summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/acpi/acpi_numa.h1
-rw-r--r--include/linux/cpuset.h19
-rw-r--r--include/linux/dax.h1
-rw-r--r--include/linux/dma-mapping.h40
-rw-r--r--include/linux/ipv6.h6
-rw-r--r--include/linux/irq.h7
-rw-r--r--include/linux/kthread.h2
-rw-r--r--include/linux/kvm_host.h1
-rw-r--r--include/linux/libata.h2
-rw-r--r--include/linux/mlx5/mlx5_ifc.h10
-rw-r--r--include/linux/mm_types.h4
-rw-r--r--include/linux/nfs_xdr.h2
-rw-r--r--include/linux/nvme-fc.h19
-rw-r--r--include/linux/nvme.h2
-rw-r--r--include/linux/pagemap.h2
-rw-r--r--include/linux/perf/arm_pmu.h4
-rw-r--r--include/linux/phy.h2
-rw-r--r--include/linux/platform_data/hsmmc-omap.h10
-rw-r--r--include/linux/uuid.h14
-rw-r--r--include/linux/wait.h8
-rw-r--r--include/linux/workqueue.h4
-rw-r--r--include/net/sctp/sctp.h4
-rw-r--r--include/net/udp.h34
23 files changed, 135 insertions, 63 deletions
diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h
index d4b72944ccda..1e3a74f94131 100644
--- a/include/acpi/acpi_numa.h
+++ b/include/acpi/acpi_numa.h
@@ -3,6 +3,7 @@
#ifdef CONFIG_ACPI_NUMA
#include <linux/kernel.h>
+#include <linux/numa.h>
/* Proximity bitmap length */
#if MAX_NUMNODES > 256
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 119a3f9604b0..898cfe2eeb42 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -18,6 +18,19 @@
#ifdef CONFIG_CPUSETS
+/*
+ * Static branch rewrites can happen in an arbitrary order for a given
+ * key. In code paths where we need to loop with read_mems_allowed_begin() and
+ * read_mems_allowed_retry() to get a consistent view of mems_allowed, we need
+ * to ensure that begin() always gets rewritten before retry() in the
+ * disabled -> enabled transition. If not, then if local irqs are disabled
+ * around the loop, we can deadlock since retry() would always be
+ * comparing the latest value of the mems_allowed seqcount against 0 as
+ * begin() still would see cpusets_enabled() as false. The enabled -> disabled
+ * transition should happen in reverse order for the same reasons (want to stop
+ * looking at real value of mems_allowed.sequence in retry() first).
+ */
+extern struct static_key_false cpusets_pre_enable_key;
extern struct static_key_false cpusets_enabled_key;
static inline bool cpusets_enabled(void)
{
@@ -32,12 +45,14 @@ static inline int nr_cpusets(void)
static inline void cpuset_inc(void)
{
+ static_branch_inc(&cpusets_pre_enable_key);
static_branch_inc(&cpusets_enabled_key);
}
static inline void cpuset_dec(void)
{
static_branch_dec(&cpusets_enabled_key);
+ static_branch_dec(&cpusets_pre_enable_key);
}
extern int cpuset_init(void);
@@ -115,7 +130,7 @@ extern void cpuset_print_current_mems_allowed(void);
*/
static inline unsigned int read_mems_allowed_begin(void)
{
- if (!cpusets_enabled())
+ if (!static_branch_unlikely(&cpusets_pre_enable_key))
return 0;
return read_seqcount_begin(&current->mems_allowed_seq);
@@ -129,7 +144,7 @@ static inline unsigned int read_mems_allowed_begin(void)
*/
static inline bool read_mems_allowed_retry(unsigned int seq)
{
- if (!cpusets_enabled())
+ if (!static_branch_unlikely(&cpusets_enabled_key))
return false;
return read_seqcount_retry(&current->mems_allowed_seq, seq);
diff --git a/include/linux/dax.h b/include/linux/dax.h
index 794811875732..df97b7af7e2c 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -87,6 +87,7 @@ size_t dax_copy_from_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
void dax_flush(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
size_t size);
void dax_write_cache(struct dax_device *dax_dev, bool wc);
+bool dax_write_cache_enabled(struct dax_device *dax_dev);
/*
* We use lowest available bit in exceptional entry for locking, one bit for
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 843ab866e0f4..03c0196a6f24 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -157,16 +157,40 @@ static inline int is_device_dma_capable(struct device *dev)
* These three functions are only for dma allocator.
* Don't use them in device drivers.
*/
-int dma_alloc_from_coherent(struct device *dev, ssize_t size,
+int dma_alloc_from_dev_coherent(struct device *dev, ssize_t size,
dma_addr_t *dma_handle, void **ret);
-int dma_release_from_coherent(struct device *dev, int order, void *vaddr);
+int dma_release_from_dev_coherent(struct device *dev, int order, void *vaddr);
-int dma_mmap_from_coherent(struct device *dev, struct vm_area_struct *vma,
+int dma_mmap_from_dev_coherent(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, size_t size, int *ret);
+
+void *dma_alloc_from_global_coherent(ssize_t size, dma_addr_t *dma_handle);
+int dma_release_from_global_coherent(int order, void *vaddr);
+int dma_mmap_from_global_coherent(struct vm_area_struct *vma, void *cpu_addr,
+ size_t size, int *ret);
+
#else
-#define dma_alloc_from_coherent(dev, size, handle, ret) (0)
-#define dma_release_from_coherent(dev, order, vaddr) (0)
-#define dma_mmap_from_coherent(dev, vma, vaddr, order, ret) (0)
+#define dma_alloc_from_dev_coherent(dev, size, handle, ret) (0)
+#define dma_release_from_dev_coherent(dev, order, vaddr) (0)
+#define dma_mmap_from_dev_coherent(dev, vma, vaddr, order, ret) (0)
+
+static inline void *dma_alloc_from_global_coherent(ssize_t size,
+ dma_addr_t *dma_handle)
+{
+ return NULL;
+}
+
+static inline int dma_release_from_global_coherent(int order, void *vaddr)
+{
+ return 0;
+}
+
+static inline int dma_mmap_from_global_coherent(struct vm_area_struct *vma,
+ void *cpu_addr, size_t size,
+ int *ret)
+{
+ return 0;
+}
#endif /* CONFIG_HAVE_GENERIC_DMA_COHERENT */
#ifdef CONFIG_HAS_DMA
@@ -481,7 +505,7 @@ static inline void *dma_alloc_attrs(struct device *dev, size_t size,
BUG_ON(!ops);
- if (dma_alloc_from_coherent(dev, size, dma_handle, &cpu_addr))
+ if (dma_alloc_from_dev_coherent(dev, size, dma_handle, &cpu_addr))
return cpu_addr;
if (!arch_dma_alloc_attrs(&dev, &flag))
@@ -503,7 +527,7 @@ static inline void dma_free_attrs(struct device *dev, size_t size,
BUG_ON(!ops);
WARN_ON(irqs_disabled());
- if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+ if (dma_release_from_dev_coherent(dev, get_order(size), cpu_addr))
return;
if (!ops->free || !cpu_addr)
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index e1b442996f81..474d6bbc158c 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -128,6 +128,7 @@ struct inet6_skb_parm {
#define IP6SKB_FRAGMENTED 16
#define IP6SKB_HOPBYHOP 32
#define IP6SKB_L3SLAVE 64
+#define IP6SKB_JUMBOGRAM 128
};
#if defined(CONFIG_NET_L3_MASTER_DEV)
@@ -152,6 +153,11 @@ static inline int inet6_iif(const struct sk_buff *skb)
return l3_slave ? skb->skb_iif : IP6CB(skb)->iif;
}
+static inline bool inet6_is_jumbogram(const struct sk_buff *skb)
+{
+ return !!(IP6CB(skb)->flags & IP6SKB_JUMBOGRAM);
+}
+
/* can not be used in TCP layer after tcp_v6_fill_cb */
static inline bool inet6_exact_dif_match(struct net *net, struct sk_buff *skb)
{
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 00db35b61e9e..d2d543794093 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -388,7 +388,12 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
* @irq_mask_ack: ack and mask an interrupt source
* @irq_unmask: unmask an interrupt source
* @irq_eoi: end of interrupt
- * @irq_set_affinity: set the CPU affinity on SMP machines
+ * @irq_set_affinity: Set the CPU affinity on SMP machines. If the force
+ * argument is true, it tells the driver to
+ * unconditionally apply the affinity setting. Sanity
+ * checks against the supplied affinity mask are not
+ * required. This is used for CPU hotplug where the
+ * target CPU is not yet set in the cpu_online_mask.
* @irq_retrigger: resend an IRQ to the CPU
* @irq_set_type: set the flow type (IRQ_TYPE_LEVEL/etc.) of an IRQ
* @irq_set_wake: enable/disable power-management wake-on of an IRQ
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 4fec8b775895..82e197eeac91 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -15,7 +15,7 @@ struct task_struct *kthread_create_on_node(int (*threadfn)(void *data),
* @threadfn: the function to run in the thread
* @data: data pointer for @threadfn()
* @namefmt: printf-style format string for the thread name
- * @...: arguments for @namefmt.
+ * @arg...: arguments for @namefmt.
*
* This macro will create a kthread on the current node, leaving it in
* the stopped state. This is just a helper for kthread_create_on_node();
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 648b34cabb38..890b706d1943 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -445,6 +445,7 @@ struct kvm {
struct kvm_stat_data **debugfs_stat_data;
struct srcu_struct srcu;
struct srcu_struct irq_srcu;
+ pid_t userspace_pid;
};
#define kvm_err(fmt, ...) \
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 55de3da58b1c..931c32f1f18d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -435,7 +435,7 @@ enum {
ATA_HORKAGE_NOLPM = (1 << 20), /* don't use LPM */
ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */
ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
- ATA_HORKAGE_NO_NCQ_LOG = (1 << 23), /* don't use NCQ for log read */
+ ATA_HORKAGE_NO_DMA_LOG = (1 << 23), /* don't use DMA for log read */
ATA_HORKAGE_NOTRIM = (1 << 24), /* don't use TRIM */
ATA_HORKAGE_MAX_SEC_1024 = (1 << 25), /* Limit max sects to 1024 */
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 87869c04849a..3030121b4746 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -7749,8 +7749,10 @@ struct mlx5_ifc_pcam_reg_bits {
};
struct mlx5_ifc_mcam_enhanced_features_bits {
- u8 reserved_at_0[0x7f];
+ u8 reserved_at_0[0x7d];
+ u8 mtpps_enh_out_per_adj[0x1];
+ u8 mtpps_fs[0x1];
u8 pcie_performance_group[0x1];
};
@@ -8159,7 +8161,8 @@ struct mlx5_ifc_mtpps_reg_bits {
u8 reserved_at_78[0x4];
u8 cap_pin_4_mode[0x4];
- u8 reserved_at_80[0x80];
+ u8 field_select[0x20];
+ u8 reserved_at_a0[0x60];
u8 enable[0x1];
u8 reserved_at_101[0xb];
@@ -8174,8 +8177,9 @@ struct mlx5_ifc_mtpps_reg_bits {
u8 out_pulse_duration[0x10];
u8 out_periodic_adjustment[0x10];
+ u8 enhanced_out_periodic_adjustment[0x20];
- u8 reserved_at_1a0[0x60];
+ u8 reserved_at_1c0[0x20];
};
struct mlx5_ifc_mtppse_reg_bits {
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index ff151814a02d..7f384bb62d8e 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -495,6 +495,10 @@ struct mm_struct {
*/
bool tlb_flush_pending;
#endif
+#ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
+ /* See flush_tlb_batched_pending() */
+ bool tlb_flush_batched;
+#endif
struct uprobes_state uprobes_state;
#ifdef CONFIG_HUGETLB_PAGE
atomic_long_t hugetlb_usage;
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index ca3bcc4ed4e5..62cbcb842f99 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1235,7 +1235,7 @@ struct nfs41_state_protection {
struct nfs41_exchange_id_args {
struct nfs_client *client;
- nfs4_verifier *verifier;
+ nfs4_verifier verifier;
u32 flags;
struct nfs41_state_protection state_protect;
};
diff --git a/include/linux/nvme-fc.h b/include/linux/nvme-fc.h
index 21c37e39e41a..36cca93a5ff2 100644
--- a/include/linux/nvme-fc.h
+++ b/include/linux/nvme-fc.h
@@ -334,5 +334,24 @@ struct fcnvme_ls_disconnect_acc {
#define NVME_FC_LS_TIMEOUT_SEC 2 /* 2 seconds */
#define NVME_FC_TGTOP_TIMEOUT_SEC 2 /* 2 seconds */
+/*
+ * TRADDR string must be of form "nn-<16hexdigits>:pn-<16hexdigits>"
+ * the string is allowed to be specified with or without a "0x" prefix
+ * infront of the <16hexdigits>. Without is considered the "min" string
+ * and with is considered the "max" string. The hexdigits may be upper
+ * or lower case.
+ */
+#define NVME_FC_TRADDR_NNLEN 3 /* "?n-" */
+#define NVME_FC_TRADDR_OXNNLEN 5 /* "?n-0x" */
+#define NVME_FC_TRADDR_HEXNAMELEN 16
+#define NVME_FC_TRADDR_MINLENGTH \
+ (2 * (NVME_FC_TRADDR_NNLEN + NVME_FC_TRADDR_HEXNAMELEN) + 1)
+#define NVME_FC_TRADDR_MAXLENGTH \
+ (2 * (NVME_FC_TRADDR_OXNNLEN + NVME_FC_TRADDR_HEXNAMELEN) + 1)
+#define NVME_FC_TRADDR_MIN_PN_OFFSET \
+ (NVME_FC_TRADDR_NNLEN + NVME_FC_TRADDR_HEXNAMELEN + 1)
+#define NVME_FC_TRADDR_MAX_PN_OFFSET \
+ (NVME_FC_TRADDR_OXNNLEN + NVME_FC_TRADDR_HEXNAMELEN + 1)
+
#endif /* _NVME_FC_H */
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index bc74da018bdc..25d8225dbd04 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -1006,7 +1006,7 @@ static inline bool nvme_is_write(struct nvme_command *cmd)
* Why can't we simply have a Fabrics In and Fabrics out command?
*/
if (unlikely(cmd->common.opcode == nvme_fabrics_command))
- return cmd->fabrics.opcode & 1;
+ return cmd->fabrics.fctype & 1;
return cmd->common.opcode & 1;
}
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index baa9344dcd10..79b36f57c3ba 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -163,8 +163,6 @@ void release_pages(struct page **pages, int nr, bool cold);
*/
static inline int page_cache_get_speculative(struct page *page)
{
- VM_BUG_ON(in_interrupt());
-
#ifdef CONFIG_TINY_RCU
# ifdef CONFIG_PREEMPT_COUNT
VM_BUG_ON(!in_atomic() && !irqs_disabled());
diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
index 1360dd6d5e61..af0f44effd44 100644
--- a/include/linux/perf/arm_pmu.h
+++ b/include/linux/perf/arm_pmu.h
@@ -24,10 +24,14 @@
* interrupt and passed the address of the low level handler,
* and can be used to implement any platform specific handling
* before or after calling it.
+ *
+ * @irq_flags: if non-zero, these flags will be passed to request_irq
+ * when requesting interrupts for this PMU device.
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
+ unsigned long irq_flags;
};
#ifdef CONFIG_ARM_PMU
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2a9567bb8186..0bb5b212ab42 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -830,7 +830,7 @@ static inline int phy_read_status(struct phy_device *phydev)
dev_err(&_phydev->mdio.dev, format, ##args)
#define phydev_dbg(_phydev, format, args...) \
- dev_dbg(&_phydev->mdio.dev, format, ##args);
+ dev_dbg(&_phydev->mdio.dev, format, ##args)
static inline const char *phydev_name(const struct phy_device *phydev)
{
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
index 8e981be2e2c2..0ff1e0dba720 100644
--- a/include/linux/platform_data/hsmmc-omap.h
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -55,9 +55,6 @@ struct omap_hsmmc_platform_data {
u32 caps; /* Used for the MMC driver on 2430 and later */
u32 pm_caps; /* PM capabilities of the mmc */
- /* use the internal clock */
- unsigned internal_clock:1;
-
/* nonremovable e.g. eMMC */
unsigned nonremovable:1;
@@ -73,13 +70,6 @@ struct omap_hsmmc_platform_data {
int gpio_cd; /* gpio (card detect) */
int gpio_cod; /* gpio (cover detect) */
int gpio_wp; /* gpio (write protect) */
-
- int (*set_power)(struct device *dev, int power_on, int vdd);
- void (*remux)(struct device *dev, int power_on);
- /* Call back before enabling / disabling regulators */
- void (*before_set_reg)(struct device *dev, int power_on, int vdd);
- /* Call back after enabling / disabling regulators */
- void (*after_set_reg)(struct device *dev, int power_on, int vdd);
/* if we have special card, init it using this callback */
void (*init_card)(struct mmc_card *card);
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
index 2251e1925ea4..33b0bdbb613c 100644
--- a/include/linux/uuid.h
+++ b/include/linux/uuid.h
@@ -84,26 +84,12 @@ int guid_parse(const char *uuid, guid_t *u);
int uuid_parse(const char *uuid, uuid_t *u);
/* backwards compatibility, don't use in new code */
-typedef uuid_t uuid_be;
-#define UUID_BE(a, _b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
- UUID_INIT(a, _b, c, d0, d1, d2, d3, d4, d5, d6, d7)
-#define NULL_UUID_BE \
- UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00)
-
#define uuid_le_gen(u) guid_gen(u)
-#define uuid_be_gen(u) uuid_gen(u)
#define uuid_le_to_bin(guid, u) guid_parse(guid, u)
-#define uuid_be_to_bin(uuid, u) uuid_parse(uuid, u)
static inline int uuid_le_cmp(const guid_t u1, const guid_t u2)
{
return memcmp(&u1, &u2, sizeof(guid_t));
}
-static inline int uuid_be_cmp(const uuid_t u1, const uuid_t u2)
-{
- return memcmp(&u1, &u2, sizeof(uuid_t));
-}
-
#endif
diff --git a/include/linux/wait.h b/include/linux/wait.h
index b289c96151ee..5b74e36c0ca8 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -529,13 +529,13 @@ do { \
/**
* wait_event_interruptible_hrtimeout - sleep until a condition gets true or a timeout elapses
- * @wq_head: the waitqueue to wait on
+ * @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @timeout: timeout, as a ktime_t
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq_head is woken up.
+ * The @condition is checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
@@ -735,12 +735,12 @@ extern int do_wait_intr_irq(wait_queue_head_t *, wait_queue_entry_t *);
/**
* wait_event_killable - sleep until a condition gets true
- * @wq: the waitqueue to wait on
+ * @wq_head: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_KILLABLE) until the
* @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq is woken up.
+ * The @condition is checked each time the waitqueue @wq_head is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index c102ef65cb64..db6dc9dc0482 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -323,6 +323,7 @@ enum {
__WQ_DRAINING = 1 << 16, /* internal: workqueue is draining */
__WQ_ORDERED = 1 << 17, /* internal: workqueue is ordered */
+ __WQ_ORDERED_EXPLICIT = 1 << 18, /* internal: alloc_ordered_workqueue() */
__WQ_LEGACY = 1 << 18, /* internal: create*_workqueue() */
WQ_MAX_ACTIVE = 512, /* I like 512, better ideas? */
@@ -422,7 +423,8 @@ __alloc_workqueue_key(const char *fmt, unsigned int flags, int max_active,
* Pointer to the allocated workqueue on success, %NULL on failure.
*/
#define alloc_ordered_workqueue(fmt, flags, args...) \
- alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | (flags), 1, ##args)
+ alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | \
+ __WQ_ORDERED_EXPLICIT | (flags), 1, ##args)
#define create_workqueue(name) \
alloc_workqueue("%s", __WQ_LEGACY | WQ_MEM_RECLAIM, 1, (name))
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index 980807d7506f..45fd4c6056b5 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -469,7 +469,7 @@ _sctp_walk_params((pos), (chunk), ntohs((chunk)->chunk_hdr.length), member)
#define _sctp_walk_params(pos, chunk, end, member)\
for (pos.v = chunk->member;\
- (pos.v + offsetof(struct sctp_paramhdr, length) + sizeof(pos.p->length) <\
+ (pos.v + offsetof(struct sctp_paramhdr, length) + sizeof(pos.p->length) <=\
(void *)chunk + end) &&\
pos.v <= (void *)chunk + end - ntohs(pos.p->length) &&\
ntohs(pos.p->length) >= sizeof(struct sctp_paramhdr);\
@@ -481,7 +481,7 @@ _sctp_walk_errors((err), (chunk_hdr), ntohs((chunk_hdr)->length))
#define _sctp_walk_errors(err, chunk_hdr, end)\
for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \
sizeof(struct sctp_chunkhdr));\
- ((void *)err + offsetof(sctp_errhdr_t, length) + sizeof(err->length) <\
+ ((void *)err + offsetof(sctp_errhdr_t, length) + sizeof(err->length) <=\
(void *)chunk_hdr + end) &&\
(void *)err <= (void *)chunk_hdr + end - ntohs(err->length) &&\
ntohs(err->length) >= sizeof(sctp_errhdr_t); \
diff --git a/include/net/udp.h b/include/net/udp.h
index 972ce4baab6b..cc8036987dcb 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -260,6 +260,7 @@ static inline struct sk_buff *skb_recv_udp(struct sock *sk, unsigned int flags,
}
void udp_v4_early_demux(struct sk_buff *skb);
+void udp_sk_rx_dst_set(struct sock *sk, struct dst_entry *dst);
int udp_get_port(struct sock *sk, unsigned short snum,
int (*saddr_cmp)(const struct sock *,
const struct sock *));
@@ -305,33 +306,44 @@ struct sock *udp6_lib_lookup_skb(struct sk_buff *skb,
/* UDP uses skb->dev_scratch to cache as much information as possible and avoid
* possibly multiple cache miss on dequeue()
*/
-#if BITS_PER_LONG == 64
-
-/* truesize, len and the bit needed to compute skb_csum_unnecessary will be on
- * cold cache lines at recvmsg time.
- * skb->len can be stored on 16 bits since the udp header has been already
- * validated and pulled.
- */
struct udp_dev_scratch {
- u32 truesize;
+ /* skb->truesize and the stateless bit are embedded in a single field;
+ * do not use a bitfield since the compiler emits better/smaller code
+ * this way
+ */
+ u32 _tsize_state;
+
+#if BITS_PER_LONG == 64
+ /* len and the bit needed to compute skb_csum_unnecessary
+ * will be on cold cache lines at recvmsg time.
+ * skb->len can be stored on 16 bits since the udp header has been
+ * already validated and pulled.
+ */
u16 len;
bool is_linear;
bool csum_unnecessary;
+#endif
};
+static inline struct udp_dev_scratch *udp_skb_scratch(struct sk_buff *skb)
+{
+ return (struct udp_dev_scratch *)&skb->dev_scratch;
+}
+
+#if BITS_PER_LONG == 64
static inline unsigned int udp_skb_len(struct sk_buff *skb)
{
- return ((struct udp_dev_scratch *)&skb->dev_scratch)->len;
+ return udp_skb_scratch(skb)->len;
}
static inline bool udp_skb_csum_unnecessary(struct sk_buff *skb)
{
- return ((struct udp_dev_scratch *)&skb->dev_scratch)->csum_unnecessary;
+ return udp_skb_scratch(skb)->csum_unnecessary;
}
static inline bool udp_skb_is_linear(struct sk_buff *skb)
{
- return ((struct udp_dev_scratch *)&skb->dev_scratch)->is_linear;
+ return udp_skb_scratch(skb)->is_linear;
}
#else
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 18:04:50 +0000