summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/mfd/bd9571mwv.h5
-rw-r--r--include/linux/mfd/lp8788.h16
-rw-r--r--include/linux/mfd/samsung/core.h4
-rw-r--r--include/linux/mfd/tps65090.h8
-rw-r--r--include/linux/mfd/tps6586x.h1
-rw-r--r--include/linux/regulator/ab8500.h157
-rw-r--r--include/linux/regulator/arizona-ldo1.h3
-rw-r--r--include/linux/regulator/consumer.h1
-rw-r--r--include/linux/regulator/driver.h27
-rw-r--r--include/linux/regulator/machine.h4
-rw-r--r--include/linux/regulator/max8952.h1
11 files changed, 45 insertions, 182 deletions
diff --git a/include/linux/mfd/bd9571mwv.h b/include/linux/mfd/bd9571mwv.h
index f0708ba4cbba..eb05569f752b 100644
--- a/include/linux/mfd/bd9571mwv.h
+++ b/include/linux/mfd/bd9571mwv.h
@@ -33,6 +33,11 @@
#define BD9571MWV_I2C_MD2_E1_BIT_2 0x12
#define BD9571MWV_BKUP_MODE_CNT 0x20
+#define BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK GENMASK(3, 0)
+#define BD9571MWV_BKUP_MODE_CNT_KEEPON_DDR0 BIT(0)
+#define BD9571MWV_BKUP_MODE_CNT_KEEPON_DDR1 BIT(1)
+#define BD9571MWV_BKUP_MODE_CNT_KEEPON_DDR0C BIT(2)
+#define BD9571MWV_BKUP_MODE_CNT_KEEPON_DDR1C BIT(3)
#define BD9571MWV_BKUP_MODE_STATUS 0x21
#define BD9571MWV_BKUP_RECOVERY_CNT 0x22
#define BD9571MWV_BKUP_CTRL_TIM_CNT 0x23
diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h
index 786bf6679a28..2010e0de3e34 100644
--- a/include/linux/mfd/lp8788.h
+++ b/include/linux/mfd/lp8788.h
@@ -182,20 +182,6 @@ struct lp8788_buck2_dvs {
};
/*
- * struct lp8788_ldo_enable_pin
- *
- * Basically, all LDOs are enabled through the I2C commands.
- * But ALDO 1 ~ 5, 7, DLDO 7, 9, 11 can be enabled by external gpio pins.
- *
- * @gpio : gpio number which is used for enabling ldos
- * @init_state : initial gpio state (ex. GPIOF_OUT_INIT_LOW)
- */
-struct lp8788_ldo_enable_pin {
- int gpio;
- int init_state;
-};
-
-/*
* struct lp8788_chg_param
* @addr : charging control register address (range : 0x11 ~ 0x1C)
* @val : charging parameter value
@@ -288,7 +274,6 @@ struct lp8788_vib_platform_data {
* @aldo_data : regulator initial data for analog ldo
* @buck1_dvs : gpio configurations for buck1 dvs
* @buck2_dvs : gpio configurations for buck2 dvs
- * @ldo_pin : gpio configurations for enabling LDOs
* @chg_pdata : platform data for charger driver
* @alarm_sel : rtc alarm selection (1 or 2)
* @bl_pdata : configurable data for backlight driver
@@ -306,7 +291,6 @@ struct lp8788_platform_data {
struct regulator_init_data *aldo_data[LP8788_NUM_ALDOS];
struct lp8788_buck1_dvs *buck1_dvs;
struct lp8788_buck2_dvs *buck2_dvs;
- struct lp8788_ldo_enable_pin *ldo_pin[EN_LDOS_MAX];
/* charger */
struct lp8788_charger_platform_data *chg_pdata;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 5a23dd4df432..28f4ae76271d 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -39,6 +39,8 @@
#define STEP_12_5_MV 12500
#define STEP_6_25_MV 6250
+struct gpio_desc;
+
enum sec_device_type {
S5M8751X,
S5M8763X,
@@ -151,7 +153,7 @@ struct sec_regulator_data {
int id;
struct regulator_init_data *initdata;
struct device_node *reg_node;
- int ext_control_gpio;
+ struct gpio_desc *ext_control_gpiod;
};
/*
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 67d144b3b8f9..f05bf4a146e2 100644
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -83,6 +83,8 @@ enum {
#define TPS65090_MAX_REG TPS65090_REG_AD_OUT2
#define TPS65090_NUM_REGS (TPS65090_MAX_REG + 1)
+struct gpio_desc;
+
struct tps65090 {
struct device *dev;
struct regmap *rmap;
@@ -95,8 +97,8 @@ struct tps65090 {
* @reg_init_data: The regulator init data.
* @enable_ext_control: Enable extrenal control or not. Only available for
* DCDC1, DCDC2 and DCDC3.
- * @gpio: Gpio number if external control is enabled and controlled through
- * gpio.
+ * @gpiod: Gpio descriptor if external control is enabled and controlled through
+ * gpio
* @overcurrent_wait_valid: True if the overcurrent_wait should be applied.
* @overcurrent_wait: Value to set as the overcurrent wait time. This is the
* actual bitfield value, not a time in ms (valid value are 0 - 3).
@@ -104,7 +106,7 @@ struct tps65090 {
struct tps65090_regulator_plat_data {
struct regulator_init_data *reg_init_data;
bool enable_ext_control;
- int gpio;
+ struct gpio_desc *gpiod;
bool overcurrent_wait_valid;
int overcurrent_wait;
};
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
index 2fe68e481230..b19c2801a30e 100644
--- a/include/linux/mfd/tps6586x.h
+++ b/include/linux/mfd/tps6586x.h
@@ -18,6 +18,7 @@
#define TPS658621A 0x15
#define TPS658621CD 0x2c
#define TPS658623 0x1b
+#define TPS658624 0x0a
#define TPS658640 0x01
#define TPS658640v2 0x02
#define TPS658643 0x03
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index d8ecefaf63ca..6d46f962685d 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -49,47 +49,7 @@ enum ab8505_regulator_id {
AB8505_NUM_REGULATORS,
};
-/* AB9540 regulators */
-enum ab9540_regulator_id {
- AB9540_LDO_AUX1,
- AB9540_LDO_AUX2,
- AB9540_LDO_AUX3,
- AB9540_LDO_AUX4,
- AB9540_LDO_INTCORE,
- AB9540_LDO_TVOUT,
- AB9540_LDO_USB,
- AB9540_LDO_AUDIO,
- AB9540_LDO_ANAMIC1,
- AB9540_LDO_ANAMIC2,
- AB9540_LDO_DMIC,
- AB9540_LDO_ANA,
- AB9540_SYSCLKREQ_2,
- AB9540_SYSCLKREQ_4,
- AB9540_NUM_REGULATORS,
-};
-
-/* AB8540 regulators */
-enum ab8540_regulator_id {
- AB8540_LDO_AUX1,
- AB8540_LDO_AUX2,
- AB8540_LDO_AUX3,
- AB8540_LDO_AUX4,
- AB8540_LDO_AUX5,
- AB8540_LDO_AUX6,
- AB8540_LDO_INTCORE,
- AB8540_LDO_TVOUT,
- AB8540_LDO_AUDIO,
- AB8540_LDO_ANAMIC1,
- AB8540_LDO_ANAMIC2,
- AB8540_LDO_DMIC,
- AB8540_LDO_ANA,
- AB8540_LDO_SDIO,
- AB8540_SYSCLKREQ_2,
- AB8540_SYSCLKREQ_4,
- AB8540_NUM_REGULATORS,
-};
-
-/* AB8500, AB8505, and AB9540 register initialization */
+/* AB8500 and AB8505 register initialization */
struct ab8500_regulator_reg_init {
int id;
u8 mask;
@@ -185,121 +145,6 @@ enum ab8505_regulator_reg {
AB8505_NUM_REGULATOR_REGISTERS,
};
-/* AB9540 registers */
-enum ab9540_regulator_reg {
- AB9540_REGUREQUESTCTRL1,
- AB9540_REGUREQUESTCTRL2,
- AB9540_REGUREQUESTCTRL3,
- AB9540_REGUREQUESTCTRL4,
- AB9540_REGUSYSCLKREQ1HPVALID1,
- AB9540_REGUSYSCLKREQ1HPVALID2,
- AB9540_REGUHWHPREQ1VALID1,
- AB9540_REGUHWHPREQ1VALID2,
- AB9540_REGUHWHPREQ2VALID1,
- AB9540_REGUHWHPREQ2VALID2,
- AB9540_REGUSWHPREQVALID1,
- AB9540_REGUSWHPREQVALID2,
- AB9540_REGUSYSCLKREQVALID1,
- AB9540_REGUSYSCLKREQVALID2,
- AB9540_REGUVAUX4REQVALID,
- AB9540_REGUMISC1,
- AB9540_VAUDIOSUPPLY,
- AB9540_REGUCTRL1VAMIC,
- AB9540_VSMPS1REGU,
- AB9540_VSMPS2REGU,
- AB9540_VSMPS3REGU, /* NOTE! PRCMU register */
- AB9540_VPLLVANAREGU,
- AB9540_EXTSUPPLYREGU,
- AB9540_VAUX12REGU,
- AB9540_VRF1VAUX3REGU,
- AB9540_VSMPS1SEL1,
- AB9540_VSMPS1SEL2,
- AB9540_VSMPS1SEL3,
- AB9540_VSMPS2SEL1,
- AB9540_VSMPS2SEL2,
- AB9540_VSMPS2SEL3,
- AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */
- AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */
- AB9540_VAUX1SEL,
- AB9540_VAUX2SEL,
- AB9540_VRF1VAUX3SEL,
- AB9540_REGUCTRL2SPARE,
- AB9540_VAUX4REQCTRL,
- AB9540_VAUX4REGU,
- AB9540_VAUX4SEL,
- AB9540_REGUCTRLDISCH,
- AB9540_REGUCTRLDISCH2,
- AB9540_REGUCTRLDISCH3,
- AB9540_NUM_REGULATOR_REGISTERS,
-};
-
-/* AB8540 registers */
-enum ab8540_regulator_reg {
- AB8540_REGUREQUESTCTRL1,
- AB8540_REGUREQUESTCTRL2,
- AB8540_REGUREQUESTCTRL3,
- AB8540_REGUREQUESTCTRL4,
- AB8540_REGUSYSCLKREQ1HPVALID1,
- AB8540_REGUSYSCLKREQ1HPVALID2,
- AB8540_REGUHWHPREQ1VALID1,
- AB8540_REGUHWHPREQ1VALID2,
- AB8540_REGUHWHPREQ2VALID1,
- AB8540_REGUHWHPREQ2VALID2,
- AB8540_REGUSWHPREQVALID1,
- AB8540_REGUSWHPREQVALID2,
- AB8540_REGUSYSCLKREQVALID1,
- AB8540_REGUSYSCLKREQVALID2,
- AB8540_REGUVAUX4REQVALID,
- AB8540_REGUVAUX5REQVALID,
- AB8540_REGUVAUX6REQVALID,
- AB8540_REGUVCLKBREQVALID,
- AB8540_REGUVRF1REQVALID,
- AB8540_REGUMISC1,
- AB8540_VAUDIOSUPPLY,
- AB8540_REGUCTRL1VAMIC,
- AB8540_VHSIC,
- AB8540_VSDIO,
- AB8540_VSMPS1REGU,
- AB8540_VSMPS2REGU,
- AB8540_VSMPS3REGU,
- AB8540_VPLLVANAREGU,
- AB8540_EXTSUPPLYREGU,
- AB8540_VAUX12REGU,
- AB8540_VRF1VAUX3REGU,
- AB8540_VSMPS1SEL1,
- AB8540_VSMPS1SEL2,
- AB8540_VSMPS1SEL3,
- AB8540_VSMPS2SEL1,
- AB8540_VSMPS2SEL2,
- AB8540_VSMPS2SEL3,
- AB8540_VSMPS3SEL1,
- AB8540_VSMPS3SEL2,
- AB8540_VAUX1SEL,
- AB8540_VAUX2SEL,
- AB8540_VRF1VAUX3SEL,
- AB8540_REGUCTRL2SPARE,
- AB8540_VAUX4REQCTRL,
- AB8540_VAUX4REGU,
- AB8540_VAUX4SEL,
- AB8540_VAUX5REQCTRL,
- AB8540_VAUX5REGU,
- AB8540_VAUX5SEL,
- AB8540_VAUX6REQCTRL,
- AB8540_VAUX6REGU,
- AB8540_VAUX6SEL,
- AB8540_VCLKBREQCTRL,
- AB8540_VCLKBREGU,
- AB8540_VCLKBSEL,
- AB8540_VRF1REQCTRL,
- AB8540_REGUCTRLDISCH,
- AB8540_REGUCTRLDISCH2,
- AB8540_REGUCTRLDISCH3,
- AB8540_REGUCTRLDISCH4,
- AB8540_VSIMSYSCLKCTRL,
- AB8540_VANAVPLLSEL,
- AB8540_NUM_REGULATOR_REGISTERS,
-};
-
/* AB8500 external regulators */
struct ab8500_ext_regulator_cfg {
bool hwreq; /* requires hw mode or high power mode */
diff --git a/include/linux/regulator/arizona-ldo1.h b/include/linux/regulator/arizona-ldo1.h
index c685f1277c63..fe74ab9990e6 100644
--- a/include/linux/regulator/arizona-ldo1.h
+++ b/include/linux/regulator/arizona-ldo1.h
@@ -14,9 +14,6 @@
struct regulator_init_data;
struct arizona_ldo1_pdata {
- /** GPIO controlling LDOENA, if any */
- int ldoena;
-
/** Regulator configuration for LDO1 */
const struct regulator_init_data *init_data;
};
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index df176d7c2b87..25602afd4844 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -80,6 +80,7 @@ struct regmap;
* These modes can be OR'ed together to make up a mask of valid register modes.
*/
+#define REGULATOR_MODE_INVALID 0x0
#define REGULATOR_MODE_FAST 0x1
#define REGULATOR_MODE_NORMAL 0x2
#define REGULATOR_MODE_IDLE 0x4
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 4fc96cb8e5d7..fc2dc8df476f 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -15,6 +15,8 @@
#ifndef __LINUX_REGULATOR_DRIVER_H_
#define __LINUX_REGULATOR_DRIVER_H_
+#define MAX_COUPLED 4
+
#include <linux/device.h>
#include <linux/notifier.h>
#include <linux/regulator/consumer.h>
@@ -81,9 +83,12 @@ struct regulator_linear_range {
* @set_voltage_sel: Set the voltage for the regulator using the specified
* selector.
* @map_voltage: Convert a voltage into a selector
- * @get_voltage: Return the currently configured voltage for the regulator.
+ * @get_voltage: Return the currently configured voltage for the regulator;
+ * return -ENOTRECOVERABLE if regulator can't be read at
+ * bootup and hasn't been set yet.
* @get_voltage_sel: Return the currently configured voltage selector for the
- * regulator.
+ * regulator; return -ENOTRECOVERABLE if regulator can't
+ * be read at bootup and hasn't been set yet.
* @list_voltage: Return one of the supported voltages, in microvolts; zero
* if the selector indicates a voltage that is unusable on this system;
* or negative errno. Selectors range from zero to one less than
@@ -407,6 +412,20 @@ struct regulator_config {
};
/*
+ * struct coupling_desc
+ *
+ * Describes coupling of regulators. Each regulator should have
+ * at least a pointer to itself in coupled_rdevs array.
+ * When a new coupled regulator is resolved, n_resolved is
+ * incremented.
+ */
+struct coupling_desc {
+ struct regulator_dev *coupled_rdevs[MAX_COUPLED];
+ int n_resolved;
+ int n_coupled;
+};
+
+/*
* struct regulator_dev
*
* Voltage / Current regulator class device. One for each
@@ -429,8 +448,12 @@ struct regulator_dev {
/* lists we own */
struct list_head consumer_list; /* consumers we supply */
+ struct coupling_desc coupling_desc;
+
struct blocking_notifier_head notifier;
struct mutex mutex; /* consumer lock */
+ struct task_struct *mutex_owner;
+ int ref_cnt;
struct module *owner;
struct device dev;
struct regulation_constraints *constraints;
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 93a04893c739..3468703d663a 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -103,6 +103,7 @@ struct regulator_state {
* @ilim_uA: Maximum input current.
* @system_load: Load that isn't captured by any consumer requests.
*
+ * @max_spread: Max possible spread between coupled regulators
* @valid_modes_mask: Mask of modes which may be configured by consumers.
* @valid_ops_mask: Operations which may be performed by consumers.
*
@@ -154,6 +155,9 @@ struct regulation_constraints {
int system_load;
+ /* used for coupled regulators */
+ int max_spread;
+
/* valid regulator operating modes for this machine */
unsigned int valid_modes_mask;
diff --git a/include/linux/regulator/max8952.h b/include/linux/regulator/max8952.h
index 4dbb63a1d4ab..686c42c041b5 100644
--- a/include/linux/regulator/max8952.h
+++ b/include/linux/regulator/max8952.h
@@ -120,7 +120,6 @@ enum {
struct max8952_platform_data {
int gpio_vid0;
int gpio_vid1;
- int gpio_en;
u32 default_mode;
u32 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 05:51:45 +0000