diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/acpi/acoutput.h | 2 | ||||
-rw-r--r-- | include/acpi/acpixf.h | 6 | ||||
-rw-r--r-- | include/acpi/processor.h | 9 | ||||
-rw-r--r-- | include/linux/cpufreq.h | 47 | ||||
-rw-r--r-- | include/linux/interrupt.h | 10 | ||||
-rw-r--r-- | include/linux/pm_domain.h | 13 | ||||
-rw-r--r-- | include/linux/pm_opp.h | 27 | ||||
-rw-r--r-- | include/linux/sched.h | 9 | ||||
-rw-r--r-- | include/trace/events/power.h | 22 |
9 files changed, 90 insertions, 55 deletions
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h index 5bfc61943f88..34f601e7b88d 100644 --- a/include/acpi/acoutput.h +++ b/include/acpi/acoutput.h @@ -262,7 +262,7 @@ #define ACPI_GET_FUNCTION_NAME _acpi_function_name /* - * The Name parameter should be the procedure name as a quoted string. + * The Name parameter should be the procedure name as a non-quoted string. * The function name is also used by the function exit macros below. * Note: (const char) is used to be compatible with the debug interfaces * and macros such as __func__. diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index c96621e87c19..17556979dc79 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -897,11 +897,9 @@ ACPI_MSG_DEPENDENT_RETURN_VOID(ACPI_PRINTF_LIKE(3) acpi_warning(const char *module_name, u32 line_number, const char *format, ...)) -ACPI_MSG_DEPENDENT_RETURN_VOID(ACPI_PRINTF_LIKE(3) +ACPI_MSG_DEPENDENT_RETURN_VOID(ACPI_PRINTF_LIKE(1) void ACPI_INTERNAL_VAR_XFACE - acpi_info(const char *module_name, - u32 line_number, - const char *format, ...)) + acpi_info(const char *format, ...)) ACPI_MSG_DEPENDENT_RETURN_VOID(ACPI_PRINTF_LIKE(3) void ACPI_INTERNAL_VAR_XFACE acpi_bios_error(const char *module_name, diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 07fb100bcc68..6f1805dd5d3c 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -9,6 +9,7 @@ #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_DEVICE_NAME "Processor" #define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" +#define ACPI_PROCESSOR_CONTAINER_HID "ACPI0010" #define ACPI_PROCESSOR_BUSY_METRIC 10 @@ -394,14 +395,6 @@ static inline int acpi_processor_hotplug(struct acpi_processor *pr) } #endif /* CONFIG_ACPI_PROCESSOR_IDLE */ -#if defined(CONFIG_PM_SLEEP) & defined(CONFIG_ACPI_PROCESSOR_IDLE) -void acpi_processor_syscore_init(void); -void acpi_processor_syscore_exit(void); -#else -static inline void acpi_processor_syscore_init(void) {} -static inline void acpi_processor_syscore_exit(void) {} -#endif - /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); extern const struct thermal_cooling_device_ops processor_cooling_ops; diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 88a4215125bc..718e8725de8a 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -80,7 +80,6 @@ struct cpufreq_policy { unsigned int last_policy; /* policy before unplug */ struct cpufreq_governor *governor; /* see below */ void *governor_data; - bool governor_enabled; /* governor start/stop flag */ char last_governor[CPUFREQ_NAME_LEN]; /* last governor used */ struct work_struct update; /* if update_policy() needs to be @@ -100,10 +99,6 @@ struct cpufreq_policy { * - Any routine that will write to the policy structure and/or may take away * the policy altogether (eg. CPU hotplug), will hold this lock in write * mode before doing so. - * - * Additional rules: - * - Lock should not be held across - * __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); */ struct rw_semaphore rwsem; @@ -464,29 +459,8 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy, int cpufreq_register_governor(struct cpufreq_governor *governor); void cpufreq_unregister_governor(struct cpufreq_governor *governor); -/* CPUFREQ DEFAULT GOVERNOR */ -/* - * Performance governor is fallback governor if any other gov failed to auto - * load due latency restrictions - */ -#ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE -extern struct cpufreq_governor cpufreq_gov_performance; -#endif -#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE -#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_performance) -#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE) -extern struct cpufreq_governor cpufreq_gov_powersave; -#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_powersave) -#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE) -extern struct cpufreq_governor cpufreq_gov_userspace; -#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_userspace) -#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND) -extern struct cpufreq_governor cpufreq_gov_ondemand; -#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_ondemand) -#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE) -extern struct cpufreq_governor cpufreq_gov_conservative; -#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_conservative) -#endif +struct cpufreq_governor *cpufreq_default_governor(void); +struct cpufreq_governor *cpufreq_fallback_governor(void); /********************************************************************* * FREQUENCY TABLE HELPERS * @@ -525,16 +499,6 @@ static inline void dev_pm_opp_free_cpufreq_table(struct device *dev, } #endif -static inline bool cpufreq_next_valid(struct cpufreq_frequency_table **pos) -{ - while ((*pos)->frequency != CPUFREQ_TABLE_END) - if ((*pos)->frequency != CPUFREQ_ENTRY_INVALID) - return true; - else - (*pos)++; - return false; -} - /* * cpufreq_for_each_entry - iterate over a cpufreq_frequency_table * @pos: the cpufreq_frequency_table * to use as a loop cursor. @@ -551,8 +515,11 @@ static inline bool cpufreq_next_valid(struct cpufreq_frequency_table **pos) * @table: the cpufreq_frequency_table * to iterate over. */ -#define cpufreq_for_each_valid_entry(pos, table) \ - for (pos = table; cpufreq_next_valid(&pos); pos++) +#define cpufreq_for_each_valid_entry(pos, table) \ + for (pos = table; pos->frequency != CPUFREQ_TABLE_END; pos++) \ + if (pos->frequency == CPUFREQ_ENTRY_INVALID) \ + continue; \ + else int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table); diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 0e95fcc75b2a..358076eda364 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -125,6 +125,16 @@ struct irqaction { extern irqreturn_t no_action(int cpl, void *dev_id); +/* + * If a (PCI) device interrupt is not connected we set dev->irq to + * IRQ_NOTCONNECTED. This causes request_irq() to fail with -ENOTCONN, so we + * can distingiush that case from other error returns. + * + * 0x80000000 is guaranteed to be outside the available range of interrupts + * and easy to distinguish from other possible incorrect values. + */ +#define IRQ_NOTCONNECTED (1U << 31) + extern int __must_check request_threaded_irq(unsigned int irq, irq_handler_t handler, irq_handler_t thread_fn, diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index db21d3995f7e..49cd8890b873 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -19,6 +19,8 @@ /* Defines used for the flags field in the struct generic_pm_domain */ #define GENPD_FLAG_PM_CLK (1U << 0) /* PM domain uses PM clk */ +#define GENPD_MAX_NUM_STATES 8 /* Number of possible low power states */ + enum gpd_status { GPD_STATE_ACTIVE = 0, /* PM domain is active */ GPD_STATE_POWER_OFF, /* PM domain is off */ @@ -37,6 +39,11 @@ struct gpd_dev_ops { bool (*active_wakeup)(struct device *dev); }; +struct genpd_power_state { + s64 power_off_latency_ns; + s64 power_on_latency_ns; +}; + struct generic_pm_domain { struct dev_pm_domain domain; /* PM domain operations */ struct list_head gpd_list_node; /* Node in the global PM domains list */ @@ -54,9 +61,7 @@ struct generic_pm_domain { unsigned int prepared_count; /* Suspend counter of prepared devices */ bool suspend_power_off; /* Power status before system suspend */ int (*power_off)(struct generic_pm_domain *domain); - s64 power_off_latency_ns; int (*power_on)(struct generic_pm_domain *domain); - s64 power_on_latency_ns; struct gpd_dev_ops dev_ops; s64 max_off_time_ns; /* Maximum allowed "suspended" time. */ bool max_off_time_changed; @@ -66,6 +71,10 @@ struct generic_pm_domain { void (*detach_dev)(struct generic_pm_domain *domain, struct device *dev); unsigned int flags; /* Bit field of configs for genpd */ + struct genpd_power_state states[GENPD_MAX_NUM_STATES]; + unsigned int state_count; /* number of states */ + unsigned int state_idx; /* state that genpd will go to when off */ + }; static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd) diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 95403d2ccaf5..cccaf4a29e9f 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -34,6 +34,8 @@ bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp); int dev_pm_opp_get_opp_count(struct device *dev); unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev); +unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev); +unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev); struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev); struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, @@ -60,6 +62,9 @@ int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, void dev_pm_opp_put_supported_hw(struct device *dev); int dev_pm_opp_set_prop_name(struct device *dev, const char *name); void dev_pm_opp_put_prop_name(struct device *dev); +int dev_pm_opp_set_regulator(struct device *dev, const char *name); +void dev_pm_opp_put_regulator(struct device *dev); +int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq); #else static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) { @@ -86,6 +91,16 @@ static inline unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev) return 0; } +static inline unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) +{ + return 0; +} + +static inline unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev) +{ + return 0; +} + static inline struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev) { return NULL; @@ -151,6 +166,18 @@ static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name) static inline void dev_pm_opp_put_prop_name(struct device *dev) {} +static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name) +{ + return -EINVAL; +} + +static inline void dev_pm_opp_put_regulator(struct device *dev) {} + +static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) +{ + return -EINVAL; +} + #endif /* CONFIG_PM_OPP */ #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF) diff --git a/include/linux/sched.h b/include/linux/sched.h index c617ea12c6b7..eb7f2f84009b 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -3212,4 +3212,13 @@ static inline unsigned long rlimit_max(unsigned int limit) return task_rlimit_max(current, limit); } +#ifdef CONFIG_CPU_FREQ +struct update_util_data { + void (*func)(struct update_util_data *data, + u64 time, unsigned long util, unsigned long max); +}; + +void cpufreq_set_update_util_data(int cpu, struct update_util_data *data); +#endif /* CONFIG_CPU_FREQ */ + #endif diff --git a/include/trace/events/power.h b/include/trace/events/power.h index 284244ebfe8d..19e50300ce7d 100644 --- a/include/trace/events/power.h +++ b/include/trace/events/power.h @@ -38,6 +38,28 @@ DEFINE_EVENT(cpu, cpu_idle, TP_ARGS(state, cpu_id) ); +TRACE_EVENT(powernv_throttle, + + TP_PROTO(int chip_id, const char *reason, int pmax), + + TP_ARGS(chip_id, reason, pmax), + + TP_STRUCT__entry( + __field(int, chip_id) + __string(reason, reason) + __field(int, pmax) + ), + + TP_fast_assign( + __entry->chip_id = chip_id; + __assign_str(reason, reason); + __entry->pmax = pmax; + ), + + TP_printk("Chip %d Pmax %d %s", __entry->chip_id, + __entry->pmax, __get_str(reason)) +); + TRACE_EVENT(pstate_sample, TP_PROTO(u32 core_busy, |