diff options
Diffstat (limited to 'kernel/power')
| -rw-r--r-- | kernel/power/Kconfig | 237 | ||||
| -rw-r--r-- | kernel/power/hibernate.c | 9 | ||||
| -rw-r--r-- | kernel/power/main.c | 3 | ||||
| -rw-r--r-- | kernel/power/snapshot.c | 8 | ||||
| -rw-r--r-- | kernel/power/suspend.c | 4 |
5 files changed, 119 insertions, 142 deletions
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 265729966ece..4603f08dc47b 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -1,125 +1,12 @@ -config PM - bool "Power Management support" - depends on !IA64_HP_SIM - ---help--- - "Power Management" means that parts of your computer are shut - off or put into a power conserving "sleep" mode if they are not - being used. There are two competing standards for doing this: APM - and ACPI. If you want to use either one, say Y here and then also - to the requisite support below. - - Power Management is most important for battery powered laptop - computers; if you have a laptop, check out the Linux Laptop home - page on the WWW at <http://www.linux-on-laptops.com/> or - Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/> - and the Battery Powered Linux mini-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - Note that, even if you say N here, Linux on the x86 architecture - will issue the hlt instruction if nothing is to be done, thereby - sending the processor to sleep and saving power. - -config PM_DEBUG - bool "Power Management Debug Support" - depends on PM - ---help--- - This option enables various debugging support in the Power Management - code. This is helpful when debugging and reporting PM bugs, like - suspend support. - -config PM_ADVANCED_DEBUG - bool "Extra PM attributes in sysfs for low-level debugging/testing" - depends on PM_DEBUG - default n - ---help--- - Add extra sysfs attributes allowing one to access some Power Management - fields of device objects from user space. If you are not a kernel - developer interested in debugging/testing Power Management, say "no". - -config PM_VERBOSE - bool "Verbose Power Management debugging" - depends on PM_DEBUG - default n - ---help--- - This option enables verbose messages from the Power Management code. - -config CAN_PM_TRACE - def_bool y - depends on PM_DEBUG && PM_SLEEP && EXPERIMENTAL - -config PM_TRACE - bool - help - This enables code to save the last PM event point across - reboot. The architecture needs to support this, x86 for - example does by saving things in the RTC, see below. - - The architecture specific code must provide the extern - functions from <linux/resume-trace.h> as well as the - <asm/resume-trace.h> header with a TRACE_RESUME() macro. - - The way the information is presented is architecture- - dependent, x86 will print the information during a - late_initcall. - -config PM_TRACE_RTC - bool "Suspend/resume event tracing" - depends on CAN_PM_TRACE - depends on X86 - select PM_TRACE - default n - ---help--- - This enables some cheesy code to save the last PM event point in the - RTC across reboots, so that you can debug a machine that just hangs - during suspend (or more commonly, during resume). - - To use this debugging feature you should attempt to suspend the - machine, reboot it and then run - - dmesg -s 1000000 | grep 'hash matches' - - CAUTION: this option will cause your machine's real-time clock to be - set to an invalid time after a resume. - -config PM_SLEEP_SMP - bool - depends on SMP - depends on ARCH_SUSPEND_POSSIBLE || ARCH_HIBERNATION_POSSIBLE - depends on PM_SLEEP - select HOTPLUG - select HOTPLUG_CPU - default y - -config PM_SLEEP - bool - depends on SUSPEND || HIBERNATION || XEN_SAVE_RESTORE - default y - -config PM_SLEEP_ADVANCED_DEBUG - bool - depends on PM_ADVANCED_DEBUG - default n - config SUSPEND bool "Suspend to RAM and standby" - depends on PM && ARCH_SUSPEND_POSSIBLE + depends on ARCH_SUSPEND_POSSIBLE default y ---help--- Allow the system to enter sleep states in which main memory is powered and thus its contents are preserved, such as the suspend-to-RAM state (e.g. the ACPI S3 state). -config PM_TEST_SUSPEND - bool "Test suspend/resume and wakealarm during bootup" - depends on SUSPEND && PM_DEBUG && RTC_CLASS=y - ---help--- - This option will let you suspend your machine during bootup, and - make it wake up a few seconds later using an RTC wakeup alarm. - Enable this with a kernel parameter like "test_suspend=mem". - - You probably want to have your system's RTC driver statically - linked, ensuring that it's available when this test runs. - config SUSPEND_FREEZER bool "Enable freezer for suspend to RAM/standby" \ if ARCH_WANTS_FREEZER_CONTROL || BROKEN @@ -133,7 +20,7 @@ config SUSPEND_FREEZER config HIBERNATION bool "Hibernation (aka 'suspend to disk')" - depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE + depends on SWAP && ARCH_HIBERNATION_POSSIBLE select LZO_COMPRESS select LZO_DECOMPRESS ---help--- @@ -196,6 +83,106 @@ config PM_STD_PARTITION suspended image to. It will simply pick the first available swap device. +config PM_SLEEP + def_bool y + depends on SUSPEND || HIBERNATION || XEN_SAVE_RESTORE + +config PM_SLEEP_SMP + def_bool y + depends on SMP + depends on ARCH_SUSPEND_POSSIBLE || ARCH_HIBERNATION_POSSIBLE + depends on PM_SLEEP + select HOTPLUG + select HOTPLUG_CPU + +config PM_RUNTIME + bool "Run-time PM core functionality" + depends on !IA64_HP_SIM + ---help--- + Enable functionality allowing I/O devices to be put into energy-saving + (low power) states at run time (or autosuspended) after a specified + period of inactivity and woken up in response to a hardware-generated + wake-up event or a driver's request. + + Hardware support is generally required for this functionality to work + and the bus type drivers of the buses the devices are on are + responsible for the actual handling of the autosuspend requests and + wake-up events. + +config PM + def_bool y + depends on PM_SLEEP || PM_RUNTIME + +config PM_DEBUG + bool "Power Management Debug Support" + depends on PM + ---help--- + This option enables various debugging support in the Power Management + code. This is helpful when debugging and reporting PM bugs, like + suspend support. + +config PM_VERBOSE + bool "Verbose Power Management debugging" + depends on PM_DEBUG + ---help--- + This option enables verbose messages from the Power Management code. + +config PM_ADVANCED_DEBUG + bool "Extra PM attributes in sysfs for low-level debugging/testing" + depends on PM_DEBUG + ---help--- + Add extra sysfs attributes allowing one to access some Power Management + fields of device objects from user space. If you are not a kernel + developer interested in debugging/testing Power Management, say "no". + +config PM_TEST_SUSPEND + bool "Test suspend/resume and wakealarm during bootup" + depends on SUSPEND && PM_DEBUG && RTC_CLASS=y + ---help--- + This option will let you suspend your machine during bootup, and + make it wake up a few seconds later using an RTC wakeup alarm. + Enable this with a kernel parameter like "test_suspend=mem". + + You probably want to have your system's RTC driver statically + linked, ensuring that it's available when this test runs. + +config CAN_PM_TRACE + def_bool y + depends on PM_DEBUG && PM_SLEEP + +config PM_TRACE + bool + help + This enables code to save the last PM event point across + reboot. The architecture needs to support this, x86 for + example does by saving things in the RTC, see below. + + The architecture specific code must provide the extern + functions from <linux/resume-trace.h> as well as the + <asm/resume-trace.h> header with a TRACE_RESUME() macro. + + The way the information is presented is architecture- + dependent, x86 will print the information during a + late_initcall. + +config PM_TRACE_RTC + bool "Suspend/resume event tracing" + depends on CAN_PM_TRACE + depends on X86 + select PM_TRACE + ---help--- + This enables some cheesy code to save the last PM event point in the + RTC across reboots, so that you can debug a machine that just hangs + during suspend (or more commonly, during resume). + + To use this debugging feature you should attempt to suspend the + machine, reboot it and then run + + dmesg -s 1000000 | grep 'hash matches' + + CAUTION: this option will cause your machine's real-time clock to be + set to an invalid time after a resume. + config APM_EMULATION tristate "Advanced Power Management Emulation" depends on PM && SYS_SUPPORTS_APM_EMULATION @@ -222,31 +209,11 @@ config APM_EMULATION anything, try disabling/enabling this option (or disabling/enabling APM in your BIOS). -config PM_RUNTIME - bool "Run-time PM core functionality" - depends on PM - ---help--- - Enable functionality allowing I/O devices to be put into energy-saving - (low power) states at run time (or autosuspended) after a specified - period of inactivity and woken up in response to a hardware-generated - wake-up event or a driver's request. - - Hardware support is generally required for this functionality to work - and the bus type drivers of the buses the devices are on are - responsible for the actual handling of the autosuspend requests and - wake-up events. - -config PM_OPS - bool - depends on PM_SLEEP || PM_RUNTIME - default y - config ARCH_HAS_OPP bool config PM_OPP bool "Operating Performance Point (OPP) Layer library" - depends on PM depends on ARCH_HAS_OPP ---help--- SOCs have a standard set of tuples consisting of frequency and diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 1832bd264219..aeabd26e3342 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -23,6 +23,7 @@ #include <linux/cpu.h> #include <linux/freezer.h> #include <linux/gfp.h> +#include <linux/syscore_ops.h> #include <scsi/scsi_scan.h> #include <asm/suspend.h> @@ -272,6 +273,8 @@ static int create_image(int platform_mode) local_irq_disable(); error = sysdev_suspend(PMSG_FREEZE); + if (!error) + error = syscore_suspend(); if (error) { printk(KERN_ERR "PM: Some system devices failed to power down, " "aborting hibernation\n"); @@ -295,6 +298,7 @@ static int create_image(int platform_mode) } Power_up: + syscore_resume(); sysdev_resume(); /* NOTE: dpm_resume_noirq() is just a resume() for devices * that suspended with irqs off ... no overall powerup. @@ -403,6 +407,8 @@ static int resume_target_kernel(bool platform_mode) local_irq_disable(); error = sysdev_suspend(PMSG_QUIESCE); + if (!error) + error = syscore_suspend(); if (error) goto Enable_irqs; @@ -429,6 +435,7 @@ static int resume_target_kernel(bool platform_mode) restore_processor_state(); touch_softlockup_watchdog(); + syscore_resume(); sysdev_resume(); Enable_irqs: @@ -516,6 +523,7 @@ int hibernation_platform_enter(void) local_irq_disable(); sysdev_suspend(PMSG_HIBERNATE); + syscore_suspend(); if (pm_wakeup_pending()) { error = -EAGAIN; goto Power_up; @@ -526,6 +534,7 @@ int hibernation_platform_enter(void) while (1); Power_up: + syscore_resume(); sysdev_resume(); local_irq_enable(); enable_nonboot_cpus(); diff --git a/kernel/power/main.c b/kernel/power/main.c index 701853042c28..8eaba5f27b10 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -17,9 +17,6 @@ DEFINE_MUTEX(pm_mutex); -unsigned int pm_flags; -EXPORT_SYMBOL(pm_flags); - #ifdef CONFIG_PM_SLEEP /* Routines for PM-transition notifications */ diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index 64db648ff911..ca0aacc24874 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -42,15 +42,15 @@ static void swsusp_unset_page_forbidden(struct page *); /* * Preferred image size in bytes (tunable via /sys/power/image_size). - * When it is set to N, swsusp will do its best to ensure the image - * size will not exceed N bytes, but if that is impossible, it will - * try to create the smallest image possible. + * When it is set to N, the image creating code will do its best to + * ensure the image size will not exceed N bytes, but if that is + * impossible, it will try to create the smallest image possible. */ unsigned long image_size; void __init hibernate_image_size_init(void) { - image_size = ((totalram_pages * 2) / 5) * PAGE_SIZE; + image_size = (totalram_pages / 3) * PAGE_SIZE; } /* List of PBEs needed for restoring the pages that were allocated before diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index de6f86bfa303..2814c32aed51 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -22,6 +22,7 @@ #include <linux/mm.h> #include <linux/slab.h> #include <linux/suspend.h> +#include <linux/syscore_ops.h> #include <trace/events/power.h> #include "power.h" @@ -163,11 +164,14 @@ static int suspend_enter(suspend_state_t state) BUG_ON(!irqs_disabled()); error = sysdev_suspend(PMSG_SUSPEND); + if (!error) + error = syscore_suspend(); if (!error) { if (!(suspend_test(TEST_CORE) || pm_wakeup_pending())) { error = suspend_ops->enter(state); events_check_enabled = false; } + syscore_resume(); sysdev_resume(); } |