diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/pxa2xx_ssp.h | 165 |
1 files changed, 86 insertions, 79 deletions
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 6facf27865f9..7f73b26ed22e 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * pxa2xx_ssp.h - * * Copyright (C) 2003 Russell King, All Rights Reserved. * * This driver supports the following PXA CPU/SSP ports:- @@ -16,10 +14,16 @@ #ifndef __LINUX_SSP_H #define __LINUX_SSP_H -#include <linux/list.h> +#include <linux/bits.h> +#include <linux/compiler_types.h> #include <linux/io.h> -#include <linux/of.h> +#include <linux/kconfig.h> +#include <linux/list.h> +#include <linux/types.h> +struct clk; +struct device; +struct device_node; /* * SSP Serial Port Registers @@ -43,130 +47,127 @@ #define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ /* Common PXA2xx bits first */ -#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ +#define SSCR0_DSS GENMASK(3, 0) /* Data Size Select (mask) */ #define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ -#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ +#define SSCR0_FRF GENMASK(5, 4) /* FRame Format (mask) */ #define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ #define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ #define SSCR0_National (0x2 << 4) /* National Microwire */ -#define SSCR0_ECS (1 << 6) /* External clock select */ -#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ +#define SSCR0_ECS BIT(6) /* External clock select */ +#define SSCR0_SSE BIT(7) /* Synchronous Serial Port Enable */ #define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */ /* PXA27x, PXA3xx */ -#define SSCR0_EDSS (1 << 20) /* Extended data size select */ -#define SSCR0_NCS (1 << 21) /* Network clock select */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ -#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ -#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ +#define SSCR0_EDSS BIT(20) /* Extended data size select */ +#define SSCR0_NCS BIT(21) /* Network clock select */ +#define SSCR0_RIM BIT(22) /* Receive FIFO overrrun interrupt mask */ +#define SSCR0_TUM BIT(23) /* Transmit FIFO underrun interrupt mask */ +#define SSCR0_FRDC GENMASK(26, 24) /* Frame rate divider control (mask) */ #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ -#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ -#define SSCR0_ACS (1 << 30) /* Audio clock select */ -#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ - - -#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ -#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ -#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ -#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ -#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ -#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ - -#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */ -#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ -#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ -#define SSSR_BSY (1 << 4) /* SSP Busy */ -#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ -#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ -#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ +#define SSCR0_FPCKE BIT(29) /* FIFO packing enable */ +#define SSCR0_ACS BIT(30) /* Audio clock select */ +#define SSCR0_MOD BIT(31) /* Mode (normal or network) */ + +#define SSCR1_RIE BIT(0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE BIT(1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM BIT(2) /* Loop-Back Mode */ +#define SSCR1_SPO BIT(3) /* Motorola SPI SSPSCLK polarity setting */ +#define SSCR1_SPH BIT(4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS BIT(5) /* Microwire Transmit Data Size */ + +#define SSSR_ALT_FRM_MASK GENMASK(1, 0) /* Masks the SFRM signal number */ +#define SSSR_TNF BIT(2) /* Transmit FIFO Not Full */ +#define SSSR_RNE BIT(3) /* Receive FIFO Not Empty */ +#define SSSR_BSY BIT(4) /* SSP Busy */ +#define SSSR_TFS BIT(5) /* Transmit FIFO Service Request */ +#define SSSR_RFS BIT(6) /* Receive FIFO Service Request */ +#define SSSR_ROR BIT(7) /* Receive FIFO Overrun */ #define RX_THRESH_DFLT 8 #define TX_THRESH_DFLT 8 -#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */ -#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */ +#define SSSR_TFL_MASK GENMASK(11, 8) /* Transmit FIFO Level mask */ +#define SSSR_RFL_MASK GENMASK(15, 12) /* Receive FIFO Level mask */ -#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TFT GENMASK(9, 6) /* Transmit FIFO Threshold (mask) */ #define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ -#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RFT GENMASK(13, 10) /* Receive FIFO Threshold (mask) */ #define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ #define RX_THRESH_CE4100_DFLT 2 #define TX_THRESH_CE4100_DFLT 2 -#define CE4100_SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */ -#define CE4100_SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */ +#define CE4100_SSSR_TFL_MASK GENMASK(9, 8) /* Transmit FIFO Level mask */ +#define CE4100_SSSR_RFL_MASK GENMASK(13, 12) /* Receive FIFO Level mask */ -#define CE4100_SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */ +#define CE4100_SSCR1_TFT GENMASK(7, 6) /* Transmit FIFO Threshold (mask) */ #define CE4100_SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */ -#define CE4100_SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */ +#define CE4100_SSCR1_RFT GENMASK(11, 10) /* Receive FIFO Threshold (mask) */ #define CE4100_SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */ /* QUARK_X1000 SSCR0 bit definition */ -#define QUARK_X1000_SSCR0_DSS (0x1F << 0) /* Data Size Select (mask) */ +#define QUARK_X1000_SSCR0_DSS GENMASK(4, 0) /* Data Size Select (mask) */ #define QUARK_X1000_SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..32] */ -#define QUARK_X1000_SSCR0_FRF (0x3 << 5) /* FRame Format (mask) */ +#define QUARK_X1000_SSCR0_FRF GENMASK(6, 5) /* FRame Format (mask) */ #define QUARK_X1000_SSCR0_Motorola (0x0 << 5) /* Motorola's Serial Peripheral Interface (SPI) */ #define RX_THRESH_QUARK_X1000_DFLT 1 #define TX_THRESH_QUARK_X1000_DFLT 16 -#define QUARK_X1000_SSSR_TFL_MASK (0x1F << 8) /* Transmit FIFO Level mask */ -#define QUARK_X1000_SSSR_RFL_MASK (0x1F << 13) /* Receive FIFO Level mask */ +#define QUARK_X1000_SSSR_TFL_MASK GENMASK(12, 8) /* Transmit FIFO Level mask */ +#define QUARK_X1000_SSSR_RFL_MASK GENMASK(17, 13) /* Receive FIFO Level mask */ -#define QUARK_X1000_SSCR1_TFT (0x1F << 6) /* Transmit FIFO Threshold (mask) */ +#define QUARK_X1000_SSCR1_TFT GENMASK(10, 6) /* Transmit FIFO Threshold (mask) */ #define QUARK_X1000_SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..32] */ -#define QUARK_X1000_SSCR1_RFT (0x1F << 11) /* Receive FIFO Threshold (mask) */ +#define QUARK_X1000_SSCR1_RFT GENMASK(15, 11) /* Receive FIFO Threshold (mask) */ #define QUARK_X1000_SSCR1_RxTresh(x) (((x) - 1) << 11) /* level [1..32] */ -#define QUARK_X1000_SSCR1_STRF (1 << 17) /* Select FIFO or EFWR */ -#define QUARK_X1000_SSCR1_EFWR (1 << 16) /* Enable FIFO Write/Read */ +#define QUARK_X1000_SSCR1_EFWR BIT(16) /* Enable FIFO Write/Read */ +#define QUARK_X1000_SSCR1_STRF BIT(17) /* Select FIFO or EFWR */ /* extra bits in PXA255, PXA26x and PXA27x SSP ports */ #define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ #define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ -#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ -#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ -#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ -#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ -#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ -#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ -#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ -#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ -#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ -#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ -#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ -#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ -#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ -#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */ -#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ -#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ -#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ - -#define SSSR_BCE (1 << 23) /* Bit Count Error */ -#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ -#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ -#define SSSR_EOC (1 << 20) /* End Of Chain */ -#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ -#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ +#define SSCR1_EFWR BIT(14) /* Enable FIFO Write/Read */ +#define SSCR1_STRF BIT(15) /* Select FIFO or EFWR */ +#define SSCR1_IFS BIT(16) /* Invert Frame Signal */ +#define SSCR1_PINTE BIT(18) /* Peripheral Trailing Byte Interrupt Enable */ +#define SSCR1_TINTE BIT(19) /* Receiver Time-out Interrupt enable */ +#define SSCR1_RSRE BIT(20) /* Receive Service Request Enable */ +#define SSCR1_TSRE BIT(21) /* Transmit Service Request Enable */ +#define SSCR1_TRAIL BIT(22) /* Trailing Byte */ +#define SSCR1_RWOT BIT(23) /* Receive Without Transmit */ +#define SSCR1_SFRMDIR BIT(24) /* Frame Direction */ +#define SSCR1_SCLKDIR BIT(25) /* Serial Bit Rate Clock Direction */ +#define SSCR1_ECRB BIT(26) /* Enable Clock request B */ +#define SSCR1_ECRA BIT(27) /* Enable Clock Request A */ +#define SSCR1_SCFR BIT(28) /* Slave Clock free Running */ +#define SSCR1_EBCEI BIT(29) /* Enable Bit Count Error interrupt */ +#define SSCR1_TTE BIT(30) /* TXD Tristate Enable */ +#define SSCR1_TTELP BIT(31) /* TXD Tristate Enable Last Phase */ + +#define SSSR_PINT BIT(18) /* Peripheral Trailing Byte Interrupt */ +#define SSSR_TINT BIT(19) /* Receiver Time-out Interrupt */ +#define SSSR_EOC BIT(20) /* End Of Chain */ +#define SSSR_TUR BIT(21) /* Transmit FIFO Under Run */ +#define SSSR_CSS BIT(22) /* Clock Synchronisation Status */ +#define SSSR_BCE BIT(23) /* Bit Count Error */ #define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ -#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ -#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_SFRMP BIT(2) /* Serial Frame Polarity */ +#define SSPSP_ETDS BIT(3) /* End of Transfer data State */ #define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ #define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ #define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ #define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ #define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ -#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ +#define SSPSP_FSRT BIT(25) /* Frame Sync Relative Timing */ /* PXA3xx */ #define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ #define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ #define SSPSP_TIMING_MASK (0x7f8001f0) -#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ -#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ #define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ #define SSACD_ACDS_1 (0) #define SSACD_ACDS_2 (1) @@ -174,18 +175,24 @@ #define SSACD_ACDS_8 (3) #define SSACD_ACDS_16 (4) #define SSACD_ACDS_32 (5) +#define SSACD_SCDB BIT(3) /* SSPSYSCLK Divider Bypass */ #define SSACD_SCDB_4X (0) #define SSACD_SCDB_1X (1) -#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ +#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ +#define SSACD_SCDX8 BIT(7) /* SYSCLK division ratio select */ /* LPSS SSP */ #define SSITF 0x44 /* TX FIFO trigger level */ +#define SSITF_TxHiThresh(x) (((x) - 1) << 0) #define SSITF_TxLoThresh(x) (((x) - 1) << 8) -#define SSITF_TxHiThresh(x) ((x) - 1) #define SSIRF 0x48 /* RX FIFO trigger level */ #define SSIRF_RxThresh(x) ((x) - 1) +/* LPT/WPT SSP */ +#define SSCR2 (0x40) /* SSP Command / Status 2 */ +#define SSPSP2 (0x44) /* SSP Programmable Serial Protocol 2 */ + enum pxa_ssp_type { SSP_UNDEFINED = 0, PXA25x_SSP, /* pxa 210, 250, 255, 26x */ |