diff options
Diffstat (limited to 'kernel/futex/core.c')
-rw-r--r-- | kernel/futex/core.c | 966 |
1 files changed, 6 insertions, 960 deletions
diff --git a/kernel/futex/core.c b/kernel/futex/core.c index bcc4aa052f9d..42f2735e9abf 100644 --- a/kernel/futex/core.c +++ b/kernel/futex/core.c @@ -148,64 +148,6 @@ int __read_mostly futex_cmpxchg_enabled; /* - * On PREEMPT_RT, the hash bucket lock is a 'sleeping' spinlock with an - * underlying rtmutex. The task which is about to be requeued could have - * just woken up (timeout, signal). After the wake up the task has to - * acquire hash bucket lock, which is held by the requeue code. As a task - * can only be blocked on _ONE_ rtmutex at a time, the proxy lock blocking - * and the hash bucket lock blocking would collide and corrupt state. - * - * On !PREEMPT_RT this is not a problem and everything could be serialized - * on hash bucket lock, but aside of having the benefit of common code, - * this allows to avoid doing the requeue when the task is already on the - * way out and taking the hash bucket lock of the original uaddr1 when the - * requeue has been completed. - * - * The following state transitions are valid: - * - * On the waiter side: - * Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_IGNORE - * Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_WAIT - * - * On the requeue side: - * Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_INPROGRESS - * Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_DONE/LOCKED - * Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_NONE (requeue failed) - * Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_DONE/LOCKED - * Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_IGNORE (requeue failed) - * - * The requeue side ignores a waiter with state Q_REQUEUE_PI_IGNORE as this - * signals that the waiter is already on the way out. It also means that - * the waiter is still on the 'wait' futex, i.e. uaddr1. - * - * The waiter side signals early wakeup to the requeue side either through - * setting state to Q_REQUEUE_PI_IGNORE or to Q_REQUEUE_PI_WAIT depending - * on the current state. In case of Q_REQUEUE_PI_IGNORE it can immediately - * proceed to take the hash bucket lock of uaddr1. If it set state to WAIT, - * which means the wakeup is interleaving with a requeue in progress it has - * to wait for the requeue side to change the state. Either to DONE/LOCKED - * or to IGNORE. DONE/LOCKED means the waiter q is now on the uaddr2 futex - * and either blocked (DONE) or has acquired it (LOCKED). IGNORE is set by - * the requeue side when the requeue attempt failed via deadlock detection - * and therefore the waiter q is still on the uaddr1 futex. - */ -enum { - Q_REQUEUE_PI_NONE = 0, - Q_REQUEUE_PI_IGNORE, - Q_REQUEUE_PI_IN_PROGRESS, - Q_REQUEUE_PI_WAIT, - Q_REQUEUE_PI_DONE, - Q_REQUEUE_PI_LOCKED, -}; - -const struct futex_q futex_q_init = { - /* list gets initialized in futex_queue()*/ - .key = FUTEX_KEY_INIT, - .bitset = FUTEX_BITSET_MATCH_ANY, - .requeue_state = ATOMIC_INIT(Q_REQUEUE_PI_NONE), -}; - -/* * The base of the bucket array and its size are always used together * (after initialization only in futex_hash()), so ensure that they * reside in the same cacheline. @@ -269,31 +211,6 @@ late_initcall(fail_futex_debugfs); #endif /* CONFIG_FAIL_FUTEX */ -/* - * Reflects a new waiter being added to the waitqueue. - */ -static inline void futex_hb_waiters_inc(struct futex_hash_bucket *hb) -{ -#ifdef CONFIG_SMP - atomic_inc(&hb->waiters); - /* - * Full barrier (A), see the ordering comment above. - */ - smp_mb__after_atomic(); -#endif -} - -/* - * Reflects a waiter being removed from the waitqueue by wakeup - * paths. - */ -static inline void futex_hb_waiters_dec(struct futex_hash_bucket *hb) -{ -#ifdef CONFIG_SMP - atomic_dec(&hb->waiters); -#endif -} - static inline int futex_hb_waiters_pending(struct futex_hash_bucket *hb) { #ifdef CONFIG_SMP @@ -324,21 +241,6 @@ struct futex_hash_bucket *futex_hash(union futex_key *key) /** - * futex_match - Check whether two futex keys are equal - * @key1: Pointer to key1 - * @key2: Pointer to key2 - * - * Return 1 if two futex_keys are equal, 0 otherwise. - */ -static inline int futex_match(union futex_key *key1, union futex_key *key2) -{ - return (key1 && key2 - && key1->both.word == key2->both.word - && key1->both.ptr == key2->both.ptr - && key1->both.offset == key2->both.offset); -} - -/** * futex_setup_timer - set up the sleeping hrtimer. * @time: ptr to the given timeout value * @timeout: the hrtimer_sleeper structure to be set up @@ -713,7 +615,7 @@ void wait_for_owner_exiting(int ret, struct task_struct *exiting) * * The q->lock_ptr must not be NULL and must be held by the caller. */ -static void __futex_unqueue(struct futex_q *q) +void __futex_unqueue(struct futex_q *q) { struct futex_hash_bucket *hb; @@ -732,7 +634,7 @@ static void __futex_unqueue(struct futex_q *q) * must ensure to later call wake_up_q() for the actual * wakeups to occur. */ -static void futex_wake_mark(struct wake_q_head *wake_q, struct futex_q *q) +void futex_wake_mark(struct wake_q_head *wake_q, struct futex_q *q) { struct task_struct *p = q->task; @@ -758,30 +660,6 @@ static void futex_wake_mark(struct wake_q_head *wake_q, struct futex_q *q) } /* - * Express the locking dependencies for lockdep: - */ -static inline void -double_lock_hb(struct futex_hash_bucket *hb1, struct futex_hash_bucket *hb2) -{ - if (hb1 <= hb2) { - spin_lock(&hb1->lock); - if (hb1 < hb2) - spin_lock_nested(&hb2->lock, SINGLE_DEPTH_NESTING); - } else { /* hb1 > hb2 */ - spin_lock(&hb2->lock); - spin_lock_nested(&hb1->lock, SINGLE_DEPTH_NESTING); - } -} - -static inline void -double_unlock_hb(struct futex_hash_bucket *hb1, struct futex_hash_bucket *hb2) -{ - spin_unlock(&hb1->lock); - if (hb1 != hb2) - spin_unlock(&hb2->lock); -} - -/* * Wake up waiters matching bitset queued on this futex (uaddr). */ int futex_wake(u32 __user *uaddr, unsigned int flags, int nr_wake, u32 bitset) @@ -961,619 +839,6 @@ out_unlock: return ret; } -/** - * requeue_futex() - Requeue a futex_q from one hb to another - * @q: the futex_q to requeue - * @hb1: the source hash_bucket - * @hb2: the target hash_bucket - * @key2: the new key for the requeued futex_q - */ -static inline -void requeue_futex(struct futex_q *q, struct futex_hash_bucket *hb1, - struct futex_hash_bucket *hb2, union futex_key *key2) -{ - - /* - * If key1 and key2 hash to the same bucket, no need to - * requeue. - */ - if (likely(&hb1->chain != &hb2->chain)) { - plist_del(&q->list, &hb1->chain); - futex_hb_waiters_dec(hb1); - futex_hb_waiters_inc(hb2); - plist_add(&q->list, &hb2->chain); - q->lock_ptr = &hb2->lock; - } - q->key = *key2; -} - -static inline bool futex_requeue_pi_prepare(struct futex_q *q, - struct futex_pi_state *pi_state) -{ - int old, new; - - /* - * Set state to Q_REQUEUE_PI_IN_PROGRESS unless an early wakeup has - * already set Q_REQUEUE_PI_IGNORE to signal that requeue should - * ignore the waiter. - */ - old = atomic_read_acquire(&q->requeue_state); - do { - if (old == Q_REQUEUE_PI_IGNORE) - return false; - - /* - * futex_proxy_trylock_atomic() might have set it to - * IN_PROGRESS and a interleaved early wake to WAIT. - * - * It was considered to have an extra state for that - * trylock, but that would just add more conditionals - * all over the place for a dubious value. - */ - if (old != Q_REQUEUE_PI_NONE) - break; - - new = Q_REQUEUE_PI_IN_PROGRESS; - } while (!atomic_try_cmpxchg(&q->requeue_state, &old, new)); - - q->pi_state = pi_state; - return true; -} - -static inline void futex_requeue_pi_complete(struct futex_q *q, int locked) -{ - int old, new; - - old = atomic_read_acquire(&q->requeue_state); - do { - if (old == Q_REQUEUE_PI_IGNORE) - return; - - if (locked >= 0) { - /* Requeue succeeded. Set DONE or LOCKED */ - WARN_ON_ONCE(old != Q_REQUEUE_PI_IN_PROGRESS && - old != Q_REQUEUE_PI_WAIT); - new = Q_REQUEUE_PI_DONE + locked; - } else if (old == Q_REQUEUE_PI_IN_PROGRESS) { - /* Deadlock, no early wakeup interleave */ - new = Q_REQUEUE_PI_NONE; - } else { - /* Deadlock, early wakeup interleave. */ - WARN_ON_ONCE(old != Q_REQUEUE_PI_WAIT); - new = Q_REQUEUE_PI_IGNORE; - } - } while (!atomic_try_cmpxchg(&q->requeue_state, &old, new)); - -#ifdef CONFIG_PREEMPT_RT - /* If the waiter interleaved with the requeue let it know */ - if (unlikely(old == Q_REQUEUE_PI_WAIT)) - rcuwait_wake_up(&q->requeue_wait); -#endif -} - -static inline int futex_requeue_pi_wakeup_sync(struct futex_q *q) -{ - int old, new; - - old = atomic_read_acquire(&q->requeue_state); - do { - /* Is requeue done already? */ - if (old >= Q_REQUEUE_PI_DONE) - return old; - - /* - * If not done, then tell the requeue code to either ignore - * the waiter or to wake it up once the requeue is done. - */ - new = Q_REQUEUE_PI_WAIT; - if (old == Q_REQUEUE_PI_NONE) - new = Q_REQUEUE_PI_IGNORE; - } while (!atomic_try_cmpxchg(&q->requeue_state, &old, new)); - - /* If the requeue was in progress, wait for it to complete */ - if (old == Q_REQUEUE_PI_IN_PROGRESS) { -#ifdef CONFIG_PREEMPT_RT - rcuwait_wait_event(&q->requeue_wait, - atomic_read(&q->requeue_state) != Q_REQUEUE_PI_WAIT, - TASK_UNINTERRUPTIBLE); -#else - (void)atomic_cond_read_relaxed(&q->requeue_state, VAL != Q_REQUEUE_PI_WAIT); -#endif - } - - /* - * Requeue is now either prohibited or complete. Reread state - * because during the wait above it might have changed. Nothing - * will modify q->requeue_state after this point. - */ - return atomic_read(&q->requeue_state); -} - -/** - * requeue_pi_wake_futex() - Wake a task that acquired the lock during requeue - * @q: the futex_q - * @key: the key of the requeue target futex - * @hb: the hash_bucket of the requeue target futex - * - * During futex_requeue, with requeue_pi=1, it is possible to acquire the - * target futex if it is uncontended or via a lock steal. - * - * 1) Set @q::key to the requeue target futex key so the waiter can detect - * the wakeup on the right futex. - * - * 2) Dequeue @q from the hash bucket. - * - * 3) Set @q::rt_waiter to NULL so the woken up task can detect atomic lock - * acquisition. - * - * 4) Set the q->lock_ptr to the requeue target hb->lock for the case that - * the waiter has to fixup the pi state. - * - * 5) Complete the requeue state so the waiter can make progress. After - * this point the waiter task can return from the syscall immediately in - * case that the pi state does not have to be fixed up. - * - * 6) Wake the waiter task. - * - * Must be called with both q->lock_ptr and hb->lock held. - */ -static inline -void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key, - struct futex_hash_bucket *hb) -{ - q->key = *key; - - __futex_unqueue(q); - - WARN_ON(!q->rt_waiter); - q->rt_waiter = NULL; - - q->lock_ptr = &hb->lock; - - /* Signal locked state to the waiter */ - futex_requeue_pi_complete(q, 1); - wake_up_state(q->task, TASK_NORMAL); -} - -/** - * futex_proxy_trylock_atomic() - Attempt an atomic lock for the top waiter - * @pifutex: the user address of the to futex - * @hb1: the from futex hash bucket, must be locked by the caller - * @hb2: the to futex hash bucket, must be locked by the caller - * @key1: the from futex key - * @key2: the to futex key - * @ps: address to store the pi_state pointer - * @exiting: Pointer to store the task pointer of the owner task - * which is in the middle of exiting - * @set_waiters: force setting the FUTEX_WAITERS bit (1) or not (0) - * - * Try and get the lock on behalf of the top waiter if we can do it atomically. - * Wake the top waiter if we succeed. If the caller specified set_waiters, - * then direct futex_lock_pi_atomic() to force setting the FUTEX_WAITERS bit. - * hb1 and hb2 must be held by the caller. - * - * @exiting is only set when the return value is -EBUSY. If so, this holds - * a refcount on the exiting task on return and the caller needs to drop it - * after waiting for the exit to complete. - * - * Return: - * - 0 - failed to acquire the lock atomically; - * - >0 - acquired the lock, return value is vpid of the top_waiter - * - <0 - error - */ -static int -futex_proxy_trylock_atomic(u32 __user *pifutex, struct futex_hash_bucket *hb1, - struct futex_hash_bucket *hb2, union futex_key *key1, - union futex_key *key2, struct futex_pi_state **ps, - struct task_struct **exiting, int set_waiters) -{ - struct futex_q *top_waiter = NULL; - u32 curval; - int ret; - - if (futex_get_value_locked(&curval, pifutex)) - return -EFAULT; - - if (unlikely(should_fail_futex(true))) - return -EFAULT; - - /* - * Find the top_waiter and determine if there are additional waiters. - * If the caller intends to requeue more than 1 waiter to pifutex, - * force futex_lock_pi_atomic() to set the FUTEX_WAITERS bit now, - * as we have means to handle the possible fault. If not, don't set - * the bit unnecessarily as it will force the subsequent unlock to enter - * the kernel. - */ - top_waiter = futex_top_waiter(hb1, key1); - - /* There are no waiters, nothing for us to do. */ - if (!top_waiter) - return 0; - - /* - * Ensure that this is a waiter sitting in futex_wait_requeue_pi() - * and waiting on the 'waitqueue' futex which is always !PI. - */ - if (!top_waiter->rt_waiter || top_waiter->pi_state) - return -EINVAL; - - /* Ensure we requeue to the expected futex. */ - if (!futex_match(top_waiter->requeue_pi_key, key2)) - return -EINVAL; - - /* Ensure that this does not race against an early wakeup */ - if (!futex_requeue_pi_prepare(top_waiter, NULL)) - return -EAGAIN; - - /* - * Try to take the lock for top_waiter and set the FUTEX_WAITERS bit - * in the contended case or if @set_waiters is true. - * - * In the contended case PI state is attached to the lock owner. If - * the user space lock can be acquired then PI state is attached to - * the new owner (@top_waiter->task) when @set_waiters is true. - */ - ret = futex_lock_pi_atomic(pifutex, hb2, key2, ps, top_waiter->task, - exiting, set_waiters); - if (ret == 1) { - /* - * Lock was acquired in user space and PI state was - * attached to @top_waiter->task. That means state is fully - * consistent and the waiter can return to user space - * immediately after the wakeup. - */ - requeue_pi_wake_futex(top_waiter, key2, hb2); - } else if (ret < 0) { - /* Rewind top_waiter::requeue_state */ - futex_requeue_pi_complete(top_waiter, ret); - } else { - /* - * futex_lock_pi_atomic() did not acquire the user space - * futex, but managed to establish the proxy lock and pi - * state. top_waiter::requeue_state cannot be fixed up here - * because the waiter is not enqueued on the rtmutex - * yet. This is handled at the callsite depending on the - * result of rt_mutex_start_proxy_lock() which is - * guaranteed to be reached with this function returning 0. - */ - } - return ret; -} - -/** - * futex_requeue() - Requeue waiters from uaddr1 to uaddr2 - * @uaddr1: source futex user address - * @flags: futex flags (FLAGS_SHARED, etc.) - * @uaddr2: target futex user address - * @nr_wake: number of waiters to wake (must be 1 for requeue_pi) - * @nr_requeue: number of waiters to requeue (0-INT_MAX) - * @cmpval: @uaddr1 expected value (or %NULL) - * @requeue_pi: if we are attempting to requeue from a non-pi futex to a - * pi futex (pi to pi requeue is not supported) - * - * Requeue waiters on uaddr1 to uaddr2. In the requeue_pi case, try to acquire - * uaddr2 atomically on behalf of the top waiter. - * - * Return: - * - >=0 - on success, the number of tasks requeued or woken; - * - <0 - on error - */ -int futex_requeue(u32 __user *uaddr1, unsigned int flags, u32 __user *uaddr2, - int nr_wake, int nr_requeue, u32 *cmpval, int requeue_pi) -{ - union futex_key key1 = FUTEX_KEY_INIT, key2 = FUTEX_KEY_INIT; - int task_count = 0, ret; - struct futex_pi_state *pi_state = NULL; - struct futex_hash_bucket *hb1, *hb2; - struct futex_q *this, *next; - DEFINE_WAKE_Q(wake_q); - - if (nr_wake < 0 || nr_requeue < 0) - return -EINVAL; - - /* - * When PI not supported: return -ENOSYS if requeue_pi is true, - * consequently the compiler knows requeue_pi is always false past - * this point which will optimize away all the conditional code - * further down. - */ - if (!IS_ENABLED(CONFIG_FUTEX_PI) && requeue_pi) - return -ENOSYS; - - if (requeue_pi) { - /* - * Requeue PI only works on two distinct uaddrs. This - * check is only valid for private futexes. See below. - */ - if (uaddr1 == uaddr2) - return -EINVAL; - - /* - * futex_requeue() allows the caller to define the number - * of waiters to wake up via the @nr_wake argument. With - * REQUEUE_PI, waking up more than one waiter is creating - * more problems than it solves. Waking up a waiter makes - * only sense if the PI futex @uaddr2 is uncontended as - * this allows the requeue code to acquire the futex - * @uaddr2 before waking the waiter. The waiter can then - * return to user space without further action. A secondary - * wakeup would just make the futex_wait_requeue_pi() - * handling more complex, because that code would have to - * look up pi_state and do more or less all the handling - * which the requeue code has to do for the to be requeued - * waiters. So restrict the number of waiters to wake to - * one, and only wake it up when the PI futex is - * uncontended. Otherwise requeue it and let the unlock of - * the PI futex handle the wakeup. - * - * All REQUEUE_PI users, e.g. pthread_cond_signal() and - * pthread_cond_broadcast() must use nr_wake=1. - */ - if (nr_wake != 1) - return -EINVAL; - - /* - * requeue_pi requires a pi_state, try to allocate it now - * without any locks in case it fails. - */ - if (refill_pi_state_cache()) - return -ENOMEM; - } - -retry: - ret = get_futex_key(uaddr1, flags & FLAGS_SHARED, &key1, FUTEX_READ); - if (unlikely(ret != 0)) - return ret; - ret = get_futex_key(uaddr2, flags & FLAGS_SHARED, &key2, - requeue_pi ? FUTEX_WRITE : FUTEX_READ); - if (unlikely(ret != 0)) - return ret; - - /* - * The check above which compares uaddrs is not sufficient for - * shared futexes. We need to compare the keys: - */ - if (requeue_pi && futex_match(&key1, &key2)) - return -EINVAL; - - hb1 = futex_hash(&key1); - hb2 = futex_hash(&key2); - -retry_private: - futex_hb_waiters_inc(hb2); - double_lock_hb(hb1, hb2); - - if (likely(cmpval != NULL)) { - u32 curval; - - ret = futex_get_value_locked(&curval, uaddr1); - - if (unlikely(ret)) { - double_unlock_hb(hb1, hb2); - futex_hb_waiters_dec(hb2); - - ret = get_user(curval, uaddr1); - if (ret) - return ret; - - if (!(flags & FLAGS_SHARED)) - goto retry_private; - - goto retry; - } - if (curval != *cmpval) { - ret = -EAGAIN; - goto out_unlock; - } - } - - if (requeue_pi) { - struct task_struct *exiting = NULL; - - /* - * Attempt to acquire uaddr2 and wake the top waiter. If we - * intend to requeue waiters, force setting the FUTEX_WAITERS - * bit. We force this here where we are able to easily handle - * faults rather in the requeue loop below. - * - * Updates topwaiter::requeue_state if a top waiter exists. - */ - ret = futex_proxy_trylock_atomic(uaddr2, hb1, hb2, &key1, - &key2, &pi_state, - &exiting, nr_requeue); - - /* - * At this point the top_waiter has either taken uaddr2 or - * is waiting on it. In both cases pi_state has been - * established and an initial refcount on it. In case of an - * error there's nothing. - * - * The top waiter's requeue_state is up to date: - * - * - If the lock was acquired atomically (ret == 1), then - * the state is Q_REQUEUE_PI_LOCKED. - * - * The top waiter has been dequeued and woken up and can - * return to user space immediately. The kernel/user - * space state is consistent. In case that there must be - * more waiters requeued the WAITERS bit in the user - * space futex is set so the top waiter task has to go - * into the syscall slowpath to unlock the futex. This - * will block until this requeue operation has been - * completed and the hash bucket locks have been - * dropped. - * - * - If the trylock failed with an error (ret < 0) then - * the state is either Q_REQUEUE_PI_NONE, i.e. "nothing - * happened", or Q_REQUEUE_PI_IGNORE when there was an - * interleaved early wakeup. - * - * - If the trylock did not succeed (ret == 0) then the - * state is either Q_REQUEUE_PI_IN_PROGRESS or - * Q_REQUEUE_PI_WAIT if an early wakeup interleaved. - * This will be cleaned up in the loop below, which - * cannot fail because futex_proxy_trylock_atomic() did - * the same sanity checks for requeue_pi as the loop - * below does. - */ - switch (ret) { - case 0: - /* We hold a reference on the pi state. */ - break; - - case 1: - /* - * futex_proxy_trylock_atomic() acquired the user space - * futex. Adjust task_count. - */ - task_count++; - ret = 0; - break; - - /* - * If the above failed, then pi_state is NULL and - * waiter::requeue_state is correct. - */ - case -EFAULT: - double_unlock_hb(hb1, hb2); - futex_hb_waiters_dec(hb2); - ret = fault_in_user_writeable(uaddr2); - if (!ret) - goto retry; - return ret; - case -EBUSY: - case -EAGAIN: - /* - * Two reasons for this: - * - EBUSY: Owner is exiting and we just wait for the - * exit to complete. - * - EAGAIN: The user space value changed. - */ - double_unlock_hb(hb1, hb2); - futex_hb_waiters_dec(hb2); - /* - * Handle the case where the owner is in the middle of - * exiting. Wait for the exit to complete otherwise - * this task might loop forever, aka. live lock. - */ - wait_for_owner_exiting(ret, exiting); - cond_resched(); - goto retry; - default: - goto out_unlock; - } - } - - plist_for_each_entry_safe(this, next, &hb1->chain, list) { - if (task_count - nr_wake >= nr_requeue) - break; - - if (!futex_match(&this->key, &key1)) - continue; - - /* - * FUTEX_WAIT_REQUEUE_PI and FUTEX_CMP_REQUEUE_PI should always - * be paired with each other and no other futex ops. - * - * We should never be requeueing a futex_q with a pi_state, - * which is awaiting a futex_unlock_pi(). - */ - if ((requeue_pi && !this->rt_waiter) || - (!requeue_pi && this->rt_waiter) || - this->pi_state) { - ret = -EINVAL; - break; - } - - /* Plain futexes just wake or requeue and are done */ - if (!requeue_pi) { - if (++task_count <= nr_wake) - futex_wake_mark(&wake_q, this); - else - requeue_futex(this, hb1, hb2, &key2); - continue; - } - - /* Ensure we requeue to the expected futex for requeue_pi. */ - if (!futex_match(this->requeue_pi_key, &key2)) { - ret = -EINVAL; - break; - } - - /* - * Requeue nr_requeue waiters and possibly one more in the case - * of requeue_pi if we couldn't acquire the lock atomically. - * - * Prepare the waiter to take the rt_mutex. Take a refcount - * on the pi_state and store the pointer in the futex_q - * object of the waiter. - */ - get_pi_state(pi_state); - - /* Don't requeue when the waiter is already on the way out. */ - if (!futex_requeue_pi_prepare(this, pi_state)) { - /* - * Early woken waiter signaled that it is on the - * way out. Drop the pi_state reference and try the - * next waiter. @this->pi_state is still NULL. - */ - put_pi_state(pi_state); - continue; - } - - ret = rt_mutex_start_proxy_lock(&pi_state->pi_mutex, - this->rt_waiter, - this->task); - - if (ret == 1) { - /* - * We got the lock. We do neither drop the refcount - * on pi_state nor clear this->pi_state because the - * waiter needs the pi_state for cleaning up the - * user space value. It will drop the refcount - * after doing so. this::requeue_state is updated - * in the wakeup as well. - */ - requeue_pi_wake_futex(this, &key2, hb2); - task_count++; - } else if (!ret) { - /* Waiter is queued, move it to hb2 */ - requeue_futex(this, hb1, hb2, &key2); - futex_requeue_pi_complete(this, 0); - task_count++; - } else { - /* - * rt_mutex_start_proxy_lock() detected a potential - * deadlock when we tried to queue that waiter. - * Drop the pi_state reference which we took above - * and remove the pointer to the state from the - * waiters futex_q object. - */ - this->pi_state = NULL; - put_pi_state(pi_state); - futex_requeue_pi_complete(this, ret); - /* - * We stop queueing more waiters and let user space - * deal with the mess. - */ - break; - } - } - - /* - * We took an extra initial reference to the pi_state in - * futex_proxy_trylock_atomic(). We need to drop it here again. - */ - put_pi_state(pi_state); - -out_unlock: - double_unlock_hb(hb1, hb2); - wake_up_q(&wake_q); - futex_hb_waiters_dec(hb2); - return ret ? ret : task_count; -} - /* The key must be already stored in q->key. */ struct futex_hash_bucket *futex_q_lock(struct futex_q *q) __acquires(&hb->lock) @@ -1718,8 +983,8 @@ static long futex_wait_restart(struct restart_block *restart); * @q: the futex_q to queue up on * @timeout: the prepared hrtimer_sleeper, or null for no timeout */ -static void futex_wait_queue(struct futex_hash_bucket *hb, struct futex_q *q, - struct hrtimer_sleeper *timeout) +void futex_wait_queue(struct futex_hash_bucket *hb, struct futex_q *q, + struct hrtimer_sleeper *timeout) { /* * The task state is guaranteed to be set before another task can @@ -1766,8 +1031,8 @@ static void futex_wait_queue(struct futex_hash_bucket *hb, struct futex_q *q, * - 0 - uaddr contains val and hb has been locked; * - <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlocked */ -static int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags, - struct futex_q *q, struct futex_hash_bucket **hb) +int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags, + struct futex_q *q, struct futex_hash_bucket **hb) { u32 uval; int ret; @@ -1900,225 +1165,6 @@ static long futex_wait_restart(struct restart_block *restart) } -/** - * handle_early_requeue_pi_wakeup() - Handle early wakeup on the initial futex - * @hb: the hash_bucket futex_q was original enqueued on - * @q: the futex_q woken while waiting to be requeued - * @timeout: the timeout associated with the wait (NULL if none) - * - * Determine the cause for the early wakeup. - * - * Return: - * -EWOULDBLOCK or -ETIMEDOUT or -ERESTARTNOINTR - */ -static inline -int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb, - struct futex_q *q, - struct hrtimer_sleeper *timeout) -{ - int ret; - - /* - * With the hb lock held, we avoid races while we process the wakeup. - * We only need to hold hb (and not hb2) to ensure atomicity as the - * wakeup code can't change q.key from uaddr to uaddr2 if we hold hb. - * It can't be requeued from uaddr2 to something else since we don't - * support a PI aware source futex for requeue. - */ - WARN_ON_ONCE(&hb->lock != q->lock_ptr); - - /* - * We were woken prior to requeue by a timeout or a signal. - * Unqueue the futex_q and determine which it was. - */ - plist_del(&q->list, &hb->chain); - futex_hb_waiters_dec(hb); - - /* Handle spurious wakeups gracefully */ - ret = -EWOULDBLOCK; - if (timeout && !timeout->task) - ret = -ETIMEDOUT; - else if (signal_pending(current)) - ret = -ERESTARTNOINTR; - return ret; -} - -/** - * futex_wait_requeue_pi() - Wait on uaddr and take uaddr2 - * @uaddr: the futex we initially wait on (non-pi) - * @flags: futex flags (FLAGS_SHARED, FLAGS_CLOCKRT, etc.), they must be - * the same type, no requeueing from private to shared, etc. - * @val: the expected value of uaddr - * @abs_time: absolute timeout - * @bitset: 32 bit wakeup bitset set by userspace, defaults to all - * @uaddr2: the pi futex we will take prior to returning to user-space - * - * The caller will wait on uaddr and will be requeued by futex_requeue() to - * uaddr2 which must be PI aware and unique from uaddr. Normal wakeup will wake - * on uaddr2 and complete the acquisition of the rt_mutex prior to returning to - * userspace. This ensures the rt_mutex maintains an owner when it has waiters; - * without one, the pi logic would not know which task to boost/deboost, if - * there was a need to. - * - * We call schedule in futex_wait_queue() when we enqueue and return there - * via the following-- - * 1) wakeup on uaddr2 after an atomic lock acquisition by futex_requeue() - * 2) wakeup on uaddr2 after a requeue - * 3) signal - * 4) timeout - * - * If 3, cleanup and return -ERESTARTNOINTR. - * - * If 2, we may then block on trying to take the rt_mutex and return via: - * 5) successful lock - * 6) signal - * 7) timeout - * 8) other lock acquisition failure - * - * If 6, return -EWOULDBLOCK (restarting the syscall would do the same). - * - * If 4 or 7, we cleanup and return with -ETIMEDOUT. - * - * Return: - * - 0 - On success; - * - <0 - On error - */ -int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags, - u32 val, ktime_t *abs_time, u32 bitset, - u32 __user *uaddr2) -{ - struct hrtimer_sleeper timeout, *to; - struct rt_mutex_waiter rt_waiter; - struct futex_hash_bucket *hb; - union futex_key key2 = FUTEX_KEY_INIT; - struct futex_q q = futex_q_init; - struct rt_mutex_base *pi_mutex; - int res, ret; - - if (!IS_ENABLED(CONFIG_FUTEX_PI)) - return -ENOSYS; - - if (uaddr == uaddr2) - return -EINVAL; - - if (!bitset) - return -EINVAL; - - to = futex_setup_timer(abs_time, &timeout, flags, - current->timer_slack_ns); - - /* - * The waiter is allocated on our stack, manipulated by the requeue - * code while we sleep on uaddr. - */ - rt_mutex_init_waiter(&rt_waiter); - - ret = get_futex_key(uaddr2, flags & FLAGS_SHARED, &key2, FUTEX_WRITE); - if (unlikely(ret != 0)) - goto out; - - q.bitset = bitset; - q.rt_waiter = &rt_waiter; - q.requeue_pi_key = &key2; - - /* - * Prepare to wait on uaddr. On success, it holds hb->lock and q - * is initialized. - */ - ret = futex_wait_setup(uaddr, val, flags, &q, &hb); - if (ret) - goto out; - - /* - * The check above which compares uaddrs is not sufficient for - * shared futexes. We need to compare the keys: - */ - if (futex_match(&q.key, &key2)) { - futex_q_unlock(hb); - ret = -EINVAL; - goto out; - } - - /* Queue the futex_q, drop the hb lock, wait for wakeup. */ - futex_wait_queue(hb, &q, to); - - switch (futex_requeue_pi_wakeup_sync(&q)) { - case Q_REQUEUE_PI_IGNORE: - /* The waiter is still on uaddr1 */ - spin_lock(&hb->lock); - ret = handle_early_requeue_pi_wakeup(hb, &q, to); - spin_unlock(&hb->lock); - break; - - case Q_REQUEUE_PI_LOCKED: - /* The requeue acquired the lock */ - if (q.pi_state && (q.pi_state->owner != current)) { - spin_lock(q.lock_ptr); - ret = fixup_pi_owner(uaddr2, &q, true); - /* - * Drop the reference to the pi state which the - * requeue_pi() code acquired for us. - */ - put_pi_state(q.pi_state); - spin_unlock(q.lock_ptr); - /* - * Adjust the return value. It's either -EFAULT or - * success (1) but the caller expects 0 for success. - */ - ret = ret < 0 ? ret : 0; - } - break; - - case Q_REQUEUE_PI_DONE: - /* Requeue completed. Current is 'pi_blocked_on' the rtmutex */ - pi_mutex = &q.pi_state->pi_mutex; - ret = rt_mutex_wait_proxy_lock(pi_mutex, to, &rt_waiter); - - /* Current is not longer pi_blocked_on */ - spin_lock(q.lock_ptr); - if (ret && !rt_mutex_cleanup_proxy_lock(pi_mutex, &rt_waiter)) - ret = 0; - - debug_rt_mutex_free_waiter(&rt_waiter); - /* - * Fixup the pi_state owner and possibly acquire the lock if we - * haven't already. - */ - res = fixup_pi_owner(uaddr2, &q, !ret); - /* - * If fixup_pi_owner() returned an error, propagate that. If it - * acquired the lock, clear -ETIMEDOUT or -EINTR. - */ - if (res) - ret = (res < 0) ? res : 0; - - futex_unqueue_pi(&q); - spin_unlock(q.lock_ptr); - - if (ret == -EINTR) { - /* - * We've already been requeued, but cannot restart - * by calling futex_lock_pi() directly. We could - * restart this syscall, but it would detect that - * the user space "val" changed and return - * -EWOULDBLOCK. Save the overhead of the restart - * and return -EWOULDBLOCK directly. - */ - ret = -EWOULDBLOCK; - } - break; - default: - BUG(); - } - -out: - if (to) { - hrtimer_cancel(&to->timer); - destroy_hrtimer_on_stack(&to->timer); - } - return ret; -} - /* Constants for the pending_op argument of handle_futex_death */ #define HANDLE_DEATH_PENDING true #define HANDLE_DEATH_LIST false |