diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-powerpc/ide.h (renamed from include/asm-ppc/ide.h) | 29 | ||||
| -rw-r--r-- | include/asm-powerpc/machdep.h | 4 | ||||
| -rw-r--r-- | include/asm-powerpc/ppc-pci.h | 1 | ||||
| -rw-r--r-- | include/asm-powerpc/prom.h | 2 | ||||
| -rw-r--r-- | include/asm-powerpc/reg.h | 9 | ||||
| -rw-r--r-- | include/asm-powerpc/smp.h | 4 | ||||
| -rw-r--r-- | include/asm-powerpc/smu.h | 199 | ||||
| -rw-r--r-- | include/asm-powerpc/xmon.h | 1 | ||||
| -rw-r--r-- | include/asm-ppc/btext.h | 22 | ||||
| -rw-r--r-- | include/asm-ppc/io.h | 12 | ||||
| -rw-r--r-- | include/asm-ppc/kgdb.h | 2 | ||||
| -rw-r--r-- | include/asm-ppc/prom.h | 2 | ||||
| -rw-r--r-- | include/asm-ppc64/ide.h | 30 | ||||
| -rw-r--r-- | include/asm-ppc64/pci.h | 8 | ||||
| -rw-r--r-- | include/asm-ppc64/ppcdebug.h | 108 | ||||
| -rw-r--r-- | include/asm-ppc64/prom.h | 2 | ||||
| -rw-r--r-- | include/asm-ppc64/udbg.h | 3 | ||||
| -rw-r--r-- | include/linux/proc_fs.h | 9 |
18 files changed, 261 insertions, 186 deletions
diff --git a/include/asm-ppc/ide.h b/include/asm-powerpc/ide.h index 7d6e6599fac4..da5f640480cf 100644 --- a/include/asm-ppc/ide.h +++ b/include/asm-powerpc/ide.h @@ -1,24 +1,27 @@ /* - * linux/include/asm-ppc/ide.h + * Copyright (C) 1994-1996 Linus Torvalds & authors * - * Copyright (C) 1994-1996 Linus Torvalds & authors */ - -/* - * This file contains the ppc architecture specific IDE code. + * This file contains the powerpc architecture specific IDE code. */ - -#ifndef __ASMPPC_IDE_H -#define __ASMPPC_IDE_H +#ifndef _ASM_POWERPC_IDE_H +#define _ASM_POWERPC_IDE_H #ifdef __KERNEL__ +#ifndef __powerpc64__ #include <linux/sched.h> #include <asm/mpc8xx.h> +#endif #ifndef MAX_HWIFS +#ifdef __powerpc64__ +#define MAX_HWIFS 10 +#else #define MAX_HWIFS 8 #endif +#endif +#ifndef __powerpc64__ #include <linux/config.h> #include <linux/hdreg.h> #include <linux/ioport.h> @@ -59,9 +62,6 @@ static __inline__ unsigned long ide_default_io_base(int index) return 0; } -#define IDE_ARCH_OBSOLETE_INIT -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - #ifdef CONFIG_PCI #define ide_init_default_irq(base) (0) #else @@ -73,6 +73,11 @@ static __inline__ unsigned long ide_default_io_base(int index) #define ide_ack_intr(hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1) #endif +#endif /* __powerpc64__ */ + +#define IDE_ARCH_OBSOLETE_INIT +#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ + #endif /* __KERNEL__ */ -#endif /* __ASMPPC_IDE_H */ +#endif /* _ASM_POWERPC_IDE_H */ diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index fa03864d06eb..5670f0cd6143 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -82,7 +82,6 @@ struct machdep_calls { void (*iommu_dev_setup)(struct pci_dev *dev); void (*iommu_bus_setup)(struct pci_bus *bus); void (*irq_bus_setup)(struct pci_bus *bus); - int (*set_dabr)(unsigned long dabr); #endif int (*probe)(int platform); @@ -158,6 +157,9 @@ struct machdep_calls { platform, called once per cpu. */ void (*enable_pmcs)(void); + /* Set DABR for this platform, leave empty for default implemenation */ + int (*set_dabr)(unsigned long dabr); + #ifdef CONFIG_PPC32 /* XXX for now */ /* A general init function, called by ppc_init in init/main.c. May be NULL. */ diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index a88728fba8f6..13aacff755f3 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -34,6 +34,7 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, void pci_devs_phb_init(void); void pci_devs_phb_init_dynamic(struct pci_controller *phb); +void __devinit scan_phb(struct pci_controller *hose); /* PCI address cache management routines */ void pci_addr_cache_insert_device(struct pci_dev *dev); diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h index 7587bf5f38c6..f999df1c5c90 100644 --- a/include/asm-powerpc/prom.h +++ b/include/asm-powerpc/prom.h @@ -203,7 +203,7 @@ extern int prom_n_addr_cells(struct device_node* np); extern int prom_n_size_cells(struct device_node* np); extern int prom_n_intr_cells(struct device_node* np); extern void prom_get_irq_senses(unsigned char *senses, int off, int max); -extern void prom_add_property(struct device_node* np, struct property* prop); +extern int prom_add_property(struct device_node* np, struct property* prop); #ifdef CONFIG_PPC32 /* diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index da848412f11b..489cf4c99c21 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -396,6 +396,9 @@ #define SPRN_VRSAVE 0x100 /* Vector Register Save Register */ #define SPRN_XER 0x001 /* Fixed Point Exception Register */ +#define SPRN_SCOMC 0x114 /* SCOM Access Control */ +#define SPRN_SCOMD 0x115 /* SCOM Access DATA */ + /* Performance monitor SPRs */ #ifdef CONFIG_PPC64 #define SPRN_MMCR0 795 @@ -594,7 +597,11 @@ static inline void ppc64_runlatch_off(void) mtspr(SPRN_CTRLT, ctrl); } } -#endif + +extern unsigned long scom970_read(unsigned int address); +extern void scom970_write(unsigned int address, unsigned long value); + +#endif /* CONFIG_PPC64 */ #define __get_SP() ({unsigned long sp; \ asm volatile("mr %0,1": "=r" (sp)); sp;}) diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h index 8bcdd0faefea..98581e5a8279 100644 --- a/include/asm-powerpc/smp.h +++ b/include/asm-powerpc/smp.h @@ -86,7 +86,6 @@ extern void __cpu_die(unsigned int cpu); #else /* for UP */ #define smp_setup_cpu_maps() -#define smp_release_cpus() #endif /* CONFIG_SMP */ @@ -94,6 +93,9 @@ extern void __cpu_die(unsigned int cpu); #define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id) #define set_hard_smp_processor_id(CPU, VAL) \ do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0) + +extern void smp_release_cpus(void); + #else /* 32-bit */ #ifndef CONFIG_SMP diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h index dee8eefe47bc..76c29a9784dd 100644 --- a/include/asm-powerpc/smu.h +++ b/include/asm-powerpc/smu.h @@ -20,16 +20,52 @@ /* * Partition info commands * - * I do not know what those are for at this point + * These commands are used to retreive the sdb-partition-XX datas from + * the SMU. The lenght is always 2. First byte is the subcommand code + * and second byte is the partition ID. + * + * The reply is 6 bytes: + * + * - 0..1 : partition address + * - 2 : a byte containing the partition ID + * - 3 : length (maybe other bits are rest of header ?) + * + * The data must then be obtained with calls to another command: + * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below). */ #define SMU_CMD_PARTITION_COMMAND 0x3e +#define SMU_CMD_PARTITION_LATEST 0x01 +#define SMU_CMD_PARTITION_BASE 0x02 +#define SMU_CMD_PARTITION_UPDATE 0x03 /* * Fan control * - * This is a "mux" for fan control commands, first byte is the - * "sub" command. + * This is a "mux" for fan control commands. The command seem to + * act differently based on the number of arguments. With 1 byte + * of argument, this seem to be queries for fans status, setpoint, + * etc..., while with 0xe arguments, we will set the fans speeds. + * + * Queries (1 byte arg): + * --------------------- + * + * arg=0x01: read RPM fans status + * arg=0x02: read RPM fans setpoint + * arg=0x11: read PWM fans status + * arg=0x12: read PWM fans setpoint + * + * the "status" queries return the current speed while the "setpoint" ones + * return the programmed/target speed. It _seems_ that the result is a bit + * mask in the first byte of active/available fans, followed by 6 words (16 + * bits) containing the requested speed. + * + * Setpoint (14 bytes arg): + * ------------------------ + * + * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the + * mask of fans affected by the command. Followed by 6 words containing the + * setpoint value for selected fans in the mask (or 0 if mask value is 0) */ #define SMU_CMD_FAN_COMMAND 0x4a @@ -144,7 +180,11 @@ * - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is * used to set the voltage slewing point. The SMU replies with "DONE" * I yet have to figure out their exact meaning of those 3 bytes in - * both cases. + * both cases. They seem to be: + * x = processor mask + * y = op. point index + * z = processor freq. step index + * I haven't yet decyphered result codes * */ #define SMU_CMD_POWER_COMMAND 0xaa @@ -152,6 +192,14 @@ #define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN" #define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW" +/* + * Read ADC sensors + * + * This command takes one byte of parameter: the sensor ID (or "reg" + * value in the device-tree) and returns a 16 bits value + */ +#define SMU_CMD_READ_ADC 0xd8 + /* Misc commands * * This command seem to be a grab bag of various things @@ -172,6 +220,25 @@ * Misc commands * * This command seem to be a grab bag of various things + * + * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to + * transfer blocks of data from the SMU. So far, I've decrypted it's + * usage to retreive partition data. In order to do that, you have to + * break your transfer in "chunks" since that command cannot transfer + * more than a chunk at a time. The chunk size used by OF is 0xe bytes, + * but it seems that the darwin driver will let you do 0x1e bytes if + * your "PMU" version is >= 0x30. You can get the "PMU" version apparently + * either in the last 16 bits of property "smu-version-pmu" or as the 16 + * bytes at offset 1 of "smu-version-info" + * + * For each chunk, the command takes 7 bytes of arguments: + * byte 0: subcommand code (0x02) + * byte 1: 0x04 (always, I don't know what it means, maybe the address + * space to use or some other nicety. It's hard coded in OF) + * byte 2..5: SMU address of the chunk (big endian 32 bits) + * byte 6: size to transfer (up to max chunk size) + * + * The data is returned directly */ #define SMU_CMD_MISC_ee_COMMAND 0xee #define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02 @@ -333,6 +400,128 @@ extern int smu_queue_i2c(struct smu_i2c_cmd *cmd); #endif /* __KERNEL__ */ + +/* + * - SMU "sdb" partitions informations - + */ + + +/* + * Partition header format + */ +struct smu_sdbp_header { + __u8 id; + __u8 len; + __u8 version; + __u8 flags; +}; + + + /* + * demangle 16 and 32 bits integer in some SMU partitions + * (currently, afaik, this concerns only the FVT partition + * (0x12) + */ +#define SMU_U16_MIX(x) le16_to_cpu(x); +#define SMU_U32_MIX(x) ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8)) + + +/* This is the definition of the SMU sdb-partition-0x12 table (called + * CPU F/V/T operating points in Darwin). The definition for all those + * SMU tables should be moved to some separate file + */ +#define SMU_SDB_FVT_ID 0x12 + +struct smu_sdbp_fvt { + __u32 sysclk; /* Base SysClk frequency in Hz for + * this operating point. Value need to + * be unmixed with SMU_U32_MIX() + */ + __u8 pad; + __u8 maxtemp; /* Max temp. supported by this + * operating point + */ + + __u16 volts[3]; /* CPU core voltage for the 3 + * PowerTune modes, a mode with + * 0V = not supported. Value need + * to be unmixed with SMU_U16_MIX() + */ +}; + +/* This partition contains voltage & current sensor calibration + * informations + */ +#define SMU_SDB_CPUVCP_ID 0x21 + +struct smu_sdbp_cpuvcp { + __u16 volt_scale; /* u4.12 fixed point */ + __s16 volt_offset; /* s4.12 fixed point */ + __u16 curr_scale; /* u4.12 fixed point */ + __s16 curr_offset; /* s4.12 fixed point */ + __s32 power_quads[3]; /* s4.28 fixed point */ +}; + +/* This partition contains CPU thermal diode calibration + */ +#define SMU_SDB_CPUDIODE_ID 0x18 + +struct smu_sdbp_cpudiode { + __u16 m_value; /* u1.15 fixed point */ + __s16 b_value; /* s10.6 fixed point */ + +}; + +/* This partition contains Slots power calibration + */ +#define SMU_SDB_SLOTSPOW_ID 0x78 + +struct smu_sdbp_slotspow { + __u16 pow_scale; /* u4.12 fixed point */ + __s16 pow_offset; /* s4.12 fixed point */ +}; + +/* This partition contains machine specific version information about + * the sensor/control layout + */ +#define SMU_SDB_SENSORTREE_ID 0x25 + +struct smu_sdbp_sensortree { + u8 model_id; + u8 unknown[3]; +}; + +/* This partition contains CPU thermal control PID informations. So far + * only single CPU machines have been seen with an SMU, so we assume this + * carries only informations for those + */ +#define SMU_SDB_CPUPIDDATA_ID 0x17 + +struct smu_sdbp_cpupiddata { + u8 unknown1; + u8 target_temp_delta; + u8 unknown2; + u8 history_len; + s16 power_adj; + u16 max_power; + s32 gp,gr,gd; +}; + + +/* Other partitions without known structures */ +#define SMU_SDB_DEBUG_SWITCHES_ID 0x05 + +#ifdef __KERNEL__ +/* + * This returns the pointer to an SMU "sdb" partition data or NULL + * if not found. The data format is described below + */ +extern struct smu_sdbp_header *smu_get_sdb_partition(int id, + unsigned int *size); + +#endif /* __KERNEL__ */ + + /* * - Userland interface - */ @@ -365,8 +554,10 @@ struct smu_user_cmd_hdr __u32 cmdtype; #define SMU_CMDTYPE_SMU 0 /* SMU command */ #define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */ +#define SMU_CMDTYPE_GET_PARTITION 2 /* retreive an sdb partition */ __u8 cmd; /* SMU command byte */ + __u8 pad[3]; /* padding */ __u32 data_len; /* Lenght of data following */ }; diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h index 43f7129984c7..ace2072d4a83 100644 --- a/include/asm-powerpc/xmon.h +++ b/include/asm-powerpc/xmon.h @@ -7,6 +7,7 @@ struct pt_regs; extern int xmon(struct pt_regs *excp); extern void xmon_printf(const char *fmt, ...); extern void xmon_init(int); +extern void xmon_map_scc(void); #endif #endif diff --git a/include/asm-ppc/btext.h b/include/asm-ppc/btext.h index 36c7640d00f2..ccaefabe0bf5 100644 --- a/include/asm-ppc/btext.h +++ b/include/asm-ppc/btext.h @@ -17,18 +17,18 @@ extern unsigned long disp_BAT[2]; extern boot_infos_t disp_bi; extern int boot_text_mapped; -void btext_init(boot_infos_t *bi); -void btext_welcome(void); -void btext_prepare_BAT(void); -void btext_setup_display(int width, int height, int depth, int pitch, - unsigned long address); -void map_boot_text(void); -void btext_update_display(unsigned long phys, int width, int height, - int depth, int pitch); +extern void init_boot_display(void); +extern void btext_welcome(void); +extern void btext_prepare_BAT(void); +extern void btext_setup_display(int width, int height, int depth, int pitch, + unsigned long address); +extern void map_boot_text(void); +extern void btext_update_display(unsigned long phys, int width, int height, + int depth, int pitch); -void btext_drawchar(char c); -void btext_drawstring(const char *str); -void btext_drawhex(unsigned long v); +extern void btext_drawchar(char c); +extern void btext_drawstring(const char *str); +extern void btext_drawhex(unsigned long v); #endif /* __KERNEL__ */ #endif /* __PPC_BTEXT_H */ diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index f7f614dfc648..2bfdf9c98459 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -237,9 +237,9 @@ static inline void __raw_writel(__u32 b, volatile void __iomem *addr) #define outsl(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl)) /* - * On powermacs, we will get a machine check exception if we - * try to read data from a non-existent I/O port. Because the - * machine check is an asynchronous exception, it isn't + * On powermacs and 8xx we will get a machine check exception + * if we try to read data from a non-existent I/O port. Because + * the machine check is an asynchronous exception, it isn't * well-defined which instruction SRR0 will point to when the * exception occurs. * With the sequence below (twi; isync; nop), we have found that @@ -258,7 +258,7 @@ extern __inline__ unsigned int name(unsigned int port) \ { \ unsigned int x; \ __asm__ __volatile__( \ - op " %0,0,%1\n" \ + "0:" op " %0,0,%1\n" \ "1: twi 0,%0,0\n" \ "2: isync\n" \ "3: nop\n" \ @@ -269,6 +269,7 @@ extern __inline__ unsigned int name(unsigned int port) \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ " .align 2\n" \ + " .long 0b,5b\n" \ " .long 1b,5b\n" \ " .long 2b,5b\n" \ " .long 3b,5b\n" \ @@ -282,11 +283,12 @@ extern __inline__ unsigned int name(unsigned int port) \ extern __inline__ void name(unsigned int val, unsigned int port) \ { \ __asm__ __volatile__( \ - op " %0,0,%1\n" \ + "0:" op " %0,0,%1\n" \ "1: sync\n" \ "2:\n" \ ".section __ex_table,\"a\"\n" \ " .align 2\n" \ + " .long 0b,2b\n" \ " .long 1b,2b\n" \ ".previous" \ : : "r" (val), "r" (port + ___IO_BASE)); \ diff --git a/include/asm-ppc/kgdb.h b/include/asm-ppc/kgdb.h index 1d3c927ce626..b617dac82969 100644 --- a/include/asm-ppc/kgdb.h +++ b/include/asm-ppc/kgdb.h @@ -31,7 +31,7 @@ extern void breakpoint(void); /* For taking exceptions * these are defined in traps.c */ -extern void (*debugger)(struct pt_regs *regs); +extern int (*debugger)(struct pt_regs *regs); extern int (*debugger_bpt)(struct pt_regs *regs); extern int (*debugger_sstep)(struct pt_regs *regs); extern int (*debugger_iabr_match)(struct pt_regs *regs); diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h index 75c0637acdc8..3e39827ed566 100644 --- a/include/asm-ppc/prom.h +++ b/include/asm-ppc/prom.h @@ -93,7 +93,7 @@ extern int device_is_compatible(struct device_node *device, const char *); extern int machine_is_compatible(const char *compat); extern unsigned char *get_property(struct device_node *node, const char *name, int *lenp); -extern void prom_add_property(struct device_node* np, struct property* prop); +extern int prom_add_property(struct device_node* np, struct property* prop); extern void prom_get_irq_senses(unsigned char *, int, int); extern int prom_n_addr_cells(struct device_node* np); extern int prom_n_size_cells(struct device_node* np); diff --git a/include/asm-ppc64/ide.h b/include/asm-ppc64/ide.h deleted file mode 100644 index 0aae1c590c0e..000000000000 --- a/include/asm-ppc64/ide.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/include/asm-ppc/ide.h - * - * Copyright (C) 1994-1996 Linus Torvalds & authors - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * This file contains the ppc64 architecture specific IDE code. - */ - -#ifndef __ASMPPC64_IDE_H -#define __ASMPPC64_IDE_H - -#ifdef __KERNEL__ - -#ifndef MAX_HWIFS -# define MAX_HWIFS 10 -#endif - -#define IDE_ARCH_OBSOLETE_INIT -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - -#endif /* __KERNEL__ */ - -#endif /* __ASMPPC64_IDE_H */ diff --git a/include/asm-ppc64/pci.h b/include/asm-ppc64/pci.h index 342e2d755550..fafdf885a3cc 100644 --- a/include/asm-ppc64/pci.h +++ b/include/asm-ppc64/pci.h @@ -162,6 +162,14 @@ pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus); extern struct pci_controller *init_phb_dynamic(struct device_node *dn); +extern struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn); + +extern void of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev); + +extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); + extern int pci_read_irq_line(struct pci_dev *dev); extern void pcibios_add_platform_entries(struct pci_dev *dev); diff --git a/include/asm-ppc64/ppcdebug.h b/include/asm-ppc64/ppcdebug.h deleted file mode 100644 index fd7f696065c4..000000000000 --- a/include/asm-ppc64/ppcdebug.h +++ /dev/null @@ -1,108 +0,0 @@ -#ifndef __PPCDEBUG_H -#define __PPCDEBUG_H -/******************************************************************** - * Author: Adam Litke, IBM Corp - * (c) 2001 - * - * This file contains definitions and macros for a runtime debugging - * system for ppc64 (This should also work on 32 bit with a few - * adjustments. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - ********************************************************************/ - -#include <linux/config.h> -#include <linux/types.h> -#include <asm/udbg.h> -#include <stdarg.h> - -#define PPCDBG_BITVAL(X) ((1UL)<<((unsigned long)(X))) - -/* Defined below are the bit positions of various debug flags in the - * ppc64_debug_switch variable. - * -- When adding new values, please enter them into trace names below -- - * - * Values 62 & 63 can be used to stress the hardware page table management - * code. They must be set statically, any attempt to change them dynamically - * would be a very bad idea. - */ -#define PPCDBG_MMINIT PPCDBG_BITVAL(0) -#define PPCDBG_MM PPCDBG_BITVAL(1) -#define PPCDBG_SYS32 PPCDBG_BITVAL(2) -#define PPCDBG_SYS32NI PPCDBG_BITVAL(3) -#define PPCDBG_SYS32X PPCDBG_BITVAL(4) -#define PPCDBG_SYS32M PPCDBG_BITVAL(5) -#define PPCDBG_SYS64 PPCDBG_BITVAL(6) -#define PPCDBG_SYS64NI PPCDBG_BITVAL(7) -#define PPCDBG_SYS64X PPCDBG_BITVAL(8) -#define PPCDBG_SIGNAL PPCDBG_BITVAL(9) -#define PPCDBG_SIGNALXMON PPCDBG_BITVAL(10) -#define PPCDBG_BINFMT32 PPCDBG_BITVAL(11) -#define PPCDBG_BINFMT64 PPCDBG_BITVAL(12) -#define PPCDBG_BINFMTXMON PPCDBG_BITVAL(13) -#define PPCDBG_BINFMT_32ADDR PPCDBG_BITVAL(14) -#define PPCDBG_ALIGNFIXUP PPCDBG_BITVAL(15) -#define PPCDBG_TCEINIT PPCDBG_BITVAL(16) -#define PPCDBG_TCE PPCDBG_BITVAL(17) -#define PPCDBG_PHBINIT PPCDBG_BITVAL(18) -#define PPCDBG_SMP PPCDBG_BITVAL(19) -#define PPCDBG_BOOT PPCDBG_BITVAL(20) -#define PPCDBG_BUSWALK PPCDBG_BITVAL(21) -#define PPCDBG_PROM PPCDBG_BITVAL(22) -#define PPCDBG_RTAS PPCDBG_BITVAL(23) -#define PPCDBG_HTABSTRESS PPCDBG_BITVAL(62) -#define PPCDBG_HTABSIZE PPCDBG_BITVAL(63) -#define PPCDBG_NONE (0UL) -#define PPCDBG_ALL (0xffffffffUL) - -/* The default initial value for the debug switch */ -#define PPC_DEBUG_DEFAULT 0 -/* #define PPC_DEBUG_DEFAULT PPCDBG_ALL */ - -#define PPCDBG_NUM_FLAGS 64 - -extern u64 ppc64_debug_switch; - -#ifdef WANT_PPCDBG_TAB -/* A table of debug switch names to allow name lookup in xmon - * (and whoever else wants it. - */ -char *trace_names[PPCDBG_NUM_FLAGS] = { - /* Known debug names */ - "mminit", "mm", - "syscall32", "syscall32_ni", "syscall32x", "syscall32m", - "syscall64", "syscall64_ni", "syscall64x", - "signal", "signal_xmon", - "binfmt32", "binfmt64", "binfmt_xmon", "binfmt_32addr", - "alignfixup", "tceinit", "tce", "phb_init", - "smp", "boot", "buswalk", "prom", - "rtas" -}; -#else -extern char *trace_names[64]; -#endif /* WANT_PPCDBG_TAB */ - -#ifdef CONFIG_PPCDBG -/* Macro to conditionally print debug based on debug_switch */ -#define PPCDBG(...) udbg_ppcdbg(__VA_ARGS__) - -/* Macro to conditionally call a debug routine based on debug_switch */ -#define PPCDBGCALL(FLAGS,FUNCTION) ifppcdebug(FLAGS) FUNCTION - -/* Macros to test for debug states */ -#define ifppcdebug(FLAGS) if (udbg_ifdebug(FLAGS)) -#define ppcdebugset(FLAGS) (udbg_ifdebug(FLAGS)) -#define PPCDBG_BINFMT (test_thread_flag(TIF_32BIT) ? PPCDBG_BINFMT32 : PPCDBG_BINFMT64) - -#else -#define PPCDBG(...) do {;} while (0) -#define PPCDBGCALL(FLAGS,FUNCTION) do {;} while (0) -#define ifppcdebug(...) if (0) -#define ppcdebugset(FLAGS) (0) -#endif /* CONFIG_PPCDBG */ - -#endif /*__PPCDEBUG_H */ diff --git a/include/asm-ppc64/prom.h b/include/asm-ppc64/prom.h index bdb47174ff0e..76bb0266d67c 100644 --- a/include/asm-ppc64/prom.h +++ b/include/asm-ppc64/prom.h @@ -213,6 +213,6 @@ extern int prom_n_addr_cells(struct device_node* np); extern int prom_n_size_cells(struct device_node* np); extern int prom_n_intr_cells(struct device_node* np); extern void prom_get_irq_senses(unsigned char *senses, int off, int max); -extern void prom_add_property(struct device_node* np, struct property* prop); +extern int prom_add_property(struct device_node* np, struct property* prop); #endif /* _PPC64_PROM_H */ diff --git a/include/asm-ppc64/udbg.h b/include/asm-ppc64/udbg.h index 8192fb8541cc..e3b927991851 100644 --- a/include/asm-ppc64/udbg.h +++ b/include/asm-ppc64/udbg.h @@ -23,9 +23,6 @@ extern int udbg_read(char *buf, int buflen); extern void register_early_udbg_console(void); extern void udbg_printf(const char *fmt, ...); -extern void udbg_ppcdbg(unsigned long flags, const char *fmt, ...); -extern unsigned long udbg_ifdebug(unsigned long flags); -extern void __init ppcdbg_initialize(void); extern void udbg_init_uart(void __iomem *comport, unsigned int speed); diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 0563581e3a02..65ceeaa30652 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -139,15 +139,12 @@ extern void proc_tty_unregister_driver(struct tty_driver *driver); /* * proc_devtree.c */ +#ifdef CONFIG_PROC_DEVICETREE struct device_node; +struct property; extern void proc_device_tree_init(void); -#ifdef CONFIG_PROC_DEVICETREE extern void proc_device_tree_add_node(struct device_node *, struct proc_dir_entry *); -#else /* !CONFIG_PROC_DEVICETREE */ -static inline void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *pde) -{ - return; -} +extern void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop); #endif /* CONFIG_PROC_DEVICETREE */ extern struct proc_dir_entry *proc_symlink(const char *, |