diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/pxa2xx_ssp.h | 1 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 145 |
2 files changed, 146 insertions, 0 deletions
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index c2f2574ff61c..2a097d176ba9 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -197,6 +197,7 @@ enum pxa_ssp_type { QUARK_X1000_SSP, LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */ LPSS_BYT_SSP, + LPSS_BSW_SSP, LPSS_SPT_SSP, LPSS_BXT_SSP, }; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 53be3a4c60cb..857a9a1d82b5 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -25,6 +25,7 @@ struct dma_chan; struct spi_master; struct spi_transfer; +struct spi_flash_read_message; /* * INTERFACES between SPI master-side drivers and SPI infrastructure. @@ -53,6 +54,10 @@ extern struct bus_type spi_bus_type; * * @transfer_bytes_histo: * transfer bytes histogramm + * + * @transfers_split_maxsize: + * number of transfers that have been split because of + * maxsize limit */ struct spi_statistics { spinlock_t lock; /* lock for the whole structure */ @@ -72,6 +77,8 @@ struct spi_statistics { #define SPI_STATISTICS_HISTO_SIZE 17 unsigned long transfer_bytes_histo[SPI_STATISTICS_HISTO_SIZE]; + + unsigned long transfers_split_maxsize; }; void spi_statistics_add_transfer_stats(struct spi_statistics *stats, @@ -303,6 +310,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @min_speed_hz: Lowest supported transfer speed * @max_speed_hz: Highest supported transfer speed * @flags: other constraints relevant to this driver + * @max_transfer_size: function that returns the max transfer size for + * a &spi_device; may be %NULL, so the default %SIZE_MAX will be used. * @bus_lock_spinlock: spinlock for SPI bus locking * @bus_lock_mutex: mutex for SPI bus locking * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use @@ -361,6 +370,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @handle_err: the subsystem calls the driver to handle an error that occurs * in the generic implementation of transfer_one_message(). * @unprepare_message: undo any work done by prepare_message(). + * @spi_flash_read: to support spi-controller hardwares that provide + * accelerated interface to read from flash devices. * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). @@ -369,6 +380,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @dma_rx: DMA receive channel * @dummy_rx: dummy receive buffer for full-duplex devices * @dummy_tx: dummy transmit buffer for full-duplex devices + * @fw_translate_cs: If the boot firmware uses different numbering scheme + * what Linux expects, this optional hook can be used to translate + * between the two. * * Each SPI master controller can communicate with one or more @spi_device * children. These make a small bus, sharing MOSI, MISO and SCK signals @@ -513,6 +527,8 @@ struct spi_master { struct spi_message *message); int (*unprepare_message)(struct spi_master *master, struct spi_message *message); + int (*spi_flash_read)(struct spi_device *spi, + struct spi_flash_read_message *msg); /* * These hooks are for drivers that use a generic implementation @@ -537,6 +553,8 @@ struct spi_master { /* dummy data for full duplex devices */ void *dummy_rx; void *dummy_tx; + + int (*fw_translate_cs)(struct spi_master *master, unsigned cs); }; static inline void *spi_master_get_devdata(struct spi_master *master) @@ -582,6 +600,38 @@ extern void spi_unregister_master(struct spi_master *master); extern struct spi_master *spi_busnum_to_master(u16 busnum); +/* + * SPI resource management while processing a SPI message + */ + +typedef void (*spi_res_release_t)(struct spi_master *master, + struct spi_message *msg, + void *res); + +/** + * struct spi_res - spi resource management structure + * @entry: list entry + * @release: release code called prior to freeing this resource + * @data: extra data allocated for the specific use-case + * + * this is based on ideas from devres, but focused on life-cycle + * management during spi_message processing + */ +struct spi_res { + struct list_head entry; + spi_res_release_t release; + unsigned long long data[]; /* guarantee ull alignment */ +}; + +extern void *spi_res_alloc(struct spi_device *spi, + spi_res_release_t release, + size_t size, gfp_t gfp); +extern void spi_res_add(struct spi_message *message, void *res); +extern void spi_res_free(void *res); + +extern void spi_res_release(struct spi_master *master, + struct spi_message *message); + /*---------------------------------------------------------------------------*/ /* @@ -720,6 +770,7 @@ struct spi_transfer { * @status: zero for success, else negative errno * @queue: for use by whichever driver currently owns the message * @state: for use by whichever driver currently owns the message + * @resources: for resource management when the spi message is processed * * A @spi_message is used to execute an atomic sequence of data transfers, * each represented by a struct spi_transfer. The sequence is "atomic" @@ -766,11 +817,15 @@ struct spi_message { */ struct list_head queue; void *state; + + /* list of spi_res reources when the spi message is processed */ + struct list_head resources; }; static inline void spi_message_init_no_memset(struct spi_message *m) { INIT_LIST_HEAD(&m->transfers); + INIT_LIST_HEAD(&m->resources); } static inline void spi_message_init(struct spi_message *m) @@ -854,6 +909,60 @@ spi_max_transfer_size(struct spi_device *spi) /*---------------------------------------------------------------------------*/ +/* SPI transfer replacement methods which make use of spi_res */ + +struct spi_replaced_transfers; +typedef void (*spi_replaced_release_t)(struct spi_master *master, + struct spi_message *msg, + struct spi_replaced_transfers *res); +/** + * struct spi_replaced_transfers - structure describing the spi_transfer + * replacements that have occurred + * so that they can get reverted + * @release: some extra release code to get executed prior to + * relasing this structure + * @extradata: pointer to some extra data if requested or NULL + * @replaced_transfers: transfers that have been replaced and which need + * to get restored + * @replaced_after: the transfer after which the @replaced_transfers + * are to get re-inserted + * @inserted: number of transfers inserted + * @inserted_transfers: array of spi_transfers of array-size @inserted, + * that have been replacing replaced_transfers + * + * note: that @extradata will point to @inserted_transfers[@inserted] + * if some extra allocation is requested, so alignment will be the same + * as for spi_transfers + */ +struct spi_replaced_transfers { + spi_replaced_release_t release; + void *extradata; + struct list_head replaced_transfers; + struct list_head *replaced_after; + size_t inserted; + struct spi_transfer inserted_transfers[]; +}; + +extern struct spi_replaced_transfers *spi_replace_transfers( + struct spi_message *msg, + struct spi_transfer *xfer_first, + size_t remove, + size_t insert, + spi_replaced_release_t release, + size_t extradatasize, + gfp_t gfp); + +/*---------------------------------------------------------------------------*/ + +/* SPI transfer transformation methods */ + +extern int spi_split_transfers_maxsize(struct spi_master *master, + struct spi_message *msg, + size_t maxsize, + gfp_t gfp); + +/*---------------------------------------------------------------------------*/ + /* All these synchronous SPI transfer routines are utilities layered * over the core async transfer primitive. Here, "synchronous" means * they will sleep uninterruptibly until the async transfer completes. @@ -1019,6 +1128,42 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd) return be16_to_cpu(result); } +/** + * struct spi_flash_read_message - flash specific information for + * spi-masters that provide accelerated flash read interfaces + * @buf: buffer to read data + * @from: offset within the flash from where data is to be read + * @len: length of data to be read + * @retlen: actual length of data read + * @read_opcode: read_opcode to be used to communicate with flash + * @addr_width: number of address bytes + * @dummy_bytes: number of dummy bytes + * @opcode_nbits: number of lines to send opcode + * @addr_nbits: number of lines to send address + * @data_nbits: number of lines for data + */ +struct spi_flash_read_message { + void *buf; + loff_t from; + size_t len; + size_t retlen; + u8 read_opcode; + u8 addr_width; + u8 dummy_bytes; + u8 opcode_nbits; + u8 addr_nbits; + u8 data_nbits; +}; + +/* SPI core interface for flash read support */ +static inline bool spi_flash_read_supported(struct spi_device *spi) +{ + return spi->master->spi_flash_read ? true : false; +} + +int spi_flash_read(struct spi_device *spi, + struct spi_flash_read_message *msg); + /*---------------------------------------------------------------------------*/ /* |