nocb_kthreads(struct rcu_state *rsp) return; for_each_cpu(cpu, rcu_nocb_mask) { rdp = per_cpu_ptr(rsp->rda, cpu); - t = kthread_run(rcu_nocb_kthread, rdp, "rcuo%d", cpu); + t = kthread_run(rcu_nocb_kthread, rdp, + "rcuo%c/%d", rsp->abbr, cpu); BUG_ON(IS_ERR(t)); ACCESS_ONCE(rdp->nocb_kthread) = t; } } /* Prevent __call_rcu() from enqueuing callbacks on no-CBs CPUs */ -static void init_nocb_callback_list(struct rcu_data *rdp) +static bool init_nocb_callback_list(struct rcu_data *rdp) { if (rcu_nocb_mask == NULL || !cpumask_test_cpu(rdp->cpu, rcu_nocb_mask)) - return; + return false; rdp->nxttail[RCU_NEXT_TAIL] = NULL; + return true; +} + +#else /* #ifdef CONFIG_RCU_NOCB_CPU */ + +static int rcu_nocb_needs_gp(struct rcu_state *rsp) +{ + return 0; } -/* Initialize the ->call_remote fields in the rcu_state structures. */ -static void __init rcu_init_nocb(void) +static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp) { -#ifdef CONFIG_PREEMPT_RCU - rcu_preempt_state.call_remote = call_rcu_preempt_remote; -#endif /* #ifdef CONFIG_PREEMPT_RCU */ - rcu_bh_state.call_remote = call_rcu_bh_remote; - rcu_sched_state.call_remote = call_rcu_sched_remote; } -#else /* #ifdef CONFIG_RCU_NOCB_CPU */ +static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq) +{ +} + +static void rcu_init_one_nocb(struct rcu_node *rnp) +{ +} static bool is_nocb_cpu(int cpu) { @@ -2480,11 +2323,6 @@ static bool __maybe_unused rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp, return 0; } -static bool nocb_cpu_expendable(int cpu) -{ - return 1; -} - static void __init rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp) { } @@ -2493,12 +2331,9 @@ static void __init rcu_spawn_nocb_kthreads(struct rcu_state *rsp) { } -static void init_nocb_callback_list(struct rcu_data *rdp) -{ -} - -static void __init rcu_init_nocb(void) +static bool init_nocb_callback_list(struct rcu_data *rdp) { + return false; } #endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */ |