diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/mfd/da9062/registers.h | 3 | ||||
-rw-r--r-- | include/linux/mfd/da9063/pdata.h | 49 | ||||
-rw-r--r-- | include/linux/mfd/samsung/s2mps11.h | 5 | ||||
-rw-r--r-- | include/linux/mfd/wm831x/pdata.h | 1 | ||||
-rw-r--r-- | include/linux/regulator/driver.h | 6 | ||||
-rw-r--r-- | include/linux/regulator/max8952.h | 3 |
6 files changed, 14 insertions, 53 deletions
diff --git a/include/linux/mfd/da9062/registers.h b/include/linux/mfd/da9062/registers.h index fe04b708742b..2906bf6160fb 100644 --- a/include/linux/mfd/da9062/registers.h +++ b/include/linux/mfd/da9062/registers.h @@ -797,6 +797,9 @@ #define DA9062AA_BUCK3_SL_A_SHIFT 7 #define DA9062AA_BUCK3_SL_A_MASK BIT(7) +/* DA9062AA_VLDO[1-4]_A common */ +#define DA9062AA_VLDO_A_MIN_SEL 2 + /* DA9062AA_VLDO1_A = 0x0A9 */ #define DA9062AA_VLDO1_A_SHIFT 0 #define DA9062AA_VLDO1_A_MASK 0x3f diff --git a/include/linux/mfd/da9063/pdata.h b/include/linux/mfd/da9063/pdata.h index 77c566ab96ab..085edbf7601b 100644 --- a/include/linux/mfd/da9063/pdata.h +++ b/include/linux/mfd/da9063/pdata.h @@ -11,55 +11,6 @@ #ifndef __MFD_DA9063_PDATA_H__ #define __MFD_DA9063_PDATA_H__ -#include <linux/regulator/machine.h> - -/* - * Regulator configuration - */ -/* DA9063 and DA9063L regulator IDs */ -enum { - /* BUCKs */ - DA9063_ID_BCORE1, - DA9063_ID_BCORE2, - DA9063_ID_BPRO, - DA9063_ID_BMEM, - DA9063_ID_BIO, - DA9063_ID_BPERI, - - /* BCORE1 and BCORE2 in merged mode */ - DA9063_ID_BCORES_MERGED, - /* BMEM and BIO in merged mode */ - DA9063_ID_BMEM_BIO_MERGED, - /* When two BUCKs are merged, they cannot be reused separately */ - - /* LDOs on both DA9063 and DA9063L */ - DA9063_ID_LDO3, - DA9063_ID_LDO7, - DA9063_ID_LDO8, - DA9063_ID_LDO9, - DA9063_ID_LDO11, - - /* DA9063-only LDOs */ - DA9063_ID_LDO1, - DA9063_ID_LDO2, - DA9063_ID_LDO4, - DA9063_ID_LDO5, - DA9063_ID_LDO6, - DA9063_ID_LDO10, -}; - -/* Regulators platform data */ -struct da9063_regulator_data { - int id; - struct regulator_init_data *initdata; -}; - -struct da9063_regulators_pdata { - unsigned n_regulators; - struct da9063_regulator_data *regulator_data; -}; - - /* * RGB LED configuration */ diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h index fc67c9e75bba..4805c90609c4 100644 --- a/include/linux/mfd/samsung/s2mps11.h +++ b/include/linux/mfd/samsung/s2mps11.h @@ -190,4 +190,9 @@ enum s2mps11_regulators { #define S2MPS11_BUCK6_RAMP_EN_SHIFT 0 #define S2MPS11_PMIC_EN_SHIFT 6 +/* + * Bits for "enable suspend" (On/Off controlled by PWREN) + * are the same as in S2MPS14: S2MPS14_ENABLE_SUSPEND + */ + #endif /* __LINUX_MFD_S2MPS11_H */ diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index 071cdf3e16cf..986986fe4e4e 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -47,7 +47,6 @@ struct wm831x_battery_pdata { * I2C or SPI buses. */ struct wm831x_buckv_pdata { - int dvs_gpio; /** CPU GPIO to use for DVS switching */ int dvs_control_src; /** Hardware DVS source to use (1 or 2) */ int dvs_init_state; /** DVS state to expect on startup */ int dvs_state_gpio; /** CPU GPIO to use for monitoring status */ diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index d45ab52c91c9..08259a75fecd 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -283,6 +283,11 @@ enum regulator_type { * @vsel_range_mask: Mask for register bitfield used for range selector * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ * @vsel_mask: Mask for register bitfield used for selector + * @vsel_step: Specify the resolution of selector stepping when setting + * voltage. If 0, then no stepping is done (requested selector is + * set directly), if >0 then the regulator API will ramp the + * voltage up/down gradually each time increasing/decreasing the + * selector by the specified step value. * @csel_reg: Register for current limit selector using regmap set_current_limit * @csel_mask: Mask for register bitfield used for current limit selector * @apply_reg: Register for initiate voltage change on the output when @@ -357,6 +362,7 @@ struct regulator_desc { unsigned int vsel_range_mask; unsigned int vsel_reg; unsigned int vsel_mask; + unsigned int vsel_step; unsigned int csel_reg; unsigned int csel_mask; unsigned int apply_reg; diff --git a/include/linux/regulator/max8952.h b/include/linux/regulator/max8952.h index ebd99d2e62ad..8712c091abf0 100644 --- a/include/linux/regulator/max8952.h +++ b/include/linux/regulator/max8952.h @@ -105,9 +105,6 @@ enum { #define MAX8952_NUM_DVS_MODE 4 struct max8952_platform_data { - int gpio_vid0; - int gpio_vid1; - u32 default_mode; u32 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */ |