diff options
Diffstat (limited to 'include')
445 files changed, 11960 insertions, 7787 deletions
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h new file mode 100644 index 000000000000..03f14856bd09 --- /dev/null +++ b/include/acpi/acconfig.h @@ -0,0 +1,248 @@ +/****************************************************************************** + * + * Name: acconfig.h - Global configuration constants + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#ifndef _ACCONFIG_H +#define _ACCONFIG_H + +/****************************************************************************** + * + * Configuration options + * + *****************************************************************************/ + +/* + * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the + * ACPI subsystem. This includes the DEBUG_PRINT output + * statements. When disabled, all DEBUG_PRINT + * statements are compiled out. + * + * ACPI_APPLICATION - Use this switch if the subsystem is going to be run + * at the application level. + * + */ + +/* + * OS name, used for the _OS object. The _OS object is essentially obsolete, + * but there is a large base of ASL/AML code in existing machines that check + * for the string below. The use of this string usually guarantees that + * the ASL will execute down the most tested code path. Also, there is some + * code that will not execute the _OSI method unless _OS matches the string + * below. Therefore, change this string at your own risk. + */ +#define ACPI_OS_NAME "Microsoft Windows NT" + +/* Maximum objects in the various object caches */ + +#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */ +#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */ +#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */ +#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */ +#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */ + +/* + * Should the subsystem abort the loading of an ACPI table if the + * table checksum is incorrect? + */ +#define ACPI_CHECKSUM_ABORT FALSE + +/* + * Generate a version of ACPICA that only supports "reduced hardware" + * platforms (as defined in ACPI 5.0). Set to TRUE to generate a specialized + * version of ACPICA that ONLY supports the ACPI 5.0 "reduced hardware" + * model. In other words, no ACPI hardware is supported. + * + * If TRUE, this means no support for the following: + * PM Event and Control registers + * SCI interrupt (and handler) + * Fixed Events + * General Purpose Events (GPEs) + * Global Lock + * ACPI PM timer + * FACS table (Waking vectors and Global Lock) + */ +#define ACPI_REDUCED_HARDWARE FALSE + +/****************************************************************************** + * + * Subsystem Constants + * + *****************************************************************************/ + +/* Version of ACPI supported */ + +#define ACPI_CA_SUPPORT_LEVEL 5 + +/* Maximum count for a semaphore object */ + +#define ACPI_MAX_SEMAPHORE_COUNT 256 + +/* Maximum object reference count (detects object deletion issues) */ + +#define ACPI_MAX_REFERENCE_COUNT 0x1000 + +/* Default page size for use in mapping memory for operation regions */ + +#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ + +/* owner_id tracking. 8 entries allows for 255 owner_ids */ + +#define ACPI_NUM_OWNERID_MASKS 8 + +/* Size of the root table array is increased by this increment */ + +#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4 + +/* Maximum number of While() loop iterations before forced abort */ + +#define ACPI_MAX_LOOP_ITERATIONS 0xFFFF + +/* Maximum sleep allowed via Sleep() operator */ + +#define ACPI_MAX_SLEEP 2000 /* Two seconds */ + +/* Address Range lists are per-space_id (Memory and I/O only) */ + +#define ACPI_ADDRESS_RANGE_MAX 2 + +/****************************************************************************** + * + * ACPI Specification constants (Do not change unless the specification changes) + * + *****************************************************************************/ + +/* Number of distinct GPE register blocks and register width */ + +#define ACPI_MAX_GPE_BLOCKS 2 +#define ACPI_GPE_REGISTER_WIDTH 8 + +/* Method info (in WALK_STATE), containing local variables and argumetns */ + +#define ACPI_METHOD_NUM_LOCALS 8 +#define ACPI_METHOD_MAX_LOCAL 7 + +#define ACPI_METHOD_NUM_ARGS 7 +#define ACPI_METHOD_MAX_ARG 6 + +/* Length of _HID, _UID, _CID, and UUID values */ + +#define ACPI_DEVICE_ID_LENGTH 0x09 +#define ACPI_MAX_CID_LENGTH 48 +#define ACPI_UUID_LENGTH 16 + +/* + * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG + */ +#define ACPI_OBJ_NUM_OPERANDS 8 +#define ACPI_OBJ_MAX_OPERAND 7 + +/* Number of elements in the Result Stack frame, can be an arbitrary value */ + +#define ACPI_RESULTS_FRAME_OBJ_NUM 8 + +/* + * Maximal number of elements the Result Stack can contain, + * it may be an arbitray value not exceeding the types of + * result_size and result_count (now u8). + */ +#define ACPI_RESULTS_OBJ_NUM_MAX 255 + +/* Names within the namespace are 4 bytes long */ + +#define ACPI_NAME_SIZE 4 +#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ +#define ACPI_PATH_SEPARATOR '.' + +/* Sizes for ACPI table headers */ + +#define ACPI_OEM_ID_SIZE 6 +#define ACPI_OEM_TABLE_ID_SIZE 8 + +/* Constants used in searching for the RSDP in low memory */ + +#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */ +#define ACPI_EBDA_PTR_LENGTH 2 +#define ACPI_EBDA_WINDOW_SIZE 1024 +#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */ +#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000 +#define ACPI_RSDP_SCAN_STEP 16 + +/* Operation regions */ + +#define ACPI_USER_REGION_BEGIN 0x80 + +/* Maximum space_ids for Operation Regions */ + +#define ACPI_MAX_ADDRESS_SPACE 255 + +/* Array sizes. Used for range checking also */ + +#define ACPI_MAX_MATCH_OPCODE 5 + +/* RSDP checksums */ + +#define ACPI_RSDP_CHECKSUM_LENGTH 20 +#define ACPI_RSDP_XCHECKSUM_LENGTH 36 + +/* SMBus, GSBus and IPMI bidirectional buffer size */ + +#define ACPI_SMBUS_BUFFER_SIZE 34 +#define ACPI_GSBUS_BUFFER_SIZE 34 +#define ACPI_IPMI_BUFFER_SIZE 66 + +/* _sx_d and _sx_w control methods */ + +#define ACPI_NUM_sx_d_METHODS 4 +#define ACPI_NUM_sx_w_METHODS 5 + +/****************************************************************************** + * + * ACPI AML Debugger + * + *****************************************************************************/ + +#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */ + +#define ACPI_DEBUGGER_COMMAND_PROMPT '-' +#define ACPI_DEBUGGER_EXECUTE_PROMPT '%' + +#endif /* _ACCONFIG_H */ diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 5b6c391efc8e..92d6e1d701ff 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -57,6 +57,7 @@ #define ACPI_SUCCESS(a) (!(a)) #define ACPI_FAILURE(a) (a) +#define ACPI_SKIP(a) (a == AE_CTRL_SKIP) #define AE_OK (acpi_status) 0x0000 /* @@ -89,8 +90,9 @@ #define AE_SAME_HANDLER (acpi_status) (0x0019 | AE_CODE_ENVIRONMENTAL) #define AE_NO_HANDLER (acpi_status) (0x001A | AE_CODE_ENVIRONMENTAL) #define AE_OWNER_ID_LIMIT (acpi_status) (0x001B | AE_CODE_ENVIRONMENTAL) +#define AE_NOT_CONFIGURED (acpi_status) (0x001C | AE_CODE_ENVIRONMENTAL) -#define AE_CODE_ENV_MAX 0x001B +#define AE_CODE_ENV_MAX 0x001C /* * Programmer exceptions @@ -213,7 +215,8 @@ char const *acpi_gbl_exception_names_env[] = { "AE_ABORT_METHOD", "AE_SAME_HANDLER", "AE_NO_HANDLER", - "AE_OWNER_ID_LIMIT" + "AE_OWNER_ID_LIMIT", + "AE_NOT_CONFIGURED" }; char const *acpi_gbl_exception_names_pgm[] = { diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h index 5b5af0d30a97..38f508816e4a 100644 --- a/include/acpi/acnames.h +++ b/include/acpi/acnames.h @@ -46,6 +46,7 @@ /* Method names - these methods can appear anywhere in the namespace */ +#define METHOD_NAME__SB_ "_SB_" #define METHOD_NAME__HID "_HID" #define METHOD_NAME__CID "_CID" #define METHOD_NAME__UID "_UID" @@ -64,11 +65,11 @@ /* Method names - these methods must appear at the namespace root */ -#define METHOD_NAME__BFS "\\_BFS" -#define METHOD_NAME__GTS "\\_GTS" -#define METHOD_NAME__PTS "\\_PTS" -#define METHOD_NAME__SST "\\_SI._SST" -#define METHOD_NAME__WAK "\\_WAK" +#define METHOD_PATHNAME__BFS "\\_BFS" +#define METHOD_PATHNAME__GTS "\\_GTS" +#define METHOD_PATHNAME__PTS "\\_PTS" +#define METHOD_PATHNAME__SST "\\_SI._SST" +#define METHOD_PATHNAME__WAK "\\_WAK" /* Definitions of the predefined namespace names */ @@ -79,6 +80,5 @@ #define ACPI_PREFIX_LOWER (u32) 0x69706361 /* "acpi" */ #define ACPI_NS_ROOT_PATH "\\" -#define ACPI_NS_SYSTEM_BUS "_SB_" #endif /* __ACNAMES_H__ */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 6cd5b6403a7b..f1c8ca60e824 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -323,6 +323,8 @@ int acpi_bus_set_power(acpi_handle handle, int state); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); bool acpi_bus_can_wakeup(acpi_handle handle); +int acpi_power_resource_register_device(struct device *dev, acpi_handle handle); +void acpi_power_resource_unregister_device(struct device *dev, acpi_handle handle); #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data); @@ -392,8 +394,13 @@ static inline int acpi_pm_device_sleep_state(struct device *d, int *p) #endif #ifdef CONFIG_PM_SLEEP +int acpi_pm_device_run_wake(struct device *, bool); int acpi_pm_device_sleep_wake(struct device *, bool); #else +static inline int acpi_pm_device_run_wake(struct device *dev, bool enable) +{ + return -ENODEV; +} static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable) { return -ENODEV; diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 7c9aebe8a7aa..21a5548c6686 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -95,6 +95,11 @@ acpi_status acpi_os_table_override(struct acpi_table_header *existing_table, struct acpi_table_header **new_table); +acpi_status +acpi_os_physical_table_override(struct acpi_table_header *existing_table, + acpi_physical_address * new_address, + u32 *new_table_length); + /* * Spinlock primitives */ @@ -217,14 +222,10 @@ acpi_status acpi_os_write_port(acpi_io_address address, u32 value, u32 width); * Platform and hardware-independent physical memory interfaces */ acpi_status -acpi_os_read_memory(acpi_physical_address address, u32 * value, u32 width); -acpi_status -acpi_os_read_memory64(acpi_physical_address address, u64 *value, u32 width); +acpi_os_read_memory(acpi_physical_address address, u64 *value, u32 width); acpi_status -acpi_os_write_memory(acpi_physical_address address, u32 value, u32 width); -acpi_status -acpi_os_write_memory64(acpi_physical_address address, u64 value, u32 width); +acpi_os_write_memory(acpi_physical_address address, u64 value, u32 width); /* * Platform and hardware-independent PCI configuration space access diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index a28da35ba45e..982110134672 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -47,8 +47,9 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20120111 +#define ACPI_CA_VERSION 0x20120320 +#include "acconfig.h" #include "actypes.h" #include "actbl.h" @@ -71,6 +72,33 @@ extern u8 acpi_gbl_copy_dsdt_locally; extern u8 acpi_gbl_truncate_io_addresses; extern u8 acpi_gbl_disable_auto_repair; +/* + * Hardware-reduced prototypes. All interfaces that use these macros will + * be configured out of the ACPICA build if the ACPI_REDUCED_HARDWARE flag + * is set to TRUE. + */ +#if (!ACPI_REDUCED_HARDWARE) +#define ACPI_HW_DEPENDENT_RETURN_STATUS(prototype) \ + prototype; + +#define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \ + prototype; + +#define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \ + prototype; + +#else +#define ACPI_HW_DEPENDENT_RETURN_STATUS(prototype) \ + static ACPI_INLINE prototype {return(AE_NOT_CONFIGURED);} + +#define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \ + static ACPI_INLINE prototype {return(AE_OK);} + +#define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \ + static ACPI_INLINE prototype {} + +#endif /* !ACPI_REDUCED_HARDWARE */ + extern u32 acpi_current_gpe_count; extern struct acpi_table_fadt acpi_gbl_FADT; extern u8 acpi_gbl_system_awake_and_running; @@ -96,9 +124,8 @@ acpi_status acpi_terminate(void); acpi_status acpi_subsystem_status(void); #endif -acpi_status acpi_enable(void); - -acpi_status acpi_disable(void); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable(void)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable(void)) #ifdef ACPI_FUTURE_USAGE acpi_status acpi_get_system_info(struct acpi_buffer *ret_buffer); @@ -235,17 +262,34 @@ acpi_status acpi_get_parent(acpi_handle object, acpi_handle * out_handle); acpi_status acpi_install_initialization_handler(acpi_init_handler handler, u32 function); -acpi_status -acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, - void *context); - -acpi_status -acpi_install_fixed_event_handler(u32 acpi_event, - acpi_event_handler handler, void *context); - -acpi_status -acpi_remove_fixed_event_handler(u32 acpi_event, acpi_event_handler handler); - +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_install_global_event_handler + (ACPI_GBL_EVENT_HANDLER handler, void *context)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_install_fixed_event_handler(u32 + acpi_event, + acpi_event_handler + handler, + void + *context)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_remove_fixed_event_handler(u32 acpi_event, + acpi_event_handler + handler)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_install_gpe_handler(acpi_handle + gpe_device, + u32 gpe_number, + u32 type, + acpi_gpe_handler + address, + void *context)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_remove_gpe_handler(acpi_handle gpe_device, + u32 gpe_number, + acpi_gpe_handler + address)) acpi_status acpi_install_notify_handler(acpi_handle device, u32 handler_type, @@ -266,15 +310,6 @@ acpi_remove_address_space_handler(acpi_handle device, acpi_adr_space_type space_id, acpi_adr_space_handler handler); -acpi_status -acpi_install_gpe_handler(acpi_handle gpe_device, - u32 gpe_number, - u32 type, acpi_gpe_handler address, void *context); - -acpi_status -acpi_remove_gpe_handler(acpi_handle gpe_device, - u32 gpe_number, acpi_gpe_handler address); - #ifdef ACPI_FUTURE_USAGE acpi_status acpi_install_exception_handler(acpi_exception_handler handler); #endif @@ -284,9 +319,11 @@ acpi_status acpi_install_interface_handler(acpi_interface_handler handler); /* * Global Lock interfaces */ -acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle); - -acpi_status acpi_release_global_lock(u32 handle); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_acquire_global_lock(u16 timeout, + u32 *handle)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_release_global_lock(u32 handle)) /* * Interfaces to AML mutex objects @@ -299,47 +336,75 @@ acpi_status acpi_release_mutex(acpi_handle handle, acpi_string pathname); /* * Fixed Event interfaces */ -acpi_status acpi_enable_event(u32 event, u32 flags); - -acpi_status acpi_disable_event(u32 event, u32 flags); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_enable_event(u32 event, u32 flags)) -acpi_status acpi_clear_event(u32 event); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_disable_event(u32 event, u32 flags)) -acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_clear_event(u32 event)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_event_status(u32 event, + acpi_event_status + *event_status)) /* * General Purpose Event (GPE) Interfaces */ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number); - -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number); - -acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number); - -acpi_status -acpi_setup_gpe_for_wake(acpi_handle parent_device, - acpi_handle gpe_device, u32 gpe_number); - -acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action); - -acpi_status -acpi_get_gpe_status(acpi_handle gpe_device, - u32 gpe_number, acpi_event_status *event_status); - -acpi_status acpi_disable_all_gpes(void); - -acpi_status acpi_enable_all_runtime_gpes(void); - -acpi_status acpi_get_gpe_device(u32 gpe_index, acpi_handle *gpe_device); - -acpi_status -acpi_install_gpe_block(acpi_handle gpe_device, - struct acpi_generic_address *gpe_block_address, - u32 register_count, u32 interrupt_number); - -acpi_status acpi_remove_gpe_block(acpi_handle gpe_device); - -acpi_status acpi_update_all_gpes(void); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_update_all_gpes(void)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_enable_gpe(acpi_handle gpe_device, + u32 gpe_number)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_disable_gpe(acpi_handle gpe_device, + u32 gpe_number)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_clear_gpe(acpi_handle gpe_device, + u32 gpe_number)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_set_gpe(acpi_handle gpe_device, + u32 gpe_number, u8 action)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_finish_gpe(acpi_handle gpe_device, + u32 gpe_number)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_setup_gpe_for_wake(acpi_handle + parent_device, + acpi_handle gpe_device, + u32 gpe_number)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_set_gpe_wake_mask(acpi_handle gpe_device, + u32 gpe_number, + u8 action)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_gpe_status(acpi_handle gpe_device, + u32 gpe_number, + acpi_event_status + *event_status)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable_all_gpes(void)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable_all_runtime_gpes(void)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_gpe_device(u32 gpe_index, + acpi_handle * gpe_device)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_install_gpe_block(acpi_handle gpe_device, + struct + acpi_generic_address + *gpe_block_address, + u32 register_count, + u32 interrupt_number)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_remove_gpe_block(acpi_handle gpe_device)) /* * Resource interfaces @@ -391,34 +456,60 @@ acpi_buffer_to_resource(u8 *aml_buffer, */ acpi_status acpi_reset(void); -acpi_status acpi_read_bit_register(u32 register_id, u32 *return_value); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_read_bit_register(u32 register_id, + u32 *return_value)) -acpi_status acpi_write_bit_register(u32 register_id, u32 value); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_write_bit_register(u32 register_id, + u32 value)) -acpi_status acpi_set_firmware_waking_vector(u32 physical_address); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_set_firmware_waking_vector(u32 + physical_address)) #if ACPI_MACHINE_WIDTH == 64 -acpi_status acpi_set_firmware_waking_vector64(u64 physical_address); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_set_firmware_waking_vector64(u64 + physical_address)) #endif acpi_status acpi_read(u64 *value, struct acpi_generic_address *reg); acpi_status acpi_write(u64 value, struct acpi_generic_address *reg); +/* + * Sleep/Wake interfaces + */ acpi_status acpi_get_sleep_type_data(u8 sleep_state, u8 * slp_typ_a, u8 * slp_typ_b); acpi_status acpi_enter_sleep_state_prep(u8 sleep_state); -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state); +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags); -acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)) -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state); +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags); acpi_status acpi_leave_sleep_state(u8 sleep_state); /* + * ACPI Timer interfaces + */ +#ifdef ACPI_FUTURE_USAGE +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_timer_resolution(u32 *resolution)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_get_timer(u32 *ticks)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_timer_duration(u32 start_ticks, + u32 end_ticks, + u32 *time_elapsed)) +#endif /* ACPI_FUTURE_USAGE */ + +/* * Error/Warning output */ void ACPI_INTERNAL_VAR_XFACE diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index 8e1b92f6f650..8dea54665dcf 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -309,6 +309,13 @@ enum acpi_prefered_pm_profiles { PM_TABLET = 8 }; +/* Values for sleep_status and sleep_control registers (V5 FADT) */ + +#define ACPI_X_WAKE_STATUS 0x80 +#define ACPI_X_SLEEP_TYPE_MASK 0x1C +#define ACPI_X_SLEEP_TYPE_POSITION 0x02 +#define ACPI_X_SLEEP_ENABLE 0x20 + /* Reset to default packing */ #pragma pack() diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index d5dee7ce9474..eba66043cf1b 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -518,6 +518,13 @@ typedef u64 acpi_integer; #define ACPI_SLEEP_TYPE_INVALID 0xFF /* + * Sleep/Wake flags + */ +#define ACPI_NO_OPTIONAL_METHODS 0x00 /* Do not execute any optional methods */ +#define ACPI_EXECUTE_GTS 0x01 /* For enter sleep interface */ +#define ACPI_EXECUTE_BFS 0x02 /* For leave sleep prep interface */ + +/* * Standard notify values */ #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00 @@ -532,8 +539,9 @@ typedef u64 acpi_integer; #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09 #define ACPI_NOTIFY_RESERVED (u8) 0x0A #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B +#define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C -#define ACPI_NOTIFY_MAX 0x0B +#define ACPI_NOTIFY_MAX 0x0C /* * Types associated with ACPI names and objects. The first group of @@ -698,7 +706,8 @@ typedef u32 acpi_event_status; #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 -#define ACPI_MAX_SYS_NOTIFY 0x7f +#define ACPI_MAX_SYS_NOTIFY 0x7F +#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF /* Address Space (Operation Region) Types */ @@ -786,6 +795,15 @@ typedef u8 acpi_adr_space_type; #define ACPI_ENABLE_EVENT 1 #define ACPI_DISABLE_EVENT 0 +/* Sleep function dispatch */ + +typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state, u8 flags); + +struct acpi_sleep_functions { + ACPI_SLEEP_FUNCTION legacy_function; + ACPI_SLEEP_FUNCTION extended_function; +}; + /* * External ACPI object definition */ diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index f4b2effe0333..6fbc4cab5834 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -57,7 +57,6 @@ #include <linux/kernel.h> #include <linux/ctype.h> #include <linux/sched.h> -#include <asm/system.h> #include <linux/atomic.h> #include <asm/div64.h> #include <asm/acpi.h> diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h index e37963c1df4d..1ced6413ea03 100644 --- a/include/asm-generic/atomic.h +++ b/include/asm-generic/atomic.h @@ -15,6 +15,8 @@ #ifndef __ASM_GENERIC_ATOMIC_H #define __ASM_GENERIC_ATOMIC_H +#include <asm/cmpxchg.h> + #ifdef CONFIG_SMP /* Force people to define core atomics */ # if !defined(atomic_add_return) || !defined(atomic_sub_return) || \ @@ -52,7 +54,6 @@ #define atomic_set(v, i) (((v)->counter) = (i)) #include <linux/irqflags.h> -#include <asm/system.h> /** * atomic_add_return - add integer to atomic variable diff --git a/include/asm-generic/barrier.h b/include/asm-generic/barrier.h new file mode 100644 index 000000000000..639d7a4d033b --- /dev/null +++ b/include/asm-generic/barrier.h @@ -0,0 +1,50 @@ +/* Generic barrier definitions, based on MN10300 definitions. + * + * It should be possible to use these on really simple architectures, + * but it serves more as a starting point for new ports. + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef __ASM_GENERIC_BARRIER_H +#define __ASM_GENERIC_BARRIER_H + +#ifndef __ASSEMBLY__ + +#define nop() asm volatile ("nop") + +/* + * Force strict CPU ordering. + * And yes, this is required on UP too when we're talking + * to devices. + * + * This implementation only contains a compiler barrier. + */ + +#define mb() asm volatile ("": : :"memory") +#define rmb() mb() +#define wmb() asm volatile ("": : :"memory") + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#endif + +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +#define read_barrier_depends() do {} while (0) +#define smp_read_barrier_depends() do {} while (0) + +#endif /* !__ASSEMBLY__ */ +#endif /* __ASM_GENERIC_BARRIER_H */ diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h index ecc44a8e2b44..9ae6c34dc191 100644 --- a/include/asm-generic/bitops/atomic.h +++ b/include/asm-generic/bitops/atomic.h @@ -2,7 +2,7 @@ #define _ASM_GENERIC_BITOPS_ATOMIC_H_ #include <asm/types.h> -#include <asm/system.h> +#include <linux/irqflags.h> #ifdef CONFIG_SMP #include <asm/spinlock.h> diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index 84458b0c38d1..2520a6e241dc 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -134,7 +134,7 @@ extern void warn_slowpath_null(const char *file, const int line); #endif #define WARN_ON_ONCE(condition) ({ \ - static bool __warned; \ + static bool __section(.data.unlikely) __warned; \ int __ret_warn_once = !!(condition); \ \ if (unlikely(__ret_warn_once)) \ @@ -144,7 +144,7 @@ extern void warn_slowpath_null(const char *file, const int line); }) #define WARN_ONCE(condition, format...) ({ \ - static bool __warned; \ + static bool __section(.data.unlikely) __warned; \ int __ret_warn_once = !!(condition); \ \ if (unlikely(__ret_warn_once)) \ @@ -154,7 +154,7 @@ extern void warn_slowpath_null(const char *file, const int line); }) #define WARN_TAINT_ONCE(condition, taint, format...) ({ \ - static bool __warned; \ + static bool __section(.data.unlikely) __warned; \ int __ret_warn_once = !!(condition); \ \ if (unlikely(__ret_warn_once)) \ diff --git a/include/asm-generic/cmpxchg.h b/include/asm-generic/cmpxchg.h index 213ac6e8fe39..14883026015d 100644 --- a/include/asm-generic/cmpxchg.h +++ b/include/asm-generic/cmpxchg.h @@ -1,22 +1,98 @@ +/* + * Generic UP xchg and cmpxchg using interrupt disablement. Does not + * support SMP. + */ + #ifndef __ASM_GENERIC_CMPXCHG_H #define __ASM_GENERIC_CMPXCHG_H -/* - * Generic cmpxchg - * - * Uses the local cmpxchg. Does not support SMP. - */ #ifdef CONFIG_SMP #error "Cannot use generic cmpxchg on SMP" #endif +#include <linux/types.h> +#include <linux/irqflags.h> + +#ifndef xchg + +/* + * This function doesn't exist, so you'll get a linker error if + * something tries to do an invalidly-sized xchg(). + */ +extern void __xchg_called_with_bad_pointer(void); + +static inline +unsigned long __xchg(unsigned long x, volatile void *ptr, int size) +{ + unsigned long ret, flags; + + switch (size) { + case 1: +#ifdef __xchg_u8 + return __xchg_u8(x, ptr); +#else + local_irq_save(flags); + ret = *(volatile u8 *)ptr; + *(volatile u8 *)ptr = x; + local_irq_restore(flags); + return ret; +#endif /* __xchg_u8 */ + + case 2: +#ifdef __xchg_u16 + return __xchg_u16(x, ptr); +#else + local_irq_save(flags); + ret = *(volatile u16 *)ptr; + *(volatile u16 *)ptr = x; + local_irq_restore(flags); + return ret; +#endif /* __xchg_u16 */ + + case 4: +#ifdef __xchg_u32 + return __xchg_u32(x, ptr); +#else + local_irq_save(flags); + ret = *(volatile u32 *)ptr; + *(volatile u32 *)ptr = x; + local_irq_restore(flags); + return ret; +#endif /* __xchg_u32 */ + +#ifdef CONFIG_64BIT + case 8: +#ifdef __xchg_u64 + return __xchg_u64(x, ptr); +#else + local_irq_save(flags); + ret = *(volatile u64 *)ptr; + *(volatile u64 *)ptr = x; + local_irq_restore(flags); + return ret; +#endif /* __xchg_u64 */ +#endif /* CONFIG_64BIT */ + + default: + __xchg_called_with_bad_pointer(); + return x; + } +} + +#define xchg(ptr, x) \ + ((__typeof__(*(ptr))) __xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) + +#endif /* xchg */ + /* * Atomic compare and exchange. * * Do not define __HAVE_ARCH_CMPXCHG because we want to use it to check whether * a cmpxchg primitive faster than repeated local irq save/restore exists. */ +#include <asm-generic/cmpxchg-local.h> + #define cmpxchg(ptr, o, n) cmpxchg_local((ptr), (o), (n)) #define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n)) -#endif +#endif /* __ASM_GENERIC_CMPXCHG_H */ diff --git a/include/asm-generic/dma-mapping-common.h b/include/asm-generic/dma-mapping-common.h index 9fa3f96e38cf..2e248d8924dc 100644 --- a/include/asm-generic/dma-mapping-common.h +++ b/include/asm-generic/dma-mapping-common.h @@ -2,6 +2,7 @@ #define _ASM_GENERIC_DMA_MAPPING_H #include <linux/kmemcheck.h> +#include <linux/bug.h> #include <linux/scatterlist.h> #include <linux/dma-debug.h> #include <linux/dma-attrs.h> diff --git a/include/asm-generic/exec.h b/include/asm-generic/exec.h new file mode 100644 index 000000000000..567766b0074a --- /dev/null +++ b/include/asm-generic/exec.h @@ -0,0 +1,19 @@ +/* Generic process execution definitions, based on MN10300 definitions. + * + * It should be possible to use these on really simple architectures, + * but it serves more as a starting point for new ports. + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef __ASM_GENERIC_EXEC_H +#define __ASM_GENERIC_EXEC_H + +#define arch_align_stack(x) (x) + +#endif /* __ASM_GENERIC_EXEC_H */ diff --git a/include/asm-generic/getorder.h b/include/asm-generic/getorder.h index 67e7245dc9b3..65e4468ac53d 100644 --- a/include/asm-generic/getorder.h +++ b/include/asm-generic/getorder.h @@ -4,21 +4,58 @@ #ifndef __ASSEMBLY__ #include <linux/compiler.h> +#include <linux/log2.h> -/* Pure 2^n version of get_order */ -static inline __attribute_const__ int get_order(unsigned long size) +/* + * Runtime evaluation of get_order() + */ +static inline __attribute_const__ +int __get_order(unsigned long size) { int order; - size = (size - 1) >> (PAGE_SHIFT - 1); - order = -1; - do { - size >>= 1; - order++; - } while (size); + size--; + size >>= PAGE_SHIFT; +#if BITS_PER_LONG == 32 + order = fls(size); +#else + order = fls64(size); +#endif return order; } +/** + * get_order - Determine the allocation order of a memory size + * @size: The size for which to get the order + * + * Determine the allocation order of a particular sized block of memory. This + * is on a logarithmic scale, where: + * + * 0 -> 2^0 * PAGE_SIZE and below + * 1 -> 2^1 * PAGE_SIZE to 2^0 * PAGE_SIZE + 1 + * 2 -> 2^2 * PAGE_SIZE to 2^1 * PAGE_SIZE + 1 + * 3 -> 2^3 * PAGE_SIZE to 2^2 * PAGE_SIZE + 1 + * 4 -> 2^4 * PAGE_SIZE to 2^3 * PAGE_SIZE + 1 + * ... + * + * The order returned is used to find the smallest allocation granule required + * to hold an object of the specified size. + * + * The result is undefined if the size is 0. + * + * This function may be used to initialise variables with compile time + * evaluations of constants. + */ +#define get_order(n) \ +( \ + __builtin_constant_p(n) ? ( \ + ((n) == 0UL) ? BITS_PER_LONG - PAGE_SHIFT : \ + (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ + ilog2((n) - 1) - PAGE_SHIFT + 1) \ + ) : \ + __get_order(n) \ +) + #endif /* __ASSEMBLY__ */ #endif /* __ASM_GENERIC_GETORDER_H */ diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 1ff4e221cb4d..5f52690c3c8f 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -142,9 +142,9 @@ extern int __must_check gpiochip_reserve(int start, int ngpio); /* add/remove chips */ extern int gpiochip_add(struct gpio_chip *chip); extern int __must_check gpiochip_remove(struct gpio_chip *chip); -extern struct gpio_chip *gpiochip_find(void *data, +extern struct gpio_chip *gpiochip_find(const void *data, int (*match)(struct gpio_chip *chip, - void *data)); + const void *data)); /* Always use the library code for GPIO management calls, diff --git a/include/asm-generic/mman-common.h b/include/asm-generic/mman-common.h index 787abbb6d867..d030d2c2647a 100644 --- a/include/asm-generic/mman-common.h +++ b/include/asm-generic/mman-common.h @@ -48,6 +48,10 @@ #define MADV_HUGEPAGE 14 /* Worth backing with hugepages */ #define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages */ +#define MADV_DONTDUMP 16 /* Explicity exclude from the core dump, + overrides the coredump filter bits */ +#define MADV_DODUMP 17 /* Clear the MADV_NODUMP flag */ + /* compatibility flags */ #define MAP_FILE 0 diff --git a/include/asm-generic/pci-bridge.h b/include/asm-generic/pci-bridge.h index 4a5aca2a2c94..a5b5d5a89a4f 100644 --- a/include/asm-generic/pci-bridge.h +++ b/include/asm-generic/pci-bridge.h @@ -45,6 +45,11 @@ static inline void pci_add_flags(int flags) pci_flags |= flags; } +static inline void pci_clear_flags(int flags) +{ + pci_flags &= ~flags; +} + static inline int pci_has_flag(int flag) { return pci_flags & flag; @@ -52,6 +57,7 @@ static inline int pci_has_flag(int flag) #else static inline void pci_set_flags(int flags) { } static inline void pci_add_flags(int flags) { } +static inline void pci_clear_flags(int flags) { } static inline int pci_has_flag(int flag) { return 0; diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h index 26373cff4546..e80a0495e5b0 100644 --- a/include/asm-generic/pci.h +++ b/include/asm-generic/pci.h @@ -6,30 +6,6 @@ #ifndef _ASM_GENERIC_PCI_H #define _ASM_GENERIC_PCI_H -/** - * pcibios_resource_to_bus - convert resource to PCI bus address - * @dev: device which owns this resource - * @region: converted bus-centric region (start,end) - * @res: resource to convert - * - * Convert a resource to a PCI device bus address or bus window. - */ -static inline void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - region->start = res->start; - region->end = res->end; -} - -static inline void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - res->start = region->start; - res->end = region->end; -} - static inline struct resource * pcibios_select_root(struct pci_dev *pdev, struct resource *res) { diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 76bff2bff15e..125c54e98517 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -5,6 +5,7 @@ #ifdef CONFIG_MMU #include <linux/mm_types.h> +#include <linux/bug.h> #ifndef __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS extern int ptep_set_access_flags(struct vm_area_struct *vma, @@ -425,6 +426,8 @@ extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn, unsigned long size); #endif +#ifdef CONFIG_MMU + #ifndef CONFIG_TRANSPARENT_HUGEPAGE static inline int pmd_trans_huge(pmd_t pmd) { @@ -441,7 +444,66 @@ static inline int pmd_write(pmd_t pmd) return 0; } #endif /* __HAVE_ARCH_PMD_WRITE */ +#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ + +/* + * This function is meant to be used by sites walking pagetables with + * the mmap_sem hold in read mode to protect against MADV_DONTNEED and + * transhuge page faults. MADV_DONTNEED can convert a transhuge pmd + * into a null pmd and the transhuge page fault can convert a null pmd + * into an hugepmd or into a regular pmd (if the hugepage allocation + * fails). While holding the mmap_sem in read mode the pmd becomes + * stable and stops changing under us only if it's not null and not a + * transhuge pmd. When those races occurs and this function makes a + * difference vs the standard pmd_none_or_clear_bad, the result is + * undefined so behaving like if the pmd was none is safe (because it + * can return none anyway). The compiler level barrier() is critically + * important to compute the two checks atomically on the same pmdval. + */ +static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) +{ + /* depend on compiler for an atomic pmd read */ + pmd_t pmdval = *pmd; + /* + * The barrier will stabilize the pmdval in a register or on + * the stack so that it will stop changing under the code. + */ +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + barrier(); +#endif + if (pmd_none(pmdval)) + return 1; + if (unlikely(pmd_bad(pmdval))) { + if (!pmd_trans_huge(pmdval)) + pmd_clear_bad(pmd); + return 1; + } + return 0; +} + +/* + * This is a noop if Transparent Hugepage Support is not built into + * the kernel. Otherwise it is equivalent to + * pmd_none_or_trans_huge_or_clear_bad(), and shall only be called in + * places that already verified the pmd is not none and they want to + * walk ptes while holding the mmap sem in read mode (write mode don't + * need this). If THP is not enabled, the pmd can't go away under the + * code even if MADV_DONTNEED runs, but if THP is enabled we need to + * run a pmd_trans_unstable before walking the ptes after + * split_huge_page_pmd returns (because it may have run when the pmd + * become null, but then a page fault can map in a THP and not a + * regular page). + */ +static inline int pmd_trans_unstable(pmd_t *pmd) +{ +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + return pmd_none_or_trans_huge_or_clear_bad(pmd); +#else + return 0; #endif +} + +#endif /* CONFIG_MMU */ #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-generic/posix_types.h b/include/asm-generic/posix_types.h index 3dab00860e71..91d44bd4dde3 100644 --- a/include/asm-generic/posix_types.h +++ b/include/asm-generic/posix_types.h @@ -10,8 +10,13 @@ * architectures, so that you can override them. */ +#ifndef __kernel_long_t +typedef long __kernel_long_t; +typedef unsigned long __kernel_ulong_t; +#endif + #ifndef __kernel_ino_t -typedef unsigned long __kernel_ino_t; +typedef __kernel_ulong_t __kernel_ino_t; #endif #ifndef __kernel_mode_t @@ -19,7 +24,7 @@ typedef unsigned int __kernel_mode_t; #endif #ifndef __kernel_nlink_t -typedef unsigned long __kernel_nlink_t; +typedef __kernel_ulong_t __kernel_nlink_t; #endif #ifndef __kernel_pid_t @@ -36,7 +41,7 @@ typedef unsigned int __kernel_gid_t; #endif #ifndef __kernel_suseconds_t -typedef long __kernel_suseconds_t; +typedef __kernel_long_t __kernel_suseconds_t; #endif #ifndef __kernel_daddr_t @@ -44,8 +49,8 @@ typedef int __kernel_daddr_t; #endif #ifndef __kernel_uid32_t -typedef __kernel_uid_t __kernel_uid32_t; -typedef __kernel_gid_t __kernel_gid32_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; #endif #ifndef __kernel_old_uid_t @@ -67,99 +72,29 @@ typedef unsigned int __kernel_size_t; typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; #else -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef long __kernel_ptrdiff_t; +typedef __kernel_ulong_t __kernel_size_t; +typedef __kernel_long_t __kernel_ssize_t; +typedef __kernel_long_t __kernel_ptrdiff_t; #endif #endif +#ifndef __kernel_fsid_t +typedef struct { + int val[2]; +} __kernel_fsid_t; +#endif + /* * anything below here should be completely generic */ -typedef long __kernel_off_t; +typedef __kernel_long_t __kernel_off_t; typedef long long __kernel_loff_t; -typedef long __kernel_time_t; -typedef long __kernel_clock_t; +typedef __kernel_long_t __kernel_time_t; +typedef __kernel_long_t __kernel_clock_t; typedef int __kernel_timer_t; typedef int __kernel_clockid_t; typedef char * __kernel_caddr_t; typedef unsigned short __kernel_uid16_t; typedef unsigned short __kernel_gid16_t; -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#ifdef __KERNEL__ - -#undef __FD_SET -static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - -#undef __FD_ISSET -static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static inline void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* __KERNEL__ */ - #endif /* __ASM_GENERIC_POSIX_TYPES_H */ diff --git a/include/asm-generic/switch_to.h b/include/asm-generic/switch_to.h new file mode 100644 index 000000000000..052c4ac04fd5 --- /dev/null +++ b/include/asm-generic/switch_to.h @@ -0,0 +1,30 @@ +/* Generic task switch macro wrapper, based on MN10300 definitions. + * + * It should be possible to use these on really simple architectures, + * but it serves more as a starting point for new ports. + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef __ASM_GENERIC_SWITCH_TO_H +#define __ASM_GENERIC_SWITCH_TO_H + +#include <linux/thread_info.h> + +/* + * Context switching is now performed out-of-line in switch_to.S + */ +extern struct task_struct *__switch_to(struct task_struct *, + struct task_struct *); + +#define switch_to(prev, next, last) \ + do { \ + ((last) = __switch_to((prev), (next))); \ + } while (0) + +#endif /* __ASM_GENERIC_SWITCH_TO_H */ diff --git a/include/asm-generic/system.h b/include/asm-generic/system.h deleted file mode 100644 index 215efa74f5a2..000000000000 --- a/include/asm-generic/system.h +++ /dev/null @@ -1,141 +0,0 @@ -/* Generic system definitions, based on MN10300 definitions. - * - * It should be possible to use these on really simple architectures, - * but it serves more as a starting point for new ports. - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef __ASM_GENERIC_SYSTEM_H -#define __ASM_GENERIC_SYSTEM_H - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> -#include <linux/irqflags.h> - -#include <asm/cmpxchg-local.h> -#include <asm/cmpxchg.h> - -struct task_struct; - -/* context switching is now performed out-of-line in switch_to.S */ -extern struct task_struct *__switch_to(struct task_struct *, - struct task_struct *); -#define switch_to(prev, next, last) \ - do { \ - ((last) = __switch_to((prev), (next))); \ - } while (0) - -#define arch_align_stack(x) (x) - -#define nop() asm volatile ("nop") - -#endif /* !__ASSEMBLY__ */ - -/* - * Force strict CPU ordering. - * And yes, this is required on UP too when we're talking - * to devices. - * - * This implementation only contains a compiler barrier. - */ - -#define mb() asm volatile ("": : :"memory") -#define rmb() mb() -#define wmb() asm volatile ("": : :"memory") - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#endif - -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define set_wmb(var, value) do { var = value; wmb(); } while (0) - -#define read_barrier_depends() do {} while (0) -#define smp_read_barrier_depends() do {} while (0) - -/* - * we make sure local_irq_enable() doesn't cause priority inversion - */ -#ifndef __ASSEMBLY__ - -/* This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid xchg(). */ -extern void __xchg_called_with_bad_pointer(void); - -static inline -unsigned long __xchg(unsigned long x, volatile void *ptr, int size) -{ - unsigned long ret, flags; - - switch (size) { - case 1: -#ifdef __xchg_u8 - return __xchg_u8(x, ptr); -#else - local_irq_save(flags); - ret = *(volatile u8 *)ptr; - *(volatile u8 *)ptr = x; - local_irq_restore(flags); - return ret; -#endif /* __xchg_u8 */ - - case 2: -#ifdef __xchg_u16 - return __xchg_u16(x, ptr); -#else - local_irq_save(flags); - ret = *(volatile u16 *)ptr; - *(volatile u16 *)ptr = x; - local_irq_restore(flags); - return ret; -#endif /* __xchg_u16 */ - - case 4: -#ifdef __xchg_u32 - return __xchg_u32(x, ptr); -#else - local_irq_save(flags); - ret = *(volatile u32 *)ptr; - *(volatile u32 *)ptr = x; - local_irq_restore(flags); - return ret; -#endif /* __xchg_u32 */ - -#ifdef CONFIG_64BIT - case 8: -#ifdef __xchg_u64 - return __xchg_u64(x, ptr); -#else - local_irq_save(flags); - ret = *(volatile u64 *)ptr; - *(volatile u64 *)ptr = x; - local_irq_restore(flags); - return ret; -#endif /* __xchg_u64 */ -#endif /* CONFIG_64BIT */ - - default: - __xchg_called_with_bad_pointer(); - return x; - } -} - -#define xchg(ptr, x) \ - ((__typeof__(*(ptr))) __xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) - -#endif /* !__ASSEMBLY__ */ - -#endif /* __ASM_GENERIC_SYSTEM_H */ diff --git a/include/asm-generic/tlbflush.h b/include/asm-generic/tlbflush.h index c7af037024c7..d6d0a88430fe 100644 --- a/include/asm-generic/tlbflush.h +++ b/include/asm-generic/tlbflush.h @@ -9,6 +9,8 @@ #error need to implement an architecture specific asm/tlbflush.h #endif +#include <linux/bug.h> + static inline void flush_tlb_mm(struct mm_struct *mm) { BUG(); diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index 2292d1af9d70..991ef01cd77e 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -218,7 +218,7 @@ __SC_COMP(__NR_pwritev, sys_pwritev, compat_sys_pwritev) /* fs/sendfile.c */ #define __NR3264_sendfile 71 -__SC_3264(__NR3264_sendfile, sys_sendfile64, sys_sendfile) +__SYSCALL(__NR3264_sendfile, sys_sendfile64) /* fs/select.c */ #define __NR_pselect6 72 diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index b5e2e4c6b017..8aeadf6b553a 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -167,6 +167,7 @@ CPU_KEEP(exit.data) \ MEM_KEEP(init.data) \ MEM_KEEP(exit.data) \ + *(.data.unlikely) \ STRUCT_ALIGN(); \ *(__tracepoints) \ /* implement dynamic printk debug */ \ @@ -615,30 +616,23 @@ *(.init.setup) \ VMLINUX_SYMBOL(__setup_end) = .; -#define INITCALLS \ - *(.initcallearly.init) \ - VMLINUX_SYMBOL(__early_initcall_end) = .; \ - *(.initcall0.init) \ - *(.initcall0s.init) \ - *(.initcall1.init) \ - *(.initcall1s.init) \ - *(.initcall2.init) \ - *(.initcall2s.init) \ - *(.initcall3.init) \ - *(.initcall3s.init) \ - *(.initcall4.init) \ - *(.initcall4s.init) \ - *(.initcall5.init) \ - *(.initcall5s.init) \ - *(.initcallrootfs.init) \ - *(.initcall6.init) \ - *(.initcall6s.init) \ - *(.initcall7.init) \ - *(.initcall7s.init) +#define INIT_CALLS_LEVEL(level) \ + VMLINUX_SYMBOL(__initcall##level##_start) = .; \ + *(.initcall##level##.init) \ + *(.initcall##level##s.init) \ #define INIT_CALLS \ VMLINUX_SYMBOL(__initcall_start) = .; \ - INITCALLS \ + *(.initcallearly.init) \ + INIT_CALLS_LEVEL(0) \ + INIT_CALLS_LEVEL(1) \ + INIT_CALLS_LEVEL(2) \ + INIT_CALLS_LEVEL(3) \ + INIT_CALLS_LEVEL(4) \ + INIT_CALLS_LEVEL(5) \ + INIT_CALLS_LEVEL(rootfs) \ + INIT_CALLS_LEVEL(6) \ + INIT_CALLS_LEVEL(7) \ VMLINUX_SYMBOL(__initcall_end) = .; #define CON_INITCALL \ diff --git a/include/crypto/internal/aead.h b/include/crypto/internal/aead.h index d838c945575a..2eba340230a7 100644 --- a/include/crypto/internal/aead.h +++ b/include/crypto/internal/aead.h @@ -31,6 +31,8 @@ static inline void crypto_set_aead_spawn( crypto_set_spawn(&spawn->base, inst); } +struct crypto_alg *crypto_lookup_aead(const char *name, u32 type, u32 mask); + int crypto_grab_aead(struct crypto_aead_spawn *spawn, const char *name, u32 type, u32 mask); diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h index 3a748a6bf772..06e8b32d541c 100644 --- a/include/crypto/internal/skcipher.h +++ b/include/crypto/internal/skcipher.h @@ -34,6 +34,8 @@ static inline void crypto_set_skcipher_spawn( int crypto_grab_skcipher(struct crypto_skcipher_spawn *spawn, const char *name, u32 type, u32 mask); +struct crypto_alg *crypto_lookup_skcipher(const char *name, u32 type, u32 mask); + static inline void crypto_drop_skcipher(struct crypto_skcipher_spawn *spawn) { crypto_drop_spawn(&spawn->base); diff --git a/include/drm/drm.h b/include/drm/drm.h index 49d94ede2ec2..64ff02d5b730 100644 --- a/include/drm/drm.h +++ b/include/drm/drm.h @@ -617,6 +617,17 @@ struct drm_get_cap { __u64 value; }; +#define DRM_CLOEXEC O_CLOEXEC +struct drm_prime_handle { + __u32 handle; + + /** Flags.. only applicable for handle->fd */ + __u32 flags; + + /** Returned dmabuf file descriptor */ + __s32 fd; +}; + #include "drm_mode.h" #define DRM_IOCTL_BASE 'd' @@ -673,7 +684,8 @@ struct drm_get_cap { #define DRM_IOCTL_UNLOCK DRM_IOW( 0x2b, struct drm_lock) #define DRM_IOCTL_FINISH DRM_IOW( 0x2c, struct drm_lock) -#define DRM_IOCTL_GEM_PRIME_OPEN DRM_IOWR(0x2e, struct drm_gem_open) +#define DRM_IOCTL_PRIME_HANDLE_TO_FD DRM_IOWR(0x2d, struct drm_prime_handle) +#define DRM_IOCTL_PRIME_FD_TO_HANDLE DRM_IOWR(0x2e, struct drm_prime_handle) #define DRM_IOCTL_AGP_ACQUIRE DRM_IO( 0x30) #define DRM_IOCTL_AGP_RELEASE DRM_IO( 0x31) @@ -761,6 +773,8 @@ struct drm_event_vblank { #define DRM_CAP_DUMB_BUFFER 0x1 #define DRM_CAP_VBLANK_HIGH_CRTC 0x2 +#define DRM_CAP_DUMB_PREFERRED_DEPTH 0x3 +#define DRM_CAP_DUMB_PREFER_SHADOW 0x4 /* typedef area */ #ifndef __KERNEL__ diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 92f0981b5fb8..dd731043fecd 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -91,6 +91,7 @@ struct drm_device; #define DRM_UT_CORE 0x01 #define DRM_UT_DRIVER 0x02 #define DRM_UT_KMS 0x04 +#define DRM_UT_PRIME 0x08 /* * Three debug levels are defined. * drm_core, drm_driver, drm_kms @@ -150,6 +151,7 @@ int drm_err(const char *func, const char *format, ...); #define DRIVER_IRQ_VBL2 0x800 #define DRIVER_GEM 0x1000 #define DRIVER_MODESET 0x2000 +#define DRIVER_PRIME 0x4000 #define DRIVER_BUS_PCI 0x1 #define DRIVER_BUS_PLATFORM 0x2 @@ -215,6 +217,11 @@ int drm_err(const char *func, const char *format, ...); drm_ut_debug_printk(DRM_UT_KMS, DRM_NAME, \ __func__, fmt, ##args); \ } while (0) +#define DRM_DEBUG_PRIME(fmt, args...) \ + do { \ + drm_ut_debug_printk(DRM_UT_PRIME, DRM_NAME, \ + __func__, fmt, ##args); \ + } while (0) #define DRM_LOG(fmt, args...) \ do { \ drm_ut_debug_printk(DRM_UT_CORE, NULL, \ @@ -238,6 +245,7 @@ int drm_err(const char *func, const char *format, ...); #else #define DRM_DEBUG_DRIVER(fmt, args...) do { } while (0) #define DRM_DEBUG_KMS(fmt, args...) do { } while (0) +#define DRM_DEBUG_PRIME(fmt, args...) do { } while (0) #define DRM_DEBUG(fmt, arg...) do { } while (0) #define DRM_LOG(fmt, arg...) do { } while (0) #define DRM_LOG_KMS(fmt, args...) do { } while (0) @@ -410,6 +418,12 @@ struct drm_pending_event { void (*destroy)(struct drm_pending_event *event); }; +/* initial implementaton using a linked list - todo hashtab */ +struct drm_prime_file_private { + struct list_head head; + struct mutex lock; +}; + /** File private data */ struct drm_file { int authenticated; @@ -437,6 +451,8 @@ struct drm_file { wait_queue_head_t event_wait; struct list_head event_list; int event_space; + + struct drm_prime_file_private prime; }; /** Wait queue */ @@ -652,6 +668,12 @@ struct drm_gem_object { uint32_t pending_write_domain; void *driver_private; + + /* dma buf exported from this GEM object */ + struct dma_buf *export_dma_buf; + + /* dma buf attachment backing this object */ + struct dma_buf_attachment *import_attach; }; #include "drm_crtc.h" @@ -890,6 +912,20 @@ struct drm_driver { int (*gem_open_object) (struct drm_gem_object *, struct drm_file *); void (*gem_close_object) (struct drm_gem_object *, struct drm_file *); + /* prime: */ + /* export handle -> fd (see drm_gem_prime_handle_to_fd() helper) */ + int (*prime_handle_to_fd)(struct drm_device *dev, struct drm_file *file_priv, + uint32_t handle, uint32_t flags, int *prime_fd); + /* import fd -> handle (see drm_gem_prime_fd_to_handle() helper) */ + int (*prime_fd_to_handle)(struct drm_device *dev, struct drm_file *file_priv, + int prime_fd, uint32_t *handle); + /* export GEM -> dmabuf */ + struct dma_buf * (*gem_prime_export)(struct drm_device *dev, + struct drm_gem_object *obj, int flags); + /* import dmabuf -> GEM */ + struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev, + struct dma_buf *dma_buf); + /* vga arb irq handler */ void (*vgaarb_irq)(struct drm_device *dev, bool state); @@ -1170,6 +1206,8 @@ struct drm_device { struct idr object_name_idr; /*@} */ int switch_power_state; + + atomic_t unplugged; /* device has been unplugged or gone away */ }; #define DRM_SWITCH_POWER_ON 0 @@ -1235,6 +1273,19 @@ static inline int drm_mtrr_del(int handle, unsigned long offset, } #endif +static inline void drm_device_set_unplugged(struct drm_device *dev) +{ + smp_wmb(); + atomic_set(&dev->unplugged, 1); +} + +static inline int drm_device_is_unplugged(struct drm_device *dev) +{ + int ret = atomic_read(&dev->unplugged); + smp_rmb(); + return ret; +} + /******************************************************************/ /** \name Internal function definitions */ /*@{*/ @@ -1264,11 +1315,6 @@ extern unsigned int drm_poll(struct file *filp, struct poll_table_struct *wait); /* Memory management support (drm_memory.h) */ #include "drm_memory.h" -extern void drm_mem_init(void); -extern int drm_mem_info(char *buf, char **start, off_t offset, - int request, int *eof, void *data); -extern void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area); - extern void drm_free_agp(DRM_AGP_MEM * handle, int pages); extern int drm_bind_agp(DRM_AGP_MEM * handle, unsigned int start); extern DRM_AGP_MEM *drm_agp_bind_pages(struct drm_device *dev, @@ -1383,12 +1429,8 @@ extern void drm_core_reclaim_buffers(struct drm_device *dev, /* IRQ support (drm_irq.h) */ extern int drm_control(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern irqreturn_t drm_irq_handler(DRM_IRQ_ARGS); extern int drm_irq_install(struct drm_device *dev); extern int drm_irq_uninstall(struct drm_device *dev); -extern void drm_driver_irq_preinstall(struct drm_device *dev); -extern void drm_driver_irq_postinstall(struct drm_device *dev); -extern void drm_driver_irq_uninstall(struct drm_device *dev); extern int drm_vblank_init(struct drm_device *dev, int num_crtcs); extern int drm_wait_vblank(struct drm_device *dev, void *data, @@ -1464,6 +1506,7 @@ extern void drm_master_put(struct drm_master **master); extern void drm_put_dev(struct drm_device *dev); extern int drm_put_minor(struct drm_minor **minor); +extern void drm_unplug_dev(struct drm_device *dev); extern unsigned int drm_debug; extern unsigned int drm_vblank_offdelay; @@ -1502,6 +1545,32 @@ extern int drm_vblank_info(struct seq_file *m, void *data); extern int drm_clients_info(struct seq_file *m, void* data); extern int drm_gem_name_info(struct seq_file *m, void *data); + +extern int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, uint32_t flags, + int *prime_fd); +extern int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, uint32_t *handle); + +extern int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +extern int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); + +extern struct sg_table *drm_prime_pages_to_sg(struct page **pages, int nr_pages); +extern void drm_prime_gem_destroy(struct drm_gem_object *obj, struct sg_table *sg); + + +void drm_prime_init_file_private(struct drm_prime_file_private *prime_fpriv); +void drm_prime_destroy_file_private(struct drm_prime_file_private *prime_fpriv); +int drm_prime_add_imported_buf_handle(struct drm_prime_file_private *prime_fpriv, struct dma_buf *dma_buf, uint32_t handle); +int drm_prime_lookup_imported_buf_handle(struct drm_prime_file_private *prime_fpriv, struct dma_buf *dma_buf, uint32_t *handle); +void drm_prime_remove_imported_buf_handle(struct drm_prime_file_private *prime_fpriv, struct dma_buf *dma_buf); + +int drm_prime_add_dma_buf(struct drm_device *dev, struct drm_gem_object *obj); +int drm_prime_lookup_obj(struct drm_device *dev, struct dma_buf *buf, + struct drm_gem_object **obj); + #if DRM_DEBUG_CODE extern int drm_vma_info(struct seq_file *m, void *data); #endif diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 4cd4be26722c..e250eda4e3a8 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -121,7 +121,7 @@ struct drm_display_mode { char name[DRM_DISPLAY_MODE_LEN]; enum drm_mode_status status; - int type; + unsigned int type; /* Proposed mode values */ int clock; /* in kHz */ @@ -257,7 +257,7 @@ struct drm_property_blob { struct drm_mode_object base; struct list_head head; unsigned int length; - void *data; + unsigned char data[]; }; struct drm_property_enum { @@ -796,6 +796,9 @@ struct drm_mode_config { struct drm_property *scaling_mode_property; struct drm_property *dithering_mode_property; struct drm_property *dirty_info_property; + + /* dumb ioctl parameters */ + uint32_t preferred_depth, prefer_shadow; }; #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) @@ -807,23 +810,29 @@ struct drm_mode_config { #define obj_to_blob(x) container_of(x, struct drm_property_blob, base) #define obj_to_plane(x) container_of(x, struct drm_plane, base) +struct drm_prop_enum_list { + int type; + char *name; +}; -extern void drm_crtc_init(struct drm_device *dev, - struct drm_crtc *crtc, - const struct drm_crtc_funcs *funcs); +extern int drm_crtc_init(struct drm_device *dev, + struct drm_crtc *crtc, + const struct drm_crtc_funcs *funcs); extern void drm_crtc_cleanup(struct drm_crtc *crtc); -extern void drm_connector_init(struct drm_device *dev, - struct drm_connector *connector, - const struct drm_connector_funcs *funcs, - int connector_type); +extern int drm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type); extern void drm_connector_cleanup(struct drm_connector *connector); +/* helper to unplug all connectors from sysfs for device */ +extern void drm_connector_unplug_all(struct drm_device *dev); -extern void drm_encoder_init(struct drm_device *dev, - struct drm_encoder *encoder, - const struct drm_encoder_funcs *funcs, - int encoder_type); +extern int drm_encoder_init(struct drm_device *dev, + struct drm_encoder *encoder, + const struct drm_encoder_funcs *funcs, + int encoder_type); extern int drm_plane_init(struct drm_device *dev, struct drm_plane *plane, @@ -848,6 +857,7 @@ extern struct edid *drm_get_edid(struct drm_connector *connector, extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid); extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode); extern void drm_mode_remove(struct drm_connector *connector, struct drm_display_mode *mode); +extern void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src); extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, const struct drm_display_mode *mode); extern void drm_mode_debug_printmodeline(struct drm_display_mode *mode); @@ -862,7 +872,7 @@ extern int drm_mode_height(struct drm_display_mode *mode); /* for us by fb module */ extern int drm_mode_attachmode_crtc(struct drm_device *dev, struct drm_crtc *crtc, - struct drm_display_mode *mode); + const struct drm_display_mode *mode); extern int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode); extern struct drm_display_mode *drm_mode_create(struct drm_device *dev); @@ -904,6 +914,13 @@ extern int drm_connector_attach_property(struct drm_connector *connector, struct drm_property *property, uint64_t init_val); extern struct drm_property *drm_property_create(struct drm_device *dev, int flags, const char *name, int num_values); +extern struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, + const char *name, + const struct drm_prop_enum_list *props, + int num_values); +struct drm_property *drm_property_create_range(struct drm_device *dev, int flags, + const char *name, + uint64_t min, uint64_t max); extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property); extern int drm_property_add_enum(struct drm_property *property, int index, uint64_t value, const char *name); @@ -919,7 +936,7 @@ extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, struct drm_encoder *encoder); extern void drm_mode_connector_detach_encoder(struct drm_connector *connector, struct drm_encoder *encoder); -extern bool drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, +extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, int gamma_size); extern struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type); @@ -995,6 +1012,7 @@ extern int drm_add_modes_noedid(struct drm_connector *connector, int hdisplay, int vdisplay); extern int drm_edid_header_is_valid(const u8 *raw_edid); +extern bool drm_edid_block_valid(u8 *raw_edid); extern bool drm_edid_is_valid(struct edid *edid); struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev, int hsize, int vsize, int fresh); diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index 74ce91684629..bcb9a66baa8c 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -238,5 +238,6 @@ int drm_av_sync_delay(struct drm_connector *connector, struct drm_display_mode *mode); struct drm_connector *drm_select_eld(struct drm_encoder *encoder, struct drm_display_mode *mode); +int drm_load_edid_firmware(struct drm_connector *connector); #endif /* __DRM_EDID_H__ */ diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 6e3076ad646e..5120b01c2eeb 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -35,7 +35,6 @@ struct drm_fb_helper; #include <linux/kgdb.h> struct drm_fb_helper_crtc { - uint32_t crtc_id; struct drm_mode_set mode_set; struct drm_display_mode *desired_mode; }; @@ -74,7 +73,6 @@ struct drm_fb_helper { int connector_count; struct drm_fb_helper_connector **connector_info; struct drm_fb_helper_funcs *funcs; - int conn_limit; struct fb_info *fbdev; u32 pseudo_palette[17]; struct list_head kernel_fb_list; diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index 2a2acda8b437..4a0aae38e160 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -27,6 +27,8 @@ #ifndef _DRM_MODE_H #define _DRM_MODE_H +#include <linux/types.h> + #define DRM_DISPLAY_INFO_LEN 32 #define DRM_CONNECTOR_NAME_LEN 32 #define DRM_DISPLAY_MODE_LEN 32 diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 14b6cd022284..58d0bdab68dd 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -202,11 +202,49 @@ {0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x677B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6784, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6788, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x678A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6790, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x679E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x679F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6801, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6802, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6810, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6818, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6819, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6821, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6823, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6824, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6826, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6827, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6829, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x682D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x682F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6830, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6831, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6837, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6838, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6839, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x683B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x683D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x683F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6842, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6843, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6849, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x684C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6858, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6859, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ @@ -512,6 +550,22 @@ {0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9901, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9903, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9904, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9905, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9906, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9907, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9908, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9909, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x990A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x990F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9990, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9991, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9992, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9993, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9994, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0, 0, 0} #define r128_PCI_IDS \ diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 1ed3aae893a5..3963116083ae 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -74,16 +74,37 @@ struct drm_exynos_gem_mmap { uint64_t mapped; }; +/** + * A structure for user connection request of virtual display. + * + * @connection: indicate whether doing connetion or not by user. + * @extensions: if this value is 1 then the vidi driver would need additional + * 128bytes edid data. + * @edid: the edid data pointer from user side. + */ +struct drm_exynos_vidi_connection { + unsigned int connection; + unsigned int extensions; + uint64_t *edid; +}; + struct drm_exynos_plane_set_zpos { __u32 plane_id; __s32 zpos; }; +/* memory type definitions. */ +enum e_drm_exynos_gem_mem_type { + /* Physically Non-Continuous memory. */ + EXYNOS_BO_NONCONTIG = 1 << 0 +}; + #define DRM_EXYNOS_GEM_CREATE 0x00 #define DRM_EXYNOS_GEM_MAP_OFFSET 0x01 #define DRM_EXYNOS_GEM_MMAP 0x02 /* Reserved 0x03 ~ 0x05 for exynos specific gem ioctl */ #define DRM_EXYNOS_PLANE_SET_ZPOS 0x06 +#define DRM_EXYNOS_VIDI_CONNECTION 0x07 #define DRM_IOCTL_EXYNOS_GEM_CREATE DRM_IOWR(DRM_COMMAND_BASE + \ DRM_EXYNOS_GEM_CREATE, struct drm_exynos_gem_create) @@ -97,6 +118,9 @@ struct drm_exynos_plane_set_zpos { #define DRM_IOCTL_EXYNOS_PLANE_SET_ZPOS DRM_IOWR(DRM_COMMAND_BASE + \ DRM_EXYNOS_PLANE_SET_ZPOS, struct drm_exynos_plane_set_zpos) +#define DRM_IOCTL_EXYNOS_VIDI_CONNECTION DRM_IOWR(DRM_COMMAND_BASE + \ + DRM_EXYNOS_VIDI_CONNECTION, struct drm_exynos_vidi_connection) + #ifdef __KERNEL__ /** @@ -147,11 +171,13 @@ struct exynos_drm_common_hdmi_pd { * @timing: default video mode for initializing * @default_win: default window layer number to be used for UI. * @bpp: default bit per pixel. + * @is_v13: set if hdmi version 13 is. */ struct exynos_drm_hdmi_pdata { struct fb_videomode timing; unsigned int default_win; unsigned int bpp; + unsigned int is_v13:1; }; #endif /* __KERNEL__ */ diff --git a/include/drm/gma_drm.h b/include/drm/gma_drm.h index 113686785717..884613ee00ad 100644 --- a/include/drm/gma_drm.h +++ b/include/drm/gma_drm.h @@ -83,9 +83,9 @@ struct drm_psb_gem_mmap { #define DRM_GMA_GAMMA 0x04 /* Set gamma table */ #define DRM_GMA_ADB 0x05 /* Get backlight */ #define DRM_GMA_DPST_BL 0x06 /* Set backlight */ -#define DRM_GMA_GET_PIPE_FROM_CRTC_ID 0x1 /* CRTC to physical pipe# */ #define DRM_GMA_MODE_OPERATION 0x07 /* Mode validation/DC set */ #define PSB_MODE_OPERATION_MODE_VALID 0x01 +#define DRM_GMA_GET_PIPE_FROM_CRTC_ID 0x08 /* CRTC to physical pipe# */ #endif diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index 924f6a454fed..da929bb5b788 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -296,6 +296,7 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_HAS_EXEC_CONSTANTS 14 #define I915_PARAM_HAS_RELAXED_DELTA 15 #define I915_PARAM_HAS_GEN7_SOL_RESET 16 +#define I915_PARAM_HAS_LLC 17 typedef struct drm_i915_getparam { int param; diff --git a/include/drm/intel-gtt.h b/include/drm/intel-gtt.h index b174620cc9b3..923afb5dcf0c 100644 --- a/include/drm/intel-gtt.h +++ b/include/drm/intel-gtt.h @@ -15,6 +15,10 @@ const struct intel_gtt { unsigned int needs_dmar : 1; /* Whether we idle the gpu before mapping/unmapping */ unsigned int do_idle_maps : 1; + /* Share the scratch page dma with ppgtts. */ + dma_addr_t scratch_page_dma; + /* for ppgtt PDE access */ + u32 __iomem *gtt; } *intel_gtt_get(void); void intel_gtt_chipset_flush(void); @@ -40,4 +44,8 @@ void intel_gtt_insert_pages(unsigned int first_entry, unsigned int num_entries, /* flag for GFDT type */ #define AGP_USER_CACHED_MEMORY_GFDT (1 << 3) +#ifdef CONFIG_INTEL_IOMMU +extern int intel_iommu_gfx_mapped; +#endif + #endif diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index b55da40953fd..7c491b4bcf65 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -804,13 +804,23 @@ struct drm_radeon_gem_create { uint32_t flags; }; -#define RADEON_TILING_MACRO 0x1 -#define RADEON_TILING_MICRO 0x2 -#define RADEON_TILING_SWAP_16BIT 0x4 -#define RADEON_TILING_SWAP_32BIT 0x8 -#define RADEON_TILING_SURFACE 0x10 /* this object requires a surface - * when mapped - i.e. front buffer */ -#define RADEON_TILING_MICRO_SQUARE 0x20 +#define RADEON_TILING_MACRO 0x1 +#define RADEON_TILING_MICRO 0x2 +#define RADEON_TILING_SWAP_16BIT 0x4 +#define RADEON_TILING_SWAP_32BIT 0x8 +/* this object requires a surface when mapped - i.e. front buffer */ +#define RADEON_TILING_SURFACE 0x10 +#define RADEON_TILING_MICRO_SQUARE 0x20 +#define RADEON_TILING_EG_BANKW_SHIFT 8 +#define RADEON_TILING_EG_BANKW_MASK 0xf +#define RADEON_TILING_EG_BANKH_SHIFT 12 +#define RADEON_TILING_EG_BANKH_MASK 0xf +#define RADEON_TILING_EG_MACRO_TILE_ASPECT_SHIFT 16 +#define RADEON_TILING_EG_MACRO_TILE_ASPECT_MASK 0xf +#define RADEON_TILING_EG_TILE_SPLIT_SHIFT 24 +#define RADEON_TILING_EG_TILE_SPLIT_MASK 0xf +#define RADEON_TILING_EG_STENCIL_TILE_SPLIT_SHIFT 28 +#define RADEON_TILING_EG_STENCIL_TILE_SPLIT_MASK 0xf struct drm_radeon_gem_set_tiling { uint32_t handle; @@ -898,6 +908,7 @@ struct drm_radeon_gem_va { #define RADEON_CHUNK_ID_RELOCS 0x01 #define RADEON_CHUNK_ID_IB 0x02 #define RADEON_CHUNK_ID_FLAGS 0x03 +#define RADEON_CHUNK_ID_CONST_IB 0x04 /* The first dword of RADEON_CHUNK_ID_FLAGS is a uint32 of these flags: */ #define RADEON_CS_KEEP_TILING_FLAGS 0x01 @@ -952,6 +963,8 @@ struct drm_radeon_cs { #define RADEON_INFO_VA_START 0x0e /* maximum size of ib using the virtual memory cs */ #define RADEON_INFO_IB_VM_MAX_SIZE 0x0f +/* max pipes - needed for compute shaders */ +#define RADEON_INFO_MAX_PIPES 0x10 struct drm_radeon_info { uint32_t request; diff --git a/include/drm/ttm/ttm_memory.h b/include/drm/ttm/ttm_memory.h index 26c1f78d136f..d6d1da468c97 100644 --- a/include/drm/ttm/ttm_memory.h +++ b/include/drm/ttm/ttm_memory.h @@ -30,6 +30,7 @@ #include <linux/workqueue.h> #include <linux/spinlock.h> +#include <linux/bug.h> #include <linux/wait.h> #include <linux/errno.h> #include <linux/kobject.h> diff --git a/include/linux/Kbuild b/include/linux/Kbuild index a25555381097..3c9b616c834a 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -3,6 +3,7 @@ header-y += can/ header-y += caif/ header-y += dvb/ header-y += hdlc/ +header-y += hsi/ header-y += isdn/ header-y += mmc/ header-y += nfsd/ @@ -120,7 +121,6 @@ header-y += errno.h header-y += errqueue.h header-y += ethtool.h header-y += eventpoll.h -header-y += ext2_fs.h header-y += fadvise.h header-y += falloc.h header-y += fanotify.h @@ -357,6 +357,7 @@ header-y += suspend_ioctls.h header-y += swab.h header-y += synclink.h header-y += sysctl.h +header-y += sysinfo.h header-y += taskstats.h header-y += tcp.h header-y += telephony.h diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 3f968665899b..f421dd84f29d 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -151,6 +151,7 @@ extern int ec_write(u8 addr, u8 val); extern int ec_transaction(u8 command, const u8 *wdata, unsigned wdata_len, u8 *rdata, unsigned rdata_len); +extern acpi_handle ec_get_handle(void); #if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE) @@ -371,4 +372,14 @@ static inline int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), #endif /* !CONFIG_ACPI */ +#ifdef CONFIG_ACPI +void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, + u32 pm1a_ctrl, u32 pm1b_ctrl)); + +acpi_status acpi_os_prepare_sleep(u8 sleep_state, + u32 pm1a_control, u32 pm1b_control); +#else +#define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0) +#endif + #endif /*_LINUX_ACPI_H*/ diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h index 2c8731664180..86fa7a71336a 100644 --- a/include/linux/aio_abi.h +++ b/include/linux/aio_abi.h @@ -30,7 +30,7 @@ #include <linux/types.h> #include <asm/byteorder.h> -typedef unsigned long aio_context_t; +typedef __kernel_ulong_t aio_context_t; enum { IOCB_CMD_PREAD = 0, diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 724c69c40bb8..7847e197730a 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -60,6 +60,9 @@ extern struct bus_type amba_bustype; int amba_driver_register(struct amba_driver *); void amba_driver_unregister(struct amba_driver *); +struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t); +void amba_device_put(struct amba_device *); +int amba_device_add(struct amba_device *, struct resource *); int amba_device_register(struct amba_device *, struct resource *); void amba_device_unregister(struct amba_device *); struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); @@ -89,4 +92,46 @@ void amba_release_regions(struct amba_device *); #define amba_manf(d) AMBA_MANF_BITS((d)->periphid) #define amba_part(d) AMBA_PART_BITS((d)->periphid) +#define __AMBA_DEV(busid, data, mask) \ + { \ + .coherent_dma_mask = mask, \ + .init_name = busid, \ + .platform_data = data, \ + } + +/* + * APB devices do not themselves have the ability to address memory, + * so DMA masks should be zero (much like USB peripheral devices.) + * The DMA controller DMA masks should be used instead (much like + * USB host controllers in conventional PCs.) + */ +#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \ +struct amba_device name##_device = { \ + .dev = __AMBA_DEV(busid, data, 0), \ + .res = DEFINE_RES_MEM(base, SZ_4K), \ + .irq = irqs, \ + .periphid = id, \ +} + +/* + * AHB devices are DMA capable, so set their DMA masks + */ +#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \ +struct amba_device name##_device = { \ + .dev = __AMBA_DEV(busid, data, ~0ULL), \ + .res = DEFINE_RES_MEM(base, SZ_4K), \ + .dma_mask = ~0ULL, \ + .irq = irqs, \ + .periphid = id, \ +} + +/* + * module_amba_driver() - Helper macro for drivers that don't do anything + * special in module init/exit. This eliminates a lot of boilerplate. Each + * module may only use this macro once, and calling it replaces module_init() + * and module_exit() + */ +#define module_amba_driver(__amba_drv) \ + module_driver(__amba_drv, amba_driver_register, amba_driver_unregister) + #endif diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 0101e9c17fa1..32a89cf5ec45 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -6,6 +6,19 @@ #include <linux/mmc/host.h> + +/* + * These defines is places here due to access is needed from machine + * configuration files. The ST Micro version does not have ROD and + * reuse the voltage registers for direction settings. + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) + /* Just some dummy forwarding */ struct dma_chan; @@ -18,7 +31,8 @@ struct dma_chan; * @ocr_mask: available voltages on the 4 pins from the block, this * is ignored if a regulator is used, see the MMC_VDD_* masks in * mmc/host.h - * @vdd_handler: a callback function to translate a MMC_VDD_* + * @ios_handler: a callback function to act on specfic ios changes, + * used for example to control a levelshifter * mask into a value to be binary (or set some other custom bits * in MMCIPWR) or:ed and written into the MMCIPWR register of the * block. May also control external power based on the power_mode. @@ -31,6 +45,8 @@ struct dma_chan; * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h + * @sigdir: a bit field indicating for what bits in the MMC bus the host + * should enable signal direction indication. * @dma_filter: function used to select an appropriate RX and TX * DMA channel to be used for DMA, if and only if you're deploying the * generic DMA engine @@ -46,14 +62,14 @@ struct dma_chan; struct mmci_platform_data { unsigned int f_max; unsigned int ocr_mask; - u32 (*vdd_handler)(struct device *, unsigned int vdd, - unsigned char power_mode); + int (*ios_handler)(struct device *, struct mmc_ios *); unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; bool cd_invert; unsigned long capabilities; unsigned long capabilities2; + u32 sigdir; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index 3672f40f3455..b8c51124ed19 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -25,8 +25,6 @@ #ifndef _SSP_PL022_H #define _SSP_PL022_H -#include <linux/device.h> - /** * whether SSP is in loopback mode or not */ diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 033f6aa670de..e64ce2cfee99 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,9 +47,6 @@ enum { * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel * @cctl_opt: default options for the channel control register - * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave - * channels. Fill with 'true' if peripheral should be flow controller. Direction - * will be selected at Runtime. * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -68,7 +65,6 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; - bool device_fc; dma_addr_t addr; bool circular_buffer; bool single; @@ -176,13 +172,15 @@ enum pl08x_dma_chan_state { * @runtime_addr: address for RX/TX according to the runtime config * @runtime_direction: current direction of this channel according to * runtime config - * @lc: last completed transaction on this channel * @pend_list: queued transactions pending on this channel * @at: active transaction on this channel * @lock: a lock for this channel data * @host: a pointer to the host (internal use) * @state: whether the channel is idle, paused, running etc * @slave: whether this channel is a device (slave) or for memcpy + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. * @waiting: a TX descriptor on this channel which is waiting for a physical * channel to become available */ @@ -198,13 +196,13 @@ struct pl08x_dma_chan { u32 src_cctl; u32 dst_cctl; enum dma_transfer_direction runtime_direction; - dma_cookie_t lc; struct list_head pend_list; struct pl08x_txd *at; spinlock_t lock; struct pl08x_driver_data *host; enum pl08x_dma_chan_state state; bool slave; + bool device_fc; struct pl08x_txd *waiting; }; diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index 12e023c19ac1..fe93758e8403 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -13,7 +13,6 @@ #define __AMBA_PL330_H_ #include <linux/dmaengine.h> -#include <asm/hardware/pl330.h> struct dma_pl330_platdata { /* diff --git a/include/linux/amd-iommu.h b/include/linux/amd-iommu.h index ef00610837d4..15f6b9edd0b1 100644 --- a/include/linux/amd-iommu.h +++ b/include/linux/amd-iommu.h @@ -28,7 +28,7 @@ struct task_struct; struct pci_dev; extern int amd_iommu_detect(void); - +extern int amd_iommu_init_hardware(void); /** * amd_iommu_enable_device_erratum() - Enable erratum workaround for device diff --git a/include/linux/apple_bl.h b/include/linux/apple_bl.h new file mode 100644 index 000000000000..47bedc0eee69 --- /dev/null +++ b/include/linux/apple_bl.h @@ -0,0 +1,26 @@ +/* + * apple_bl exported symbols + */ + +#ifndef _LINUX_APPLE_BL_H +#define _LINUX_APPLE_BL_H + +#ifdef CONFIG_BACKLIGHT_APPLE + +extern int apple_bl_register(void); +extern void apple_bl_unregister(void); + +#else /* !CONFIG_BACKLIGHT_APPLE */ + +static inline int apple_bl_register(void) +{ + return 0; +} + +static inline void apple_bl_unregister(void) +{ +} + +#endif /* !CONFIG_BACKLIGHT_APPLE */ + +#endif /* _LINUX_APPLE_BL_H */ diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index f4ff882cb2da..06fd4bbc58f6 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -213,10 +213,10 @@ struct atm_cirange { #ifdef __KERNEL__ -#include <linux/device.h> #include <linux/wait.h> /* wait_queue_head_t */ #include <linux/time.h> /* struct timeval */ #include <linux/net.h> +#include <linux/bug.h> #include <linux/skbuff.h> /* struct sk_buff */ #include <linux/uio.h> #include <net/sock.h> @@ -249,6 +249,7 @@ struct k_atm_dev_stats { struct k_atm_aal_stats aal5; }; +struct device; enum { ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h index 53ba65e30caa..1d14b1dc1aee 100644 --- a/include/linux/atmel_tc.h +++ b/include/linux/atmel_tc.h @@ -34,10 +34,19 @@ struct clk; /** + * struct atmel_tcb_config - SoC data for a Timer/Counter Block + * @counter_width: size in bits of a timer counter register + */ +struct atmel_tcb_config { + size_t counter_width; +}; + +/** * struct atmel_tc - information about a Timer/Counter Block * @pdev: physical device * @iomem: resource associated with the I/O register * @regs: mapping through which the I/O registers can be accessed + * @tcb_config: configuration data from SoC * @irq: irq for each of the three channels * @clk: internal clock source for each of the three channels * @node: list node, for tclib internal use @@ -54,6 +63,7 @@ struct atmel_tc { struct platform_device *pdev; struct resource *iomem; void __iomem *regs; + struct atmel_tcb_config *tcb_config; int irq[3]; struct clk *clk[3]; struct list_head node; diff --git a/include/linux/atomic.h b/include/linux/atomic.h index 42b77b5446d2..70cfcb2d63c4 100644 --- a/include/linux/atomic.h +++ b/include/linux/atomic.h @@ -24,7 +24,9 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) * Atomically increments @v by 1, so long as @v is non-zero. * Returns non-zero if @v was non-zero, and zero otherwise. */ +#ifndef atomic_inc_not_zero #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) +#endif /** * atomic_inc_not_zero_hint - increment if not null diff --git a/include/linux/attribute_container.h b/include/linux/attribute_container.h index c3ab81428c66..896c6892f327 100644 --- a/include/linux/attribute_container.h +++ b/include/linux/attribute_container.h @@ -9,10 +9,11 @@ #ifndef _ATTRIBUTE_CONTAINER_H_ #define _ATTRIBUTE_CONTAINER_H_ -#include <linux/device.h> #include <linux/list.h> #include <linux/klist.h> +struct device; + struct attribute_container { struct list_head node; struct klist containers; diff --git a/include/linux/audit.h b/include/linux/audit.h index 9ff7a2c48b50..ed3ef1972496 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -684,7 +684,7 @@ extern void audit_log_untrustedstring(struct audit_buffer *ab, const char *string); extern void audit_log_d_path(struct audit_buffer *ab, const char *prefix, - struct path *path); + const struct path *path); extern void audit_log_key(struct audit_buffer *ab, char *key); extern void audit_log_lost(const char *message); diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 0092102db2de..366422bc1633 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -92,17 +92,17 @@ struct linux_binfmt { unsigned long min_coredump; /* minimal dump size */ }; -extern int __register_binfmt(struct linux_binfmt *fmt, int insert); +extern void __register_binfmt(struct linux_binfmt *fmt, int insert); /* Registration of default binfmt handlers */ -static inline int register_binfmt(struct linux_binfmt *fmt) +static inline void register_binfmt(struct linux_binfmt *fmt) { - return __register_binfmt(fmt, 0); + __register_binfmt(fmt, 0); } /* Same as above, but adds a new binfmt at the top of the list */ -static inline int insert_binfmt(struct linux_binfmt *fmt) +static inline void insert_binfmt(struct linux_binfmt *fmt) { - return __register_binfmt(fmt, 1); + __register_binfmt(fmt, 1); } extern void unregister_binfmt(struct linux_binfmt *); diff --git a/include/linux/bio.h b/include/linux/bio.h index de5422a57511..4d94eb8bcbcc 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -23,6 +23,7 @@ #include <linux/highmem.h> #include <linux/mempool.h> #include <linux/ioprio.h> +#include <linux/bug.h> #ifdef CONFIG_BLOCK diff --git a/include/linux/bit_spinlock.h b/include/linux/bit_spinlock.h index ac4d9f8b52e9..3b5bafce4337 100644 --- a/include/linux/bit_spinlock.h +++ b/include/linux/bit_spinlock.h @@ -4,6 +4,7 @@ #include <linux/kernel.h> #include <linux/preempt.h> #include <linux/atomic.h> +#include <linux/bug.h> /* * bit-based spin_lock() diff --git a/include/linux/bitops.h b/include/linux/bitops.h index 94300fe46cce..a3b6b82108b9 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -27,11 +27,22 @@ extern unsigned long __sw_hweight64(__u64 w); (bit) = find_next_bit((addr), (size), (bit) + 1)) /* same as for_each_set_bit() but use bit as value to start with */ -#define for_each_set_bit_cont(bit, addr, size) \ +#define for_each_set_bit_from(bit, addr, size) \ for ((bit) = find_next_bit((addr), (size), (bit)); \ (bit) < (size); \ (bit) = find_next_bit((addr), (size), (bit) + 1)) +#define for_each_clear_bit(bit, addr, size) \ + for ((bit) = find_first_zero_bit((addr), (size)); \ + (bit) < (size); \ + (bit) = find_next_zero_bit((addr), (size), (bit) + 1)) + +/* same as for_each_clear_bit() but use bit as value to start with */ +#define for_each_clear_bit_from(bit, addr, size) \ + for ((bit) = find_next_zero_bit((addr), (size), (bit)); \ + (bit) < (size); \ + (bit) = find_next_zero_bit((addr), (size), (bit) + 1)) + static __inline__ int get_bitmask_order(unsigned int count) { int order; diff --git a/include/linux/bug.h b/include/linux/bug.h index d276b5510c83..72961c39576a 100644 --- a/include/linux/bug.h +++ b/include/linux/bug.h @@ -11,6 +11,67 @@ enum bug_trap_type { struct pt_regs; +#ifdef __CHECKER__ +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) +#define BUILD_BUG_ON_ZERO(e) (0) +#define BUILD_BUG_ON_NULL(e) ((void*)0) +#define BUILD_BUG_ON(condition) +#define BUILD_BUG() (0) +#else /* __CHECKER__ */ + +/* Force a compilation error if a constant expression is not a power of 2 */ +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ + BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) + +/* Force a compilation error if condition is true, but also produce a + result (of value 0 and type size_t), so the expression can be used + e.g. in a structure initializer (or where-ever else comma expressions + aren't permitted). */ +#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) +#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) + +/** + * BUILD_BUG_ON - break compile if a condition is true. + * @condition: the condition which the compiler should know is false. + * + * If you have some code which relies on certain constants being equal, or + * other compile-time-evaluated condition, you should use BUILD_BUG_ON to + * detect if someone changes it. + * + * The implementation uses gcc's reluctance to create a negative array, but + * gcc (as of 4.4) only emits that error for obvious cases (eg. not arguments + * to inline functions). So as a fallback we use the optimizer; if it can't + * prove the condition is false, it will cause a link error on the undefined + * "__build_bug_on_failed". This error message can be harder to track down + * though, hence the two different methods. + */ +#ifndef __OPTIMIZE__ +#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) +#else +extern int __build_bug_on_failed; +#define BUILD_BUG_ON(condition) \ + do { \ + ((void)sizeof(char[1 - 2*!!(condition)])); \ + if (condition) __build_bug_on_failed = 1; \ + } while(0) +#endif + +/** + * BUILD_BUG - break compile if used. + * + * If you have some code that you expect the compiler to eliminate at + * build time, you should use BUILD_BUG to detect if it is + * unexpectedly used. + */ +#define BUILD_BUG() \ + do { \ + extern void __build_bug_failed(void) \ + __linktime_error("BUILD_BUG failed"); \ + __build_bug_failed(); \ + } while (0) + +#endif /* __CHECKER__ */ + #ifdef CONFIG_GENERIC_BUG #include <asm-generic/bug.h> diff --git a/include/linux/c2port.h b/include/linux/c2port.h index a2f7d7413f30..4efabcb51347 100644 --- a/include/linux/c2port.h +++ b/include/linux/c2port.h @@ -9,11 +9,12 @@ * the Free Software Foundation */ -#include <linux/device.h> #include <linux/kmemcheck.h> #define C2PORT_NAME_LEN 32 +struct device; + /* * C2 port basic structs */ diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index 7c48029dffe6..dfd7f187c351 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -910,7 +910,6 @@ struct mode_page_header { #ifdef __KERNEL__ #include <linux/fs.h> /* not really needed, later.. */ -#include <linux/device.h> #include <linux/list.h> struct packet_command diff --git a/include/linux/ceph/decode.h b/include/linux/ceph/decode.h index c5b6939fb32a..220ae21e819b 100644 --- a/include/linux/ceph/decode.h +++ b/include/linux/ceph/decode.h @@ -1,8 +1,9 @@ #ifndef __CEPH_DECODE_H #define __CEPH_DECODE_H -#include <asm/unaligned.h> +#include <linux/bug.h> #include <linux/time.h> +#include <asm/unaligned.h> #include "types.h" diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 95bd8502e715..e71d683982a6 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -7,6 +7,7 @@ #include <linux/backing-dev.h> #include <linux/completion.h> #include <linux/exportfs.h> +#include <linux/bug.h> #include <linux/fs.h> #include <linux/mempool.h> #include <linux/pagemap.h> @@ -207,7 +208,7 @@ extern struct kmem_cache *ceph_cap_cachep; extern struct kmem_cache *ceph_dentry_cachep; extern struct kmem_cache *ceph_file_cachep; -extern int ceph_parse_options(struct ceph_options **popt, char *options, +extern struct ceph_options *ceph_parse_options(char *options, const char *dev_name, const char *dev_name_end, int (*parse_extra_token)(char *c, void *private), void *private); diff --git a/include/linux/ceph/mdsmap.h b/include/linux/ceph/mdsmap.h index 4c5cb0880bba..9935fac8c107 100644 --- a/include/linux/ceph/mdsmap.h +++ b/include/linux/ceph/mdsmap.h @@ -1,6 +1,7 @@ #ifndef _FS_CEPH_MDSMAP_H #define _FS_CEPH_MDSMAP_H +#include <linux/bug.h> #include "types.h" /* diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index ffbeb2c217b4..3bff047f6b0f 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -14,8 +14,6 @@ struct ceph_msg; struct ceph_connection; -extern struct workqueue_struct *ceph_msgr_wq; /* receive work queue */ - /* * Ceph defines these callbacks for handling connection events. */ @@ -54,7 +52,6 @@ struct ceph_connection_operations { struct ceph_messenger { struct ceph_entity_inst inst; /* my name+address */ struct ceph_entity_addr my_enc_addr; - struct page *zero_page; /* used in certain error cases */ bool nocrc; @@ -101,7 +98,7 @@ struct ceph_msg { struct ceph_msg_pos { int page, page_pos; /* which page; offset in page */ int data_pos; /* offset in data payload */ - int did_page_crc; /* true if we've calculated crc for current page */ + bool did_page_crc; /* true if we've calculated crc for current page */ }; /* ceph connection fault delay defaults, for exponential backoff */ diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 501adb1b2f43..5a85b3415c1b 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -498,7 +498,7 @@ struct cgroup_subsys { struct list_head sibling; /* used when use_id == true */ struct idr idr; - rwlock_t id_lock; + spinlock_t id_lock; /* should be defined only by modular subsystems */ struct module *module; diff --git a/include/linux/cleancache.h b/include/linux/cleancache.h index 04ffb2e6c9d0..42e55deee757 100644 --- a/include/linux/cleancache.h +++ b/include/linux/cleancache.h @@ -28,9 +28,9 @@ struct cleancache_ops { pgoff_t, struct page *); void (*put_page)(int, struct cleancache_filekey, pgoff_t, struct page *); - void (*flush_page)(int, struct cleancache_filekey, pgoff_t); - void (*flush_inode)(int, struct cleancache_filekey); - void (*flush_fs)(int); + void (*invalidate_page)(int, struct cleancache_filekey, pgoff_t); + void (*invalidate_inode)(int, struct cleancache_filekey); + void (*invalidate_fs)(int); }; extern struct cleancache_ops @@ -39,9 +39,9 @@ extern void __cleancache_init_fs(struct super_block *); extern void __cleancache_init_shared_fs(char *, struct super_block *); extern int __cleancache_get_page(struct page *); extern void __cleancache_put_page(struct page *); -extern void __cleancache_flush_page(struct address_space *, struct page *); -extern void __cleancache_flush_inode(struct address_space *); -extern void __cleancache_flush_fs(struct super_block *); +extern void __cleancache_invalidate_page(struct address_space *, struct page *); +extern void __cleancache_invalidate_inode(struct address_space *); +extern void __cleancache_invalidate_fs(struct super_block *); extern int cleancache_enabled; #ifdef CONFIG_CLEANCACHE @@ -99,24 +99,24 @@ static inline void cleancache_put_page(struct page *page) __cleancache_put_page(page); } -static inline void cleancache_flush_page(struct address_space *mapping, +static inline void cleancache_invalidate_page(struct address_space *mapping, struct page *page) { /* careful... page->mapping is NULL sometimes when this is called */ if (cleancache_enabled && cleancache_fs_enabled_mapping(mapping)) - __cleancache_flush_page(mapping, page); + __cleancache_invalidate_page(mapping, page); } -static inline void cleancache_flush_inode(struct address_space *mapping) +static inline void cleancache_invalidate_inode(struct address_space *mapping) { if (cleancache_enabled && cleancache_fs_enabled_mapping(mapping)) - __cleancache_flush_inode(mapping); + __cleancache_invalidate_inode(mapping); } -static inline void cleancache_flush_fs(struct super_block *sb) +static inline void cleancache_invalidate_fs(struct super_block *sb) { if (cleancache_enabled) - __cleancache_flush_fs(sb); + __cleancache_invalidate_fs(sb); } #endif /* _LINUX_CLEANCACHE_H */ diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h new file mode 100644 index 000000000000..5e4312b6f5cc --- /dev/null +++ b/include/linux/clk-private.h @@ -0,0 +1,196 @@ +/* + * linux/include/linux/clk-private.h + * + * Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com> + * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_CLK_PRIVATE_H +#define __LINUX_CLK_PRIVATE_H + +#include <linux/clk-provider.h> +#include <linux/list.h> + +/* + * WARNING: Do not include clk-private.h from any file that implements struct + * clk_ops. Doing so is a layering violation! + * + * This header exists only to allow for statically initialized clock data. Any + * static clock data must be defined in a separate file from the logic that + * implements the clock operations for that same data. + */ + +#ifdef CONFIG_COMMON_CLK + +struct clk { + const char *name; + const struct clk_ops *ops; + struct clk_hw *hw; + struct clk *parent; + char **parent_names; + struct clk **parents; + u8 num_parents; + unsigned long rate; + unsigned long new_rate; + unsigned long flags; + unsigned int enable_count; + unsigned int prepare_count; + struct hlist_head children; + struct hlist_node child_node; + unsigned int notifier_count; +#ifdef CONFIG_COMMON_CLK_DEBUG + struct dentry *dentry; +#endif +}; + +/* + * DOC: Basic clock implementations common to many platforms + * + * Each basic clock hardware type is comprised of a structure describing the + * clock hardware, implementations of the relevant callbacks in struct clk_ops, + * unique flags for that hardware type, a registration function and an + * alternative macro for static initialization + */ + +extern struct clk_ops clk_fixed_rate_ops; + +#define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \ + _fixed_rate_flags) \ + static struct clk _name; \ + static char *_name##_parent_names[] = {}; \ + static struct clk_fixed_rate _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .fixed_rate = _rate, \ + .flags = _fixed_rate_flags, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_fixed_rate_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _name##_parent_names, \ + .num_parents = \ + ARRAY_SIZE(_name##_parent_names), \ + .flags = _flags, \ + }; + +extern struct clk_ops clk_gate_ops; + +#define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _bit_idx, \ + _gate_flags, _lock) \ + static struct clk _name; \ + static char *_name##_parent_names[] = { \ + _parent_name, \ + }; \ + static struct clk *_name##_parents[] = { \ + _parent_ptr, \ + }; \ + static struct clk_gate _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .reg = _reg, \ + .bit_idx = _bit_idx, \ + .flags = _gate_flags, \ + .lock = _lock, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_gate_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _name##_parent_names, \ + .num_parents = \ + ARRAY_SIZE(_name##_parent_names), \ + .parents = _name##_parents, \ + .flags = _flags, \ + }; + +extern struct clk_ops clk_divider_ops; + +#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _shift, _width, \ + _divider_flags, _lock) \ + static struct clk _name; \ + static char *_name##_parent_names[] = { \ + _parent_name, \ + }; \ + static struct clk *_name##_parents[] = { \ + _parent_ptr, \ + }; \ + static struct clk_divider _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .reg = _reg, \ + .shift = _shift, \ + .width = _width, \ + .flags = _divider_flags, \ + .lock = _lock, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_divider_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _name##_parent_names, \ + .num_parents = \ + ARRAY_SIZE(_name##_parent_names), \ + .parents = _name##_parents, \ + .flags = _flags, \ + }; + +extern struct clk_ops clk_mux_ops; + +#define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \ + _reg, _shift, _width, \ + _mux_flags, _lock) \ + static struct clk _name; \ + static struct clk_mux _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .reg = _reg, \ + .shift = _shift, \ + .width = _width, \ + .flags = _mux_flags, \ + .lock = _lock, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_mux_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _parent_names, \ + .num_parents = \ + ARRAY_SIZE(_parent_names), \ + .parents = _parents, \ + .flags = _flags, \ + }; + +/** + * __clk_init - initialize the data structures in a struct clk + * @dev: device initializing this clk, placeholder for now + * @clk: clk being initialized + * + * Initializes the lists in struct clk, queries the hardware for the + * parent and rate and sets them both. + * + * Any struct clk passed into __clk_init must have the following members + * populated: + * .name + * .ops + * .hw + * .parent_names + * .num_parents + * .flags + * + * It is not necessary to call clk_register if __clk_init is used directly with + * statically initialized clock data. + */ +void __clk_init(struct device *dev, struct clk *clk); + +#endif /* CONFIG_COMMON_CLK */ +#endif /* CLK_PRIVATE_H */ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h new file mode 100644 index 000000000000..5508897ad376 --- /dev/null +++ b/include/linux/clk-provider.h @@ -0,0 +1,300 @@ +/* + * linux/include/linux/clk-provider.h + * + * Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com> + * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_CLK_PROVIDER_H +#define __LINUX_CLK_PROVIDER_H + +#include <linux/clk.h> + +#ifdef CONFIG_COMMON_CLK + +/** + * struct clk_hw - handle for traversing from a struct clk to its corresponding + * hardware-specific structure. struct clk_hw should be declared within struct + * clk_foo and then referenced by the struct clk instance that uses struct + * clk_foo's clk_ops + * + * clk: pointer to the struct clk instance that points back to this struct + * clk_hw instance + */ +struct clk_hw { + struct clk *clk; +}; + +/* + * flags used across common struct clk. these flags should only affect the + * top-level framework. custom flags for dealing with hardware specifics + * belong in struct clk_foo + */ +#define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */ +#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */ +#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */ +#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ +#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ + +/** + * struct clk_ops - Callback operations for hardware clocks; these are to + * be provided by the clock implementation, and will be called by drivers + * through the clk_* api. + * + * @prepare: Prepare the clock for enabling. This must not return until + * the clock is fully prepared, and it's safe to call clk_enable. + * This callback is intended to allow clock implementations to + * do any initialisation that may sleep. Called with + * prepare_lock held. + * + * @unprepare: Release the clock from its prepared state. This will typically + * undo any work done in the @prepare callback. Called with + * prepare_lock held. + * + * @enable: Enable the clock atomically. This must not return until the + * clock is generating a valid clock signal, usable by consumer + * devices. Called with enable_lock held. This function must not + * sleep. + * + * @disable: Disable the clock atomically. Called with enable_lock held. + * This function must not sleep. + * + * @recalc_rate Recalculate the rate of this clock, by quering hardware. The + * parent rate is an input parameter. It is up to the caller to + * insure that the prepare_mutex is held across this call. + * Returns the calculated rate. Optional, but recommended - if + * this op is not set then clock rate will be initialized to 0. + * + * @round_rate: Given a target rate as input, returns the closest rate actually + * supported by the clock. + * + * @get_parent: Queries the hardware to determine the parent of a clock. The + * return value is a u8 which specifies the index corresponding to + * the parent clock. This index can be applied to either the + * .parent_names or .parents arrays. In short, this function + * translates the parent value read from hardware into an array + * index. Currently only called when the clock is initialized by + * __clk_init. This callback is mandatory for clocks with + * multiple parents. It is optional (and unnecessary) for clocks + * with 0 or 1 parents. + * + * @set_parent: Change the input source of this clock; for clocks with multiple + * possible parents specify a new parent by passing in the index + * as a u8 corresponding to the parent in either the .parent_names + * or .parents arrays. This function in affect translates an + * array index into the value programmed into the hardware. + * Returns 0 on success, -EERROR otherwise. + * + * @set_rate: Change the rate of this clock. If this callback returns + * CLK_SET_RATE_PARENT, the rate change will be propagated to the + * parent clock (which may propagate again if the parent clock + * also sets this flag). The requested rate of the parent is + * passed back from the callback in the second 'unsigned long *' + * argument. Note that it is up to the hardware clock's set_rate + * implementation to insure that clocks do not run out of spec + * when propgating the call to set_rate up to the parent. One way + * to do this is to gate the clock (via clk_disable and/or + * clk_unprepare) before calling clk_set_rate, then ungating it + * afterward. If your clock also has the CLK_GATE_SET_RATE flag + * set then this will insure safety. Returns 0 on success, + * -EERROR otherwise. + * + * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow + * implementations to split any work between atomic (enable) and sleepable + * (prepare) contexts. If enabling a clock requires code that might sleep, + * this must be done in clk_prepare. Clock enable code that will never be + * called in a sleepable context may be implement in clk_enable. + * + * Typically, drivers will call clk_prepare when a clock may be needed later + * (eg. when a device is opened), and clk_enable when the clock is actually + * required (eg. from an interrupt). Note that clk_prepare MUST have been + * called before clk_enable. + */ +struct clk_ops { + int (*prepare)(struct clk_hw *hw); + void (*unprepare)(struct clk_hw *hw); + int (*enable)(struct clk_hw *hw); + void (*disable)(struct clk_hw *hw); + int (*is_enabled)(struct clk_hw *hw); + unsigned long (*recalc_rate)(struct clk_hw *hw, + unsigned long parent_rate); + long (*round_rate)(struct clk_hw *hw, unsigned long, + unsigned long *); + int (*set_parent)(struct clk_hw *hw, u8 index); + u8 (*get_parent)(struct clk_hw *hw); + int (*set_rate)(struct clk_hw *hw, unsigned long); + void (*init)(struct clk_hw *hw); +}; + +/* + * DOC: Basic clock implementations common to many platforms + * + * Each basic clock hardware type is comprised of a structure describing the + * clock hardware, implementations of the relevant callbacks in struct clk_ops, + * unique flags for that hardware type, a registration function and an + * alternative macro for static initialization + */ + +/** + * struct clk_fixed_rate - fixed-rate clock + * @hw: handle between common and hardware-specific interfaces + * @fixed_rate: constant frequency of clock + */ +struct clk_fixed_rate { + struct clk_hw hw; + unsigned long fixed_rate; + u8 flags; +}; + +struct clk *clk_register_fixed_rate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + unsigned long fixed_rate); + +/** + * struct clk_gate - gating clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling gate + * @bit_idx: single bit controlling gate + * @flags: hardware-specific flags + * @lock: register lock + * + * Clock which can gate its output. Implements .enable & .disable + * + * Flags: + * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to + * enable the clock. Setting this flag does the opposite: setting the bit + * disable the clock and clearing it enables the clock + */ +struct clk_gate { + struct clk_hw hw; + void __iomem *reg; + u8 bit_idx; + u8 flags; + spinlock_t *lock; + char *parent[1]; +}; + +#define CLK_GATE_SET_TO_DISABLE BIT(0) + +struct clk *clk_register_gate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 bit_idx, + u8 clk_gate_flags, spinlock_t *lock); + +/** + * struct clk_divider - adjustable divider clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register containing the divider + * @shift: shift to the divider bit field + * @width: width of the divider bit field + * @lock: register lock + * + * Clock with an adjustable divider affecting its output frequency. Implements + * .recalc_rate, .set_rate and .round_rate + * + * Flags: + * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the + * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is + * the raw value read from the register, with the value of zero considered + * invalid + * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from + * the hardware register + */ +struct clk_divider { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u8 flags; + spinlock_t *lock; + char *parent[1]; +}; + +#define CLK_DIVIDER_ONE_BASED BIT(0) +#define CLK_DIVIDER_POWER_OF_TWO BIT(1) + +struct clk *clk_register_divider(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, spinlock_t *lock); + +/** + * struct clk_mux - multiplexer clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling multiplexer + * @shift: shift to multiplexer bit field + * @width: width of mutliplexer bit field + * @num_clks: number of parent clocks + * @lock: register lock + * + * Clock with multiple selectable parents. Implements .get_parent, .set_parent + * and .recalc_rate + * + * Flags: + * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 + * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two) + */ +struct clk_mux { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u8 flags; + spinlock_t *lock; +}; + +#define CLK_MUX_INDEX_ONE BIT(0) +#define CLK_MUX_INDEX_BIT BIT(1) + +struct clk *clk_register_mux(struct device *dev, const char *name, + char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_mux_flags, spinlock_t *lock); + +/** + * clk_register - allocate a new clock, register it and return an opaque cookie + * @dev: device that is registering this clock + * @name: clock name + * @ops: operations this clock supports + * @hw: link to hardware-specific clock data + * @parent_names: array of string names for all possible parents + * @num_parents: number of possible parents + * @flags: framework-level hints and quirks + * + * clk_register is the primary interface for populating the clock tree with new + * clock nodes. It returns a pointer to the newly allocated struct clk which + * cannot be dereferenced by driver code but may be used in conjuction with the + * rest of the clock API. + */ +struct clk *clk_register(struct device *dev, const char *name, + const struct clk_ops *ops, struct clk_hw *hw, + char **parent_names, u8 num_parents, unsigned long flags); + +/* helper functions */ +const char *__clk_get_name(struct clk *clk); +struct clk_hw *__clk_get_hw(struct clk *clk); +u8 __clk_get_num_parents(struct clk *clk); +struct clk *__clk_get_parent(struct clk *clk); +inline int __clk_get_enable_count(struct clk *clk); +inline int __clk_get_prepare_count(struct clk *clk); +unsigned long __clk_get_rate(struct clk *clk); +unsigned long __clk_get_flags(struct clk *clk); +int __clk_is_enabled(struct clk *clk); +struct clk *__clk_lookup(const char *name); + +/* + * FIXME clock api without lock protection + */ +int __clk_prepare(struct clk *clk); +void __clk_unprepare(struct clk *clk); +void __clk_reparent(struct clk *clk, struct clk *new_parent); +unsigned long __clk_round_rate(struct clk *clk, unsigned long rate); + +#endif /* CONFIG_COMMON_CLK */ +#endif /* CLK_PROVIDER_H */ diff --git a/include/linux/clk.h b/include/linux/clk.h index b9d46fa154b4..b0252726df61 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -3,6 +3,7 @@ * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. + * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,18 +13,75 @@ #define __LINUX_CLK_H #include <linux/kernel.h> +#include <linux/notifier.h> struct device; -/* - * The base API. +struct clk; + +#ifdef CONFIG_COMMON_CLK + +/** + * DOC: clk notifier callback types + * + * PRE_RATE_CHANGE - called immediately before the clk rate is changed, + * to indicate that the rate change will proceed. Drivers must + * immediately terminate any operations that will be affected by the + * rate change. Callbacks may either return NOTIFY_DONE or + * NOTIFY_STOP. + * + * ABORT_RATE_CHANGE: called if the rate change failed for some reason + * after PRE_RATE_CHANGE. In this case, all registered notifiers on + * the clk will be called with ABORT_RATE_CHANGE. Callbacks must + * always return NOTIFY_DONE. + * + * POST_RATE_CHANGE - called after the clk rate change has successfully + * completed. Callbacks must always return NOTIFY_DONE. + * */ +#define PRE_RATE_CHANGE BIT(0) +#define POST_RATE_CHANGE BIT(1) +#define ABORT_RATE_CHANGE BIT(2) +/** + * struct clk_notifier - associate a clk with a notifier + * @clk: struct clk * to associate the notifier with + * @notifier_head: a blocking_notifier_head for this clk + * @node: linked list pointers + * + * A list of struct clk_notifier is maintained by the notifier code. + * An entry is created whenever code registers the first notifier on a + * particular @clk. Future notifiers on that @clk are added to the + * @notifier_head. + */ +struct clk_notifier { + struct clk *clk; + struct srcu_notifier_head notifier_head; + struct list_head node; +}; -/* - * struct clk - an machine class defined object / cookie. +/** + * struct clk_notifier_data - rate data to pass to the notifier callback + * @clk: struct clk * being changed + * @old_rate: previous rate of this clk + * @new_rate: new rate of this clk + * + * For a pre-notifier, old_rate is the clk's rate before this rate + * change, and new_rate is what the rate will be in the future. For a + * post-notifier, old_rate and new_rate are both set to the clk's + * current rate (this was done to optimize the implementation). */ -struct clk; +struct clk_notifier_data { + struct clk *clk; + unsigned long old_rate; + unsigned long new_rate; +}; + +int clk_notifier_register(struct clk *clk, struct notifier_block *nb); + +int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); + +#endif /* !CONFIG_COMMON_CLK */ /** * clk_get - lookup and obtain a reference to a clock producer. diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h index e3d8bf26e5eb..aa629bce9033 100644 --- a/include/linux/cnt32_to_63.h +++ b/include/linux/cnt32_to_63.h @@ -16,7 +16,6 @@ #include <linux/compiler.h> #include <linux/types.h> #include <asm/byteorder.h> -#include <asm/system.h> /* this is used only to give gcc a clue about good code generation */ union cnt32_to_63 { diff --git a/include/linux/compaction.h b/include/linux/compaction.h index bb2bbdbe5464..51a90b7f2d60 100644 --- a/include/linux/compaction.h +++ b/include/linux/compaction.h @@ -23,6 +23,7 @@ extern int fragmentation_index(struct zone *zone, unsigned int order); extern unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *mask, bool sync); +extern int compact_pgdat(pg_data_t *pgdat, int order); extern unsigned long compaction_suitable(struct zone *zone, int order); /* Do not skip compaction more than 64 times */ @@ -33,20 +34,26 @@ extern unsigned long compaction_suitable(struct zone *zone, int order); * allocation success. 1 << compact_defer_limit compactions are skipped up * to a limit of 1 << COMPACT_MAX_DEFER_SHIFT */ -static inline void defer_compaction(struct zone *zone) +static inline void defer_compaction(struct zone *zone, int order) { zone->compact_considered = 0; zone->compact_defer_shift++; + if (order < zone->compact_order_failed) + zone->compact_order_failed = order; + if (zone->compact_defer_shift > COMPACT_MAX_DEFER_SHIFT) zone->compact_defer_shift = COMPACT_MAX_DEFER_SHIFT; } /* Returns true if compaction should be skipped this time */ -static inline bool compaction_deferred(struct zone *zone) +static inline bool compaction_deferred(struct zone *zone, int order) { unsigned long defer_limit = 1UL << zone->compact_defer_shift; + if (order < zone->compact_order_failed) + return false; + /* Avoid possible overflow */ if (++zone->compact_considered > defer_limit) zone->compact_considered = defer_limit; @@ -62,16 +69,21 @@ static inline unsigned long try_to_compact_pages(struct zonelist *zonelist, return COMPACT_CONTINUE; } +static inline int compact_pgdat(pg_data_t *pgdat, int order) +{ + return COMPACT_CONTINUE; +} + static inline unsigned long compaction_suitable(struct zone *zone, int order) { return COMPACT_SKIPPED; } -static inline void defer_compaction(struct zone *zone) +static inline void defer_compaction(struct zone *zone, int order) { } -static inline bool compaction_deferred(struct zone *zone) +static inline bool compaction_deferred(struct zone *zone, int order) { return 1; } diff --git a/include/linux/compat.h b/include/linux/compat.h index 7e05fcee75a1..5d46217f84ad 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -19,6 +19,10 @@ #include <asm/siginfo.h> #include <asm/signal.h> +#ifndef COMPAT_USE_64BIT_TIME +#define COMPAT_USE_64BIT_TIME 0 +#endif + #define compat_jiffies_to_clock_t(x) \ (((unsigned long)(x) * COMPAT_USER_HZ) / HZ) @@ -83,10 +87,26 @@ typedef struct { compat_sigset_word sig[_COMPAT_NSIG_WORDS]; } compat_sigset_t; +/* + * These functions operate strictly on struct compat_time* + */ extern int get_compat_timespec(struct timespec *, const struct compat_timespec __user *); extern int put_compat_timespec(const struct timespec *, struct compat_timespec __user *); +extern int get_compat_timeval(struct timeval *, + const struct compat_timeval __user *); +extern int put_compat_timeval(const struct timeval *, + struct compat_timeval __user *); +/* + * These functions operate on 32- or 64-bit specs depending on + * COMPAT_USE_64BIT_TIME, hence the void user pointer arguments and the + * naming as compat_get/put_ rather than get/put_compat_. + */ +extern int compat_get_timespec(struct timespec *, const void __user *); +extern int compat_put_timespec(const struct timespec *, void __user *); +extern int compat_get_timeval(struct timeval *, const void __user *); +extern int compat_put_timeval(const struct timeval *, void __user *); struct compat_iovec { compat_uptr_t iov_base; @@ -224,6 +244,7 @@ struct compat_sysinfo; struct compat_sysctl_args; struct compat_kexec_segment; struct compat_mq_attr; +struct compat_msgbuf; extern void compat_exit_robust_list(struct task_struct *curr); @@ -234,13 +255,22 @@ asmlinkage long compat_sys_get_robust_list(int pid, compat_uptr_t __user *head_ptr, compat_size_t __user *len_ptr); +#ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC long compat_sys_semctl(int first, int second, int third, void __user *uptr); long compat_sys_msgsnd(int first, int second, int third, void __user *uptr); long compat_sys_msgrcv(int first, int second, int msgtyp, int third, int version, void __user *uptr); -long compat_sys_msgctl(int first, int second, void __user *uptr); long compat_sys_shmat(int first, int second, compat_uptr_t third, int version, void __user *uptr); +#else +long compat_sys_semctl(int semid, int semnum, int cmd, int arg); +long compat_sys_msgsnd(int msqid, struct compat_msgbuf __user *msgp, + size_t msgsz, int msgflg); +long compat_sys_msgrcv(int msqid, struct compat_msgbuf __user *msgp, + size_t msgsz, long msgtyp, int msgflg); +long compat_sys_shmat(int shmid, compat_uptr_t shmaddr, int shmflg); +#endif +long compat_sys_msgctl(int first, int second, void __user *uptr); long compat_sys_shmctl(int first, int second, void __user *uptr); long compat_sys_semtimedop(int semid, struct sembuf __user *tsems, unsigned nsems, const struct compat_timespec __user *timeout); diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 3fd17c249221..e5834aa24b9e 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -87,7 +87,8 @@ */ #define __pure __attribute__((pure)) #define __aligned(x) __attribute__((aligned(x))) -#define __printf(a,b) __attribute__((format(printf,a,b))) +#define __printf(a, b) __attribute__((format(printf, a, b))) +#define __scanf(a, b) __attribute__((format(scanf, a, b))) #define noinline __attribute__((noinline)) #define __attribute_const__ __attribute__((__const__)) #define __maybe_unused __attribute__((unused)) diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 6e53b4823d7f..ee28844ae68e 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -14,11 +14,12 @@ #ifndef _LINUX_CPU_H_ #define _LINUX_CPU_H_ -#include <linux/device.h> #include <linux/node.h> #include <linux/compiler.h> #include <linux/cpumask.h> +struct device; + struct cpu { int node_id; /* The node which contains the CPU */ int hotpluggable; /* creates sysfs control file if hotpluggable */ diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 6216115c7789..b60f6ba01d0c 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -14,7 +14,6 @@ #include <linux/mutex.h> #include <linux/notifier.h> #include <linux/threads.h> -#include <linux/device.h> #include <linux/kobject.h> #include <linux/sysfs.h> #include <linux/completion.h> @@ -35,6 +34,7 @@ #ifdef CONFIG_CPU_FREQ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list); int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list); +extern void disable_cpufreq(void); #else /* CONFIG_CPU_FREQ */ static inline int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) @@ -46,6 +46,7 @@ static inline int cpufreq_unregister_notifier(struct notifier_block *nb, { return 0; } +static inline void disable_cpufreq(void) { } #endif /* CONFIG_CPU_FREQ */ /* if (cpufreq_driver->target) exists, the ->governor decides what frequency diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 712abcc205ae..6c26a3da0e03 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -15,6 +15,7 @@ #include <linux/list.h> #include <linux/kobject.h> #include <linux/completion.h> +#include <linux/hrtimer.h> #define CPUIDLE_STATE_MAX 8 #define CPUIDLE_NAME_LEN 16 @@ -43,12 +44,15 @@ struct cpuidle_state { unsigned int flags; unsigned int exit_latency; /* in US */ - unsigned int power_usage; /* in mW */ + int power_usage; /* in mW */ unsigned int target_residency; /* in US */ + unsigned int disable; int (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); + + int (*enter_dead) (struct cpuidle_device *dev, int index); }; /* Idle State Flags */ @@ -96,7 +100,6 @@ struct cpuidle_device { struct list_head device_list; struct kobject kobj; struct completion kobj_unregister; - void *governor_data; }; DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices); @@ -118,10 +121,12 @@ static inline int cpuidle_get_last_residency(struct cpuidle_device *dev) ****************************/ struct cpuidle_driver { - char name[CPUIDLE_NAME_LEN]; + const char *name; struct module *owner; unsigned int power_specified:1; + /* set to 1 to use the core cpuidle time keeping (for all states). */ + unsigned int en_core_tk_irqen:1; struct cpuidle_state states[CPUIDLE_STATE_MAX]; int state_count; int safe_state_index; @@ -140,6 +145,11 @@ extern void cpuidle_pause_and_lock(void); extern void cpuidle_resume_and_unlock(void); extern int cpuidle_enable_device(struct cpuidle_device *dev); extern void cpuidle_disable_device(struct cpuidle_device *dev); +extern int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)); +extern int cpuidle_play_dead(void); #else static inline void disable_cpuidle(void) { } @@ -157,6 +167,12 @@ static inline void cpuidle_resume_and_unlock(void) { } static inline int cpuidle_enable_device(struct cpuidle_device *dev) {return -ENODEV; } static inline void cpuidle_disable_device(struct cpuidle_device *dev) { } +static inline int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)) +{ return -ENODEV; } +static inline int cpuidle_play_dead(void) {return -ENODEV; } #endif diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 4f7a63237471..a2c819d3c96e 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/threads.h> #include <linux/bitmap.h> +#include <linux/bug.h> typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t; @@ -763,12 +764,6 @@ static inline const struct cpumask *get_cpu_mask(unsigned int cpu) * */ #ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -/* These strip const, as traditionally they weren't const. */ -#define cpu_possible_map (*(cpumask_t *)cpu_possible_mask) -#define cpu_online_map (*(cpumask_t *)cpu_online_mask) -#define cpu_present_map (*(cpumask_t *)cpu_present_mask) -#define cpu_active_map (*(cpumask_t *)cpu_active_mask) - #define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu)) #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS) @@ -809,11 +804,10 @@ static inline const struct cpumask *get_cpu_mask(unsigned int cpu) #else /* NR_CPUS > 1 */ int __first_cpu(const cpumask_t *srcp); int __next_cpu(int n, const cpumask_t *srcp); -int __any_online_cpu(const cpumask_t *mask); #define first_cpu(src) __first_cpu(&(src)) #define next_cpu(n, src) __next_cpu((n), &(src)) -#define any_online_cpu(mask) __any_online_cpu(&(mask)) +#define any_online_cpu(mask) cpumask_any_and(&mask, cpu_online_mask) #define for_each_cpu_mask(cpu, mask) \ for ((cpu) = -1; \ (cpu) = next_cpu((cpu), (mask)), \ diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index e9eaec522655..668f66baac7b 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -22,7 +22,7 @@ extern int cpuset_init(void); extern void cpuset_init_smp(void); extern void cpuset_update_active_cpus(void); extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask); -extern int cpuset_cpus_allowed_fallback(struct task_struct *p); +extern void cpuset_cpus_allowed_fallback(struct task_struct *p); extern nodemask_t cpuset_mems_allowed(struct task_struct *p); #define cpuset_current_mems_allowed (current->mems_allowed) void cpuset_init_current_mems_allowed(void); @@ -89,42 +89,33 @@ extern void rebuild_sched_domains(void); extern void cpuset_print_task_mems_allowed(struct task_struct *p); /* - * reading current mems_allowed and mempolicy in the fastpath must protected - * by get_mems_allowed() + * get_mems_allowed is required when making decisions involving mems_allowed + * such as during page allocation. mems_allowed can be updated in parallel + * and depending on the new value an operation can fail potentially causing + * process failure. A retry loop with get_mems_allowed and put_mems_allowed + * prevents these artificial failures. */ -static inline void get_mems_allowed(void) +static inline unsigned int get_mems_allowed(void) { - current->mems_allowed_change_disable++; - - /* - * ensure that reading mems_allowed and mempolicy happens after the - * update of ->mems_allowed_change_disable. - * - * the write-side task finds ->mems_allowed_change_disable is not 0, - * and knows the read-side task is reading mems_allowed or mempolicy, - * so it will clear old bits lazily. - */ - smp_mb(); + return read_seqcount_begin(¤t->mems_allowed_seq); } -static inline void put_mems_allowed(void) +/* + * If this returns false, the operation that took place after get_mems_allowed + * may have failed. It is up to the caller to retry the operation if + * appropriate. + */ +static inline bool put_mems_allowed(unsigned int seq) { - /* - * ensure that reading mems_allowed and mempolicy before reducing - * mems_allowed_change_disable. - * - * the write-side task will know that the read-side task is still - * reading mems_allowed or mempolicy, don't clears old bits in the - * nodemask. - */ - smp_mb(); - --ACCESS_ONCE(current->mems_allowed_change_disable); + return !read_seqcount_retry(¤t->mems_allowed_seq, seq); } static inline void set_mems_allowed(nodemask_t nodemask) { task_lock(current); + write_seqcount_begin(¤t->mems_allowed_seq); current->mems_allowed = nodemask; + write_seqcount_end(¤t->mems_allowed_seq); task_unlock(current); } @@ -144,10 +135,8 @@ static inline void cpuset_cpus_allowed(struct task_struct *p, cpumask_copy(mask, cpu_possible_mask); } -static inline int cpuset_cpus_allowed_fallback(struct task_struct *p) +static inline void cpuset_cpus_allowed_fallback(struct task_struct *p) { - do_set_cpus_allowed(p, cpu_possible_mask); - return cpumask_any(cpu_active_mask); } static inline nodemask_t cpuset_mems_allowed(struct task_struct *p) @@ -234,12 +223,14 @@ static inline void set_mems_allowed(nodemask_t nodemask) { } -static inline void get_mems_allowed(void) +static inline unsigned int get_mems_allowed(void) { + return 0; } -static inline void put_mems_allowed(void) +static inline bool put_mems_allowed(unsigned int seq) { + return true; } #endif /* !CONFIG_CPUSETS */ diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h index b936763f2236..37e4f8da7cdf 100644 --- a/include/linux/crash_dump.h +++ b/include/linux/crash_dump.h @@ -3,7 +3,6 @@ #ifdef CONFIG_CRASH_DUMP #include <linux/kexec.h> -#include <linux/device.h> #include <linux/proc_fs.h> #include <linux/elf.h> diff --git a/include/linux/crc32.h b/include/linux/crc32.h index 391a259b2cc9..68267b64bb98 100644 --- a/include/linux/crc32.h +++ b/include/linux/crc32.h @@ -11,6 +11,8 @@ extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len); extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len); +extern u32 __crc32c_le(u32 crc, unsigned char const *p, size_t len); + #define crc32(seed, data, length) crc32_le(seed, (unsigned char const *)(data), length) /* diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 48ce5479386c..b92eadf92d72 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -20,6 +20,7 @@ #include <linux/atomic.h> #include <linux/kernel.h> #include <linux/list.h> +#include <linux/bug.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/uaccess.h> diff --git a/include/linux/cryptouser.h b/include/linux/cryptouser.h index 532fb58f16bf..4abf2ea6a887 100644 --- a/include/linux/cryptouser.h +++ b/include/linux/cryptouser.h @@ -100,3 +100,6 @@ struct crypto_report_rng { char type[CRYPTO_MAX_NAME]; unsigned int seedsize; }; + +#define CRYPTO_REPORT_MAXSIZE (sizeof(struct crypto_user_alg) + \ + sizeof(struct crypto_report_blkcipher)) diff --git a/include/linux/dcache.h b/include/linux/dcache.h index ff5f5256d175..7e11f1418203 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -222,7 +222,6 @@ extern void shrink_dcache_for_umount(struct super_block *); extern int d_invalidate(struct dentry *); /* only used at mount-time */ -extern struct dentry * d_alloc_root(struct inode *); extern struct dentry * d_make_root(struct inode *); /* <clickety>-<click> the ramfs-type tree */ diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 5033fb88c107..3bd46f766751 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -3,7 +3,7 @@ #include <linux/kernel.h> #include <linux/atomic.h> -#include <asm/system.h> +#include <linux/bug.h> struct task_struct; diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index 6169c26fd8c8..ae36b72c22f3 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -86,7 +86,7 @@ struct dentry *debugfs_create_blob(const char *name, umode_t mode, struct dentry *parent, struct debugfs_blob_wrapper *blob); -struct dentry *debugfs_create_regset32(const char *name, mode_t mode, +struct dentry *debugfs_create_regset32(const char *name, umode_t mode, struct dentry *parent, struct debugfs_regset32 *regset); @@ -208,7 +208,7 @@ static inline struct dentry *debugfs_create_blob(const char *name, umode_t mode, } static inline struct dentry *debugfs_create_regset32(const char *name, - mode_t mode, struct dentry *parent, + umode_t mode, struct dentry *parent, struct debugfs_regset32 *regset) { return ERR_PTR(-ENODEV); diff --git a/include/linux/device.h b/include/linux/device.h index 7c46bc32fcbf..5ad17cccdd71 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -262,10 +262,6 @@ extern int __must_check driver_create_file(struct device_driver *driver, extern void driver_remove_file(struct device_driver *driver, const struct driver_attribute *attr); -extern int __must_check driver_add_kobj(struct device_driver *drv, - struct kobject *kobj, - const char *fmt, ...); - extern int __must_check driver_for_each_device(struct device_driver *drv, struct device *start, void *data, diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index f8ac076afa52..3efbfc2145c3 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -26,11 +26,12 @@ #include <linux/file.h> #include <linux/err.h> -#include <linux/device.h> #include <linux/scatterlist.h> #include <linux/list.h> #include <linux/dma-mapping.h> +#include <linux/fs.h> +struct device; struct dma_buf; struct dma_buf_attachment; @@ -49,6 +50,17 @@ struct dma_buf_attachment; * @unmap_dma_buf: decreases usecount of buffer, might deallocate scatter * pages. * @release: release this buffer; to be called after the last dma_buf_put. + * @begin_cpu_access: [optional] called before cpu access to invalidate cpu + * caches and allocate backing storage (if not yet done) + * respectively pin the objet into memory. + * @end_cpu_access: [optional] called after cpu access to flush cashes. + * @kmap_atomic: maps a page from the buffer into kernel address + * space, users may not block until the subsequent unmap call. + * This callback must not sleep. + * @kunmap_atomic: [optional] unmaps a atomically mapped page from the buffer. + * This Callback must not sleep. + * @kmap: maps a page from the buffer into kernel address space. + * @kunmap: [optional] unmaps a page from the buffer. */ struct dma_buf_ops { int (*attach)(struct dma_buf *, struct device *, @@ -63,7 +75,8 @@ struct dma_buf_ops { struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *, enum dma_data_direction); void (*unmap_dma_buf)(struct dma_buf_attachment *, - struct sg_table *); + struct sg_table *, + enum dma_data_direction); /* TODO: Add try_map_dma_buf version, to return immed with -EBUSY * if the call would block. */ @@ -71,6 +84,14 @@ struct dma_buf_ops { /* after final dma_buf_put() */ void (*release)(struct dma_buf *); + int (*begin_cpu_access)(struct dma_buf *, size_t, size_t, + enum dma_data_direction); + void (*end_cpu_access)(struct dma_buf *, size_t, size_t, + enum dma_data_direction); + void *(*kmap_atomic)(struct dma_buf *, unsigned long); + void (*kunmap_atomic)(struct dma_buf *, unsigned long, void *); + void *(*kmap)(struct dma_buf *, unsigned long); + void (*kunmap)(struct dma_buf *, unsigned long, void *); }; /** @@ -86,7 +107,7 @@ struct dma_buf { struct file *file; struct list_head attachments; const struct dma_buf_ops *ops; - /* mutex to serialize list manipulation and other ops */ + /* mutex to serialize list manipulation and attach/detach */ struct mutex lock; void *priv; }; @@ -109,20 +130,43 @@ struct dma_buf_attachment { void *priv; }; +/** + * get_dma_buf - convenience wrapper for get_file. + * @dmabuf: [in] pointer to dma_buf + * + * Increments the reference count on the dma-buf, needed in case of drivers + * that either need to create additional references to the dmabuf on the + * kernel side. For example, an exporter that needs to keep a dmabuf ptr + * so that subsequent exports don't create a new dmabuf. + */ +static inline void get_dma_buf(struct dma_buf *dmabuf) +{ + get_file(dmabuf->file); +} + #ifdef CONFIG_DMA_SHARED_BUFFER struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, struct device *dev); void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *dmabuf_attach); -struct dma_buf *dma_buf_export(void *priv, struct dma_buf_ops *ops, - size_t size, int flags); -int dma_buf_fd(struct dma_buf *dmabuf); +struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops, + size_t size, int flags); +int dma_buf_fd(struct dma_buf *dmabuf, int flags); struct dma_buf *dma_buf_get(int fd); void dma_buf_put(struct dma_buf *dmabuf); struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *, enum dma_data_direction); -void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *); +void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *, + enum dma_data_direction); +int dma_buf_begin_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len, + enum dma_data_direction dir); +void dma_buf_end_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len, + enum dma_data_direction dir); +void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long); +void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *); +void *dma_buf_kmap(struct dma_buf *, unsigned long); +void dma_buf_kunmap(struct dma_buf *, unsigned long, void *); #else static inline struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, @@ -138,13 +182,13 @@ static inline void dma_buf_detach(struct dma_buf *dmabuf, } static inline struct dma_buf *dma_buf_export(void *priv, - struct dma_buf_ops *ops, - size_t size, int flags) + const struct dma_buf_ops *ops, + size_t size, int flags) { return ERR_PTR(-ENODEV); } -static inline int dma_buf_fd(struct dma_buf *dmabuf) +static inline int dma_buf_fd(struct dma_buf *dmabuf, int flags) { return -ENODEV; } @@ -166,11 +210,44 @@ static inline struct sg_table *dma_buf_map_attachment( } static inline void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, - struct sg_table *sg) + struct sg_table *sg, enum dma_data_direction dir) { return; } +static inline int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, + size_t start, size_t len, + enum dma_data_direction dir) +{ + return -ENODEV; +} + +static inline void dma_buf_end_cpu_access(struct dma_buf *dmabuf, + size_t start, size_t len, + enum dma_data_direction dir) +{ +} + +static inline void *dma_buf_kmap_atomic(struct dma_buf *dmabuf, + unsigned long pnum) +{ + return NULL; +} + +static inline void dma_buf_kunmap_atomic(struct dma_buf *dmabuf, + unsigned long pnum, void *vaddr) +{ +} + +static inline void *dma_buf_kmap(struct dma_buf *dmabuf, unsigned long pnum) +{ + return NULL; +} + +static inline void dma_buf_kunmap(struct dma_buf *dmabuf, + unsigned long pnum, void *vaddr) +{ +} #endif /* CONFIG_DMA_SHARED_BUFFER */ #endif /* __DMA_BUF_H__ */ diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index e13117cbd2f7..5a736af3cc7a 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -77,7 +77,7 @@ static inline u64 dma_get_mask(struct device *dev) return DMA_BIT_MASK(32); } -#ifdef ARCH_HAS_DMA_SET_COHERENT_MASK +#ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK int dma_set_coherent_mask(struct device *dev, u64 mask); #else static inline int dma_set_coherent_mask(struct device *dev, u64 mask) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 679b349d9b66..676f967390ae 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -18,13 +18,15 @@ * The full GNU General Public License is included in this distribution in the * file called COPYING. */ -#ifndef DMAENGINE_H -#define DMAENGINE_H +#ifndef LINUX_DMAENGINE_H +#define LINUX_DMAENGINE_H #include <linux/device.h> #include <linux/uio.h> +#include <linux/bug.h> #include <linux/scatterlist.h> #include <linux/bitmap.h> +#include <linux/types.h> #include <asm/page.h> /** @@ -257,6 +259,7 @@ struct dma_chan_percpu { * struct dma_chan - devices supply DMA channels, clients use them * @device: ptr to the dma device who supplies this channel, always !%NULL * @cookie: last cookie value returned to client + * @completed_cookie: last completed cookie for this channel * @chan_id: channel ID for sysfs * @dev: class device for sysfs * @device_node: used to add this to the device chan list @@ -268,6 +271,7 @@ struct dma_chan_percpu { struct dma_chan { struct dma_device *device; dma_cookie_t cookie; + dma_cookie_t completed_cookie; /* sysfs */ int chan_id; @@ -331,6 +335,9 @@ enum dma_slave_buswidth { * may or may not be applicable on memory sources. * @dst_maxburst: same as src_maxburst but for destination target * mutatis mutandis. + * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill + * with 'true' if peripheral should be flow controller. Direction will be + * selected at Runtime. * * This struct is passed in as configuration data to a DMA engine * in order to set up a certain channel for DMA transport at runtime. @@ -357,6 +364,7 @@ struct dma_slave_config { enum dma_slave_buswidth dst_addr_width; u32 src_maxburst; u32 dst_maxburst; + bool device_fc; }; static inline const char *dma_chan_name(struct dma_chan *chan) @@ -575,10 +583,11 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_slave_sg)( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags); + unsigned long flags, void *context); struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction); + size_t period_len, enum dma_transfer_direction direction, + void *context); struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( struct dma_chan *chan, struct dma_interleaved_template *xt, unsigned long flags); @@ -612,7 +621,24 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single( struct scatterlist sg; sg_init_one(&sg, buf, len); - return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags); + return chan->device->device_prep_slave_sg(chan, &sg, 1, + dir, flags, NULL); +} + +static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, + enum dma_transfer_direction dir, unsigned long flags) +{ + return chan->device->device_prep_slave_sg(chan, sgl, sg_len, + dir, flags, NULL); +} + +static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction dir) +{ + return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len, + period_len, dir, NULL); } static inline int dmaengine_terminate_all(struct dma_chan *chan) diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h index f2c64f92c4a0..2412e02d7c0f 100644 --- a/include/linux/dw_dmac.h +++ b/include/linux/dw_dmac.h @@ -31,18 +31,6 @@ struct dw_dma_platform_data { unsigned char chan_priority; }; -/** - * enum dw_dma_slave_width - DMA slave register access width. - * @DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses - * @DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses - * @DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses - */ -enum dw_dma_slave_width { - DW_DMA_SLAVE_WIDTH_8BIT, - DW_DMA_SLAVE_WIDTH_16BIT, - DW_DMA_SLAVE_WIDTH_32BIT, -}; - /* bursts size */ enum dw_dma_msize { DW_DMA_MSIZE_1, @@ -55,47 +43,21 @@ enum dw_dma_msize { DW_DMA_MSIZE_256, }; -/* flow controller */ -enum dw_dma_fc { - DW_DMA_FC_D_M2M, - DW_DMA_FC_D_M2P, - DW_DMA_FC_D_P2M, - DW_DMA_FC_D_P2P, - DW_DMA_FC_P_P2M, - DW_DMA_FC_SP_P2P, - DW_DMA_FC_P_M2P, - DW_DMA_FC_DP_P2P, -}; - /** * struct dw_dma_slave - Controller-specific information about a slave * * @dma_dev: required DMA master device - * @tx_reg: physical address of data register used for - * memory-to-peripheral transfers - * @rx_reg: physical address of data register used for - * peripheral-to-memory transfers - * @reg_width: peripheral register width * @cfg_hi: Platform-specific initializer for the CFG_HI register * @cfg_lo: Platform-specific initializer for the CFG_LO register * @src_master: src master for transfers on allocated channel. * @dst_master: dest master for transfers on allocated channel. - * @src_msize: src burst size. - * @dst_msize: dest burst size. - * @fc: flow controller for DMA transfer */ struct dw_dma_slave { struct device *dma_dev; - dma_addr_t tx_reg; - dma_addr_t rx_reg; - enum dw_dma_slave_width reg_width; u32 cfg_hi; u32 cfg_lo; u8 src_master; u8 dst_master; - u8 src_msize; - u8 dst_msize; - u8 fc; }; /* Platform-configurable bits in CFG_HI */ diff --git a/include/linux/edac.h b/include/linux/edac.h index 1cd3947987e5..c621d762bb2c 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -13,7 +13,11 @@ #define _LINUX_EDAC_H_ #include <linux/atomic.h> -#include <linux/device.h> +#include <linux/kobject.h> +#include <linux/completion.h> +#include <linux/workqueue.h> + +struct device; #define EDAC_OPSTATE_INVAL -1 #define EDAC_OPSTATE_POLL 0 @@ -66,25 +70,64 @@ enum dev_type { #define DEV_FLAG_X32 BIT(DEV_X32) #define DEV_FLAG_X64 BIT(DEV_X64) -/* memory types */ +/** + * enum mem_type - memory types. For a more detailed reference, please see + * http://en.wikipedia.org/wiki/DRAM + * + * @MEM_EMPTY Empty csrow + * @MEM_RESERVED: Reserved csrow type + * @MEM_UNKNOWN: Unknown csrow type + * @MEM_FPM: FPM - Fast Page Mode, used on systems up to 1995. + * @MEM_EDO: EDO - Extended data out, used on systems up to 1998. + * @MEM_BEDO: BEDO - Burst Extended data out, an EDO variant. + * @MEM_SDR: SDR - Single data rate SDRAM + * http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory + * They use 3 pins for chip select: Pins 0 and 2 are + * for rank 0; pins 1 and 3 are for rank 1, if the memory + * is dual-rank. + * @MEM_RDR: Registered SDR SDRAM + * @MEM_DDR: Double data rate SDRAM + * http://en.wikipedia.org/wiki/DDR_SDRAM + * @MEM_RDDR: Registered Double data rate SDRAM + * This is a variant of the DDR memories. + * A registered memory has a buffer inside it, hiding + * part of the memory details to the memory controller. + * @MEM_RMBS: Rambus DRAM, used on a few Pentium III/IV controllers. + * @MEM_DDR2: DDR2 RAM, as described at JEDEC JESD79-2F. + * Those memories are labed as "PC2-" instead of "PC" to + * differenciate from DDR. + * @MEM_FB_DDR2: Fully-Buffered DDR2, as described at JEDEC Std No. 205 + * and JESD206. + * Those memories are accessed per DIMM slot, and not by + * a chip select signal. + * @MEM_RDDR2: Registered DDR2 RAM + * This is a variant of the DDR2 memories. + * @MEM_XDR: Rambus XDR + * It is an evolution of the original RAMBUS memories, + * created to compete with DDR2. Weren't used on any + * x86 arch, but cell_edac PPC memory controller uses it. + * @MEM_DDR3: DDR3 RAM + * @MEM_RDDR3: Registered DDR3 RAM + * This is a variant of the DDR3 memories. + */ enum mem_type { - MEM_EMPTY = 0, /* Empty csrow */ - MEM_RESERVED, /* Reserved csrow type */ - MEM_UNKNOWN, /* Unknown csrow type */ - MEM_FPM, /* Fast page mode */ - MEM_EDO, /* Extended data out */ - MEM_BEDO, /* Burst Extended data out */ - MEM_SDR, /* Single data rate SDRAM */ - MEM_RDR, /* Registered single data rate SDRAM */ - MEM_DDR, /* Double data rate SDRAM */ - MEM_RDDR, /* Registered Double data rate SDRAM */ - MEM_RMBS, /* Rambus DRAM */ - MEM_DDR2, /* DDR2 RAM */ - MEM_FB_DDR2, /* fully buffered DDR2 */ - MEM_RDDR2, /* Registered DDR2 RAM */ - MEM_XDR, /* Rambus XDR */ - MEM_DDR3, /* DDR3 RAM */ - MEM_RDDR3, /* Registered DDR3 RAM */ + MEM_EMPTY = 0, + MEM_RESERVED, + MEM_UNKNOWN, + MEM_FPM, + MEM_EDO, + MEM_BEDO, + MEM_SDR, + MEM_RDR, + MEM_DDR, + MEM_RDDR, + MEM_RMBS, + MEM_DDR2, + MEM_FB_DDR2, + MEM_RDDR2, + MEM_XDR, + MEM_DDR3, + MEM_RDDR3, }; #define MEM_FLAG_EMPTY BIT(MEM_EMPTY) @@ -162,8 +205,9 @@ enum scrub_type { #define OP_OFFLINE 0x300 /* - * There are several things to be aware of that aren't at all obvious: + * Concepts used at the EDAC subsystem * + * There are several things to be aware of that aren't at all obvious: * * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc.. * @@ -172,36 +216,61 @@ enum scrub_type { * creating a common ground for discussion, terms and their definitions * will be established. * - * Memory devices: The individual chip on a memory stick. These devices - * commonly output 4 and 8 bits each. Grouping several - * of these in parallel provides 64 bits which is common - * for a memory stick. + * Memory devices: The individual DRAM chips on a memory stick. These + * devices commonly output 4 and 8 bits each (x4, x8). + * Grouping several of these in parallel provides the + * number of bits that the memory controller expects: + * typically 72 bits, in order to provide 64 bits + + * 8 bits of ECC data. * * Memory Stick: A printed circuit board that aggregates multiple - * memory devices in parallel. This is the atomic - * memory component that is purchaseable by Joe consumer - * and loaded into a memory socket. + * memory devices in parallel. In general, this is the + * Field Replaceable Unit (FRU) which gets replaced, in + * the case of excessive errors. Most often it is also + * called DIMM (Dual Inline Memory Module). + * + * Memory Socket: A physical connector on the motherboard that accepts + * a single memory stick. Also called as "slot" on several + * datasheets. * - * Socket: A physical connector on the motherboard that accepts - * a single memory stick. + * Channel: A memory controller channel, responsible to communicate + * with a group of DIMMs. Each channel has its own + * independent control (command) and data bus, and can + * be used independently or grouped with other channels. * - * Channel: Set of memory devices on a memory stick that must be - * grouped in parallel with one or more additional - * channels from other memory sticks. This parallel - * grouping of the output from multiple channels are - * necessary for the smallest granularity of memory access. - * Some memory controllers are capable of single channel - - * which means that memory sticks can be loaded - * individually. Other memory controllers are only - * capable of dual channel - which means that memory - * sticks must be loaded as pairs (see "socket set"). + * Branch: It is typically the highest hierarchy on a + * Fully-Buffered DIMM memory controller. + * Typically, it contains two channels. + * Two channels at the same branch can be used in single + * mode or in lockstep mode. + * When lockstep is enabled, the cacheline is doubled, + * but it generally brings some performance penalty. + * Also, it is generally not possible to point to just one + * memory stick when an error occurs, as the error + * correction code is calculated using two DIMMs instead + * of one. Due to that, it is capable of correcting more + * errors than on single mode. * - * Chip-select row: All of the memory devices that are selected together. - * for a single, minimum grain of memory access. - * This selects all of the parallel memory devices across - * all of the parallel channels. Common chip-select rows - * for single channel are 64 bits, for dual channel 128 - * bits. + * Single-channel: The data accessed by the memory controller is contained + * into one dimm only. E. g. if the data is 64 bits-wide, + * the data flows to the CPU using one 64 bits parallel + * access. + * Typically used with SDR, DDR, DDR2 and DDR3 memories. + * FB-DIMM and RAMBUS use a different concept for channel, + * so this concept doesn't apply there. + * + * Double-channel: The data size accessed by the memory controller is + * interlaced into two dimms, accessed at the same time. + * E. g. if the DIMM is 64 bits-wide (72 bits with ECC), + * the data flows to the CPU using a 128 bits parallel + * access. + * + * Chip-select row: This is the name of the DRAM signal used to select the + * DRAM ranks to be accessed. Common chip-select rows for + * single channel are 64 bits, for dual channel 128 bits. + * It may not be visible by the memory controller, as some + * DIMM types have a memory buffer that can hide direct + * access to it from the Memory Controller. * * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory. * Motherboards commonly drive two chip-select pins to @@ -214,8 +283,8 @@ enum scrub_type { * * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick. * A double-sided stick has two chip-select rows which - * access different sets of memory devices. The two - * rows cannot be accessed concurrently. "Double-sided" + * access different sets of memory devices. The two + * rows cannot be accessed concurrently. "Double-sided" * is irrespective of the memory devices being mounted * on both sides of the memory stick. * @@ -243,10 +312,22 @@ enum scrub_type { * PS - I enjoyed writing all that about as much as you enjoyed reading it. */ -struct channel_info { - int chan_idx; /* channel index */ - u32 ce_count; /* Correctable Errors for this CHANNEL */ - char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ +/** + * struct rank_info - contains the information for one DIMM rank + * + * @chan_idx: channel number where the rank is (typically, 0 or 1) + * @ce_count: number of correctable errors for this rank + * @label: DIMM label. Different ranks for the same DIMM should be + * filled, on userspace, with the same label. + * FIXME: The core currently won't enforce it. + * @csrow: A pointer to the chip select row structure (the parent + * structure). The location of the rank is given by + * the (csrow->csrow_idx, chan_idx) vector. + */ +struct rank_info { + int chan_idx; + u32 ce_count; + char label[EDAC_MC_LABEL_LEN + 1]; struct csrow_info *csrow; /* the parent */ }; @@ -270,7 +351,7 @@ struct csrow_info { /* channel information for this csrow */ u32 nr_channels; - struct channel_info *channels; + struct rank_info *channels; }; struct mcidev_sysfs_group { diff --git a/include/linux/efi.h b/include/linux/efi.h index 37c300712e02..88ec80670d5f 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -22,7 +22,6 @@ #include <linux/pstore.h> #include <asm/page.h> -#include <asm/system.h> #define EFI_SUCCESS 0 #define EFI_LOAD_ERROR ( 1 | (1UL << (BITS_PER_LONG-1))) @@ -315,6 +314,16 @@ typedef efi_status_t efi_query_capsule_caps_t(efi_capsule_header_t **capsules, typedef struct { efi_guid_t guid; + u64 table; +} efi_config_table_64_t; + +typedef struct { + efi_guid_t guid; + u32 table; +} efi_config_table_32_t; + +typedef struct { + efi_guid_t guid; unsigned long table; } efi_config_table_t; @@ -329,6 +338,40 @@ typedef struct { typedef struct { efi_table_hdr_t hdr; + u64 fw_vendor; /* physical addr of CHAR16 vendor string */ + u32 fw_revision; + u32 __pad1; + u64 con_in_handle; + u64 con_in; + u64 con_out_handle; + u64 con_out; + u64 stderr_handle; + u64 stderr; + u64 runtime; + u64 boottime; + u32 nr_tables; + u32 __pad2; + u64 tables; +} efi_system_table_64_t; + +typedef struct { + efi_table_hdr_t hdr; + u32 fw_vendor; /* physical addr of CHAR16 vendor string */ + u32 fw_revision; + u32 con_in_handle; + u32 con_in; + u32 con_out_handle; + u32 con_out; + u32 stderr_handle; + u32 stderr; + u32 runtime; + u32 boottime; + u32 nr_tables; + u32 tables; +} efi_system_table_32_t; + +typedef struct { + efi_table_hdr_t hdr; unsigned long fw_vendor; /* physical addr of CHAR16 vendor string */ u32 fw_revision; unsigned long con_in_handle; @@ -497,6 +540,7 @@ extern int __init efi_setup_pcdp_console(char *); #ifdef CONFIG_EFI # ifdef CONFIG_X86 extern int efi_enabled; + extern bool efi_64bit; # else # define efi_enabled 1 # endif diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h index 394a3e0e4a6b..0698c79fbcb2 100644 --- a/include/linux/elfcore.h +++ b/include/linux/elfcore.h @@ -6,6 +6,7 @@ #include <linux/time.h> #ifdef __KERNEL__ #include <linux/user.h> +#include <linux/bug.h> #endif #include <linux/ptrace.h> #include <linux/elf.h> diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h index ce1b719e8bd4..2723e715f67a 100644 --- a/include/linux/ext2_fs.h +++ b/include/linux/ext2_fs.h @@ -18,574 +18,25 @@ #include <linux/types.h> #include <linux/magic.h> -#include <linux/fs.h> -/* - * The second extended filesystem constants/structures - */ - -/* - * Define EXT2FS_DEBUG to produce debug messages - */ -#undef EXT2FS_DEBUG - -/* - * Define EXT2_RESERVATION to reserve data blocks for expanding files - */ -#define EXT2_DEFAULT_RESERVE_BLOCKS 8 -/*max window size: 1024(direct blocks) + 3([t,d]indirect blocks) */ -#define EXT2_MAX_RESERVE_BLOCKS 1027 -#define EXT2_RESERVE_WINDOW_NOT_ALLOCATED 0 -/* - * The second extended file system version - */ -#define EXT2FS_DATE "95/08/09" -#define EXT2FS_VERSION "0.5b" - -/* - * Debug code - */ -#ifdef EXT2FS_DEBUG -# define ext2_debug(f, a...) { \ - printk ("EXT2-fs DEBUG (%s, %d): %s:", \ - __FILE__, __LINE__, __func__); \ - printk (f, ## a); \ - } -#else -# define ext2_debug(f, a...) /**/ -#endif - -/* - * Special inode numbers - */ -#define EXT2_BAD_INO 1 /* Bad blocks inode */ -#define EXT2_ROOT_INO 2 /* Root inode */ -#define EXT2_BOOT_LOADER_INO 5 /* Boot loader inode */ -#define EXT2_UNDEL_DIR_INO 6 /* Undelete directory inode */ - -/* First non-reserved inode for old ext2 filesystems */ -#define EXT2_GOOD_OLD_FIRST_INO 11 - -#ifdef __KERNEL__ -#include <linux/ext2_fs_sb.h> -static inline struct ext2_sb_info *EXT2_SB(struct super_block *sb) -{ - return sb->s_fs_info; -} -#else -/* Assume that user mode programs are passing in an ext2fs superblock, not - * a kernel struct super_block. This will allow us to call the feature-test - * macros from user land. */ -#define EXT2_SB(sb) (sb) -#endif +#define EXT2_NAME_LEN 255 /* * Maximal count of links to a file */ #define EXT2_LINK_MAX 32000 -/* - * Macro-instructions used to manage several block sizes - */ -#define EXT2_MIN_BLOCK_SIZE 1024 -#define EXT2_MAX_BLOCK_SIZE 4096 -#define EXT2_MIN_BLOCK_LOG_SIZE 10 -#ifdef __KERNEL__ -# define EXT2_BLOCK_SIZE(s) ((s)->s_blocksize) -#else -# define EXT2_BLOCK_SIZE(s) (EXT2_MIN_BLOCK_SIZE << (s)->s_log_block_size) -#endif -#define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (__u32)) -#ifdef __KERNEL__ -# define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits) -#else -# define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10) -#endif -#ifdef __KERNEL__ -#define EXT2_ADDR_PER_BLOCK_BITS(s) (EXT2_SB(s)->s_addr_per_block_bits) -#define EXT2_INODE_SIZE(s) (EXT2_SB(s)->s_inode_size) -#define EXT2_FIRST_INO(s) (EXT2_SB(s)->s_first_ino) -#else -#define EXT2_INODE_SIZE(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \ - EXT2_GOOD_OLD_INODE_SIZE : \ - (s)->s_inode_size) -#define EXT2_FIRST_INO(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \ - EXT2_GOOD_OLD_FIRST_INO : \ - (s)->s_first_ino) -#endif +#define EXT2_SB_MAGIC_OFFSET 0x38 +#define EXT2_SB_BLOCKS_OFFSET 0x04 +#define EXT2_SB_BSIZE_OFFSET 0x18 -/* - * Macro-instructions used to manage fragments - */ -#define EXT2_MIN_FRAG_SIZE 1024 -#define EXT2_MAX_FRAG_SIZE 4096 -#define EXT2_MIN_FRAG_LOG_SIZE 10 -#ifdef __KERNEL__ -# define EXT2_FRAG_SIZE(s) (EXT2_SB(s)->s_frag_size) -# define EXT2_FRAGS_PER_BLOCK(s) (EXT2_SB(s)->s_frags_per_block) -#else -# define EXT2_FRAG_SIZE(s) (EXT2_MIN_FRAG_SIZE << (s)->s_log_frag_size) -# define EXT2_FRAGS_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / EXT2_FRAG_SIZE(s)) -#endif - -/* - * Structure of a blocks group descriptor - */ -struct ext2_group_desc +static inline u64 ext2_image_size(void *ext2_sb) { - __le32 bg_block_bitmap; /* Blocks bitmap block */ - __le32 bg_inode_bitmap; /* Inodes bitmap block */ - __le32 bg_inode_table; /* Inodes table block */ - __le16 bg_free_blocks_count; /* Free blocks count */ - __le16 bg_free_inodes_count; /* Free inodes count */ - __le16 bg_used_dirs_count; /* Directories count */ - __le16 bg_pad; - __le32 bg_reserved[3]; -}; - -/* - * Macro-instructions used to manage group descriptors - */ -#ifdef __KERNEL__ -# define EXT2_BLOCKS_PER_GROUP(s) (EXT2_SB(s)->s_blocks_per_group) -# define EXT2_DESC_PER_BLOCK(s) (EXT2_SB(s)->s_desc_per_block) -# define EXT2_INODES_PER_GROUP(s) (EXT2_SB(s)->s_inodes_per_group) -# define EXT2_DESC_PER_BLOCK_BITS(s) (EXT2_SB(s)->s_desc_per_block_bits) -#else -# define EXT2_BLOCKS_PER_GROUP(s) ((s)->s_blocks_per_group) -# define EXT2_DESC_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (struct ext2_group_desc)) -# define EXT2_INODES_PER_GROUP(s) ((s)->s_inodes_per_group) -#endif - -/* - * Constants relative to the data blocks - */ -#define EXT2_NDIR_BLOCKS 12 -#define EXT2_IND_BLOCK EXT2_NDIR_BLOCKS -#define EXT2_DIND_BLOCK (EXT2_IND_BLOCK + 1) -#define EXT2_TIND_BLOCK (EXT2_DIND_BLOCK + 1) -#define EXT2_N_BLOCKS (EXT2_TIND_BLOCK + 1) - -/* - * Inode flags (GETFLAGS/SETFLAGS) - */ -#define EXT2_SECRM_FL FS_SECRM_FL /* Secure deletion */ -#define EXT2_UNRM_FL FS_UNRM_FL /* Undelete */ -#define EXT2_COMPR_FL FS_COMPR_FL /* Compress file */ -#define EXT2_SYNC_FL FS_SYNC_FL /* Synchronous updates */ -#define EXT2_IMMUTABLE_FL FS_IMMUTABLE_FL /* Immutable file */ -#define EXT2_APPEND_FL FS_APPEND_FL /* writes to file may only append */ -#define EXT2_NODUMP_FL FS_NODUMP_FL /* do not dump file */ -#define EXT2_NOATIME_FL FS_NOATIME_FL /* do not update atime */ -/* Reserved for compression usage... */ -#define EXT2_DIRTY_FL FS_DIRTY_FL -#define EXT2_COMPRBLK_FL FS_COMPRBLK_FL /* One or more compressed clusters */ -#define EXT2_NOCOMP_FL FS_NOCOMP_FL /* Don't compress */ -#define EXT2_ECOMPR_FL FS_ECOMPR_FL /* Compression error */ -/* End compression flags --- maybe not all used */ -#define EXT2_BTREE_FL FS_BTREE_FL /* btree format dir */ -#define EXT2_INDEX_FL FS_INDEX_FL /* hash-indexed directory */ -#define EXT2_IMAGIC_FL FS_IMAGIC_FL /* AFS directory */ -#define EXT2_JOURNAL_DATA_FL FS_JOURNAL_DATA_FL /* Reserved for ext3 */ -#define EXT2_NOTAIL_FL FS_NOTAIL_FL /* file tail should not be merged */ -#define EXT2_DIRSYNC_FL FS_DIRSYNC_FL /* dirsync behaviour (directories only) */ -#define EXT2_TOPDIR_FL FS_TOPDIR_FL /* Top of directory hierarchies*/ -#define EXT2_RESERVED_FL FS_RESERVED_FL /* reserved for ext2 lib */ - -#define EXT2_FL_USER_VISIBLE FS_FL_USER_VISIBLE /* User visible flags */ -#define EXT2_FL_USER_MODIFIABLE FS_FL_USER_MODIFIABLE /* User modifiable flags */ - -/* Flags that should be inherited by new inodes from their parent. */ -#define EXT2_FL_INHERITED (EXT2_SECRM_FL | EXT2_UNRM_FL | EXT2_COMPR_FL |\ - EXT2_SYNC_FL | EXT2_NODUMP_FL |\ - EXT2_NOATIME_FL | EXT2_COMPRBLK_FL |\ - EXT2_NOCOMP_FL | EXT2_JOURNAL_DATA_FL |\ - EXT2_NOTAIL_FL | EXT2_DIRSYNC_FL) - -/* Flags that are appropriate for regular files (all but dir-specific ones). */ -#define EXT2_REG_FLMASK (~(EXT2_DIRSYNC_FL | EXT2_TOPDIR_FL)) - -/* Flags that are appropriate for non-directories/regular files. */ -#define EXT2_OTHER_FLMASK (EXT2_NODUMP_FL | EXT2_NOATIME_FL) - -/* Mask out flags that are inappropriate for the given type of inode. */ -static inline __u32 ext2_mask_flags(umode_t mode, __u32 flags) -{ - if (S_ISDIR(mode)) - return flags; - else if (S_ISREG(mode)) - return flags & EXT2_REG_FLMASK; - else - return flags & EXT2_OTHER_FLMASK; + __u8 *p = ext2_sb; + if (*(__le16 *)(p + EXT2_SB_MAGIC_OFFSET) != cpu_to_le16(EXT2_SUPER_MAGIC)) + return 0; + return (u64)le32_to_cpup((__le32 *)(p + EXT2_SB_BLOCKS_OFFSET)) << + le32_to_cpup((__le32 *)(p + EXT2_SB_BSIZE_OFFSET)); } -/* - * ioctl commands - */ -#define EXT2_IOC_GETFLAGS FS_IOC_GETFLAGS -#define EXT2_IOC_SETFLAGS FS_IOC_SETFLAGS -#define EXT2_IOC_GETVERSION FS_IOC_GETVERSION -#define EXT2_IOC_SETVERSION FS_IOC_SETVERSION -#define EXT2_IOC_GETRSVSZ _IOR('f', 5, long) -#define EXT2_IOC_SETRSVSZ _IOW('f', 6, long) - -/* - * ioctl commands in 32 bit emulation - */ -#define EXT2_IOC32_GETFLAGS FS_IOC32_GETFLAGS -#define EXT2_IOC32_SETFLAGS FS_IOC32_SETFLAGS -#define EXT2_IOC32_GETVERSION FS_IOC32_GETVERSION -#define EXT2_IOC32_SETVERSION FS_IOC32_SETVERSION - -/* - * Structure of an inode on the disk - */ -struct ext2_inode { - __le16 i_mode; /* File mode */ - __le16 i_uid; /* Low 16 bits of Owner Uid */ - __le32 i_size; /* Size in bytes */ - __le32 i_atime; /* Access time */ - __le32 i_ctime; /* Creation time */ - __le32 i_mtime; /* Modification time */ - __le32 i_dtime; /* Deletion Time */ - __le16 i_gid; /* Low 16 bits of Group Id */ - __le16 i_links_count; /* Links count */ - __le32 i_blocks; /* Blocks count */ - __le32 i_flags; /* File flags */ - union { - struct { - __le32 l_i_reserved1; - } linux1; - struct { - __le32 h_i_translator; - } hurd1; - struct { - __le32 m_i_reserved1; - } masix1; - } osd1; /* OS dependent 1 */ - __le32 i_block[EXT2_N_BLOCKS];/* Pointers to blocks */ - __le32 i_generation; /* File version (for NFS) */ - __le32 i_file_acl; /* File ACL */ - __le32 i_dir_acl; /* Directory ACL */ - __le32 i_faddr; /* Fragment address */ - union { - struct { - __u8 l_i_frag; /* Fragment number */ - __u8 l_i_fsize; /* Fragment size */ - __u16 i_pad1; - __le16 l_i_uid_high; /* these 2 fields */ - __le16 l_i_gid_high; /* were reserved2[0] */ - __u32 l_i_reserved2; - } linux2; - struct { - __u8 h_i_frag; /* Fragment number */ - __u8 h_i_fsize; /* Fragment size */ - __le16 h_i_mode_high; - __le16 h_i_uid_high; - __le16 h_i_gid_high; - __le32 h_i_author; - } hurd2; - struct { - __u8 m_i_frag; /* Fragment number */ - __u8 m_i_fsize; /* Fragment size */ - __u16 m_pad1; - __u32 m_i_reserved2[2]; - } masix2; - } osd2; /* OS dependent 2 */ -}; - -#define i_size_high i_dir_acl - -#if defined(__KERNEL__) || defined(__linux__) -#define i_reserved1 osd1.linux1.l_i_reserved1 -#define i_frag osd2.linux2.l_i_frag -#define i_fsize osd2.linux2.l_i_fsize -#define i_uid_low i_uid -#define i_gid_low i_gid -#define i_uid_high osd2.linux2.l_i_uid_high -#define i_gid_high osd2.linux2.l_i_gid_high -#define i_reserved2 osd2.linux2.l_i_reserved2 -#endif - -#ifdef __hurd__ -#define i_translator osd1.hurd1.h_i_translator -#define i_frag osd2.hurd2.h_i_frag -#define i_fsize osd2.hurd2.h_i_fsize -#define i_uid_high osd2.hurd2.h_i_uid_high -#define i_gid_high osd2.hurd2.h_i_gid_high -#define i_author osd2.hurd2.h_i_author -#endif - -#ifdef __masix__ -#define i_reserved1 osd1.masix1.m_i_reserved1 -#define i_frag osd2.masix2.m_i_frag -#define i_fsize osd2.masix2.m_i_fsize -#define i_reserved2 osd2.masix2.m_i_reserved2 -#endif - -/* - * File system states - */ -#define EXT2_VALID_FS 0x0001 /* Unmounted cleanly */ -#define EXT2_ERROR_FS 0x0002 /* Errors detected */ - -/* - * Mount flags - */ -#define EXT2_MOUNT_CHECK 0x000001 /* Do mount-time checks */ -#define EXT2_MOUNT_OLDALLOC 0x000002 /* Don't use the new Orlov allocator */ -#define EXT2_MOUNT_GRPID 0x000004 /* Create files with directory's group */ -#define EXT2_MOUNT_DEBUG 0x000008 /* Some debugging messages */ -#define EXT2_MOUNT_ERRORS_CONT 0x000010 /* Continue on errors */ -#define EXT2_MOUNT_ERRORS_RO 0x000020 /* Remount fs ro on errors */ -#define EXT2_MOUNT_ERRORS_PANIC 0x000040 /* Panic on errors */ -#define EXT2_MOUNT_MINIX_DF 0x000080 /* Mimics the Minix statfs */ -#define EXT2_MOUNT_NOBH 0x000100 /* No buffer_heads */ -#define EXT2_MOUNT_NO_UID32 0x000200 /* Disable 32-bit UIDs */ -#define EXT2_MOUNT_XATTR_USER 0x004000 /* Extended user attributes */ -#define EXT2_MOUNT_POSIX_ACL 0x008000 /* POSIX Access Control Lists */ -#define EXT2_MOUNT_XIP 0x010000 /* Execute in place */ -#define EXT2_MOUNT_USRQUOTA 0x020000 /* user quota */ -#define EXT2_MOUNT_GRPQUOTA 0x040000 /* group quota */ -#define EXT2_MOUNT_RESERVATION 0x080000 /* Preallocation */ - - -#define clear_opt(o, opt) o &= ~EXT2_MOUNT_##opt -#define set_opt(o, opt) o |= EXT2_MOUNT_##opt -#define test_opt(sb, opt) (EXT2_SB(sb)->s_mount_opt & \ - EXT2_MOUNT_##opt) -/* - * Maximal mount counts between two filesystem checks - */ -#define EXT2_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */ -#define EXT2_DFL_CHECKINTERVAL 0 /* Don't use interval check */ - -/* - * Behaviour when detecting errors - */ -#define EXT2_ERRORS_CONTINUE 1 /* Continue execution */ -#define EXT2_ERRORS_RO 2 /* Remount fs read-only */ -#define EXT2_ERRORS_PANIC 3 /* Panic */ -#define EXT2_ERRORS_DEFAULT EXT2_ERRORS_CONTINUE - -/* - * Structure of the super block - */ -struct ext2_super_block { - __le32 s_inodes_count; /* Inodes count */ - __le32 s_blocks_count; /* Blocks count */ - __le32 s_r_blocks_count; /* Reserved blocks count */ - __le32 s_free_blocks_count; /* Free blocks count */ - __le32 s_free_inodes_count; /* Free inodes count */ - __le32 s_first_data_block; /* First Data Block */ - __le32 s_log_block_size; /* Block size */ - __le32 s_log_frag_size; /* Fragment size */ - __le32 s_blocks_per_group; /* # Blocks per group */ - __le32 s_frags_per_group; /* # Fragments per group */ - __le32 s_inodes_per_group; /* # Inodes per group */ - __le32 s_mtime; /* Mount time */ - __le32 s_wtime; /* Write time */ - __le16 s_mnt_count; /* Mount count */ - __le16 s_max_mnt_count; /* Maximal mount count */ - __le16 s_magic; /* Magic signature */ - __le16 s_state; /* File system state */ - __le16 s_errors; /* Behaviour when detecting errors */ - __le16 s_minor_rev_level; /* minor revision level */ - __le32 s_lastcheck; /* time of last check */ - __le32 s_checkinterval; /* max. time between checks */ - __le32 s_creator_os; /* OS */ - __le32 s_rev_level; /* Revision level */ - __le16 s_def_resuid; /* Default uid for reserved blocks */ - __le16 s_def_resgid; /* Default gid for reserved blocks */ - /* - * These fields are for EXT2_DYNAMIC_REV superblocks only. - * - * Note: the difference between the compatible feature set and - * the incompatible feature set is that if there is a bit set - * in the incompatible feature set that the kernel doesn't - * know about, it should refuse to mount the filesystem. - * - * e2fsck's requirements are more strict; if it doesn't know - * about a feature in either the compatible or incompatible - * feature set, it must abort and not try to meddle with - * things it doesn't understand... - */ - __le32 s_first_ino; /* First non-reserved inode */ - __le16 s_inode_size; /* size of inode structure */ - __le16 s_block_group_nr; /* block group # of this superblock */ - __le32 s_feature_compat; /* compatible feature set */ - __le32 s_feature_incompat; /* incompatible feature set */ - __le32 s_feature_ro_compat; /* readonly-compatible feature set */ - __u8 s_uuid[16]; /* 128-bit uuid for volume */ - char s_volume_name[16]; /* volume name */ - char s_last_mounted[64]; /* directory where last mounted */ - __le32 s_algorithm_usage_bitmap; /* For compression */ - /* - * Performance hints. Directory preallocation should only - * happen if the EXT2_COMPAT_PREALLOC flag is on. - */ - __u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/ - __u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */ - __u16 s_padding1; - /* - * Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set. - */ - __u8 s_journal_uuid[16]; /* uuid of journal superblock */ - __u32 s_journal_inum; /* inode number of journal file */ - __u32 s_journal_dev; /* device number of journal file */ - __u32 s_last_orphan; /* start of list of inodes to delete */ - __u32 s_hash_seed[4]; /* HTREE hash seed */ - __u8 s_def_hash_version; /* Default hash version to use */ - __u8 s_reserved_char_pad; - __u16 s_reserved_word_pad; - __le32 s_default_mount_opts; - __le32 s_first_meta_bg; /* First metablock block group */ - __u32 s_reserved[190]; /* Padding to the end of the block */ -}; - -/* - * Codes for operating systems - */ -#define EXT2_OS_LINUX 0 -#define EXT2_OS_HURD 1 -#define EXT2_OS_MASIX 2 -#define EXT2_OS_FREEBSD 3 -#define EXT2_OS_LITES 4 - -/* - * Revision levels - */ -#define EXT2_GOOD_OLD_REV 0 /* The good old (original) format */ -#define EXT2_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */ - -#define EXT2_CURRENT_REV EXT2_GOOD_OLD_REV -#define EXT2_MAX_SUPP_REV EXT2_DYNAMIC_REV - -#define EXT2_GOOD_OLD_INODE_SIZE 128 - -/* - * Feature set definitions - */ - -#define EXT2_HAS_COMPAT_FEATURE(sb,mask) \ - ( EXT2_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) ) -#define EXT2_HAS_RO_COMPAT_FEATURE(sb,mask) \ - ( EXT2_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) ) -#define EXT2_HAS_INCOMPAT_FEATURE(sb,mask) \ - ( EXT2_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) ) -#define EXT2_SET_COMPAT_FEATURE(sb,mask) \ - EXT2_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask) -#define EXT2_SET_RO_COMPAT_FEATURE(sb,mask) \ - EXT2_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask) -#define EXT2_SET_INCOMPAT_FEATURE(sb,mask) \ - EXT2_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask) -#define EXT2_CLEAR_COMPAT_FEATURE(sb,mask) \ - EXT2_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask) -#define EXT2_CLEAR_RO_COMPAT_FEATURE(sb,mask) \ - EXT2_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask) -#define EXT2_CLEAR_INCOMPAT_FEATURE(sb,mask) \ - EXT2_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask) - -#define EXT2_FEATURE_COMPAT_DIR_PREALLOC 0x0001 -#define EXT2_FEATURE_COMPAT_IMAGIC_INODES 0x0002 -#define EXT3_FEATURE_COMPAT_HAS_JOURNAL 0x0004 -#define EXT2_FEATURE_COMPAT_EXT_ATTR 0x0008 -#define EXT2_FEATURE_COMPAT_RESIZE_INO 0x0010 -#define EXT2_FEATURE_COMPAT_DIR_INDEX 0x0020 -#define EXT2_FEATURE_COMPAT_ANY 0xffffffff - -#define EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001 -#define EXT2_FEATURE_RO_COMPAT_LARGE_FILE 0x0002 -#define EXT2_FEATURE_RO_COMPAT_BTREE_DIR 0x0004 -#define EXT2_FEATURE_RO_COMPAT_ANY 0xffffffff - -#define EXT2_FEATURE_INCOMPAT_COMPRESSION 0x0001 -#define EXT2_FEATURE_INCOMPAT_FILETYPE 0x0002 -#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 -#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV 0x0008 -#define EXT2_FEATURE_INCOMPAT_META_BG 0x0010 -#define EXT2_FEATURE_INCOMPAT_ANY 0xffffffff - -#define EXT2_FEATURE_COMPAT_SUPP EXT2_FEATURE_COMPAT_EXT_ATTR -#define EXT2_FEATURE_INCOMPAT_SUPP (EXT2_FEATURE_INCOMPAT_FILETYPE| \ - EXT2_FEATURE_INCOMPAT_META_BG) -#define EXT2_FEATURE_RO_COMPAT_SUPP (EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER| \ - EXT2_FEATURE_RO_COMPAT_LARGE_FILE| \ - EXT2_FEATURE_RO_COMPAT_BTREE_DIR) -#define EXT2_FEATURE_RO_COMPAT_UNSUPPORTED ~EXT2_FEATURE_RO_COMPAT_SUPP -#define EXT2_FEATURE_INCOMPAT_UNSUPPORTED ~EXT2_FEATURE_INCOMPAT_SUPP - -/* - * Default values for user and/or group using reserved blocks - */ -#define EXT2_DEF_RESUID 0 -#define EXT2_DEF_RESGID 0 - -/* - * Default mount options - */ -#define EXT2_DEFM_DEBUG 0x0001 -#define EXT2_DEFM_BSDGROUPS 0x0002 -#define EXT2_DEFM_XATTR_USER 0x0004 -#define EXT2_DEFM_ACL 0x0008 -#define EXT2_DEFM_UID16 0x0010 - /* Not used by ext2, but reserved for use by ext3 */ -#define EXT3_DEFM_JMODE 0x0060 -#define EXT3_DEFM_JMODE_DATA 0x0020 -#define EXT3_DEFM_JMODE_ORDERED 0x0040 -#define EXT3_DEFM_JMODE_WBACK 0x0060 - -/* - * Structure of a directory entry - */ -#define EXT2_NAME_LEN 255 - -struct ext2_dir_entry { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __le16 name_len; /* Name length */ - char name[EXT2_NAME_LEN]; /* File name */ -}; - -/* - * The new version of the directory entry. Since EXT2 structures are - * stored in intel byte order, and the name_len field could never be - * bigger than 255 chars, it's safe to reclaim the extra byte for the - * file_type field. - */ -struct ext2_dir_entry_2 { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __u8 name_len; /* Name length */ - __u8 file_type; - char name[EXT2_NAME_LEN]; /* File name */ -}; - -/* - * Ext2 directory file types. Only the low 3 bits are used. The - * other bits are reserved for now. - */ -enum { - EXT2_FT_UNKNOWN = 0, - EXT2_FT_REG_FILE = 1, - EXT2_FT_DIR = 2, - EXT2_FT_CHRDEV = 3, - EXT2_FT_BLKDEV = 4, - EXT2_FT_FIFO = 5, - EXT2_FT_SOCK = 6, - EXT2_FT_SYMLINK = 7, - EXT2_FT_MAX -}; - -/* - * EXT2_DIR_PAD defines the directory entries boundaries - * - * NOTE: It must be a multiple of 4 - */ -#define EXT2_DIR_PAD 4 -#define EXT2_DIR_ROUND (EXT2_DIR_PAD - 1) -#define EXT2_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT2_DIR_ROUND) & \ - ~EXT2_DIR_ROUND) -#define EXT2_MAX_REC_LEN ((1<<16)-1) - #endif /* _LINUX_EXT2_FS_H */ diff --git a/include/linux/ext2_fs_sb.h b/include/linux/ext2_fs_sb.h deleted file mode 100644 index db4d9f586bb6..000000000000 --- a/include/linux/ext2_fs_sb.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * linux/include/linux/ext2_fs_sb.h - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/include/linux/minix_fs_sb.h - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#ifndef _LINUX_EXT2_FS_SB -#define _LINUX_EXT2_FS_SB - -#include <linux/blockgroup_lock.h> -#include <linux/percpu_counter.h> -#include <linux/rbtree.h> - -/* XXX Here for now... not interested in restructing headers JUST now */ - -/* data type for block offset of block group */ -typedef int ext2_grpblk_t; - -/* data type for filesystem-wide blocks number */ -typedef unsigned long ext2_fsblk_t; - -#define E2FSBLK "%lu" - -struct ext2_reserve_window { - ext2_fsblk_t _rsv_start; /* First byte reserved */ - ext2_fsblk_t _rsv_end; /* Last byte reserved or 0 */ -}; - -struct ext2_reserve_window_node { - struct rb_node rsv_node; - __u32 rsv_goal_size; - __u32 rsv_alloc_hit; - struct ext2_reserve_window rsv_window; -}; - -struct ext2_block_alloc_info { - /* information about reservation window */ - struct ext2_reserve_window_node rsv_window_node; - /* - * was i_next_alloc_block in ext2_inode_info - * is the logical (file-relative) number of the - * most-recently-allocated block in this file. - * We use this for detecting linearly ascending allocation requests. - */ - __u32 last_alloc_logical_block; - /* - * Was i_next_alloc_goal in ext2_inode_info - * is the *physical* companion to i_next_alloc_block. - * it the the physical block number of the block which was most-recentl - * allocated to this file. This give us the goal (target) for the next - * allocation when we detect linearly ascending requests. - */ - ext2_fsblk_t last_alloc_physical_block; -}; - -#define rsv_start rsv_window._rsv_start -#define rsv_end rsv_window._rsv_end - -/* - * second extended-fs super-block data in memory - */ -struct ext2_sb_info { - unsigned long s_frag_size; /* Size of a fragment in bytes */ - unsigned long s_frags_per_block;/* Number of fragments per block */ - unsigned long s_inodes_per_block;/* Number of inodes per block */ - unsigned long s_frags_per_group;/* Number of fragments in a group */ - unsigned long s_blocks_per_group;/* Number of blocks in a group */ - unsigned long s_inodes_per_group;/* Number of inodes in a group */ - unsigned long s_itb_per_group; /* Number of inode table blocks per group */ - unsigned long s_gdb_count; /* Number of group descriptor blocks */ - unsigned long s_desc_per_block; /* Number of group descriptors per block */ - unsigned long s_groups_count; /* Number of groups in the fs */ - unsigned long s_overhead_last; /* Last calculated overhead */ - unsigned long s_blocks_last; /* Last seen block count */ - struct buffer_head * s_sbh; /* Buffer containing the super block */ - struct ext2_super_block * s_es; /* Pointer to the super block in the buffer */ - struct buffer_head ** s_group_desc; - unsigned long s_mount_opt; - unsigned long s_sb_block; - uid_t s_resuid; - gid_t s_resgid; - unsigned short s_mount_state; - unsigned short s_pad; - int s_addr_per_block_bits; - int s_desc_per_block_bits; - int s_inode_size; - int s_first_ino; - spinlock_t s_next_gen_lock; - u32 s_next_generation; - unsigned long s_dir_count; - u8 *s_debts; - struct percpu_counter s_freeblocks_counter; - struct percpu_counter s_freeinodes_counter; - struct percpu_counter s_dirs_counter; - struct blockgroup_lock *s_blockgroup_lock; - /* root of the per fs reservation window tree */ - spinlock_t s_rsv_window_lock; - struct rb_root s_rsv_window_root; - struct ext2_reserve_window_node s_rsv_window_head; - /* - * s_lock protects against concurrent modifications of s_mount_state, - * s_blocks_last, s_overhead_last and the content of superblock's - * buffer pointed to by sbi->s_es. - * - * Note: It is used in ext2_show_options() to provide a consistent view - * of the mount options. - */ - spinlock_t s_lock; -}; - -static inline spinlock_t * -sb_bgl_lock(struct ext2_sb_info *sbi, unsigned int block_group) -{ - return bgl_lock_ptr(sbi->s_blockgroup_lock, block_group); -} - -#endif /* _LINUX_EXT2_FS_SB */ diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h deleted file mode 100644 index f957085d40ed..000000000000 --- a/include/linux/ext3_fs.h +++ /dev/null @@ -1,979 +0,0 @@ -/* - * linux/include/linux/ext3_fs.h - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/include/linux/minix_fs.h - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#ifndef _LINUX_EXT3_FS_H -#define _LINUX_EXT3_FS_H - -#include <linux/types.h> -#include <linux/magic.h> - -/* - * The second extended filesystem constants/structures - */ - -/* - * Define EXT3FS_DEBUG to produce debug messages - */ -#undef EXT3FS_DEBUG - -/* - * Define EXT3_RESERVATION to reserve data blocks for expanding files - */ -#define EXT3_DEFAULT_RESERVE_BLOCKS 8 -/*max window size: 1024(direct blocks) + 3([t,d]indirect blocks) */ -#define EXT3_MAX_RESERVE_BLOCKS 1027 -#define EXT3_RESERVE_WINDOW_NOT_ALLOCATED 0 - -/* - * Debug code - */ -#ifdef EXT3FS_DEBUG -#define ext3_debug(f, a...) \ - do { \ - printk (KERN_DEBUG "EXT3-fs DEBUG (%s, %d): %s:", \ - __FILE__, __LINE__, __func__); \ - printk (KERN_DEBUG f, ## a); \ - } while (0) -#else -#define ext3_debug(f, a...) do {} while (0) -#endif - -/* - * Special inodes numbers - */ -#define EXT3_BAD_INO 1 /* Bad blocks inode */ -#define EXT3_ROOT_INO 2 /* Root inode */ -#define EXT3_BOOT_LOADER_INO 5 /* Boot loader inode */ -#define EXT3_UNDEL_DIR_INO 6 /* Undelete directory inode */ -#define EXT3_RESIZE_INO 7 /* Reserved group descriptors inode */ -#define EXT3_JOURNAL_INO 8 /* Journal inode */ - -/* First non-reserved inode for old ext3 filesystems */ -#define EXT3_GOOD_OLD_FIRST_INO 11 - -/* - * Maximal count of links to a file - */ -#define EXT3_LINK_MAX 32000 - -/* - * Macro-instructions used to manage several block sizes - */ -#define EXT3_MIN_BLOCK_SIZE 1024 -#define EXT3_MAX_BLOCK_SIZE 65536 -#define EXT3_MIN_BLOCK_LOG_SIZE 10 -#ifdef __KERNEL__ -# define EXT3_BLOCK_SIZE(s) ((s)->s_blocksize) -#else -# define EXT3_BLOCK_SIZE(s) (EXT3_MIN_BLOCK_SIZE << (s)->s_log_block_size) -#endif -#define EXT3_ADDR_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (__u32)) -#ifdef __KERNEL__ -# define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits) -#else -# define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10) -#endif -#ifdef __KERNEL__ -#define EXT3_ADDR_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_addr_per_block_bits) -#define EXT3_INODE_SIZE(s) (EXT3_SB(s)->s_inode_size) -#define EXT3_FIRST_INO(s) (EXT3_SB(s)->s_first_ino) -#else -#define EXT3_INODE_SIZE(s) (((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \ - EXT3_GOOD_OLD_INODE_SIZE : \ - (s)->s_inode_size) -#define EXT3_FIRST_INO(s) (((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \ - EXT3_GOOD_OLD_FIRST_INO : \ - (s)->s_first_ino) -#endif - -/* - * Macro-instructions used to manage fragments - */ -#define EXT3_MIN_FRAG_SIZE 1024 -#define EXT3_MAX_FRAG_SIZE 4096 -#define EXT3_MIN_FRAG_LOG_SIZE 10 -#ifdef __KERNEL__ -# define EXT3_FRAG_SIZE(s) (EXT3_SB(s)->s_frag_size) -# define EXT3_FRAGS_PER_BLOCK(s) (EXT3_SB(s)->s_frags_per_block) -#else -# define EXT3_FRAG_SIZE(s) (EXT3_MIN_FRAG_SIZE << (s)->s_log_frag_size) -# define EXT3_FRAGS_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / EXT3_FRAG_SIZE(s)) -#endif - -/* - * Structure of a blocks group descriptor - */ -struct ext3_group_desc -{ - __le32 bg_block_bitmap; /* Blocks bitmap block */ - __le32 bg_inode_bitmap; /* Inodes bitmap block */ - __le32 bg_inode_table; /* Inodes table block */ - __le16 bg_free_blocks_count; /* Free blocks count */ - __le16 bg_free_inodes_count; /* Free inodes count */ - __le16 bg_used_dirs_count; /* Directories count */ - __u16 bg_pad; - __le32 bg_reserved[3]; -}; - -/* - * Macro-instructions used to manage group descriptors - */ -#ifdef __KERNEL__ -# define EXT3_BLOCKS_PER_GROUP(s) (EXT3_SB(s)->s_blocks_per_group) -# define EXT3_DESC_PER_BLOCK(s) (EXT3_SB(s)->s_desc_per_block) -# define EXT3_INODES_PER_GROUP(s) (EXT3_SB(s)->s_inodes_per_group) -# define EXT3_DESC_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_desc_per_block_bits) -#else -# define EXT3_BLOCKS_PER_GROUP(s) ((s)->s_blocks_per_group) -# define EXT3_DESC_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (struct ext3_group_desc)) -# define EXT3_INODES_PER_GROUP(s) ((s)->s_inodes_per_group) -#endif - -/* - * Constants relative to the data blocks - */ -#define EXT3_NDIR_BLOCKS 12 -#define EXT3_IND_BLOCK EXT3_NDIR_BLOCKS -#define EXT3_DIND_BLOCK (EXT3_IND_BLOCK + 1) -#define EXT3_TIND_BLOCK (EXT3_DIND_BLOCK + 1) -#define EXT3_N_BLOCKS (EXT3_TIND_BLOCK + 1) - -/* - * Inode flags - */ -#define EXT3_SECRM_FL 0x00000001 /* Secure deletion */ -#define EXT3_UNRM_FL 0x00000002 /* Undelete */ -#define EXT3_COMPR_FL 0x00000004 /* Compress file */ -#define EXT3_SYNC_FL 0x00000008 /* Synchronous updates */ -#define EXT3_IMMUTABLE_FL 0x00000010 /* Immutable file */ -#define EXT3_APPEND_FL 0x00000020 /* writes to file may only append */ -#define EXT3_NODUMP_FL 0x00000040 /* do not dump file */ -#define EXT3_NOATIME_FL 0x00000080 /* do not update atime */ -/* Reserved for compression usage... */ -#define EXT3_DIRTY_FL 0x00000100 -#define EXT3_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ -#define EXT3_NOCOMPR_FL 0x00000400 /* Don't compress */ -#define EXT3_ECOMPR_FL 0x00000800 /* Compression error */ -/* End compression flags --- maybe not all used */ -#define EXT3_INDEX_FL 0x00001000 /* hash-indexed directory */ -#define EXT3_IMAGIC_FL 0x00002000 /* AFS directory */ -#define EXT3_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */ -#define EXT3_NOTAIL_FL 0x00008000 /* file tail should not be merged */ -#define EXT3_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ -#define EXT3_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ -#define EXT3_RESERVED_FL 0x80000000 /* reserved for ext3 lib */ - -#define EXT3_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ -#define EXT3_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ - -/* Flags that should be inherited by new inodes from their parent. */ -#define EXT3_FL_INHERITED (EXT3_SECRM_FL | EXT3_UNRM_FL | EXT3_COMPR_FL |\ - EXT3_SYNC_FL | EXT3_NODUMP_FL |\ - EXT3_NOATIME_FL | EXT3_COMPRBLK_FL |\ - EXT3_NOCOMPR_FL | EXT3_JOURNAL_DATA_FL |\ - EXT3_NOTAIL_FL | EXT3_DIRSYNC_FL) - -/* Flags that are appropriate for regular files (all but dir-specific ones). */ -#define EXT3_REG_FLMASK (~(EXT3_DIRSYNC_FL | EXT3_TOPDIR_FL)) - -/* Flags that are appropriate for non-directories/regular files. */ -#define EXT3_OTHER_FLMASK (EXT3_NODUMP_FL | EXT3_NOATIME_FL) - -/* Mask out flags that are inappropriate for the given type of inode. */ -static inline __u32 ext3_mask_flags(umode_t mode, __u32 flags) -{ - if (S_ISDIR(mode)) - return flags; - else if (S_ISREG(mode)) - return flags & EXT3_REG_FLMASK; - else - return flags & EXT3_OTHER_FLMASK; -} - -/* Used to pass group descriptor data when online resize is done */ -struct ext3_new_group_input { - __u32 group; /* Group number for this data */ - __u32 block_bitmap; /* Absolute block number of block bitmap */ - __u32 inode_bitmap; /* Absolute block number of inode bitmap */ - __u32 inode_table; /* Absolute block number of inode table start */ - __u32 blocks_count; /* Total number of blocks in this group */ - __u16 reserved_blocks; /* Number of reserved blocks in this group */ - __u16 unused; -}; - -/* The struct ext3_new_group_input in kernel space, with free_blocks_count */ -struct ext3_new_group_data { - __u32 group; - __u32 block_bitmap; - __u32 inode_bitmap; - __u32 inode_table; - __u32 blocks_count; - __u16 reserved_blocks; - __u16 unused; - __u32 free_blocks_count; -}; - - -/* - * ioctl commands - */ -#define EXT3_IOC_GETFLAGS FS_IOC_GETFLAGS -#define EXT3_IOC_SETFLAGS FS_IOC_SETFLAGS -#define EXT3_IOC_GETVERSION _IOR('f', 3, long) -#define EXT3_IOC_SETVERSION _IOW('f', 4, long) -#define EXT3_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long) -#define EXT3_IOC_GROUP_ADD _IOW('f', 8,struct ext3_new_group_input) -#define EXT3_IOC_GETVERSION_OLD FS_IOC_GETVERSION -#define EXT3_IOC_SETVERSION_OLD FS_IOC_SETVERSION -#ifdef CONFIG_JBD_DEBUG -#define EXT3_IOC_WAIT_FOR_READONLY _IOR('f', 99, long) -#endif -#define EXT3_IOC_GETRSVSZ _IOR('f', 5, long) -#define EXT3_IOC_SETRSVSZ _IOW('f', 6, long) - -/* - * ioctl commands in 32 bit emulation - */ -#define EXT3_IOC32_GETFLAGS FS_IOC32_GETFLAGS -#define EXT3_IOC32_SETFLAGS FS_IOC32_SETFLAGS -#define EXT3_IOC32_GETVERSION _IOR('f', 3, int) -#define EXT3_IOC32_SETVERSION _IOW('f', 4, int) -#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int) -#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int) -#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int) -#ifdef CONFIG_JBD_DEBUG -#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int) -#endif -#define EXT3_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION -#define EXT3_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION - - -/* - * Mount options - */ -struct ext3_mount_options { - unsigned long s_mount_opt; - uid_t s_resuid; - gid_t s_resgid; - unsigned long s_commit_interval; -#ifdef CONFIG_QUOTA - int s_jquota_fmt; - char *s_qf_names[MAXQUOTAS]; -#endif -}; - -/* - * Structure of an inode on the disk - */ -struct ext3_inode { - __le16 i_mode; /* File mode */ - __le16 i_uid; /* Low 16 bits of Owner Uid */ - __le32 i_size; /* Size in bytes */ - __le32 i_atime; /* Access time */ - __le32 i_ctime; /* Creation time */ - __le32 i_mtime; /* Modification time */ - __le32 i_dtime; /* Deletion Time */ - __le16 i_gid; /* Low 16 bits of Group Id */ - __le16 i_links_count; /* Links count */ - __le32 i_blocks; /* Blocks count */ - __le32 i_flags; /* File flags */ - union { - struct { - __u32 l_i_reserved1; - } linux1; - struct { - __u32 h_i_translator; - } hurd1; - struct { - __u32 m_i_reserved1; - } masix1; - } osd1; /* OS dependent 1 */ - __le32 i_block[EXT3_N_BLOCKS];/* Pointers to blocks */ - __le32 i_generation; /* File version (for NFS) */ - __le32 i_file_acl; /* File ACL */ - __le32 i_dir_acl; /* Directory ACL */ - __le32 i_faddr; /* Fragment address */ - union { - struct { - __u8 l_i_frag; /* Fragment number */ - __u8 l_i_fsize; /* Fragment size */ - __u16 i_pad1; - __le16 l_i_uid_high; /* these 2 fields */ - __le16 l_i_gid_high; /* were reserved2[0] */ - __u32 l_i_reserved2; - } linux2; - struct { - __u8 h_i_frag; /* Fragment number */ - __u8 h_i_fsize; /* Fragment size */ - __u16 h_i_mode_high; - __u16 h_i_uid_high; - __u16 h_i_gid_high; - __u32 h_i_author; - } hurd2; - struct { - __u8 m_i_frag; /* Fragment number */ - __u8 m_i_fsize; /* Fragment size */ - __u16 m_pad1; - __u32 m_i_reserved2[2]; - } masix2; - } osd2; /* OS dependent 2 */ - __le16 i_extra_isize; - __le16 i_pad1; -}; - -#define i_size_high i_dir_acl - -#if defined(__KERNEL__) || defined(__linux__) -#define i_reserved1 osd1.linux1.l_i_reserved1 -#define i_frag osd2.linux2.l_i_frag -#define i_fsize osd2.linux2.l_i_fsize -#define i_uid_low i_uid -#define i_gid_low i_gid -#define i_uid_high osd2.linux2.l_i_uid_high -#define i_gid_high osd2.linux2.l_i_gid_high -#define i_reserved2 osd2.linux2.l_i_reserved2 - -#elif defined(__GNU__) - -#define i_translator osd1.hurd1.h_i_translator -#define i_frag osd2.hurd2.h_i_frag; -#define i_fsize osd2.hurd2.h_i_fsize; -#define i_uid_high osd2.hurd2.h_i_uid_high -#define i_gid_high osd2.hurd2.h_i_gid_high -#define i_author osd2.hurd2.h_i_author - -#elif defined(__masix__) - -#define i_reserved1 osd1.masix1.m_i_reserved1 -#define i_frag osd2.masix2.m_i_frag -#define i_fsize osd2.masix2.m_i_fsize -#define i_reserved2 osd2.masix2.m_i_reserved2 - -#endif /* defined(__KERNEL__) || defined(__linux__) */ - -/* - * File system states - */ -#define EXT3_VALID_FS 0x0001 /* Unmounted cleanly */ -#define EXT3_ERROR_FS 0x0002 /* Errors detected */ -#define EXT3_ORPHAN_FS 0x0004 /* Orphans being recovered */ - -/* - * Misc. filesystem flags - */ -#define EXT2_FLAGS_SIGNED_HASH 0x0001 /* Signed dirhash in use */ -#define EXT2_FLAGS_UNSIGNED_HASH 0x0002 /* Unsigned dirhash in use */ -#define EXT2_FLAGS_TEST_FILESYS 0x0004 /* to test development code */ - -/* - * Mount flags - */ -#define EXT3_MOUNT_CHECK 0x00001 /* Do mount-time checks */ -/* EXT3_MOUNT_OLDALLOC was there */ -#define EXT3_MOUNT_GRPID 0x00004 /* Create files with directory's group */ -#define EXT3_MOUNT_DEBUG 0x00008 /* Some debugging messages */ -#define EXT3_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */ -#define EXT3_MOUNT_ERRORS_RO 0x00020 /* Remount fs ro on errors */ -#define EXT3_MOUNT_ERRORS_PANIC 0x00040 /* Panic on errors */ -#define EXT3_MOUNT_MINIX_DF 0x00080 /* Mimics the Minix statfs */ -#define EXT3_MOUNT_NOLOAD 0x00100 /* Don't use existing journal*/ -#define EXT3_MOUNT_ABORT 0x00200 /* Fatal error detected */ -#define EXT3_MOUNT_DATA_FLAGS 0x00C00 /* Mode for data writes: */ -#define EXT3_MOUNT_JOURNAL_DATA 0x00400 /* Write data to journal */ -#define EXT3_MOUNT_ORDERED_DATA 0x00800 /* Flush data before commit */ -#define EXT3_MOUNT_WRITEBACK_DATA 0x00C00 /* No data ordering */ -#define EXT3_MOUNT_UPDATE_JOURNAL 0x01000 /* Update the journal format */ -#define EXT3_MOUNT_NO_UID32 0x02000 /* Disable 32-bit UIDs */ -#define EXT3_MOUNT_XATTR_USER 0x04000 /* Extended user attributes */ -#define EXT3_MOUNT_POSIX_ACL 0x08000 /* POSIX Access Control Lists */ -#define EXT3_MOUNT_RESERVATION 0x10000 /* Preallocation */ -#define EXT3_MOUNT_BARRIER 0x20000 /* Use block barriers */ -#define EXT3_MOUNT_QUOTA 0x80000 /* Some quota option set */ -#define EXT3_MOUNT_USRQUOTA 0x100000 /* "old" user quota */ -#define EXT3_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */ -#define EXT3_MOUNT_DATA_ERR_ABORT 0x400000 /* Abort on file data write - * error in ordered mode */ - -/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */ -#ifndef _LINUX_EXT2_FS_H -#define clear_opt(o, opt) o &= ~EXT3_MOUNT_##opt -#define set_opt(o, opt) o |= EXT3_MOUNT_##opt -#define test_opt(sb, opt) (EXT3_SB(sb)->s_mount_opt & \ - EXT3_MOUNT_##opt) -#else -#define EXT2_MOUNT_NOLOAD EXT3_MOUNT_NOLOAD -#define EXT2_MOUNT_ABORT EXT3_MOUNT_ABORT -#define EXT2_MOUNT_DATA_FLAGS EXT3_MOUNT_DATA_FLAGS -#endif - -#define ext3_set_bit __set_bit_le -#define ext3_set_bit_atomic ext2_set_bit_atomic -#define ext3_clear_bit __clear_bit_le -#define ext3_clear_bit_atomic ext2_clear_bit_atomic -#define ext3_test_bit test_bit_le -#define ext3_find_next_zero_bit find_next_zero_bit_le - -/* - * Maximal mount counts between two filesystem checks - */ -#define EXT3_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */ -#define EXT3_DFL_CHECKINTERVAL 0 /* Don't use interval check */ - -/* - * Behaviour when detecting errors - */ -#define EXT3_ERRORS_CONTINUE 1 /* Continue execution */ -#define EXT3_ERRORS_RO 2 /* Remount fs read-only */ -#define EXT3_ERRORS_PANIC 3 /* Panic */ -#define EXT3_ERRORS_DEFAULT EXT3_ERRORS_CONTINUE - -/* - * Structure of the super block - */ -struct ext3_super_block { -/*00*/ __le32 s_inodes_count; /* Inodes count */ - __le32 s_blocks_count; /* Blocks count */ - __le32 s_r_blocks_count; /* Reserved blocks count */ - __le32 s_free_blocks_count; /* Free blocks count */ -/*10*/ __le32 s_free_inodes_count; /* Free inodes count */ - __le32 s_first_data_block; /* First Data Block */ - __le32 s_log_block_size; /* Block size */ - __le32 s_log_frag_size; /* Fragment size */ -/*20*/ __le32 s_blocks_per_group; /* # Blocks per group */ - __le32 s_frags_per_group; /* # Fragments per group */ - __le32 s_inodes_per_group; /* # Inodes per group */ - __le32 s_mtime; /* Mount time */ -/*30*/ __le32 s_wtime; /* Write time */ - __le16 s_mnt_count; /* Mount count */ - __le16 s_max_mnt_count; /* Maximal mount count */ - __le16 s_magic; /* Magic signature */ - __le16 s_state; /* File system state */ - __le16 s_errors; /* Behaviour when detecting errors */ - __le16 s_minor_rev_level; /* minor revision level */ -/*40*/ __le32 s_lastcheck; /* time of last check */ - __le32 s_checkinterval; /* max. time between checks */ - __le32 s_creator_os; /* OS */ - __le32 s_rev_level; /* Revision level */ -/*50*/ __le16 s_def_resuid; /* Default uid for reserved blocks */ - __le16 s_def_resgid; /* Default gid for reserved blocks */ - /* - * These fields are for EXT3_DYNAMIC_REV superblocks only. - * - * Note: the difference between the compatible feature set and - * the incompatible feature set is that if there is a bit set - * in the incompatible feature set that the kernel doesn't - * know about, it should refuse to mount the filesystem. - * - * e2fsck's requirements are more strict; if it doesn't know - * about a feature in either the compatible or incompatible - * feature set, it must abort and not try to meddle with - * things it doesn't understand... - */ - __le32 s_first_ino; /* First non-reserved inode */ - __le16 s_inode_size; /* size of inode structure */ - __le16 s_block_group_nr; /* block group # of this superblock */ - __le32 s_feature_compat; /* compatible feature set */ -/*60*/ __le32 s_feature_incompat; /* incompatible feature set */ - __le32 s_feature_ro_compat; /* readonly-compatible feature set */ -/*68*/ __u8 s_uuid[16]; /* 128-bit uuid for volume */ -/*78*/ char s_volume_name[16]; /* volume name */ -/*88*/ char s_last_mounted[64]; /* directory where last mounted */ -/*C8*/ __le32 s_algorithm_usage_bitmap; /* For compression */ - /* - * Performance hints. Directory preallocation should only - * happen if the EXT3_FEATURE_COMPAT_DIR_PREALLOC flag is on. - */ - __u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/ - __u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */ - __le16 s_reserved_gdt_blocks; /* Per group desc for online growth */ - /* - * Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set. - */ -/*D0*/ __u8 s_journal_uuid[16]; /* uuid of journal superblock */ -/*E0*/ __le32 s_journal_inum; /* inode number of journal file */ - __le32 s_journal_dev; /* device number of journal file */ - __le32 s_last_orphan; /* start of list of inodes to delete */ - __le32 s_hash_seed[4]; /* HTREE hash seed */ - __u8 s_def_hash_version; /* Default hash version to use */ - __u8 s_reserved_char_pad; - __u16 s_reserved_word_pad; - __le32 s_default_mount_opts; - __le32 s_first_meta_bg; /* First metablock block group */ - __le32 s_mkfs_time; /* When the filesystem was created */ - __le32 s_jnl_blocks[17]; /* Backup of the journal inode */ - /* 64bit support valid if EXT4_FEATURE_COMPAT_64BIT */ -/*150*/ __le32 s_blocks_count_hi; /* Blocks count */ - __le32 s_r_blocks_count_hi; /* Reserved blocks count */ - __le32 s_free_blocks_count_hi; /* Free blocks count */ - __le16 s_min_extra_isize; /* All inodes have at least # bytes */ - __le16 s_want_extra_isize; /* New inodes should reserve # bytes */ - __le32 s_flags; /* Miscellaneous flags */ - __le16 s_raid_stride; /* RAID stride */ - __le16 s_mmp_interval; /* # seconds to wait in MMP checking */ - __le64 s_mmp_block; /* Block for multi-mount protection */ - __le32 s_raid_stripe_width; /* blocks on all data disks (N*stride)*/ - __u8 s_log_groups_per_flex; /* FLEX_BG group size */ - __u8 s_reserved_char_pad2; - __le16 s_reserved_pad; - __u32 s_reserved[162]; /* Padding to the end of the block */ -}; - -#ifdef __KERNEL__ -#include <linux/ext3_fs_i.h> -#include <linux/ext3_fs_sb.h> -static inline struct ext3_sb_info * EXT3_SB(struct super_block *sb) -{ - return sb->s_fs_info; -} -static inline struct ext3_inode_info *EXT3_I(struct inode *inode) -{ - return container_of(inode, struct ext3_inode_info, vfs_inode); -} - -static inline int ext3_valid_inum(struct super_block *sb, unsigned long ino) -{ - return ino == EXT3_ROOT_INO || - ino == EXT3_JOURNAL_INO || - ino == EXT3_RESIZE_INO || - (ino >= EXT3_FIRST_INO(sb) && - ino <= le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)); -} - -/* - * Inode dynamic state flags - */ -enum { - EXT3_STATE_JDATA, /* journaled data exists */ - EXT3_STATE_NEW, /* inode is newly created */ - EXT3_STATE_XATTR, /* has in-inode xattrs */ - EXT3_STATE_FLUSH_ON_CLOSE, /* flush dirty pages on close */ -}; - -static inline int ext3_test_inode_state(struct inode *inode, int bit) -{ - return test_bit(bit, &EXT3_I(inode)->i_state_flags); -} - -static inline void ext3_set_inode_state(struct inode *inode, int bit) -{ - set_bit(bit, &EXT3_I(inode)->i_state_flags); -} - -static inline void ext3_clear_inode_state(struct inode *inode, int bit) -{ - clear_bit(bit, &EXT3_I(inode)->i_state_flags); -} -#else -/* Assume that user mode programs are passing in an ext3fs superblock, not - * a kernel struct super_block. This will allow us to call the feature-test - * macros from user land. */ -#define EXT3_SB(sb) (sb) -#endif - -#define NEXT_ORPHAN(inode) EXT3_I(inode)->i_dtime - -/* - * Codes for operating systems - */ -#define EXT3_OS_LINUX 0 -#define EXT3_OS_HURD 1 -#define EXT3_OS_MASIX 2 -#define EXT3_OS_FREEBSD 3 -#define EXT3_OS_LITES 4 - -/* - * Revision levels - */ -#define EXT3_GOOD_OLD_REV 0 /* The good old (original) format */ -#define EXT3_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */ - -#define EXT3_CURRENT_REV EXT3_GOOD_OLD_REV -#define EXT3_MAX_SUPP_REV EXT3_DYNAMIC_REV - -#define EXT3_GOOD_OLD_INODE_SIZE 128 - -/* - * Feature set definitions - */ - -#define EXT3_HAS_COMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) ) -#define EXT3_HAS_RO_COMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) ) -#define EXT3_HAS_INCOMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) ) -#define EXT3_SET_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask) -#define EXT3_SET_RO_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask) -#define EXT3_SET_INCOMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask) -#define EXT3_CLEAR_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask) -#define EXT3_CLEAR_RO_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask) -#define EXT3_CLEAR_INCOMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask) - -#define EXT3_FEATURE_COMPAT_DIR_PREALLOC 0x0001 -#define EXT3_FEATURE_COMPAT_IMAGIC_INODES 0x0002 -#define EXT3_FEATURE_COMPAT_HAS_JOURNAL 0x0004 -#define EXT3_FEATURE_COMPAT_EXT_ATTR 0x0008 -#define EXT3_FEATURE_COMPAT_RESIZE_INODE 0x0010 -#define EXT3_FEATURE_COMPAT_DIR_INDEX 0x0020 - -#define EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001 -#define EXT3_FEATURE_RO_COMPAT_LARGE_FILE 0x0002 -#define EXT3_FEATURE_RO_COMPAT_BTREE_DIR 0x0004 - -#define EXT3_FEATURE_INCOMPAT_COMPRESSION 0x0001 -#define EXT3_FEATURE_INCOMPAT_FILETYPE 0x0002 -#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 /* Needs recovery */ -#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV 0x0008 /* Journal device */ -#define EXT3_FEATURE_INCOMPAT_META_BG 0x0010 - -#define EXT3_FEATURE_COMPAT_SUPP EXT2_FEATURE_COMPAT_EXT_ATTR -#define EXT3_FEATURE_INCOMPAT_SUPP (EXT3_FEATURE_INCOMPAT_FILETYPE| \ - EXT3_FEATURE_INCOMPAT_RECOVER| \ - EXT3_FEATURE_INCOMPAT_META_BG) -#define EXT3_FEATURE_RO_COMPAT_SUPP (EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER| \ - EXT3_FEATURE_RO_COMPAT_LARGE_FILE| \ - EXT3_FEATURE_RO_COMPAT_BTREE_DIR) - -/* - * Default values for user and/or group using reserved blocks - */ -#define EXT3_DEF_RESUID 0 -#define EXT3_DEF_RESGID 0 - -/* - * Default mount options - */ -#define EXT3_DEFM_DEBUG 0x0001 -#define EXT3_DEFM_BSDGROUPS 0x0002 -#define EXT3_DEFM_XATTR_USER 0x0004 -#define EXT3_DEFM_ACL 0x0008 -#define EXT3_DEFM_UID16 0x0010 -#define EXT3_DEFM_JMODE 0x0060 -#define EXT3_DEFM_JMODE_DATA 0x0020 -#define EXT3_DEFM_JMODE_ORDERED 0x0040 -#define EXT3_DEFM_JMODE_WBACK 0x0060 - -/* - * Structure of a directory entry - */ -#define EXT3_NAME_LEN 255 - -struct ext3_dir_entry { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __le16 name_len; /* Name length */ - char name[EXT3_NAME_LEN]; /* File name */ -}; - -/* - * The new version of the directory entry. Since EXT3 structures are - * stored in intel byte order, and the name_len field could never be - * bigger than 255 chars, it's safe to reclaim the extra byte for the - * file_type field. - */ -struct ext3_dir_entry_2 { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __u8 name_len; /* Name length */ - __u8 file_type; - char name[EXT3_NAME_LEN]; /* File name */ -}; - -/* - * Ext3 directory file types. Only the low 3 bits are used. The - * other bits are reserved for now. - */ -#define EXT3_FT_UNKNOWN 0 -#define EXT3_FT_REG_FILE 1 -#define EXT3_FT_DIR 2 -#define EXT3_FT_CHRDEV 3 -#define EXT3_FT_BLKDEV 4 -#define EXT3_FT_FIFO 5 -#define EXT3_FT_SOCK 6 -#define EXT3_FT_SYMLINK 7 - -#define EXT3_FT_MAX 8 - -/* - * EXT3_DIR_PAD defines the directory entries boundaries - * - * NOTE: It must be a multiple of 4 - */ -#define EXT3_DIR_PAD 4 -#define EXT3_DIR_ROUND (EXT3_DIR_PAD - 1) -#define EXT3_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT3_DIR_ROUND) & \ - ~EXT3_DIR_ROUND) -#define EXT3_MAX_REC_LEN ((1<<16)-1) - -/* - * Tests against MAX_REC_LEN etc were put in place for 64k block - * sizes; if that is not possible on this arch, we can skip - * those tests and speed things up. - */ -static inline unsigned ext3_rec_len_from_disk(__le16 dlen) -{ - unsigned len = le16_to_cpu(dlen); - -#if (PAGE_CACHE_SIZE >= 65536) - if (len == EXT3_MAX_REC_LEN) - return 1 << 16; -#endif - return len; -} - -static inline __le16 ext3_rec_len_to_disk(unsigned len) -{ -#if (PAGE_CACHE_SIZE >= 65536) - if (len == (1 << 16)) - return cpu_to_le16(EXT3_MAX_REC_LEN); - else if (len > (1 << 16)) - BUG(); -#endif - return cpu_to_le16(len); -} - -/* - * Hash Tree Directory indexing - * (c) Daniel Phillips, 2001 - */ - -#define is_dx(dir) (EXT3_HAS_COMPAT_FEATURE(dir->i_sb, \ - EXT3_FEATURE_COMPAT_DIR_INDEX) && \ - (EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) -#define EXT3_DIR_LINK_MAX(dir) (!is_dx(dir) && (dir)->i_nlink >= EXT3_LINK_MAX) -#define EXT3_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2 || (dir)->i_nlink == 1) - -/* Legal values for the dx_root hash_version field: */ - -#define DX_HASH_LEGACY 0 -#define DX_HASH_HALF_MD4 1 -#define DX_HASH_TEA 2 -#define DX_HASH_LEGACY_UNSIGNED 3 -#define DX_HASH_HALF_MD4_UNSIGNED 4 -#define DX_HASH_TEA_UNSIGNED 5 - -#ifdef __KERNEL__ - -/* hash info structure used by the directory hash */ -struct dx_hash_info -{ - u32 hash; - u32 minor_hash; - int hash_version; - u32 *seed; -}; - -#define EXT3_HTREE_EOF 0x7fffffff - -/* - * Control parameters used by ext3_htree_next_block - */ -#define HASH_NB_ALWAYS 1 - - -/* - * Describe an inode's exact location on disk and in memory - */ -struct ext3_iloc -{ - struct buffer_head *bh; - unsigned long offset; - unsigned long block_group; -}; - -static inline struct ext3_inode *ext3_raw_inode(struct ext3_iloc *iloc) -{ - return (struct ext3_inode *) (iloc->bh->b_data + iloc->offset); -} - -/* - * This structure is stuffed into the struct file's private_data field - * for directories. It is where we put information so that we can do - * readdir operations in hash tree order. - */ -struct dir_private_info { - struct rb_root root; - struct rb_node *curr_node; - struct fname *extra_fname; - loff_t last_pos; - __u32 curr_hash; - __u32 curr_minor_hash; - __u32 next_hash; -}; - -/* calculate the first block number of the group */ -static inline ext3_fsblk_t -ext3_group_first_block_no(struct super_block *sb, unsigned long group_no) -{ - return group_no * (ext3_fsblk_t)EXT3_BLOCKS_PER_GROUP(sb) + - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block); -} - -/* - * Special error return code only used by dx_probe() and its callers. - */ -#define ERR_BAD_DX_DIR -75000 - -/* - * Function prototypes - */ - -/* - * Ok, these declarations are also in <linux/kernel.h> but none of the - * ext3 source programs needs to include it so they are duplicated here. - */ -# define NORET_TYPE /**/ -# define ATTRIB_NORET __attribute__((noreturn)) -# define NORET_AND noreturn, - -/* balloc.c */ -extern int ext3_bg_has_super(struct super_block *sb, int group); -extern unsigned long ext3_bg_num_gdb(struct super_block *sb, int group); -extern ext3_fsblk_t ext3_new_block (handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, int *errp); -extern ext3_fsblk_t ext3_new_blocks (handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, unsigned long *count, int *errp); -extern void ext3_free_blocks (handle_t *handle, struct inode *inode, - ext3_fsblk_t block, unsigned long count); -extern void ext3_free_blocks_sb (handle_t *handle, struct super_block *sb, - ext3_fsblk_t block, unsigned long count, - unsigned long *pdquot_freed_blocks); -extern ext3_fsblk_t ext3_count_free_blocks (struct super_block *); -extern void ext3_check_blocks_bitmap (struct super_block *); -extern struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, - unsigned int block_group, - struct buffer_head ** bh); -extern int ext3_should_retry_alloc(struct super_block *sb, int *retries); -extern void ext3_init_block_alloc_info(struct inode *); -extern void ext3_rsv_window_add(struct super_block *sb, struct ext3_reserve_window_node *rsv); -extern int ext3_trim_fs(struct super_block *sb, struct fstrim_range *range); - -/* dir.c */ -extern int ext3_check_dir_entry(const char *, struct inode *, - struct ext3_dir_entry_2 *, - struct buffer_head *, unsigned long); -extern int ext3_htree_store_dirent(struct file *dir_file, __u32 hash, - __u32 minor_hash, - struct ext3_dir_entry_2 *dirent); -extern void ext3_htree_free_dir_info(struct dir_private_info *p); - -/* fsync.c */ -extern int ext3_sync_file(struct file *, loff_t, loff_t, int); - -/* hash.c */ -extern int ext3fs_dirhash(const char *name, int len, struct - dx_hash_info *hinfo); - -/* ialloc.c */ -extern struct inode * ext3_new_inode (handle_t *, struct inode *, - const struct qstr *, umode_t); -extern void ext3_free_inode (handle_t *, struct inode *); -extern struct inode * ext3_orphan_get (struct super_block *, unsigned long); -extern unsigned long ext3_count_free_inodes (struct super_block *); -extern unsigned long ext3_count_dirs (struct super_block *); -extern void ext3_check_inodes_bitmap (struct super_block *); -extern unsigned long ext3_count_free (struct buffer_head *, unsigned); - - -/* inode.c */ -int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, - struct buffer_head *bh, ext3_fsblk_t blocknr); -struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *); -struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *); -int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, - sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result, - int create); - -extern struct inode *ext3_iget(struct super_block *, unsigned long); -extern int ext3_write_inode (struct inode *, struct writeback_control *); -extern int ext3_setattr (struct dentry *, struct iattr *); -extern void ext3_evict_inode (struct inode *); -extern int ext3_sync_inode (handle_t *, struct inode *); -extern void ext3_discard_reservation (struct inode *); -extern void ext3_dirty_inode(struct inode *, int); -extern int ext3_change_inode_journal_flag(struct inode *, int); -extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *); -extern int ext3_can_truncate(struct inode *inode); -extern void ext3_truncate(struct inode *inode); -extern void ext3_set_inode_flags(struct inode *); -extern void ext3_get_inode_flags(struct ext3_inode_info *); -extern void ext3_set_aops(struct inode *inode); -extern int ext3_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, - u64 start, u64 len); - -/* ioctl.c */ -extern long ext3_ioctl(struct file *, unsigned int, unsigned long); -extern long ext3_compat_ioctl(struct file *, unsigned int, unsigned long); - -/* namei.c */ -extern int ext3_orphan_add(handle_t *, struct inode *); -extern int ext3_orphan_del(handle_t *, struct inode *); -extern int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, - __u32 start_minor_hash, __u32 *next_hash); - -/* resize.c */ -extern int ext3_group_add(struct super_block *sb, - struct ext3_new_group_data *input); -extern int ext3_group_extend(struct super_block *sb, - struct ext3_super_block *es, - ext3_fsblk_t n_blocks_count); - -/* super.c */ -extern __printf(3, 4) -void ext3_error(struct super_block *, const char *, const char *, ...); -extern void __ext3_std_error (struct super_block *, const char *, int); -extern __printf(3, 4) -void ext3_abort(struct super_block *, const char *, const char *, ...); -extern __printf(3, 4) -void ext3_warning(struct super_block *, const char *, const char *, ...); -extern __printf(3, 4) -void ext3_msg(struct super_block *, const char *, const char *, ...); -extern void ext3_update_dynamic_rev (struct super_block *sb); - -#define ext3_std_error(sb, errno) \ -do { \ - if ((errno)) \ - __ext3_std_error((sb), __func__, (errno)); \ -} while (0) - -/* - * Inodes and files operations - */ - -/* dir.c */ -extern const struct file_operations ext3_dir_operations; - -/* file.c */ -extern const struct inode_operations ext3_file_inode_operations; -extern const struct file_operations ext3_file_operations; - -/* namei.c */ -extern const struct inode_operations ext3_dir_inode_operations; -extern const struct inode_operations ext3_special_inode_operations; - -/* symlink.c */ -extern const struct inode_operations ext3_symlink_inode_operations; -extern const struct inode_operations ext3_fast_symlink_inode_operations; - - -#endif /* __KERNEL__ */ - -#endif /* _LINUX_EXT3_FS_H */ diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h deleted file mode 100644 index f42c098aed8d..000000000000 --- a/include/linux/ext3_fs_i.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * linux/include/linux/ext3_fs_i.h - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/include/linux/minix_fs_i.h - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#ifndef _LINUX_EXT3_FS_I -#define _LINUX_EXT3_FS_I - -#include <linux/rwsem.h> -#include <linux/rbtree.h> -#include <linux/seqlock.h> -#include <linux/mutex.h> - -/* data type for block offset of block group */ -typedef int ext3_grpblk_t; - -/* data type for filesystem-wide blocks number */ -typedef unsigned long ext3_fsblk_t; - -#define E3FSBLK "%lu" - -struct ext3_reserve_window { - ext3_fsblk_t _rsv_start; /* First byte reserved */ - ext3_fsblk_t _rsv_end; /* Last byte reserved or 0 */ -}; - -struct ext3_reserve_window_node { - struct rb_node rsv_node; - __u32 rsv_goal_size; - __u32 rsv_alloc_hit; - struct ext3_reserve_window rsv_window; -}; - -struct ext3_block_alloc_info { - /* information about reservation window */ - struct ext3_reserve_window_node rsv_window_node; - /* - * was i_next_alloc_block in ext3_inode_info - * is the logical (file-relative) number of the - * most-recently-allocated block in this file. - * We use this for detecting linearly ascending allocation requests. - */ - __u32 last_alloc_logical_block; - /* - * Was i_next_alloc_goal in ext3_inode_info - * is the *physical* companion to i_next_alloc_block. - * it the physical block number of the block which was most-recentl - * allocated to this file. This give us the goal (target) for the next - * allocation when we detect linearly ascending requests. - */ - ext3_fsblk_t last_alloc_physical_block; -}; - -#define rsv_start rsv_window._rsv_start -#define rsv_end rsv_window._rsv_end - -/* - * third extended file system inode data in memory - */ -struct ext3_inode_info { - __le32 i_data[15]; /* unconverted */ - __u32 i_flags; -#ifdef EXT3_FRAGMENTS - __u32 i_faddr; - __u8 i_frag_no; - __u8 i_frag_size; -#endif - ext3_fsblk_t i_file_acl; - __u32 i_dir_acl; - __u32 i_dtime; - - /* - * i_block_group is the number of the block group which contains - * this file's inode. Constant across the lifetime of the inode, - * it is ued for making block allocation decisions - we try to - * place a file's data blocks near its inode block, and new inodes - * near to their parent directory's inode. - */ - __u32 i_block_group; - unsigned long i_state_flags; /* Dynamic state flags for ext3 */ - - /* block reservation info */ - struct ext3_block_alloc_info *i_block_alloc_info; - - __u32 i_dir_start_lookup; -#ifdef CONFIG_EXT3_FS_XATTR - /* - * Extended attributes can be read independently of the main file - * data. Taking i_mutex even when reading would cause contention - * between readers of EAs and writers of regular file data, so - * instead we synchronize on xattr_sem when reading or changing - * EAs. - */ - struct rw_semaphore xattr_sem; -#endif - - struct list_head i_orphan; /* unlinked but open inodes */ - - /* - * i_disksize keeps track of what the inode size is ON DISK, not - * in memory. During truncate, i_size is set to the new size by - * the VFS prior to calling ext3_truncate(), but the filesystem won't - * set i_disksize to 0 until the truncate is actually under way. - * - * The intent is that i_disksize always represents the blocks which - * are used by this file. This allows recovery to restart truncate - * on orphans if we crash during truncate. We actually write i_disksize - * into the on-disk inode when writing inodes out, instead of i_size. - * - * The only time when i_disksize and i_size may be different is when - * a truncate is in progress. The only things which change i_disksize - * are ext3_get_block (growth) and ext3_truncate (shrinkth). - */ - loff_t i_disksize; - - /* on-disk additional length */ - __u16 i_extra_isize; - - /* - * truncate_mutex is for serialising ext3_truncate() against - * ext3_getblock(). In the 2.4 ext2 design, great chunks of inode's - * data tree are chopped off during truncate. We can't do that in - * ext3 because whenever we perform intermediate commits during - * truncate, the inode and all the metadata blocks *must* be in a - * consistent state which allows truncation of the orphans to restart - * during recovery. Hence we must fix the get_block-vs-truncate race - * by other means, so we have truncate_mutex. - */ - struct mutex truncate_mutex; - - /* - * Transactions that contain inode's metadata needed to complete - * fsync and fdatasync, respectively. - */ - atomic_t i_sync_tid; - atomic_t i_datasync_tid; - - struct inode vfs_inode; -}; - -#endif /* _LINUX_EXT3_FS_I */ diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h deleted file mode 100644 index 64365252f1b0..000000000000 --- a/include/linux/ext3_fs_sb.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * linux/include/linux/ext3_fs_sb.h - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/include/linux/minix_fs_sb.h - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#ifndef _LINUX_EXT3_FS_SB -#define _LINUX_EXT3_FS_SB - -#ifdef __KERNEL__ -#include <linux/timer.h> -#include <linux/wait.h> -#include <linux/blockgroup_lock.h> -#include <linux/percpu_counter.h> -#endif -#include <linux/rbtree.h> - -/* - * third extended-fs super-block data in memory - */ -struct ext3_sb_info { - unsigned long s_frag_size; /* Size of a fragment in bytes */ - unsigned long s_frags_per_block;/* Number of fragments per block */ - unsigned long s_inodes_per_block;/* Number of inodes per block */ - unsigned long s_frags_per_group;/* Number of fragments in a group */ - unsigned long s_blocks_per_group;/* Number of blocks in a group */ - unsigned long s_inodes_per_group;/* Number of inodes in a group */ - unsigned long s_itb_per_group; /* Number of inode table blocks per group */ - unsigned long s_gdb_count; /* Number of group descriptor blocks */ - unsigned long s_desc_per_block; /* Number of group descriptors per block */ - unsigned long s_groups_count; /* Number of groups in the fs */ - unsigned long s_overhead_last; /* Last calculated overhead */ - unsigned long s_blocks_last; /* Last seen block count */ - struct buffer_head * s_sbh; /* Buffer containing the super block */ - struct ext3_super_block * s_es; /* Pointer to the super block in the buffer */ - struct buffer_head ** s_group_desc; - unsigned long s_mount_opt; - ext3_fsblk_t s_sb_block; - uid_t s_resuid; - gid_t s_resgid; - unsigned short s_mount_state; - unsigned short s_pad; - int s_addr_per_block_bits; - int s_desc_per_block_bits; - int s_inode_size; - int s_first_ino; - spinlock_t s_next_gen_lock; - u32 s_next_generation; - u32 s_hash_seed[4]; - int s_def_hash_version; - int s_hash_unsigned; /* 3 if hash should be signed, 0 if not */ - struct percpu_counter s_freeblocks_counter; - struct percpu_counter s_freeinodes_counter; - struct percpu_counter s_dirs_counter; - struct blockgroup_lock *s_blockgroup_lock; - - /* root of the per fs reservation window tree */ - spinlock_t s_rsv_window_lock; - struct rb_root s_rsv_window_root; - struct ext3_reserve_window_node s_rsv_window_head; - - /* Journaling */ - struct inode * s_journal_inode; - struct journal_s * s_journal; - struct list_head s_orphan; - struct mutex s_orphan_lock; - struct mutex s_resize_lock; - unsigned long s_commit_interval; - struct block_device *journal_bdev; -#ifdef CONFIG_QUOTA - char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */ - int s_jquota_fmt; /* Format of quota to use */ -#endif -}; - -static inline spinlock_t * -sb_bgl_lock(struct ext3_sb_info *sbi, unsigned int block_group) -{ - return bgl_lock_ptr(sbi->s_blockgroup_lock, block_group); -} - -#endif /* _LINUX_EXT3_FS_SB */ diff --git a/include/linux/ext3_jbd.h b/include/linux/ext3_jbd.h deleted file mode 100644 index d7b5ddca99c2..000000000000 --- a/include/linux/ext3_jbd.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * linux/include/linux/ext3_jbd.h - * - * Written by Stephen C. Tweedie <sct@redhat.com>, 1999 - * - * Copyright 1998--1999 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Ext3-specific journaling extensions. - */ - -#ifndef _LINUX_EXT3_JBD_H -#define _LINUX_EXT3_JBD_H - -#include <linux/fs.h> -#include <linux/jbd.h> -#include <linux/ext3_fs.h> - -#define EXT3_JOURNAL(inode) (EXT3_SB((inode)->i_sb)->s_journal) - -/* Define the number of blocks we need to account to a transaction to - * modify one block of data. - * - * We may have to touch one inode, one bitmap buffer, up to three - * indirection blocks, the group and superblock summaries, and the data - * block to complete the transaction. */ - -#define EXT3_SINGLEDATA_TRANS_BLOCKS 8U - -/* Extended attribute operations touch at most two data buffers, - * two bitmap buffers, and two group summaries, in addition to the inode - * and the superblock, which are already accounted for. */ - -#define EXT3_XATTR_TRANS_BLOCKS 6U - -/* Define the minimum size for a transaction which modifies data. This - * needs to take into account the fact that we may end up modifying two - * quota files too (one for the group, one for the user quota). The - * superblock only gets updated once, of course, so don't bother - * counting that again for the quota updates. */ - -#define EXT3_DATA_TRANS_BLOCKS(sb) (EXT3_SINGLEDATA_TRANS_BLOCKS + \ - EXT3_XATTR_TRANS_BLOCKS - 2 + \ - EXT3_MAXQUOTAS_TRANS_BLOCKS(sb)) - -/* Delete operations potentially hit one directory's namespace plus an - * entire inode, plus arbitrary amounts of bitmap/indirection data. Be - * generous. We can grow the delete transaction later if necessary. */ - -#define EXT3_DELETE_TRANS_BLOCKS(sb) (EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) + 64) - -/* Define an arbitrary limit for the amount of data we will anticipate - * writing to any given transaction. For unbounded transactions such as - * write(2) and truncate(2) we can write more than this, but we always - * start off at the maximum transaction size and grow the transaction - * optimistically as we go. */ - -#define EXT3_MAX_TRANS_DATA 64U - -/* We break up a large truncate or write transaction once the handle's - * buffer credits gets this low, we need either to extend the - * transaction or to start a new one. Reserve enough space here for - * inode, bitmap, superblock, group and indirection updates for at least - * one block, plus two quota updates. Quota allocations are not - * needed. */ - -#define EXT3_RESERVE_TRANS_BLOCKS 12U - -#define EXT3_INDEX_EXTRA_TRANS_BLOCKS 8 - -#ifdef CONFIG_QUOTA -/* Amount of blocks needed for quota update - we know that the structure was - * allocated so we need to update only inode+data */ -#define EXT3_QUOTA_TRANS_BLOCKS(sb) (test_opt(sb, QUOTA) ? 2 : 0) -/* Amount of blocks needed for quota insert/delete - we do some block writes - * but inode, sb and group updates are done only once */ -#define EXT3_QUOTA_INIT_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_INIT_ALLOC*\ - (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_INIT_REWRITE) : 0) -#define EXT3_QUOTA_DEL_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_DEL_ALLOC*\ - (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_DEL_REWRITE) : 0) -#else -#define EXT3_QUOTA_TRANS_BLOCKS(sb) 0 -#define EXT3_QUOTA_INIT_BLOCKS(sb) 0 -#define EXT3_QUOTA_DEL_BLOCKS(sb) 0 -#endif -#define EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_TRANS_BLOCKS(sb)) -#define EXT3_MAXQUOTAS_INIT_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_INIT_BLOCKS(sb)) -#define EXT3_MAXQUOTAS_DEL_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_DEL_BLOCKS(sb)) - -int -ext3_mark_iloc_dirty(handle_t *handle, - struct inode *inode, - struct ext3_iloc *iloc); - -/* - * On success, We end up with an outstanding reference count against - * iloc->bh. This _must_ be cleaned up later. - */ - -int ext3_reserve_inode_write(handle_t *handle, struct inode *inode, - struct ext3_iloc *iloc); - -int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode); - -/* - * Wrapper functions with which ext3 calls into JBD. The intent here is - * to allow these to be turned into appropriate stubs so ext3 can control - * ext2 filesystems, so ext2+ext3 systems only nee one fs. This work hasn't - * been done yet. - */ - -static inline void ext3_journal_release_buffer(handle_t *handle, - struct buffer_head *bh) -{ - journal_release_buffer(handle, bh); -} - -void ext3_journal_abort_handle(const char *caller, const char *err_fn, - struct buffer_head *bh, handle_t *handle, int err); - -int __ext3_journal_get_undo_access(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_get_write_access(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_forget(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_revoke(const char *where, handle_t *handle, - unsigned long blocknr, struct buffer_head *bh); - -int __ext3_journal_get_create_access(const char *where, - handle_t *handle, struct buffer_head *bh); - -int __ext3_journal_dirty_metadata(const char *where, - handle_t *handle, struct buffer_head *bh); - -#define ext3_journal_get_undo_access(handle, bh) \ - __ext3_journal_get_undo_access(__func__, (handle), (bh)) -#define ext3_journal_get_write_access(handle, bh) \ - __ext3_journal_get_write_access(__func__, (handle), (bh)) -#define ext3_journal_revoke(handle, blocknr, bh) \ - __ext3_journal_revoke(__func__, (handle), (blocknr), (bh)) -#define ext3_journal_get_create_access(handle, bh) \ - __ext3_journal_get_create_access(__func__, (handle), (bh)) -#define ext3_journal_dirty_metadata(handle, bh) \ - __ext3_journal_dirty_metadata(__func__, (handle), (bh)) -#define ext3_journal_forget(handle, bh) \ - __ext3_journal_forget(__func__, (handle), (bh)) - -int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh); - -handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks); -int __ext3_journal_stop(const char *where, handle_t *handle); - -static inline handle_t *ext3_journal_start(struct inode *inode, int nblocks) -{ - return ext3_journal_start_sb(inode->i_sb, nblocks); -} - -#define ext3_journal_stop(handle) \ - __ext3_journal_stop(__func__, (handle)) - -static inline handle_t *ext3_journal_current_handle(void) -{ - return journal_current_handle(); -} - -static inline int ext3_journal_extend(handle_t *handle, int nblocks) -{ - return journal_extend(handle, nblocks); -} - -static inline int ext3_journal_restart(handle_t *handle, int nblocks) -{ - return journal_restart(handle, nblocks); -} - -static inline int ext3_journal_blocks_per_page(struct inode *inode) -{ - return journal_blocks_per_page(inode); -} - -static inline int ext3_journal_force_commit(journal_t *journal) -{ - return journal_force_commit(journal); -} - -/* super.c */ -int ext3_force_commit(struct super_block *sb); - -static inline int ext3_should_journal_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 1; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA) - return 1; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 1; - return 0; -} - -static inline int ext3_should_order_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 0; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 0; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA) - return 1; - return 0; -} - -static inline int ext3_should_writeback_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 0; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 0; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA) - return 1; - return 0; -} - -#endif /* _LINUX_EXT3_JBD_H */ diff --git a/include/linux/fb.h b/include/linux/fb.h index c18122f40543..d31cb682e173 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -407,7 +407,6 @@ struct fb_cursor { #include <linux/fs.h> #include <linux/init.h> -#include <linux/device.h> #include <linux/workqueue.h> #include <linux/notifier.h> #include <linux/list.h> @@ -1003,6 +1002,7 @@ extern ssize_t fb_sys_write(struct fb_info *info, const char __user *buf, /* drivers/video/fbmem.c */ extern int register_framebuffer(struct fb_info *fb_info); extern int unregister_framebuffer(struct fb_info *fb_info); +extern int unlink_framebuffer(struct fb_info *fb_info); extern void remove_conflicting_framebuffers(struct apertures_struct *a, const char *name, bool primary); extern int fb_prepare_logo(struct fb_info *fb_info, int rotate); diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index 82163c4b32c9..158a41eed314 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -21,23 +21,45 @@ */ #define NR_OPEN_DEFAULT BITS_PER_LONG -/* - * The embedded_fd_set is a small fd_set, - * suitable for most tasks (which open <= BITS_PER_LONG files) - */ -struct embedded_fd_set { - unsigned long fds_bits[1]; -}; - struct fdtable { unsigned int max_fds; struct file __rcu **fd; /* current fd array */ - fd_set *close_on_exec; - fd_set *open_fds; + unsigned long *close_on_exec; + unsigned long *open_fds; struct rcu_head rcu; struct fdtable *next; }; +static inline void __set_close_on_exec(int fd, struct fdtable *fdt) +{ + __set_bit(fd, fdt->close_on_exec); +} + +static inline void __clear_close_on_exec(int fd, struct fdtable *fdt) +{ + __clear_bit(fd, fdt->close_on_exec); +} + +static inline bool close_on_exec(int fd, const struct fdtable *fdt) +{ + return test_bit(fd, fdt->close_on_exec); +} + +static inline void __set_open_fd(int fd, struct fdtable *fdt) +{ + __set_bit(fd, fdt->open_fds); +} + +static inline void __clear_open_fd(int fd, struct fdtable *fdt) +{ + __clear_bit(fd, fdt->open_fds); +} + +static inline bool fd_is_open(int fd, const struct fdtable *fdt) +{ + return test_bit(fd, fdt->open_fds); +} + /* * Open file table structure */ @@ -53,8 +75,8 @@ struct files_struct { */ spinlock_t file_lock ____cacheline_aligned_in_smp; int next_fd; - struct embedded_fd_set close_on_exec_init; - struct embedded_fd_set open_fds_init; + unsigned long close_on_exec_init[1]; + unsigned long open_fds_init[1]; struct file __rcu * fd_array[NR_OPEN_DEFAULT]; }; diff --git a/include/linux/file.h b/include/linux/file.h index 21a79958541c..58bf158c53d9 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -12,7 +12,6 @@ struct file; extern void fput(struct file *); -extern void drop_file_write_access(struct file *file); struct file_operations; struct vfsmount; diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index 357dbfc2829e..d50036953497 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -207,12 +207,16 @@ struct fw_cdev_event_request2 { * @closure: See &fw_cdev_event_common; * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT - * @cycle: Cycle counter of the interrupt packet + * @cycle: Cycle counter of the last completed packet * @header_length: Total length of following headers, in bytes * @header: Stripped headers, if any * * This event is sent when the controller has completed an &fw_cdev_iso_packet - * with the %FW_CDEV_ISO_INTERRUPT bit set. + * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with + * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets + * without the interrupt bit set that the kernel's internal buffer for @header + * is about to overflow. (In the last case, kernels with ABI version < 5 drop + * header data up to the next interrupt packet.) * * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT): * @@ -267,9 +271,9 @@ struct fw_cdev_event_iso_interrupt { * * This event is sent in multichannel contexts (context type * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer - * chunks that have the %FW_CDEV_ISO_INTERRUPT bit set. Whether this happens - * when a packet is completed and/or when a buffer chunk is completed depends - * on the hardware implementation. + * chunks that have been completely filled and that have the + * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with + * %FW_CDEV_IOC_FLUSH_ISO. * * The buffer is continuously filled with the following data, per packet: * - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt, @@ -419,6 +423,9 @@ union fw_cdev_event { #define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets) #define FW_CDEV_IOC_SET_ISO_CHANNELS _IOW('#', 0x17, struct fw_cdev_set_iso_channels) +/* available since kernel version 3.4 */ +#define FW_CDEV_IOC_FLUSH_ISO _IOW('#', 0x18, struct fw_cdev_flush_iso) + /* * ABI version history * 1 (2.6.22) - initial version @@ -441,6 +448,9 @@ union fw_cdev_event { * - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL, * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and * %FW_CDEV_IOC_SET_ISO_CHANNELS + * 5 (3.4) - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to + * avoid dropping data + * - added %FW_CDEV_IOC_FLUSH_ISO */ /** @@ -851,6 +861,25 @@ struct fw_cdev_stop_iso { }; /** + * struct fw_cdev_flush_iso - flush completed iso packets + * @handle: handle of isochronous context to flush + * + * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, + * report any completed packets. + * + * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current + * offset in the receive buffer, if it has changed; this is typically in the + * middle of some buffer chunk. + * + * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL + * events generated by this ioctl are sent synchronously, i.e., are available + * for reading from the file descriptor when this ioctl returns. + */ +struct fw_cdev_flush_iso { + __u32 handle; +}; + +/** * struct fw_cdev_get_cycle_timer - read cycle timer register * @local_time: system time, in microseconds since the Epoch * @cycle_timer: Cycle Time register contents diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 84ccf8e04fa6..cdc9b719e9c7 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -17,9 +17,6 @@ #include <linux/atomic.h> #include <asm/byteorder.h> -#define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args) -#define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) - #define CSR_REGISTER_BASE 0xfffff0000000ULL /* register offsets are relative to CSR_REGISTER_BASE */ @@ -203,18 +200,6 @@ static inline int fw_device_is_shutdown(struct fw_device *device) return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN; } -static inline struct fw_device *fw_device_get(struct fw_device *device) -{ - get_device(&device->device); - - return device; -} - -static inline void fw_device_put(struct fw_device *device) -{ - put_device(&device->device); -} - int fw_device_enable_phys_dma(struct fw_device *device); /* @@ -441,6 +426,7 @@ int fw_iso_context_queue(struct fw_iso_context *ctx, struct fw_iso_buffer *buffer, unsigned long payload); void fw_iso_context_queue_flush(struct fw_iso_context *ctx); +int fw_iso_context_flush_completions(struct fw_iso_context *ctx); int fw_iso_context_start(struct fw_iso_context *ctx, int cycle, int sync, int tags); int fw_iso_context_stop(struct fw_iso_context *ctx); diff --git a/include/linux/fs.h b/include/linux/fs.h index 69cd5bb640f5..135693e79f2b 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -92,6 +92,10 @@ struct inodes_stat_t { /* File is opened using open(.., 3, ..) and is writeable only for ioctls (specialy hack for floppy.c) */ #define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) +/* 32bit hashes as llseek() offset (for directories) */ +#define FMODE_32BITHASH ((__force fmode_t)0x200) +/* 64bit hashes as llseek() offset (for directories) */ +#define FMODE_64BITHASH ((__force fmode_t)0x400) /* * Don't update ctime and mtime. @@ -389,6 +393,7 @@ struct inodes_stat_t { #include <linux/prio_tree.h> #include <linux/init.h> #include <linux/pid.h> +#include <linux/bug.h> #include <linux/mutex.h> #include <linux/capability.h> #include <linux/semaphore.h> @@ -1459,6 +1464,7 @@ struct super_block { u8 s_uuid[16]; /* UUID */ void *s_fs_info; /* Filesystem private info */ + unsigned int s_max_links; fmode_t s_mode; /* Granularity of c/m/atime in ns. @@ -1811,11 +1817,11 @@ static inline void inode_inc_iversion(struct inode *inode) spin_unlock(&inode->i_lock); } -extern void touch_atime(struct vfsmount *mnt, struct dentry *dentry); +extern void touch_atime(struct path *); static inline void file_accessed(struct file *file) { if (!(file->f_flags & O_NOATIME)) - touch_atime(file->f_path.mnt, file->f_path.dentry); + touch_atime(&file->f_path); } int sync_inode(struct inode *inode, struct writeback_control *wbc); @@ -1870,19 +1876,6 @@ extern struct dentry *mount_pseudo(struct file_system_type *, char *, const struct dentry_operations *dops, unsigned long); -static inline void sb_mark_dirty(struct super_block *sb) -{ - sb->s_dirt = 1; -} -static inline void sb_mark_clean(struct super_block *sb) -{ - sb->s_dirt = 0; -} -static inline int sb_is_dirty(struct super_block *sb) -{ - return sb->s_dirt; -} - /* Alas, no aliases. Too much hassle with bringing module.h everywhere */ #define fops_get(fops) \ (((fops) && try_module_get((fops)->owner) ? (fops) : NULL)) @@ -2304,7 +2297,10 @@ extern struct inode * igrab(struct inode *); extern ino_t iunique(struct super_block *, ino_t); extern int inode_needs_sync(struct inode *inode); extern int generic_delete_inode(struct inode *inode); -extern int generic_drop_inode(struct inode *inode); +static inline int generic_drop_inode(struct inode *inode) +{ + return !inode->i_nlink || inode_unhashed(inode); +} extern struct inode *ilookup5_nowait(struct super_block *sb, unsigned long hashval, int (*test)(struct inode *, void *), diff --git a/include/linux/fsl/mxs-dma.h b/include/linux/fsl/mxs-dma.h new file mode 100644 index 000000000000..203d7c4a3e11 --- /dev/null +++ b/include/linux/fsl/mxs-dma.h @@ -0,0 +1,28 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MXS_DMA_H__ +#define __MACH_MXS_DMA_H__ + +#include <linux/dmaengine.h> + +struct mxs_dma_data { + int chan_irq; +}; + +static inline int mxs_dma_is_apbh(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh"); +} + +static inline int mxs_dma_is_apbx(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx"); +} + +#endif /* __MACH_MXS_DMA_H__ */ diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index 2a53f10712b3..a6dfe6944564 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -14,6 +14,7 @@ #include <linux/fsnotify_backend.h> #include <linux/audit.h> #include <linux/slab.h> +#include <linux/bug.h> /* * fsnotify_d_instantiate - instantiate a dentry for inode diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index dd478fc8f9f5..5f3f3be5af09 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -144,12 +144,14 @@ struct event_filter; enum trace_reg { TRACE_REG_REGISTER, TRACE_REG_UNREGISTER, +#ifdef CONFIG_PERF_EVENTS TRACE_REG_PERF_REGISTER, TRACE_REG_PERF_UNREGISTER, TRACE_REG_PERF_OPEN, TRACE_REG_PERF_CLOSE, TRACE_REG_PERF_ADD, TRACE_REG_PERF_DEL, +#endif }; struct ftrace_event_call; diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h index b148087f49a6..fa98bdb073b9 100644 --- a/include/linux/gfs2_ondisk.h +++ b/include/linux/gfs2_ondisk.h @@ -168,6 +168,7 @@ struct gfs2_rindex { #define GFS2_RGF_METAONLY 0x00000002 #define GFS2_RGF_DATAONLY 0x00000004 #define GFS2_RGF_NOALLOC 0x00000008 +#define GFS2_RGF_TRIMMED 0x00000010 struct gfs2_rgrp { struct gfs2_meta_header rg_header; diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 38ac48b7d3a8..6155ecf192b0 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -14,6 +14,12 @@ #define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW) #define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) +/* Gpio pin is open drain */ +#define GPIOF_OPEN_DRAIN (1 << 2) + +/* Gpio pin is open source */ +#define GPIOF_OPEN_SOURCE (1 << 3) + /** * struct gpio - a structure describing a GPIO with configuration * @gpio: the GPIO number @@ -34,6 +40,7 @@ struct gpio { #include <linux/kernel.h> #include <linux/types.h> #include <linux/errno.h> +#include <linux/bug.h> struct device; struct gpio_chip; diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index 004ff33ab38e..a7e977ff4abf 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -6,7 +6,7 @@ struct device; struct gpio_keys_button { /* Configuration parameters */ unsigned int code; /* input event code (KEY_*, SW_*) */ - int gpio; + int gpio; /* -1 if this key does not support gpio */ int active_low; const char *desc; unsigned int type; /* input event type (EV_KEY, EV_SW, EV_ABS) */ @@ -14,6 +14,7 @@ struct gpio_keys_button { int debounce_interval; /* debounce ticks interval in msecs */ bool can_disable; int value; /* axis value for EV_ABS */ + unsigned int irq; /* Irq number in case of interrupt keys */ }; struct gpio_keys_platform_data { diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 6549ed75e0a7..d3999b4e26cc 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -3,6 +3,7 @@ #include <linux/fs.h> #include <linux/kernel.h> +#include <linux/bug.h> #include <linux/mm.h> #include <linux/uaccess.h> #include <linux/hardirq.h> diff --git a/include/linux/hsi/Kbuild b/include/linux/hsi/Kbuild new file mode 100644 index 000000000000..271a770b4784 --- /dev/null +++ b/include/linux/hsi/Kbuild @@ -0,0 +1 @@ +header-y += hsi_char.h diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h new file mode 100644 index 000000000000..4b178067f405 --- /dev/null +++ b/include/linux/hsi/hsi.h @@ -0,0 +1,410 @@ +/* + * HSI core header file. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea <carlos.chinea@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_HSI_H__ +#define __LINUX_HSI_H__ + +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/scatterlist.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/module.h> + +/* HSI message ttype */ +#define HSI_MSG_READ 0 +#define HSI_MSG_WRITE 1 + +/* HSI configuration values */ +enum { + HSI_MODE_STREAM = 1, + HSI_MODE_FRAME, +}; + +enum { + HSI_FLOW_SYNC, /* Synchronized flow */ + HSI_FLOW_PIPE, /* Pipelined flow */ +}; + +enum { + HSI_ARB_RR, /* Round-robin arbitration */ + HSI_ARB_PRIO, /* Channel priority arbitration */ +}; + +#define HSI_MAX_CHANNELS 16 + +/* HSI message status codes */ +enum { + HSI_STATUS_COMPLETED, /* Message transfer is completed */ + HSI_STATUS_PENDING, /* Message pending to be read/write (POLL) */ + HSI_STATUS_PROCEEDING, /* Message transfer is ongoing */ + HSI_STATUS_QUEUED, /* Message waiting to be served */ + HSI_STATUS_ERROR, /* Error when message transfer was ongoing */ +}; + +/* HSI port event codes */ +enum { + HSI_EVENT_START_RX, + HSI_EVENT_STOP_RX, +}; + +/** + * struct hsi_config - Configuration for RX/TX HSI modules + * @mode: Bit transmission mode (STREAM or FRAME) + * @channels: Number of channels to use [1..16] + * @speed: Max bit transmission speed (Kbit/s) + * @flow: RX flow type (SYNCHRONIZED or PIPELINE) + * @arb_mode: Arbitration mode for TX frame (Round robin, priority) + */ +struct hsi_config { + unsigned int mode; + unsigned int channels; + unsigned int speed; + union { + unsigned int flow; /* RX only */ + unsigned int arb_mode; /* TX only */ + }; +}; + +/** + * struct hsi_board_info - HSI client board info + * @name: Name for the HSI device + * @hsi_id: HSI controller id where the client sits + * @port: Port number in the controller where the client sits + * @tx_cfg: HSI TX configuration + * @rx_cfg: HSI RX configuration + * @platform_data: Platform related data + * @archdata: Architecture-dependent device data + */ +struct hsi_board_info { + const char *name; + unsigned int hsi_id; + unsigned int port; + struct hsi_config tx_cfg; + struct hsi_config rx_cfg; + void *platform_data; + struct dev_archdata *archdata; +}; + +#ifdef CONFIG_HSI_BOARDINFO +extern int hsi_register_board_info(struct hsi_board_info const *info, + unsigned int len); +#else +static inline int hsi_register_board_info(struct hsi_board_info const *info, + unsigned int len) +{ + return 0; +} +#endif /* CONFIG_HSI_BOARDINFO */ + +/** + * struct hsi_client - HSI client attached to an HSI port + * @device: Driver model representation of the device + * @tx_cfg: HSI TX configuration + * @rx_cfg: HSI RX configuration + * @hsi_start_rx: Called after incoming wake line goes high + * @hsi_stop_rx: Called after incoming wake line goes low + */ +struct hsi_client { + struct device device; + struct hsi_config tx_cfg; + struct hsi_config rx_cfg; + void (*hsi_start_rx)(struct hsi_client *cl); + void (*hsi_stop_rx)(struct hsi_client *cl); + /* private: */ + unsigned int pclaimed:1; + struct list_head link; +}; + +#define to_hsi_client(dev) container_of(dev, struct hsi_client, device) + +static inline void hsi_client_set_drvdata(struct hsi_client *cl, void *data) +{ + dev_set_drvdata(&cl->device, data); +} + +static inline void *hsi_client_drvdata(struct hsi_client *cl) +{ + return dev_get_drvdata(&cl->device); +} + +/** + * struct hsi_client_driver - Driver associated to an HSI client + * @driver: Driver model representation of the driver + */ +struct hsi_client_driver { + struct device_driver driver; +}; + +#define to_hsi_client_driver(drv) container_of(drv, struct hsi_client_driver,\ + driver) + +int hsi_register_client_driver(struct hsi_client_driver *drv); + +static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv) +{ + driver_unregister(&drv->driver); +} + +/** + * struct hsi_msg - HSI message descriptor + * @link: Free to use by the current descriptor owner + * @cl: HSI device client that issues the transfer + * @sgt: Head of the scatterlist array + * @context: Client context data associated to the transfer + * @complete: Transfer completion callback + * @destructor: Destructor to free resources when flushing + * @status: Status of the transfer when completed + * @actual_len: Actual length of data transfered on completion + * @channel: Channel were to TX/RX the message + * @ttype: Transfer type (TX if set, RX otherwise) + * @break_frame: if true HSI will send/receive a break frame. Data buffers are + * ignored in the request. + */ +struct hsi_msg { + struct list_head link; + struct hsi_client *cl; + struct sg_table sgt; + void *context; + + void (*complete)(struct hsi_msg *msg); + void (*destructor)(struct hsi_msg *msg); + + int status; + unsigned int actual_len; + unsigned int channel; + unsigned int ttype:1; + unsigned int break_frame:1; +}; + +struct hsi_msg *hsi_alloc_msg(unsigned int n_frag, gfp_t flags); +void hsi_free_msg(struct hsi_msg *msg); + +/** + * struct hsi_port - HSI port device + * @device: Driver model representation of the device + * @tx_cfg: Current TX path configuration + * @rx_cfg: Current RX path configuration + * @num: Port number + * @shared: Set when port can be shared by different clients + * @claimed: Reference count of clients which claimed the port + * @lock: Serialize port claim + * @async: Asynchronous transfer callback + * @setup: Callback to set the HSI client configuration + * @flush: Callback to clean the HW state and destroy all pending transfers + * @start_tx: Callback to inform that a client wants to TX data + * @stop_tx: Callback to inform that a client no longer wishes to TX data + * @release: Callback to inform that a client no longer uses the port + * @clients: List of hsi_clients using the port. + * @clock: Lock to serialize access to the clients list. + */ +struct hsi_port { + struct device device; + struct hsi_config tx_cfg; + struct hsi_config rx_cfg; + unsigned int num; + unsigned int shared:1; + int claimed; + struct mutex lock; + int (*async)(struct hsi_msg *msg); + int (*setup)(struct hsi_client *cl); + int (*flush)(struct hsi_client *cl); + int (*start_tx)(struct hsi_client *cl); + int (*stop_tx)(struct hsi_client *cl); + int (*release)(struct hsi_client *cl); + struct list_head clients; + spinlock_t clock; +}; + +#define to_hsi_port(dev) container_of(dev, struct hsi_port, device) +#define hsi_get_port(cl) to_hsi_port((cl)->device.parent) + +void hsi_event(struct hsi_port *port, unsigned int event); +int hsi_claim_port(struct hsi_client *cl, unsigned int share); +void hsi_release_port(struct hsi_client *cl); + +static inline int hsi_port_claimed(struct hsi_client *cl) +{ + return cl->pclaimed; +} + +static inline void hsi_port_set_drvdata(struct hsi_port *port, void *data) +{ + dev_set_drvdata(&port->device, data); +} + +static inline void *hsi_port_drvdata(struct hsi_port *port) +{ + return dev_get_drvdata(&port->device); +} + +/** + * struct hsi_controller - HSI controller device + * @device: Driver model representation of the device + * @owner: Pointer to the module owning the controller + * @id: HSI controller ID + * @num_ports: Number of ports in the HSI controller + * @port: Array of HSI ports + */ +struct hsi_controller { + struct device device; + struct module *owner; + unsigned int id; + unsigned int num_ports; + struct hsi_port *port; +}; + +#define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device) + +struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags); +void hsi_free_controller(struct hsi_controller *hsi); +int hsi_register_controller(struct hsi_controller *hsi); +void hsi_unregister_controller(struct hsi_controller *hsi); + +static inline void hsi_controller_set_drvdata(struct hsi_controller *hsi, + void *data) +{ + dev_set_drvdata(&hsi->device, data); +} + +static inline void *hsi_controller_drvdata(struct hsi_controller *hsi) +{ + return dev_get_drvdata(&hsi->device); +} + +static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi, + unsigned int num) +{ + return (num < hsi->num_ports) ? &hsi->port[num] : NULL; +} + +/* + * API for HSI clients + */ +int hsi_async(struct hsi_client *cl, struct hsi_msg *msg); + +/** + * hsi_id - Get HSI controller ID associated to a client + * @cl: Pointer to a HSI client + * + * Return the controller id where the client is attached to + */ +static inline unsigned int hsi_id(struct hsi_client *cl) +{ + return to_hsi_controller(cl->device.parent->parent)->id; +} + +/** + * hsi_port_id - Gets the port number a client is attached to + * @cl: Pointer to HSI client + * + * Return the port number associated to the client + */ +static inline unsigned int hsi_port_id(struct hsi_client *cl) +{ + return to_hsi_port(cl->device.parent)->num; +} + +/** + * hsi_setup - Configure the client's port + * @cl: Pointer to the HSI client + * + * When sharing ports, clients should either relay on a single + * client setup or have the same setup for all of them. + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_setup(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->setup(cl); +} + +/** + * hsi_flush - Flush all pending transactions on the client's port + * @cl: Pointer to the HSI client + * + * This function will destroy all pending hsi_msg in the port and reset + * the HW port so it is ready to receive and transmit from a clean state. + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_flush(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->flush(cl); +} + +/** + * hsi_async_read - Submit a read transfer + * @cl: Pointer to the HSI client + * @msg: HSI message descriptor of the transfer + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_async_read(struct hsi_client *cl, struct hsi_msg *msg) +{ + msg->ttype = HSI_MSG_READ; + return hsi_async(cl, msg); +} + +/** + * hsi_async_write - Submit a write transfer + * @cl: Pointer to the HSI client + * @msg: HSI message descriptor of the transfer + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_async_write(struct hsi_client *cl, struct hsi_msg *msg) +{ + msg->ttype = HSI_MSG_WRITE; + return hsi_async(cl, msg); +} + +/** + * hsi_start_tx - Signal the port that the client wants to start a TX + * @cl: Pointer to the HSI client + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_start_tx(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->start_tx(cl); +} + +/** + * hsi_stop_tx - Signal the port that the client no longer wants to transmit + * @cl: Pointer to the HSI client + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_stop_tx(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->stop_tx(cl); +} +#endif /* __LINUX_HSI_H__ */ diff --git a/include/linux/hsi/hsi_char.h b/include/linux/hsi/hsi_char.h new file mode 100644 index 000000000000..76160b4f455d --- /dev/null +++ b/include/linux/hsi/hsi_char.h @@ -0,0 +1,63 @@ +/* + * Part of the HSI character device driver. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Andras Domokos <andras.domokos at nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + + +#ifndef __HSI_CHAR_H +#define __HSI_CHAR_H + +#define HSI_CHAR_MAGIC 'k' +#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num) + +#define HSC_RESET HSC_IO(16) +#define HSC_SET_PM HSC_IO(17) +#define HSC_SEND_BREAK HSC_IO(18) +#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config) +#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config) +#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config) +#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config) + +#define HSC_PM_DISABLE 0 +#define HSC_PM_ENABLE 1 + +#define HSC_MODE_STREAM 1 +#define HSC_MODE_FRAME 2 +#define HSC_FLOW_SYNC 0 +#define HSC_ARB_RR 0 +#define HSC_ARB_PRIO 1 + +struct hsc_rx_config { + uint32_t mode; + uint32_t flow; + uint32_t channels; +}; + +struct hsc_tx_config { + uint32_t mode; + uint32_t channels; + uint32_t speed; + uint32_t arb_mode; +}; + +#endif /* __HSI_CHAR_H */ diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h index 1b921299abc4..c8af7a2efb52 100644 --- a/include/linux/huge_mm.h +++ b/include/linux/huge_mm.h @@ -51,6 +51,9 @@ extern pmd_t *page_check_address_pmd(struct page *page, unsigned long address, enum page_check_address_pmd_flag flag); +#define HPAGE_PMD_ORDER (HPAGE_PMD_SHIFT-PAGE_SHIFT) +#define HPAGE_PMD_NR (1<<HPAGE_PMD_ORDER) + #ifdef CONFIG_TRANSPARENT_HUGEPAGE #define HPAGE_PMD_SHIFT HPAGE_SHIFT #define HPAGE_PMD_MASK HPAGE_MASK @@ -102,8 +105,6 @@ extern void __split_huge_page_pmd(struct mm_struct *mm, pmd_t *pmd); BUG_ON(pmd_trans_splitting(*____pmd) || \ pmd_trans_huge(*____pmd)); \ } while (0) -#define HPAGE_PMD_ORDER (HPAGE_PMD_SHIFT-PAGE_SHIFT) -#define HPAGE_PMD_NR (1<<HPAGE_PMD_ORDER) #if HPAGE_PMD_ORDER > MAX_ORDER #error "hugepages can't be allocated by the buddy allocator" #endif @@ -113,6 +114,18 @@ extern void __vma_adjust_trans_huge(struct vm_area_struct *vma, unsigned long start, unsigned long end, long adjust_next); +extern int __pmd_trans_huge_lock(pmd_t *pmd, + struct vm_area_struct *vma); +/* mmap_sem must be held on entry */ +static inline int pmd_trans_huge_lock(pmd_t *pmd, + struct vm_area_struct *vma) +{ + VM_BUG_ON(!rwsem_is_locked(&vma->vm_mm->mmap_sem)); + if (pmd_trans_huge(*pmd)) + return __pmd_trans_huge_lock(pmd, vma); + else + return 0; +} static inline void vma_adjust_trans_huge(struct vm_area_struct *vma, unsigned long start, unsigned long end, @@ -146,9 +159,9 @@ static inline struct page *compound_trans_head(struct page *page) return page; } #else /* CONFIG_TRANSPARENT_HUGEPAGE */ -#define HPAGE_PMD_SHIFT ({ BUG(); 0; }) -#define HPAGE_PMD_MASK ({ BUG(); 0; }) -#define HPAGE_PMD_SIZE ({ BUG(); 0; }) +#define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; }) +#define HPAGE_PMD_MASK ({ BUILD_BUG(); 0; }) +#define HPAGE_PMD_SIZE ({ BUILD_BUG(); 0; }) #define hpage_nr_pages(x) 1 @@ -176,6 +189,11 @@ static inline void vma_adjust_trans_huge(struct vm_area_struct *vma, long adjust_next) { } +static inline int pmd_trans_huge_lock(pmd_t *pmd, + struct vm_area_struct *vma) +{ + return 0; +} #endif /* CONFIG_TRANSPARENT_HUGEPAGE */ #endif /* _LINUX_HUGE_MM_H */ diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index d9d6c868b86b..000837e126e6 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -14,6 +14,15 @@ struct user_struct; #include <linux/shm.h> #include <asm/tlbflush.h> +struct hugepage_subpool { + spinlock_t lock; + long count; + long max_hpages, used_hpages; +}; + +struct hugepage_subpool *hugepage_new_subpool(long nr_blocks); +void hugepage_put_subpool(struct hugepage_subpool *spool); + int PageHuge(struct page *page); void reset_vma_resv_huge_pages(struct vm_area_struct *vma); @@ -128,35 +137,14 @@ enum { }; #ifdef CONFIG_HUGETLBFS -struct hugetlbfs_config { - uid_t uid; - gid_t gid; - umode_t mode; - long nr_blocks; - long nr_inodes; - struct hstate *hstate; -}; - struct hugetlbfs_sb_info { - long max_blocks; /* blocks allowed */ - long free_blocks; /* blocks free */ long max_inodes; /* inodes allowed */ long free_inodes; /* inodes free */ spinlock_t stat_lock; struct hstate *hstate; + struct hugepage_subpool *spool; }; - -struct hugetlbfs_inode_info { - struct shared_policy policy; - struct inode vfs_inode; -}; - -static inline struct hugetlbfs_inode_info *HUGETLBFS_I(struct inode *inode) -{ - return container_of(inode, struct hugetlbfs_inode_info, vfs_inode); -} - static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb) { return sb->s_fs_info; @@ -164,10 +152,9 @@ static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb) extern const struct file_operations hugetlbfs_file_operations; extern const struct vm_operations_struct hugetlb_vm_ops; -struct file *hugetlb_file_setup(const char *name, size_t size, vm_flags_t acct, +struct file *hugetlb_file_setup(const char *name, unsigned long addr, + size_t size, vm_flags_t acct, struct user_struct **user, int creat_flags); -int hugetlb_get_quota(struct address_space *mapping, long delta); -void hugetlb_put_quota(struct address_space *mapping, long delta); static inline int is_file_hugepages(struct file *file) { @@ -179,15 +166,11 @@ static inline int is_file_hugepages(struct file *file) return 0; } -static inline void set_file_hugepages(struct file *file) -{ - file->f_op = &hugetlbfs_file_operations; -} #else /* !CONFIG_HUGETLBFS */ #define is_file_hugepages(file) 0 -#define set_file_hugepages(file) BUG() -static inline struct file *hugetlb_file_setup(const char *name, size_t size, +static inline struct file * +hugetlb_file_setup(const char *name, unsigned long addr, size_t size, vm_flags_t acctflag, struct user_struct **user, int creat_flags) { return ERR_PTR(-ENOSYS); diff --git a/include/linux/hwmon-sysfs.h b/include/linux/hwmon-sysfs.h index a90c09d331c1..1c7b89ae6bdc 100644 --- a/include/linux/hwmon-sysfs.h +++ b/include/linux/hwmon-sysfs.h @@ -20,6 +20,8 @@ #ifndef _LINUX_HWMON_SYSFS_H #define _LINUX_HWMON_SYSFS_H +#include <linux/device.h> + struct sensor_device_attribute{ struct device_attribute dev_attr; int index; diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h index 6b6ee702b007..82b29ae6ebb0 100644 --- a/include/linux/hwmon.h +++ b/include/linux/hwmon.h @@ -14,7 +14,7 @@ #ifndef _HWMON_H_ #define _HWMON_H_ -#include <linux/device.h> +struct device; struct device *hwmon_device_register(struct device *dev); diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index aad6bd4b3efd..3343298e40e8 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -20,12 +20,12 @@ #include <linux/err.h> #include <linux/sched.h> -#include <linux/device.h> /* hwspinlock mode argument */ #define HWLOCK_IRQSTATE 0x01 /* Disable interrupts, save state */ #define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */ +struct device; struct hwspinlock; struct hwspinlock_device; struct hwspinlock_ops; diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index 4f98148c11c3..63904ba6887e 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -15,7 +15,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even @@ -49,5 +50,6 @@ struct i2c_algo_bit_data { int i2c_bit_add_bus(struct i2c_adapter *); int i2c_bit_add_numbered_bus(struct i2c_adapter *); +extern const struct i2c_algorithm i2c_bit_algo; #endif /* _LINUX_I2C_ALGO_BIT_H */ diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 0f91a957a690..538e8f41a319 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index fd53bfd26470..8a7406b2114d 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ #ifndef _LINUX_I2C_DEV_H diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h index 34536effd652..747f0cde4164 100644 --- a/include/linux/i2c-mux.h +++ b/include/linux/i2c-mux.h @@ -18,7 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #ifndef _LINUX_I2C_MUX_H diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h index 63f57a8c8b31..017fb40f702a 100644 --- a/include/linux/i2c-smbus.h +++ b/include/linux/i2c-smbus.h @@ -15,7 +15,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #ifndef _LINUX_I2C_SMBUS_H diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 8e25a9167f13..195d8b3d9cfb 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -17,7 +17,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and diff --git a/include/linux/i2c/at24.h b/include/linux/i2c/at24.h index 8ace93024d60..285025a9cdc9 100644 --- a/include/linux/i2c/at24.h +++ b/include/linux/i2c/at24.h @@ -1,19 +1,42 @@ +/* + * at24.h - platform_data for the at24 (generic eeprom) driver + * (C) Copyright 2008 by Pengutronix + * (C) Copyright 2012 by Wolfram Sang + * same license as the driver + */ + #ifndef _LINUX_AT24_H #define _LINUX_AT24_H #include <linux/types.h> #include <linux/memory.h> -/* - * As seen through Linux I2C, differences between the most common types of I2C - * memory include: - * - How much memory is available (usually specified in bit)? - * - What write page size does it support? - * - Special flags (16 bit addresses, read_only, world readable...)? +/** + * struct at24_platform_data - data to set up at24 (generic eeprom) driver + * @byte_len: size of eeprom in byte + * @page_size: number of byte which can be written in one go + * @flags: tunable options, check AT24_FLAG_* defines + * @setup: an optional callback invoked after eeprom is probed; enables kernel + code to access eeprom via memory_accessor, see example + * @context: optional parameter passed to setup() * * If you set up a custom eeprom type, please double-check the parameters. * Especially page_size needs extra care, as you risk data loss if your value * is bigger than what the chip actually supports! + * + * An example in pseudo code for a setup() callback: + * + * void get_mac_addr(struct memory_accessor *mem_acc, void *context) + * { + * u8 *mac_addr = ethernet_pdata->mac_addr; + * off_t offset = context; + * + * // Read MAC addr from EEPROM + * if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); + * } + * + * This function pointer and context can now be set up in at24_platform_data. */ struct at24_platform_data { diff --git a/include/linux/i2c/tc35876x.h b/include/linux/i2c/tc35876x.h new file mode 100644 index 000000000000..cd6a51c71e7e --- /dev/null +++ b/include/linux/i2c/tc35876x.h @@ -0,0 +1,11 @@ + +#ifndef _TC35876X_H +#define _TC35876X_H + +struct tc35876x_platform_data { + int gpio_bridge_reset; + int gpio_panel_bl_en; + int gpio_panel_vadd; +}; + +#endif /* _TC35876X_H */ diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 7fcab23c59ce..2463b6100333 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -761,7 +761,7 @@ struct twl_regulator_driver_data { /*----------------------------------------------------------------------*/ -int twl4030_sih_setup(int module); +int twl4030_sih_setup(struct device *dev, int module, int irq_base); /* Offsets to Power Registers */ #define TWL4030_VDAC_DEV_GRP 0x3B diff --git a/include/linux/i2o.h b/include/linux/i2o.h index a6deef4f4f67..d23c3c20b201 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -24,6 +24,7 @@ #define I2O_MAX_DRIVERS 8 #include <linux/pci.h> +#include <linux/bug.h> #include <linux/dma-mapping.h> #include <linux/string.h> #include <linux/slab.h> diff --git a/include/linux/ide.h b/include/linux/ide.h index 501370b61ee5..b17974917dbf 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -14,7 +14,6 @@ #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/bio.h> -#include <linux/device.h> #include <linux/pci.h> #include <linux/completion.h> #include <linux/pm.h> @@ -23,7 +22,6 @@ #include <acpi/acpi.h> #endif #include <asm/byteorder.h> -#include <asm/system.h> #include <asm/io.h> /* for request_sense */ @@ -43,6 +41,8 @@ #define ERROR_RESET 3 /* Reset controller every 4th retry */ #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */ +struct device; + /* Error codes returned in rq->errors to the higher part of the driver. */ enum { IDE_DRV_ERROR_GENERAL = 101, diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h index 79c4f268410d..18a5d02a8644 100644 --- a/include/linux/if_eql.h +++ b/include/linux/if_eql.h @@ -22,7 +22,7 @@ #define EQL_DEFAULT_SLAVE_PRIORITY 28800 #define EQL_DEFAULT_MAX_SLAVES 4 #define EQL_DEFAULT_MTU 576 -#define EQL_DEFAULT_RESCHED_IVAL 100 +#define EQL_DEFAULT_RESCHED_IVAL HZ #define EQL_ENSLAVE (SIOCDEVPRIVATE) #define EQL_EMANCIPATE (SIOCDEVPRIVATE + 1) diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index 33a6e1951d4d..a810987cb80e 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -17,6 +17,7 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/rtnetlink.h> +#include <linux/bug.h> #define VLAN_HLEN 4 /* The additional bytes required by VLAN * (in addition to the Ethernet header) diff --git a/include/linux/init_task.h b/include/linux/init_task.h index f994d51f70f2..e4baff5f7ff4 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -29,6 +29,13 @@ extern struct fs_struct init_fs; #define INIT_GROUP_RWSEM(sig) #endif +#ifdef CONFIG_CPUSETS +#define INIT_CPUSET_SEQ \ + .mems_allowed_seq = SEQCNT_ZERO, +#else +#define INIT_CPUSET_SEQ +#endif + #define INIT_SIGNALS(sig) { \ .nr_threads = 1, \ .wait_chldexit = __WAIT_QUEUE_HEAD_INITIALIZER(sig.wait_chldexit),\ @@ -192,6 +199,7 @@ extern struct cred init_cred; INIT_FTRACE_GRAPH \ INIT_TRACE_RECURSION \ INIT_TASK_RCU_PREEMPT(tsk) \ + INIT_CPUSET_SEQ \ } diff --git a/include/linux/input.h b/include/linux/input.h index 3862e32c4eeb..a81671453575 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -114,6 +114,31 @@ struct input_keymap_entry { #define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ #define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ +/** + * EVIOCGMTSLOTS(len) - get MT slot values + * + * The ioctl buffer argument should be binary equivalent to + * + * struct input_mt_request_layout { + * __u32 code; + * __s32 values[num_slots]; + * }; + * + * where num_slots is the (arbitrary) number of MT slots to extract. + * + * The ioctl size argument (len) is the size of the buffer, which + * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is + * too small to fit all available slots, the first num_slots are + * returned. + * + * Before the call, code is set to the wanted ABS_MT event type. On + * return, values[] is filled with the slot values for the specified + * ABS_MT code. + * + * If the request code is not an ABS_MT value, -EINVAL is returned. + */ +#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) + #define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ #define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ @@ -129,6 +154,8 @@ struct input_keymap_entry { #define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ +#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ + /* * Device properties and quirks */ diff --git a/include/linux/input/cyttsp.h b/include/linux/input/cyttsp.h new file mode 100644 index 000000000000..5af7c66f1fca --- /dev/null +++ b/include/linux/input/cyttsp.h @@ -0,0 +1,58 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) + * + */ +#ifndef _CYTTSP_H_ +#define _CYTTSP_H_ + +#define CY_SPI_NAME "cyttsp-spi" +#define CY_I2C_NAME "cyttsp-i2c" +/* Active Power state scanning/processing refresh interval */ +#define CY_ACT_INTRVL_DFLT 0x00 /* ms */ +/* touch timeout for the Active power */ +#define CY_TCH_TMOUT_DFLT 0xFF /* ms */ +/* Low Power state scanning/processing refresh interval */ +#define CY_LP_INTRVL_DFLT 0x0A /* ms */ +/* Active distance in pixels for a gesture to be reported */ +#define CY_ACT_DIST_DFLT 0xF8 /* pixels */ + +struct cyttsp_platform_data { + u32 maxx; + u32 maxy; + bool use_hndshk; + u8 act_dist; /* Active distance */ + u8 act_intrvl; /* Active refresh interval; ms */ + u8 tch_tmout; /* Active touch timeout; ms */ + u8 lp_intrvl; /* Low power refresh interval; ms */ + int (*init)(void); + void (*exit)(void); + char *name; + s16 irq_gpio; + u8 *bl_keys; +}; + +#endif /* _CYTTSP_H_ */ diff --git a/include/linux/input/ili210x.h b/include/linux/input/ili210x.h new file mode 100644 index 000000000000..a5471245a13c --- /dev/null +++ b/include/linux/input/ili210x.h @@ -0,0 +1,10 @@ +#ifndef _ILI210X_H +#define _ILI210X_H + +struct ili210x_platform_data { + unsigned long irq_flags; + unsigned int poll_period; + bool (*get_pendown_state)(void); +}; + +#endif diff --git a/include/linux/input/kxtj9.h b/include/linux/input/kxtj9.h index f6bac89537b8..d415579b56fe 100644 --- a/include/linux/input/kxtj9.h +++ b/include/linux/input/kxtj9.h @@ -24,6 +24,7 @@ struct kxtj9_platform_data { unsigned int min_interval; /* minimum poll interval (in milli-seconds) */ + unsigned int init_interval; /* initial poll interval (in milli-seconds) */ /* * By default, x is axis 0, y is axis 1, z is axis 2; these can be @@ -52,16 +53,6 @@ struct kxtj9_platform_data { #define KXTJ9_G_8G (1 << 4) u8 g_range; - /* DATA_CTRL_REG: controls the output data rate of the part */ - #define ODR12_5F 0 - #define ODR25F 1 - #define ODR50F 2 - #define ODR100F 3 - #define ODR200F 4 - #define ODR400F 5 - #define ODR800F 6 - u8 data_odr_init; - int (*init)(void); void (*exit)(void); int (*power_on)(void); diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index fe7c4b9ae270..6c07ced0af81 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -3,6 +3,7 @@ #include <linux/types.h> #include <linux/input.h> +#include <linux/of.h> #define MATRIX_MAX_ROWS 32 #define MATRIX_MAX_COLS 32 @@ -106,4 +107,22 @@ matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, __clear_bit(KEY_RESERVED, keybit); } +#ifdef CONFIG_INPUT_OF_MATRIX_KEYMAP +struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname); + +void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd); +#else +static inline struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname) +{ + return NULL; +} + +static inline void +matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd) +{ +} +#endif + #endif /* _MATRIX_KEYPAD_H */ diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index 318bb82325a6..f86737586e19 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -48,10 +48,14 @@ static inline void input_mt_slot(struct input_dev *dev, int slot) input_event(dev, EV_ABS, ABS_MT_SLOT, slot); } +static inline bool input_is_mt_value(int axis) +{ + return axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST; +} + static inline bool input_is_mt_axis(int axis) { - return axis == ABS_MT_SLOT || - (axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST); + return axis == ABS_MT_SLOT || input_is_mt_value(axis); } void input_mt_report_slot_state(struct input_dev *dev, diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h new file mode 100644 index 000000000000..b10a527a92a4 --- /dev/null +++ b/include/linux/input/ti_tscadc.h @@ -0,0 +1,17 @@ +#ifndef __LINUX_TI_TSCADC_H +#define __LINUX_TI_TSCADC_H + +/** + * struct tsc_data Touchscreen wire configuration + * @wires: Wires refer to application modes + * i.e. 4/5/8 wire touchscreen support + * on the platform. + * @x_plate_resistance: X plate resistance. + */ + +struct tsc_data { + int wires; + int x_plate_resistance; +}; + +#endif diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 3f830e005118..2aea5d22db07 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -19,7 +19,6 @@ #include <linux/atomic.h> #include <asm/ptrace.h> -#include <asm/system.h> /* * These correspond to the IORESOURCE_IRQ_* defines in diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index e44e84f0156c..657fab4efab3 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -20,6 +20,7 @@ #include <linux/types.h> #include <linux/slab.h> +#include <linux/bug.h> #include <asm/io.h> #include <asm/page.h> diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 9d57a71775b5..e885ba23de70 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -23,12 +23,6 @@ struct resource { struct resource *parent, *sibling, *child; }; -struct resource_list { - struct resource_list *next; - struct resource *res; - struct pci_dev *dev; -}; - /* * IO resources have these defined flags. */ diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index bbd156bb953b..48dcba9b2065 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -220,10 +220,10 @@ struct kernel_ipmi_msg { * The in-kernel interface. */ #include <linux/list.h> -#include <linux/device.h> #include <linux/proc_fs.h> struct module; +struct device; /* Opaque type for a IPMI message user. One of these is needed to send and receive messages. */ diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index 3ef0d8b6aa6f..fcb5d44ea635 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -36,10 +36,11 @@ #include <linux/ipmi_msgdefs.h> #include <linux/proc_fs.h> -#include <linux/device.h> #include <linux/platform_device.h> #include <linux/ipmi.h> +struct device; + /* This files describes the interface for IPMI system management interface drivers to bind into the IPMI message handler. */ diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h index 062d20f74322..42bf725751af 100644 --- a/include/linux/ivtv.h +++ b/include/linux/ivtv.h @@ -58,7 +58,11 @@ struct ivtv_dma_frame { __u32 src_height; }; -#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame) +#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame) + +/* Select the passthrough mode (if the argument is non-zero). In the passthrough + mode the output of the encoder is passed immediately into the decoder. */ +#define IVTV_IOC_PASSTHROUGH_MODE _IOW ('V', BASE_VIDIOC_PRIVATE+1, int) /* Deprecated defines: applications should use the defines from videodev2.h */ #define IVTV_SLICED_TYPE_TELETEXT_B V4L2_MPEG_VBI_IVTV_TELETEXT_B diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 5557baefed60..912c30a8ddb1 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -971,6 +971,10 @@ extern void __journal_clean_data_list(transaction_t *transaction); /* Log buffer allocation */ extern struct journal_head * jbd2_journal_get_descriptor_buffer(journal_t *); int jbd2_journal_next_log_block(journal_t *, unsigned long long *); +int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid, + unsigned long *block); +void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block); +void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block); /* Commit management */ extern void jbd2_journal_commit_transaction(journal_t *); @@ -1020,6 +1024,11 @@ jbd2_journal_write_metadata_buffer(transaction_t *transaction, /* Transaction locking */ extern void __wait_on_journal (journal_t *); +/* Transaction cache support */ +extern void jbd2_journal_destroy_transaction_cache(void); +extern int jbd2_journal_init_transaction_cache(void); +extern void jbd2_journal_free_transaction(transaction_t *); + /* * Journal locking. * @@ -1082,7 +1091,8 @@ extern int jbd2_journal_destroy (journal_t *); extern int jbd2_journal_recover (journal_t *journal); extern int jbd2_journal_wipe (journal_t *, int); extern int jbd2_journal_skip_recovery (journal_t *); -extern void jbd2_journal_update_superblock (journal_t *, int); +extern void jbd2_journal_update_sb_log_tail (journal_t *, tid_t, + unsigned long, int); extern void __jbd2_journal_abort_hard (journal_t *); extern void jbd2_journal_abort (journal_t *, int); extern int jbd2_journal_errno (journal_t *); diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h index 423cb6d78ee0..c18b46f8aeeb 100644 --- a/include/linux/journal-head.h +++ b/include/linux/journal-head.h @@ -66,6 +66,8 @@ struct journal_head { * transaction (if there is one). Only applies to buffers on a * transaction's data or metadata journaling list. * [j_list_lock] [jbd_lock_bh_state()] + * Either of these locks is enough for reading, both are needed for + * changes. */ transaction_t *b_transaction; diff --git a/include/linux/jz4740-adc.h b/include/linux/jz4740-adc.h index 9053f95e9687..8184578fbfa4 100644 --- a/include/linux/jz4740-adc.h +++ b/include/linux/jz4740-adc.h @@ -2,7 +2,7 @@ #ifndef __LINUX_JZ4740_ADC #define __LINUX_JZ4740_ADC -#include <linux/device.h> +struct device; /* * jz4740_adc_set_config - Configure a JZ4740 adc device diff --git a/include/linux/kernel-page-flags.h b/include/linux/kernel-page-flags.h index bd92a89f4b0a..26a65711676f 100644 --- a/include/linux/kernel-page-flags.h +++ b/include/linux/kernel-page-flags.h @@ -30,6 +30,7 @@ #define KPF_NOPAGE 20 #define KPF_KSM 21 +#define KPF_THP 22 /* kernel hacking assistances * WARNING: subject to change, never rely on them! diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d801acb5e680..645231c373c8 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -1,6 +1,8 @@ #ifndef _LINUX_KERNEL_H #define _LINUX_KERNEL_H +#include <linux/sysinfo.h> + /* * 'kernel.h' contains some often-used function prototypes etc */ @@ -20,7 +22,6 @@ #include <linux/printk.h> #include <linux/dynamic_debug.h> #include <asm/byteorder.h> -#include <asm/bug.h> #define USHRT_MAX ((u16)(~0U)) #define SHRT_MAX ((s16)(USHRT_MAX>>1)) @@ -312,6 +313,8 @@ extern long long simple_strtoll(const char *,char **,unsigned int); #define strict_strtoull kstrtoull #define strict_strtoll kstrtoll +extern int num_to_str(char *buf, int size, unsigned long long num); + /* lib/printf utilities */ extern __printf(2, 3) int sprintf(char *buf, const char * fmt, ...); @@ -328,10 +331,10 @@ extern __printf(2, 3) char *kasprintf(gfp_t gfp, const char *fmt, ...); extern char *kvasprintf(gfp_t gfp, const char *fmt, va_list args); -extern int sscanf(const char *, const char *, ...) - __attribute__ ((format (scanf, 2, 3))); -extern int vsscanf(const char *, const char *, va_list) - __attribute__ ((format (scanf, 2, 0))); +extern __scanf(2, 3) +int sscanf(const char *, const char *, ...); +extern __scanf(2, 0) +int vsscanf(const char *, const char *, va_list); extern int get_option(char **str, int *pint); extern char *get_options(const char *str, int nints, int *ints); @@ -427,16 +430,10 @@ extern int __must_check hex2bin(u8 *dst, const char *src, size_t count); * Most likely, you want to use tracing_on/tracing_off. */ #ifdef CONFIG_RING_BUFFER -void tracing_on(void); -void tracing_off(void); /* trace_off_permanent stops recording with no way to bring it back */ void tracing_off_permanent(void); -int tracing_is_on(void); #else -static inline void tracing_on(void) { } -static inline void tracing_off(void) { } static inline void tracing_off_permanent(void) { } -static inline int tracing_is_on(void) { return 0; } #endif enum ftrace_dump_mode { @@ -446,6 +443,10 @@ enum ftrace_dump_mode { }; #ifdef CONFIG_TRACING +void tracing_on(void); +void tracing_off(void); +int tracing_is_on(void); + extern void tracing_start(void); extern void tracing_stop(void); extern void ftrace_off_permanent(void); @@ -530,6 +531,11 @@ static inline void tracing_start(void) { } static inline void tracing_stop(void) { } static inline void ftrace_off_permanent(void) { } static inline void trace_dump_stack(void) { } + +static inline void tracing_on(void) { } +static inline void tracing_off(void) { } +static inline int tracing_is_on(void) { return 0; } + static inline int trace_printk(const char *fmt, ...) { @@ -675,67 +681,6 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } const typeof( ((type *)0)->member ) *__mptr = (ptr); \ (type *)( (char *)__mptr - offsetof(type,member) );}) -#ifdef __CHECKER__ -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) -#define BUILD_BUG_ON_ZERO(e) (0) -#define BUILD_BUG_ON_NULL(e) ((void*)0) -#define BUILD_BUG_ON(condition) -#define BUILD_BUG() (0) -#else /* __CHECKER__ */ - -/* Force a compilation error if a constant expression is not a power of 2 */ -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ - BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) - -/* Force a compilation error if condition is true, but also produce a - result (of value 0 and type size_t), so the expression can be used - e.g. in a structure initializer (or where-ever else comma expressions - aren't permitted). */ -#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) -#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) - -/** - * BUILD_BUG_ON - break compile if a condition is true. - * @condition: the condition which the compiler should know is false. - * - * If you have some code which relies on certain constants being equal, or - * other compile-time-evaluated condition, you should use BUILD_BUG_ON to - * detect if someone changes it. - * - * The implementation uses gcc's reluctance to create a negative array, but - * gcc (as of 4.4) only emits that error for obvious cases (eg. not arguments - * to inline functions). So as a fallback we use the optimizer; if it can't - * prove the condition is false, it will cause a link error on the undefined - * "__build_bug_on_failed". This error message can be harder to track down - * though, hence the two different methods. - */ -#ifndef __OPTIMIZE__ -#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) -#else -extern int __build_bug_on_failed; -#define BUILD_BUG_ON(condition) \ - do { \ - ((void)sizeof(char[1 - 2*!!(condition)])); \ - if (condition) __build_bug_on_failed = 1; \ - } while(0) -#endif - -/** - * BUILD_BUG - break compile if used. - * - * If you have some code that you expect the compiler to eliminate at - * build time, you should use BUILD_BUG to detect if it is - * unexpectedly used. - */ -#define BUILD_BUG() \ - do { \ - extern void __build_bug_failed(void) \ - __linktime_error("BUILD_BUG failed"); \ - __build_bug_failed(); \ - } while (0) - -#endif /* __CHECKER__ */ - /* Trap pasters of __FUNCTION__ at compile-time */ #define __FUNCTION__ (__func__) @@ -758,27 +703,8 @@ extern int __build_bug_on_failed; # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD #endif -struct sysinfo; extern int do_sysinfo(struct sysinfo *info); #endif /* __KERNEL__ */ -#define SI_LOAD_SHIFT 16 -struct sysinfo { - long uptime; /* Seconds since boot */ - unsigned long loads[3]; /* 1, 5, and 15 minute load averages */ - unsigned long totalram; /* Total usable main memory size */ - unsigned long freeram; /* Available memory size */ - unsigned long sharedram; /* Amount of shared memory */ - unsigned long bufferram; /* Memory used by buffers */ - unsigned long totalswap; /* Total swap space size */ - unsigned long freeswap; /* swap space still available */ - unsigned short procs; /* Number of current processes */ - unsigned short pad; /* explicit padding for m68k */ - unsigned long totalhigh; /* Total high memory size */ - unsigned long freehigh; /* Available high memory size */ - unsigned int mem_unit; /* Memory unit size in bytes */ - char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */ -}; - #endif diff --git a/include/linux/key.h b/include/linux/key.h index 1600ebf717a7..96933b1e5d24 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -277,6 +277,8 @@ static inline key_serial_t key_serial(const struct key *key) return key ? key->serial : 0; } +extern void key_set_timeout(struct key *, unsigned); + /** * key_is_instantiated - Determine if a key has been positively instantiated * @key: The key to check. diff --git a/include/linux/kmod.h b/include/linux/kmod.h index 722f477c4ef7..9efeae679106 100644 --- a/include/linux/kmod.h +++ b/include/linux/kmod.h @@ -48,11 +48,10 @@ static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; struct cred; struct file; -enum umh_wait { - UMH_NO_WAIT = -1, /* don't wait at all */ - UMH_WAIT_EXEC = 0, /* wait for the exec, but not the process */ - UMH_WAIT_PROC = 1, /* wait for the process to complete */ -}; +#define UMH_NO_WAIT 0 /* don't wait at all */ +#define UMH_WAIT_EXEC 1 /* wait for the exec, but not the process */ +#define UMH_WAIT_PROC 2 /* wait for the process to complete */ +#define UMH_KILLABLE 4 /* wait for EXEC/PROC killable */ struct subprocess_info { struct work_struct work; @@ -60,7 +59,7 @@ struct subprocess_info { char *path; char **argv; char **envp; - enum umh_wait wait; + int wait; int retval; int (*init)(struct subprocess_info *info, struct cred *new); void (*cleanup)(struct subprocess_info *info); @@ -78,15 +77,14 @@ void call_usermodehelper_setfns(struct subprocess_info *info, void *data); /* Actually execute the sub-process */ -int call_usermodehelper_exec(struct subprocess_info *info, enum umh_wait wait); +int call_usermodehelper_exec(struct subprocess_info *info, int wait); /* Free the subprocess_info. This is only needed if you're not going to call call_usermodehelper_exec */ void call_usermodehelper_freeinfo(struct subprocess_info *info); static inline int -call_usermodehelper_fns(char *path, char **argv, char **envp, - enum umh_wait wait, +call_usermodehelper_fns(char *path, char **argv, char **envp, int wait, int (*init)(struct subprocess_info *info, struct cred *new), void (*cleanup)(struct subprocess_info *), void *data) { @@ -104,7 +102,7 @@ call_usermodehelper_fns(char *path, char **argv, char **envp, } static inline int -call_usermodehelper(char *path, char **argv, char **envp, enum umh_wait wait) +call_usermodehelper(char *path, char **argv, char **envp, int wait) { return call_usermodehelper_fns(path, argv, envp, wait, NULL, NULL, NULL); diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index dce6e4dbeda7..b6e1f8c00577 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -33,6 +33,7 @@ #include <linux/list.h> #include <linux/notifier.h> #include <linux/smp.h> +#include <linux/bug.h> #include <linux/percpu.h> #include <linux/spinlock.h> #include <linux/rcupdate.h> diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 68e67e50d028..6c322a90b92f 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -162,6 +162,7 @@ struct kvm_pit_config { #define KVM_EXIT_INTERNAL_ERROR 17 #define KVM_EXIT_OSI 18 #define KVM_EXIT_PAPR_HCALL 19 +#define KVM_EXIT_S390_UCONTROL 20 /* For KVM_EXIT_INTERNAL_ERROR */ #define KVM_INTERNAL_ERROR_EMULATION 1 @@ -249,6 +250,11 @@ struct kvm_run { #define KVM_S390_RESET_CPU_INIT 8 #define KVM_S390_RESET_IPL 16 __u64 s390_reset_flags; + /* KVM_EXIT_S390_UCONTROL */ + struct { + __u64 trans_exc_code; + __u32 pgm_code; + } s390_ucontrol; /* KVM_EXIT_DCR */ struct { __u32 dcrn; @@ -273,6 +279,20 @@ struct kvm_run { /* Fix the size of the union. */ char padding[256]; }; + + /* + * shared registers between kvm and userspace. + * kvm_valid_regs specifies the register classes set by the host + * kvm_dirty_regs specified the register classes dirtied by userspace + * struct kvm_sync_regs is architecture specific, as well as the + * bits for kvm_valid_regs and kvm_dirty_regs + */ + __u64 kvm_valid_regs; + __u64 kvm_dirty_regs; + union { + struct kvm_sync_regs regs; + char padding[1024]; + } s; }; /* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */ @@ -431,6 +451,11 @@ struct kvm_ppc_pvinfo { #define KVMIO 0xAE +/* machine type bits, to be used as argument to KVM_CREATE_VM */ +#define KVM_VM_S390_UCONTROL 1 + +#define KVM_S390_SIE_PAGE_OFFSET 1 + /* * ioctls for /dev/kvm fds: */ @@ -555,9 +580,15 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_PPC_SMT 64 #define KVM_CAP_PPC_RMA 65 #define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ +#define KVM_CAP_PPC_HIOR 67 #define KVM_CAP_PPC_PAPR 68 +#define KVM_CAP_SW_TLB 69 +#define KVM_CAP_ONE_REG 70 #define KVM_CAP_S390_GMAP 71 #define KVM_CAP_TSC_DEADLINE_TIMER 72 +#define KVM_CAP_S390_UCONTROL 73 +#define KVM_CAP_SYNC_REGS 74 +#define KVM_CAP_PCI_2_3 75 #ifdef KVM_CAP_IRQ_ROUTING @@ -637,6 +668,52 @@ struct kvm_clock_data { __u32 pad[9]; }; +#define KVM_MMU_FSL_BOOKE_NOHV 0 +#define KVM_MMU_FSL_BOOKE_HV 1 + +struct kvm_config_tlb { + __u64 params; + __u64 array; + __u32 mmu_type; + __u32 array_len; +}; + +struct kvm_dirty_tlb { + __u64 bitmap; + __u32 num_dirty; +}; + +/* Available with KVM_CAP_ONE_REG */ + +#define KVM_REG_ARCH_MASK 0xff00000000000000ULL +#define KVM_REG_GENERIC 0x0000000000000000ULL + +/* + * Architecture specific registers are to be defined in arch headers and + * ORed with the arch identifier. + */ +#define KVM_REG_PPC 0x1000000000000000ULL +#define KVM_REG_X86 0x2000000000000000ULL +#define KVM_REG_IA64 0x3000000000000000ULL +#define KVM_REG_ARM 0x4000000000000000ULL +#define KVM_REG_S390 0x5000000000000000ULL + +#define KVM_REG_SIZE_SHIFT 52 +#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL +#define KVM_REG_SIZE_U8 0x0000000000000000ULL +#define KVM_REG_SIZE_U16 0x0010000000000000ULL +#define KVM_REG_SIZE_U32 0x0020000000000000ULL +#define KVM_REG_SIZE_U64 0x0030000000000000ULL +#define KVM_REG_SIZE_U128 0x0040000000000000ULL +#define KVM_REG_SIZE_U256 0x0050000000000000ULL +#define KVM_REG_SIZE_U512 0x0060000000000000ULL +#define KVM_REG_SIZE_U1024 0x0070000000000000ULL + +struct kvm_one_reg { + __u64 id; + __u64 addr; +}; + /* * ioctls for VM fds */ @@ -655,6 +732,17 @@ struct kvm_clock_data { struct kvm_userspace_memory_region) #define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) #define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64) + +/* enable ucontrol for s390 */ +struct kvm_s390_ucas_mapping { + __u64 user_addr; + __u64 vcpu_addr; + __u64 length; +}; +#define KVM_S390_UCAS_MAP _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping) +#define KVM_S390_UCAS_UNMAP _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping) +#define KVM_S390_VCPU_FAULT _IOW(KVMIO, 0x52, unsigned long) + /* Device model IOC */ #define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60) #define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level) @@ -697,6 +785,9 @@ struct kvm_clock_data { /* Available with KVM_CAP_TSC_CONTROL */ #define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) #define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) +/* Available with KVM_CAP_PCI_2_3 */ +#define KVM_ASSIGN_SET_INTX_MASK _IOW(KVMIO, 0xa4, \ + struct kvm_assigned_pci_dev) /* * ioctls for vcpu fds @@ -763,8 +854,15 @@ struct kvm_clock_data { #define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) /* Available with KVM_CAP_RMA */ #define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) +/* Available with KVM_CAP_SW_TLB */ +#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) +/* Available with KVM_CAP_ONE_REG */ +#define KVM_GET_ONE_REG _IOW(KVMIO, 0xab, struct kvm_one_reg) +#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg) #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) +#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) +#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2) struct kvm_assigned_pci_dev { __u32 assigned_dev_id; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 900c76337e8f..665a260c7e09 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -13,6 +13,7 @@ #include <linux/spinlock.h> #include <linux/signal.h> #include <linux/sched.h> +#include <linux/bug.h> #include <linux/mm.h> #include <linux/mmu_notifier.h> #include <linux/preempt.h> @@ -171,11 +172,6 @@ static inline int kvm_vcpu_exiting_guest_mode(struct kvm_vcpu *vcpu) */ #define KVM_MEM_MAX_NR_PAGES ((1UL << 31) - 1) -struct kvm_lpage_info { - unsigned long rmap_pde; - int write_count; -}; - struct kvm_memory_slot { gfn_t base_gfn; unsigned long npages; @@ -184,7 +180,7 @@ struct kvm_memory_slot { unsigned long *dirty_bitmap; unsigned long *dirty_bitmap_head; unsigned long nr_dirty_pages; - struct kvm_lpage_info *lpage_info[KVM_NR_PAGE_SIZES - 1]; + struct kvm_arch_memory_slot arch; unsigned long userspace_addr; int user_alloc; int id; @@ -376,6 +372,9 @@ int kvm_set_memory_region(struct kvm *kvm, int __kvm_set_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, int user_alloc); +void kvm_arch_free_memslot(struct kvm_memory_slot *free, + struct kvm_memory_slot *dont); +int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages); int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_memory_slot old, @@ -385,6 +384,7 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, struct kvm_memory_slot old, int user_alloc); +bool kvm_largepages_enabled(void); void kvm_disable_largepages(void); void kvm_arch_flush_shadow(struct kvm *kvm); @@ -450,6 +450,7 @@ long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); +int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf); int kvm_dev_ioctl_check_extension(long ext); @@ -520,7 +521,7 @@ static inline void kvm_arch_free_vm(struct kvm *kvm) } #endif -int kvm_arch_init_vm(struct kvm *kvm); +int kvm_arch_init_vm(struct kvm *kvm, unsigned long type); void kvm_arch_destroy_vm(struct kvm *kvm); void kvm_free_all_assigned_devices(struct kvm *kvm); void kvm_arch_sync_events(struct kvm *kvm); @@ -546,6 +547,7 @@ struct kvm_assigned_dev_kernel { unsigned int entries_nr; int host_irq; bool host_irq_disabled; + bool pci_2_3; struct msix_entry *host_msix_entries; int guest_irq; struct msix_entry *guest_msix_entries; @@ -555,6 +557,7 @@ struct kvm_assigned_dev_kernel { struct pci_dev *dev; struct kvm *kvm; spinlock_t intx_lock; + spinlock_t intx_mask_lock; char irq_name[32]; struct pci_saved_state *pci_saved_state; }; @@ -650,11 +653,43 @@ static inline void kvm_guest_exit(void) current->flags &= ~PF_VCPU; } +/* + * search_memslots() and __gfn_to_memslot() are here because they are + * used in non-modular code in arch/powerpc/kvm/book3s_hv_rm_mmu.c. + * gfn_to_memslot() itself isn't here as an inline because that would + * bloat other code too much. + */ +static inline struct kvm_memory_slot * +search_memslots(struct kvm_memslots *slots, gfn_t gfn) +{ + struct kvm_memory_slot *memslot; + + kvm_for_each_memslot(memslot, slots) + if (gfn >= memslot->base_gfn && + gfn < memslot->base_gfn + memslot->npages) + return memslot; + + return NULL; +} + +static inline struct kvm_memory_slot * +__gfn_to_memslot(struct kvm_memslots *slots, gfn_t gfn) +{ + return search_memslots(slots, gfn); +} + static inline int memslot_id(struct kvm *kvm, gfn_t gfn) { return gfn_to_memslot(kvm, gfn)->id; } +static inline gfn_t gfn_to_index(gfn_t gfn, gfn_t base_gfn, int level) +{ + /* KVM_HPAGE_GFN_SHIFT(PT_PAGE_TABLE_LEVEL) must be 0. */ + return (gfn >> KVM_HPAGE_GFN_SHIFT(level)) - + (base_gfn >> KVM_HPAGE_GFN_SHIFT(level)); +} + static inline unsigned long gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn) { @@ -701,12 +736,16 @@ static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_se if (unlikely(vcpu->kvm->mmu_notifier_count)) return 1; /* - * Both reads happen under the mmu_lock and both values are - * modified under mmu_lock, so there's no need of smb_rmb() - * here in between, otherwise mmu_notifier_count should be - * read before mmu_notifier_seq, see - * mmu_notifier_invalidate_range_end write side. + * Ensure the read of mmu_notifier_count happens before the read + * of mmu_notifier_seq. This interacts with the smp_wmb() in + * mmu_notifier_invalidate_range_end to make sure that the caller + * either sees the old (non-zero) value of mmu_notifier_count or + * the new (incremented) value of mmu_notifier_seq. + * PowerPC Book3s HV KVM calls this under a per-page lock + * rather than under kvm->mmu_lock, for scalability, so + * can't rely on kvm->mmu_lock to keep things ordered. */ + smp_rmb(); if (vcpu->kvm->mmu_notifier_seq != mmu_seq) return 1; return 0; @@ -769,6 +808,13 @@ static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu) { return vcpu->kvm->bsp_vcpu_id == vcpu->vcpu_id; } + +bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu); + +#else + +static inline bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu) { return true; } + #endif #ifdef __KVM_HAVE_DEVICE_ASSIGNMENT diff --git a/include/linux/led-lm3530.h b/include/linux/led-lm3530.h index 8eb12357a110..eeae6e742471 100644 --- a/include/linux/led-lm3530.h +++ b/include/linux/led-lm3530.h @@ -72,6 +72,12 @@ enum lm3530_als_mode { LM3530_INPUT_CEIL, /* Max of ALS1 and ALS2 */ }; +/* PWM Platform Specific Data */ +struct lm3530_pwm_data { + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (int max_brightness); +}; + /** * struct lm3530_platform_data * @mode: mode of operation i.e. Manual, ALS or PWM @@ -87,6 +93,7 @@ enum lm3530_als_mode { * @als_vmin: als input voltage calibrated for max brightness in mV * @als_vmax: als input voltage calibrated for min brightness in mV * @brt_val: brightness value (0-255) + * @pwm_data: PWM control functions (only valid when the mode is PWM) */ struct lm3530_platform_data { enum lm3530_mode mode; @@ -107,6 +114,8 @@ struct lm3530_platform_data { u32 als_vmax; u8 brt_val; + + struct lm3530_pwm_data pwm_data; }; #endif /* _LINUX_LED_LM3530_H__ */ diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h index fd548d2a8775..3f071ec019b2 100644 --- a/include/linux/leds-lp5521.h +++ b/include/linux/leds-lp5521.h @@ -26,15 +26,37 @@ /* See Documentation/leds/leds-lp5521.txt */ struct lp5521_led_config { + char *name; u8 chan_nr; u8 led_current; /* mA x10, 0 if led is not connected */ u8 max_current; }; +struct lp5521_led_pattern { + u8 *r; + u8 *g; + u8 *b; + u8 size_r; + u8 size_g; + u8 size_b; +}; + #define LP5521_CLOCK_AUTO 0 #define LP5521_CLOCK_INT 1 #define LP5521_CLOCK_EXT 2 +/* Bits in CONFIG register */ +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ +#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ +#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ +#define LP5521_CLK_INT 1 /* Internal clock */ +#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ + struct lp5521_platform_data { struct lp5521_led_config *led_config; u8 num_channels; @@ -43,6 +65,9 @@ struct lp5521_platform_data { void (*release_resources)(void); void (*enable)(bool state); const char *label; + u8 update_config; + struct lp5521_led_pattern *patterns; + int num_patterns; }; #endif /* __LINUX_LP5521_H */ diff --git a/include/linux/libata.h b/include/linux/libata.h index cafc09a64fe4..42378d637ffb 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -996,6 +996,7 @@ extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); +extern int ata_sas_async_port_init(struct ata_port *); extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); extern void ata_sas_port_stop(struct ata_port *ap); @@ -1147,6 +1148,7 @@ static inline int ata_acpi_cbl_80wire(struct ata_port *ap, * EH - drivers/ata/libata-eh.c */ extern void ata_port_schedule_eh(struct ata_port *ap); +extern void ata_port_wait_eh(struct ata_port *ap); extern int ata_link_abort(struct ata_link *link); extern int ata_port_abort(struct ata_port *ap); extern int ata_port_freeze(struct ata_port *ap); diff --git a/include/linux/llist.h b/include/linux/llist.h index 801b44b07aac..a5199f6d0e82 100644 --- a/include/linux/llist.h +++ b/include/linux/llist.h @@ -56,8 +56,7 @@ */ #include <linux/kernel.h> -#include <asm/system.h> -#include <asm/processor.h> +#include <asm/cmpxchg.h> struct llist_head { struct llist_node *first; diff --git a/include/linux/lockd/bind.h b/include/linux/lockd/bind.h index fbc48f898521..11a966e5f829 100644 --- a/include/linux/lockd/bind.h +++ b/include/linux/lockd/bind.h @@ -42,6 +42,7 @@ struct nlmclnt_initdata { unsigned short protocol; u32 nfs_version; int noresvport; + struct net *net; }; /* diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 88a114fce477..f04ce6ac6d04 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -67,6 +67,7 @@ struct nlm_host { struct list_head h_reclaim; /* Locks in RECLAIM state */ struct nsm_handle *h_nsmhandle; /* NSM status handle */ char *h_addrbuf; /* address eyecatcher */ + struct net *net; /* host net */ }; /* @@ -188,7 +189,7 @@ struct nlm_block { /* * Global variables */ -extern struct rpc_program nlm_program; +extern const struct rpc_program nlm_program; extern struct svc_procedure nlmsvc_procedures[]; #ifdef CONFIG_LOCKD_V4 extern struct svc_procedure nlmsvc_procedures4[]; @@ -222,7 +223,8 @@ struct nlm_host *nlmclnt_lookup_host(const struct sockaddr *sap, const unsigned short protocol, const u32 version, const char *hostname, - int noresvport); + int noresvport, + struct net *net); void nlmclnt_release_host(struct nlm_host *); struct nlm_host *nlmsvc_lookup_host(const struct svc_rqst *rqstp, const char *hostname, @@ -232,6 +234,7 @@ struct rpc_clnt * nlm_bind_host(struct nlm_host *); void nlm_rebind_host(struct nlm_host *); struct nlm_host * nlm_get_host(struct nlm_host *); void nlm_shutdown_hosts(void); +void nlm_shutdown_hosts_net(struct net *net); void nlm_host_rebooted(const struct nlm_reboot *); /* diff --git a/include/linux/lockd/xdr4.h b/include/linux/lockd/xdr4.h index 7353821341ed..e58c88b52ce1 100644 --- a/include/linux/lockd/xdr4.h +++ b/include/linux/lockd/xdr4.h @@ -42,6 +42,6 @@ int nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *); int nlmclt_encode_cancargs(struct rpc_rqst *, u32 *, struct nlm_args *); int nlmclt_encode_unlockargs(struct rpc_rqst *, u32 *, struct nlm_args *); */ -extern struct rpc_version nlm_version4; +extern const struct rpc_version nlm_version4; #endif /* LOCKD_XDR4_H */ diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h new file mode 100644 index 000000000000..781a490a451b --- /dev/null +++ b/include/linux/lp855x.h @@ -0,0 +1,131 @@ +/* + * LP855x Backlight Driver + * + * Copyright (C) 2011 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP855X_H +#define _LP855X_H + +#define BL_CTL_SHFT (0) +#define BRT_MODE_SHFT (1) +#define BRT_MODE_MASK (0x06) + +/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */ +#define ENABLE_BL (1) +#define DISABLE_BL (0) + +#define I2C_CONFIG(id) id ## _I2C_CONFIG +#define PWM_CONFIG(id) id ## _PWM_CONFIG + +/* DEVICE CONTROL register - LP8550 */ +#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT) +#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8550_I2C_ONLY << BRT_MODE_SHFT)) + +/* DEVICE CONTROL register - LP8551 */ +#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8552 */ +#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8553 */ +#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8556 */ +#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) +#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) +#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8556_I2C_ONLY << BRT_MODE_SHFT)) +#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) + +/* ROM area boundary */ +#define EEPROM_START (0xA0) +#define EEPROM_END (0xA7) +#define EPROM_START (0xA0) +#define EPROM_END (0xAF) + +enum lp855x_chip_id { + LP8550, + LP8551, + LP8552, + LP8553, + LP8556, +}; + +enum lp855x_brightness_ctrl_mode { + PWM_BASED = 1, + REGISTER_BASED, +}; + +enum lp8550_brighntess_source { + LP8550_PWM_ONLY, + LP8550_I2C_ONLY = 2, +}; + +enum lp8551_brighntess_source { + LP8551_PWM_ONLY = LP8550_PWM_ONLY, + LP8551_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8552_brighntess_source { + LP8552_PWM_ONLY = LP8550_PWM_ONLY, + LP8552_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8553_brighntess_source { + LP8553_PWM_ONLY = LP8550_PWM_ONLY, + LP8553_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8556_brightness_source { + LP8556_PWM_ONLY, + LP8556_COMBINED1, /* pwm + i2c before the shaper block */ + LP8556_I2C_ONLY, + LP8556_COMBINED2, /* pwm + i2c after the shaper block */ +}; + +struct lp855x_pwm_data { + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (int max_brightness); +}; + +struct lp855x_rom_data { + u8 addr; + u8 val; +}; + +/** + * struct lp855x_platform_data + * @name : Backlight driver name. If it is not defined, default name is set. + * @mode : brightness control by pwm or lp855x register + * @device_control : value of DEVICE CONTROL register + * @initial_brightness : initial value of backlight brightness + * @pwm_data : platform specific pwm generation functions. + Only valid when mode is PWM_BASED. + * @load_new_rom_data : + 0 : use default configuration data + 1 : update values of eeprom or eprom registers on loading driver + * @size_program : total size of lp855x_rom_data + * @rom_data : list of new eeprom/eprom registers + */ +struct lp855x_platform_data { + char *name; + enum lp855x_brightness_ctrl_mode mode; + u8 device_control; + int initial_brightness; + struct lp855x_pwm_data pwm_data; + u8 load_new_rom_data; + int size_program; + struct lp855x_rom_data *rom_data; +}; + +#endif diff --git a/include/linux/lp8727.h b/include/linux/lp8727.h index d21fa2865bf4..ea98c6133d32 100644 --- a/include/linux/lp8727.h +++ b/include/linux/lp8727.h @@ -1,4 +1,7 @@ /* + * LP8727 Micro/Mini USB IC with integrated charger + * + * Copyright (C) 2011 Texas Instruments * Copyright (C) 2011 National Semiconductor * * This program is free software; you can redistribute it and/or modify @@ -32,13 +35,24 @@ enum lp8727_ichg { ICHG_1000mA, }; +/** + * struct lp8727_chg_param + * @eoc_level : end of charge level setting + * @ichg : charging current + */ struct lp8727_chg_param { - /* end of charge level setting */ enum lp8727_eoc_level eoc_level; - /* charging current */ enum lp8727_ichg ichg; }; +/** + * struct lp8727_platform_data + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) + * @get_batt_capacity : get battery capacity (%) + * @get_batt_temp : get battery temperature + * @ac, @usb : charging parameters each charger type + */ struct lp8727_platform_data { u8 (*get_batt_present)(void); u16 (*get_batt_level)(void); diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h index 88e78dedc2e8..eab507f2b1cb 100644 --- a/include/linux/lsm_audit.h +++ b/include/linux/lsm_audit.h @@ -21,7 +21,6 @@ #include <linux/path.h> #include <linux/key.h> #include <linux/skbuff.h> -#include <asm/system.h> /* Auxiliary data to use in generating the audit record. */ diff --git a/include/linux/magic.h b/include/linux/magic.h index 2d4beab0d5b7..e15192cb9cf4 100644 --- a/include/linux/magic.h +++ b/include/linux/magic.h @@ -9,7 +9,6 @@ #define CRAMFS_MAGIC 0x28cd3d45 /* some random number */ #define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */ #define DEBUGFS_MAGIC 0x64626720 -#define SYSFS_MAGIC 0x62656572 #define SECURITYFS_MAGIC 0x73636673 #define SELINUX_MAGIC 0xf97cff8c #define RAMFS_MAGIC 0x858458f6 /* some random number */ @@ -27,7 +26,6 @@ #define HPFS_SUPER_MAGIC 0xf995e849 #define ISOFS_SUPER_MAGIC 0x9660 #define JFFS2_SUPER_MAGIC 0x72b6 -#define ANON_INODE_FS_MAGIC 0x09041934 #define PSTOREFS_MAGIC 0x6165676C #define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ @@ -40,8 +38,8 @@ #define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */ #define NFS_SUPER_MAGIC 0x6969 #define OPENPROM_SUPER_MAGIC 0x9fa1 -#define PROC_SUPER_MAGIC 0x9fa0 #define QNX4_SUPER_MAGIC 0x002f /* qnx4 fs detection */ +#define QNX6_SUPER_MAGIC 0x68191122 /* qnx6 fs detection */ #define REISERFS_SUPER_MAGIC 0x52654973 /* used by gcc */ /* used by file system utilities that @@ -51,15 +49,24 @@ #define REISER2FS_JR_SUPER_MAGIC_STRING "ReIsEr3Fs" #define SMB_SUPER_MAGIC 0x517B -#define USBDEVICE_SUPER_MAGIC 0x9fa2 #define CGROUP_SUPER_MAGIC 0x27e0eb -#define FUTEXFS_SUPER_MAGIC 0xBAD1DEA #define STACK_END_MAGIC 0x57AC6E9D +#define V9FS_MAGIC 0x01021997 + +#define BDEVFS_MAGIC 0x62646576 +#define BINFMTFS_MAGIC 0x42494e4d #define DEVPTS_SUPER_MAGIC 0x1cd1 +#define FUTEXFS_SUPER_MAGIC 0xBAD1DEA +#define PIPEFS_MAGIC 0x50495045 +#define PROC_SUPER_MAGIC 0x9fa0 #define SOCKFS_MAGIC 0x534F434B -#define V9FS_MAGIC 0x01021997 +#define SYSFS_MAGIC 0x62656572 +#define USBDEVICE_SUPER_MAGIC 0x9fa2 +#define MTD_INODE_FS_MAGIC 0x11307854 +#define ANON_INODE_FS_MAGIC 0x09041934 + #endif /* __LINUX_MAGIC_H__ */ diff --git a/include/linux/maple.h b/include/linux/maple.h index d9a51b9b3300..c37288b23e0c 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -1,9 +1,9 @@ #ifndef __LINUX_MAPLE_H #define __LINUX_MAPLE_H -#include <linux/device.h> #include <mach/maple.h> +struct device; extern struct bus_type maple_bus_type; /* Maple Bus command and response codes */ diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index b80de520670b..f94efd2f6c27 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -77,7 +77,8 @@ extern void mem_cgroup_uncharge_end(void); extern void mem_cgroup_uncharge_page(struct page *page); extern void mem_cgroup_uncharge_cache_page(struct page *page); -extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask); +extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask, + int order); int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *memcg); extern struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page); @@ -140,6 +141,34 @@ static inline bool mem_cgroup_disabled(void) return false; } +void __mem_cgroup_begin_update_page_stat(struct page *page, bool *locked, + unsigned long *flags); + +extern atomic_t memcg_moving; + +static inline void mem_cgroup_begin_update_page_stat(struct page *page, + bool *locked, unsigned long *flags) +{ + if (mem_cgroup_disabled()) + return; + rcu_read_lock(); + *locked = false; + if (atomic_read(&memcg_moving)) + __mem_cgroup_begin_update_page_stat(page, locked, flags); +} + +void __mem_cgroup_end_update_page_stat(struct page *page, + unsigned long *flags); +static inline void mem_cgroup_end_update_page_stat(struct page *page, + bool *locked, unsigned long *flags) +{ + if (mem_cgroup_disabled()) + return; + if (*locked) + __mem_cgroup_end_update_page_stat(page, flags); + rcu_read_unlock(); +} + void mem_cgroup_update_page_stat(struct page *page, enum mem_cgroup_page_stat_item idx, int val); @@ -298,21 +327,6 @@ static inline void mem_cgroup_iter_break(struct mem_cgroup *root, { } -static inline int mem_cgroup_get_reclaim_priority(struct mem_cgroup *memcg) -{ - return 0; -} - -static inline void mem_cgroup_note_reclaim_priority(struct mem_cgroup *memcg, - int priority) -{ -} - -static inline void mem_cgroup_record_reclaim_priority(struct mem_cgroup *memcg, - int priority) -{ -} - static inline bool mem_cgroup_disabled(void) { return true; @@ -355,6 +369,16 @@ mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p) { } +static inline void mem_cgroup_begin_update_page_stat(struct page *page, + bool *locked, unsigned long *flags) +{ +} + +static inline void mem_cgroup_end_update_page_stat(struct page *page, + bool *locked, unsigned long *flags) +{ +} + static inline void mem_cgroup_inc_page_stat(struct page *page, enum mem_cgroup_page_stat_item idx) { @@ -391,7 +415,7 @@ static inline void mem_cgroup_replace_page_cache(struct page *oldpage, struct page *newpage) { } -#endif /* CONFIG_CGROUP_MEM_CONT */ +#endif /* CONFIG_CGROUP_MEM_RES_CTLR */ #if !defined(CONFIG_CGROUP_MEM_RES_CTLR) || !defined(CONFIG_DEBUG_VM) static inline bool diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 0b8e2a742600..910550f3b70e 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -4,6 +4,7 @@ #include <linux/mmzone.h> #include <linux/spinlock.h> #include <linux/notifier.h> +#include <linux/bug.h> struct page; struct zone; diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 92be3476c9f5..84d071ade1d8 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -263,6 +263,22 @@ enum { #define PM8607_PD_PREBIAS_MASK (0x1F << 0) #define PM8607_PD_PRECHG_MASK (7 << 5) +#define PM8606_REF_GP_OSC_OFF 0 +#define PM8606_REF_GP_OSC_ON 1 +#define PM8606_REF_GP_OSC_UNKNOWN 2 + +/* Clients of reference group and 8MHz oscillator in 88PM8606 */ +enum pm8606_ref_gp_and_osc_clients { + REF_GP_NO_CLIENTS = 0, + WLED1_DUTY = (1<<0), /*PF 0x02.7:0*/ + WLED2_DUTY = (1<<1), /*PF 0x04.7:0*/ + WLED3_DUTY = (1<<2), /*PF 0x06.7:0*/ + RGB1_ENABLE = (1<<3), /*PF 0x07.1*/ + RGB2_ENABLE = (1<<4), /*PF 0x07.2*/ + LDO_VBR_EN = (1<<5), /*PF 0x12.0*/ + REF_GP_MAX_CLIENT = 0xFFFF +}; + /* Interrupt Number in 88PM8607 */ enum { PM8607_IRQ_ONKEY, @@ -298,6 +314,7 @@ enum { struct pm860x_chip { struct device *dev; struct mutex irq_lock; + struct mutex osc_lock; struct i2c_client *client; struct i2c_client *companion; /* companion chip client */ struct regmap *regmap; @@ -305,12 +322,15 @@ struct pm860x_chip { int buck3_double; /* DVC ramp slope double */ unsigned short companion_addr; + unsigned short osc_vote; int id; int irq_mode; int irq_base; int core_irq; unsigned char chip_version; + unsigned char osc_status; + unsigned int wakeup_flag; }; enum { @@ -369,6 +389,9 @@ struct pm860x_platform_data { int num_regulators; }; +extern int pm8606_osc_enable(struct pm860x_chip *, unsigned short); +extern int pm8606_osc_disable(struct pm860x_chip *, unsigned short); + extern int pm860x_reg_read(struct i2c_client *, int); extern int pm860x_reg_write(struct i2c_client *, int, unsigned char); extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *); diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 9970337ff041..ee96cd51d8b2 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -14,9 +14,10 @@ * Author: Rickard Andersson <rickard.andersson@stericsson.com> */ -#include <linux/device.h> #include <linux/regulator/machine.h> +struct device; + #ifndef MFD_ABX500_H #define MFD_ABX500_H @@ -33,13 +34,6 @@ #define AB5500_1_1 0x21 #define AB5500_2_0 0x24 -/* AB8500 CIDs*/ -#define AB8500_CUT1P0 0x10 -#define AB8500_CUT1P1 0x11 -#define AB8500_CUT2P0 0x20 -#define AB8500_CUT3P0 0x30 -#define AB8500_CUT3P3 0x33 - /* * AB3100, EVENTA1, A2 and A3 event register flags * these are catenated into a single 32-bit flag in the code @@ -152,6 +146,279 @@ struct abx500_init_settings { u8 setting; }; +/* Battery driver related data */ +/* + * ADC for the battery thermistor. + * When using the ABx500_ADC_THERM_BATCTRL the battery ID resistor is combined + * with a NTC resistor to both identify the battery and to measure its + * temperature. Different phone manufactures uses different techniques to both + * identify the battery and to read its temperature. + */ +enum abx500_adc_therm { + ABx500_ADC_THERM_BATCTRL, + ABx500_ADC_THERM_BATTEMP, +}; + +/** + * struct abx500_res_to_temp - defines one point in a temp to res curve. To + * be used in battery packs that combines the identification resistor with a + * NTC resistor. + * @temp: battery pack temperature in Celcius + * @resist: NTC resistor net total resistance + */ +struct abx500_res_to_temp { + int temp; + int resist; +}; + +/** + * struct abx500_v_to_cap - Table for translating voltage to capacity + * @voltage: Voltage in mV + * @capacity: Capacity in percent + */ +struct abx500_v_to_cap { + int voltage; + int capacity; +}; + +/* Forward declaration */ +struct abx500_fg; + +/** + * struct abx500_fg_parameters - Fuel gauge algorithm parameters, in seconds + * if not specified + * @recovery_sleep_timer: Time between measurements while recovering + * @recovery_total_time: Total recovery time + * @init_timer: Measurement interval during startup + * @init_discard_time: Time we discard voltage measurement at startup + * @init_total_time: Total init time during startup + * @high_curr_time: Time current has to be high to go to recovery + * @accu_charging: FG accumulation time while charging + * @accu_high_curr: FG accumulation time in high current mode + * @high_curr_threshold: High current threshold, in mA + * @lowbat_threshold: Low battery threshold, in mV + * @overbat_threshold: Over battery threshold, in mV + * @battok_falling_th_sel0 Threshold in mV for battOk signal sel0 + * Resolution in 50 mV step. + * @battok_raising_th_sel1 Threshold in mV for battOk signal sel1 + * Resolution in 50 mV step. + * @user_cap_limit Capacity reported from user must be within this + * limit to be considered as sane, in percentage + * points. + * @maint_thres This is the threshold where we stop reporting + * battery full while in maintenance, in per cent + */ +struct abx500_fg_parameters { + int recovery_sleep_timer; + int recovery_total_time; + int init_timer; + int init_discard_time; + int init_total_time; + int high_curr_time; + int accu_charging; + int accu_high_curr; + int high_curr_threshold; + int lowbat_threshold; + int overbat_threshold; + int battok_falling_th_sel0; + int battok_raising_th_sel1; + int user_cap_limit; + int maint_thres; +}; + +/** + * struct abx500_charger_maximization - struct used by the board config. + * @use_maxi: Enable maximization for this battery type + * @maxi_chg_curr: Maximum charger current allowed + * @maxi_wait_cycles: cycles to wait before setting charger current + * @charger_curr_step delta between two charger current settings (mA) + */ +struct abx500_maxim_parameters { + bool ena_maxi; + int chg_curr; + int wait_cycles; + int charger_curr_step; +}; + +/** + * struct abx500_battery_type - different batteries supported + * @name: battery technology + * @resis_high: battery upper resistance limit + * @resis_low: battery lower resistance limit + * @charge_full_design: Maximum battery capacity in mAh + * @nominal_voltage: Nominal voltage of the battery in mV + * @termination_vol: max voltage upto which battery can be charged + * @termination_curr battery charging termination current in mA + * @recharge_vol battery voltage limit that will trigger a new + * full charging cycle in the case where maintenan- + * -ce charging has been disabled + * @normal_cur_lvl: charger current in normal state in mA + * @normal_vol_lvl: charger voltage in normal state in mV + * @maint_a_cur_lvl: charger current in maintenance A state in mA + * @maint_a_vol_lvl: charger voltage in maintenance A state in mV + * @maint_a_chg_timer_h: charge time in maintenance A state + * @maint_b_cur_lvl: charger current in maintenance B state in mA + * @maint_b_vol_lvl: charger voltage in maintenance B state in mV + * @maint_b_chg_timer_h: charge time in maintenance B state + * @low_high_cur_lvl: charger current in temp low/high state in mA + * @low_high_vol_lvl: charger voltage in temp low/high state in mV' + * @battery_resistance: battery inner resistance in mOhm. + * @n_r_t_tbl_elements: number of elements in r_to_t_tbl + * @r_to_t_tbl: table containing resistance to temp points + * @n_v_cap_tbl_elements: number of elements in v_to_cap_tbl + * @v_to_cap_tbl: Voltage to capacity (in %) table + * @n_batres_tbl_elements number of elements in the batres_tbl + * @batres_tbl battery internal resistance vs temperature table + */ +struct abx500_battery_type { + int name; + int resis_high; + int resis_low; + int charge_full_design; + int nominal_voltage; + int termination_vol; + int termination_curr; + int recharge_vol; + int normal_cur_lvl; + int normal_vol_lvl; + int maint_a_cur_lvl; + int maint_a_vol_lvl; + int maint_a_chg_timer_h; + int maint_b_cur_lvl; + int maint_b_vol_lvl; + int maint_b_chg_timer_h; + int low_high_cur_lvl; + int low_high_vol_lvl; + int battery_resistance; + int n_temp_tbl_elements; + struct abx500_res_to_temp *r_to_t_tbl; + int n_v_cap_tbl_elements; + struct abx500_v_to_cap *v_to_cap_tbl; + int n_batres_tbl_elements; + struct batres_vs_temp *batres_tbl; +}; + +/** + * struct abx500_bm_capacity_levels - abx500 capacity level data + * @critical: critical capacity level in percent + * @low: low capacity level in percent + * @normal: normal capacity level in percent + * @high: high capacity level in percent + * @full: full capacity level in percent + */ +struct abx500_bm_capacity_levels { + int critical; + int low; + int normal; + int high; + int full; +}; + +/** + * struct abx500_bm_charger_parameters - Charger specific parameters + * @usb_volt_max: maximum allowed USB charger voltage in mV + * @usb_curr_max: maximum allowed USB charger current in mA + * @ac_volt_max: maximum allowed AC charger voltage in mV + * @ac_curr_max: maximum allowed AC charger current in mA + */ +struct abx500_bm_charger_parameters { + int usb_volt_max; + int usb_curr_max; + int ac_volt_max; + int ac_curr_max; +}; + +/** + * struct abx500_bm_data - abx500 battery management data + * @temp_under under this temp, charging is stopped + * @temp_low between this temp and temp_under charging is reduced + * @temp_high between this temp and temp_over charging is reduced + * @temp_over over this temp, charging is stopped + * @temp_now present battery temperature + * @temp_interval_chg temperature measurement interval in s when charging + * @temp_interval_nochg temperature measurement interval in s when not charging + * @main_safety_tmr_h safety timer for main charger + * @usb_safety_tmr_h safety timer for usb charger + * @bkup_bat_v voltage which we charge the backup battery with + * @bkup_bat_i current which we charge the backup battery with + * @no_maintenance indicates that maintenance charging is disabled + * @abx500_adc_therm placement of thermistor, batctrl or battemp adc + * @chg_unknown_bat flag to enable charging of unknown batteries + * @enable_overshoot flag to enable VBAT overshoot control + * @auto_trig flag to enable auto adc trigger + * @fg_res resistance of FG resistor in 0.1mOhm + * @n_btypes number of elements in array bat_type + * @batt_id index of the identified battery in array bat_type + * @interval_charging charge alg cycle period time when charging (sec) + * @interval_not_charging charge alg cycle period time when not charging (sec) + * @temp_hysteresis temperature hysteresis + * @gnd_lift_resistance Battery ground to phone ground resistance (mOhm) + * @maxi: maximization parameters + * @cap_levels capacity in percent for the different capacity levels + * @bat_type table of supported battery types + * @chg_params charger parameters + * @fg_params fuel gauge parameters + */ +struct abx500_bm_data { + int temp_under; + int temp_low; + int temp_high; + int temp_over; + int temp_now; + int temp_interval_chg; + int temp_interval_nochg; + int main_safety_tmr_h; + int usb_safety_tmr_h; + int bkup_bat_v; + int bkup_bat_i; + bool no_maintenance; + bool chg_unknown_bat; + bool enable_overshoot; + bool auto_trig; + enum abx500_adc_therm adc_therm; + int fg_res; + int n_btypes; + int batt_id; + int interval_charging; + int interval_not_charging; + int temp_hysteresis; + int gnd_lift_resistance; + const struct abx500_maxim_parameters *maxi; + const struct abx500_bm_capacity_levels *cap_levels; + const struct abx500_battery_type *bat_type; + const struct abx500_bm_charger_parameters *chg_params; + const struct abx500_fg_parameters *fg_params; +}; + +struct abx500_chargalg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct abx500_charger_platform_data { + char **supplied_to; + size_t num_supplicants; + bool autopower_cfg; +}; + +struct abx500_btemp_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct abx500_fg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct abx500_bm_plat_data { + struct abx500_bm_data *battery; + struct abx500_charger_platform_data *charger; + struct abx500_btemp_platform_data *btemp; + struct abx500_fg_platform_data *fg; + struct abx500_chargalg_platform_data *chargalg; +}; + int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, u8 value); int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg, diff --git a/include/linux/mfd/abx500/ab5500.h b/include/linux/mfd/abx500/ab5500.h index a720051ae933..54f820ed73bb 100644 --- a/include/linux/mfd/abx500/ab5500.h +++ b/include/linux/mfd/abx500/ab5500.h @@ -6,7 +6,7 @@ #ifndef MFD_AB5500_H #define MFD_AB5500_H -#include <linux/device.h> +struct device; enum ab5500_devid { AB5500_DEVID_ADC, diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h new file mode 100644 index 000000000000..44310c98ee6e --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -0,0 +1,474 @@ +/* + * Copyright ST-Ericsson 2012. + * + * Author: Arun Murthy <arun.murthy@stericsson.com> + * Licensed under GPLv2. + */ + +#ifndef _AB8500_BM_H +#define _AB8500_BM_H + +#include <linux/kernel.h> +#include <linux/mfd/abx500.h> + +/* + * System control 2 register offsets. + * bank = 0x02 + */ +#define AB8500_MAIN_WDOG_CTRL_REG 0x01 +#define AB8500_LOW_BAT_REG 0x03 +#define AB8500_BATT_OK_REG 0x04 +/* + * USB/ULPI register offsets + * Bank : 0x5 + */ +#define AB8500_USB_LINE_STAT_REG 0x80 + +/* + * Charger / status register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_STATUS1_REG 0x00 +#define AB8500_CH_STATUS2_REG 0x01 +#define AB8500_CH_USBCH_STAT1_REG 0x02 +#define AB8500_CH_USBCH_STAT2_REG 0x03 +#define AB8500_CH_FSM_STAT_REG 0x04 +#define AB8500_CH_STAT_REG 0x05 + +/* + * Charger / control register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_VOLT_LVL_REG 0x40 +#define AB8500_CH_VOLT_LVL_MAX_REG 0x41 /*Only in Cut2.0*/ +#define AB8500_CH_OPT_CRNTLVL_REG 0x42 +#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x43 /*Only in Cut2.0*/ +#define AB8500_CH_WD_TIMER_REG 0x50 +#define AB8500_CHARG_WD_CTRL 0x51 +#define AB8500_BTEMP_HIGH_TH 0x52 +#define AB8500_LED_INDICATOR_PWM_CTRL 0x53 +#define AB8500_LED_INDICATOR_PWM_DUTY 0x54 +#define AB8500_BATT_OVV 0x55 +#define AB8500_CHARGER_CTRL 0x56 +#define AB8500_BAT_CTRL_CURRENT_SOURCE 0x60 /*Only in Cut2.0*/ + +/* + * Charger / main control register offsets + * Bank : 0x0B + */ +#define AB8500_MCH_CTRL1 0x80 +#define AB8500_MCH_CTRL2 0x81 +#define AB8500_MCH_IPT_CURLVL_REG 0x82 +#define AB8500_CH_WD_REG 0x83 + +/* + * Charger / USB control register offsets + * Bank : 0x0B + */ +#define AB8500_USBCH_CTRL1_REG 0xC0 +#define AB8500_USBCH_CTRL2_REG 0xC1 +#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2 + +/* + * Gas Gauge register offsets + * Bank : 0x0C + */ +#define AB8500_GASG_CC_CTRL_REG 0x00 +#define AB8500_GASG_CC_ACCU1_REG 0x01 +#define AB8500_GASG_CC_ACCU2_REG 0x02 +#define AB8500_GASG_CC_ACCU3_REG 0x03 +#define AB8500_GASG_CC_ACCU4_REG 0x04 +#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x05 +#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x06 +#define AB8500_GASG_CC_SMPL_CNVL_REG 0x07 +#define AB8500_GASG_CC_SMPL_CNVH_REG 0x08 +#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x09 +#define AB8500_GASG_CC_OFFSET_REG 0x0A +#define AB8500_GASG_CC_NCOV_ACCU 0x10 +#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x11 +#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x12 +#define AB8500_GASG_CC_NCOV_ACCU_MED 0x13 +#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x14 + +/* + * Interrupt register offsets + * Bank : 0x0E + */ +#define AB8500_IT_SOURCE2_REG 0x01 +#define AB8500_IT_SOURCE21_REG 0x14 + +/* + * RTC register offsets + * Bank: 0x0F + */ +#define AB8500_RTC_BACKUP_CHG_REG 0x0C +#define AB8500_RTC_CC_CONF_REG 0x01 +#define AB8500_RTC_CTRL_REG 0x0B + +/* + * OTP register offsets + * Bank : 0x15 + */ +#define AB8500_OTP_CONF_15 0x0E + +/* GPADC constants from AB8500 spec, UM0836 */ +#define ADC_RESOLUTION 1024 +#define ADC_CH_MAIN_MIN 0 +#define ADC_CH_MAIN_MAX 20030 +#define ADC_CH_VBUS_MIN 0 +#define ADC_CH_VBUS_MAX 20030 +#define ADC_CH_VBAT_MIN 2300 +#define ADC_CH_VBAT_MAX 4800 +#define ADC_CH_BKBAT_MIN 0 +#define ADC_CH_BKBAT_MAX 3200 + +/* Main charge i/p current */ +#define MAIN_CH_IP_CUR_0P9A 0x80 +#define MAIN_CH_IP_CUR_1P0A 0x90 +#define MAIN_CH_IP_CUR_1P1A 0xA0 +#define MAIN_CH_IP_CUR_1P2A 0xB0 +#define MAIN_CH_IP_CUR_1P3A 0xC0 +#define MAIN_CH_IP_CUR_1P4A 0xD0 +#define MAIN_CH_IP_CUR_1P5A 0xE0 + +/* ChVoltLevel */ +#define CH_VOL_LVL_3P5 0x00 +#define CH_VOL_LVL_4P0 0x14 +#define CH_VOL_LVL_4P05 0x16 +#define CH_VOL_LVL_4P1 0x1B +#define CH_VOL_LVL_4P15 0x20 +#define CH_VOL_LVL_4P2 0x25 +#define CH_VOL_LVL_4P6 0x4D + +/* ChOutputCurrentLevel */ +#define CH_OP_CUR_LVL_0P1 0x00 +#define CH_OP_CUR_LVL_0P2 0x01 +#define CH_OP_CUR_LVL_0P3 0x02 +#define CH_OP_CUR_LVL_0P4 0x03 +#define CH_OP_CUR_LVL_0P5 0x04 +#define CH_OP_CUR_LVL_0P6 0x05 +#define CH_OP_CUR_LVL_0P7 0x06 +#define CH_OP_CUR_LVL_0P8 0x07 +#define CH_OP_CUR_LVL_0P9 0x08 +#define CH_OP_CUR_LVL_1P4 0x0D +#define CH_OP_CUR_LVL_1P5 0x0E +#define CH_OP_CUR_LVL_1P6 0x0F + +/* BTEMP High thermal limits */ +#define BTEMP_HIGH_TH_57_0 0x00 +#define BTEMP_HIGH_TH_52 0x01 +#define BTEMP_HIGH_TH_57_1 0x02 +#define BTEMP_HIGH_TH_62 0x03 + +/* current is mA */ +#define USB_0P1A 100 +#define USB_0P2A 200 +#define USB_0P3A 300 +#define USB_0P4A 400 +#define USB_0P5A 500 + +#define LOW_BAT_3P1V 0x20 +#define LOW_BAT_2P3V 0x00 +#define LOW_BAT_RESET 0x01 +#define LOW_BAT_ENABLE 0x01 + +/* Backup battery constants */ +#define BUP_ICH_SEL_50UA 0x00 +#define BUP_ICH_SEL_150UA 0x04 +#define BUP_ICH_SEL_300UA 0x08 +#define BUP_ICH_SEL_700UA 0x0C + +#define BUP_VCH_SEL_2P5V 0x00 +#define BUP_VCH_SEL_2P6V 0x01 +#define BUP_VCH_SEL_2P8V 0x02 +#define BUP_VCH_SEL_3P1V 0x03 + +/* Battery OVV constants */ +#define BATT_OVV_ENA 0x02 +#define BATT_OVV_TH_3P7 0x00 +#define BATT_OVV_TH_4P75 0x01 + +/* A value to indicate over voltage */ +#define BATT_OVV_VALUE 4750 + +/* VBUS OVV constants */ +#define VBUS_OVV_SELECT_MASK 0x78 +#define VBUS_OVV_SELECT_5P6V 0x00 +#define VBUS_OVV_SELECT_5P7V 0x08 +#define VBUS_OVV_SELECT_5P8V 0x10 +#define VBUS_OVV_SELECT_5P9V 0x18 +#define VBUS_OVV_SELECT_6P0V 0x20 +#define VBUS_OVV_SELECT_6P1V 0x28 +#define VBUS_OVV_SELECT_6P2V 0x30 +#define VBUS_OVV_SELECT_6P3V 0x38 + +#define VBUS_AUTO_IN_CURR_LIM_ENA 0x04 + +/* Fuel Gauge constants */ +#define RESET_ACCU 0x02 +#define READ_REQ 0x01 +#define CC_DEEP_SLEEP_ENA 0x02 +#define CC_PWR_UP_ENA 0x01 +#define CC_SAMPLES_40 0x28 +#define RD_NCONV_ACCU_REQ 0x01 +#define CC_CALIB 0x08 +#define CC_INTAVGOFFSET_ENA 0x10 +#define CC_MUXOFFSET 0x80 +#define CC_INT_CAL_N_AVG_MASK 0x60 +#define CC_INT_CAL_SAMPLES_16 0x40 +#define CC_INT_CAL_SAMPLES_8 0x20 +#define CC_INT_CAL_SAMPLES_4 0x00 + +/* RTC constants */ +#define RTC_BUP_CH_ENA 0x10 + +/* BatCtrl Current Source Constants */ +#define BAT_CTRL_7U_ENA 0x01 +#define BAT_CTRL_20U_ENA 0x02 +#define BAT_CTRL_CMP_ENA 0x04 +#define FORCE_BAT_CTRL_CMP_HIGH 0x08 +#define BAT_CTRL_PULL_UP_ENA 0x10 + +/* Battery type */ +#define BATTERY_UNKNOWN 00 + +/** + * struct res_to_temp - defines one point in a temp to res curve. To + * be used in battery packs that combines the identification resistor with a + * NTC resistor. + * @temp: battery pack temperature in Celcius + * @resist: NTC resistor net total resistance + */ +struct res_to_temp { + int temp; + int resist; +}; + +/** + * struct batres_vs_temp - defines one point in a temp vs battery internal + * resistance curve. + * @temp: battery pack temperature in Celcius + * @resist: battery internal reistance in mOhm + */ +struct batres_vs_temp { + int temp; + int resist; +}; + +/* Forward declaration */ +struct ab8500_fg; + +/** + * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds + * if not specified + * @recovery_sleep_timer: Time between measurements while recovering + * @recovery_total_time: Total recovery time + * @init_timer: Measurement interval during startup + * @init_discard_time: Time we discard voltage measurement at startup + * @init_total_time: Total init time during startup + * @high_curr_time: Time current has to be high to go to recovery + * @accu_charging: FG accumulation time while charging + * @accu_high_curr: FG accumulation time in high current mode + * @high_curr_threshold: High current threshold, in mA + * @lowbat_threshold: Low battery threshold, in mV + * @battok_falling_th_sel0 Threshold in mV for battOk signal sel0 + * Resolution in 50 mV step. + * @battok_raising_th_sel1 Threshold in mV for battOk signal sel1 + * Resolution in 50 mV step. + * @user_cap_limit Capacity reported from user must be within this + * limit to be considered as sane, in percentage + * points. + * @maint_thres This is the threshold where we stop reporting + * battery full while in maintenance, in per cent + */ +struct ab8500_fg_parameters { + int recovery_sleep_timer; + int recovery_total_time; + int init_timer; + int init_discard_time; + int init_total_time; + int high_curr_time; + int accu_charging; + int accu_high_curr; + int high_curr_threshold; + int lowbat_threshold; + int battok_falling_th_sel0; + int battok_raising_th_sel1; + int user_cap_limit; + int maint_thres; +}; + +/** + * struct ab8500_charger_maximization - struct used by the board config. + * @use_maxi: Enable maximization for this battery type + * @maxi_chg_curr: Maximum charger current allowed + * @maxi_wait_cycles: cycles to wait before setting charger current + * @charger_curr_step delta between two charger current settings (mA) + */ +struct ab8500_maxim_parameters { + bool ena_maxi; + int chg_curr; + int wait_cycles; + int charger_curr_step; +}; + +/** + * struct ab8500_bm_capacity_levels - ab8500 capacity level data + * @critical: critical capacity level in percent + * @low: low capacity level in percent + * @normal: normal capacity level in percent + * @high: high capacity level in percent + * @full: full capacity level in percent + */ +struct ab8500_bm_capacity_levels { + int critical; + int low; + int normal; + int high; + int full; +}; + +/** + * struct ab8500_bm_charger_parameters - Charger specific parameters + * @usb_volt_max: maximum allowed USB charger voltage in mV + * @usb_curr_max: maximum allowed USB charger current in mA + * @ac_volt_max: maximum allowed AC charger voltage in mV + * @ac_curr_max: maximum allowed AC charger current in mA + */ +struct ab8500_bm_charger_parameters { + int usb_volt_max; + int usb_curr_max; + int ac_volt_max; + int ac_curr_max; +}; + +/** + * struct ab8500_bm_data - ab8500 battery management data + * @temp_under under this temp, charging is stopped + * @temp_low between this temp and temp_under charging is reduced + * @temp_high between this temp and temp_over charging is reduced + * @temp_over over this temp, charging is stopped + * @temp_interval_chg temperature measurement interval in s when charging + * @temp_interval_nochg temperature measurement interval in s when not charging + * @main_safety_tmr_h safety timer for main charger + * @usb_safety_tmr_h safety timer for usb charger + * @bkup_bat_v voltage which we charge the backup battery with + * @bkup_bat_i current which we charge the backup battery with + * @no_maintenance indicates that maintenance charging is disabled + * @adc_therm placement of thermistor, batctrl or battemp adc + * @chg_unknown_bat flag to enable charging of unknown batteries + * @enable_overshoot flag to enable VBAT overshoot control + * @fg_res resistance of FG resistor in 0.1mOhm + * @n_btypes number of elements in array bat_type + * @batt_id index of the identified battery in array bat_type + * @interval_charging charge alg cycle period time when charging (sec) + * @interval_not_charging charge alg cycle period time when not charging (sec) + * @temp_hysteresis temperature hysteresis + * @gnd_lift_resistance Battery ground to phone ground resistance (mOhm) + * @maxi: maximization parameters + * @cap_levels capacity in percent for the different capacity levels + * @bat_type table of supported battery types + * @chg_params charger parameters + * @fg_params fuel gauge parameters + */ +struct ab8500_bm_data { + int temp_under; + int temp_low; + int temp_high; + int temp_over; + int temp_interval_chg; + int temp_interval_nochg; + int main_safety_tmr_h; + int usb_safety_tmr_h; + int bkup_bat_v; + int bkup_bat_i; + bool no_maintenance; + bool chg_unknown_bat; + bool enable_overshoot; + enum abx500_adc_therm adc_therm; + int fg_res; + int n_btypes; + int batt_id; + int interval_charging; + int interval_not_charging; + int temp_hysteresis; + int gnd_lift_resistance; + const struct ab8500_maxim_parameters *maxi; + const struct ab8500_bm_capacity_levels *cap_levels; + const struct ab8500_bm_charger_parameters *chg_params; + const struct ab8500_fg_parameters *fg_params; +}; + +struct ab8500_charger_platform_data { + char **supplied_to; + size_t num_supplicants; + bool autopower_cfg; +}; + +struct ab8500_btemp_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct ab8500_fg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct ab8500_chargalg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; +struct ab8500_btemp; +struct ab8500_gpadc; +struct ab8500_fg; +#ifdef CONFIG_AB8500_BM +void ab8500_fg_reinit(void); +void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); +struct ab8500_btemp *ab8500_btemp_get(void); +int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp); +struct ab8500_fg *ab8500_fg_get(void); +int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev); +int ab8500_fg_inst_curr_start(struct ab8500_fg *di); +int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res); +int ab8500_fg_inst_curr_done(struct ab8500_fg *di); + +#else +int ab8500_fg_inst_curr_done(struct ab8500_fg *di) +{ +} +static void ab8500_fg_reinit(void) +{ +} +static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA) +{ +} +static struct ab8500_btemp *ab8500_btemp_get(void) +{ + return NULL; +} +static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp) +{ + return 0; +} +struct ab8500_fg *ab8500_fg_get(void) +{ + return NULL; +} +static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev) +{ + return -ENODEV; +} + +static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di) +{ + return -ENODEV; +} + +static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) +{ + return -ENODEV; +} + +#endif +#endif /* _AB8500_BM_H */ diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h index 488a8c920a29..2387c207ea86 100644 --- a/include/linux/mfd/abx500/ab8500-gpio.h +++ b/include/linux/mfd/abx500/ab8500-gpio.h @@ -10,12 +10,14 @@ /* * Platform data to register a block: only the initial gpio/irq number. + * Array sizes are large enough to contain all AB8500 and AB9540 GPIO + * registers. */ struct ab8500_gpio_platform_data { int gpio_base; u32 irq_base; - u8 config_reg[7]; + u8 config_reg[8]; }; #endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index 10da0291f8f8..10eb50973c39 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -71,6 +71,13 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) #define AB8500_SWATCTRL 0x230 #define AB8500_HIQCLKCTRL 0x232 #define AB8500_VSIMSYSCLKCTRL 0x233 +#define AB9540_SYSCLK12BUFCTRL 0x234 +#define AB9540_SYSCLK12CONFCTRL 0x235 +#define AB9540_SYSCLK12BUFCTRL2 0x236 +#define AB9540_SYSCLK12BUF1VALID 0x237 +#define AB9540_SYSCLK12BUF2VALID 0x238 +#define AB9540_SYSCLK12BUF3VALID 0x239 +#define AB9540_SYSCLK12BUF4VALID 0x23A /* Bits */ #define AB8500_TURNONSTATUS_PORNVBAT BIT(0) @@ -251,4 +258,40 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0 + +#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1) +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2 +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6) + +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3) + +#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0 + #endif /* __AB8500_SYSCTRL_H */ diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 838c6b487cc5..fccc3002f271 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -7,7 +7,32 @@ #ifndef MFD_AB8500_H #define MFD_AB8500_H -#include <linux/device.h> +#include <linux/mutex.h> + +struct device; + +/* + * AB IC versions + * + * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a + * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the + * print of version string. + */ +enum ab8500_version { + AB8500_VERSION_AB8500 = 0x0, + AB8500_VERSION_AB8505 = 0x1, + AB8500_VERSION_AB9540 = 0x2, + AB8500_VERSION_AB8540 = 0x3, + AB8500_VERSION_UNDEFINED, +}; + +/* AB8500 CIDs*/ +#define AB8500_CUTEARLY 0x00 +#define AB8500_CUT1P0 0x10 +#define AB8500_CUT1P1 0x11 +#define AB8500_CUT2P0 0x20 +#define AB8500_CUT3P0 0x30 +#define AB8500_CUT3P3 0x33 /* * AB8500 bank addresses @@ -35,30 +60,34 @@ /* * Interrupts + * Values used to index into array ab8500_irq_regoffset[] defined in + * drivers/mdf/ab8500-core.c */ - -#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 -#define AB8500_INT_UN_PLUG_TV_DET 1 -#define AB8500_INT_PLUG_TV_DET 2 +/* Definitions for AB8500 and AB9540 */ +/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */ +#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 /* not 8505/9540 */ +#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540 */ +#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540 */ #define AB8500_INT_TEMP_WARM 3 #define AB8500_INT_PON_KEY2DB_F 4 #define AB8500_INT_PON_KEY2DB_R 5 #define AB8500_INT_PON_KEY1DB_F 6 #define AB8500_INT_PON_KEY1DB_R 7 +/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */ #define AB8500_INT_BATT_OVV 8 -#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 -#define AB8500_INT_MAIN_CH_PLUG_DET 11 -#define AB8500_INT_USB_ID_DET_F 12 -#define AB8500_INT_USB_ID_DET_R 13 +#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505 */ +#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505 */ #define AB8500_INT_VBUS_DET_F 14 #define AB8500_INT_VBUS_DET_R 15 +/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */ #define AB8500_INT_VBUS_CH_DROP_END 16 #define AB8500_INT_RTC_60S 17 #define AB8500_INT_RTC_ALARM 18 #define AB8500_INT_BAT_CTRL_INDB 20 #define AB8500_INT_CH_WD_EXP 21 #define AB8500_INT_VBUS_OVV 22 -#define AB8500_INT_MAIN_CH_DROP_END 23 +#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540 */ +/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */ #define AB8500_INT_CCN_CONV_ACC 24 #define AB8500_INT_INT_AUD 25 #define AB8500_INT_CCEOC 26 @@ -67,7 +96,8 @@ #define AB8500_INT_LOW_BAT_R 29 #define AB8500_INT_BUP_CHG_NOT_OK 30 #define AB8500_INT_BUP_CHG_OK 31 -#define AB8500_INT_GP_HW_ADC_CONV_END 32 +/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */ +#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505 */ #define AB8500_INT_ACC_DETECT_1DB_F 33 #define AB8500_INT_ACC_DETECT_1DB_R 34 #define AB8500_INT_ACC_DETECT_22DB_F 35 @@ -75,38 +105,43 @@ #define AB8500_INT_ACC_DETECT_21DB_F 37 #define AB8500_INT_ACC_DETECT_21DB_R 38 #define AB8500_INT_GP_SW_ADC_CONV_END 39 -#define AB8500_INT_GPIO6R 40 -#define AB8500_INT_GPIO7R 41 -#define AB8500_INT_GPIO8R 42 -#define AB8500_INT_GPIO9R 43 +/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */ +#define AB8500_INT_GPIO6R 40 /* not 8505/9540 */ +#define AB8500_INT_GPIO7R 41 /* not 8505/9540 */ +#define AB8500_INT_GPIO8R 42 /* not 8505/9540 */ +#define AB8500_INT_GPIO9R 43 /* not 8505/9540 */ #define AB8500_INT_GPIO10R 44 #define AB8500_INT_GPIO11R 45 -#define AB8500_INT_GPIO12R 46 +#define AB8500_INT_GPIO12R 46 /* not 8505 */ #define AB8500_INT_GPIO13R 47 -#define AB8500_INT_GPIO24R 48 -#define AB8500_INT_GPIO25R 49 -#define AB8500_INT_GPIO36R 50 -#define AB8500_INT_GPIO37R 51 -#define AB8500_INT_GPIO38R 52 -#define AB8500_INT_GPIO39R 53 +/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */ +#define AB8500_INT_GPIO24R 48 /* not 8505 */ +#define AB8500_INT_GPIO25R 49 /* not 8505 */ +#define AB8500_INT_GPIO36R 50 /* not 8505/9540 */ +#define AB8500_INT_GPIO37R 51 /* not 8505/9540 */ +#define AB8500_INT_GPIO38R 52 /* not 8505/9540 */ +#define AB8500_INT_GPIO39R 53 /* not 8505/9540 */ #define AB8500_INT_GPIO40R 54 #define AB8500_INT_GPIO41R 55 -#define AB8500_INT_GPIO6F 56 -#define AB8500_INT_GPIO7F 57 -#define AB8500_INT_GPIO8F 58 -#define AB8500_INT_GPIO9F 59 +/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */ +#define AB8500_INT_GPIO6F 56 /* not 8505/9540 */ +#define AB8500_INT_GPIO7F 57 /* not 8505/9540 */ +#define AB8500_INT_GPIO8F 58 /* not 8505/9540 */ +#define AB8500_INT_GPIO9F 59 /* not 8505/9540 */ #define AB8500_INT_GPIO10F 60 #define AB8500_INT_GPIO11F 61 -#define AB8500_INT_GPIO12F 62 +#define AB8500_INT_GPIO12F 62 /* not 8505 */ #define AB8500_INT_GPIO13F 63 -#define AB8500_INT_GPIO24F 64 -#define AB8500_INT_GPIO25F 65 -#define AB8500_INT_GPIO36F 66 -#define AB8500_INT_GPIO37F 67 -#define AB8500_INT_GPIO38F 68 -#define AB8500_INT_GPIO39F 69 +/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */ +#define AB8500_INT_GPIO24F 64 /* not 8505 */ +#define AB8500_INT_GPIO25F 65 /* not 8505 */ +#define AB8500_INT_GPIO36F 66 /* not 8505/9540 */ +#define AB8500_INT_GPIO37F 67 /* not 8505/9540 */ +#define AB8500_INT_GPIO38F 68 /* not 8505/9540 */ +#define AB8500_INT_GPIO39F 69 /* not 8505/9540 */ #define AB8500_INT_GPIO40F 70 #define AB8500_INT_GPIO41F 71 +/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */ #define AB8500_INT_ADP_SOURCE_ERROR 72 #define AB8500_INT_ADP_SINK_ERROR 73 #define AB8500_INT_ADP_PROBE_PLUG 74 @@ -114,30 +149,67 @@ #define AB8500_INT_ADP_SENSE_OFF 76 #define AB8500_INT_USB_PHY_POWER_ERR 78 #define AB8500_INT_USB_LINK_STATUS 79 +/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */ #define AB8500_INT_BTEMP_LOW 80 #define AB8500_INT_BTEMP_LOW_MEDIUM 81 #define AB8500_INT_BTEMP_MEDIUM_HIGH 82 #define AB8500_INT_BTEMP_HIGH 83 -#define AB8500_INT_USB_CHARGER_NOT_OK 89 +/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */ +#define AB8500_INT_SRP_DETECT 88 +#define AB8500_INT_USB_CHARGER_NOT_OKR 89 #define AB8500_INT_ID_WAKEUP_R 90 #define AB8500_INT_ID_DET_R1R 92 #define AB8500_INT_ID_DET_R2R 93 #define AB8500_INT_ID_DET_R3R 94 #define AB8500_INT_ID_DET_R4R 95 +/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */ #define AB8500_INT_ID_WAKEUP_F 96 #define AB8500_INT_ID_DET_R1F 98 #define AB8500_INT_ID_DET_R2F 99 #define AB8500_INT_ID_DET_R3F 100 #define AB8500_INT_ID_DET_R4F 101 -#define AB8500_INT_USB_CHG_DET_DONE 102 +#define AB8500_INT_CHAUTORESTARTAFTSEC 102 +#define AB8500_INT_CHSTOPBYSEC 103 +/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */ #define AB8500_INT_USB_CH_TH_PROT_F 104 #define AB8500_INT_USB_CH_TH_PROT_R 105 -#define AB8500_INT_MAIN_CH_TH_PROT_F 106 -#define AB8500_INT_MAIN_CH_TH_PROT_R 107 -#define AB8500_INT_USB_CHARGER_NOT_OKF 111 +#define AB8500_INT_MAIN_CH_TH_PROT_F 106 /* not 8505/9540 */ +#define AB8500_INT_MAIN_CH_TH_PROT_R 107 /* not 8505/9540 */ +#define AB8500_INT_CHCURLIMNOHSCHIRP 109 +#define AB8500_INT_CHCURLIMHSCHIRP 110 +#define AB8500_INT_XTAL32K_KO 111 +/* Definitions for AB9540 */ +/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */ +#define AB9540_INT_GPIO50R 113 +#define AB9540_INT_GPIO51R 114 /* not 8505 */ +#define AB9540_INT_GPIO52R 115 +#define AB9540_INT_GPIO53R 116 +#define AB9540_INT_GPIO54R 117 /* not 8505 */ +#define AB9540_INT_IEXT_CH_RF_BFN_R 118 +#define AB9540_INT_IEXT_CH_RF_BFN_F 119 +/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */ +#define AB9540_INT_GPIO50F 121 +#define AB9540_INT_GPIO51F 122 /* not 8505 */ +#define AB9540_INT_GPIO52F 123 +#define AB9540_INT_GPIO53F 124 +#define AB9540_INT_GPIO54F 125 /* not 8505 */ + +/* + * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the + * entire platform. This is a "compile time" constant so this must be set to + * the largest possible value that may be encountered with different AB SOCs. + * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540 + * which is larger. + */ #define AB8500_NR_IRQS 112 +#define AB8505_NR_IRQS 128 +#define AB9540_NR_IRQS 128 +/* This is set to the roof of any AB8500 chip variant IRQ counts */ +#define AB8500_MAX_NR_IRQS AB9540_NR_IRQS + #define AB8500_NUM_IRQ_REGS 14 +#define AB9540_NUM_IRQ_REGS 17 /** * struct ab8500 - ab8500 internal structure @@ -145,13 +217,18 @@ * @lock: read/write operations lock * @irq_lock: genirq bus lock * @irq: irq line + * @version: chip version id (e.g. ab8500 or ab9540) * @chip_id: chip revision id * @write: register write + * @write_masked: masked register write * @read: register read * @rx_buf: rx buf for SPI * @tx_buf: tx buf for SPI * @mask: cache of IRQ regs for bus lock * @oldmask: cache of previous IRQ regs for bus lock + * @mask_size: Actual number of valid entries in mask[], oldmask[] and + * irq_reg_offset + * @irq_reg_offset: Array of offsets into IRQ registers */ struct ab8500 { struct device *dev; @@ -160,16 +237,20 @@ struct ab8500 { int irq_base; int irq; + enum ab8500_version version; u8 chip_id; - int (*write) (struct ab8500 *a8500, u16 addr, u8 data); - int (*read) (struct ab8500 *a8500, u16 addr); + int (*write)(struct ab8500 *ab8500, u16 addr, u8 data); + int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data); + int (*read)(struct ab8500 *ab8500, u16 addr); unsigned long tx_buf[4]; unsigned long rx_buf[4]; - u8 mask[AB8500_NUM_IRQ_REGS]; - u8 oldmask[AB8500_NUM_IRQ_REGS]; + u8 *mask; + u8 *oldmask; + int mask_size; + const int *irq_reg_offset; }; struct regulator_reg_init; @@ -195,7 +276,52 @@ struct ab8500_platform_data { struct ab8500_gpio_platform_data *gpio; }; -extern int __devinit ab8500_init(struct ab8500 *ab8500); +extern int __devinit ab8500_init(struct ab8500 *ab8500, + enum ab8500_version version); extern int __devexit ab8500_exit(struct ab8500 *ab8500); +static inline int is_ab8500(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8500; +} + +static inline int is_ab8505(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8505; +} + +static inline int is_ab9540(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB9540; +} + +static inline int is_ab8540(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8540; +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0)); +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1)); +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0)); +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_2p0(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0)); +} + #endif /* MFD_AB8500_H */ diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h new file mode 100644 index 000000000000..9b07725750c9 --- /dev/null +++ b/include/linux/mfd/abx500/ux500_chargalg.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _UX500_CHARGALG_H +#define _UX500_CHARGALG_H + +#include <linux/power_supply.h> + +#define psy_to_ux500_charger(x) container_of((x), \ + struct ux500_charger, psy) + +/* Forward declaration */ +struct ux500_charger; + +struct ux500_charger_ops { + int (*enable) (struct ux500_charger *, int, int, int); + int (*kick_wd) (struct ux500_charger *); + int (*update_curr) (struct ux500_charger *, int); +}; + +/** + * struct ux500_charger - power supply ux500 charger sub class + * @psy power supply base class + * @ops ux500 charger operations + * @max_out_volt maximum output charger voltage in mV + * @max_out_curr maximum output charger current in mA + */ +struct ux500_charger { + struct power_supply psy; + struct ux500_charger_ops ops; + int max_out_volt; + int max_out_curr; +}; + +#endif diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h new file mode 100644 index 000000000000..22c1007d3ec5 --- /dev/null +++ b/include/linux/mfd/anatop.h @@ -0,0 +1,40 @@ +/* + * anatop.h - Anatop MFD driver + * + * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> + * Copyright (C) 2012 Linaro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_MFD_ANATOP_H +#define __LINUX_MFD_ANATOP_H + +#include <linux/spinlock.h> + +/** + * anatop - MFD data + * @ioreg: ioremap register + * @reglock: spinlock for register read/write + */ +struct anatop { + void *ioreg; + spinlock_t reglock; +}; + +extern u32 anatop_get_bits(struct anatop *, u32, int, int); +extern void anatop_set_bits(struct anatop *, u32, int, int, u32); + +#endif /* __LINUX_MFD_ANATOP_H */ diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 5702d1be13b4..7ffbd6e9e7fc 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -76,8 +76,6 @@ enum da9052_chip_id { struct da9052_pdata; struct da9052 { - struct mutex io_lock; - struct device *dev; struct regmap *regmap; diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 60d27f7bfc1f..b3a43b1263fe 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -11,6 +11,24 @@ #define __MFD_DB8500_PRCMU_H #include <linux/interrupt.h> +#include <linux/bitops.h> + +/* + * Registers + */ +#define DB8500_PRCM_GPIOCR 0x138 +#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0 BIT(0) +#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD BIT(9) +#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 BIT(11) +#define DB8500_PRCM_GPIOCR_SPI2_SELECT BIT(23) + +#define DB8500_PRCM_LINE_VALUE 0x170 +#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0 BIT(3) + +#define DB8500_PRCM_DSI_SW_RESET 0x324 +#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0) +#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1) +#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2) /* This portion previously known as <mach/prcmu-fw-defs_v1.h> */ @@ -421,40 +439,22 @@ enum auto_enable { /* End of file previously known as prcmu-fw-defs_v1.h */ /** - * enum hw_acc_dev - enum for hw accelerators - * @HW_ACC_SVAMMDSP: for SVAMMDSP - * @HW_ACC_SVAPIPE: for SVAPIPE - * @HW_ACC_SIAMMDSP: for SIAMMDSP - * @HW_ACC_SIAPIPE: for SIAPIPE - * @HW_ACC_SGA: for SGA - * @HW_ACC_B2R2: for B2R2 - * @HW_ACC_MCDE: for MCDE - * @HW_ACC_ESRAM1: for ESRAM1 - * @HW_ACC_ESRAM2: for ESRAM2 - * @HW_ACC_ESRAM3: for ESRAM3 - * @HW_ACC_ESRAM4: for ESRAM4 - * @NUM_HW_ACC: number of hardware accelerators - * - * Different hw accelerators which can be turned ON/ - * OFF or put into retention (MMDSPs and ESRAMs). - * Used with EPOD API. + * enum prcmu_power_status - results from set_power_state + * @PRCMU_SLEEP_OK: Sleep went ok + * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok + * @PRCMU_IDLE_OK: Idle went ok + * @PRCMU_DEEPIDLE_OK: DeepIdle went ok + * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected + * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected * - * NOTE! Deprecated, to be removed when all users switched over to use the - * regulator API. */ -enum hw_acc_dev { - HW_ACC_SVAMMDSP, - HW_ACC_SVAPIPE, - HW_ACC_SIAMMDSP, - HW_ACC_SIAPIPE, - HW_ACC_SGA, - HW_ACC_B2R2, - HW_ACC_MCDE, - HW_ACC_ESRAM1, - HW_ACC_ESRAM2, - HW_ACC_ESRAM3, - HW_ACC_ESRAM4, - NUM_HW_ACC +enum prcmu_power_status { + PRCMU_SLEEP_OK = 0xf3, + PRCMU_DEEP_SLEEP_OK = 0xf6, + PRCMU_IDLE_OK = 0xf0, + PRCMU_DEEPIDLE_OK = 0xe3, + PRCMU_PRCMU2ARMPENDINGIT_ER = 0x91, + PRCMU_ARMPENDINGIT_ER = 0x93, }; /* @@ -493,6 +493,20 @@ struct prcmu_auto_pm_config { u8 sva_policy; }; +#define PRCMU_FW_PROJECT_U8500 2 +#define PRCMU_FW_PROJECT_U9500 4 +#define PRCMU_FW_PROJECT_U8500_C2 7 +#define PRCMU_FW_PROJECT_U9500_C2 11 +#define PRCMU_FW_PROJECT_U8520 13 +#define PRCMU_FW_PROJECT_U8420 14 + +struct prcmu_fw_version { + u8 project; + u8 api_version; + u8 func_version; + u8 errata; +}; + #ifdef CONFIG_MFD_DB8500_PRCMU void db8500_prcmu_early_init(void); @@ -500,42 +514,41 @@ int prcmu_set_rc_a2p(enum romcode_write); enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); -bool prcmu_is_u8400(void); -int prcmu_set_ape_opp(u8 opp); -int prcmu_get_ape_opp(void); +struct prcmu_fw_version *prcmu_get_fw_version(void); int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); -int prcmu_set_ddr_opp(u8 opp); -int prcmu_get_ddr_opp(void); -/* NOTE! Use regulator framework instead */ -int prcmu_set_hwacc(u16 hw_acc_dev, u8 state); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle); bool prcmu_is_auto_pm_enabled(void); int prcmu_config_clkout(u8 clkout, u8 source, u8 div); int prcmu_set_clock_divider(u8 clock, u8 divider); -int prcmu_config_hotdog(u8 threshold); -int prcmu_config_hotmon(u8 low, u8 high); -int prcmu_start_temp_sense(u16 cycles32k); -int prcmu_stop_temp_sense(void); +int db8500_prcmu_config_hotdog(u8 threshold); +int db8500_prcmu_config_hotmon(u8 low, u8 high); +int db8500_prcmu_start_temp_sense(u16 cycles32k); +int db8500_prcmu_stop_temp_sense(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); void prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); -void prcmu_modem_reset(void); -void prcmu_enable_spi2(void); -void prcmu_disable_spi2(void); +void db8500_prcmu_modem_reset(void); -int prcmu_config_a9wdog(u8 num, bool sleep_auto_off); -int prcmu_enable_a9wdog(u8 id); -int prcmu_disable_a9wdog(u8 id); -int prcmu_kick_a9wdog(u8 id); -int prcmu_load_a9wdog(u8 id, u32 val); +int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off); +int db8500_prcmu_enable_a9wdog(u8 id); +int db8500_prcmu_disable_a9wdog(u8 id); +int db8500_prcmu_kick_a9wdog(u8 id); +int db8500_prcmu_load_a9wdog(u8 id, u32 val); void db8500_prcmu_system_reset(u16 reset_code); int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); +u8 db8500_prcmu_get_power_state_result(void); +int db8500_prcmu_gic_decouple(void); +int db8500_prcmu_gic_recouple(void); +int db8500_prcmu_copy_gic_settings(void); +bool db8500_prcmu_gic_pending_irq(void); +bool db8500_prcmu_pending_irq(void); +bool db8500_prcmu_is_cpu_in_wfi(int cpu); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); int db8500_prcmu_request_clock(u8 clock, bool enable); @@ -549,6 +562,14 @@ u16 db8500_prcmu_get_reset_code(void); bool db8500_prcmu_is_ac_wake_requested(void); int db8500_prcmu_set_arm_opp(u8 opp); int db8500_prcmu_get_arm_opp(void); +int db8500_prcmu_set_ape_opp(u8 opp); +int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_set_ddr_opp(u8 opp); +int db8500_prcmu_get_ddr_opp(void); + +u32 db8500_prcmu_read(unsigned int reg); +void db8500_prcmu_write(unsigned int reg, u32 value); +void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value); #else /* !CONFIG_MFD_DB8500_PRCMU */ @@ -574,17 +595,17 @@ static inline bool prcmu_has_arm_maxopp(void) return false; } -static inline bool prcmu_is_u8400(void) +static inline struct prcmu_fw_version *prcmu_get_fw_version(void) { - return false; + return NULL; } -static inline int prcmu_set_ape_opp(u8 opp) +static inline int db8500_prcmu_set_ape_opp(u8 opp) { return 0; } -static inline int prcmu_get_ape_opp(void) +static inline int db8500_prcmu_get_ape_opp(void) { return APE_100_OPP; } @@ -599,21 +620,16 @@ static inline int prcmu_release_usb_wakeup_state(void) return 0; } -static inline int prcmu_set_ddr_opp(u8 opp) +static inline int db8500_prcmu_set_ddr_opp(u8 opp) { return 0; } -static inline int prcmu_get_ddr_opp(void) +static inline int db8500_prcmu_get_ddr_opp(void) { return DDR_100_OPP; } -static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state) -{ - return 0; -} - static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle) { @@ -634,22 +650,22 @@ static inline int prcmu_set_clock_divider(u8 clock, u8 divider) return 0; } -static inline int prcmu_config_hotdog(u8 threshold) +static inline int db8500_prcmu_config_hotdog(u8 threshold) { return 0; } -static inline int prcmu_config_hotmon(u8 low, u8 high) +static inline int db8500_prcmu_config_hotmon(u8 low, u8 high) { return 0; } -static inline int prcmu_start_temp_sense(u16 cycles32k) +static inline int db8500_prcmu_start_temp_sense(u16 cycles32k) { return 0; } -static inline int prcmu_stop_temp_sense(void) +static inline int db8500_prcmu_stop_temp_sense(void) { return 0; } @@ -668,22 +684,17 @@ static inline void prcmu_ac_wake_req(void) {} static inline void prcmu_ac_sleep_req(void) {} -static inline void prcmu_modem_reset(void) {} +static inline void db8500_prcmu_modem_reset(void) {} -static inline int prcmu_enable_spi2(void) -{ - return 0; -} +static inline void db8500_prcmu_system_reset(u16 reset_code) {} -static inline int prcmu_disable_spi2(void) +static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, + bool keep_ap_pll) { return 0; } -static inline void db8500_prcmu_system_reset(u16 reset_code) {} - -static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, - bool keep_ap_pll) +static inline u8 db8500_prcmu_get_power_state_result(void) { return 0; } @@ -729,27 +740,27 @@ static inline u16 db8500_prcmu_get_reset_code(void) return 0; } -static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off) { return 0; } -static inline int prcmu_enable_a9wdog(u8 id) +static inline int db8500_prcmu_enable_a9wdog(u8 id) { return 0; } -static inline int prcmu_disable_a9wdog(u8 id) +static inline int db8500_prcmu_disable_a9wdog(u8 id) { return 0; } -static inline int prcmu_kick_a9wdog(u8 id) +static inline int db8500_prcmu_kick_a9wdog(u8 id) { return 0; } -static inline int prcmu_load_a9wdog(u8 id, u32 val) +static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val) { return 0; } @@ -769,6 +780,16 @@ static inline int db8500_prcmu_get_arm_opp(void) return 0; } +static inline u32 db8500_prcmu_read(unsigned int reg) +{ + return 0; +} + +static inline void db8500_prcmu_write(unsigned int reg, u32 value) {} + +static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask, + u32 value) {} + #endif /* !CONFIG_MFD_DB8500_PRCMU */ #endif /* __MFD_DB8500_PRCMU_H */ diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index bac942f959c1..d7674eb7305f 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -10,7 +10,7 @@ #include <linux/interrupt.h> #include <linux/notifier.h> -#include <asm/mach-types.h> +#include <linux/err.h> /* PRCMU Wakeup defines */ enum prcmu_wakeup_index { @@ -80,6 +80,29 @@ enum prcmu_wakeup_index { #define EPOD_STATE_ON_CLK_OFF 0x03 #define EPOD_STATE_ON 0x04 +/* DB5500 CLKOUT IDs */ +enum { + DB5500_CLKOUT0 = 0, + DB5500_CLKOUT1, +}; + +/* DB5500 CLKOUTx sources */ +enum { + DB5500_CLKOUT_REF_CLK_SEL0, + DB5500_CLKOUT_RTC_CLK0_SEL0, + DB5500_CLKOUT_ULP_CLK_SEL0, + DB5500_CLKOUT_STATIC0, + DB5500_CLKOUT_REFCLK, + DB5500_CLKOUT_ULPCLK, + DB5500_CLKOUT_ARMCLK, + DB5500_CLKOUT_SYSACC0CLK, + DB5500_CLKOUT_SOC0PLLCLK, + DB5500_CLKOUT_SOC1PLLCLK, + DB5500_CLKOUT_DDRPLLCLK, + DB5500_CLKOUT_TVCLK, + DB5500_CLKOUT_IRDACLK, +}; + /* * CLKOUT sources */ @@ -111,6 +134,7 @@ enum prcmu_clock { PRCMU_MSP1CLK, PRCMU_I2CCLK, PRCMU_SDMMCCLK, + PRCMU_SPARE1CLK, PRCMU_SLIMCLK, PRCMU_PER1CLK, PRCMU_PER2CLK, @@ -139,12 +163,20 @@ enum prcmu_clock { PRCMU_IRRCCLK, PRCMU_SIACLK, PRCMU_SVACLK, + PRCMU_ACLK, PRCMU_NUM_REG_CLOCKS, PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS, + PRCMU_CDCLK, PRCMU_TIMCLK, PRCMU_PLLSOC0, PRCMU_PLLSOC1, PRCMU_PLLDDR, + PRCMU_PLLDSI, + PRCMU_DSI0CLK, + PRCMU_DSI1CLK, + PRCMU_DSI0ESCCLK, + PRCMU_DSI1ESCCLK, + PRCMU_DSI2ESCCLK, }; /** @@ -153,12 +185,14 @@ enum prcmu_clock { * @APE_NO_CHANGE: The APE operating point is unchanged * @APE_100_OPP: The new APE operating point is ape100opp * @APE_50_OPP: 50% + * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%. */ enum ape_opp { APE_OPP_INIT = 0x00, APE_NO_CHANGE = 0x01, APE_100_OPP = 0x02, - APE_50_OPP = 0x03 + APE_50_OPP = 0x03, + APE_50_PARTLY_25_OPP = 0xFF, }; /** @@ -218,9 +252,11 @@ enum ddr_pwrst { #if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500) +#include <mach/id.h> + static inline void __init prcmu_early_init(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_early_init(); else return db8500_prcmu_early_init(); @@ -229,7 +265,7 @@ static inline void __init prcmu_early_init(void) static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_set_power_state(state, keep_ulp_clk, keep_ap_pll); else @@ -237,9 +273,65 @@ static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, keep_ap_pll); } +static inline u8 prcmu_get_power_state_result(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_get_power_state_result(); +} + +static inline int prcmu_gic_decouple(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_decouple(); +} + +static inline int prcmu_gic_recouple(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_recouple(); +} + +static inline bool prcmu_gic_pending_irq(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_pending_irq(); +} + +static inline bool prcmu_is_cpu_in_wfi(int cpu) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_is_cpu_in_wfi(cpu); +} + +static inline int prcmu_copy_gic_settings(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_copy_gic_settings(); +} + +static inline bool prcmu_pending_irq(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_pending_irq(); +} + static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_set_epod(epod_id, epod_state); @@ -247,7 +339,7 @@ static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) static inline void prcmu_enable_wakeups(u32 wakeups) { - if (machine_is_u5500()) + if (cpu_is_u5500()) db5500_prcmu_enable_wakeups(wakeups); else db8500_prcmu_enable_wakeups(wakeups); @@ -260,7 +352,7 @@ static inline void prcmu_disable_wakeups(void) static inline void prcmu_config_abb_event_readout(u32 abb_events) { - if (machine_is_u5500()) + if (cpu_is_u5500()) db5500_prcmu_config_abb_event_readout(abb_events); else db8500_prcmu_config_abb_event_readout(abb_events); @@ -268,7 +360,7 @@ static inline void prcmu_config_abb_event_readout(u32 abb_events) static inline void prcmu_get_abb_event_buffer(void __iomem **buf) { - if (machine_is_u5500()) + if (cpu_is_u5500()) db5500_prcmu_get_abb_event_buffer(buf); else db8500_prcmu_get_abb_event_buffer(buf); @@ -276,25 +368,40 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf) int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size); int prcmu_config_clkout(u8 clkout, u8 source, u8 div); static inline int prcmu_request_clock(u8 clock, bool enable) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_request_clock(clock, enable); else return db8500_prcmu_request_clock(clock, enable); } -int prcmu_set_ape_opp(u8 opp); -int prcmu_get_ape_opp(void); -int prcmu_set_ddr_opp(u8 opp); -int prcmu_get_ddr_opp(void); +unsigned long prcmu_clock_rate(u8 clock); +long prcmu_round_clock_rate(u8 clock, unsigned long rate); +int prcmu_set_clock_rate(u8 clock, unsigned long rate); + +static inline int prcmu_set_ddr_opp(u8 opp) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_set_ddr_opp(opp); +} +static inline int prcmu_get_ddr_opp(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_get_ddr_opp(); +} static inline int prcmu_set_arm_opp(u8 opp) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_set_arm_opp(opp); @@ -302,15 +409,31 @@ static inline int prcmu_set_arm_opp(u8 opp) static inline int prcmu_get_arm_opp(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_get_arm_opp(); } +static inline int prcmu_set_ape_opp(u8 opp) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_set_ape_opp(opp); +} + +static inline int prcmu_get_ape_opp(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_get_ape_opp(); +} + static inline void prcmu_system_reset(u16 reset_code) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_system_reset(reset_code); else return db8500_prcmu_system_reset(reset_code); @@ -318,7 +441,7 @@ static inline void prcmu_system_reset(u16 reset_code) static inline u16 prcmu_get_reset_code(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_get_reset_code(); else return db8500_prcmu_get_reset_code(); @@ -326,10 +449,17 @@ static inline u16 prcmu_get_reset_code(void) void prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); -void prcmu_modem_reset(void); +static inline void prcmu_modem_reset(void) +{ + if (cpu_is_u5500()) + return; + else + return db8500_prcmu_modem_reset(); +} + static inline bool prcmu_is_ac_wake_requested(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_is_ac_wake_requested(); else return db8500_prcmu_is_ac_wake_requested(); @@ -337,7 +467,7 @@ static inline bool prcmu_is_ac_wake_requested(void) static inline int prcmu_set_display_clocks(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_set_display_clocks(); else return db8500_prcmu_set_display_clocks(); @@ -345,7 +475,7 @@ static inline int prcmu_set_display_clocks(void) static inline int prcmu_disable_dsipll(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_disable_dsipll(); else return db8500_prcmu_disable_dsipll(); @@ -353,7 +483,7 @@ static inline int prcmu_disable_dsipll(void) static inline int prcmu_enable_dsipll(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_enable_dsipll(); else return db8500_prcmu_enable_dsipll(); @@ -361,11 +491,107 @@ static inline int prcmu_enable_dsipll(void) static inline int prcmu_config_esram0_deep_sleep(u8 state) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_config_esram0_deep_sleep(state); } + +static inline int prcmu_config_hotdog(u8 threshold) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_config_hotdog(threshold); +} + +static inline int prcmu_config_hotmon(u8 low, u8 high) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_config_hotmon(low, high); +} + +static inline int prcmu_start_temp_sense(u16 cycles32k) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_start_temp_sense(cycles32k); +} + +static inline int prcmu_stop_temp_sense(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_stop_temp_sense(); +} + +static inline u32 prcmu_read(unsigned int reg) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_read(reg); +} + +static inline void prcmu_write(unsigned int reg, u32 value) +{ + if (cpu_is_u5500()) + return; + else + db8500_prcmu_write(reg, value); +} + +static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) +{ + if (cpu_is_u5500()) + return; + else + db8500_prcmu_write_masked(reg, mask, value); +} + +static inline int prcmu_enable_a9wdog(u8 id) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_enable_a9wdog(id); +} + +static inline int prcmu_disable_a9wdog(u8 id) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_disable_a9wdog(id); +} + +static inline int prcmu_kick_a9wdog(u8 id) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_kick_a9wdog(id); +} + +static inline int prcmu_load_a9wdog(u8 id, u32 timeout) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_load_a9wdog(id, timeout); +} + +static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_config_a9wdog(num, sleep_auto_off); +} #else static inline void __init prcmu_early_init(void) {} @@ -395,6 +621,12 @@ static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) return -ENOSYS; } +static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, + u8 size) +{ + return -ENOSYS; +} + static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div) { return 0; @@ -405,6 +637,21 @@ static inline int prcmu_request_clock(u8 clock, bool enable) return 0; } +static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate) +{ + return 0; +} + +static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate) +{ + return 0; +} + +static inline unsigned long prcmu_clock_rate(u8 clock) +{ + return 0; +} + static inline int prcmu_set_ape_opp(u8 opp) { return 0; @@ -480,14 +727,133 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf) *buf = NULL; } +static inline int prcmu_config_hotdog(u8 threshold) +{ + return 0; +} + +static inline int prcmu_config_hotmon(u8 low, u8 high) +{ + return 0; +} + +static inline int prcmu_start_temp_sense(u16 cycles32k) +{ + return 0; +} + +static inline int prcmu_stop_temp_sense(void) +{ + return 0; +} + +static inline u32 prcmu_read(unsigned int reg) +{ + return 0; +} + +static inline void prcmu_write(unsigned int reg, u32 value) {} + +static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {} + +#endif + +static inline void prcmu_set(unsigned int reg, u32 bits) +{ + prcmu_write_masked(reg, bits, bits); +} + +static inline void prcmu_clear(unsigned int reg, u32 bits) +{ + prcmu_write_masked(reg, bits, 0); +} + +#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500) + +/** + * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. + */ +static inline void prcmu_enable_spi2(void) +{ + if (cpu_is_u8500()) + prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT); +} + +/** + * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1. + */ +static inline void prcmu_disable_spi2(void) +{ + if (cpu_is_u8500()) + prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT); +} + +/** + * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD + * and UARTMOD on OtherAlternateC3. + */ +static inline void prcmu_enable_stm_mod_uart(void) +{ + if (cpu_is_u8500()) { + prcmu_set(DB8500_PRCM_GPIOCR, + (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 | + DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0)); + } +} + +/** + * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD + * and UARTMOD on OtherAlternateC3. + */ +static inline void prcmu_disable_stm_mod_uart(void) +{ + if (cpu_is_u8500()) { + prcmu_clear(DB8500_PRCM_GPIOCR, + (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 | + DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0)); + } +} + +/** + * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1. + */ +static inline void prcmu_enable_stm_ape(void) +{ + if (cpu_is_u8500()) { + prcmu_set(DB8500_PRCM_GPIOCR, + DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD); + } +} + +/** + * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1. + */ +static inline void prcmu_disable_stm_ape(void) +{ + if (cpu_is_u8500()) { + prcmu_clear(DB8500_PRCM_GPIOCR, + DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD); + } +} + +#else + +static inline void prcmu_enable_spi2(void) {} +static inline void prcmu_disable_spi2(void) {} +static inline void prcmu_enable_stm_mod_uart(void) {} +static inline void prcmu_disable_stm_mod_uart(void) {} +static inline void prcmu_enable_stm_ape(void) {} +static inline void prcmu_disable_stm_ape(void) {} + #endif /* PRCMU QoS APE OPP class */ #define PRCMU_QOS_APE_OPP 1 #define PRCMU_QOS_DDR_OPP 2 +#define PRCMU_QOS_ARM_OPP 3 #define PRCMU_QOS_DEFAULT_VALUE -1 -#ifdef CONFIG_UX500_PRCMU_QOS_POWER +#ifdef CONFIG_DBX500_PRCMU_QOS_POWER unsigned long prcmu_qos_get_cpufreq_opp_delay(void); void prcmu_qos_set_cpufreq_opp_delay(unsigned long); diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index fff590521e50..28726dd540f2 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -131,6 +131,55 @@ struct max8997_muic_platform_data { int num_init_data; }; +enum max8997_haptic_motor_type { + MAX8997_HAPTIC_ERM, + MAX8997_HAPTIC_LRA, +}; + +enum max8997_haptic_pulse_mode { + MAX8997_EXTERNAL_MODE, + MAX8997_INTERNAL_MODE, +}; + +enum max8997_haptic_pwm_divisor { + MAX8997_PWM_DIVISOR_32, + MAX8997_PWM_DIVISOR_64, + MAX8997_PWM_DIVISOR_128, + MAX8997_PWM_DIVISOR_256, +}; + +/** + * max8997_haptic_platform_data + * @pwm_channel_id: channel number of PWM device + * valid for MAX8997_EXTERNAL_MODE + * @pwm_period: period in nano second for PWM device + * valid for MAX8997_EXTERNAL_MODE + * @type: motor type + * @mode: pulse mode + * MAX8997_EXTERNAL_MODE: external PWM device is used to control motor + * MAX8997_INTERNAL_MODE: internal pulse generator is used to control motor + * @pwm_divisor: divisor for external PWM device + * @internal_mode_pattern: internal mode pattern for internal mode + * [0 - 3]: valid pattern number + * @pattern_cycle: the number of cycles of the waveform + * for the internal mode pattern + * [0 - 15]: available cycles + * @pattern_signal_period: period of the waveform for the internal mode pattern + * [0 - 255]: available period + */ +struct max8997_haptic_platform_data { + unsigned int pwm_channel_id; + unsigned int pwm_period; + + enum max8997_haptic_motor_type type; + enum max8997_haptic_pulse_mode mode; + enum max8997_haptic_pwm_divisor pwm_divisor; + + unsigned int internal_mode_pattern; + unsigned int pattern_cycle; + unsigned int pattern_signal_period; +}; + enum max8997_led_mode { MAX8997_NONE, MAX8997_FLASH_MODE, @@ -192,7 +241,9 @@ struct max8997_platform_data { /* ---- MUIC ---- */ struct max8997_muic_platform_data *muic_pdata; - /* HAPTIC: Not implemented */ + /* ---- HAPTIC ---- */ + struct max8997_haptic_platform_data *haptic_pdata; + /* RTC: Not implemented */ /* ---- LED ---- */ struct max8997_led_platform_data *led_pdata; diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index b86ee45c8b03..10e038bac8dd 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -38,7 +38,8 @@ int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq); int mc13xxx_get_flags(struct mc13xxx *mc13xxx); int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, - unsigned int mode, unsigned int channel, unsigned int *sample); + unsigned int mode, unsigned int channel, + u8 ato, bool atox, unsigned int *sample); #define MC13XXX_IRQ_ADCDONE 0 #define MC13XXX_IRQ_ADCBISDONE 1 @@ -157,6 +158,18 @@ struct mc13xxx_buttons_platform_data { unsigned short b3on_key; }; +struct mc13xxx_ts_platform_data { + /* Delay between Touchscreen polarization and ADC Conversion. + * Given in clock ticks of a 32 kHz clock which gives a granularity of + * about 30.5ms */ + u8 ato; + +#define MC13783_TS_ATO_FIRST false +#define MC13783_TS_ATO_EACH true + /* Use the ATO delay only for the first conversion or for each one */ + bool atox; +}; + struct mc13xxx_platform_data { #define MC13XXX_USE_TOUCHSCREEN (1 << 0) #define MC13XXX_USE_CODEC (1 << 1) @@ -167,6 +180,7 @@ struct mc13xxx_platform_data { struct mc13xxx_regulator_platform_data regulators; struct mc13xxx_leds_platform_data *leds; struct mc13xxx_buttons_platform_data *buttons; + struct mc13xxx_ts_platform_data touch; }; #define MC13XXX_ADC_MODE_TS 1 diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h index f88c1cc0cb0f..a9e8bd157673 100644 --- a/include/linux/mfd/mcp.h +++ b/include/linux/mfd/mcp.h @@ -10,8 +10,6 @@ #ifndef MCP_H #define MCP_H -#include <mach/dma.h> - struct mcp_ops; struct mcp { @@ -21,12 +19,7 @@ struct mcp { int use_count; unsigned int sclk_rate; unsigned int rw_timeout; - dma_device_t dma_audio_rd; - dma_device_t dma_audio_wr; - dma_device_t dma_telco_rd; - dma_device_t dma_telco_wr; struct device attached_device; - int gpio_base; }; struct mcp_ops { @@ -47,15 +40,14 @@ void mcp_disable(struct mcp *); #define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) struct mcp *mcp_host_alloc(struct device *, size_t); -int mcp_host_register(struct mcp *); -void mcp_host_unregister(struct mcp *); +int mcp_host_add(struct mcp *, void *); +void mcp_host_del(struct mcp *); +void mcp_host_free(struct mcp *); struct mcp_driver { struct device_driver drv; int (*probe)(struct mcp *); void (*remove)(struct mcp *); - int (*suspend)(struct mcp *, pm_message_t); - int (*resume)(struct mcp *); }; int mcp_driver_register(struct mcp_driver *); diff --git a/include/linux/mfd/pm8xxx/pm8921.h b/include/linux/mfd/pm8xxx/pm8921.h index d5517fd32d1b..00fa3de7659d 100644 --- a/include/linux/mfd/pm8xxx/pm8921.h +++ b/include/linux/mfd/pm8xxx/pm8921.h @@ -18,7 +18,6 @@ #ifndef __MFD_PM8921_H #define __MFD_PM8921_H -#include <linux/device.h> #include <linux/mfd/pm8xxx/irq.h> #define PM8921_NR_IRQS 256 diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h new file mode 100644 index 000000000000..a2c61609d21d --- /dev/null +++ b/include/linux/mfd/rc5t583.h @@ -0,0 +1,295 @@ +/* + * Core driver interface to access RICOH_RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef __LINUX_MFD_RC5T583_H +#define __LINUX_MFD_RC5T583_H + +#include <linux/mutex.h> +#include <linux/types.h> + +#define RC5T583_MAX_REGS 0xF8 + +/* Maximum number of main interrupts */ +#define MAX_MAIN_INTERRUPT 5 +#define RC5T583_MAX_GPEDGE_REG 2 +#define RC5T583_MAX_INTERRUPT_MASK_REGS 9 + +/* Interrupt enable register */ +#define RC5T583_INT_EN_SYS1 0x19 +#define RC5T583_INT_EN_SYS2 0x1D +#define RC5T583_INT_EN_DCDC 0x41 +#define RC5T583_INT_EN_RTC 0xED +#define RC5T583_INT_EN_ADC1 0x90 +#define RC5T583_INT_EN_ADC2 0x91 +#define RC5T583_INT_EN_ADC3 0x92 + +/* Interrupt status registers (monitor regs in Ricoh)*/ +#define RC5T583_INTC_INTPOL 0xAD +#define RC5T583_INTC_INTEN 0xAE +#define RC5T583_INTC_INTMON 0xAF + +#define RC5T583_INT_MON_GRP 0xAF +#define RC5T583_INT_MON_SYS1 0x1B +#define RC5T583_INT_MON_SYS2 0x1F +#define RC5T583_INT_MON_DCDC 0x43 +#define RC5T583_INT_MON_RTC 0xEE + +/* Interrupt clearing registers */ +#define RC5T583_INT_IR_SYS1 0x1A +#define RC5T583_INT_IR_SYS2 0x1E +#define RC5T583_INT_IR_DCDC 0x42 +#define RC5T583_INT_IR_RTC 0xEE +#define RC5T583_INT_IR_ADCL 0x94 +#define RC5T583_INT_IR_ADCH 0x95 +#define RC5T583_INT_IR_ADCEND 0x96 +#define RC5T583_INT_IR_GPIOR 0xA9 +#define RC5T583_INT_IR_GPIOF 0xAA + +/* Sleep sequence registers */ +#define RC5T583_SLPSEQ1 0x21 +#define RC5T583_SLPSEQ2 0x22 +#define RC5T583_SLPSEQ3 0x23 +#define RC5T583_SLPSEQ4 0x24 +#define RC5T583_SLPSEQ5 0x25 +#define RC5T583_SLPSEQ6 0x26 +#define RC5T583_SLPSEQ7 0x27 +#define RC5T583_SLPSEQ8 0x28 +#define RC5T583_SLPSEQ9 0x29 +#define RC5T583_SLPSEQ10 0x2A +#define RC5T583_SLPSEQ11 0x2B + +/* Regulator registers */ +#define RC5T583_REG_DC0CTL 0x30 +#define RC5T583_REG_DC0DAC 0x31 +#define RC5T583_REG_DC0LATCTL 0x32 +#define RC5T583_REG_SR0CTL 0x33 + +#define RC5T583_REG_DC1CTL 0x34 +#define RC5T583_REG_DC1DAC 0x35 +#define RC5T583_REG_DC1LATCTL 0x36 +#define RC5T583_REG_SR1CTL 0x37 + +#define RC5T583_REG_DC2CTL 0x38 +#define RC5T583_REG_DC2DAC 0x39 +#define RC5T583_REG_DC2LATCTL 0x3A +#define RC5T583_REG_SR2CTL 0x3B + +#define RC5T583_REG_DC3CTL 0x3C +#define RC5T583_REG_DC3DAC 0x3D +#define RC5T583_REG_DC3LATCTL 0x3E +#define RC5T583_REG_SR3CTL 0x3F + + +#define RC5T583_REG_LDOEN1 0x50 +#define RC5T583_REG_LDOEN2 0x51 +#define RC5T583_REG_LDODIS1 0x52 +#define RC5T583_REG_LDODIS2 0x53 + +#define RC5T583_REG_LDO0DAC 0x54 +#define RC5T583_REG_LDO1DAC 0x55 +#define RC5T583_REG_LDO2DAC 0x56 +#define RC5T583_REG_LDO3DAC 0x57 +#define RC5T583_REG_LDO4DAC 0x58 +#define RC5T583_REG_LDO5DAC 0x59 +#define RC5T583_REG_LDO6DAC 0x5A +#define RC5T583_REG_LDO7DAC 0x5B +#define RC5T583_REG_LDO8DAC 0x5C +#define RC5T583_REG_LDO9DAC 0x5D + +#define RC5T583_REG_DC0DAC_DS 0x60 +#define RC5T583_REG_DC1DAC_DS 0x61 +#define RC5T583_REG_DC2DAC_DS 0x62 +#define RC5T583_REG_DC3DAC_DS 0x63 + +#define RC5T583_REG_LDO0DAC_DS 0x64 +#define RC5T583_REG_LDO1DAC_DS 0x65 +#define RC5T583_REG_LDO2DAC_DS 0x66 +#define RC5T583_REG_LDO3DAC_DS 0x67 +#define RC5T583_REG_LDO4DAC_DS 0x68 +#define RC5T583_REG_LDO5DAC_DS 0x69 +#define RC5T583_REG_LDO6DAC_DS 0x6A +#define RC5T583_REG_LDO7DAC_DS 0x6B +#define RC5T583_REG_LDO8DAC_DS 0x6C +#define RC5T583_REG_LDO9DAC_DS 0x6D + +/* GPIO register base address */ +#define RC5T583_GPIO_IOSEL 0xA0 +#define RC5T583_GPIO_PDEN 0xA1 +#define RC5T583_GPIO_IOOUT 0xA2 +#define RC5T583_GPIO_PGSEL 0xA3 +#define RC5T583_GPIO_GPINV 0xA4 +#define RC5T583_GPIO_GPDEB 0xA5 +#define RC5T583_GPIO_GPEDGE1 0xA6 +#define RC5T583_GPIO_GPEDGE2 0xA7 +#define RC5T583_GPIO_EN_INT 0xA8 +#define RC5T583_GPIO_MON_IOIN 0xAB +#define RC5T583_GPIO_GPOFUNC 0xAC + +/* RICOH_RC5T583 IRQ definitions */ +enum { + RC5T583_IRQ_ONKEY, + RC5T583_IRQ_ACOK, + RC5T583_IRQ_LIDOPEN, + RC5T583_IRQ_PREOT, + RC5T583_IRQ_CLKSTP, + RC5T583_IRQ_ONKEY_OFF, + RC5T583_IRQ_WD, + RC5T583_IRQ_EN_PWRREQ1, + RC5T583_IRQ_EN_PWRREQ2, + RC5T583_IRQ_PRE_VINDET, + + RC5T583_IRQ_DC0LIM, + RC5T583_IRQ_DC1LIM, + RC5T583_IRQ_DC2LIM, + RC5T583_IRQ_DC3LIM, + + RC5T583_IRQ_CTC, + RC5T583_IRQ_YALE, + RC5T583_IRQ_DALE, + RC5T583_IRQ_WALE, + + RC5T583_IRQ_AIN1L, + RC5T583_IRQ_AIN2L, + RC5T583_IRQ_AIN3L, + RC5T583_IRQ_VBATL, + RC5T583_IRQ_VIN3L, + RC5T583_IRQ_VIN8L, + RC5T583_IRQ_AIN1H, + RC5T583_IRQ_AIN2H, + RC5T583_IRQ_AIN3H, + RC5T583_IRQ_VBATH, + RC5T583_IRQ_VIN3H, + RC5T583_IRQ_VIN8H, + RC5T583_IRQ_ADCEND, + + RC5T583_IRQ_GPIO0, + RC5T583_IRQ_GPIO1, + RC5T583_IRQ_GPIO2, + RC5T583_IRQ_GPIO3, + RC5T583_IRQ_GPIO4, + RC5T583_IRQ_GPIO5, + RC5T583_IRQ_GPIO6, + RC5T583_IRQ_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_IRQS, +}; + +/* Ricoh583 gpio definitions */ +enum { + RC5T583_GPIO0, + RC5T583_GPIO1, + RC5T583_GPIO2, + RC5T583_GPIO3, + RC5T583_GPIO4, + RC5T583_GPIO5, + RC5T583_GPIO6, + RC5T583_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_GPIO, +}; + +enum { + RC5T583_DS_NONE, + RC5T583_DS_DC0, + RC5T583_DS_DC1, + RC5T583_DS_DC2, + RC5T583_DS_DC3, + RC5T583_DS_LDO0, + RC5T583_DS_LDO1, + RC5T583_DS_LDO2, + RC5T583_DS_LDO3, + RC5T583_DS_LDO4, + RC5T583_DS_LDO5, + RC5T583_DS_LDO6, + RC5T583_DS_LDO7, + RC5T583_DS_LDO8, + RC5T583_DS_LDO9, + RC5T583_DS_PSO0, + RC5T583_DS_PSO1, + RC5T583_DS_PSO2, + RC5T583_DS_PSO3, + RC5T583_DS_PSO4, + RC5T583_DS_PSO5, + RC5T583_DS_PSO6, + RC5T583_DS_PSO7, + + /* Should be last entry */ + RC5T583_DS_MAX, +}; + +/* + * Ricoh pmic RC5T583 supports sleep through two external controls. + * The output of gpios and regulator can be enable/disable through + * this external signals. + */ +enum { + RC5T583_EXT_PWRREQ1_CONTROL = 0x1, + RC5T583_EXT_PWRREQ2_CONTROL = 0x2, +}; + +struct rc5t583 { + struct device *dev; + struct regmap *regmap; + int chip_irq; + int irq_base; + struct mutex irq_lock; + unsigned long group_irq_en[MAX_MAIN_INTERRUPT]; + + /* For main interrupt bits in INTC */ + uint8_t intc_inten_reg; + + /* For group interrupt bits and address */ + uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS]; + + /* For gpio edge */ + uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG]; +}; + +/* + * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu. + * The board specific data is provided through this structure. + * @irq_base: Irq base number on which this device registers their interrupts. + * @enable_shutdown: Enable shutdown through the input pin "shutdown". + */ + +struct rc5t583_platform_data { + int irq_base; + bool enable_shutdown; +}; + +int rc5t583_write(struct device *dev, u8 reg, uint8_t val); +int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val); +int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask); +int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id, + int ext_pwr_req, int deepsleep_slot_nr); +int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base); +int rc5t583_irq_exit(struct rc5t583 *rc5t583); + +#endif diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index ca1d7a347600..8516fd1eaabc 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -8,7 +8,9 @@ #ifndef __LINUX_MFD_STMPE_H #define __LINUX_MFD_STMPE_H -#include <linux/device.h> +#include <linux/mutex.h> + +struct device; enum stmpe_block { STMPE_BLOCK_GPIO = 1 << 0, @@ -26,6 +28,7 @@ enum stmpe_partnum { STMPE1601, STMPE2401, STMPE2403, + STMPE_NBR_PARTS }; /* diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h index 16c76e124f9c..3acb3a8e3af5 100644 --- a/include/linux/mfd/tc3589x.h +++ b/include/linux/mfd/tc3589x.h @@ -7,7 +7,7 @@ #ifndef __LINUX_MFD_TC3589x_H #define __LINUX_MFD_TC3589x_H -#include <linux/device.h> +struct device; enum tx3589x_block { TC3589x_BLOCK_GPIO = 1 << 0, diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 0dc98044d8b7..f5171dbf8850 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -1,8 +1,10 @@ #ifndef MFD_TMIO_H #define MFD_TMIO_H +#include <linux/device.h> #include <linux/fb.h> #include <linux/io.h> +#include <linux/jiffies.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> @@ -64,8 +66,8 @@ #define TMIO_MMC_SDIO_IRQ (1 << 2) /* * Some platforms can detect card insertion events with controller powered - * down, in which case they have to call tmio_mmc_cd_wakeup() to power up the - * controller and report the event to the driver. + * down, using a GPIO IRQ, in which case they have to fill in cd_irq, cd_gpio, + * and cd_flags fields of struct tmio_mmc_data. */ #define TMIO_MMC_HAS_COLD_CD (1 << 3) /* @@ -73,6 +75,12 @@ * idle before writing to some registers. */ #define TMIO_MMC_HAS_IDLE_WAIT (1 << 4) +/* + * A GPIO is used for card hotplug detection. We need an extra flag for this, + * because 0 is a valid GPIO number too, and requiring users to specify + * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility. + */ +#define TMIO_MMC_USE_GPIO_CD (1 << 5) int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); @@ -97,19 +105,23 @@ struct tmio_mmc_data { u32 ocr_mask; /* available voltages */ struct tmio_mmc_dma *dma; struct device *dev; - bool power; + unsigned int cd_gpio; void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); int (*get_cd)(struct platform_device *host); int (*write16_hook)(struct tmio_mmc_host *host, int addr); }; +/* + * This function is deprecated and will be removed soon. Please, convert your + * platform to use drivers/mmc/core/cd-gpio.c + */ +#include <linux/mmc/host.h> static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata) { - if (pdata && !pdata->power) { - pdata->power = true; - pm_runtime_get(pdata->dev); - } + if (pdata) + mmc_detect_change(dev_get_drvdata(pdata->dev), + msecs_to_jiffies(100)); } /* diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h new file mode 100644 index 000000000000..38e31c55adbb --- /dev/null +++ b/include/linux/mfd/tps65090.h @@ -0,0 +1,46 @@ +/* + * Core driver interface for TI TPS65090 PMIC family + * + * Copyright (C) 2012 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + */ + +#ifndef __LINUX_MFD_TPS65090_H +#define __LINUX_MFD_TPS65090_H + +struct tps65090_subdev_info { + int id; + const char *name; + void *platform_data; +}; + +struct tps65090_platform_data { + int irq_base; + int num_subdevs; + struct tps65090_subdev_info *subdevs; +}; + +/* + * NOTE: the functions below are not intended for use outside + * of the TPS65090 sub-device drivers + */ +extern int tps65090_write(struct device *dev, int reg, uint8_t val); +extern int tps65090_read(struct device *dev, int reg, uint8_t *val); +extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num); +extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num); + +#endif /*__LINUX_MFD_TPS65090_H */ diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h new file mode 100644 index 000000000000..e030ef9a64ee --- /dev/null +++ b/include/linux/mfd/tps65217.h @@ -0,0 +1,283 @@ +/* + * linux/mfd/tps65217.h + * + * Functions to access TPS65217 power management chip. + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_MFD_TPS65217_H +#define __LINUX_MFD_TPS65217_H + +#include <linux/i2c.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +/* I2C ID for TPS65217 part */ +#define TPS65217_I2C_ID 0x24 + +/* All register addresses */ +#define TPS65217_REG_CHIPID 0X00 +#define TPS65217_REG_PPATH 0X01 +#define TPS65217_REG_INT 0X02 +#define TPS65217_REG_CHGCONFIG0 0X03 +#define TPS65217_REG_CHGCONFIG1 0X04 +#define TPS65217_REG_CHGCONFIG2 0X05 +#define TPS65217_REG_CHGCONFIG3 0X06 +#define TPS65217_REG_WLEDCTRL1 0X07 +#define TPS65217_REG_WLEDCTRL2 0X08 +#define TPS65217_REG_MUXCTRL 0X09 +#define TPS65217_REG_STATUS 0X0A +#define TPS65217_REG_PASSWORD 0X0B +#define TPS65217_REG_PGOOD 0X0C +#define TPS65217_REG_DEFPG 0X0D +#define TPS65217_REG_DEFDCDC1 0X0E +#define TPS65217_REG_DEFDCDC2 0X0F +#define TPS65217_REG_DEFDCDC3 0X10 +#define TPS65217_REG_DEFSLEW 0X11 +#define TPS65217_REG_DEFLDO1 0X12 +#define TPS65217_REG_DEFLDO2 0X13 +#define TPS65217_REG_DEFLS1 0X14 +#define TPS65217_REG_DEFLS2 0X15 +#define TPS65217_REG_ENABLE 0X16 +#define TPS65217_REG_DEFUVLO 0X18 +#define TPS65217_REG_SEQ1 0X19 +#define TPS65217_REG_SEQ2 0X1A +#define TPS65217_REG_SEQ3 0X1B +#define TPS65217_REG_SEQ4 0X1C +#define TPS65217_REG_SEQ5 0X1D +#define TPS65217_REG_SEQ6 0X1E + +/* Register field definitions */ +#define TPS65217_CHIPID_CHIP_MASK 0xF0 +#define TPS65217_CHIPID_REV_MASK 0x0F + +#define TPS65217_PPATH_ACSINK_ENABLE BIT(7) +#define TPS65217_PPATH_USBSINK_ENABLE BIT(6) +#define TPS65217_PPATH_AC_PW_ENABLE BIT(5) +#define TPS65217_PPATH_USB_PW_ENABLE BIT(4) +#define TPS65217_PPATH_AC_CURRENT_MASK 0x0C +#define TPS65217_PPATH_USB_CURRENT_MASK 0x03 + +#define TPS65217_INT_PBM BIT(6) +#define TPS65217_INT_ACM BIT(5) +#define TPS65217_INT_USBM BIT(4) +#define TPS65217_INT_PBI BIT(2) +#define TPS65217_INT_ACI BIT(1) +#define TPS65217_INT_USBI BIT(0) + +#define TPS65217_CHGCONFIG0_TREG BIT(7) +#define TPS65217_CHGCONFIG0_DPPM BIT(6) +#define TPS65217_CHGCONFIG0_TSUSP BIT(5) +#define TPS65217_CHGCONFIG0_TERMI BIT(4) +#define TPS65217_CHGCONFIG0_ACTIVE BIT(3) +#define TPS65217_CHGCONFIG0_CHGTOUT BIT(2) +#define TPS65217_CHGCONFIG0_PCHGTOUT BIT(1) +#define TPS65217_CHGCONFIG0_BATTEMP BIT(0) + +#define TPS65217_CHGCONFIG1_TMR_MASK 0xC0 +#define TPS65217_CHGCONFIG1_TMR_ENABLE BIT(5) +#define TPS65217_CHGCONFIG1_NTC_TYPE BIT(4) +#define TPS65217_CHGCONFIG1_RESET BIT(3) +#define TPS65217_CHGCONFIG1_TERM BIT(2) +#define TPS65217_CHGCONFIG1_SUSP BIT(1) +#define TPS65217_CHGCONFIG1_CHG_EN BIT(0) + +#define TPS65217_CHGCONFIG2_DYNTMR BIT(7) +#define TPS65217_CHGCONFIG2_VPREGHG BIT(6) +#define TPS65217_CHGCONFIG2_VOREG_MASK 0x30 + +#define TPS65217_CHGCONFIG3_ICHRG_MASK 0xC0 +#define TPS65217_CHGCONFIG3_DPPMTH_MASK 0x30 +#define TPS65217_CHGCONFIG2_PCHRGT BIT(3) +#define TPS65217_CHGCONFIG2_TERMIF 0x06 +#define TPS65217_CHGCONFIG2_TRANGE BIT(0) + +#define TPS65217_WLEDCTRL1_ISINK_ENABLE BIT(3) +#define TPS65217_WLEDCTRL1_ISEL BIT(2) +#define TPS65217_WLEDCTRL1_FDIM_MASK 0x03 + +#define TPS65217_WLEDCTRL2_DUTY_MASK 0x7F + +#define TPS65217_MUXCTRL_MUX_MASK 0x07 + +#define TPS65217_STATUS_OFF BIT(7) +#define TPS65217_STATUS_ACPWR BIT(3) +#define TPS65217_STATUS_USBPWR BIT(2) +#define TPS65217_STATUS_PB BIT(0) + +#define TPS65217_PASSWORD_REGS_UNLOCK 0x7D + +#define TPS65217_PGOOD_LDO3_PG BIT(6) +#define TPS65217_PGOOD_LDO4_PG BIT(5) +#define TPS65217_PGOOD_DC1_PG BIT(4) +#define TPS65217_PGOOD_DC2_PG BIT(3) +#define TPS65217_PGOOD_DC3_PG BIT(2) +#define TPS65217_PGOOD_LDO1_PG BIT(1) +#define TPS65217_PGOOD_LDO2_PG BIT(0) + +#define TPS65217_DEFPG_LDO1PGM BIT(3) +#define TPS65217_DEFPG_LDO2PGM BIT(2) +#define TPS65217_DEFPG_PGDLY_MASK 0x03 + +#define TPS65217_DEFDCDCX_XADJX BIT(7) +#define TPS65217_DEFDCDCX_DCDC_MASK 0x3F + +#define TPS65217_DEFSLEW_GO BIT(7) +#define TPS65217_DEFSLEW_GODSBL BIT(6) +#define TPS65217_DEFSLEW_PFM_EN1 BIT(5) +#define TPS65217_DEFSLEW_PFM_EN2 BIT(4) +#define TPS65217_DEFSLEW_PFM_EN3 BIT(3) +#define TPS65217_DEFSLEW_SLEW_MASK 0x07 + +#define TPS65217_DEFLDO1_LDO1_MASK 0x0F + +#define TPS65217_DEFLDO2_TRACK BIT(6) +#define TPS65217_DEFLDO2_LDO2_MASK 0x3F + +#define TPS65217_DEFLDO3_LDO3_EN BIT(5) +#define TPS65217_DEFLDO3_LDO3_MASK 0x1F + +#define TPS65217_DEFLDO4_LDO4_EN BIT(5) +#define TPS65217_DEFLDO4_LDO4_MASK 0x1F + +#define TPS65217_ENABLE_LS1_EN BIT(6) +#define TPS65217_ENABLE_LS2_EN BIT(5) +#define TPS65217_ENABLE_DC1_EN BIT(4) +#define TPS65217_ENABLE_DC2_EN BIT(3) +#define TPS65217_ENABLE_DC3_EN BIT(2) +#define TPS65217_ENABLE_LDO1_EN BIT(1) +#define TPS65217_ENABLE_LDO2_EN BIT(0) + +#define TPS65217_DEFUVLO_UVLOHYS BIT(2) +#define TPS65217_DEFUVLO_UVLO_MASK 0x03 + +#define TPS65217_SEQ1_DC1_SEQ_MASK 0xF0 +#define TPS65217_SEQ1_DC2_SEQ_MASK 0x0F + +#define TPS65217_SEQ2_DC3_SEQ_MASK 0xF0 +#define TPS65217_SEQ2_LDO1_SEQ_MASK 0x0F + +#define TPS65217_SEQ3_LDO2_SEQ_MASK 0xF0 +#define TPS65217_SEQ3_LDO3_SEQ_MASK 0x0F + +#define TPS65217_SEQ4_LDO4_SEQ_MASK 0xF0 + +#define TPS65217_SEQ5_DLY1_MASK 0xC0 +#define TPS65217_SEQ5_DLY2_MASK 0x30 +#define TPS65217_SEQ5_DLY3_MASK 0x0C +#define TPS65217_SEQ5_DLY4_MASK 0x03 + +#define TPS65217_SEQ6_DLY5_MASK 0xC0 +#define TPS65217_SEQ6_DLY6_MASK 0x30 +#define TPS65217_SEQ6_SEQUP BIT(2) +#define TPS65217_SEQ6_SEQDWN BIT(1) +#define TPS65217_SEQ6_INSTDWN BIT(0) + +#define TPS65217_MAX_REGISTER 0x1E +#define TPS65217_PROTECT_NONE 0 +#define TPS65217_PROTECT_L1 1 +#define TPS65217_PROTECT_L2 2 + + +enum tps65217_regulator_id { + /* DCDC's */ + TPS65217_DCDC_1, + TPS65217_DCDC_2, + TPS65217_DCDC_3, + /* LDOs */ + TPS65217_LDO_1, + TPS65217_LDO_2, + TPS65217_LDO_3, + TPS65217_LDO_4, +}; + +#define TPS65217_MAX_REG_ID TPS65217_LDO_4 + +/* Number of step-down converters available */ +#define TPS65217_NUM_DCDC 3 +/* Number of LDO voltage regulators available */ +#define TPS65217_NUM_LDO 4 +/* Number of total regulators available */ +#define TPS65217_NUM_REGULATOR (TPS65217_NUM_DCDC + TPS65217_NUM_LDO) + +/** + * struct tps65217_board - packages regulator init data + * @tps65217_regulator_data: regulator initialization values + * + * Board data may be used to initialize regulator. + */ +struct tps65217_board { + struct regulator_init_data *tps65217_init_data; +}; + +/** + * struct tps_info - packages regulator constraints + * @name: Voltage regulator name + * @min_uV: minimum micro volts + * @max_uV: minimum micro volts + * @vsel_to_uv: Function pointer to get voltage from selector + * @uv_to_vsel: Function pointer to get selector from voltage + * @table: Table for non-uniform voltage step-size + * @table_len: Length of the voltage table + * @enable_mask: Regulator enable mask bits + * @set_vout_reg: Regulator output voltage set register + * @set_vout_mask: Regulator output voltage set mask + * + * This data is used to check the regualtor voltage limits while setting. + */ +struct tps_info { + const char *name; + int min_uV; + int max_uV; + int (*vsel_to_uv)(unsigned int vsel); + int (*uv_to_vsel)(int uV, unsigned int *vsel); + const int *table; + unsigned int table_len; + unsigned int enable_mask; + unsigned int set_vout_reg; + unsigned int set_vout_mask; +}; + +/** + * struct tps65217 - tps65217 sub-driver chip access routines + * + * Device data may be used to access the TPS65217 chip + */ + +struct tps65217 { + struct device *dev; + struct tps65217_board *pdata; + struct regulator_desc desc[TPS65217_NUM_REGULATOR]; + struct regulator_dev *rdev[TPS65217_NUM_REGULATOR]; + struct tps_info *info[TPS65217_NUM_REGULATOR]; + struct regmap *regmap; + + /* Client devices */ + struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR]; +}; + +static inline struct tps65217 *dev_to_tps65217(struct device *dev) +{ + return dev_get_drvdata(dev); +} + +int tps65217_reg_read(struct tps65217 *tps, unsigned int reg, + unsigned int *val); +int tps65217_reg_write(struct tps65217 *tps, unsigned int reg, + unsigned int val, unsigned int level); +int tps65217_set_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level); +int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int level); + +#endif /* __LINUX_MFD_TPS65217_H */ diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 76700b5eee92..1c6c2860d1a6 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -17,6 +17,8 @@ #ifndef __LINUX_MFD_TPS65910_H #define __LINUX_MFD_TPS65910_H +#include <linux/gpio.h> + /* TPS chip id list */ #define TPS65910 0 #define TPS65911 1 @@ -657,6 +659,8 @@ /*Register GPIO (0x80) register.RegisterDescription */ +#define GPIO_SLEEP_MASK 0x80 +#define GPIO_SLEEP_SHIFT 7 #define GPIO_DEB_MASK 0x10 #define GPIO_DEB_SHIFT 4 #define GPIO_PUEN_MASK 0x08 @@ -740,6 +744,11 @@ #define TPS65910_GPIO_STS BIT(1) #define TPS65910_GPIO_SET BIT(0) +/* Max number of TPS65910/11 GPIOs */ +#define TPS65910_NUM_GPIO 6 +#define TPS65911_NUM_GPIO 9 +#define TPS6591X_MAX_NUM_GPIO 9 + /* Regulator Index Definitions */ #define TPS65910_REG_VRTC 0 #define TPS65910_REG_VIO 1 @@ -785,6 +794,7 @@ struct tps65910_board { int irq_base; int vmbch_threshold; int vmbch2_threshold; + bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO]; unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS]; struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS]; }; @@ -796,6 +806,7 @@ struct tps65910_board { struct tps65910 { struct device *dev; struct i2c_client *i2c_client; + struct regmap *regmap; struct mutex io_mutex; unsigned int id; int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest); diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index 4321f044d1e4..28af41756360 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -12,7 +12,7 @@ #include <linux/mfd/mcp.h> #include <linux/gpio.h> -#include <linux/semaphore.h> +#include <linux/mutex.h> #define UCB_IO_DATA 0x00 #define UCB_IO_DIR 0x01 @@ -104,17 +104,27 @@ #define UCB_MODE_DYN_VFLAG_ENA (1 << 12) #define UCB_MODE_AUD_OFF_CAN (1 << 13) +enum ucb1x00_reset { + UCB_RST_PROBE, + UCB_RST_RESUME, + UCB_RST_SUSPEND, + UCB_RST_REMOVE, + UCB_RST_PROBE_FAIL, +}; -struct ucb1x00_irq { - void *devid; - void (*fn)(int, void *); +struct ucb1x00_plat_data { + void (*reset)(enum ucb1x00_reset); + unsigned irq_base; + int gpio_base; + unsigned can_wakeup; }; struct ucb1x00 { - spinlock_t lock; + raw_spinlock_t irq_lock; struct mcp *mcp; unsigned int irq; - struct semaphore adc_sem; + int irq_base; + struct mutex adc_mutex; spinlock_t io_lock; u16 id; u16 io_dir; @@ -122,7 +132,8 @@ struct ucb1x00 { u16 adc_cr; u16 irq_fal_enbl; u16 irq_ris_enbl; - struct ucb1x00_irq irq_handler[16]; + u16 irq_mask; + u16 irq_wake; struct device dev; struct list_head node; struct list_head devs; @@ -144,7 +155,7 @@ struct ucb1x00_driver { struct list_head devs; int (*add)(struct ucb1x00_dev *dev); void (*remove)(struct ucb1x00_dev *dev); - int (*suspend)(struct ucb1x00_dev *dev, pm_message_t state); + int (*suspend)(struct ucb1x00_dev *dev); int (*resume)(struct ucb1x00_dev *dev); }; @@ -245,15 +256,4 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync); void ucb1x00_adc_enable(struct ucb1x00 *ucb); void ucb1x00_adc_disable(struct ucb1x00 *ucb); -/* - * Which edges of the IRQ do you want to control today? - */ -#define UCB_RISING (1 << 0) -#define UCB_FALLING (1 << 1) - -int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid); -void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid); - #endif diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 3fb1f407d5e6..893267bb6229 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -22,7 +22,6 @@ struct wm8994_ldo_pdata { /** GPIOs to enable regulator, 0 or less if not available */ int enable; - const char *supply; const struct regulator_init_data *init_data; }; @@ -185,6 +184,9 @@ struct wm8994_pdata { unsigned int jd_scthr:2; unsigned int jd_thr:2; + /* Configure WM1811 jack detection for use with external capacitor */ + unsigned int jd_ext_cap:1; + /* WM8958 microphone bias configuration */ int micbias[2]; diff --git a/include/linux/migrate.h b/include/linux/migrate.h index 05ed2828a553..855c337b20c3 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -8,7 +8,6 @@ typedef struct page *new_page_t(struct page *, unsigned long private, int **); #ifdef CONFIG_MIGRATION -#define PAGE_MIGRATION 1 extern void putback_lru_pages(struct list_head *l); extern int migrate_page(struct address_space *, @@ -32,7 +31,6 @@ extern void migrate_page_copy(struct page *newpage, struct page *page); extern int migrate_huge_page_move_mapping(struct address_space *mapping, struct page *newpage, struct page *page); #else -#define PAGE_MIGRATION 0 static inline void putback_lru_pages(struct list_head *l) {} static inline int migrate_pages(struct list_head *l, new_page_t x, diff --git a/include/linux/mlx4/driver.h b/include/linux/mlx4/driver.h index e1eebf78caba..5f1298b1b5ef 100644 --- a/include/linux/mlx4/driver.h +++ b/include/linux/mlx4/driver.h @@ -33,7 +33,6 @@ #ifndef MLX4_DRIVER_H #define MLX4_DRIVER_H -#include <linux/device.h> #include <linux/mlx4/device.h> struct mlx4_dev; diff --git a/include/linux/mm.h b/include/linux/mm.h index 17b27cd269c4..d8738a464b94 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -6,6 +6,7 @@ #ifdef __KERNEL__ #include <linux/gfp.h> +#include <linux/bug.h> #include <linux/list.h> #include <linux/mmzone.h> #include <linux/rbtree.h> @@ -111,7 +112,7 @@ extern unsigned int kobjsize(const void *objp); #define VM_HUGEPAGE 0x01000000 /* MADV_HUGEPAGE marked this vma */ #endif #define VM_INSERTPAGE 0x02000000 /* The vma has had "vm_insert_page()" done on it */ -#define VM_ALWAYSDUMP 0x04000000 /* Always include in core dumps */ +#define VM_NODUMP 0x04000000 /* Do not include in the core dump */ #define VM_CAN_NONLINEAR 0x08000000 /* Has ->fault & does nonlinear pages */ #define VM_MIXEDMAP 0x10000000 /* Can contain "struct page" and pure PFN pages */ @@ -893,9 +894,9 @@ struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr, int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address, unsigned long size); -unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address, +void zap_page_range(struct vm_area_struct *vma, unsigned long address, unsigned long size, struct zap_details *); -unsigned long unmap_vmas(struct mmu_gather *tlb, +void unmap_vmas(struct mmu_gather *tlb, struct vm_area_struct *start_vma, unsigned long start_addr, unsigned long end_addr, unsigned long *nr_accounted, struct zap_details *); @@ -953,7 +954,7 @@ extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new); extern void truncate_setsize(struct inode *inode, loff_t newsize); extern int vmtruncate(struct inode *inode, loff_t offset); extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end); - +void truncate_pagecache_range(struct inode *inode, loff_t offset, loff_t end); int truncate_inode_page(struct address_space *mapping, struct page *page); int generic_error_remove_page(struct address_space *mapping, struct page *page); @@ -1040,6 +1041,9 @@ static inline int stack_guard_page_end(struct vm_area_struct *vma, !vma_growsup(vma->vm_next, addr); } +extern pid_t +vm_is_stack(struct task_struct *task, struct vm_area_struct *vma, int in_group); + extern unsigned long move_page_tables(struct vm_area_struct *vma, unsigned long old_addr, struct vm_area_struct *new_vma, unsigned long new_addr, unsigned long len); @@ -1058,19 +1062,20 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write, /* * per-process(per-mm_struct) statistics. */ -static inline void set_mm_counter(struct mm_struct *mm, int member, long value) -{ - atomic_long_set(&mm->rss_stat.count[member], value); -} - -#if defined(SPLIT_RSS_COUNTING) -unsigned long get_mm_counter(struct mm_struct *mm, int member); -#else static inline unsigned long get_mm_counter(struct mm_struct *mm, int member) { - return atomic_long_read(&mm->rss_stat.count[member]); -} + long val = atomic_long_read(&mm->rss_stat.count[member]); + +#ifdef SPLIT_RSS_COUNTING + /* + * counter is updated in asynchronous manner and may go to minus. + * But it's never be expected number for users. + */ + if (val < 0) + val = 0; #endif + return (unsigned long)val; +} static inline void add_mm_counter(struct mm_struct *mm, int member, long value) { @@ -1127,9 +1132,9 @@ static inline void setmax_mm_hiwater_rss(unsigned long *maxrss, } #if defined(SPLIT_RSS_COUNTING) -void sync_mm_rss(struct task_struct *task, struct mm_struct *mm); +void sync_mm_rss(struct mm_struct *mm); #else -static inline void sync_mm_rss(struct task_struct *task, struct mm_struct *mm) +static inline void sync_mm_rss(struct mm_struct *mm) { } #endif @@ -1253,6 +1258,8 @@ static inline void pgtable_page_dtor(struct page *page) extern void free_area_init(unsigned long * zones_size); extern void free_area_init_node(int nid, unsigned long * zones_size, unsigned long zone_start_pfn, unsigned long *zholes_size); +extern void free_initmem(void); + #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP /* * With CONFIG_HAVE_MEMBLOCK_NODE_MAP set, an architecture may initialise its @@ -1291,8 +1298,6 @@ extern void get_pfn_range_for_nid(unsigned int nid, extern unsigned long find_min_pfn_with_active_regions(void); extern void free_bootmem_with_active_regions(int nid, unsigned long max_low_pfn); -int add_from_early_node_map(struct range *range, int az, - int nr_range, int nid); extern void sparse_memory_present_with_active_regions(int nid); #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */ @@ -1598,9 +1603,9 @@ void vmemmap_populate_print_last(void); enum mf_flags { MF_COUNT_INCREASED = 1 << 0, + MF_ACTION_REQUIRED = 1 << 1, }; -extern void memory_failure(unsigned long pfn, int trapno); -extern int __memory_failure(unsigned long pfn, int trapno, int flags); +extern int memory_failure(unsigned long pfn, int trapno, int flags); extern void memory_failure_queue(unsigned long pfn, int trapno, int flags); extern int unpoison_memory(unsigned long pfn); extern int sysctl_memory_failure_early_kill; diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 19a41d1737af..01beae78f079 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -10,6 +10,7 @@ #ifndef LINUX_MMC_CARD_H #define LINUX_MMC_CARD_H +#include <linux/device.h> #include <linux/mmc/core.h> #include <linux/mod_devicetable.h> @@ -71,6 +72,8 @@ struct mmc_ext_csd { bool hpi_en; /* HPI enablebit */ bool hpi; /* HPI support bit */ unsigned int hpi_cmd; /* cmd used as HPI */ + unsigned int data_sector_size; /* 512 bytes or 4KB */ + unsigned int data_tag_unit_size; /* DATA TAG UNIT size */ unsigned int boot_ro_lock; /* ro lock support */ bool boot_ro_lockable; u8 raw_partition_support; /* 160 */ diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h index a8e469783318..cefaba038ccb 100644 --- a/include/linux/mmc/cd-gpio.h +++ b/include/linux/mmc/cd-gpio.h @@ -12,8 +12,7 @@ #define MMC_CD_GPIO_H struct mmc_host; -int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, - unsigned int irq, unsigned long flags); +int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio); void mmc_cd_gpio_free(struct mmc_host *host); #endif diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 87a976cc5654..1b431c728b9a 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -9,7 +9,7 @@ #define LINUX_MMC_CORE_H #include <linux/interrupt.h> -#include <linux/device.h> +#include <linux/completion.h> struct request; struct mmc_data; @@ -175,7 +175,6 @@ extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int); extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort); extern void mmc_release_host(struct mmc_host *host); -extern void mmc_do_release_host(struct mmc_host *host); extern int mmc_try_claim_host(struct mmc_host *host); extern int mmc_flush_cache(struct mmc_card *); diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index aae5d1f1bb39..8f66e28f5a0f 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -76,7 +76,7 @@ struct mmc_data; * @num_slots: Number of slots available. * @verid: Denote Version ID. * @data_offset: Set the offset of DATA register according to VERID. - * @pdev: Platform device associated with the MMC controller. + * @dev: Device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. * @slot: Slots sharing this MMC controller. * @fifo_depth: depth of FIFO. @@ -87,6 +87,8 @@ struct mmc_data; * @push_data: Pointer to FIFO push function. * @pull_data: Pointer to FIFO pull function. * @quirks: Set of quirks that apply to specific versions of the IP. + * @irq_flags: The flags to be passed to request_irq. + * @irq: The irq value to be passed to request_irq. * * Locking * ======= @@ -153,7 +155,7 @@ struct dw_mci { u32 fifoth_val; u16 verid; u16 data_offset; - struct platform_device *pdev; + struct device dev; struct dw_mci_board *pdata; struct dw_mci_slot *slot[MAX_MCI_SLOTS]; @@ -174,6 +176,8 @@ struct dw_mci { u32 quirks; struct regulator *vmmc; /* Power regulator */ + unsigned long irq_flags; /* IRQ flags */ + unsigned int irq; }; /* DMA ops for Internal/External DMAC interface */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index ee2b0363c040..cbde4b7e675e 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -12,6 +12,7 @@ #include <linux/leds.h> #include <linux/sched.h> +#include <linux/device.h> #include <linux/fault-inject.h> #include <linux/mmc/core.h> @@ -80,34 +81,11 @@ struct mmc_ios { struct mmc_host_ops { /* - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. 'enable' is called - * when the host is claimed and 'disable' is called (or scheduled with - * a delay) when the host is released. The 'disable' is scheduled if - * the disable delay set by 'mmc_set_disable_delay()' is non-zero, - * otherwise 'disable' is called immediately. 'disable' may be - * scheduled repeatedly, to permit ever greater power saving at the - * expense of ever greater latency to re-enable. Rescheduling is - * determined by the return value of the 'disable' method. A positive - * value gives the delay in milliseconds. - * - * In the case where a host function (like set_ios) may be called - * with or without the host claimed, enabling and disabling can be - * done directly and will nest correctly. Call 'mmc_host_enable()' and - * 'mmc_host_lazy_disable()' for this purpose, but note that these - * functions must be paired. - * - * Alternatively, 'mmc_host_enable()' may be paired with - * 'mmc_host_disable()' which calls 'disable' immediately. In this - * case the 'disable' method will be called with 'lazy' set to 0. - * This is mainly useful for error paths. - * - * Because lazy disable may be called from a work queue, the 'disable' - * method must claim the host when 'lazy' != 0, which will work - * correctly because recursion is detected and handled. + * 'enable' is called when the host is claimed and 'disable' is called + * when the host is released. 'enable' and 'disable' are deprecated. */ int (*enable)(struct mmc_host *host); - int (*disable)(struct mmc_host *host, int lazy); + int (*disable)(struct mmc_host *host); /* * It is optional for the host to implement pre_req and post_req in * order to support double buffering of requests (prepare one @@ -218,7 +196,7 @@ struct mmc_host { #define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ #define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ -#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */ + #define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ #define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ #define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */ @@ -258,6 +236,8 @@ struct mmc_host { #define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ MMC_CAP2_HS200_1_2V_SDR) #define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ +#define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* On I/O err check card removal */ +#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; @@ -300,13 +280,7 @@ struct mmc_host { unsigned int removed:1; /* host is being removed */ #endif - /* Only used with MMC_CAP_DISABLE */ - int enabled; /* host is enabled */ int rescan_disable; /* disable card detection */ - int nesting_cnt; /* "enable" nesting count */ - int en_dis_recurs; /* detect recursion */ - unsigned int disable_delay; /* disable delay in msecs */ - struct delayed_work disable; /* disabling work */ struct mmc_card *card; /* device attached to this host */ @@ -406,17 +380,8 @@ int mmc_card_awake(struct mmc_host *host); int mmc_card_sleep(struct mmc_host *host); int mmc_card_can_sleep(struct mmc_host *host); -int mmc_host_enable(struct mmc_host *host); -int mmc_host_disable(struct mmc_host *host); -int mmc_host_lazy_disable(struct mmc_host *host); int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *); -static inline void mmc_set_disable_delay(struct mmc_host *host, - unsigned int disable_delay) -{ - host->disable_delay = disable_delay; -} - /* Module parameter */ extern bool mmc_assume_removable; diff --git a/include/linux/mmc/ioctl.h b/include/linux/mmc/ioctl.h index 8fa5bc5f8059..1f5e68923929 100644 --- a/include/linux/mmc/ioctl.h +++ b/include/linux/mmc/ioctl.h @@ -1,5 +1,8 @@ #ifndef LINUX_MMC_IOCTL_H #define LINUX_MMC_IOCTL_H + +#include <linux/types.h> + struct mmc_ioc_cmd { /* Implies direction of data. true = write, false = read */ int write_flag; diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index fb9f6e116e1c..b822a2cb6008 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -274,6 +274,7 @@ struct _mmc_csd { #define EXT_CSD_FLUSH_CACHE 32 /* W */ #define EXT_CSD_CACHE_CTRL 33 /* R/W */ #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ +#define EXT_CSD_DATA_SECTOR_SIZE 61 /* R */ #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ @@ -315,6 +316,8 @@ struct _mmc_csd { #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ +#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ #define EXT_CSD_HPI_FEATURES 503 /* RO */ /* diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index c750f85177d9..e9051e1cb1ce 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -90,6 +90,8 @@ struct sdhci_host { unsigned int quirks2; /* More deviations from spec. */ +#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) + int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 04ff452bf5c3..05f0e3db1c12 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -77,18 +77,15 @@ struct sh_mmcif_plat_data { /* CE_CLK_CTRL */ #define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ -#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define CLKDIV_4 (1<<16) /* mmc clock frequency. - * n: bus clock/(2^(n+1)) */ -#define CLKDIV_256 (7<<16) /* mmc clock frequency. (see above) */ -#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ -#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ - (1 << 9) | (1 << 8)) /* resp busy timeout */ -#define SRWDTO_29 ((1 << 7) | (1 << 6) | \ - (1 << 5) | (1 << 4)) /* read/write timeout */ -#define SCCSTO_29 ((1 << 3) | (1 << 2) | \ - (1 << 1) | (1 << 0)) /* ccs timeout */ +#define CLK_CLEAR (0xf << 16) +#define CLK_SUP_PCLK (0xf << 16) +#define CLKDIV_4 (1 << 16) /* mmc clock frequency. + * n: bus clock/(2^(n+1)) */ +#define CLKDIV_256 (7 << 16) /* mmc clock frequency. (see above) */ +#define SRSPTO_256 (2 << 12) /* resp timeout */ +#define SRBSYTO_29 (0xf << 8) /* resp busy timeout */ +#define SRWDTO_29 (0xf << 4) /* read/write timeout */ +#define SCCSTO_29 (0xf << 0) /* ccs timeout */ /* CE_VERSION */ #define SOFT_RST_ON (1 << 31) diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index 71b805451bd8..e94e620aeddc 100644 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -10,15 +10,29 @@ struct tmio_mmc_data; #define SH_MOBILE_SDHI_IRQ_SDCARD "sdcard" #define SH_MOBILE_SDHI_IRQ_SDIO "sdio" +/** + * struct sh_mobile_sdhi_ops - SDHI driver callbacks + * @cd_wakeup: trigger a card-detection run + */ +struct sh_mobile_sdhi_ops { + void (*cd_wakeup)(const struct platform_device *pdev); +}; + struct sh_mobile_sdhi_info { int dma_slave_tx; int dma_slave_rx; unsigned long tmio_flags; unsigned long tmio_caps; u32 tmio_ocr_mask; /* available MMC voltages */ + unsigned int cd_gpio; struct tmio_mmc_data *pdata; void (*set_pwr)(struct platform_device *pdev, int state); int (*get_cd)(struct platform_device *pdev); + + /* callbacks for board specific setup code */ + int (*init)(struct platform_device *pdev, + const struct sh_mobile_sdhi_ops *ops); + void (*cleanup)(struct platform_device *pdev); }; #endif /* LINUX_MMC_SH_MOBILE_SDHI_H */ diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 650ba2fb3301..dff711509661 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -365,6 +365,7 @@ struct zone { */ unsigned int compact_considered; unsigned int compact_defer_shift; + int compact_order_failed; #endif ZONE_PADDING(_pad1_) diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index fb69ad191ad7..501da4cb8a6d 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -414,6 +414,15 @@ struct hv_vmbus_device_id { __attribute__((aligned(sizeof(kernel_ulong_t)))); }; +/* rpmsg */ + +#define RPMSG_NAME_SIZE 32 +#define RPMSG_DEVICE_MODALIAS_FMT "rpmsg:%s" + +struct rpmsg_device_id { + char name[RPMSG_NAME_SIZE]; +}; + /* i2c */ #define I2C_NAME_SIZE 20 diff --git a/include/linux/module.h b/include/linux/module.h index 4598bf03e98b..fbcafe2ee13e 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -21,8 +21,6 @@ #include <linux/percpu.h> #include <asm/module.h> -#include <trace/events/module.h> - /* Not Yet Implemented */ #define MODULE_SUPPORTED_DEVICE(name) @@ -452,33 +450,11 @@ void symbol_put_addr(void *addr); /* Sometimes we know we already have a refcount, and it's easier not to handle the error case (which only happens with rmmod --wait). */ -static inline void __module_get(struct module *module) -{ - if (module) { - preempt_disable(); - __this_cpu_inc(module->refptr->incs); - trace_module_get(module, _THIS_IP_); - preempt_enable(); - } -} - -static inline int try_module_get(struct module *module) -{ - int ret = 1; - - if (module) { - preempt_disable(); +extern void __module_get(struct module *module); - if (likely(module_is_live(module))) { - __this_cpu_inc(module->refptr->incs); - trace_module_get(module, _THIS_IP_); - } else - ret = 0; - - preempt_enable(); - } - return ret; -} +/* This is the Right Way to get a module: if it fails, it's being removed, + * so pretend it's not there. */ +extern bool try_module_get(struct module *module); extern void module_put(struct module *module); diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index c47f4d60db0b..ea36486378d8 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -47,14 +47,11 @@ struct kernel_param_ops { void (*free)(void *arg); }; -/* Flag bits for kernel_param.flags */ -#define KPARAM_ISBOOL 2 - struct kernel_param { const char *name; const struct kernel_param_ops *ops; u16 perm; - u16 flags; + s16 level; union { void *arg; const struct kparam_string *str; @@ -131,8 +128,40 @@ struct kparam_array * The ops can have NULL set or get functions. */ #define module_param_cb(name, ops, arg, perm) \ - __module_param_call(MODULE_PARAM_PREFIX, \ - name, ops, arg, __same_type((arg), bool *), perm) + __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, 0) + +/** + * <level>_param_cb - general callback for a module/cmdline parameter + * to be evaluated before certain initcall level + * @name: a valid C identifier which is the parameter name. + * @ops: the set & get operations for this parameter. + * @perm: visibility in sysfs. + * + * The ops can have NULL set or get functions. + */ +#define __level_param_cb(name, ops, arg, perm, level) \ + __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, level) + +#define core_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 1) + +#define postcore_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 2) + +#define arch_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 3) + +#define subsys_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 4) + +#define fs_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 5) + +#define device_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 6) + +#define late_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 7) /* On alpha, ia64 and ppc64 relocations to global data cannot go into read-only sections (which is part of respective UNIX ABI on these @@ -146,7 +175,7 @@ struct kparam_array /* This is the fundamental function for registering boot/module parameters. */ -#define __module_param_call(prefix, name, ops, arg, isbool, perm) \ +#define __module_param_call(prefix, name, ops, arg, perm, level) \ /* Default value instead of permissions? */ \ static int __param_perm_check_##name __attribute__((unused)) = \ BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2)) \ @@ -155,8 +184,7 @@ struct kparam_array static struct kernel_param __moduleparam_const __param_##name \ __used \ __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \ - = { __param_str_##name, ops, perm, isbool ? KPARAM_ISBOOL : 0, \ - { arg } } + = { __param_str_##name, ops, perm, level, { arg } } /* Obsolete - use module_param_cb() */ #define module_param_call(name, set, get, arg, perm) \ @@ -164,8 +192,7 @@ struct kparam_array { (void *)set, (void *)get }; \ __module_param_call(MODULE_PARAM_PREFIX, \ name, &__param_ops_##name, arg, \ - __same_type(arg, bool *), \ - (perm) + sizeof(__check_old_set_param(set))*0) + (perm) + sizeof(__check_old_set_param(set))*0, 0) /* We don't get oldget: it's often a new-style param_get_uint, etc. */ static inline int @@ -245,8 +272,7 @@ static inline void __kernel_param_unlock(void) */ #define core_param(name, var, type, perm) \ param_check_##type(name, &(var)); \ - __module_param_call("", name, ¶m_ops_##type, \ - &var, __same_type(var, bool), perm) + __module_param_call("", name, ¶m_ops_##type, &var, perm, 0) #endif /* !MODULE */ /** @@ -264,7 +290,7 @@ static inline void __kernel_param_unlock(void) = { len, string }; \ __module_param_call(MODULE_PARAM_PREFIX, name, \ ¶m_ops_string, \ - .str = &__param_string_##name, 0, perm); \ + .str = &__param_string_##name, perm, 0); \ __MODULE_PARM_TYPE(name, "string") /** @@ -292,6 +318,8 @@ extern int parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, + s16 level_min, + s16 level_max, int (*unknown)(char *param, char *val)); /* Called by module remove. */ @@ -403,7 +431,7 @@ extern int param_set_bint(const char *val, const struct kernel_param *kp); __module_param_call(MODULE_PARAM_PREFIX, name, \ ¶m_array_ops, \ .arr = &__param_arr_##name, \ - __same_type(array[0], bool), perm); \ + perm, 0); \ __MODULE_PARM_TYPE(name, "array of " #type) extern struct kernel_param_ops param_array_ops; diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index c4eec228eef9..650ef352f045 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -112,6 +112,11 @@ struct nand_bbt_descr { #define NAND_BBT_USE_FLASH 0x00020000 /* Do not store flash based bad block table in OOB area; store it in-band */ #define NAND_BBT_NO_OOB 0x00040000 +/* + * Do not write new bad block markers to OOB; useful, e.g., when ECC covers + * entire spare area. Must be used with NAND_BBT_USE_FLASH. + */ +#define NAND_BBT_NO_OOB_BBM 0x00080000 /* * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index 1bbd9f289245..ed270bd2e4df 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -47,6 +47,7 @@ struct mtd_blktrans_dev { struct request_queue *rq; spinlock_t queue_lock; void *priv; + fmode_t file_mode; }; struct mtd_blktrans_ops { diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index d5d2ec6494bb..37ef6b194089 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/types.h> +#include <linux/bug.h> #include <linux/interrupt.h> #include <linux/mtd/flashchip.h> #include <linux/mtd/map.h> diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index 6987995ad3cf..b20029221fb1 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -26,95 +26,83 @@ #define FSMC_NAND_BW8 1 #define FSMC_NAND_BW16 2 -/* - * The placement of the Command Latch Enable (CLE) and - * Address Latch Enable (ALE) is twisted around in the - * SPEAR310 implementation. - */ -#if defined(CONFIG_MACH_SPEAR310) -#define PLAT_NAND_CLE (1 << 17) -#define PLAT_NAND_ALE (1 << 16) -#else -#define PLAT_NAND_CLE (1 << 16) -#define PLAT_NAND_ALE (1 << 17) -#endif - #define FSMC_MAX_NOR_BANKS 4 #define FSMC_MAX_NAND_BANKS 4 #define FSMC_FLASH_WIDTH8 1 #define FSMC_FLASH_WIDTH16 2 -struct fsmc_nor_bank_regs { - uint32_t ctrl; - uint32_t ctrl_tim; -}; - -/* ctrl register definitions */ -#define BANK_ENABLE (1 << 0) -#define MUXED (1 << 1) -#define NOR_DEV (2 << 2) -#define WIDTH_8 (0 << 4) -#define WIDTH_16 (1 << 4) -#define RSTPWRDWN (1 << 6) -#define WPROT (1 << 7) -#define WRT_ENABLE (1 << 12) -#define WAIT_ENB (1 << 13) - -/* ctrl_tim register definitions */ - -struct fsmc_nand_bank_regs { - uint32_t pc; - uint32_t sts; - uint32_t comm; - uint32_t attrib; - uint32_t ioata; - uint32_t ecc1; - uint32_t ecc2; - uint32_t ecc3; -}; - +/* fsmc controller registers for NOR flash */ +#define CTRL 0x0 + /* ctrl register definitions */ + #define BANK_ENABLE (1 << 0) + #define MUXED (1 << 1) + #define NOR_DEV (2 << 2) + #define WIDTH_8 (0 << 4) + #define WIDTH_16 (1 << 4) + #define RSTPWRDWN (1 << 6) + #define WPROT (1 << 7) + #define WRT_ENABLE (1 << 12) + #define WAIT_ENB (1 << 13) + +#define CTRL_TIM 0x4 + /* ctrl_tim register definitions */ + +#define FSMC_NOR_BANK_SZ 0x8 #define FSMC_NOR_REG_SIZE 0x40 -struct fsmc_regs { - struct fsmc_nor_bank_regs nor_bank_regs[FSMC_MAX_NOR_BANKS]; - uint8_t reserved_1[0x40 - 0x20]; - struct fsmc_nand_bank_regs bank_regs[FSMC_MAX_NAND_BANKS]; - uint8_t reserved_2[0xfe0 - 0xc0]; - uint32_t peripid0; /* 0xfe0 */ - uint32_t peripid1; /* 0xfe4 */ - uint32_t peripid2; /* 0xfe8 */ - uint32_t peripid3; /* 0xfec */ - uint32_t pcellid0; /* 0xff0 */ - uint32_t pcellid1; /* 0xff4 */ - uint32_t pcellid2; /* 0xff8 */ - uint32_t pcellid3; /* 0xffc */ -}; +#define FSMC_NOR_REG(base, bank, reg) (base + \ + FSMC_NOR_BANK_SZ * (bank) + \ + reg) + +/* fsmc controller registers for NAND flash */ +#define PC 0x00 + /* pc register definitions */ + #define FSMC_RESET (1 << 0) + #define FSMC_WAITON (1 << 1) + #define FSMC_ENABLE (1 << 2) + #define FSMC_DEVTYPE_NAND (1 << 3) + #define FSMC_DEVWID_8 (0 << 4) + #define FSMC_DEVWID_16 (1 << 4) + #define FSMC_ECCEN (1 << 6) + #define FSMC_ECCPLEN_512 (0 << 7) + #define FSMC_ECCPLEN_256 (1 << 7) + #define FSMC_TCLR_1 (1) + #define FSMC_TCLR_SHIFT (9) + #define FSMC_TCLR_MASK (0xF) + #define FSMC_TAR_1 (1) + #define FSMC_TAR_SHIFT (13) + #define FSMC_TAR_MASK (0xF) +#define STS 0x04 + /* sts register definitions */ + #define FSMC_CODE_RDY (1 << 15) +#define COMM 0x08 + /* comm register definitions */ + #define FSMC_TSET_0 0 + #define FSMC_TSET_SHIFT 0 + #define FSMC_TSET_MASK 0xFF + #define FSMC_TWAIT_6 6 + #define FSMC_TWAIT_SHIFT 8 + #define FSMC_TWAIT_MASK 0xFF + #define FSMC_THOLD_4 4 + #define FSMC_THOLD_SHIFT 16 + #define FSMC_THOLD_MASK 0xFF + #define FSMC_THIZ_1 1 + #define FSMC_THIZ_SHIFT 24 + #define FSMC_THIZ_MASK 0xFF +#define ATTRIB 0x0C +#define IOATA 0x10 +#define ECC1 0x14 +#define ECC2 0x18 +#define ECC3 0x1C +#define FSMC_NAND_BANK_SZ 0x20 + +#define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \ + (FSMC_NAND_BANK_SZ * (bank)) + \ + reg) #define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ) -/* pc register definitions */ -#define FSMC_RESET (1 << 0) -#define FSMC_WAITON (1 << 1) -#define FSMC_ENABLE (1 << 2) -#define FSMC_DEVTYPE_NAND (1 << 3) -#define FSMC_DEVWID_8 (0 << 4) -#define FSMC_DEVWID_16 (1 << 4) -#define FSMC_ECCEN (1 << 6) -#define FSMC_ECCPLEN_512 (0 << 7) -#define FSMC_ECCPLEN_256 (1 << 7) -#define FSMC_TCLR_1 (1 << 9) -#define FSMC_TAR_1 (1 << 13) - -/* sts register definitions */ -#define FSMC_CODE_RDY (1 << 15) - -/* comm register definitions */ -#define FSMC_TSET_0 (0 << 0) -#define FSMC_TWAIT_6 (6 << 8) -#define FSMC_THOLD_4 (4 << 16) -#define FSMC_THIZ_1 (1 << 24) - /* * There are 13 bytes of ecc for every 512 byte block in FSMC version 8 * and it has to be read consecutively and immediately after the 512 @@ -133,6 +121,20 @@ struct fsmc_eccplace { struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES]; }; +struct fsmc_nand_timings { + uint8_t tclr; + uint8_t tar; + uint8_t thiz; + uint8_t thold; + uint8_t twait; + uint8_t tset; +}; + +enum access_mode { + USE_DMA_ACCESS = 1, + USE_WORD_ACCESS, +}; + /** * fsmc_nand_platform_data - platform specific NAND controller config * @partitions: partition table for the platform, use a default fallback @@ -146,12 +148,23 @@ struct fsmc_eccplace { * this may be set to NULL */ struct fsmc_nand_platform_data { + struct fsmc_nand_timings *nand_timings; struct mtd_partition *partitions; unsigned int nr_partitions; unsigned int options; unsigned int width; unsigned int bank; + + /* CLE, ALE offsets */ + unsigned int cle_off; + unsigned int ale_off; + enum access_mode mode; + void (*select_bank)(uint32_t bank, uint32_t busw); + + /* priv structures for dma accesses */ + void *read_dma_priv; + void *write_dma_priv; }; extern int __init fsmc_nor_init(struct platform_device *pdev, diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 94e924e2ecd5..3595a0236b0f 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -29,8 +29,8 @@ #include <linux/kernel.h> #include <asm/unaligned.h> -#include <asm/system.h> #include <asm/io.h> +#include <asm/barrier.h> #ifdef CONFIG_MTD_MAP_BANK_WIDTH_1 #define map_bankwidth(map) 1 diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index d43dc25af82e..cf5ea8cdcf8e 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -164,6 +164,9 @@ struct mtd_info { /* ECC layout structure pointer - read only! */ struct nand_ecclayout *ecclayout; + /* max number of correctible bit errors per writesize */ + unsigned int ecc_strength; + /* Data for variable erase regions. If numeraseregions is zero, * it means that the whole device has erasesize as given above. */ @@ -174,52 +177,52 @@ struct mtd_info { * Do not call via these pointers, use corresponding mtd_*() * wrappers instead. */ - int (*erase) (struct mtd_info *mtd, struct erase_info *instr); - int (*point) (struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, void **virt, resource_size_t *phys); - void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len); - unsigned long (*get_unmapped_area) (struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags); - int (*read) (struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); - int (*write) (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); - int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); - int (*read_oob) (struct mtd_info *mtd, loff_t from, - struct mtd_oob_ops *ops); - int (*write_oob) (struct mtd_info *mtd, loff_t to, + int (*_erase) (struct mtd_info *mtd, struct erase_info *instr); + int (*_point) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); + int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); + unsigned long (*_get_unmapped_area) (struct mtd_info *mtd, + unsigned long len, + unsigned long offset, + unsigned long flags); + int (*_read) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); + int (*_write) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); + int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); + int (*_read_oob) (struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); - int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, - size_t len); - int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, u_char *buf); - int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, - size_t len); - int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, u_char *buf); - int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, u_char *buf); - int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, - size_t len); - int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, + int (*_write_oob) (struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops); + int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, + size_t len, size_t *retlen, u_char *buf); + int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len); + int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); - void (*sync) (struct mtd_info *mtd); - int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - int (*is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); - int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); - int (*suspend) (struct mtd_info *mtd); - void (*resume) (struct mtd_info *mtd); + void (*_sync) (struct mtd_info *mtd); + int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs); + int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs); + int (*_suspend) (struct mtd_info *mtd); + void (*_resume) (struct mtd_info *mtd); /* * If the driver is something smart, like UBI, it may need to maintain * its own reference counting. The below functions are only for driver. */ - int (*get_device) (struct mtd_info *mtd); - void (*put_device) (struct mtd_info *mtd); + int (*_get_device) (struct mtd_info *mtd); + void (*_put_device) (struct mtd_info *mtd); /* Backing device capabilities for this device * - provides mmap capabilities @@ -240,214 +243,75 @@ struct mtd_info { int usecount; }; -/* - * Erase is an asynchronous operation. Device drivers are supposed - * to call instr->callback() whenever the operation completes, even - * if it completes with a failure. - * Callers are supposed to pass a callback function and wait for it - * to be called before writing to the block. - */ -static inline int mtd_erase(struct mtd_info *mtd, struct erase_info *instr) -{ - return mtd->erase(mtd, instr); -} - -/* - * This stuff for eXecute-In-Place. phys is optional and may be set to NULL. - */ -static inline int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, void **virt, resource_size_t *phys) -{ - *retlen = 0; - if (!mtd->point) - return -EOPNOTSUPP; - return mtd->point(mtd, from, len, retlen, virt, phys); -} - -/* We probably shouldn't allow XIP if the unpoint isn't a NULL */ -static inline void mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len) -{ - return mtd->unpoint(mtd, from, len); -} - -/* - * Allow NOMMU mmap() to directly map the device (if not NULL) - * - return the address to which the offset maps - * - return -ENOSYS to indicate refusal to do the mapping - */ -static inline unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags) -{ - if (!mtd->get_unmapped_area) - return -EOPNOTSUPP; - return mtd->get_unmapped_area(mtd, len, offset, flags); -} - -static inline int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - return mtd->read(mtd, from, len, retlen, buf); -} - -static inline int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - *retlen = 0; - if (!mtd->write) - return -EROFS; - return mtd->write(mtd, to, len, retlen, buf); -} - -/* - * In blackbox flight recorder like scenarios we want to make successful writes - * in interrupt context. panic_write() is only intended to be called when its - * known the kernel is about to panic and we need the write to succeed. Since - * the kernel is not going to be running for much longer, this function can - * break locks and delay to ensure the write succeeds (but not sleep). - */ -static inline int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - *retlen = 0; - if (!mtd->panic_write) - return -EOPNOTSUPP; - return mtd->panic_write(mtd, to, len, retlen, buf); -} +int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); +int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + void **virt, resource_size_t *phys); +int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len); +unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len, + unsigned long offset, unsigned long flags); +int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf); +int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); +int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { ops->retlen = ops->oobretlen = 0; - if (!mtd->read_oob) + if (!mtd->_read_oob) return -EOPNOTSUPP; - return mtd->read_oob(mtd, from, ops); + return mtd->_read_oob(mtd, from, ops); } static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { ops->retlen = ops->oobretlen = 0; - if (!mtd->write_oob) - return -EOPNOTSUPP; - return mtd->write_oob(mtd, to, ops); -} - -/* - * Method to access the protection register area, present in some flash - * devices. The user data is one time programmable but the factory data is read - * only. - */ -static inline int mtd_get_fact_prot_info(struct mtd_info *mtd, - struct otp_info *buf, size_t len) -{ - if (!mtd->get_fact_prot_info) + if (!mtd->_write_oob) return -EOPNOTSUPP; - return mtd->get_fact_prot_info(mtd, buf, len); -} - -static inline int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, - u_char *buf) -{ - *retlen = 0; - if (!mtd->read_fact_prot_reg) - return -EOPNOTSUPP; - return mtd->read_fact_prot_reg(mtd, from, len, retlen, buf); -} - -static inline int mtd_get_user_prot_info(struct mtd_info *mtd, - struct otp_info *buf, - size_t len) -{ - if (!mtd->get_user_prot_info) - return -EOPNOTSUPP; - return mtd->get_user_prot_info(mtd, buf, len); -} - -static inline int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, - u_char *buf) -{ - *retlen = 0; - if (!mtd->read_user_prot_reg) - return -EOPNOTSUPP; - return mtd->read_user_prot_reg(mtd, from, len, retlen, buf); -} - -static inline int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, - size_t len, size_t *retlen, - u_char *buf) -{ - *retlen = 0; - if (!mtd->write_user_prot_reg) - return -EOPNOTSUPP; - return mtd->write_user_prot_reg(mtd, to, len, retlen, buf); + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + return mtd->_write_oob(mtd, to, ops); } -static inline int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len) -{ - if (!mtd->lock_user_prot_reg) - return -EOPNOTSUPP; - return mtd->lock_user_prot_reg(mtd, from, len); -} +int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf); +int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len); int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); static inline void mtd_sync(struct mtd_info *mtd) { - if (mtd->sync) - mtd->sync(mtd); -} - -/* Chip-supported device locking */ -static inline int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - if (!mtd->lock) - return -EOPNOTSUPP; - return mtd->lock(mtd, ofs, len); + if (mtd->_sync) + mtd->_sync(mtd); } -static inline int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - if (!mtd->unlock) - return -EOPNOTSUPP; - return mtd->unlock(mtd, ofs, len); -} - -static inline int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - if (!mtd->is_locked) - return -EOPNOTSUPP; - return mtd->is_locked(mtd, ofs, len); -} +int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs); +int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs); static inline int mtd_suspend(struct mtd_info *mtd) { - return mtd->suspend ? mtd->suspend(mtd) : 0; + return mtd->_suspend ? mtd->_suspend(mtd) : 0; } static inline void mtd_resume(struct mtd_info *mtd) { - if (mtd->resume) - mtd->resume(mtd); -} - -static inline int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs) -{ - if (!mtd->block_isbad) - return 0; - return mtd->block_isbad(mtd, ofs); -} - -static inline int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs) -{ - if (!mtd->block_markbad) - return -EOPNOTSUPP; - return mtd->block_markbad(mtd, ofs); + if (mtd->_resume) + mtd->_resume(mtd); } static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) @@ -482,12 +346,12 @@ static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd) static inline int mtd_has_oob(const struct mtd_info *mtd) { - return mtd->read_oob && mtd->write_oob; + return mtd->_read_oob && mtd->_write_oob; } static inline int mtd_can_have_bb(const struct mtd_info *mtd) { - return !!mtd->block_isbad; + return !!mtd->_block_isbad; } /* Kernel-side ioctl definitions */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 63b5a8b6dfbd..1482340d3d9f 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -324,6 +324,7 @@ struct nand_hw_control { * @steps: number of ECC steps per page * @size: data bytes per ECC step * @bytes: ECC bytes per step + * @strength: max number of correctible bits per ECC step * @total: total number of ECC bytes per page * @prepad: padding information for syndrome based ECC generators * @postpad: padding information for syndrome based ECC generators @@ -351,6 +352,7 @@ struct nand_ecc_ctrl { int size; int bytes; int total; + int strength; int prepad; int postpad; struct nand_ecclayout *layout; @@ -448,8 +450,9 @@ struct nand_buffers { * will be copied to the appropriate nand_bbt_descr's. * @badblockpos: [INTERN] position of the bad block marker in the oob * area. - * @badblockbits: [INTERN] number of bits to left-shift the bad block - * number + * @badblockbits: [INTERN] minimum number of set bits in a good block's + * bad block marker position; i.e., BBM == 11110111b is + * not bad when badblockbits == 7 * @cellinfo: [INTERN] MLC/multichip data from chip ident * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h deleted file mode 100644 index 27ad40aed19f..000000000000 --- a/include/linux/mtd/pmc551.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * PMC551 PCI Mezzanine Ram Device - * - * Author: - * Mark Ferrell - * Copyright 1999,2000 Nortel Networks - * - * License: - * As part of this driver was derrived from the slram.c driver it falls - * under the same license, which is GNU General Public License v2 - */ - -#ifndef __MTD_PMC551_H__ -#define __MTD_PMC551_H__ - -#include <linux/mtd/mtd.h> - -#define PMC551_VERSION \ - "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n" - -/* - * Our personal and private information - */ -struct mypriv { - struct pci_dev *dev; - u_char *start; - u32 base_map0; - u32 curr_map0; - u32 asize; - struct mtd_info *nextpmc551; -}; - -/* - * Function Prototypes - */ -static int pmc551_erase(struct mtd_info *, struct erase_info *); -static void pmc551_unpoint(struct mtd_info *, loff_t, size_t); -static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, void **virt, resource_size_t *phys); -static int pmc551_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); -static int pmc551_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); - - -/* - * Define the PCI ID's if the kernel doesn't define them for us - */ -#ifndef PCI_VENDOR_ID_V3_SEMI -#define PCI_VENDOR_ID_V3_SEMI 0x11b0 -#endif - -#ifndef PCI_DEVICE_ID_V3_SEMI_V370PDC -#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200 -#endif - - -#define PMC551_PCI_MEM_MAP0 0x50 -#define PMC551_PCI_MEM_MAP1 0x54 -#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000 -#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0 -#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002 -#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001 - -#define PMC551_SDRAM_MA 0x60 -#define PMC551_SDRAM_CMD 0x62 -#define PMC551_DRAM_CFG 0x64 -#define PMC551_SYS_CTRL_REG 0x78 - -#define PMC551_DRAM_BLK0 0x68 -#define PMC551_DRAM_BLK1 0x6c -#define PMC551_DRAM_BLK2 0x70 -#define PMC551_DRAM_BLK3 0x74 -#define PMC551_DRAM_BLK_GET_SIZE(x) (524288<<((x>>4)&0x0f)) -#define PMC551_DRAM_BLK_SET_COL_MUX(x,v) (((x) & ~0x00007000) | (((v) & 0x7) << 12)) -#define PMC551_DRAM_BLK_SET_ROW_MUX(x,v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8)) - - -#endif /* __MTD_PMC551_H__ */ - diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index 9cf4c4c79555..a38e1fa8af01 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -23,6 +23,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/pm_qos.h> /* FLCTL registers */ #define FLCMNCR(f) (f->reg + 0x0) @@ -38,6 +39,7 @@ #define FLDTFIFO(f) (f->reg + 0x24) #define FLECFIFO(f) (f->reg + 0x28) #define FLTRCR(f) (f->reg + 0x2C) +#define FLHOLDCR(f) (f->reg + 0x38) #define FL4ECCRESULT0(f) (f->reg + 0x80) #define FL4ECCRESULT1(f) (f->reg + 0x84) #define FL4ECCRESULT2(f) (f->reg + 0x88) @@ -67,6 +69,30 @@ #define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */ #define TYPESEL_SET (0x1 << 0) +/* + * Clock settings using the PULSEx registers from FLCMNCR + * + * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E + * to control the clock divider used between the High-Speed Peripheral Clock + * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit + * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16 + * bit version the divider is seperate for the pulse width of high and low + * signals. + */ +#define PULSE3 (0x1 << 27) +#define PULSE2 (0x1 << 17) +#define PULSE1 (0x1 << 15) +#define PULSE0 (0x1 << 9) +#define CLK_8B_0_5 PULSE1 +#define CLK_8B_1 0x0 +#define CLK_8B_1_5 (PULSE1 | PULSE2) +#define CLK_8B_2 PULSE0 +#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2) +#define CLK_8B_4 (PULSE0 | PULSE2) +#define CLK_16B_6L_2H PULSE0 +#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2) +#define CLK_16B_12L_4H (PULSE0 | PULSE2) + /* FLCMDCR control bits */ #define ADRCNT2_E (0x1 << 31) /* 5byte address enable */ #define ADRMD_E (0x1 << 26) /* Sector address access */ @@ -85,6 +111,15 @@ #define TRSTRT (0x1 << 0) /* translation start */ #define TREND (0x1 << 1) /* translation end */ +/* + * FLHOLDCR control bits + * + * HOLDEN: Bus Occupancy Enable (inverted) + * Enable this bit when the external bus might be used in between transfers. + * If not set and the bus gets used by other modules, a deadlock occurs. + */ +#define HOLDEN (0x1 << 0) + /* FL4ECCCR control bits */ #define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */ #define _4ECCEND (0x1 << 1) /* 4 symbols end */ @@ -97,6 +132,7 @@ struct sh_flctl { struct mtd_info mtd; struct nand_chip chip; struct platform_device *pdev; + struct dev_pm_qos_request pm_qos; void __iomem *reg; uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */ @@ -108,11 +144,14 @@ struct sh_flctl { int erase1_page_addr; /* page_addr in ERASE1 cmd */ uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */ uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */ + uint32_t flcmncr_base; /* base value of FLCMNCR */ int hwecc_cant_correct[4]; unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */ unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */ + unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */ + unsigned qos_request:1; /* QoS request to prevent deep power shutdown */ }; struct sh_flctl_platform_data { @@ -121,6 +160,7 @@ struct sh_flctl_platform_data { unsigned long flcmncr_val; unsigned has_hwecc:1; + unsigned use_holden:1; }; static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo) diff --git a/include/linux/mtd/spear_smi.h b/include/linux/mtd/spear_smi.h new file mode 100644 index 000000000000..8ae1726044c3 --- /dev/null +++ b/include/linux/mtd/spear_smi.h @@ -0,0 +1,65 @@ +/* + * Copyright © 2010 ST Microelectronics + * Shiraz Hashim <shiraz.hashim@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MTD_SPEAR_SMI_H +#define __MTD_SPEAR_SMI_H + +#include <linux/types.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/of.h> + +/* max possible slots for serial-nor flash chip in the SMI controller */ +#define MAX_NUM_FLASH_CHIP 4 + +/* macro to define partitions for flash devices */ +#define DEFINE_PARTS(n, of, s) \ +{ \ + .name = n, \ + .offset = of, \ + .size = s, \ +} + +/** + * struct spear_smi_flash_info - platform structure for passing flash + * information + * + * name: name of the serial nor flash for identification + * mem_base: the memory base on which the flash is mapped + * size: size of the flash in bytes + * partitions: parition details + * nr_partitions: number of partitions + * fast_mode: whether flash supports fast mode + */ + +struct spear_smi_flash_info { + char *name; + unsigned long mem_base; + unsigned long size; + struct mtd_partition *partitions; + int nr_partitions; + u8 fast_mode; +}; + +/** + * struct spear_smi_plat_data - platform structure for configuring smi + * + * clk_rate: clk rate at which SMI must operate + * num_flashes: number of flashes present on board + * board_flash_info: specific details of each flash present on board + */ +struct spear_smi_plat_data { + unsigned long clk_rate; + int num_flashes; + struct spear_smi_flash_info *board_flash_info; + struct device_node *np[MAX_NUM_FLASH_CHIP]; +}; + +#endif /* __MTD_SPEAR_SMI_H */ diff --git a/include/linux/mtio.h b/include/linux/mtio.h index 8f825756c459..18543e2db06f 100644 --- a/include/linux/mtio.h +++ b/include/linux/mtio.h @@ -194,6 +194,7 @@ struct mtpos { #define MT_ST_SYSV 0x1000 #define MT_ST_NOWAIT 0x2000 #define MT_ST_SILI 0x4000 +#define MT_ST_NOWAIT_EOF 0x8000 /* The mode parameters to be controlled. Parameter chosen with bits 20-28 */ #define MT_ST_CLEAR_DEFAULT 0xfffff diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 8debe299676d..5cbaa20f1659 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -33,12 +33,12 @@ #ifdef __KERNEL__ #include <linux/pm_qos.h> #include <linux/timer.h> +#include <linux/bug.h> #include <linux/delay.h> #include <linux/atomic.h> #include <asm/cache.h> #include <asm/byteorder.h> -#include <linux/device.h> #include <linux/percpu.h> #include <linux/rculist.h> #include <linux/dmaengine.h> @@ -56,6 +56,7 @@ #include <linux/netdev_features.h> struct netpoll_info; +struct device; struct phy_device; /* 802.11 specific */ struct wireless_dev; @@ -2603,8 +2604,6 @@ extern void net_disable_timestamp(void); extern void *dev_seq_start(struct seq_file *seq, loff_t *pos); extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos); extern void dev_seq_stop(struct seq_file *seq, void *v); -extern int dev_seq_open_ops(struct inode *inode, struct file *file, - const struct seq_operations *ops); #endif extern int netdev_class_create_file(struct class_attribute *class_attr); diff --git a/include/linux/nfs.h b/include/linux/nfs.h index 8c6ee44914cb..6d1fb63f5922 100644 --- a/include/linux/nfs.h +++ b/include/linux/nfs.h @@ -29,7 +29,7 @@ #define NFS_MNT_VERSION 1 #define NFS_MNT3_VERSION 3 -#define NFS_PIPE_DIRNAME "/nfs" +#define NFS_PIPE_DIRNAME "nfs" /* * NFS stats. The good thing with these values is that NFSv3 errors are diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index 32345c2805c0..0987146b0637 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -183,15 +183,12 @@ struct nfs4_acl { typedef struct { char data[NFS4_VERIFIER_SIZE]; } nfs4_verifier; -struct nfs41_stateid { +struct nfs_stateid4 { __be32 seqid; char other[NFS4_STATEID_OTHER_SIZE]; } __attribute__ ((packed)); -typedef union { - char data[NFS4_STATEID_SIZE]; - struct nfs41_stateid stateid; -} nfs4_stateid; +typedef struct nfs_stateid4 nfs4_stateid; enum nfs_opnum4 { OP_ACCESS = 3, @@ -441,7 +438,20 @@ enum limit_by4 { enum open_delegation_type4 { NFS4_OPEN_DELEGATE_NONE = 0, NFS4_OPEN_DELEGATE_READ = 1, - NFS4_OPEN_DELEGATE_WRITE = 2 + NFS4_OPEN_DELEGATE_WRITE = 2, + NFS4_OPEN_DELEGATE_NONE_EXT = 3, /* 4.1 */ +}; + +enum why_no_delegation4 { /* new to v4.1 */ + WND4_NOT_WANTED = 0, + WND4_CONTENTION = 1, + WND4_RESOURCE = 2, + WND4_NOT_SUPP_FTYPE = 3, + WND4_WRITE_DELEG_NOT_SUPP_FTYPE = 4, + WND4_NOT_SUPP_UPGRADE = 5, + WND4_NOT_SUPP_DOWNGRADE = 6, + WND4_CANCELLED = 7, + WND4_IS_DIR = 8, }; enum lock_type4 { diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 8c29950d2fa5..52a1bdb4ee2b 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -38,6 +38,13 @@ #ifdef __KERNEL__ +/* + * Enable dprintk() debugging support for nfs client. + */ +#ifdef CONFIG_NFS_DEBUG +# define NFS_DEBUG +#endif + #include <linux/in.h> #include <linux/mm.h> #include <linux/pagemap.h> @@ -171,13 +178,9 @@ struct nfs_inode { */ __be32 cookieverf[2]; - /* - * This is the list of dirty unwritten pages. - */ - struct radix_tree_root nfs_page_tree; - unsigned long npages; unsigned long ncommit; + struct list_head commit_list; /* Open contexts for shared mmap writes */ struct list_head open_files; @@ -395,6 +398,29 @@ static inline void nfs_free_fhandle(const struct nfs_fh *fh) kfree(fh); } +#ifdef NFS_DEBUG +extern u32 _nfs_display_fhandle_hash(const struct nfs_fh *fh); +static inline u32 nfs_display_fhandle_hash(const struct nfs_fh *fh) +{ + return _nfs_display_fhandle_hash(fh); +} +extern void _nfs_display_fhandle(const struct nfs_fh *fh, const char *caption); +#define nfs_display_fhandle(fh, caption) \ + do { \ + if (unlikely(nfs_debug & NFSDBG_FACILITY)) \ + _nfs_display_fhandle(fh, caption); \ + } while (0) +#else +static inline u32 nfs_display_fhandle_hash(const struct nfs_fh *fh) +{ + return 0; +} +static inline void nfs_display_fhandle(const struct nfs_fh *fh, + const char *caption) +{ +} +#endif + /* * linux/fs/nfs/nfsroot.c */ @@ -632,19 +658,13 @@ nfs_fileid_to_ino_t(u64 fileid) #ifdef __KERNEL__ -/* - * Enable debugging support for nfs client. - * Requires RPC_DEBUG. - */ -#ifdef RPC_DEBUG -# define NFS_DEBUG -#endif - # undef ifdebug # ifdef NFS_DEBUG # define ifdebug(fac) if (unlikely(nfs_debug & NFSDBG_##fac)) +# define NFS_IFDEBUG(x) x # else # define ifdebug(fac) if (0) +# define NFS_IFDEBUG(x) # endif #endif /* __KERNEL */ diff --git a/include/linux/nfs_fs_i.h b/include/linux/nfs_fs_i.h index 861730275ba0..a5c50d97341e 100644 --- a/include/linux/nfs_fs_i.h +++ b/include/linux/nfs_fs_i.h @@ -1,10 +1,6 @@ #ifndef _NFS_FS_I #define _NFS_FS_I -#include <asm/types.h> -#include <linux/list.h> -#include <linux/nfs.h> - struct nlm_lockowner; /* diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index ba4d7656ecfd..7073fc74481c 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -3,6 +3,7 @@ #include <linux/list.h> #include <linux/backing-dev.h> +#include <linux/idr.h> #include <linux/wait.h> #include <linux/nfs_xdr.h> #include <linux/sunrpc/xprt.h> @@ -17,6 +18,7 @@ struct nfs4_sequence_res; struct nfs_server; struct nfs4_minor_version_ops; struct server_scope; +struct nfs41_impl_id; /* * The nfs_client identifies our client state to the server. @@ -85,6 +87,8 @@ struct nfs_client { #endif struct server_scope *server_scope; /* from exchange_id */ + struct nfs41_impl_id *impl_id; /* from exchange_id */ + struct net *net; }; /* @@ -144,15 +148,18 @@ struct nfs_server { u32 acl_bitmask; /* V4 bitmask representing the ACEs that are supported on this filesystem */ + u32 fh_expire_type; /* V4 bitmask representing file + handle volatility type for + this filesystem */ struct pnfs_layoutdriver_type *pnfs_curr_ld; /* Active layout driver */ struct rpc_wait_queue roc_rpcwaitq; void *pnfs_ld_data; /* per mount point data */ /* the following fields are protected by nfs_client->cl_lock */ struct rb_root state_owners; - struct rb_root openowner_id; - struct rb_root lockowner_id; #endif + struct ida openowner_id; + struct ida lockowner_id; struct list_head state_owners_lru; struct list_head layouts; struct list_head delegations; @@ -188,21 +195,23 @@ struct nfs_server { /* maximum number of slots to use */ -#define NFS4_MAX_SLOT_TABLE RPC_MAX_SLOT_TABLE +#define NFS4_DEF_SLOT_TABLE_SIZE (16U) +#define NFS4_MAX_SLOT_TABLE (256U) +#define NFS4_NO_SLOT ((u32)-1) #if defined(CONFIG_NFS_V4) /* Sessions */ -#define SLOT_TABLE_SZ (NFS4_MAX_SLOT_TABLE/(8*sizeof(long))) +#define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long)) struct nfs4_slot_table { struct nfs4_slot *slots; /* seqid per slot */ unsigned long used_slots[SLOT_TABLE_SZ]; /* used/unused bitmap */ spinlock_t slot_tbl_lock; struct rpc_wait_queue slot_tbl_waitq; /* allocators may wait here */ - int max_slots; /* # slots in table */ - int highest_used_slotid; /* sent to server on each SEQ. + u32 max_slots; /* # slots in table */ + u32 highest_used_slotid; /* sent to server on each SEQ. * op for dynamic resizing */ - int target_max_slots; /* Set by CB_RECALL_SLOT as + u32 target_max_slots; /* Set by CB_RECALL_SLOT as * the new max_slots */ struct completion complete; }; diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h index 308c18877018..7eed2012d288 100644 --- a/include/linux/nfs_idmap.h +++ b/include/linux/nfs_idmap.h @@ -69,36 +69,22 @@ struct nfs_server; struct nfs_fattr; struct nfs4_string; -#ifdef CONFIG_NFS_USE_NEW_IDMAPPER - +#ifdef CONFIG_NFS_V4 int nfs_idmap_init(void); void nfs_idmap_quit(void); - -static inline int nfs_idmap_new(struct nfs_client *clp) -{ - return 0; -} - -static inline void nfs_idmap_delete(struct nfs_client *clp) -{ -} - -#else /* CONFIG_NFS_USE_NEW_IDMAPPER not set */ - +#else static inline int nfs_idmap_init(void) { return 0; } static inline void nfs_idmap_quit(void) -{ -} +{} +#endif int nfs_idmap_new(struct nfs_client *); void nfs_idmap_delete(struct nfs_client *); -#endif /* CONFIG_NFS_USE_NEW_IDMAPPER */ - void nfs_fattr_init_names(struct nfs_fattr *fattr, struct nfs4_string *owner_name, struct nfs4_string *group_name); diff --git a/include/linux/nfs_iostat.h b/include/linux/nfs_iostat.h index 8866bb3502ee..9dcbbe9a51fb 100644 --- a/include/linux/nfs_iostat.h +++ b/include/linux/nfs_iostat.h @@ -21,7 +21,7 @@ #ifndef _LINUX_NFS_IOSTAT #define _LINUX_NFS_IOSTAT -#define NFS_IOSTAT_VERS "1.0" +#define NFS_IOSTAT_VERS "1.1" /* * NFS byte counters diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index ab465fe8c3d6..eac30d6bec17 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -19,12 +19,6 @@ #include <linux/kref.h> /* - * Valid flags for the radix tree - */ -#define NFS_PAGE_TAG_LOCKED 0 -#define NFS_PAGE_TAG_COMMIT 1 - -/* * Valid flags for a dirty buffer */ enum { @@ -33,16 +27,13 @@ enum { PG_CLEAN, PG_NEED_COMMIT, PG_NEED_RESCHED, - PG_PNFS_COMMIT, PG_PARTIAL_READ_FAILED, + PG_COMMIT_TO_DS, }; struct nfs_inode; struct nfs_page { - union { - struct list_head wb_list; /* Defines state of page: */ - struct pnfs_layout_segment *wb_commit_lseg; /* Used when PG_PNFS_COMMIT set */ - }; + struct list_head wb_list; /* Defines state of page: */ struct page *wb_page; /* page to read in/write out */ struct nfs_open_context *wb_context; /* File state context info */ struct nfs_lock_context *wb_lock_context; /* lock context info */ @@ -90,8 +81,6 @@ extern struct nfs_page *nfs_create_request(struct nfs_open_context *ctx, extern void nfs_release_request(struct nfs_page *req); -extern int nfs_scan_list(struct nfs_inode *nfsi, struct list_head *dst, - pgoff_t idx_start, unsigned int npages, int tag); extern void nfs_pageio_init(struct nfs_pageio_descriptor *desc, struct inode *inode, const struct nfs_pageio_ops *pg_ops, @@ -106,8 +95,6 @@ extern bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc, struct nfs_page *req); extern int nfs_wait_on_request(struct nfs_page *); extern void nfs_unlock_request(struct nfs_page *req); -extern int nfs_set_page_tag_locked(struct nfs_page *req); -extern void nfs_clear_page_tag_locked(struct nfs_page *req); /* * Lock the page of an asynchronous request without getting a new reference @@ -118,6 +105,16 @@ nfs_lock_request_dontget(struct nfs_page *req) return !test_and_set_bit(PG_BUSY, &req->wb_flags); } +static inline int +nfs_lock_request(struct nfs_page *req) +{ + if (test_and_set_bit(PG_BUSY, &req->wb_flags)) + return 0; + kref_get(&req->wb_kref); + return 1; +} + + /** * nfs_list_add_request - Insert a request into a list * @req: request diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index d6ba9a12591e..bfd0d1bf6707 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -2,7 +2,6 @@ #define _LINUX_NFS_XDR_H #include <linux/nfsacl.h> -#include <linux/nfs3.h> #include <linux/sunrpc/gss_api.h> /* @@ -89,11 +88,12 @@ struct nfs_fattr { #define NFS_ATTR_FATTR_PRECTIME (1U << 16) #define NFS_ATTR_FATTR_CHANGE (1U << 17) #define NFS_ATTR_FATTR_PRECHANGE (1U << 18) -#define NFS_ATTR_FATTR_V4_REFERRAL (1U << 19) /* NFSv4 referral */ -#define NFS_ATTR_FATTR_MOUNTPOINT (1U << 20) /* Treat as mountpoint */ -#define NFS_ATTR_FATTR_MOUNTED_ON_FILEID (1U << 21) -#define NFS_ATTR_FATTR_OWNER_NAME (1U << 22) -#define NFS_ATTR_FATTR_GROUP_NAME (1U << 23) +#define NFS_ATTR_FATTR_V4_LOCATIONS (1U << 19) +#define NFS_ATTR_FATTR_V4_REFERRAL (1U << 20) +#define NFS_ATTR_FATTR_MOUNTPOINT (1U << 21) +#define NFS_ATTR_FATTR_MOUNTED_ON_FILEID (1U << 22) +#define NFS_ATTR_FATTR_OWNER_NAME (1U << 23) +#define NFS_ATTR_FATTR_GROUP_NAME (1U << 24) #define NFS_ATTR_FATTR (NFS_ATTR_FATTR_TYPE \ | NFS_ATTR_FATTR_MODE \ @@ -182,7 +182,7 @@ struct nfs4_slot { struct nfs4_sequence_args { struct nfs4_session *sa_session; - u8 sa_slotid; + u32 sa_slotid; u8 sa_cache_this; }; @@ -977,6 +977,7 @@ struct nfs4_server_caps_res { u32 acl_bitmask; u32 has_links; u32 has_symlinks; + u32 fh_expire_type; struct nfs4_sequence_res seq_res; }; @@ -1055,14 +1056,6 @@ struct nfstime4 { }; #ifdef CONFIG_NFS_V4_1 -struct nfs_impl_id4 { - u32 domain_len; - char *domain; - u32 name_len; - char *name; - struct nfstime4 date; -}; - #define NFS4_EXCHANGE_ID_LEN (48) struct nfs41_exchange_id_args { struct nfs_client *client; @@ -1083,10 +1076,17 @@ struct server_scope { char server_scope[NFS4_OPAQUE_LIMIT]; }; +struct nfs41_impl_id { + char domain[NFS4_OPAQUE_LIMIT + 1]; + char name[NFS4_OPAQUE_LIMIT + 1]; + struct nfstime4 date; +}; + struct nfs41_exchange_id_res { struct nfs_client *client; u32 flags; struct server_scope *server_scope; + struct nfs41_impl_id *impl_id; }; struct nfs41_create_session_args { @@ -1192,6 +1192,27 @@ struct nfs_write_data { struct page *page_array[NFS_PAGEVEC_SIZE]; }; +struct nfs_unlinkdata { + struct hlist_node list; + struct nfs_removeargs args; + struct nfs_removeres res; + struct inode *dir; + struct rpc_cred *cred; + struct nfs_fattr dir_attr; +}; + +struct nfs_renamedata { + struct nfs_renameargs args; + struct nfs_renameres res; + struct rpc_cred *cred; + struct inode *old_dir; + struct dentry *old_dentry; + struct nfs_fattr old_fattr; + struct inode *new_dir; + struct dentry *new_dentry; + struct nfs_fattr new_fattr; +}; + struct nfs_access_entry; struct nfs_client; struct rpc_timeout; @@ -1221,10 +1242,12 @@ struct nfs_rpc_ops { struct iattr *, int, struct nfs_open_context *); int (*remove) (struct inode *, struct qstr *); void (*unlink_setup) (struct rpc_message *, struct inode *dir); + void (*unlink_rpc_prepare) (struct rpc_task *, struct nfs_unlinkdata *); int (*unlink_done) (struct rpc_task *, struct inode *); int (*rename) (struct inode *, struct qstr *, struct inode *, struct qstr *); void (*rename_setup) (struct rpc_message *msg, struct inode *dir); + void (*rename_rpc_prepare)(struct rpc_task *task, struct nfs_renamedata *); int (*rename_done) (struct rpc_task *task, struct inode *old_dir, struct inode *new_dir); int (*link) (struct inode *, struct inode *, struct qstr *); int (*symlink) (struct inode *, struct dentry *, struct page *, @@ -1244,8 +1267,10 @@ struct nfs_rpc_ops { int (*set_capabilities)(struct nfs_server *, struct nfs_fh *); int (*decode_dirent)(struct xdr_stream *, struct nfs_entry *, int); void (*read_setup) (struct nfs_read_data *, struct rpc_message *); + void (*read_rpc_prepare)(struct rpc_task *, struct nfs_read_data *); int (*read_done) (struct rpc_task *, struct nfs_read_data *); void (*write_setup) (struct nfs_write_data *, struct rpc_message *); + void (*write_rpc_prepare)(struct rpc_task *, struct nfs_write_data *); int (*write_done) (struct rpc_task *, struct nfs_write_data *); void (*commit_setup) (struct nfs_write_data *, struct rpc_message *); int (*commit_done) (struct rpc_task *, struct nfs_write_data *); @@ -1275,11 +1300,11 @@ struct nfs_rpc_ops { extern const struct nfs_rpc_ops nfs_v2_clientops; extern const struct nfs_rpc_ops nfs_v3_clientops; extern const struct nfs_rpc_ops nfs_v4_clientops; -extern struct rpc_version nfs_version2; -extern struct rpc_version nfs_version3; -extern struct rpc_version nfs_version4; +extern const struct rpc_version nfs_version2; +extern const struct rpc_version nfs_version3; +extern const struct rpc_version nfs_version4; -extern struct rpc_version nfsacl_version3; -extern struct rpc_program nfsacl_program; +extern const struct rpc_version nfsacl_version3; +extern const struct rpc_program nfsacl_program; #endif diff --git a/include/linux/nfsd/cld.h b/include/linux/nfsd/cld.h new file mode 100644 index 000000000000..f14a9ab06f1f --- /dev/null +++ b/include/linux/nfsd/cld.h @@ -0,0 +1,56 @@ +/* + * Upcall description for nfsdcld communication + * + * Copyright (c) 2012 Red Hat, Inc. + * Author(s): Jeff Layton <jlayton@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _NFSD_CLD_H +#define _NFSD_CLD_H + +/* latest upcall version available */ +#define CLD_UPCALL_VERSION 1 + +/* defined by RFC3530 */ +#define NFS4_OPAQUE_LIMIT 1024 + +enum cld_command { + Cld_Create, /* create a record for this cm_id */ + Cld_Remove, /* remove record of this cm_id */ + Cld_Check, /* is this cm_id allowed? */ + Cld_GraceDone, /* grace period is complete */ +}; + +/* representation of long-form NFSv4 client ID */ +struct cld_name { + uint16_t cn_len; /* length of cm_id */ + unsigned char cn_id[NFS4_OPAQUE_LIMIT]; /* client-provided */ +} __attribute__((packed)); + +/* message struct for communication with userspace */ +struct cld_msg { + uint8_t cm_vers; /* upcall version */ + uint8_t cm_cmd; /* upcall command */ + int16_t cm_status; /* return code */ + uint32_t cm_xid; /* transaction id */ + union { + int64_t cm_gracetime; /* grace period start time */ + struct cld_name cm_name; + } __attribute__((packed)) cm_u; +} __attribute__((packed)); + +#endif /* !_NFSD_CLD_H */ diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 7454ad7451b4..89bd4a4dcfb4 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -41,6 +41,7 @@ #include <linux/types.h> #include <linux/ioctl.h> #include <linux/magic.h> +#include <linux/bug.h> #define NILFS_INODE_BMAP_SIZE 7 diff --git a/include/linux/nmi.h b/include/linux/nmi.h index 2d304efc89df..db50840e6355 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -14,7 +14,7 @@ * may be used to reset the timeout - for code which intentionally * disables interrupts for a long time. This call is stateless. */ -#if defined(ARCH_HAS_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR) +#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR) #include <asm/nmi.h> extern void touch_nmi_watchdog(void); #else diff --git a/include/linux/of.h b/include/linux/of.h index f02d8b2f799d..fa7fb1d97458 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -351,6 +351,22 @@ static inline int of_machine_is_compatible(const char *compat) #define of_match_node(_matches, _node) NULL #endif /* CONFIG_OF */ +/** + * of_property_read_bool - Findfrom a property + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * + * Search for a property in a device node. + * Returns true if the property exist false otherwise. + */ +static inline bool of_property_read_bool(const struct device_node *np, + const char *propname) +{ + struct property *prop = of_find_property(np, propname, NULL); + + return prop ? true : false; +} + static inline int of_property_read_u32(const struct device_node *np, const char *propname, u32 *out_value) diff --git a/include/linux/of_device.h b/include/linux/of_device.h index cbc42143fa5b..901b7435e890 100644 --- a/include/linux/of_device.h +++ b/include/linux/of_device.h @@ -5,10 +5,11 @@ #include <linux/of_platform.h> /* temporary until merge */ #ifdef CONFIG_OF_DEVICE -#include <linux/device.h> #include <linux/of.h> #include <linux/mod_devicetable.h> +struct device; + extern const struct of_device_id *of_match_device( const struct of_device_id *matches, const struct device *dev); extern void of_device_make_bus_id(struct device *dev); diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h index b254052a49d7..81733d12cbea 100644 --- a/include/linux/of_gpio.h +++ b/include/linux/of_gpio.h @@ -50,7 +50,8 @@ static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc) extern int of_get_named_gpio_flags(struct device_node *np, const char *list_name, int index, enum of_gpio_flags *flags); -extern unsigned int of_gpio_count(struct device_node *np); +extern unsigned int of_gpio_named_count(struct device_node *np, + const char* propname); extern int of_mm_gpiochip_add(struct device_node *np, struct of_mm_gpio_chip *mm_gc); @@ -71,7 +72,8 @@ static inline int of_get_named_gpio_flags(struct device_node *np, return -ENOSYS; } -static inline unsigned int of_gpio_count(struct device_node *np) +static inline unsigned int of_gpio_named_count(struct device_node *np, + const char* propname) { return 0; } @@ -89,6 +91,27 @@ static inline void of_gpiochip_remove(struct gpio_chip *gc) { } #endif /* CONFIG_OF_GPIO */ /** + * of_gpio_count - Count GPIOs for a device + * @np: device node to count GPIOs for + * + * The function returns the count of GPIOs specified for a node. + * + * Note that the empty GPIO specifiers counts too. For example, + * + * gpios = <0 + * &pio1 1 2 + * 0 + * &pio2 3 4>; + * + * defines four GPIOs (so this function will return 4), two of which + * are not specified. + */ +static inline unsigned int of_gpio_count(struct device_node *np) +{ + return of_gpio_named_count(np, "gpios"); +} + +/** * of_get_gpio_flags() - Get a GPIO number and flags to use with GPIO API * @np: device node to get GPIO from * @index: index of the GPIO diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h new file mode 100644 index 000000000000..bae1b6094c63 --- /dev/null +++ b/include/linux/of_mtd.h @@ -0,0 +1,19 @@ +/* + * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * OF helpers for mtd. + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_OF_MTD_H +#define __LINUX_OF_NET_H + +#ifdef CONFIG_OF_MTD +#include <linux/of.h> +extern const int of_get_nand_ecc_mode(struct device_node *np); +int of_get_nand_bus_width(struct device_node *np); +bool of_get_nand_on_flash_bbt(struct device_node *np); +#endif + +#endif /* __LINUX_OF_MTD_H */ diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h index c0b018790f07..4ff57e81051d 100644 --- a/include/linux/omapfb.h +++ b/include/linux/omapfb.h @@ -222,41 +222,11 @@ struct omapfb_display_info { #include <plat/board.h> -#ifdef CONFIG_ARCH_OMAP1 -#define OMAPFB_PLANE_NUM 1 -#else -#define OMAPFB_PLANE_NUM 3 -#endif - -struct omapfb_mem_region { - u32 paddr; - void __iomem *vaddr; - unsigned long size; - u8 type; /* OMAPFB_PLANE_MEM_* */ - enum omapfb_color_format format;/* OMAPFB_COLOR_* */ - unsigned format_used:1; /* Must be set when format is set. - * Needed b/c of the badly chosen 0 - * base for OMAPFB_COLOR_* values - */ - unsigned alloc:1; /* allocated by the driver */ - unsigned map:1; /* kernel mapped by the driver */ -}; - -struct omapfb_mem_desc { - int region_cnt; - struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; -}; - struct omapfb_platform_data { struct omap_lcd_config lcd; - struct omapfb_mem_desc mem_desc; - void *ctrl_platform_data; }; -/* in arch/arm/plat-omap/fb.c */ -extern void omapfb_set_platform_data(struct omapfb_platform_data *data); -extern void omapfb_set_ctrl_platform_data(void *pdata); -extern void omapfb_reserve_sdram_memblock(void); +void __init omapfb_set_lcd_config(const struct omap_lcd_config *config); #endif diff --git a/include/linux/oom.h b/include/linux/oom.h index 552fba9c7d5a..3d7647536b03 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -49,7 +49,7 @@ extern int try_set_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags); extern void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags); extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, - int order, nodemask_t *mask); + int order, nodemask_t *mask, bool force_kill); extern int register_oom_notifier(struct notifier_block *nb); extern int unregister_oom_notifier(struct notifier_block *nb); diff --git a/include/linux/opp.h b/include/linux/opp.h index ee94b33080c2..2a4e5faee904 100644 --- a/include/linux/opp.h +++ b/include/linux/opp.h @@ -19,6 +19,7 @@ #include <linux/notifier.h> struct opp; +struct device; enum opp_event { OPP_EVENT_ADD, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index e90a673be67e..c88d2a9451af 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -6,6 +6,7 @@ #define PAGE_FLAGS_H #include <linux/types.h> +#include <linux/bug.h> #ifndef __GENERATING_BOUNDS_H #include <linux/mm_types.h> #include <generated/bounds.h> @@ -414,11 +415,26 @@ static inline int PageTransHuge(struct page *page) return PageHead(page); } +/* + * PageTransCompound returns true for both transparent huge pages + * and hugetlbfs pages, so it should only be called when it's known + * that hugetlbfs pages aren't involved. + */ static inline int PageTransCompound(struct page *page) { return PageCompound(page); } +/* + * PageTransTail returns true for both transparent huge pages + * and hugetlbfs pages, so it should only be called when it's known + * that hugetlbfs pages aren't involved. + */ +static inline int PageTransTail(struct page *page) +{ + return PageTail(page); +} + #else static inline int PageTransHuge(struct page *page) @@ -430,6 +446,11 @@ static inline int PageTransCompound(struct page *page) { return 0; } + +static inline int PageTransTail(struct page *page) +{ + return 0; +} #endif #ifdef CONFIG_MMU diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index a2d11771c84b..a88cdba27809 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -4,12 +4,8 @@ enum { /* flags for mem_cgroup */ PCG_LOCK, /* Lock for pc->mem_cgroup and following bits. */ - PCG_CACHE, /* charged as cache */ PCG_USED, /* this object is in use. */ PCG_MIGRATION, /* under page migration */ - /* flags for mem_cgroup and file and I/O status */ - PCG_MOVE_LOCK, /* For race between move_account v.s. following bits */ - PCG_FILE_MAPPED, /* page is accounted as "mapped" */ __NR_PCG_FLAGS, }; @@ -64,19 +60,10 @@ static inline void ClearPageCgroup##uname(struct page_cgroup *pc) \ static inline int TestClearPageCgroup##uname(struct page_cgroup *pc) \ { return test_and_clear_bit(PCG_##lname, &pc->flags); } -/* Cache flag is set only once (at allocation) */ -TESTPCGFLAG(Cache, CACHE) -CLEARPCGFLAG(Cache, CACHE) -SETPCGFLAG(Cache, CACHE) - TESTPCGFLAG(Used, USED) CLEARPCGFLAG(Used, USED) SETPCGFLAG(Used, USED) -SETPCGFLAG(FileMapped, FILE_MAPPED) -CLEARPCGFLAG(FileMapped, FILE_MAPPED) -TESTPCGFLAG(FileMapped, FILE_MAPPED) - SETPCGFLAG(Migration, MIGRATION) CLEARPCGFLAG(Migration, MIGRATION) TESTPCGFLAG(Migration, MIGRATION) @@ -85,7 +72,7 @@ static inline void lock_page_cgroup(struct page_cgroup *pc) { /* * Don't take this lock in IRQ context. - * This lock is for pc->mem_cgroup, USED, CACHE, MIGRATION + * This lock is for pc->mem_cgroup, USED, MIGRATION */ bit_spin_lock(PCG_LOCK, &pc->flags); } @@ -95,24 +82,6 @@ static inline void unlock_page_cgroup(struct page_cgroup *pc) bit_spin_unlock(PCG_LOCK, &pc->flags); } -static inline void move_lock_page_cgroup(struct page_cgroup *pc, - unsigned long *flags) -{ - /* - * We know updates to pc->flags of page cache's stats are from both of - * usual context or IRQ context. Disable IRQ to avoid deadlock. - */ - local_irq_save(*flags); - bit_spin_lock(PCG_MOVE_LOCK, &pc->flags); -} - -static inline void move_unlock_page_cgroup(struct page_cgroup *pc, - unsigned long *flags) -{ - bit_spin_unlock(PCG_MOVE_LOCK, &pc->flags); - local_irq_restore(*flags); -} - #else /* CONFIG_CGROUP_MEM_RES_CTLR */ struct page_cgroup; diff --git a/include/linux/parport.h b/include/linux/parport.h index 38a423ed3c01..106c2ca9440b 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -100,7 +100,6 @@ typedef enum { #include <linux/wait.h> #include <linux/irqreturn.h> #include <linux/semaphore.h> -#include <asm/system.h> #include <asm/ptrace.h> /* Define this later. */ diff --git a/include/linux/pci.h b/include/linux/pci.h index b843fe79583b..e444f5b49118 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -299,7 +299,6 @@ struct pci_dev { */ unsigned int irq; struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */ - resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */ /* These fields are used by common fixups */ unsigned int transparent:1; /* Transparent PCI bridge */ @@ -369,24 +368,17 @@ static inline int pci_channel_offline(struct pci_dev *pdev) return (pdev->error_state != pci_channel_io_normal); } -static inline struct pci_cap_saved_state *pci_find_saved_cap( - struct pci_dev *pci_dev, char cap) -{ - struct pci_cap_saved_state *tmp; - struct hlist_node *pos; - - hlist_for_each_entry(tmp, pos, &pci_dev->saved_cap_space, next) { - if (tmp->cap.cap_nr == cap) - return tmp; - } - return NULL; -} +struct pci_host_bridge_window { + struct list_head list; + struct resource *res; /* host bridge aperture (CPU address) */ + resource_size_t offset; /* bus address + offset = CPU address */ +}; -static inline void pci_add_saved_cap(struct pci_dev *pci_dev, - struct pci_cap_saved_state *new_cap) -{ - hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space); -} +struct pci_host_bridge { + struct list_head list; + struct pci_bus *bus; /* root bus */ + struct list_head windows; /* pci_host_bridge_windows */ +}; /* * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond @@ -656,6 +648,10 @@ void pci_fixup_cardbus(struct pci_bus *); /* Generic PCI functions used internally */ +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res); +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); void pcibios_scan_specific_bus(int busn); extern struct pci_bus *pci_find_bus(int domain, int busnr); void pci_bus_add_devices(const struct pci_bus *bus); @@ -690,7 +686,8 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); extern struct pci_dev *pci_dev_get(struct pci_dev *dev); extern void pci_dev_put(struct pci_dev *dev); extern void pci_remove_bus(struct pci_bus *b); -extern void pci_remove_bus_device(struct pci_dev *dev); +extern void __pci_remove_bus_device(struct pci_dev *dev); +extern void pci_stop_and_remove_bus_device(struct pci_dev *dev); extern void pci_stop_bus_device(struct pci_dev *dev); void pci_setup_cardbus(struct pci_bus *bus); extern void pci_sort_breadthfirst(void); @@ -817,6 +814,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq); int pcie_get_mps(struct pci_dev *dev); int pcie_set_mps(struct pci_dev *dev, int mps); int __pci_reset_function(struct pci_dev *dev); +int __pci_reset_function_locked(struct pci_dev *dev); int pci_reset_function(struct pci_dev *dev); void pci_update_resource(struct pci_dev *dev, int resno); int __must_check pci_assign_resource(struct pci_dev *dev, int i); @@ -882,6 +880,7 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev); /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); #ifdef CONFIG_HOTPLUG +unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge); unsigned int pci_rescan_bus(struct pci_bus *bus); #endif @@ -891,13 +890,13 @@ ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void int pci_vpd_truncate(struct pci_dev *dev, size_t size); /* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */ +resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx); void pci_bus_assign_resources(const struct pci_bus *bus); void pci_bus_size_bridges(struct pci_bus *bus); int pci_claim_resource(struct pci_dev *, int); void pci_assign_unassigned_resources(void); void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge); void pdev_enable_device(struct pci_dev *); -void pdev_sort_resources(struct pci_dev *, struct resource_list *); int pci_enable_resources(struct pci_dev *, int mask); void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *), int (*)(const struct pci_dev *, u8, u8)); @@ -914,6 +913,8 @@ void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ void pci_add_resource(struct list_head *resources, struct resource *res); +void pci_add_resource_offset(struct list_head *resources, struct resource *res, + resource_size_t offset); void pci_free_resource_list(struct list_head *resources); void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags); struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n); @@ -959,7 +960,7 @@ void pci_unregister_driver(struct pci_driver *dev); module_driver(__pci_driver, pci_register_driver, \ pci_unregister_driver) -void pci_remove_behind_bridge(struct pci_dev *dev); +void pci_stop_and_remove_behind_bridge(struct pci_dev *dev); struct pci_driver *pci_dev_driver(const struct pci_dev *dev); int pci_add_dynid(struct pci_driver *drv, unsigned int vendor, unsigned int device, @@ -1395,7 +1396,10 @@ static inline void pci_resource_to_user(const struct pci_dev *dev, int bar, */ struct pci_fixup { - u16 vendor, device; /* You can use PCI_ANY_ID here of course */ + u16 vendor; /* You can use PCI_ANY_ID here of course */ + u16 device; /* You can use PCI_ANY_ID here of course */ + u32 class; /* You can use PCI_ANY_ID here too */ + unsigned int class_shift; /* should be 0, 8, 16 */ void (*hook)(struct pci_dev *dev); }; @@ -1410,30 +1414,68 @@ enum pci_fixup_pass { }; /* Anonymous variables would be nice... */ -#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \ - static const struct pci_fixup __pci_fixup_##name __used \ - __attribute__((__section__(#section))) = { vendor, device, hook }; +#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \ + class_shift, hook) \ + static const struct pci_fixup const __pci_fixup_##name __used \ + __attribute__((__section__(#section), aligned((sizeof(void *))))) \ + = { vendor, device, class, class_shift, hook }; + +#define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ + resume##vendor##device##hook, vendor, device, class, \ + class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ + resume_early##vendor##device##hook, vendor, device, \ + class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ + suspend##vendor##device##hook, vendor, device, class, \ + class_shift, hook) + #define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ - resume##vendor##device##hook, vendor, device, hook) + resume##vendor##device##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ - resume_early##vendor##device##hook, vendor, device, hook) + resume_early##vendor##device##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ - suspend##vendor##device##hook, vendor, device, hook) + suspend##vendor##device##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); @@ -1660,6 +1702,13 @@ static inline void pci_set_bus_of_node(struct pci_bus *bus) { } static inline void pci_release_bus_of_node(struct pci_bus *bus) { } #endif /* CONFIG_OF */ +#ifdef CONFIG_EEH +static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev) +{ + return pdev->dev.archdata.edev; +} +#endif + /** * pci_find_upstream_pcie_bridge - find upstream PCIe-to-PCI bridge of a device * @pdev: the PCI device diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index e41a10f5ae83..4b608f543412 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -391,6 +391,7 @@ #define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ #define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ #define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */ #define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ #define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index bd9f55a5958d..ddbb6a901f65 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -299,18 +299,31 @@ struct perf_event_mmap_page { /* * Bits needed to read the hw events in user-space. * - * u32 seq; - * s64 count; + * u32 seq, time_mult, time_shift, idx, width; + * u64 count, enabled, running; + * u64 cyc, time_offset; + * s64 pmc = 0; * * do { * seq = pc->lock; - * * barrier() - * if (pc->index) { - * count = pmc_read(pc->index - 1); - * count += pc->offset; - * } else - * goto regular_read; + * + * enabled = pc->time_enabled; + * running = pc->time_running; + * + * if (pc->cap_usr_time && enabled != running) { + * cyc = rdtsc(); + * time_offset = pc->time_offset; + * time_mult = pc->time_mult; + * time_shift = pc->time_shift; + * } + * + * idx = pc->index; + * count = pc->offset; + * if (pc->cap_usr_rdpmc && idx) { + * width = pc->pmc_width; + * pmc = rdpmc(idx - 1); + * } * * barrier(); * } while (pc->lock != seq); @@ -323,14 +336,57 @@ struct perf_event_mmap_page { __s64 offset; /* add to hardware event value */ __u64 time_enabled; /* time event active */ __u64 time_running; /* time event on cpu */ - __u32 time_mult, time_shift; + union { + __u64 capabilities; + __u64 cap_usr_time : 1, + cap_usr_rdpmc : 1, + cap_____res : 62; + }; + + /* + * If cap_usr_rdpmc this field provides the bit-width of the value + * read using the rdpmc() or equivalent instruction. This can be used + * to sign extend the result like: + * + * pmc <<= 64 - width; + * pmc >>= 64 - width; // signed shift right + * count += pmc; + */ + __u16 pmc_width; + + /* + * If cap_usr_time the below fields can be used to compute the time + * delta since time_enabled (in ns) using rdtsc or similar. + * + * u64 quot, rem; + * u64 delta; + * + * quot = (cyc >> time_shift); + * rem = cyc & ((1 << time_shift) - 1); + * delta = time_offset + quot * time_mult + + * ((rem * time_mult) >> time_shift); + * + * Where time_offset,time_mult,time_shift and cyc are read in the + * seqcount loop described above. This delta can then be added to + * enabled and possible running (if idx), improving the scaling: + * + * enabled += delta; + * if (idx) + * running += delta; + * + * quot = count / running; + * rem = count % running; + * count = quot * enabled + (rem * enabled) / running; + */ + __u16 time_shift; + __u32 time_mult; __u64 time_offset; /* * Hole for extension of the self monitor capabilities */ - __u64 __reserved[121]; /* align to 1k */ + __u64 __reserved[120]; /* align to 1k */ /* * Control data for the mmap() data buffer. @@ -550,6 +606,7 @@ struct perf_guest_info_callbacks { #include <linux/irq_work.h> #include <linux/static_key.h> #include <linux/atomic.h> +#include <linux/sysfs.h> #include <asm/local.h> #define PERF_MAX_STACK_DEPTH 255 @@ -1291,5 +1348,18 @@ do { \ register_cpu_notifier(&fn##_nb); \ } while (0) + +#define PMU_FORMAT_ATTR(_name, _format) \ +static ssize_t \ +_name##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *page) \ +{ \ + BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE); \ + return sprintf(page, _format "\n"); \ +} \ + \ +static struct device_attribute format_attr_##_name = __ATTR_RO(_name) + #endif /* __KERNEL__ */ #endif /* _LINUX_PERF_EVENT_H */ diff --git a/include/linux/phy.h b/include/linux/phy.h index c599f7eca1e7..6fe0a37d4abf 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -19,7 +19,6 @@ #define __PHY_H #include <linux/spinlock.h> -#include <linux/device.h> #include <linux/ethtool.h> #include <linux/mii.h> #include <linux/timer.h> @@ -88,6 +87,9 @@ typedef enum { IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ #define MII_ADDR_C45 (1<<30) +struct device; +struct sk_buff; + /* * The Bus class for PHYs. Devices which provide access to * PHYs should register using this structure @@ -241,7 +243,6 @@ enum phy_state { PHY_RESUMING }; -struct sk_buff; /* phy_device: An instance of a PHY * diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index e7cf6669ac34..b067bd8c49d0 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -2,6 +2,7 @@ #define _LINUX_PID_NS_H #include <linux/sched.h> +#include <linux/bug.h> #include <linux/mm.h> #include <linux/threads.h> #include <linux/nsproxy.h> @@ -32,6 +33,7 @@ struct pid_namespace { #endif gid_t pid_gid; int hide_pid; + int reboot; /* group exit code if this pidns was rebooted */ }; extern struct pid_namespace init_pid_ns; @@ -47,6 +49,7 @@ static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns) extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns); extern void free_pid_ns(struct kref *kref); extern void zap_pid_ns_processes(struct pid_namespace *pid_ns); +extern int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd); static inline void put_pid_ns(struct pid_namespace *ns) { @@ -74,11 +77,15 @@ static inline void put_pid_ns(struct pid_namespace *ns) { } - static inline void zap_pid_ns_processes(struct pid_namespace *ns) { BUG(); } + +static inline int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd) +{ + return 0; +} #endif /* CONFIG_PID_NS */ extern struct pid_namespace *task_active_pid_ns(struct task_struct *tsk); diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h new file mode 100644 index 000000000000..191e72688481 --- /dev/null +++ b/include/linux/pinctrl/consumer.h @@ -0,0 +1,159 @@ +/* + * Consumer interface the pin control subsystem + * + * Copyright (C) 2012 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINCTRL_CONSUMER_H +#define __LINUX_PINCTRL_CONSUMER_H + +#include <linux/err.h> +#include <linux/list.h> +#include <linux/seq_file.h> +#include "pinctrl-state.h" + +/* This struct is private to the core and should be regarded as a cookie */ +struct pinctrl; +struct pinctrl_state; + +#ifdef CONFIG_PINCTRL + +/* External interface to pin control */ +extern int pinctrl_request_gpio(unsigned gpio); +extern void pinctrl_free_gpio(unsigned gpio); +extern int pinctrl_gpio_direction_input(unsigned gpio); +extern int pinctrl_gpio_direction_output(unsigned gpio); + +extern struct pinctrl * __must_check pinctrl_get(struct device *dev); +extern void pinctrl_put(struct pinctrl *p); +extern struct pinctrl_state * __must_check pinctrl_lookup_state( + struct pinctrl *p, + const char *name); +extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s); + +#else /* !CONFIG_PINCTRL */ + +static inline int pinctrl_request_gpio(unsigned gpio) +{ + return 0; +} + +static inline void pinctrl_free_gpio(unsigned gpio) +{ +} + +static inline int pinctrl_gpio_direction_input(unsigned gpio) +{ + return 0; +} + +static inline int pinctrl_gpio_direction_output(unsigned gpio) +{ + return 0; +} + +static inline struct pinctrl * __must_check pinctrl_get(struct device *dev) +{ + return NULL; +} + +static inline void pinctrl_put(struct pinctrl *p) +{ +} + +static inline struct pinctrl_state * __must_check pinctrl_lookup_state( + struct pinctrl *p, + const char *name) +{ + return NULL; +} + +static inline int pinctrl_select_state(struct pinctrl *p, + struct pinctrl_state *s) +{ + return 0; +} + +#endif /* CONFIG_PINCTRL */ + +static inline struct pinctrl * __must_check pinctrl_get_select( + struct device *dev, const char *name) +{ + struct pinctrl *p; + struct pinctrl_state *s; + int ret; + + p = pinctrl_get(dev); + if (IS_ERR(p)) + return p; + + s = pinctrl_lookup_state(p, name); + if (IS_ERR(s)) { + pinctrl_put(p); + return ERR_PTR(PTR_ERR(s)); + } + + ret = pinctrl_select_state(p, s); + if (ret < 0) { + pinctrl_put(p); + return ERR_PTR(ret); + } + + return p; +} + +static inline struct pinctrl * __must_check pinctrl_get_select_default( + struct device *dev) +{ + return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT); +} + +#ifdef CONFIG_PINCONF + +extern int pin_config_get(const char *dev_name, const char *name, + unsigned long *config); +extern int pin_config_set(const char *dev_name, const char *name, + unsigned long config); +extern int pin_config_group_get(const char *dev_name, + const char *pin_group, + unsigned long *config); +extern int pin_config_group_set(const char *dev_name, + const char *pin_group, + unsigned long config); + +#else + +static inline int pin_config_get(const char *dev_name, const char *name, + unsigned long *config) +{ + return 0; +} + +static inline int pin_config_set(const char *dev_name, const char *name, + unsigned long config) +{ + return 0; +} + +static inline int pin_config_group_get(const char *dev_name, + const char *pin_group, + unsigned long *config) +{ + return 0; +} + +static inline int pin_config_group_set(const char *dev_name, + const char *pin_group, + unsigned long config) +{ + return 0; +} + +#endif + +#endif /* __LINUX_PINCTRL_CONSUMER_H */ diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h index d0aecb7f6fb9..fee4349364f7 100644 --- a/include/linux/pinctrl/machine.h +++ b/include/linux/pinctrl/machine.h @@ -9,87 +9,153 @@ * * License terms: GNU General Public License (GPL) version 2 */ -#ifndef __LINUX_PINMUX_MACHINE_H -#define __LINUX_PINMUX_MACHINE_H +#ifndef __LINUX_PINCTRL_MACHINE_H +#define __LINUX_PINCTRL_MACHINE_H + +#include "pinctrl-state.h" + +enum pinctrl_map_type { + PIN_MAP_TYPE_INVALID, + PIN_MAP_TYPE_DUMMY_STATE, + PIN_MAP_TYPE_MUX_GROUP, + PIN_MAP_TYPE_CONFIGS_PIN, + PIN_MAP_TYPE_CONFIGS_GROUP, +}; + +/** + * struct pinctrl_map_mux - mapping table content for MAP_TYPE_MUX_GROUP + * @group: the name of the group whose mux function is to be configured. This + * field may be left NULL, and the first applicable group for the function + * will be used. + * @function: the mux function to select for the group + */ +struct pinctrl_map_mux { + const char *group; + const char *function; +}; /** - * struct pinmux_map - boards/machines shall provide this map for devices + * struct pinctrl_map_configs - mapping table content for MAP_TYPE_CONFIGS_* + * @group_or_pin: the name of the pin or group whose configuration parameters + * are to be configured. + * @configs: a pointer to an array of config parameters/values to program into + * hardware. Each individual pin controller defines the format and meaning + * of config parameters. + * @num_configs: the number of entries in array @configs + */ +struct pinctrl_map_configs { + const char *group_or_pin; + unsigned long *configs; + unsigned num_configs; +}; + +/** + * struct pinctrl_map - boards/machines shall provide this map for devices + * @dev_name: the name of the device using this specific mapping, the name + * must be the same as in your struct device*. If this name is set to the + * same name as the pin controllers own dev_name(), the map entry will be + * hogged by the driver itself upon registration * @name: the name of this specific map entry for the particular machine. - * This is the second parameter passed to pinmux_get() when you want - * to have several mappings to the same device - * @ctrl_dev: the pin control device to be used by this mapping, may be NULL - * if you provide .ctrl_dev_name instead (this is more common) + * This is the parameter passed to pinmux_lookup_state() + * @type: the type of mapping table entry * @ctrl_dev_name: the name of the device controlling this specific mapping, - * the name must be the same as in your struct device*, may be NULL if - * you provide .ctrl_dev instead - * @function: a function in the driver to use for this mapping, the driver - * will lookup the function referenced by this ID on the specified - * pin control device - * @group: sometimes a function can map to different pin groups, so this - * selects a certain specific pin group to activate for the function, if - * left as NULL, the first applicable group will be used - * @dev: the device using this specific mapping, may be NULL if you provide - * .dev_name instead (this is more common) - * @dev_name: the name of the device using this specific mapping, the name - * must be the same as in your struct device*, may be NULL if you - * provide .dev instead - * @hog_on_boot: if this is set to true, the pin control subsystem will itself - * hog the mappings as the pinmux device drivers are attached, so this is - * typically used with system maps (mux mappings without an assigned - * device) that you want to get hogged and enabled by default as soon as - * a pinmux device supporting it is registered. These maps will not be - * disabled and put until the system shuts down. + * the name must be the same as in your struct device*. This field is not + * used for PIN_MAP_TYPE_DUMMY_STATE + * @data: Data specific to the mapping type */ -struct pinmux_map { +struct pinctrl_map { + const char *dev_name; const char *name; - struct device *ctrl_dev; + enum pinctrl_map_type type; const char *ctrl_dev_name; - const char *function; - const char *group; - struct device *dev; - const char *dev_name; - bool hog_on_boot; + union { + struct pinctrl_map_mux mux; + struct pinctrl_map_configs configs; + } data; }; -/* - * Convenience macro to set a simple map from a certain pin controller and a - * certain function to a named device - */ -#define PINMUX_MAP(a, b, c, d) \ - { .name = a, .ctrl_dev_name = b, .function = c, .dev_name = d } +/* Convenience macros to create mapping table entries */ -/* - * Convenience macro to map a system function onto a certain pinctrl device. - * System functions are not assigned to a particular device. - */ -#define PINMUX_MAP_SYS(a, b, c) \ - { .name = a, .ctrl_dev_name = b, .function = c } +#define PIN_MAP_DUMMY_STATE(dev, state) \ + { \ + .dev_name = dev, \ + .name = state, \ + .type = PIN_MAP_TYPE_DUMMY_STATE, \ + } -/* - * Convenience macro to map a system function onto a certain pinctrl device, - * to be hogged by the pinmux core until the system shuts down. - */ -#define PINMUX_MAP_SYS_HOG(a, b, c) \ - { .name = a, .ctrl_dev_name = b, .function = c, \ - .hog_on_boot = true } +#define PIN_MAP_MUX_GROUP(dev, state, pinctrl, grp, func) \ + { \ + .dev_name = dev, \ + .name = state, \ + .type = PIN_MAP_TYPE_MUX_GROUP, \ + .ctrl_dev_name = pinctrl, \ + .data.mux = { \ + .group = grp, \ + .function = func, \ + }, \ + } -/* - * Convenience macro to map a system function onto a certain pinctrl device - * using a specified group, to be hogged by the pinmux core until the system - * shuts down. - */ -#define PINMUX_MAP_SYS_HOG_GROUP(a, b, c, d) \ - { .name = a, .ctrl_dev_name = b, .function = c, .group = d, \ - .hog_on_boot = true } +#define PIN_MAP_MUX_GROUP_DEFAULT(dev, pinctrl, grp, func) \ + PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, func) + +#define PIN_MAP_MUX_GROUP_HOG(dev, state, grp, func) \ + PIN_MAP_MUX_GROUP(dev, state, dev, grp, func) + +#define PIN_MAP_MUX_GROUP_HOG_DEFAULT(dev, grp, func) \ + PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, func) + +#define PIN_MAP_CONFIGS_PIN(dev, state, pinctrl, pin, cfgs) \ + { \ + .dev_name = dev, \ + .name = state, \ + .type = PIN_MAP_TYPE_CONFIGS_PIN, \ + .ctrl_dev_name = pinctrl, \ + .data.configs = { \ + .group_or_pin = pin, \ + .configs = cfgs, \ + .num_configs = ARRAY_SIZE(cfgs), \ + }, \ + } + +#define PIN_MAP_CONFIGS_PIN_DEFAULT(dev, pinctrl, pin, cfgs) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, pinctrl, pin, cfgs) + +#define PIN_MAP_CONFIGS_PIN_HOG(dev, state, pin, cfgs) \ + PIN_MAP_CONFIGS_PIN(dev, state, dev, pin, cfgs) + +#define PIN_MAP_CONFIGS_PIN_HOG_DEFAULT(dev, pin, cfgs) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, dev, pin, cfgs) + +#define PIN_MAP_CONFIGS_GROUP(dev, state, pinctrl, grp, cfgs) \ + { \ + .dev_name = dev, \ + .name = state, \ + .type = PIN_MAP_TYPE_CONFIGS_GROUP, \ + .ctrl_dev_name = pinctrl, \ + .data.configs = { \ + .group_or_pin = grp, \ + .configs = cfgs, \ + .num_configs = ARRAY_SIZE(cfgs), \ + }, \ + } + +#define PIN_MAP_CONFIGS_GROUP_DEFAULT(dev, pinctrl, grp, cfgs) \ + PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, cfgs) + +#define PIN_MAP_CONFIGS_GROUP_HOG(dev, state, grp, cfgs) \ + PIN_MAP_CONFIGS_GROUP(dev, state, dev, grp, cfgs) + +#define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs) \ + PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs) #ifdef CONFIG_PINMUX -extern int pinmux_register_mappings(struct pinmux_map const *map, +extern int pinctrl_register_mappings(struct pinctrl_map const *map, unsigned num_maps); #else -static inline int pinmux_register_mappings(struct pinmux_map const *map, +static inline int pinctrl_register_mappings(struct pinctrl_map const *map, unsigned num_maps) { return 0; diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h new file mode 100644 index 000000000000..4f0abb9f1c09 --- /dev/null +++ b/include/linux/pinctrl/pinconf-generic.h @@ -0,0 +1,114 @@ +/* + * Interface the generic pinconfig portions of the pinctrl subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * This interface is used in the core to keep track of pins. + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H +#define __LINUX_PINCTRL_PINCONF_GENERIC_H + +/* + * You shouldn't even be able to compile with these enums etc unless you're + * using generic pin config. That is why this is defined out. + */ +#ifdef CONFIG_GENERIC_PINCONF + +/** + * enum pin_config_param - possible pin configuration parameters + * @PIN_CONFIG_BIAS_DISABLE: disable any pin bias on the pin, a + * transition from say pull-up to pull-down implies that you disable + * pull-up in the process, this setting disables all biasing. + * @PIN_CONFIG_BIAS_HIGH_IMPEDANCE: the pin will be set to a high impedance + * mode, also know as "third-state" (tristate) or "high-Z" or "floating". + * On output pins this effectively disconnects the pin, which is useful + * if for example some other pin is going to drive the signal connected + * to it for a while. Pins used for input are usually always high + * impedance. + * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high + * impedance to VDD). If the argument is != 0 pull-up is enabled, + * if it is 0, pull-up is disabled. + * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high + * impedance to GROUND). If the argument is != 0 pull-down is enabled, + * if it is 0, pull-down is disabled. + * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and + * low, this is the most typical case and is typically achieved with two + * active transistors on the output. Sending this config will enabale + * push-pull mode, the argument is ignored. + * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open + * collector) which means it is usually wired with other output ports + * which are then pulled up with an external resistor. Sending this + * config will enabale open drain mode, the argument is ignored. + * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source + * (open emitter). Sending this config will enabale open drain mode, the + * argument is ignored. + * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in + * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, + * the threshold value is given on a custom format as argument when + * setting pins to this mode. The argument zero turns the schmitt trigger + * off. + * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode, + * which means it will wait for signals to settle when reading inputs. The + * argument gives the debounce time on a custom format. Setting the + * argument to zero turns debouncing off. + * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power + * supplies, the argument to this parameter (on a custom format) tells + * the driver which alternative power source to use. + * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power + * operation, if several modes of operation are supported these can be + * passed in the argument on a custom form, else just use argument 1 + * to indicate low power mode, argument 0 turns low power mode off. + * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if + * you need to pass in custom configurations to the pin controller, use + * PIN_CONFIG_END+1 as the base offset. + */ +enum pin_config_param { + PIN_CONFIG_BIAS_DISABLE, + PIN_CONFIG_BIAS_HIGH_IMPEDANCE, + PIN_CONFIG_BIAS_PULL_UP, + PIN_CONFIG_BIAS_PULL_DOWN, + PIN_CONFIG_DRIVE_PUSH_PULL, + PIN_CONFIG_DRIVE_OPEN_DRAIN, + PIN_CONFIG_DRIVE_OPEN_SOURCE, + PIN_CONFIG_INPUT_SCHMITT, + PIN_CONFIG_INPUT_DEBOUNCE, + PIN_CONFIG_POWER_SOURCE, + PIN_CONFIG_LOW_POWER_MODE, + PIN_CONFIG_END = 0x7FFF, +}; + +/* + * Helpful configuration macro to be used in tables etc. + */ +#define PIN_CONF_PACKED(p, a) ((a << 16) | ((unsigned long) p & 0xffffUL)) + +/* + * The following inlines stuffs a configuration parameter and data value + * into and out of an unsigned long argument, as used by the generic pin config + * system. We put the parameter in the lower 16 bits and the argument in the + * upper 16 bits. + */ + +static inline enum pin_config_param pinconf_to_config_param(unsigned long config) +{ + return (enum pin_config_param) (config & 0xffffUL); +} + +static inline u16 pinconf_to_config_argument(unsigned long config) +{ + return (enum pin_config_param) ((config >> 16) & 0xffffUL); +} + +static inline unsigned long pinconf_to_config_packed(enum pin_config_param param, + u16 argument) +{ + return PIN_CONF_PACKED(param, argument); +} + +#endif /* CONFIG_GENERIC_PINCONF */ + +#endif /* __LINUX_PINCTRL_PINCONF_GENERIC_H */ diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h index 477922cf043a..ec431f03362d 100644 --- a/include/linux/pinctrl/pinconf.h +++ b/include/linux/pinctrl/pinconf.h @@ -20,6 +20,8 @@ struct seq_file; /** * struct pinconf_ops - pin config operations, to be implemented by * pin configuration capable drivers. + * @is_generic: for pin controllers that want to use the generic interface, + * this flag tells the framework that it's generic. * @pin_config_get: get the config of a certain pin, if the requested config * is not available on this controller this should return -ENOTSUPP * and if it is available but disabled it should return -EINVAL @@ -33,6 +35,9 @@ struct seq_file; * per-device info for a certain group in debugfs */ struct pinconf_ops { +#ifdef CONFIG_GENERIC_PINCONF + bool is_generic; +#endif int (*pin_config_get) (struct pinctrl_dev *pctldev, unsigned pin, unsigned long *config); @@ -53,45 +58,6 @@ struct pinconf_ops { unsigned selector); }; -extern int pin_config_get(const char *dev_name, const char *name, - unsigned long *config); -extern int pin_config_set(const char *dev_name, const char *name, - unsigned long config); -extern int pin_config_group_get(const char *dev_name, - const char *pin_group, - unsigned long *config); -extern int pin_config_group_set(const char *dev_name, - const char *pin_group, - unsigned long config); - -#else - -static inline int pin_config_get(const char *dev_name, const char *name, - unsigned long *config) -{ - return 0; -} - -static inline int pin_config_set(const char *dev_name, const char *name, - unsigned long config) -{ - return 0; -} - -static inline int pin_config_group_get(const char *dev_name, - const char *pin_group, - unsigned long *config) -{ - return 0; -} - -static inline int pin_config_group_set(const char *dev_name, - const char *pin_group, - unsigned long config) -{ - return 0; -} - #endif #endif /* __LINUX_PINCTRL_PINCONF_H */ diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h new file mode 100644 index 000000000000..3920e28b4da7 --- /dev/null +++ b/include/linux/pinctrl/pinctrl-state.h @@ -0,0 +1,6 @@ +/* + * Standard pin control state definitions + */ + +#define PINCTRL_STATE_DEFAULT "default" +#define PINCTRL_STATE_IDLE "idle" diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 8bd22ee7aa09..4e9f0788c221 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -15,10 +15,11 @@ #ifdef CONFIG_PINCTRL #include <linux/radix-tree.h> -#include <linux/spinlock.h> #include <linux/list.h> #include <linux/seq_file.h> +#include "pinctrl-state.h" +struct device; struct pinctrl_dev; struct pinmux_ops; struct pinconf_ops; diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h index 937b3e2fa36f..47e9237edd47 100644 --- a/include/linux/pinctrl/pinmux.h +++ b/include/linux/pinctrl/pinmux.h @@ -16,9 +16,6 @@ #include <linux/seq_file.h> #include "pinctrl.h" -/* This struct is private to the core and should be regarded as a cookie */ -struct pinmux; - #ifdef CONFIG_PINMUX struct pinctrl_dev; @@ -88,55 +85,6 @@ struct pinmux_ops { bool input); }; -/* External interface to pinmux */ -extern int pinmux_request_gpio(unsigned gpio); -extern void pinmux_free_gpio(unsigned gpio); -extern int pinmux_gpio_direction_input(unsigned gpio); -extern int pinmux_gpio_direction_output(unsigned gpio); -extern struct pinmux * __must_check pinmux_get(struct device *dev, const char *name); -extern void pinmux_put(struct pinmux *pmx); -extern int pinmux_enable(struct pinmux *pmx); -extern void pinmux_disable(struct pinmux *pmx); - -#else /* !CONFIG_PINMUX */ - -static inline int pinmux_request_gpio(unsigned gpio) -{ - return 0; -} - -static inline void pinmux_free_gpio(unsigned gpio) -{ -} - -static inline int pinmux_gpio_direction_input(unsigned gpio) -{ - return 0; -} - -static inline int pinmux_gpio_direction_output(unsigned gpio) -{ - return 0; -} - -static inline struct pinmux * __must_check pinmux_get(struct device *dev, const char *name) -{ - return NULL; -} - -static inline void pinmux_put(struct pinmux *pmx) -{ -} - -static inline int pinmux_enable(struct pinmux *pmx) -{ - return 0; -} - -static inline void pinmux_disable(struct pinmux *pmx) -{ -} - #endif /* CONFIG_PINMUX */ #endif /* __LINUX_PINCTRL_PINMUX_H */ diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 77257c92155a..6d626ff0cfd0 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -1,8 +1,6 @@ #ifndef _LINUX_PIPE_FS_I_H #define _LINUX_PIPE_FS_I_H -#define PIPEFS_MAGIC 0x50495045 - #define PIPE_DEF_BUFFERS 16 #define PIPE_BUF_FLAG_LRU 0x01 /* page is on the LRU */ diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h new file mode 100644 index 000000000000..b0f2c56a8ea2 --- /dev/null +++ b/include/linux/platform_data/atmel.h @@ -0,0 +1,27 @@ +/* + * atmel platform data + * + * GPL v2 Only + */ + +#ifndef __ATMEL_H__ +#define __ATMEL_H__ + +#include <linux/mtd/nand.h> + + /* NAND / SmartMedia */ +struct atmel_nand_data { + int enable_pin; /* chip enable */ + int det_pin; /* card detect */ + int rdy_pin; /* ready/busy */ + u8 rdy_pin_active_low; /* rdy_pin value is inverted */ + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 bus_width_16; /* buswidth is 16 bit */ + u8 ecc_mode; /* ecc mode */ + u8 on_flash_bbt; /* bbt on flash */ + struct mtd_partition *parts; + unsigned int num_parts; +}; + +#endif /* __ATMEL_H__ */ diff --git a/include/linux/platform_data/omap-abe-twl6040.h b/include/linux/platform_data/omap-abe-twl6040.h new file mode 100644 index 000000000000..5d298ac10fc2 --- /dev/null +++ b/include/linux/platform_data/omap-abe-twl6040.h @@ -0,0 +1,49 @@ +/** + * omap-abe-twl6040.h - ASoC machine driver OMAP4+ devices, header. + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _OMAP_ABE_TWL6040_H_ +#define _OMAP_ABE_TWL6040_H_ + +/* To select if only one channel is connected in a stereo port */ +#define ABE_TWL6040_LEFT (1 << 0) +#define ABE_TWL6040_RIGHT (1 << 1) + +struct omap_abe_twl6040_data { + char *card_name; + /* Feature flags for connected audio pins */ + u8 has_hs; + u8 has_hf; + bool has_ep; + u8 has_aux; + u8 has_vibra; + bool has_dmic; + bool has_hsmic; + bool has_mainmic; + bool has_submic; + u8 has_afm; + /* Other features */ + bool jack_detection; /* board can detect jack events */ + int mclk_freq; /* MCLK frequency speed for twl6040 */ +}; + +#endif /* _OMAP_ABE_TWL6040_H_ */ diff --git a/include/linux/platform_data/omap4-keypad.h b/include/linux/platform_data/omap4-keypad.h new file mode 100644 index 000000000000..4eef5fb05a17 --- /dev/null +++ b/include/linux/platform_data/omap4-keypad.h @@ -0,0 +1,13 @@ +#ifndef __LINUX_INPUT_OMAP4_KEYPAD_H +#define __LINUX_INPUT_OMAP4_KEYPAD_H + +#include <linux/input/matrix_keypad.h> + +struct omap4_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + + u8 rows; + u8 cols; +}; + +#endif /* __LINUX_INPUT_OMAP4_KEYPAD_H */ diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h new file mode 100644 index 000000000000..724f2e1cbbcb --- /dev/null +++ b/include/linux/platform_data/spear_thermal.h @@ -0,0 +1,26 @@ +/* + * SPEAr thermal driver platform data. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino <vincenzo.frascino@st.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef SPEAR_THERMAL_H +#define SPEAR_THERMAL_H + +/* SPEAr Thermal Sensor Platform Data */ +struct spear_thermal_pdata { + /* flags used to enable thermal sensor */ + unsigned int thermal_flags; +}; + +#endif /* SPEAR_THERMAL_H */ diff --git a/include/linux/platform_data/tegra_emc.h b/include/linux/platform_data/tegra_emc.h new file mode 100644 index 000000000000..df67505e98f8 --- /dev/null +++ b/include/linux/platform_data/tegra_emc.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2011 Google, Inc. + * + * Author: + * Colin Cross <ccross@android.com> + * Olof Johansson <olof@lixom.net> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __TEGRA_EMC_H_ +#define __TEGRA_EMC_H_ + +#define TEGRA_EMC_NUM_REGS 46 + +struct tegra_emc_table { + unsigned long rate; + u32 regs[TEGRA_EMC_NUM_REGS]; +}; + +struct tegra_emc_pdata { + int num_tables; + struct tegra_emc_table *tables; +}; + +#endif diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 1236d262b3e8..91f8286106ea 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -10,6 +10,8 @@ #define _LINUX_PM_DOMAIN_H #include <linux/device.h> +#include <linux/mutex.h> +#include <linux/pm.h> #include <linux/err.h> #include <linux/of.h> diff --git a/include/linux/poll.h b/include/linux/poll.h index cf40010ce0cd..48fe8bc398d1 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -32,21 +32,46 @@ struct poll_table_struct; */ typedef void (*poll_queue_proc)(struct file *, wait_queue_head_t *, struct poll_table_struct *); +/* + * Do not touch the structure directly, use the access functions + * poll_does_not_wait() and poll_requested_events() instead. + */ typedef struct poll_table_struct { - poll_queue_proc qproc; - unsigned long key; + poll_queue_proc _qproc; + unsigned long _key; } poll_table; static inline void poll_wait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p) { - if (p && wait_address) - p->qproc(filp, wait_address, p); + if (p && p->_qproc && wait_address) + p->_qproc(filp, wait_address, p); +} + +/* + * Return true if it is guaranteed that poll will not wait. This is the case + * if the poll() of another file descriptor in the set got an event, so there + * is no need for waiting. + */ +static inline bool poll_does_not_wait(const poll_table *p) +{ + return p == NULL || p->_qproc == NULL; +} + +/* + * Return the set of events that the application wants to poll for. + * This is useful for drivers that need to know whether a DMA transfer has + * to be started implicitly on poll(). You typically only want to do that + * if the application is actually polling for POLLIN and/or POLLOUT. + */ +static inline unsigned long poll_requested_events(const poll_table *p) +{ + return p ? p->_key : ~0UL; } static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc) { - pt->qproc = qproc; - pt->key = ~0UL; /* all events enabled */ + pt->_qproc = qproc; + pt->_key = ~0UL; /* all events enabled */ } struct poll_table_entry { diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h index b7681102a4b9..11bad91c4433 100644 --- a/include/linux/posix_acl.h +++ b/include/linux/posix_acl.h @@ -8,6 +8,7 @@ #ifndef __LINUX_POSIX_ACL_H #define __LINUX_POSIX_ACL_H +#include <linux/bug.h> #include <linux/slab.h> #include <linux/rcupdate.h> diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h index fe99211fb2b8..e01b167e66f0 100644 --- a/include/linux/power/max17042_battery.h +++ b/include/linux/power/max17042_battery.h @@ -27,6 +27,8 @@ #define MAX17042_BATTERY_FULL (100) #define MAX17042_DEFAULT_SNS_RESISTOR (10000) +#define MAX17042_CHARACTERIZATION_DATA_SIZE 48 + enum max17042_register { MAX17042_STATUS = 0x00, MAX17042_VALRT_Th = 0x01, @@ -40,11 +42,11 @@ enum max17042_register { MAX17042_VCELL = 0x09, MAX17042_Current = 0x0A, MAX17042_AvgCurrent = 0x0B, - MAX17042_Qresidual = 0x0C, + MAX17042_SOC = 0x0D, MAX17042_AvSOC = 0x0E, MAX17042_RemCap = 0x0F, - MAX17402_FullCAP = 0x10, + MAX17042_FullCAP = 0x10, MAX17042_TTE = 0x11, MAX17042_V_empty = 0x12, @@ -62,14 +64,14 @@ enum max17042_register { MAX17042_AvCap = 0x1F, MAX17042_ManName = 0x20, MAX17042_DevName = 0x21, - MAX17042_DevChem = 0x22, + MAX17042_FullCAPNom = 0x23, MAX17042_TempNom = 0x24, - MAX17042_TempCold = 0x25, + MAX17042_TempLim = 0x25, MAX17042_TempHot = 0x26, MAX17042_AIN = 0x27, MAX17042_LearnCFG = 0x28, - MAX17042_SHFTCFG = 0x29, + MAX17042_FilterCFG = 0x29, MAX17042_RelaxCFG = 0x2A, MAX17042_MiscCFG = 0x2B, MAX17042_TGAIN = 0x2C, @@ -77,22 +79,41 @@ enum max17042_register { MAX17042_CGAIN = 0x2E, MAX17042_COFF = 0x2F, - MAX17042_Q_empty = 0x33, + MAX17042_MaskSOC = 0x32, + MAX17042_SOC_empty = 0x33, MAX17042_T_empty = 0x34, + MAX17042_FullCAP0 = 0x35, + MAX17042_LAvg_empty = 0x36, + MAX17042_FCTC = 0x37, MAX17042_RCOMP0 = 0x38, MAX17042_TempCo = 0x39, - MAX17042_Rx = 0x3A, - MAX17042_T_empty0 = 0x3B, + MAX17042_EmptyTempCo = 0x3A, + MAX17042_K_empty0 = 0x3B, MAX17042_TaskPeriod = 0x3C, MAX17042_FSTAT = 0x3D, MAX17042_SHDNTIMER = 0x3F, - MAX17042_VFRemCap = 0x4A, + MAX17042_dQacc = 0x45, + MAX17042_dPacc = 0x46, + + MAX17042_VFSOC0 = 0x48, MAX17042_QH = 0x4D, MAX17042_QL = 0x4E, + + MAX17042_VFSOC0Enable = 0x60, + MAX17042_MLOCKReg1 = 0x62, + MAX17042_MLOCKReg2 = 0x63, + + MAX17042_MODELChrTbl = 0x80, + + MAX17042_OCV = 0xEE, + + MAX17042_OCVInternal = 0xFB, + + MAX17042_VFSOC = 0xFF, }; /* @@ -105,10 +126,64 @@ struct max17042_reg_data { u16 data; }; +struct max17042_config_data { + /* External current sense resistor value in milli-ohms */ + u32 cur_sense_val; + + /* A/D measurement */ + u16 tgain; /* 0x2C */ + u16 toff; /* 0x2D */ + u16 cgain; /* 0x2E */ + u16 coff; /* 0x2F */ + + /* Alert / Status */ + u16 valrt_thresh; /* 0x01 */ + u16 talrt_thresh; /* 0x02 */ + u16 soc_alrt_thresh; /* 0x03 */ + u16 config; /* 0x01D */ + u16 shdntimer; /* 0x03F */ + + /* App data */ + u16 design_cap; /* 0x18 */ + u16 ichgt_term; /* 0x1E */ + + /* MG3 config */ + u16 at_rate; /* 0x04 */ + u16 learn_cfg; /* 0x28 */ + u16 filter_cfg; /* 0x29 */ + u16 relax_cfg; /* 0x2A */ + u16 misc_cfg; /* 0x2B */ + u16 masksoc; /* 0x32 */ + + /* MG3 save and restore */ + u16 fullcap; /* 0x10 */ + u16 fullcapnom; /* 0x23 */ + u16 socempty; /* 0x33 */ + u16 lavg_empty; /* 0x36 */ + u16 dqacc; /* 0x45 */ + u16 dpacc; /* 0x46 */ + + /* Cell technology from power_supply.h */ + u16 cell_technology; + + /* Cell Data */ + u16 vempty; /* 0x12 */ + u16 temp_nom; /* 0x24 */ + u16 temp_lim; /* 0x25 */ + u16 fctc; /* 0x37 */ + u16 rcomp0; /* 0x38 */ + u16 tcompc0; /* 0x39 */ + u16 empty_tempco; /* 0x3A */ + u16 kempty0; /* 0x3B */ + u16 cell_char_tbl[MAX17042_CHARACTERIZATION_DATA_SIZE]; +} __packed; + struct max17042_platform_data { struct max17042_reg_data *init_data; + struct max17042_config_data *config_data; int num_init_data; /* Number of enties in init_data array */ bool enable_current_sense; + bool enable_por_init; /* Use POR init from Maxim appnote */ /* * R_sns in micro-ohms. diff --git a/include/linux/power/smb347-charger.h b/include/linux/power/smb347-charger.h new file mode 100644 index 000000000000..b3cb20dab55f --- /dev/null +++ b/include/linux/power/smb347-charger.h @@ -0,0 +1,117 @@ +/* + * Summit Microelectronics SMB347 Battery Charger Driver + * + * Copyright (C) 2011, Intel Corporation + * + * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com> + * Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SMB347_CHARGER_H +#define SMB347_CHARGER_H + +#include <linux/types.h> +#include <linux/power_supply.h> + +enum { + /* use the default compensation method */ + SMB347_SOFT_TEMP_COMPENSATE_DEFAULT = -1, + + SMB347_SOFT_TEMP_COMPENSATE_NONE, + SMB347_SOFT_TEMP_COMPENSATE_CURRENT, + SMB347_SOFT_TEMP_COMPENSATE_VOLTAGE, +}; + +/* Use default factory programmed value for hard/soft temperature limit */ +#define SMB347_TEMP_USE_DEFAULT -273 + +/* + * Charging enable can be controlled by software (via i2c) by + * smb347-charger driver or by EN pin (active low/high). + */ +enum smb347_chg_enable { + SMB347_CHG_ENABLE_SW, + SMB347_CHG_ENABLE_PIN_ACTIVE_LOW, + SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH, +}; + +/** + * struct smb347_charger_platform_data - platform data for SMB347 charger + * @battery_info: Information about the battery + * @max_charge_current: maximum current (in uA) the battery can be charged + * @max_charge_voltage: maximum voltage (in uV) the battery can be charged + * @pre_charge_current: current (in uA) to use in pre-charging phase + * @termination_current: current (in uA) used to determine when the + * charging cycle terminates + * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to + * pre-charge to fast charge mode + * @mains_current_limit: maximum input current drawn from AC/DC input (in uA) + * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB + * input + * @chip_temp_threshold: die temperature where device starts limiting charge + * current [%100 - %130] (in degree C) + * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C), + * granularity is 5 deg C. + * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree C), + * granularity is 5 deg C. + * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C), + * granularity is 5 deg C. + * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C), + * granularity is 5 deg C. + * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit + * @soft_temp_limit_compensation: compensation method when soft temperature + * limit is hit + * @charge_current_compensation: current (in uA) for charging compensation + * current when temperature hits soft limits + * @use_mains: AC/DC input can be used + * @use_usb: USB input can be used + * @use_usb_otg: USB OTG output can be used (not implemented yet) + * @irq_gpio: GPIO number used for interrupts (%-1 if not used) + * @enable_control: how charging enable/disable is controlled + * (driver/pin controls) + * + * @use_main, @use_usb, and @use_usb_otg are means to enable/disable + * hardware support for these. This is useful when we want to have for + * example OTG charging controlled via OTG transceiver driver and not by + * the SMB347 hardware. + * + * Hard and soft temperature limit values are given as described in the + * device data sheet and assuming NTC beta value is %3750. Even if this is + * not the case, these values should be used. They can be mapped to the + * corresponding NTC beta values with the help of table %2 in the data + * sheet. So for example if NTC beta is %3375 and we want to program hard + * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50. + * + * If zero value is given in any of the current and voltage values, the + * factory programmed default will be used. For soft/hard temperature + * values, pass in %SMB347_TEMP_USE_DEFAULT instead. + */ +struct smb347_charger_platform_data { + struct power_supply_info battery_info; + unsigned int max_charge_current; + unsigned int max_charge_voltage; + unsigned int pre_charge_current; + unsigned int termination_current; + unsigned int pre_to_fast_voltage; + unsigned int mains_current_limit; + unsigned int usb_hc_current_limit; + unsigned int chip_temp_threshold; + int soft_cold_temp_limit; + int soft_hot_temp_limit; + int hard_cold_temp_limit; + int hard_hot_temp_limit; + bool suspend_on_hard_temp_limit; + unsigned int soft_temp_limit_compensation; + unsigned int charge_current_compensation; + bool use_mains; + bool use_usb; + bool use_usb_otg; + int irq_gpio; + enum smb347_chg_enable enable_control; +}; + +#endif /* SMB347_CHARGER_H */ diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index fa9b962aec12..c38c13db8832 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -13,10 +13,11 @@ #ifndef __LINUX_POWER_SUPPLY_H__ #define __LINUX_POWER_SUPPLY_H__ -#include <linux/device.h> #include <linux/workqueue.h> #include <linux/leds.h> +struct device; + /* * All voltages, currents, charges, energies, time and temperatures in uV, * µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise diff --git a/include/linux/prctl.h b/include/linux/prctl.h index a0413ac3abe8..e0cfec2490aa 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -121,4 +121,7 @@ #define PR_SET_PTRACER 0x59616d61 # define PR_SET_PTRACER_ANY ((unsigned long)-1) +#define PR_SET_CHILD_SUBREAPER 36 +#define PR_GET_CHILD_SUBREAPER 37 + #endif /* _LINUX_PRCTL_H */ diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index c2f1f6a5fcb8..5c719627c2aa 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -51,20 +51,6 @@ #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 -/* flags in @data for PTRACE_SEIZE */ -#define PTRACE_SEIZE_DEVEL 0x80000000 /* temp flag for development */ - -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 -#define PTRACE_O_TRACEFORK 0x00000002 -#define PTRACE_O_TRACEVFORK 0x00000004 -#define PTRACE_O_TRACECLONE 0x00000008 -#define PTRACE_O_TRACEEXEC 0x00000010 -#define PTRACE_O_TRACEVFORKDONE 0x00000020 -#define PTRACE_O_TRACEEXIT 0x00000040 - -#define PTRACE_O_MASK 0x0000007f - /* Wait extended result codes for the above trace options. */ #define PTRACE_EVENT_FORK 1 #define PTRACE_EVENT_VFORK 2 @@ -72,7 +58,19 @@ #define PTRACE_EVENT_EXEC 4 #define PTRACE_EVENT_VFORK_DONE 5 #define PTRACE_EVENT_EXIT 6 -#define PTRACE_EVENT_STOP 7 +/* Extended result codes which enabled by means other than options. */ +#define PTRACE_EVENT_STOP 128 + +/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */ +#define PTRACE_O_TRACESYSGOOD 1 +#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK) +#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK) +#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE) +#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC) +#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE) +#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT) + +#define PTRACE_O_MASK 0x0000007f #include <asm/ptrace.h> @@ -88,13 +86,12 @@ #define PT_SEIZED 0x00010000 /* SEIZE used, enable new behavior */ #define PT_PTRACED 0x00000001 #define PT_DTRACE 0x00000002 /* delayed trace (used on m68k, i386) */ -#define PT_TRACESYSGOOD 0x00000004 -#define PT_PTRACE_CAP 0x00000008 /* ptracer can follow suid-exec */ +#define PT_PTRACE_CAP 0x00000004 /* ptracer can follow suid-exec */ +#define PT_OPT_FLAG_SHIFT 3 /* PT_TRACE_* event enable flags */ -#define PT_EVENT_FLAG_SHIFT 4 -#define PT_EVENT_FLAG(event) (1 << (PT_EVENT_FLAG_SHIFT + (event) - 1)) - +#define PT_EVENT_FLAG(event) (1 << (PT_OPT_FLAG_SHIFT + (event))) +#define PT_TRACESYSGOOD PT_EVENT_FLAG(0) #define PT_TRACE_FORK PT_EVENT_FLAG(PTRACE_EVENT_FORK) #define PT_TRACE_VFORK PT_EVENT_FLAG(PTRACE_EVENT_VFORK) #define PT_TRACE_CLONE PT_EVENT_FLAG(PTRACE_EVENT_CLONE) @@ -102,8 +99,6 @@ #define PT_TRACE_VFORK_DONE PT_EVENT_FLAG(PTRACE_EVENT_VFORK_DONE) #define PT_TRACE_EXIT PT_EVENT_FLAG(PTRACE_EVENT_EXIT) -#define PT_TRACE_MASK 0x000003f4 - /* single stepping state bits (used on ARM and PA-RISC) */ #define PT_SINGLESTEP_BIT 31 #define PT_SINGLESTEP (1<<PT_SINGLESTEP_BIT) @@ -113,6 +108,7 @@ #include <linux/compiler.h> /* For unlikely. */ #include <linux/sched.h> /* For struct task_struct. */ #include <linux/err.h> /* for IS_ERR_VALUE */ +#include <linux/bug.h> /* For BUG_ON. */ extern long arch_ptrace(struct task_struct *child, long request, @@ -199,9 +195,10 @@ static inline void ptrace_event(int event, unsigned long message) if (unlikely(ptrace_event_enabled(current, event))) { current->ptrace_message = message; ptrace_notify((event << 8) | SIGTRAP); - } else if (event == PTRACE_EVENT_EXEC && unlikely(current->ptrace)) { + } else if (event == PTRACE_EVENT_EXEC) { /* legacy EXEC report via SIGTRAP */ - send_sig(SIGTRAP, current, 0); + if ((current->ptrace & (PT_PTRACED|PT_SEIZED)) == PT_PTRACED) + send_sig(SIGTRAP, current, 0); } } diff --git a/include/linux/qnx6_fs.h b/include/linux/qnx6_fs.h new file mode 100644 index 000000000000..26049eab9010 --- /dev/null +++ b/include/linux/qnx6_fs.h @@ -0,0 +1,134 @@ +/* + * Name : qnx6_fs.h + * Author : Kai Bankett + * Function : qnx6 global filesystem definitions + * History : 17-01-2012 created + */ +#ifndef _LINUX_QNX6_FS_H +#define _LINUX_QNX6_FS_H + +#include <linux/types.h> +#include <linux/magic.h> + +#define QNX6_ROOT_INO 1 + +/* for di_status */ +#define QNX6_FILE_DIRECTORY 0x01 +#define QNX6_FILE_DELETED 0x02 +#define QNX6_FILE_NORMAL 0x03 + +#define QNX6_SUPERBLOCK_SIZE 0x200 /* superblock always is 512 bytes */ +#define QNX6_SUPERBLOCK_AREA 0x1000 /* area reserved for superblock */ +#define QNX6_BOOTBLOCK_SIZE 0x2000 /* heading bootblock area */ +#define QNX6_DIR_ENTRY_SIZE 0x20 /* dir entry size of 32 bytes */ +#define QNX6_INODE_SIZE 0x80 /* each inode is 128 bytes */ +#define QNX6_INODE_SIZE_BITS 7 /* inode entry size shift */ + +#define QNX6_NO_DIRECT_POINTERS 16 /* 16 blockptrs in sbl/inode */ +#define QNX6_PTR_MAX_LEVELS 5 /* maximum indirect levels */ + +/* for filenames */ +#define QNX6_SHORT_NAME_MAX 27 +#define QNX6_LONG_NAME_MAX 510 + +/* list of mount options */ +#define QNX6_MOUNT_MMI_FS 0x010000 /* mount as Audi MMI 3G fs */ + +/* + * This is the original qnx6 inode layout on disk. + * Each inode is 128 byte long. + */ +struct qnx6_inode_entry { + __fs64 di_size; + __fs32 di_uid; + __fs32 di_gid; + __fs32 di_ftime; + __fs32 di_mtime; + __fs32 di_atime; + __fs32 di_ctime; + __fs16 di_mode; + __fs16 di_ext_mode; + __fs32 di_block_ptr[QNX6_NO_DIRECT_POINTERS]; + __u8 di_filelevels; + __u8 di_status; + __u8 di_unknown2[2]; + __fs32 di_zero2[6]; +}; + +/* + * Each directory entry is maximum 32 bytes long. + * If more characters or special characters required it is stored + * in the longfilenames structure. + */ +struct qnx6_dir_entry { + __fs32 de_inode; + __u8 de_size; + char de_fname[QNX6_SHORT_NAME_MAX]; +}; + +/* + * Longfilename direntries have a different structure + */ +struct qnx6_long_dir_entry { + __fs32 de_inode; + __u8 de_size; + __u8 de_unknown[3]; + __fs32 de_long_inode; + __fs32 de_checksum; +}; + +struct qnx6_long_filename { + __fs16 lf_size; + __u8 lf_fname[QNX6_LONG_NAME_MAX]; +}; + +struct qnx6_root_node { + __fs64 size; + __fs32 ptr[QNX6_NO_DIRECT_POINTERS]; + __u8 levels; + __u8 mode; + __u8 spare[6]; +}; + +struct qnx6_super_block { + __fs32 sb_magic; + __fs32 sb_checksum; + __fs64 sb_serial; + __fs32 sb_ctime; /* time the fs was created */ + __fs32 sb_atime; /* last access time */ + __fs32 sb_flags; + __fs16 sb_version1; /* filesystem version information */ + __fs16 sb_version2; /* filesystem version information */ + __u8 sb_volumeid[16]; + __fs32 sb_blocksize; + __fs32 sb_num_inodes; + __fs32 sb_free_inodes; + __fs32 sb_num_blocks; + __fs32 sb_free_blocks; + __fs32 sb_allocgroup; + struct qnx6_root_node Inode; + struct qnx6_root_node Bitmap; + struct qnx6_root_node Longfile; + struct qnx6_root_node Unknown; +}; + +/* Audi MMI 3G superblock layout is different to plain qnx6 */ +struct qnx6_mmi_super_block { + __fs32 sb_magic; + __fs32 sb_checksum; + __fs64 sb_serial; + __u8 sb_spare0[12]; + __u8 sb_id[12]; + __fs32 sb_blocksize; + __fs32 sb_num_inodes; + __fs32 sb_free_inodes; + __fs32 sb_num_blocks; + __fs32 sb_free_blocks; + __u8 sb_spare1[4]; + struct qnx6_root_node Inode; + struct qnx6_root_node Bitmap; + struct qnx6_root_node Longfile; + struct qnx6_root_node Unknown; +}; + +#endif diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index 07e360b1b282..0d04cd69ab9b 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -2,6 +2,7 @@ * Copyright (C) 2001 Momchil Velikov * Portions Copyright (C) 2001 Christoph Hellwig * Copyright (C) 2006 Nick Piggin + * Copyright (C) 2012 Konstantin Khlebnikov * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -22,6 +23,7 @@ #include <linux/preempt.h> #include <linux/types.h> +#include <linux/bug.h> #include <linux/kernel.h> #include <linux/rcupdate.h> @@ -256,4 +258,199 @@ static inline void radix_tree_preload_end(void) preempt_enable(); } +/** + * struct radix_tree_iter - radix tree iterator state + * + * @index: index of current slot + * @next_index: next-to-last index for this chunk + * @tags: bit-mask for tag-iterating + * + * This radix tree iterator works in terms of "chunks" of slots. A chunk is a + * subinterval of slots contained within one radix tree leaf node. It is + * described by a pointer to its first slot and a struct radix_tree_iter + * which holds the chunk's position in the tree and its size. For tagged + * iteration radix_tree_iter also holds the slots' bit-mask for one chosen + * radix tree tag. + */ +struct radix_tree_iter { + unsigned long index; + unsigned long next_index; + unsigned long tags; +}; + +#define RADIX_TREE_ITER_TAG_MASK 0x00FF /* tag index in lower byte */ +#define RADIX_TREE_ITER_TAGGED 0x0100 /* lookup tagged slots */ +#define RADIX_TREE_ITER_CONTIG 0x0200 /* stop at first hole */ + +/** + * radix_tree_iter_init - initialize radix tree iterator + * + * @iter: pointer to iterator state + * @start: iteration starting index + * Returns: NULL + */ +static __always_inline void ** +radix_tree_iter_init(struct radix_tree_iter *iter, unsigned long start) +{ + /* + * Leave iter->tags uninitialized. radix_tree_next_chunk() will fill it + * in the case of a successful tagged chunk lookup. If the lookup was + * unsuccessful or non-tagged then nobody cares about ->tags. + * + * Set index to zero to bypass next_index overflow protection. + * See the comment in radix_tree_next_chunk() for details. + */ + iter->index = 0; + iter->next_index = start; + return NULL; +} + +/** + * radix_tree_next_chunk - find next chunk of slots for iteration + * + * @root: radix tree root + * @iter: iterator state + * @flags: RADIX_TREE_ITER_* flags and tag index + * Returns: pointer to chunk first slot, or NULL if there no more left + * + * This function looks up the next chunk in the radix tree starting from + * @iter->next_index. It returns a pointer to the chunk's first slot. + * Also it fills @iter with data about chunk: position in the tree (index), + * its end (next_index), and constructs a bit mask for tagged iterating (tags). + */ +void **radix_tree_next_chunk(struct radix_tree_root *root, + struct radix_tree_iter *iter, unsigned flags); + +/** + * radix_tree_chunk_size - get current chunk size + * + * @iter: pointer to radix tree iterator + * Returns: current chunk size + */ +static __always_inline unsigned +radix_tree_chunk_size(struct radix_tree_iter *iter) +{ + return iter->next_index - iter->index; +} + +/** + * radix_tree_next_slot - find next slot in chunk + * + * @slot: pointer to current slot + * @iter: pointer to interator state + * @flags: RADIX_TREE_ITER_*, should be constant + * Returns: pointer to next slot, or NULL if there no more left + * + * This function updates @iter->index in the case of a successful lookup. + * For tagged lookup it also eats @iter->tags. + */ +static __always_inline void ** +radix_tree_next_slot(void **slot, struct radix_tree_iter *iter, unsigned flags) +{ + if (flags & RADIX_TREE_ITER_TAGGED) { + iter->tags >>= 1; + if (likely(iter->tags & 1ul)) { + iter->index++; + return slot + 1; + } + if (!(flags & RADIX_TREE_ITER_CONTIG) && likely(iter->tags)) { + unsigned offset = __ffs(iter->tags); + + iter->tags >>= offset; + iter->index += offset + 1; + return slot + offset + 1; + } + } else { + unsigned size = radix_tree_chunk_size(iter) - 1; + + while (size--) { + slot++; + iter->index++; + if (likely(*slot)) + return slot; + if (flags & RADIX_TREE_ITER_CONTIG) + break; + } + } + return NULL; +} + +/** + * radix_tree_for_each_chunk - iterate over chunks + * + * @slot: the void** variable for pointer to chunk first slot + * @root: the struct radix_tree_root pointer + * @iter: the struct radix_tree_iter pointer + * @start: iteration starting index + * @flags: RADIX_TREE_ITER_* and tag index + * + * Locks can be released and reacquired between iterations. + */ +#define radix_tree_for_each_chunk(slot, root, iter, start, flags) \ + for (slot = radix_tree_iter_init(iter, start) ; \ + (slot = radix_tree_next_chunk(root, iter, flags)) ;) + +/** + * radix_tree_for_each_chunk_slot - iterate over slots in one chunk + * + * @slot: the void** variable, at the beginning points to chunk first slot + * @iter: the struct radix_tree_iter pointer + * @flags: RADIX_TREE_ITER_*, should be constant + * + * This macro is designed to be nested inside radix_tree_for_each_chunk(). + * @slot points to the radix tree slot, @iter->index contains its index. + */ +#define radix_tree_for_each_chunk_slot(slot, iter, flags) \ + for (; slot ; slot = radix_tree_next_slot(slot, iter, flags)) + +/** + * radix_tree_for_each_slot - iterate over non-empty slots + * + * @slot: the void** variable for pointer to slot + * @root: the struct radix_tree_root pointer + * @iter: the struct radix_tree_iter pointer + * @start: iteration starting index + * + * @slot points to radix tree slot, @iter->index contains its index. + */ +#define radix_tree_for_each_slot(slot, root, iter, start) \ + for (slot = radix_tree_iter_init(iter, start) ; \ + slot || (slot = radix_tree_next_chunk(root, iter, 0)) ; \ + slot = radix_tree_next_slot(slot, iter, 0)) + +/** + * radix_tree_for_each_contig - iterate over contiguous slots + * + * @slot: the void** variable for pointer to slot + * @root: the struct radix_tree_root pointer + * @iter: the struct radix_tree_iter pointer + * @start: iteration starting index + * + * @slot points to radix tree slot, @iter->index contains its index. + */ +#define radix_tree_for_each_contig(slot, root, iter, start) \ + for (slot = radix_tree_iter_init(iter, start) ; \ + slot || (slot = radix_tree_next_chunk(root, iter, \ + RADIX_TREE_ITER_CONTIG)) ; \ + slot = radix_tree_next_slot(slot, iter, \ + RADIX_TREE_ITER_CONTIG)) + +/** + * radix_tree_for_each_tagged - iterate over tagged slots + * + * @slot: the void** variable for pointer to slot + * @root: the struct radix_tree_root pointer + * @iter: the struct radix_tree_iter pointer + * @start: iteration starting index + * @tag: tag index + * + * @slot points to radix tree slot, @iter->index contains its index. + */ +#define radix_tree_for_each_tagged(slot, root, iter, start, tag) \ + for (slot = radix_tree_iter_init(iter, start) ; \ + slot || (slot = radix_tree_next_chunk(root, iter, \ + RADIX_TREE_ITER_TAGGED | tag)) ; \ + slot = radix_tree_next_slot(slot, iter, \ + RADIX_TREE_ITER_TAGGED)) + #endif /* _LINUX_RADIX_TREE_H */ diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index 6f6df86f1ae5..8c0a3adc5df5 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -281,6 +281,10 @@ struct mdp_superblock_1 { * active device with same 'role'. * 'recovery_offset' is also set. */ -#define MD_FEATURE_ALL (1|2|4|8|16) +#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ + |MD_FEATURE_RECOVERY_OFFSET \ + |MD_FEATURE_RESHAPE_ACTIVE \ + |MD_FEATURE_BAD_BLOCKS \ + |MD_FEATURE_REPLACEMENT) #endif diff --git a/include/linux/rar_register.h b/include/linux/rar_register.h deleted file mode 100644 index 5c6118189363..000000000000 --- a/include/linux/rar_register.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of version 2 of the GNU General - * Public License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 02111-1307, USA. - * The full GNU General Public License is included in this - * distribution in the file called COPYING. - */ - - -#ifndef _RAR_REGISTER_H -#define _RAR_REGISTER_H - -#include <linux/types.h> - -/* following are used both in drivers as well as user space apps */ - -#define RAR_TYPE_VIDEO 0 -#define RAR_TYPE_AUDIO 1 -#define RAR_TYPE_IMAGE 2 -#define RAR_TYPE_DATA 3 - -#ifdef __KERNEL__ - -struct rar_device; - -#if defined(CONFIG_RAR_REGISTER) -int register_rar(int num, - int (*callback)(unsigned long data), unsigned long data); -void unregister_rar(int num); -int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end); -int rar_lock(int rar_index); -#else -extern void unregister_rar(int num) { } -extern int rar_lock(int rar_index) { return -EIO; } - -extern inline int register_rar(int num, - int (*callback)(unsigned long data), unsigned long data) -{ - return -ENODEV; -} - -extern int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end) -{ - return -ENODEV; -} -#endif /* RAR_REGISTER */ - -#endif /* __KERNEL__ */ -#endif /* _RAR_REGISTER_H */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 937217425c47..20fb776a1d4a 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -42,6 +42,7 @@ #include <linux/lockdep.h> #include <linux/completion.h> #include <linux/debugobjects.h> +#include <linux/bug.h> #include <linux/compiler.h> #ifdef CONFIG_RCU_TORTURE_TEST @@ -418,7 +419,7 @@ extern int rcu_my_thread_group_empty(void); */ #define rcu_lockdep_assert(c, s) \ do { \ - static bool __warned; \ + static bool __section(.data.unlikely) __warned; \ if (debug_lockdep_rcu_enabled() && !__warned && !(c)) { \ __warned = true; \ lockdep_rcu_suspicious(__FILE__, __LINE__, s); \ diff --git a/include/linux/regmap.h b/include/linux/regmap.h index eb93921cdd30..a90abb6bfa64 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -13,12 +13,13 @@ * published by the Free Software Foundation. */ -#include <linux/device.h> #include <linux/list.h> struct module; +struct device; struct i2c_client; struct spi_device; +struct regmap; /* An enum of all the supported cache types */ enum regcache_type { @@ -40,10 +41,13 @@ struct reg_default { unsigned int def; }; +#ifdef CONFIG_REGMAP + /** * Configuration for the register map of a device. * * @reg_bits: Number of bits in a register address, mandatory. + * @pad_bits: Number of bits of padding between register and value. * @val_bits: Number of bits in a register value, mandatory. * * @writeable_reg: Optional callback returning true if the register @@ -74,6 +78,7 @@ struct reg_default { */ struct regmap_config { int reg_bits; + int pad_bits; int val_bits; bool (*writeable_reg)(struct device *dev, unsigned int reg); @@ -127,12 +132,22 @@ struct regmap *regmap_init_i2c(struct i2c_client *i2c, struct regmap *regmap_init_spi(struct spi_device *dev, const struct regmap_config *config); +struct regmap *devm_regmap_init(struct device *dev, + const struct regmap_bus *bus, + const struct regmap_config *config); +struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c, + const struct regmap_config *config); +struct regmap *devm_regmap_init_spi(struct spi_device *dev, + const struct regmap_config *config); + void regmap_exit(struct regmap *map); int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config); int regmap_write(struct regmap *map, unsigned int reg, unsigned int val); int regmap_raw_write(struct regmap *map, unsigned int reg, const void *val, size_t val_len); +int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val, + size_t val_count); int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val); int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len); @@ -143,12 +158,18 @@ int regmap_update_bits(struct regmap *map, unsigned int reg, int regmap_update_bits_check(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val, bool *change); +int regmap_get_val_bytes(struct regmap *map); int regcache_sync(struct regmap *map); +int regcache_sync_region(struct regmap *map, unsigned int min, + unsigned int max); void regcache_cache_only(struct regmap *map, bool enable); void regcache_cache_bypass(struct regmap *map, bool enable); void regcache_mark_dirty(struct regmap *map); +int regmap_register_patch(struct regmap *map, const struct reg_default *regs, + int num_regs); + /** * Description of an IRQ for the generic regmap irq_chip. * @@ -197,4 +218,115 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data); int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data); +#else + +/* + * These stubs should only ever be called by generic code which has + * regmap based facilities, if they ever get called at runtime + * something is going wrong and something probably needs to select + * REGMAP. + */ + +static inline int regmap_write(struct regmap *map, unsigned int reg, + unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_raw_write(struct regmap *map, unsigned int reg, + const void *val, size_t val_len) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_bulk_write(struct regmap *map, unsigned int reg, + const void *val, size_t val_count) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_read(struct regmap *map, unsigned int reg, + unsigned int *val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_raw_read(struct regmap *map, unsigned int reg, + void *val, size_t val_len) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_bulk_read(struct regmap *map, unsigned int reg, + void *val, size_t val_count) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_update_bits(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_update_bits_check(struct regmap *map, + unsigned int reg, + unsigned int mask, unsigned int val, + bool *change) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_get_val_bytes(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regcache_sync(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regcache_sync_region(struct regmap *map, unsigned int min, + unsigned int max) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline void regcache_cache_only(struct regmap *map, bool enable) +{ + WARN_ONCE(1, "regmap API is disabled"); +} + +static inline void regcache_cache_bypass(struct regmap *map, bool enable) +{ + WARN_ONCE(1, "regmap API is disabled"); +} + +static inline void regcache_mark_dirty(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); +} + +static inline int regmap_register_patch(struct regmap *map, + const struct reg_default *regs, + int num_regs) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +#endif + #endif diff --git a/include/linux/regset.h b/include/linux/regset.h index 686f37327a49..8e0c9febf495 100644 --- a/include/linux/regset.h +++ b/include/linux/regset.h @@ -15,6 +15,7 @@ #include <linux/compiler.h> #include <linux/types.h> +#include <linux/bug.h> #include <linux/uaccess.h> struct task_struct; struct user_regset; diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index 76579f964a29..7bd73bbdfd1b 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -26,7 +26,26 @@ enum ab8500_regulator_id { AB8500_NUM_REGULATORS, }; -/* AB8500 register initialization */ +/* AB9450 regulators */ +enum ab9540_regulator_id { + AB9540_LDO_AUX1, + AB9540_LDO_AUX2, + AB9540_LDO_AUX3, + AB9540_LDO_AUX4, + AB9540_LDO_INTCORE, + AB9540_LDO_TVOUT, + AB9540_LDO_USB, + AB9540_LDO_AUDIO, + AB9540_LDO_ANAMIC1, + AB9540_LDO_ANAMIC2, + AB9540_LDO_DMIC, + AB9540_LDO_ANA, + AB9540_SYSCLKREQ_2, + AB9540_SYSCLKREQ_4, + AB9540_NUM_REGULATORS, +}; + +/* AB8500 and AB9540 register initialization */ struct ab8500_regulator_reg_init { int id; u8 value; @@ -71,4 +90,53 @@ enum ab8500_regulator_reg { AB8500_NUM_REGULATOR_REGISTERS, }; + +/* AB9540 registers */ +enum ab9540_regulator_reg { + AB9540_REGUREQUESTCTRL1, + AB9540_REGUREQUESTCTRL2, + AB9540_REGUREQUESTCTRL3, + AB9540_REGUREQUESTCTRL4, + AB9540_REGUSYSCLKREQ1HPVALID1, + AB9540_REGUSYSCLKREQ1HPVALID2, + AB9540_REGUHWHPREQ1VALID1, + AB9540_REGUHWHPREQ1VALID2, + AB9540_REGUHWHPREQ2VALID1, + AB9540_REGUHWHPREQ2VALID2, + AB9540_REGUSWHPREQVALID1, + AB9540_REGUSWHPREQVALID2, + AB9540_REGUSYSCLKREQVALID1, + AB9540_REGUSYSCLKREQVALID2, + AB9540_REGUVAUX4REQVALID, + AB9540_REGUMISC1, + AB9540_VAUDIOSUPPLY, + AB9540_REGUCTRL1VAMIC, + AB9540_VSMPS1REGU, + AB9540_VSMPS2REGU, + AB9540_VSMPS3REGU, /* NOTE! PRCMU register */ + AB9540_VPLLVANAREGU, + AB9540_EXTSUPPLYREGU, + AB9540_VAUX12REGU, + AB9540_VRF1VAUX3REGU, + AB9540_VSMPS1SEL1, + AB9540_VSMPS1SEL2, + AB9540_VSMPS1SEL3, + AB9540_VSMPS2SEL1, + AB9540_VSMPS2SEL2, + AB9540_VSMPS2SEL3, + AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */ + AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */ + AB9540_VAUX1SEL, + AB9540_VAUX2SEL, + AB9540_VRF1VAUX3SEL, + AB9540_REGUCTRL2SPARE, + AB9540_VAUX4REQCTRL, + AB9540_VAUX4REGU, + AB9540_VAUX4SEL, + AB9540_REGUCTRLDISCH, + AB9540_REGUCTRLDISCH2, + AB9540_REGUCTRLDISCH3, + AB9540_NUM_REGULATOR_REGISTERS, +}; + #endif diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h deleted file mode 100644 index a6d014005d49..000000000000 --- a/include/linux/regulator/bq24022.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater) - * 1-Cell Li-Ion Charger connected via GPIOs. - * - * Copyright (c) 2008 Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -struct regulator_init_data; - -/** - * bq24022_mach_info - platform data for bq24022 - * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging - * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA - */ -struct bq24022_mach_info { - int gpio_nce; - int gpio_iset2; - struct regulator_init_data *init_data; -}; diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index b6c8d717c7ec..4ed1b30ac5fc 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -35,7 +35,8 @@ #ifndef __LINUX_REGULATOR_CONSUMER_H_ #define __LINUX_REGULATOR_CONSUMER_H_ -#include <linux/device.h> +struct device; +struct notifier_block; /* * Regulator operating modes. diff --git a/include/linux/reiserfs_acl.h b/include/linux/reiserfs_acl.h deleted file mode 100644 index f096b80e73d8..000000000000 --- a/include/linux/reiserfs_acl.h +++ /dev/null @@ -1,76 +0,0 @@ -#include <linux/init.h> -#include <linux/posix_acl.h> - -#define REISERFS_ACL_VERSION 0x0001 - -typedef struct { - __le16 e_tag; - __le16 e_perm; - __le32 e_id; -} reiserfs_acl_entry; - -typedef struct { - __le16 e_tag; - __le16 e_perm; -} reiserfs_acl_entry_short; - -typedef struct { - __le32 a_version; -} reiserfs_acl_header; - -static inline size_t reiserfs_acl_size(int count) -{ - if (count <= 4) { - return sizeof(reiserfs_acl_header) + - count * sizeof(reiserfs_acl_entry_short); - } else { - return sizeof(reiserfs_acl_header) + - 4 * sizeof(reiserfs_acl_entry_short) + - (count - 4) * sizeof(reiserfs_acl_entry); - } -} - -static inline int reiserfs_acl_count(size_t size) -{ - ssize_t s; - size -= sizeof(reiserfs_acl_header); - s = size - 4 * sizeof(reiserfs_acl_entry_short); - if (s < 0) { - if (size % sizeof(reiserfs_acl_entry_short)) - return -1; - return size / sizeof(reiserfs_acl_entry_short); - } else { - if (s % sizeof(reiserfs_acl_entry)) - return -1; - return s / sizeof(reiserfs_acl_entry) + 4; - } -} - -#ifdef CONFIG_REISERFS_FS_POSIX_ACL -struct posix_acl *reiserfs_get_acl(struct inode *inode, int type); -int reiserfs_acl_chmod(struct inode *inode); -int reiserfs_inherit_default_acl(struct reiserfs_transaction_handle *th, - struct inode *dir, struct dentry *dentry, - struct inode *inode); -int reiserfs_cache_default_acl(struct inode *dir); -extern const struct xattr_handler reiserfs_posix_acl_default_handler; -extern const struct xattr_handler reiserfs_posix_acl_access_handler; - -#else - -#define reiserfs_cache_default_acl(inode) 0 -#define reiserfs_get_acl NULL - -static inline int reiserfs_acl_chmod(struct inode *inode) -{ - return 0; -} - -static inline int -reiserfs_inherit_default_acl(struct reiserfs_transaction_handle *th, - const struct inode *dir, struct dentry *dentry, - struct inode *inode) -{ - return 0; -} -#endif diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index 2213ddcce20c..ea3700cd7367 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -1,32 +1,12 @@ /* * Copyright 1996, 1997, 1998 Hans Reiser, see reiserfs/README for licensing and copyright details */ - - /* this file has an amazingly stupid - name, yura please fix it to be - reiserfs.h, and merge all the rest - of our .h files that are in this - directory into it. */ - #ifndef _LINUX_REISER_FS_H #define _LINUX_REISER_FS_H #include <linux/types.h> #include <linux/magic.h> -#ifdef __KERNEL__ -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/workqueue.h> -#include <asm/unaligned.h> -#include <linux/bitops.h> -#include <linux/proc_fs.h> -#include <linux/buffer_head.h> -#include <linux/reiserfs_fs_i.h> -#include <linux/reiserfs_fs_sb.h> -#endif - /* * include/linux/reiser_fs.h * @@ -43,2318 +23,4 @@ #define REISERFS_IOC_GETVERSION FS_IOC_GETVERSION #define REISERFS_IOC_SETVERSION FS_IOC_SETVERSION -#ifdef __KERNEL__ -/* the 32 bit compat definitions with int argument */ -#define REISERFS_IOC32_UNPACK _IOW(0xCD, 1, int) -#define REISERFS_IOC32_GETFLAGS FS_IOC32_GETFLAGS -#define REISERFS_IOC32_SETFLAGS FS_IOC32_SETFLAGS -#define REISERFS_IOC32_GETVERSION FS_IOC32_GETVERSION -#define REISERFS_IOC32_SETVERSION FS_IOC32_SETVERSION - -/* - * Locking primitives. The write lock is a per superblock - * special mutex that has properties close to the Big Kernel Lock - * which was used in the previous locking scheme. - */ -void reiserfs_write_lock(struct super_block *s); -void reiserfs_write_unlock(struct super_block *s); -int reiserfs_write_lock_once(struct super_block *s); -void reiserfs_write_unlock_once(struct super_block *s, int lock_depth); - -#ifdef CONFIG_REISERFS_CHECK -void reiserfs_lock_check_recursive(struct super_block *s); -#else -static inline void reiserfs_lock_check_recursive(struct super_block *s) { } -#endif - -/* - * Several mutexes depend on the write lock. - * However sometimes we want to relax the write lock while we hold - * these mutexes, according to the release/reacquire on schedule() - * properties of the Bkl that were used. - * Reiserfs performances and locking were based on this scheme. - * Now that the write lock is a mutex and not the bkl anymore, doing so - * may result in a deadlock: - * - * A acquire write_lock - * A acquire j_commit_mutex - * A release write_lock and wait for something - * B acquire write_lock - * B can't acquire j_commit_mutex and sleep - * A can't acquire write lock anymore - * deadlock - * - * What we do here is avoiding such deadlock by playing the same game - * than the Bkl: if we can't acquire a mutex that depends on the write lock, - * we release the write lock, wait a bit and then retry. - * - * The mutexes concerned by this hack are: - * - The commit mutex of a journal list - * - The flush mutex - * - The journal lock - * - The inode mutex - */ -static inline void reiserfs_mutex_lock_safe(struct mutex *m, - struct super_block *s) -{ - reiserfs_lock_check_recursive(s); - reiserfs_write_unlock(s); - mutex_lock(m); - reiserfs_write_lock(s); -} - -static inline void -reiserfs_mutex_lock_nested_safe(struct mutex *m, unsigned int subclass, - struct super_block *s) -{ - reiserfs_lock_check_recursive(s); - reiserfs_write_unlock(s); - mutex_lock_nested(m, subclass); - reiserfs_write_lock(s); -} - -static inline void -reiserfs_down_read_safe(struct rw_semaphore *sem, struct super_block *s) -{ - reiserfs_lock_check_recursive(s); - reiserfs_write_unlock(s); - down_read(sem); - reiserfs_write_lock(s); -} - -/* - * When we schedule, we usually want to also release the write lock, - * according to the previous bkl based locking scheme of reiserfs. - */ -static inline void reiserfs_cond_resched(struct super_block *s) -{ - if (need_resched()) { - reiserfs_write_unlock(s); - schedule(); - reiserfs_write_lock(s); - } -} - -struct fid; - -/* in reading the #defines, it may help to understand that they employ - the following abbreviations: - - B = Buffer - I = Item header - H = Height within the tree (should be changed to LEV) - N = Number of the item in the node - STAT = stat data - DEH = Directory Entry Header - EC = Entry Count - E = Entry number - UL = Unsigned Long - BLKH = BLocK Header - UNFM = UNForMatted node - DC = Disk Child - P = Path - - These #defines are named by concatenating these abbreviations, - where first comes the arguments, and last comes the return value, - of the macro. - -*/ - -#define USE_INODE_GENERATION_COUNTER - -#define REISERFS_PREALLOCATE -#define DISPLACE_NEW_PACKING_LOCALITIES -#define PREALLOCATION_SIZE 9 - -/* n must be power of 2 */ -#define _ROUND_UP(x,n) (((x)+(n)-1u) & ~((n)-1u)) - -// to be ok for alpha and others we have to align structures to 8 byte -// boundary. -// FIXME: do not change 4 by anything else: there is code which relies on that -#define ROUND_UP(x) _ROUND_UP(x,8LL) - -/* debug levels. Right now, CONFIG_REISERFS_CHECK means print all debug -** messages. -*/ -#define REISERFS_DEBUG_CODE 5 /* extra messages to help find/debug errors */ - -void __reiserfs_warning(struct super_block *s, const char *id, - const char *func, const char *fmt, ...); -#define reiserfs_warning(s, id, fmt, args...) \ - __reiserfs_warning(s, id, __func__, fmt, ##args) -/* assertions handling */ - -/** always check a condition and panic if it's false. */ -#define __RASSERT(cond, scond, format, args...) \ -do { \ - if (!(cond)) \ - reiserfs_panic(NULL, "assertion failure", "(" #cond ") at " \ - __FILE__ ":%i:%s: " format "\n", \ - in_interrupt() ? -1 : task_pid_nr(current), \ - __LINE__, __func__ , ##args); \ -} while (0) - -#define RASSERT(cond, format, args...) __RASSERT(cond, #cond, format, ##args) - -#if defined( CONFIG_REISERFS_CHECK ) -#define RFALSE(cond, format, args...) __RASSERT(!(cond), "!(" #cond ")", format, ##args) -#else -#define RFALSE( cond, format, args... ) do {;} while( 0 ) -#endif - -#define CONSTF __attribute_const__ -/* - * Disk Data Structures - */ - -/***************************************************************************/ -/* SUPER BLOCK */ -/***************************************************************************/ - -/* - * Structure of super block on disk, a version of which in RAM is often accessed as REISERFS_SB(s)->s_rs - * the version in RAM is part of a larger structure containing fields never written to disk. - */ -#define UNSET_HASH 0 // read_super will guess about, what hash names - // in directories were sorted with -#define TEA_HASH 1 -#define YURA_HASH 2 -#define R5_HASH 3 -#define DEFAULT_HASH R5_HASH - -struct journal_params { - __le32 jp_journal_1st_block; /* where does journal start from on its - * device */ - __le32 jp_journal_dev; /* journal device st_rdev */ - __le32 jp_journal_size; /* size of the journal */ - __le32 jp_journal_trans_max; /* max number of blocks in a transaction. */ - __le32 jp_journal_magic; /* random value made on fs creation (this - * was sb_journal_block_count) */ - __le32 jp_journal_max_batch; /* max number of blocks to batch into a - * trans */ - __le32 jp_journal_max_commit_age; /* in seconds, how old can an async - * commit be */ - __le32 jp_journal_max_trans_age; /* in seconds, how old can a transaction - * be */ -}; - -/* this is the super from 3.5.X, where X >= 10 */ -struct reiserfs_super_block_v1 { - __le32 s_block_count; /* blocks count */ - __le32 s_free_blocks; /* free blocks count */ - __le32 s_root_block; /* root block number */ - struct journal_params s_journal; - __le16 s_blocksize; /* block size */ - __le16 s_oid_maxsize; /* max size of object id array, see - * get_objectid() commentary */ - __le16 s_oid_cursize; /* current size of object id array */ - __le16 s_umount_state; /* this is set to 1 when filesystem was - * umounted, to 2 - when not */ - char s_magic[10]; /* reiserfs magic string indicates that - * file system is reiserfs: - * "ReIsErFs" or "ReIsEr2Fs" or "ReIsEr3Fs" */ - __le16 s_fs_state; /* it is set to used by fsck to mark which - * phase of rebuilding is done */ - __le32 s_hash_function_code; /* indicate, what hash function is being use - * to sort names in a directory*/ - __le16 s_tree_height; /* height of disk tree */ - __le16 s_bmap_nr; /* amount of bitmap blocks needed to address - * each block of file system */ - __le16 s_version; /* this field is only reliable on filesystem - * with non-standard journal */ - __le16 s_reserved_for_journal; /* size in blocks of journal area on main - * device, we need to keep after - * making fs with non-standard journal */ -} __attribute__ ((__packed__)); - -#define SB_SIZE_V1 (sizeof(struct reiserfs_super_block_v1)) - -/* this is the on disk super block */ -struct reiserfs_super_block { - struct reiserfs_super_block_v1 s_v1; - __le32 s_inode_generation; - __le32 s_flags; /* Right now used only by inode-attributes, if enabled */ - unsigned char s_uuid[16]; /* filesystem unique identifier */ - unsigned char s_label[16]; /* filesystem volume label */ - __le16 s_mnt_count; /* Count of mounts since last fsck */ - __le16 s_max_mnt_count; /* Maximum mounts before check */ - __le32 s_lastcheck; /* Timestamp of last fsck */ - __le32 s_check_interval; /* Interval between checks */ - char s_unused[76]; /* zero filled by mkreiserfs and - * reiserfs_convert_objectid_map_v1() - * so any additions must be updated - * there as well. */ -} __attribute__ ((__packed__)); - -#define SB_SIZE (sizeof(struct reiserfs_super_block)) - -#define REISERFS_VERSION_1 0 -#define REISERFS_VERSION_2 2 - -// on-disk super block fields converted to cpu form -#define SB_DISK_SUPER_BLOCK(s) (REISERFS_SB(s)->s_rs) -#define SB_V1_DISK_SUPER_BLOCK(s) (&(SB_DISK_SUPER_BLOCK(s)->s_v1)) -#define SB_BLOCKSIZE(s) \ - le32_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_blocksize)) -#define SB_BLOCK_COUNT(s) \ - le32_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_block_count)) -#define SB_FREE_BLOCKS(s) \ - le32_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_free_blocks)) -#define SB_REISERFS_MAGIC(s) \ - (SB_V1_DISK_SUPER_BLOCK(s)->s_magic) -#define SB_ROOT_BLOCK(s) \ - le32_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_root_block)) -#define SB_TREE_HEIGHT(s) \ - le16_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_tree_height)) -#define SB_REISERFS_STATE(s) \ - le16_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_umount_state)) -#define SB_VERSION(s) le16_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_version)) -#define SB_BMAP_NR(s) le16_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_bmap_nr)) - -#define PUT_SB_BLOCK_COUNT(s, val) \ - do { SB_V1_DISK_SUPER_BLOCK(s)->s_block_count = cpu_to_le32(val); } while (0) -#define PUT_SB_FREE_BLOCKS(s, val) \ - do { SB_V1_DISK_SUPER_BLOCK(s)->s_free_blocks = cpu_to_le32(val); } while (0) -#define PUT_SB_ROOT_BLOCK(s, val) \ - do { SB_V1_DISK_SUPER_BLOCK(s)->s_root_block = cpu_to_le32(val); } while (0) -#define PUT_SB_TREE_HEIGHT(s, val) \ - do { SB_V1_DISK_SUPER_BLOCK(s)->s_tree_height = cpu_to_le16(val); } while (0) -#define PUT_SB_REISERFS_STATE(s, val) \ - do { SB_V1_DISK_SUPER_BLOCK(s)->s_umount_state = cpu_to_le16(val); } while (0) -#define PUT_SB_VERSION(s, val) \ - do { SB_V1_DISK_SUPER_BLOCK(s)->s_version = cpu_to_le16(val); } while (0) -#define PUT_SB_BMAP_NR(s, val) \ - do { SB_V1_DISK_SUPER_BLOCK(s)->s_bmap_nr = cpu_to_le16 (val); } while (0) - -#define SB_ONDISK_JP(s) (&SB_V1_DISK_SUPER_BLOCK(s)->s_journal) -#define SB_ONDISK_JOURNAL_SIZE(s) \ - le32_to_cpu ((SB_ONDISK_JP(s)->jp_journal_size)) -#define SB_ONDISK_JOURNAL_1st_BLOCK(s) \ - le32_to_cpu ((SB_ONDISK_JP(s)->jp_journal_1st_block)) -#define SB_ONDISK_JOURNAL_DEVICE(s) \ - le32_to_cpu ((SB_ONDISK_JP(s)->jp_journal_dev)) -#define SB_ONDISK_RESERVED_FOR_JOURNAL(s) \ - le16_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_reserved_for_journal)) - -#define is_block_in_log_or_reserved_area(s, block) \ - block >= SB_JOURNAL_1st_RESERVED_BLOCK(s) \ - && block < SB_JOURNAL_1st_RESERVED_BLOCK(s) + \ - ((!is_reiserfs_jr(SB_DISK_SUPER_BLOCK(s)) ? \ - SB_ONDISK_JOURNAL_SIZE(s) + 1 : SB_ONDISK_RESERVED_FOR_JOURNAL(s))) - -int is_reiserfs_3_5(struct reiserfs_super_block *rs); -int is_reiserfs_3_6(struct reiserfs_super_block *rs); -int is_reiserfs_jr(struct reiserfs_super_block *rs); - -/* ReiserFS leaves the first 64k unused, so that partition labels have - enough space. If someone wants to write a fancy bootloader that - needs more than 64k, let us know, and this will be increased in size. - This number must be larger than than the largest block size on any - platform, or code will break. -Hans */ -#define REISERFS_DISK_OFFSET_IN_BYTES (64 * 1024) -#define REISERFS_FIRST_BLOCK unused_define -#define REISERFS_JOURNAL_OFFSET_IN_BYTES REISERFS_DISK_OFFSET_IN_BYTES - -/* the spot for the super in versions 3.5 - 3.5.10 (inclusive) */ -#define REISERFS_OLD_DISK_OFFSET_IN_BYTES (8 * 1024) - -/* reiserfs internal error code (used by search_by_key and fix_nodes)) */ -#define CARRY_ON 0 -#define REPEAT_SEARCH -1 -#define IO_ERROR -2 -#define NO_DISK_SPACE -3 -#define NO_BALANCING_NEEDED (-4) -#define NO_MORE_UNUSED_CONTIGUOUS_BLOCKS (-5) -#define QUOTA_EXCEEDED -6 - -typedef __u32 b_blocknr_t; -typedef __le32 unp_t; - -struct unfm_nodeinfo { - unp_t unfm_nodenum; - unsigned short unfm_freespace; -}; - -/* there are two formats of keys: 3.5 and 3.6 - */ -#define KEY_FORMAT_3_5 0 -#define KEY_FORMAT_3_6 1 - -/* there are two stat datas */ -#define STAT_DATA_V1 0 -#define STAT_DATA_V2 1 - -static inline struct reiserfs_inode_info *REISERFS_I(const struct inode *inode) -{ - return container_of(inode, struct reiserfs_inode_info, vfs_inode); -} - -static inline struct reiserfs_sb_info *REISERFS_SB(const struct super_block *sb) -{ - return sb->s_fs_info; -} - -/* Don't trust REISERFS_SB(sb)->s_bmap_nr, it's a u16 - * which overflows on large file systems. */ -static inline __u32 reiserfs_bmap_count(struct super_block *sb) -{ - return (SB_BLOCK_COUNT(sb) - 1) / (sb->s_blocksize * 8) + 1; -} - -static inline int bmap_would_wrap(unsigned bmap_nr) -{ - return bmap_nr > ((1LL << 16) - 1); -} - -/** this says about version of key of all items (but stat data) the - object consists of */ -#define get_inode_item_key_version( inode ) \ - ((REISERFS_I(inode)->i_flags & i_item_key_version_mask) ? KEY_FORMAT_3_6 : KEY_FORMAT_3_5) - -#define set_inode_item_key_version( inode, version ) \ - ({ if((version)==KEY_FORMAT_3_6) \ - REISERFS_I(inode)->i_flags |= i_item_key_version_mask; \ - else \ - REISERFS_I(inode)->i_flags &= ~i_item_key_version_mask; }) - -#define get_inode_sd_version(inode) \ - ((REISERFS_I(inode)->i_flags & i_stat_data_version_mask) ? STAT_DATA_V2 : STAT_DATA_V1) - -#define set_inode_sd_version(inode, version) \ - ({ if((version)==STAT_DATA_V2) \ - REISERFS_I(inode)->i_flags |= i_stat_data_version_mask; \ - else \ - REISERFS_I(inode)->i_flags &= ~i_stat_data_version_mask; }) - -/* This is an aggressive tail suppression policy, I am hoping it - improves our benchmarks. The principle behind it is that percentage - space saving is what matters, not absolute space saving. This is - non-intuitive, but it helps to understand it if you consider that the - cost to access 4 blocks is not much more than the cost to access 1 - block, if you have to do a seek and rotate. A tail risks a - non-linear disk access that is significant as a percentage of total - time cost for a 4 block file and saves an amount of space that is - less significant as a percentage of space, or so goes the hypothesis. - -Hans */ -#define STORE_TAIL_IN_UNFM_S1(n_file_size,n_tail_size,n_block_size) \ -(\ - (!(n_tail_size)) || \ - (((n_tail_size) > MAX_DIRECT_ITEM_LEN(n_block_size)) || \ - ( (n_file_size) >= (n_block_size) * 4 ) || \ - ( ( (n_file_size) >= (n_block_size) * 3 ) && \ - ( (n_tail_size) >= (MAX_DIRECT_ITEM_LEN(n_block_size))/4) ) || \ - ( ( (n_file_size) >= (n_block_size) * 2 ) && \ - ( (n_tail_size) >= (MAX_DIRECT_ITEM_LEN(n_block_size))/2) ) || \ - ( ( (n_file_size) >= (n_block_size) ) && \ - ( (n_tail_size) >= (MAX_DIRECT_ITEM_LEN(n_block_size) * 3)/4) ) ) \ -) - -/* Another strategy for tails, this one means only create a tail if all the - file would fit into one DIRECT item. - Primary intention for this one is to increase performance by decreasing - seeking. -*/ -#define STORE_TAIL_IN_UNFM_S2(n_file_size,n_tail_size,n_block_size) \ -(\ - (!(n_tail_size)) || \ - (((n_file_size) > MAX_DIRECT_ITEM_LEN(n_block_size)) ) \ -) - -/* - * values for s_umount_state field - */ -#define REISERFS_VALID_FS 1 -#define REISERFS_ERROR_FS 2 - -// -// there are 5 item types currently -// -#define TYPE_STAT_DATA 0 -#define TYPE_INDIRECT 1 -#define TYPE_DIRECT 2 -#define TYPE_DIRENTRY 3 -#define TYPE_MAXTYPE 3 -#define TYPE_ANY 15 // FIXME: comment is required - -/***************************************************************************/ -/* KEY & ITEM HEAD */ -/***************************************************************************/ - -// -// directories use this key as well as old files -// -struct offset_v1 { - __le32 k_offset; - __le32 k_uniqueness; -} __attribute__ ((__packed__)); - -struct offset_v2 { - __le64 v; -} __attribute__ ((__packed__)); - -static inline __u16 offset_v2_k_type(const struct offset_v2 *v2) -{ - __u8 type = le64_to_cpu(v2->v) >> 60; - return (type <= TYPE_MAXTYPE) ? type : TYPE_ANY; -} - -static inline void set_offset_v2_k_type(struct offset_v2 *v2, int type) -{ - v2->v = - (v2->v & cpu_to_le64(~0ULL >> 4)) | cpu_to_le64((__u64) type << 60); -} - -static inline loff_t offset_v2_k_offset(const struct offset_v2 *v2) -{ - return le64_to_cpu(v2->v) & (~0ULL >> 4); -} - -static inline void set_offset_v2_k_offset(struct offset_v2 *v2, loff_t offset) -{ - offset &= (~0ULL >> 4); - v2->v = (v2->v & cpu_to_le64(15ULL << 60)) | cpu_to_le64(offset); -} - -/* Key of an item determines its location in the S+tree, and - is composed of 4 components */ -struct reiserfs_key { - __le32 k_dir_id; /* packing locality: by default parent - directory object id */ - __le32 k_objectid; /* object identifier */ - union { - struct offset_v1 k_offset_v1; - struct offset_v2 k_offset_v2; - } __attribute__ ((__packed__)) u; -} __attribute__ ((__packed__)); - -struct in_core_key { - __u32 k_dir_id; /* packing locality: by default parent - directory object id */ - __u32 k_objectid; /* object identifier */ - __u64 k_offset; - __u8 k_type; -}; - -struct cpu_key { - struct in_core_key on_disk_key; - int version; - int key_length; /* 3 in all cases but direct2indirect and - indirect2direct conversion */ -}; - -/* Our function for comparing keys can compare keys of different - lengths. It takes as a parameter the length of the keys it is to - compare. These defines are used in determining what is to be passed - to it as that parameter. */ -#define REISERFS_FULL_KEY_LEN 4 -#define REISERFS_SHORT_KEY_LEN 2 - -/* The result of the key compare */ -#define FIRST_GREATER 1 -#define SECOND_GREATER -1 -#define KEYS_IDENTICAL 0 -#define KEY_FOUND 1 -#define KEY_NOT_FOUND 0 - -#define KEY_SIZE (sizeof(struct reiserfs_key)) -#define SHORT_KEY_SIZE (sizeof (__u32) + sizeof (__u32)) - -/* return values for search_by_key and clones */ -#define ITEM_FOUND 1 -#define ITEM_NOT_FOUND 0 -#define ENTRY_FOUND 1 -#define ENTRY_NOT_FOUND 0 -#define DIRECTORY_NOT_FOUND -1 -#define REGULAR_FILE_FOUND -2 -#define DIRECTORY_FOUND -3 -#define BYTE_FOUND 1 -#define BYTE_NOT_FOUND 0 -#define FILE_NOT_FOUND -1 - -#define POSITION_FOUND 1 -#define POSITION_NOT_FOUND 0 - -// return values for reiserfs_find_entry and search_by_entry_key -#define NAME_FOUND 1 -#define NAME_NOT_FOUND 0 -#define GOTO_PREVIOUS_ITEM 2 -#define NAME_FOUND_INVISIBLE 3 - -/* Everything in the filesystem is stored as a set of items. The - item head contains the key of the item, its free space (for - indirect items) and specifies the location of the item itself - within the block. */ - -struct item_head { - /* Everything in the tree is found by searching for it based on - * its key.*/ - struct reiserfs_key ih_key; - union { - /* The free space in the last unformatted node of an - indirect item if this is an indirect item. This - equals 0xFFFF iff this is a direct item or stat data - item. Note that the key, not this field, is used to - determine the item type, and thus which field this - union contains. */ - __le16 ih_free_space_reserved; - /* Iff this is a directory item, this field equals the - number of directory entries in the directory item. */ - __le16 ih_entry_count; - } __attribute__ ((__packed__)) u; - __le16 ih_item_len; /* total size of the item body */ - __le16 ih_item_location; /* an offset to the item body - * within the block */ - __le16 ih_version; /* 0 for all old items, 2 for new - ones. Highest bit is set by fsck - temporary, cleaned after all - done */ -} __attribute__ ((__packed__)); -/* size of item header */ -#define IH_SIZE (sizeof(struct item_head)) - -#define ih_free_space(ih) le16_to_cpu((ih)->u.ih_free_space_reserved) -#define ih_version(ih) le16_to_cpu((ih)->ih_version) -#define ih_entry_count(ih) le16_to_cpu((ih)->u.ih_entry_count) -#define ih_location(ih) le16_to_cpu((ih)->ih_item_location) -#define ih_item_len(ih) le16_to_cpu((ih)->ih_item_len) - -#define put_ih_free_space(ih, val) do { (ih)->u.ih_free_space_reserved = cpu_to_le16(val); } while(0) -#define put_ih_version(ih, val) do { (ih)->ih_version = cpu_to_le16(val); } while (0) -#define put_ih_entry_count(ih, val) do { (ih)->u.ih_entry_count = cpu_to_le16(val); } while (0) -#define put_ih_location(ih, val) do { (ih)->ih_item_location = cpu_to_le16(val); } while (0) -#define put_ih_item_len(ih, val) do { (ih)->ih_item_len = cpu_to_le16(val); } while (0) - -#define unreachable_item(ih) (ih_version(ih) & (1 << 15)) - -#define get_ih_free_space(ih) (ih_version (ih) == KEY_FORMAT_3_6 ? 0 : ih_free_space (ih)) -#define set_ih_free_space(ih,val) put_ih_free_space((ih), ((ih_version(ih) == KEY_FORMAT_3_6) ? 0 : (val))) - -/* these operate on indirect items, where you've got an array of ints -** at a possibly unaligned location. These are a noop on ia32 -** -** p is the array of __u32, i is the index into the array, v is the value -** to store there. -*/ -#define get_block_num(p, i) get_unaligned_le32((p) + (i)) -#define put_block_num(p, i, v) put_unaligned_le32((v), (p) + (i)) - -// -// in old version uniqueness field shows key type -// -#define V1_SD_UNIQUENESS 0 -#define V1_INDIRECT_UNIQUENESS 0xfffffffe -#define V1_DIRECT_UNIQUENESS 0xffffffff -#define V1_DIRENTRY_UNIQUENESS 500 -#define V1_ANY_UNIQUENESS 555 // FIXME: comment is required - -// -// here are conversion routines -// -static inline int uniqueness2type(__u32 uniqueness) CONSTF; -static inline int uniqueness2type(__u32 uniqueness) -{ - switch ((int)uniqueness) { - case V1_SD_UNIQUENESS: - return TYPE_STAT_DATA; - case V1_INDIRECT_UNIQUENESS: - return TYPE_INDIRECT; - case V1_DIRECT_UNIQUENESS: - return TYPE_DIRECT; - case V1_DIRENTRY_UNIQUENESS: - return TYPE_DIRENTRY; - case V1_ANY_UNIQUENESS: - default: - return TYPE_ANY; - } -} - -static inline __u32 type2uniqueness(int type) CONSTF; -static inline __u32 type2uniqueness(int type) -{ - switch (type) { - case TYPE_STAT_DATA: - return V1_SD_UNIQUENESS; - case TYPE_INDIRECT: - return V1_INDIRECT_UNIQUENESS; - case TYPE_DIRECT: - return V1_DIRECT_UNIQUENESS; - case TYPE_DIRENTRY: - return V1_DIRENTRY_UNIQUENESS; - case TYPE_ANY: - default: - return V1_ANY_UNIQUENESS; - } -} - -// -// key is pointer to on disk key which is stored in le, result is cpu, -// there is no way to get version of object from key, so, provide -// version to these defines -// -static inline loff_t le_key_k_offset(int version, - const struct reiserfs_key *key) -{ - return (version == KEY_FORMAT_3_5) ? - le32_to_cpu(key->u.k_offset_v1.k_offset) : - offset_v2_k_offset(&(key->u.k_offset_v2)); -} - -static inline loff_t le_ih_k_offset(const struct item_head *ih) -{ - return le_key_k_offset(ih_version(ih), &(ih->ih_key)); -} - -static inline loff_t le_key_k_type(int version, const struct reiserfs_key *key) -{ - return (version == KEY_FORMAT_3_5) ? - uniqueness2type(le32_to_cpu(key->u.k_offset_v1.k_uniqueness)) : - offset_v2_k_type(&(key->u.k_offset_v2)); -} - -static inline loff_t le_ih_k_type(const struct item_head *ih) -{ - return le_key_k_type(ih_version(ih), &(ih->ih_key)); -} - -static inline void set_le_key_k_offset(int version, struct reiserfs_key *key, - loff_t offset) -{ - (version == KEY_FORMAT_3_5) ? (void)(key->u.k_offset_v1.k_offset = cpu_to_le32(offset)) : /* jdm check */ - (void)(set_offset_v2_k_offset(&(key->u.k_offset_v2), offset)); -} - -static inline void set_le_ih_k_offset(struct item_head *ih, loff_t offset) -{ - set_le_key_k_offset(ih_version(ih), &(ih->ih_key), offset); -} - -static inline void set_le_key_k_type(int version, struct reiserfs_key *key, - int type) -{ - (version == KEY_FORMAT_3_5) ? - (void)(key->u.k_offset_v1.k_uniqueness = - cpu_to_le32(type2uniqueness(type))) - : (void)(set_offset_v2_k_type(&(key->u.k_offset_v2), type)); -} - -static inline void set_le_ih_k_type(struct item_head *ih, int type) -{ - set_le_key_k_type(ih_version(ih), &(ih->ih_key), type); -} - -static inline int is_direntry_le_key(int version, struct reiserfs_key *key) -{ - return le_key_k_type(version, key) == TYPE_DIRENTRY; -} - -static inline int is_direct_le_key(int version, struct reiserfs_key *key) -{ - return le_key_k_type(version, key) == TYPE_DIRECT; -} - -static inline int is_indirect_le_key(int version, struct reiserfs_key *key) -{ - return le_key_k_type(version, key) == TYPE_INDIRECT; -} - -static inline int is_statdata_le_key(int version, struct reiserfs_key *key) -{ - return le_key_k_type(version, key) == TYPE_STAT_DATA; -} - -// -// item header has version. -// -static inline int is_direntry_le_ih(struct item_head *ih) -{ - return is_direntry_le_key(ih_version(ih), &ih->ih_key); -} - -static inline int is_direct_le_ih(struct item_head *ih) -{ - return is_direct_le_key(ih_version(ih), &ih->ih_key); -} - -static inline int is_indirect_le_ih(struct item_head *ih) -{ - return is_indirect_le_key(ih_version(ih), &ih->ih_key); -} - -static inline int is_statdata_le_ih(struct item_head *ih) -{ - return is_statdata_le_key(ih_version(ih), &ih->ih_key); -} - -// -// key is pointer to cpu key, result is cpu -// -static inline loff_t cpu_key_k_offset(const struct cpu_key *key) -{ - return key->on_disk_key.k_offset; -} - -static inline loff_t cpu_key_k_type(const struct cpu_key *key) -{ - return key->on_disk_key.k_type; -} - -static inline void set_cpu_key_k_offset(struct cpu_key *key, loff_t offset) -{ - key->on_disk_key.k_offset = offset; -} - -static inline void set_cpu_key_k_type(struct cpu_key *key, int type) -{ - key->on_disk_key.k_type = type; -} - -static inline void cpu_key_k_offset_dec(struct cpu_key *key) -{ - key->on_disk_key.k_offset--; -} - -#define is_direntry_cpu_key(key) (cpu_key_k_type (key) == TYPE_DIRENTRY) -#define is_direct_cpu_key(key) (cpu_key_k_type (key) == TYPE_DIRECT) -#define is_indirect_cpu_key(key) (cpu_key_k_type (key) == TYPE_INDIRECT) -#define is_statdata_cpu_key(key) (cpu_key_k_type (key) == TYPE_STAT_DATA) - -/* are these used ? */ -#define is_direntry_cpu_ih(ih) (is_direntry_cpu_key (&((ih)->ih_key))) -#define is_direct_cpu_ih(ih) (is_direct_cpu_key (&((ih)->ih_key))) -#define is_indirect_cpu_ih(ih) (is_indirect_cpu_key (&((ih)->ih_key))) -#define is_statdata_cpu_ih(ih) (is_statdata_cpu_key (&((ih)->ih_key))) - -#define I_K_KEY_IN_ITEM(ih, key, n_blocksize) \ - (!COMP_SHORT_KEYS(ih, key) && \ - I_OFF_BYTE_IN_ITEM(ih, k_offset(key), n_blocksize)) - -/* maximal length of item */ -#define MAX_ITEM_LEN(block_size) (block_size - BLKH_SIZE - IH_SIZE) -#define MIN_ITEM_LEN 1 - -/* object identifier for root dir */ -#define REISERFS_ROOT_OBJECTID 2 -#define REISERFS_ROOT_PARENT_OBJECTID 1 - -extern struct reiserfs_key root_key; - -/* - * Picture represents a leaf of the S+tree - * ______________________________________________________ - * | | Array of | | | - * |Block | Object-Item | F r e e | Objects- | - * | head | Headers | S p a c e | Items | - * |______|_______________|___________________|___________| - */ - -/* Header of a disk block. More precisely, header of a formatted leaf - or internal node, and not the header of an unformatted node. */ -struct block_head { - __le16 blk_level; /* Level of a block in the tree. */ - __le16 blk_nr_item; /* Number of keys/items in a block. */ - __le16 blk_free_space; /* Block free space in bytes. */ - __le16 blk_reserved; - /* dump this in v4/planA */ - struct reiserfs_key blk_right_delim_key; /* kept only for compatibility */ -}; - -#define BLKH_SIZE (sizeof(struct block_head)) -#define blkh_level(p_blkh) (le16_to_cpu((p_blkh)->blk_level)) -#define blkh_nr_item(p_blkh) (le16_to_cpu((p_blkh)->blk_nr_item)) -#define blkh_free_space(p_blkh) (le16_to_cpu((p_blkh)->blk_free_space)) -#define blkh_reserved(p_blkh) (le16_to_cpu((p_blkh)->blk_reserved)) -#define set_blkh_level(p_blkh,val) ((p_blkh)->blk_level = cpu_to_le16(val)) -#define set_blkh_nr_item(p_blkh,val) ((p_blkh)->blk_nr_item = cpu_to_le16(val)) -#define set_blkh_free_space(p_blkh,val) ((p_blkh)->blk_free_space = cpu_to_le16(val)) -#define set_blkh_reserved(p_blkh,val) ((p_blkh)->blk_reserved = cpu_to_le16(val)) -#define blkh_right_delim_key(p_blkh) ((p_blkh)->blk_right_delim_key) -#define set_blkh_right_delim_key(p_blkh,val) ((p_blkh)->blk_right_delim_key = val) - -/* - * values for blk_level field of the struct block_head - */ - -#define FREE_LEVEL 0 /* when node gets removed from the tree its - blk_level is set to FREE_LEVEL. It is then - used to see whether the node is still in the - tree */ - -#define DISK_LEAF_NODE_LEVEL 1 /* Leaf node level. */ - -/* Given the buffer head of a formatted node, resolve to the block head of that node. */ -#define B_BLK_HEAD(bh) ((struct block_head *)((bh)->b_data)) -/* Number of items that are in buffer. */ -#define B_NR_ITEMS(bh) (blkh_nr_item(B_BLK_HEAD(bh))) -#define B_LEVEL(bh) (blkh_level(B_BLK_HEAD(bh))) -#define B_FREE_SPACE(bh) (blkh_free_space(B_BLK_HEAD(bh))) - -#define PUT_B_NR_ITEMS(bh, val) do { set_blkh_nr_item(B_BLK_HEAD(bh), val); } while (0) -#define PUT_B_LEVEL(bh, val) do { set_blkh_level(B_BLK_HEAD(bh), val); } while (0) -#define PUT_B_FREE_SPACE(bh, val) do { set_blkh_free_space(B_BLK_HEAD(bh), val); } while (0) - -/* Get right delimiting key. -- little endian */ -#define B_PRIGHT_DELIM_KEY(bh) (&(blk_right_delim_key(B_BLK_HEAD(bh)))) - -/* Does the buffer contain a disk leaf. */ -#define B_IS_ITEMS_LEVEL(bh) (B_LEVEL(bh) == DISK_LEAF_NODE_LEVEL) - -/* Does the buffer contain a disk internal node */ -#define B_IS_KEYS_LEVEL(bh) (B_LEVEL(bh) > DISK_LEAF_NODE_LEVEL \ - && B_LEVEL(bh) <= MAX_HEIGHT) - -/***************************************************************************/ -/* STAT DATA */ -/***************************************************************************/ - -// -// old stat data is 32 bytes long. We are going to distinguish new one by -// different size -// -struct stat_data_v1 { - __le16 sd_mode; /* file type, permissions */ - __le16 sd_nlink; /* number of hard links */ - __le16 sd_uid; /* owner */ - __le16 sd_gid; /* group */ - __le32 sd_size; /* file size */ - __le32 sd_atime; /* time of last access */ - __le32 sd_mtime; /* time file was last modified */ - __le32 sd_ctime; /* time inode (stat data) was last changed (except changes to sd_atime and sd_mtime) */ - union { - __le32 sd_rdev; - __le32 sd_blocks; /* number of blocks file uses */ - } __attribute__ ((__packed__)) u; - __le32 sd_first_direct_byte; /* first byte of file which is stored - in a direct item: except that if it - equals 1 it is a symlink and if it - equals ~(__u32)0 there is no - direct item. The existence of this - field really grates on me. Let's - replace it with a macro based on - sd_size and our tail suppression - policy. Someday. -Hans */ -} __attribute__ ((__packed__)); - -#define SD_V1_SIZE (sizeof(struct stat_data_v1)) -#define stat_data_v1(ih) (ih_version (ih) == KEY_FORMAT_3_5) -#define sd_v1_mode(sdp) (le16_to_cpu((sdp)->sd_mode)) -#define set_sd_v1_mode(sdp,v) ((sdp)->sd_mode = cpu_to_le16(v)) -#define sd_v1_nlink(sdp) (le16_to_cpu((sdp)->sd_nlink)) -#define set_sd_v1_nlink(sdp,v) ((sdp)->sd_nlink = cpu_to_le16(v)) -#define sd_v1_uid(sdp) (le16_to_cpu((sdp)->sd_uid)) -#define set_sd_v1_uid(sdp,v) ((sdp)->sd_uid = cpu_to_le16(v)) -#define sd_v1_gid(sdp) (le16_to_cpu((sdp)->sd_gid)) -#define set_sd_v1_gid(sdp,v) ((sdp)->sd_gid = cpu_to_le16(v)) -#define sd_v1_size(sdp) (le32_to_cpu((sdp)->sd_size)) -#define set_sd_v1_size(sdp,v) ((sdp)->sd_size = cpu_to_le32(v)) -#define sd_v1_atime(sdp) (le32_to_cpu((sdp)->sd_atime)) -#define set_sd_v1_atime(sdp,v) ((sdp)->sd_atime = cpu_to_le32(v)) -#define sd_v1_mtime(sdp) (le32_to_cpu((sdp)->sd_mtime)) -#define set_sd_v1_mtime(sdp,v) ((sdp)->sd_mtime = cpu_to_le32(v)) -#define sd_v1_ctime(sdp) (le32_to_cpu((sdp)->sd_ctime)) -#define set_sd_v1_ctime(sdp,v) ((sdp)->sd_ctime = cpu_to_le32(v)) -#define sd_v1_rdev(sdp) (le32_to_cpu((sdp)->u.sd_rdev)) -#define set_sd_v1_rdev(sdp,v) ((sdp)->u.sd_rdev = cpu_to_le32(v)) -#define sd_v1_blocks(sdp) (le32_to_cpu((sdp)->u.sd_blocks)) -#define set_sd_v1_blocks(sdp,v) ((sdp)->u.sd_blocks = cpu_to_le32(v)) -#define sd_v1_first_direct_byte(sdp) \ - (le32_to_cpu((sdp)->sd_first_direct_byte)) -#define set_sd_v1_first_direct_byte(sdp,v) \ - ((sdp)->sd_first_direct_byte = cpu_to_le32(v)) - -/* inode flags stored in sd_attrs (nee sd_reserved) */ - -/* we want common flags to have the same values as in ext2, - so chattr(1) will work without problems */ -#define REISERFS_IMMUTABLE_FL FS_IMMUTABLE_FL -#define REISERFS_APPEND_FL FS_APPEND_FL -#define REISERFS_SYNC_FL FS_SYNC_FL -#define REISERFS_NOATIME_FL FS_NOATIME_FL -#define REISERFS_NODUMP_FL FS_NODUMP_FL -#define REISERFS_SECRM_FL FS_SECRM_FL -#define REISERFS_UNRM_FL FS_UNRM_FL -#define REISERFS_COMPR_FL FS_COMPR_FL -#define REISERFS_NOTAIL_FL FS_NOTAIL_FL - -/* persistent flags that file inherits from the parent directory */ -#define REISERFS_INHERIT_MASK ( REISERFS_IMMUTABLE_FL | \ - REISERFS_SYNC_FL | \ - REISERFS_NOATIME_FL | \ - REISERFS_NODUMP_FL | \ - REISERFS_SECRM_FL | \ - REISERFS_COMPR_FL | \ - REISERFS_NOTAIL_FL ) - -/* Stat Data on disk (reiserfs version of UFS disk inode minus the - address blocks) */ -struct stat_data { - __le16 sd_mode; /* file type, permissions */ - __le16 sd_attrs; /* persistent inode flags */ - __le32 sd_nlink; /* number of hard links */ - __le64 sd_size; /* file size */ - __le32 sd_uid; /* owner */ - __le32 sd_gid; /* group */ - __le32 sd_atime; /* time of last access */ - __le32 sd_mtime; /* time file was last modified */ - __le32 sd_ctime; /* time inode (stat data) was last changed (except changes to sd_atime and sd_mtime) */ - __le32 sd_blocks; - union { - __le32 sd_rdev; - __le32 sd_generation; - //__le32 sd_first_direct_byte; - /* first byte of file which is stored in a - direct item: except that if it equals 1 - it is a symlink and if it equals - ~(__u32)0 there is no direct item. The - existence of this field really grates - on me. Let's replace it with a macro - based on sd_size and our tail - suppression policy? */ - } __attribute__ ((__packed__)) u; -} __attribute__ ((__packed__)); -// -// this is 44 bytes long -// -#define SD_SIZE (sizeof(struct stat_data)) -#define SD_V2_SIZE SD_SIZE -#define stat_data_v2(ih) (ih_version (ih) == KEY_FORMAT_3_6) -#define sd_v2_mode(sdp) (le16_to_cpu((sdp)->sd_mode)) -#define set_sd_v2_mode(sdp,v) ((sdp)->sd_mode = cpu_to_le16(v)) -/* sd_reserved */ -/* set_sd_reserved */ -#define sd_v2_nlink(sdp) (le32_to_cpu((sdp)->sd_nlink)) -#define set_sd_v2_nlink(sdp,v) ((sdp)->sd_nlink = cpu_to_le32(v)) -#define sd_v2_size(sdp) (le64_to_cpu((sdp)->sd_size)) -#define set_sd_v2_size(sdp,v) ((sdp)->sd_size = cpu_to_le64(v)) -#define sd_v2_uid(sdp) (le32_to_cpu((sdp)->sd_uid)) -#define set_sd_v2_uid(sdp,v) ((sdp)->sd_uid = cpu_to_le32(v)) -#define sd_v2_gid(sdp) (le32_to_cpu((sdp)->sd_gid)) -#define set_sd_v2_gid(sdp,v) ((sdp)->sd_gid = cpu_to_le32(v)) -#define sd_v2_atime(sdp) (le32_to_cpu((sdp)->sd_atime)) -#define set_sd_v2_atime(sdp,v) ((sdp)->sd_atime = cpu_to_le32(v)) -#define sd_v2_mtime(sdp) (le32_to_cpu((sdp)->sd_mtime)) -#define set_sd_v2_mtime(sdp,v) ((sdp)->sd_mtime = cpu_to_le32(v)) -#define sd_v2_ctime(sdp) (le32_to_cpu((sdp)->sd_ctime)) -#define set_sd_v2_ctime(sdp,v) ((sdp)->sd_ctime = cpu_to_le32(v)) -#define sd_v2_blocks(sdp) (le32_to_cpu((sdp)->sd_blocks)) -#define set_sd_v2_blocks(sdp,v) ((sdp)->sd_blocks = cpu_to_le32(v)) -#define sd_v2_rdev(sdp) (le32_to_cpu((sdp)->u.sd_rdev)) -#define set_sd_v2_rdev(sdp,v) ((sdp)->u.sd_rdev = cpu_to_le32(v)) -#define sd_v2_generation(sdp) (le32_to_cpu((sdp)->u.sd_generation)) -#define set_sd_v2_generation(sdp,v) ((sdp)->u.sd_generation = cpu_to_le32(v)) -#define sd_v2_attrs(sdp) (le16_to_cpu((sdp)->sd_attrs)) -#define set_sd_v2_attrs(sdp,v) ((sdp)->sd_attrs = cpu_to_le16(v)) - -/***************************************************************************/ -/* DIRECTORY STRUCTURE */ -/***************************************************************************/ -/* - Picture represents the structure of directory items - ________________________________________________ - | Array of | | | | | | - | directory |N-1| N-2 | .... | 1st |0th| - | entry headers | | | | | | - |_______________|___|_____|________|_______|___| - <---- directory entries ------> - - First directory item has k_offset component 1. We store "." and ".." - in one item, always, we never split "." and ".." into differing - items. This makes, among other things, the code for removing - directories simpler. */ -#define SD_OFFSET 0 -#define SD_UNIQUENESS 0 -#define DOT_OFFSET 1 -#define DOT_DOT_OFFSET 2 -#define DIRENTRY_UNIQUENESS 500 - -/* */ -#define FIRST_ITEM_OFFSET 1 - -/* - Q: How to get key of object pointed to by entry from entry? - - A: Each directory entry has its header. This header has deh_dir_id and deh_objectid fields, those are key - of object, entry points to */ - -/* NOT IMPLEMENTED: - Directory will someday contain stat data of object */ - -struct reiserfs_de_head { - __le32 deh_offset; /* third component of the directory entry key */ - __le32 deh_dir_id; /* objectid of the parent directory of the object, that is referenced - by directory entry */ - __le32 deh_objectid; /* objectid of the object, that is referenced by directory entry */ - __le16 deh_location; /* offset of name in the whole item */ - __le16 deh_state; /* whether 1) entry contains stat data (for future), and 2) whether - entry is hidden (unlinked) */ -} __attribute__ ((__packed__)); -#define DEH_SIZE sizeof(struct reiserfs_de_head) -#define deh_offset(p_deh) (le32_to_cpu((p_deh)->deh_offset)) -#define deh_dir_id(p_deh) (le32_to_cpu((p_deh)->deh_dir_id)) -#define deh_objectid(p_deh) (le32_to_cpu((p_deh)->deh_objectid)) -#define deh_location(p_deh) (le16_to_cpu((p_deh)->deh_location)) -#define deh_state(p_deh) (le16_to_cpu((p_deh)->deh_state)) - -#define put_deh_offset(p_deh,v) ((p_deh)->deh_offset = cpu_to_le32((v))) -#define put_deh_dir_id(p_deh,v) ((p_deh)->deh_dir_id = cpu_to_le32((v))) -#define put_deh_objectid(p_deh,v) ((p_deh)->deh_objectid = cpu_to_le32((v))) -#define put_deh_location(p_deh,v) ((p_deh)->deh_location = cpu_to_le16((v))) -#define put_deh_state(p_deh,v) ((p_deh)->deh_state = cpu_to_le16((v))) - -/* empty directory contains two entries "." and ".." and their headers */ -#define EMPTY_DIR_SIZE \ -(DEH_SIZE * 2 + ROUND_UP (strlen (".")) + ROUND_UP (strlen (".."))) - -/* old format directories have this size when empty */ -#define EMPTY_DIR_SIZE_V1 (DEH_SIZE * 2 + 3) - -#define DEH_Statdata 0 /* not used now */ -#define DEH_Visible 2 - -/* 64 bit systems (and the S/390) need to be aligned explicitly -jdm */ -#if BITS_PER_LONG == 64 || defined(__s390__) || defined(__hppa__) -# define ADDR_UNALIGNED_BITS (3) -#endif - -/* These are only used to manipulate deh_state. - * Because of this, we'll use the ext2_ bit routines, - * since they are little endian */ -#ifdef ADDR_UNALIGNED_BITS - -# define aligned_address(addr) ((void *)((long)(addr) & ~((1UL << ADDR_UNALIGNED_BITS) - 1))) -# define unaligned_offset(addr) (((int)((long)(addr) & ((1 << ADDR_UNALIGNED_BITS) - 1))) << 3) - -# define set_bit_unaligned(nr, addr) \ - __test_and_set_bit_le((nr) + unaligned_offset(addr), aligned_address(addr)) -# define clear_bit_unaligned(nr, addr) \ - __test_and_clear_bit_le((nr) + unaligned_offset(addr), aligned_address(addr)) -# define test_bit_unaligned(nr, addr) \ - test_bit_le((nr) + unaligned_offset(addr), aligned_address(addr)) - -#else - -# define set_bit_unaligned(nr, addr) __test_and_set_bit_le(nr, addr) -# define clear_bit_unaligned(nr, addr) __test_and_clear_bit_le(nr, addr) -# define test_bit_unaligned(nr, addr) test_bit_le(nr, addr) - -#endif - -#define mark_de_with_sd(deh) set_bit_unaligned (DEH_Statdata, &((deh)->deh_state)) -#define mark_de_without_sd(deh) clear_bit_unaligned (DEH_Statdata, &((deh)->deh_state)) -#define mark_de_visible(deh) set_bit_unaligned (DEH_Visible, &((deh)->deh_state)) -#define mark_de_hidden(deh) clear_bit_unaligned (DEH_Visible, &((deh)->deh_state)) - -#define de_with_sd(deh) test_bit_unaligned (DEH_Statdata, &((deh)->deh_state)) -#define de_visible(deh) test_bit_unaligned (DEH_Visible, &((deh)->deh_state)) -#define de_hidden(deh) !test_bit_unaligned (DEH_Visible, &((deh)->deh_state)) - -extern void make_empty_dir_item_v1(char *body, __le32 dirid, __le32 objid, - __le32 par_dirid, __le32 par_objid); -extern void make_empty_dir_item(char *body, __le32 dirid, __le32 objid, - __le32 par_dirid, __le32 par_objid); - -/* array of the entry headers */ - /* get item body */ -#define B_I_PITEM(bh,ih) ( (bh)->b_data + ih_location(ih) ) -#define B_I_DEH(bh,ih) ((struct reiserfs_de_head *)(B_I_PITEM(bh,ih))) - -/* length of the directory entry in directory item. This define - calculates length of i-th directory entry using directory entry - locations from dir entry head. When it calculates length of 0-th - directory entry, it uses length of whole item in place of entry - location of the non-existent following entry in the calculation. - See picture above.*/ -/* -#define I_DEH_N_ENTRY_LENGTH(ih,deh,i) \ -((i) ? (deh_location((deh)-1) - deh_location((deh))) : (ih_item_len((ih)) - deh_location((deh)))) -*/ -static inline int entry_length(const struct buffer_head *bh, - const struct item_head *ih, int pos_in_item) -{ - struct reiserfs_de_head *deh; - - deh = B_I_DEH(bh, ih) + pos_in_item; - if (pos_in_item) - return deh_location(deh - 1) - deh_location(deh); - - return ih_item_len(ih) - deh_location(deh); -} - -/* number of entries in the directory item, depends on ENTRY_COUNT being at the start of directory dynamic data. */ -#define I_ENTRY_COUNT(ih) (ih_entry_count((ih))) - -/* name by bh, ih and entry_num */ -#define B_I_E_NAME(bh,ih,entry_num) ((char *)(bh->b_data + ih_location(ih) + deh_location(B_I_DEH(bh,ih)+(entry_num)))) - -// two entries per block (at least) -#define REISERFS_MAX_NAME(block_size) 255 - -/* this structure is used for operations on directory entries. It is - not a disk structure. */ -/* When reiserfs_find_entry or search_by_entry_key find directory - entry, they return filled reiserfs_dir_entry structure */ -struct reiserfs_dir_entry { - struct buffer_head *de_bh; - int de_item_num; - struct item_head *de_ih; - int de_entry_num; - struct reiserfs_de_head *de_deh; - int de_entrylen; - int de_namelen; - char *de_name; - unsigned long *de_gen_number_bit_string; - - __u32 de_dir_id; - __u32 de_objectid; - - struct cpu_key de_entry_key; -}; - -/* these defines are useful when a particular member of a reiserfs_dir_entry is needed */ - -/* pointer to file name, stored in entry */ -#define B_I_DEH_ENTRY_FILE_NAME(bh,ih,deh) (B_I_PITEM (bh, ih) + deh_location(deh)) - -/* length of name */ -#define I_DEH_N_ENTRY_FILE_NAME_LENGTH(ih,deh,entry_num) \ -(I_DEH_N_ENTRY_LENGTH (ih, deh, entry_num) - (de_with_sd (deh) ? SD_SIZE : 0)) - -/* hash value occupies bits from 7 up to 30 */ -#define GET_HASH_VALUE(offset) ((offset) & 0x7fffff80LL) -/* generation number occupies 7 bits starting from 0 up to 6 */ -#define GET_GENERATION_NUMBER(offset) ((offset) & 0x7fLL) -#define MAX_GENERATION_NUMBER 127 - -#define SET_GENERATION_NUMBER(offset,gen_number) (GET_HASH_VALUE(offset)|(gen_number)) - -/* - * Picture represents an internal node of the reiserfs tree - * ______________________________________________________ - * | | Array of | Array of | Free | - * |block | keys | pointers | space | - * | head | N | N+1 | | - * |______|_______________|___________________|___________| - */ - -/***************************************************************************/ -/* DISK CHILD */ -/***************************************************************************/ -/* Disk child pointer: The pointer from an internal node of the tree - to a node that is on disk. */ -struct disk_child { - __le32 dc_block_number; /* Disk child's block number. */ - __le16 dc_size; /* Disk child's used space. */ - __le16 dc_reserved; -}; - -#define DC_SIZE (sizeof(struct disk_child)) -#define dc_block_number(dc_p) (le32_to_cpu((dc_p)->dc_block_number)) -#define dc_size(dc_p) (le16_to_cpu((dc_p)->dc_size)) -#define put_dc_block_number(dc_p, val) do { (dc_p)->dc_block_number = cpu_to_le32(val); } while(0) -#define put_dc_size(dc_p, val) do { (dc_p)->dc_size = cpu_to_le16(val); } while(0) - -/* Get disk child by buffer header and position in the tree node. */ -#define B_N_CHILD(bh, n_pos) ((struct disk_child *)\ -((bh)->b_data + BLKH_SIZE + B_NR_ITEMS(bh) * KEY_SIZE + DC_SIZE * (n_pos))) - -/* Get disk child number by buffer header and position in the tree node. */ -#define B_N_CHILD_NUM(bh, n_pos) (dc_block_number(B_N_CHILD(bh, n_pos))) -#define PUT_B_N_CHILD_NUM(bh, n_pos, val) \ - (put_dc_block_number(B_N_CHILD(bh, n_pos), val)) - - /* maximal value of field child_size in structure disk_child */ - /* child size is the combined size of all items and their headers */ -#define MAX_CHILD_SIZE(bh) ((int)( (bh)->b_size - BLKH_SIZE )) - -/* amount of used space in buffer (not including block head) */ -#define B_CHILD_SIZE(cur) (MAX_CHILD_SIZE(cur)-(B_FREE_SPACE(cur))) - -/* max and min number of keys in internal node */ -#define MAX_NR_KEY(bh) ( (MAX_CHILD_SIZE(bh)-DC_SIZE)/(KEY_SIZE+DC_SIZE) ) -#define MIN_NR_KEY(bh) (MAX_NR_KEY(bh)/2) - -/***************************************************************************/ -/* PATH STRUCTURES AND DEFINES */ -/***************************************************************************/ - -/* Search_by_key fills up the path from the root to the leaf as it descends the tree looking for the - key. It uses reiserfs_bread to try to find buffers in the cache given their block number. If it - does not find them in the cache it reads them from disk. For each node search_by_key finds using - reiserfs_bread it then uses bin_search to look through that node. bin_search will find the - position of the block_number of the next node if it is looking through an internal node. If it - is looking through a leaf node bin_search will find the position of the item which has key either - equal to given key, or which is the maximal key less than the given key. */ - -struct path_element { - struct buffer_head *pe_buffer; /* Pointer to the buffer at the path in the tree. */ - int pe_position; /* Position in the tree node which is placed in the */ - /* buffer above. */ -}; - -#define MAX_HEIGHT 5 /* maximal height of a tree. don't change this without changing JOURNAL_PER_BALANCE_CNT */ -#define EXTENDED_MAX_HEIGHT 7 /* Must be equals MAX_HEIGHT + FIRST_PATH_ELEMENT_OFFSET */ -#define FIRST_PATH_ELEMENT_OFFSET 2 /* Must be equal to at least 2. */ - -#define ILLEGAL_PATH_ELEMENT_OFFSET 1 /* Must be equal to FIRST_PATH_ELEMENT_OFFSET - 1 */ -#define MAX_FEB_SIZE 6 /* this MUST be MAX_HEIGHT + 1. See about FEB below */ - -/* We need to keep track of who the ancestors of nodes are. When we - perform a search we record which nodes were visited while - descending the tree looking for the node we searched for. This list - of nodes is called the path. This information is used while - performing balancing. Note that this path information may become - invalid, and this means we must check it when using it to see if it - is still valid. You'll need to read search_by_key and the comments - in it, especially about decrement_counters_in_path(), to understand - this structure. - -Paths make the code so much harder to work with and debug.... An -enormous number of bugs are due to them, and trying to write or modify -code that uses them just makes my head hurt. They are based on an -excessive effort to avoid disturbing the precious VFS code.:-( The -gods only know how we are going to SMP the code that uses them. -znodes are the way! */ - -#define PATH_READA 0x1 /* do read ahead */ -#define PATH_READA_BACK 0x2 /* read backwards */ - -struct treepath { - int path_length; /* Length of the array above. */ - int reada; - struct path_element path_elements[EXTENDED_MAX_HEIGHT]; /* Array of the path elements. */ - int pos_in_item; -}; - -#define pos_in_item(path) ((path)->pos_in_item) - -#define INITIALIZE_PATH(var) \ -struct treepath var = {.path_length = ILLEGAL_PATH_ELEMENT_OFFSET, .reada = 0,} - -/* Get path element by path and path position. */ -#define PATH_OFFSET_PELEMENT(path, n_offset) ((path)->path_elements + (n_offset)) - -/* Get buffer header at the path by path and path position. */ -#define PATH_OFFSET_PBUFFER(path, n_offset) (PATH_OFFSET_PELEMENT(path, n_offset)->pe_buffer) - -/* Get position in the element at the path by path and path position. */ -#define PATH_OFFSET_POSITION(path, n_offset) (PATH_OFFSET_PELEMENT(path, n_offset)->pe_position) - -#define PATH_PLAST_BUFFER(path) (PATH_OFFSET_PBUFFER((path), (path)->path_length)) - /* you know, to the person who didn't - write this the macro name does not - at first suggest what it does. - Maybe POSITION_FROM_PATH_END? Or - maybe we should just focus on - dumping paths... -Hans */ -#define PATH_LAST_POSITION(path) (PATH_OFFSET_POSITION((path), (path)->path_length)) - -#define PATH_PITEM_HEAD(path) B_N_PITEM_HEAD(PATH_PLAST_BUFFER(path), PATH_LAST_POSITION(path)) - -/* in do_balance leaf has h == 0 in contrast with path structure, - where root has level == 0. That is why we need these defines */ -#define PATH_H_PBUFFER(path, h) PATH_OFFSET_PBUFFER (path, path->path_length - (h)) /* tb->S[h] */ -#define PATH_H_PPARENT(path, h) PATH_H_PBUFFER (path, (h) + 1) /* tb->F[h] or tb->S[0]->b_parent */ -#define PATH_H_POSITION(path, h) PATH_OFFSET_POSITION (path, path->path_length - (h)) -#define PATH_H_B_ITEM_ORDER(path, h) PATH_H_POSITION(path, h + 1) /* tb->S[h]->b_item_order */ - -#define PATH_H_PATH_OFFSET(path, n_h) ((path)->path_length - (n_h)) - -#define get_last_bh(path) PATH_PLAST_BUFFER(path) -#define get_ih(path) PATH_PITEM_HEAD(path) -#define get_item_pos(path) PATH_LAST_POSITION(path) -#define get_item(path) ((void *)B_N_PITEM(PATH_PLAST_BUFFER(path), PATH_LAST_POSITION (path))) -#define item_moved(ih,path) comp_items(ih, path) -#define path_changed(ih,path) comp_items (ih, path) - -/***************************************************************************/ -/* MISC */ -/***************************************************************************/ - -/* Size of pointer to the unformatted node. */ -#define UNFM_P_SIZE (sizeof(unp_t)) -#define UNFM_P_SHIFT 2 - -// in in-core inode key is stored on le form -#define INODE_PKEY(inode) ((struct reiserfs_key *)(REISERFS_I(inode)->i_key)) - -#define MAX_UL_INT 0xffffffff -#define MAX_INT 0x7ffffff -#define MAX_US_INT 0xffff - -// reiserfs version 2 has max offset 60 bits. Version 1 - 32 bit offset -#define U32_MAX (~(__u32)0) - -static inline loff_t max_reiserfs_offset(struct inode *inode) -{ - if (get_inode_item_key_version(inode) == KEY_FORMAT_3_5) - return (loff_t) U32_MAX; - - return (loff_t) ((~(__u64) 0) >> 4); -} - -/*#define MAX_KEY_UNIQUENESS MAX_UL_INT*/ -#define MAX_KEY_OBJECTID MAX_UL_INT - -#define MAX_B_NUM MAX_UL_INT -#define MAX_FC_NUM MAX_US_INT - -/* the purpose is to detect overflow of an unsigned short */ -#define REISERFS_LINK_MAX (MAX_US_INT - 1000) - -/* The following defines are used in reiserfs_insert_item and reiserfs_append_item */ -#define REISERFS_KERNEL_MEM 0 /* reiserfs kernel memory mode */ -#define REISERFS_USER_MEM 1 /* reiserfs user memory mode */ - -#define fs_generation(s) (REISERFS_SB(s)->s_generation_counter) -#define get_generation(s) atomic_read (&fs_generation(s)) -#define FILESYSTEM_CHANGED_TB(tb) (get_generation((tb)->tb_sb) != (tb)->fs_gen) -#define __fs_changed(gen,s) (gen != get_generation (s)) -#define fs_changed(gen,s) \ -({ \ - reiserfs_cond_resched(s); \ - __fs_changed(gen, s); \ -}) - -/***************************************************************************/ -/* FIXATE NODES */ -/***************************************************************************/ - -#define VI_TYPE_LEFT_MERGEABLE 1 -#define VI_TYPE_RIGHT_MERGEABLE 2 - -/* To make any changes in the tree we always first find node, that - contains item to be changed/deleted or place to insert a new - item. We call this node S. To do balancing we need to decide what - we will shift to left/right neighbor, or to a new node, where new - item will be etc. To make this analysis simpler we build virtual - node. Virtual node is an array of items, that will replace items of - node S. (For instance if we are going to delete an item, virtual - node does not contain it). Virtual node keeps information about - item sizes and types, mergeability of first and last items, sizes - of all entries in directory item. We use this array of items when - calculating what we can shift to neighbors and how many nodes we - have to have if we do not any shiftings, if we shift to left/right - neighbor or to both. */ -struct virtual_item { - int vi_index; // index in the array of item operations - unsigned short vi_type; // left/right mergeability - unsigned short vi_item_len; /* length of item that it will have after balancing */ - struct item_head *vi_ih; - const char *vi_item; // body of item (old or new) - const void *vi_new_data; // 0 always but paste mode - void *vi_uarea; // item specific area -}; - -struct virtual_node { - char *vn_free_ptr; /* this is a pointer to the free space in the buffer */ - unsigned short vn_nr_item; /* number of items in virtual node */ - short vn_size; /* size of node , that node would have if it has unlimited size and no balancing is performed */ - short vn_mode; /* mode of balancing (paste, insert, delete, cut) */ - short vn_affected_item_num; - short vn_pos_in_item; - struct item_head *vn_ins_ih; /* item header of inserted item, 0 for other modes */ - const void *vn_data; - struct virtual_item *vn_vi; /* array of items (including a new one, excluding item to be deleted) */ -}; - -/* used by directory items when creating virtual nodes */ -struct direntry_uarea { - int flags; - __u16 entry_count; - __u16 entry_sizes[1]; -} __attribute__ ((__packed__)); - -/***************************************************************************/ -/* TREE BALANCE */ -/***************************************************************************/ - -/* This temporary structure is used in tree balance algorithms, and - constructed as we go to the extent that its various parts are - needed. It contains arrays of nodes that can potentially be - involved in the balancing of node S, and parameters that define how - each of the nodes must be balanced. Note that in these algorithms - for balancing the worst case is to need to balance the current node - S and the left and right neighbors and all of their parents plus - create a new node. We implement S1 balancing for the leaf nodes - and S0 balancing for the internal nodes (S1 and S0 are defined in - our papers.)*/ - -#define MAX_FREE_BLOCK 7 /* size of the array of buffers to free at end of do_balance */ - -/* maximum number of FEB blocknrs on a single level */ -#define MAX_AMOUNT_NEEDED 2 - -/* someday somebody will prefix every field in this struct with tb_ */ -struct tree_balance { - int tb_mode; - int need_balance_dirty; - struct super_block *tb_sb; - struct reiserfs_transaction_handle *transaction_handle; - struct treepath *tb_path; - struct buffer_head *L[MAX_HEIGHT]; /* array of left neighbors of nodes in the path */ - struct buffer_head *R[MAX_HEIGHT]; /* array of right neighbors of nodes in the path */ - struct buffer_head *FL[MAX_HEIGHT]; /* array of fathers of the left neighbors */ - struct buffer_head *FR[MAX_HEIGHT]; /* array of fathers of the right neighbors */ - struct buffer_head *CFL[MAX_HEIGHT]; /* array of common parents of center node and its left neighbor */ - struct buffer_head *CFR[MAX_HEIGHT]; /* array of common parents of center node and its right neighbor */ - - struct buffer_head *FEB[MAX_FEB_SIZE]; /* array of empty buffers. Number of buffers in array equals - cur_blknum. */ - struct buffer_head *used[MAX_FEB_SIZE]; - struct buffer_head *thrown[MAX_FEB_SIZE]; - int lnum[MAX_HEIGHT]; /* array of number of items which must be - shifted to the left in order to balance the - current node; for leaves includes item that - will be partially shifted; for internal - nodes, it is the number of child pointers - rather than items. It includes the new item - being created. The code sometimes subtracts - one to get the number of wholly shifted - items for other purposes. */ - int rnum[MAX_HEIGHT]; /* substitute right for left in comment above */ - int lkey[MAX_HEIGHT]; /* array indexed by height h mapping the key delimiting L[h] and - S[h] to its item number within the node CFL[h] */ - int rkey[MAX_HEIGHT]; /* substitute r for l in comment above */ - int insert_size[MAX_HEIGHT]; /* the number of bytes by we are trying to add or remove from - S[h]. A negative value means removing. */ - int blknum[MAX_HEIGHT]; /* number of nodes that will replace node S[h] after - balancing on the level h of the tree. If 0 then S is - being deleted, if 1 then S is remaining and no new nodes - are being created, if 2 or 3 then 1 or 2 new nodes is - being created */ - - /* fields that are used only for balancing leaves of the tree */ - int cur_blknum; /* number of empty blocks having been already allocated */ - int s0num; /* number of items that fall into left most node when S[0] splits */ - int s1num; /* number of items that fall into first new node when S[0] splits */ - int s2num; /* number of items that fall into second new node when S[0] splits */ - int lbytes; /* number of bytes which can flow to the left neighbor from the left */ - /* most liquid item that cannot be shifted from S[0] entirely */ - /* if -1 then nothing will be partially shifted */ - int rbytes; /* number of bytes which will flow to the right neighbor from the right */ - /* most liquid item that cannot be shifted from S[0] entirely */ - /* if -1 then nothing will be partially shifted */ - int s1bytes; /* number of bytes which flow to the first new node when S[0] splits */ - /* note: if S[0] splits into 3 nodes, then items do not need to be cut */ - int s2bytes; - struct buffer_head *buf_to_free[MAX_FREE_BLOCK]; /* buffers which are to be freed after do_balance finishes by unfix_nodes */ - char *vn_buf; /* kmalloced memory. Used to create - virtual node and keep map of - dirtied bitmap blocks */ - int vn_buf_size; /* size of the vn_buf */ - struct virtual_node *tb_vn; /* VN starts after bitmap of bitmap blocks */ - - int fs_gen; /* saved value of `reiserfs_generation' counter - see FILESYSTEM_CHANGED() macro in reiserfs_fs.h */ -#ifdef DISPLACE_NEW_PACKING_LOCALITIES - struct in_core_key key; /* key pointer, to pass to block allocator or - another low-level subsystem */ -#endif -}; - -/* These are modes of balancing */ - -/* When inserting an item. */ -#define M_INSERT 'i' -/* When inserting into (directories only) or appending onto an already - existent item. */ -#define M_PASTE 'p' -/* When deleting an item. */ -#define M_DELETE 'd' -/* When truncating an item or removing an entry from a (directory) item. */ -#define M_CUT 'c' - -/* used when balancing on leaf level skipped (in reiserfsck) */ -#define M_INTERNAL 'n' - -/* When further balancing is not needed, then do_balance does not need - to be called. */ -#define M_SKIP_BALANCING 's' -#define M_CONVERT 'v' - -/* modes of leaf_move_items */ -#define LEAF_FROM_S_TO_L 0 -#define LEAF_FROM_S_TO_R 1 -#define LEAF_FROM_R_TO_L 2 -#define LEAF_FROM_L_TO_R 3 -#define LEAF_FROM_S_TO_SNEW 4 - -#define FIRST_TO_LAST 0 -#define LAST_TO_FIRST 1 - -/* used in do_balance for passing parent of node information that has - been gotten from tb struct */ -struct buffer_info { - struct tree_balance *tb; - struct buffer_head *bi_bh; - struct buffer_head *bi_parent; - int bi_position; -}; - -static inline struct super_block *sb_from_tb(struct tree_balance *tb) -{ - return tb ? tb->tb_sb : NULL; -} - -static inline struct super_block *sb_from_bi(struct buffer_info *bi) -{ - return bi ? sb_from_tb(bi->tb) : NULL; -} - -/* there are 4 types of items: stat data, directory item, indirect, direct. -+-------------------+------------+--------------+------------+ -| | k_offset | k_uniqueness | mergeable? | -+-------------------+------------+--------------+------------+ -| stat data | 0 | 0 | no | -+-------------------+------------+--------------+------------+ -| 1st directory item| DOT_OFFSET |DIRENTRY_UNIQUENESS| no | -| non 1st directory | hash value | | yes | -| item | | | | -+-------------------+------------+--------------+------------+ -| indirect item | offset + 1 |TYPE_INDIRECT | if this is not the first indirect item of the object -+-------------------+------------+--------------+------------+ -| direct item | offset + 1 |TYPE_DIRECT | if not this is not the first direct item of the object -+-------------------+------------+--------------+------------+ -*/ - -struct item_operations { - int (*bytes_number) (struct item_head * ih, int block_size); - void (*decrement_key) (struct cpu_key *); - int (*is_left_mergeable) (struct reiserfs_key * ih, - unsigned long bsize); - void (*print_item) (struct item_head *, char *item); - void (*check_item) (struct item_head *, char *item); - - int (*create_vi) (struct virtual_node * vn, struct virtual_item * vi, - int is_affected, int insert_size); - int (*check_left) (struct virtual_item * vi, int free, - int start_skip, int end_skip); - int (*check_right) (struct virtual_item * vi, int free); - int (*part_size) (struct virtual_item * vi, int from, int to); - int (*unit_num) (struct virtual_item * vi); - void (*print_vi) (struct virtual_item * vi); -}; - -extern struct item_operations *item_ops[TYPE_ANY + 1]; - -#define op_bytes_number(ih,bsize) item_ops[le_ih_k_type (ih)]->bytes_number (ih, bsize) -#define op_is_left_mergeable(key,bsize) item_ops[le_key_k_type (le_key_version (key), key)]->is_left_mergeable (key, bsize) -#define op_print_item(ih,item) item_ops[le_ih_k_type (ih)]->print_item (ih, item) -#define op_check_item(ih,item) item_ops[le_ih_k_type (ih)]->check_item (ih, item) -#define op_create_vi(vn,vi,is_affected,insert_size) item_ops[le_ih_k_type ((vi)->vi_ih)]->create_vi (vn,vi,is_affected,insert_size) -#define op_check_left(vi,free,start_skip,end_skip) item_ops[(vi)->vi_index]->check_left (vi, free, start_skip, end_skip) -#define op_check_right(vi,free) item_ops[(vi)->vi_index]->check_right (vi, free) -#define op_part_size(vi,from,to) item_ops[(vi)->vi_index]->part_size (vi, from, to) -#define op_unit_num(vi) item_ops[(vi)->vi_index]->unit_num (vi) -#define op_print_vi(vi) item_ops[(vi)->vi_index]->print_vi (vi) - -#define COMP_SHORT_KEYS comp_short_keys - -/* number of blocks pointed to by the indirect item */ -#define I_UNFM_NUM(ih) (ih_item_len(ih) / UNFM_P_SIZE) - -/* the used space within the unformatted node corresponding to pos within the item pointed to by ih */ -#define I_POS_UNFM_SIZE(ih,pos,size) (((pos) == I_UNFM_NUM(ih) - 1 ) ? (size) - ih_free_space(ih) : (size)) - -/* number of bytes contained by the direct item or the unformatted nodes the indirect item points to */ - -/* get the item header */ -#define B_N_PITEM_HEAD(bh,item_num) ( (struct item_head * )((bh)->b_data + BLKH_SIZE) + (item_num) ) - -/* get key */ -#define B_N_PDELIM_KEY(bh,item_num) ( (struct reiserfs_key * )((bh)->b_data + BLKH_SIZE) + (item_num) ) - -/* get the key */ -#define B_N_PKEY(bh,item_num) ( &(B_N_PITEM_HEAD(bh,item_num)->ih_key) ) - -/* get item body */ -#define B_N_PITEM(bh,item_num) ( (bh)->b_data + ih_location(B_N_PITEM_HEAD((bh),(item_num)))) - -/* get the stat data by the buffer header and the item order */ -#define B_N_STAT_DATA(bh,nr) \ -( (struct stat_data *)((bh)->b_data + ih_location(B_N_PITEM_HEAD((bh),(nr))) ) ) - - /* following defines use reiserfs buffer header and item header */ - -/* get stat-data */ -#define B_I_STAT_DATA(bh, ih) ( (struct stat_data * )((bh)->b_data + ih_location(ih)) ) - -// this is 3976 for size==4096 -#define MAX_DIRECT_ITEM_LEN(size) ((size) - BLKH_SIZE - 2*IH_SIZE - SD_SIZE - UNFM_P_SIZE) - -/* indirect items consist of entries which contain blocknrs, pos - indicates which entry, and B_I_POS_UNFM_POINTER resolves to the - blocknr contained by the entry pos points to */ -#define B_I_POS_UNFM_POINTER(bh,ih,pos) le32_to_cpu(*(((unp_t *)B_I_PITEM(bh,ih)) + (pos))) -#define PUT_B_I_POS_UNFM_POINTER(bh,ih,pos, val) do {*(((unp_t *)B_I_PITEM(bh,ih)) + (pos)) = cpu_to_le32(val); } while (0) - -struct reiserfs_iget_args { - __u32 objectid; - __u32 dirid; -}; - -/***************************************************************************/ -/* FUNCTION DECLARATIONS */ -/***************************************************************************/ - -#define get_journal_desc_magic(bh) (bh->b_data + bh->b_size - 12) - -#define journal_trans_half(blocksize) \ - ((blocksize - sizeof (struct reiserfs_journal_desc) + sizeof (__u32) - 12) / sizeof (__u32)) - -/* journal.c see journal.c for all the comments here */ - -/* first block written in a commit. */ -struct reiserfs_journal_desc { - __le32 j_trans_id; /* id of commit */ - __le32 j_len; /* length of commit. len +1 is the commit block */ - __le32 j_mount_id; /* mount id of this trans */ - __le32 j_realblock[1]; /* real locations for each block */ -}; - -#define get_desc_trans_id(d) le32_to_cpu((d)->j_trans_id) -#define get_desc_trans_len(d) le32_to_cpu((d)->j_len) -#define get_desc_mount_id(d) le32_to_cpu((d)->j_mount_id) - -#define set_desc_trans_id(d,val) do { (d)->j_trans_id = cpu_to_le32 (val); } while (0) -#define set_desc_trans_len(d,val) do { (d)->j_len = cpu_to_le32 (val); } while (0) -#define set_desc_mount_id(d,val) do { (d)->j_mount_id = cpu_to_le32 (val); } while (0) - -/* last block written in a commit */ -struct reiserfs_journal_commit { - __le32 j_trans_id; /* must match j_trans_id from the desc block */ - __le32 j_len; /* ditto */ - __le32 j_realblock[1]; /* real locations for each block */ -}; - -#define get_commit_trans_id(c) le32_to_cpu((c)->j_trans_id) -#define get_commit_trans_len(c) le32_to_cpu((c)->j_len) -#define get_commit_mount_id(c) le32_to_cpu((c)->j_mount_id) - -#define set_commit_trans_id(c,val) do { (c)->j_trans_id = cpu_to_le32 (val); } while (0) -#define set_commit_trans_len(c,val) do { (c)->j_len = cpu_to_le32 (val); } while (0) - -/* this header block gets written whenever a transaction is considered fully flushed, and is more recent than the -** last fully flushed transaction. fully flushed means all the log blocks and all the real blocks are on disk, -** and this transaction does not need to be replayed. -*/ -struct reiserfs_journal_header { - __le32 j_last_flush_trans_id; /* id of last fully flushed transaction */ - __le32 j_first_unflushed_offset; /* offset in the log of where to start replay after a crash */ - __le32 j_mount_id; - /* 12 */ struct journal_params jh_journal; -}; - -/* biggest tunable defines are right here */ -#define JOURNAL_BLOCK_COUNT 8192 /* number of blocks in the journal */ -#define JOURNAL_TRANS_MAX_DEFAULT 1024 /* biggest possible single transaction, don't change for now (8/3/99) */ -#define JOURNAL_TRANS_MIN_DEFAULT 256 -#define JOURNAL_MAX_BATCH_DEFAULT 900 /* max blocks to batch into one transaction, don't make this any bigger than 900 */ -#define JOURNAL_MIN_RATIO 2 -#define JOURNAL_MAX_COMMIT_AGE 30 -#define JOURNAL_MAX_TRANS_AGE 30 -#define JOURNAL_PER_BALANCE_CNT (3 * (MAX_HEIGHT-2) + 9) -#define JOURNAL_BLOCKS_PER_OBJECT(sb) (JOURNAL_PER_BALANCE_CNT * 3 + \ - 2 * (REISERFS_QUOTA_INIT_BLOCKS(sb) + \ - REISERFS_QUOTA_TRANS_BLOCKS(sb))) - -#ifdef CONFIG_QUOTA -#define REISERFS_QUOTA_OPTS ((1 << REISERFS_USRQUOTA) | (1 << REISERFS_GRPQUOTA)) -/* We need to update data and inode (atime) */ -#define REISERFS_QUOTA_TRANS_BLOCKS(s) (REISERFS_SB(s)->s_mount_opt & REISERFS_QUOTA_OPTS ? 2 : 0) -/* 1 balancing, 1 bitmap, 1 data per write + stat data update */ -#define REISERFS_QUOTA_INIT_BLOCKS(s) (REISERFS_SB(s)->s_mount_opt & REISERFS_QUOTA_OPTS ? \ -(DQUOT_INIT_ALLOC*(JOURNAL_PER_BALANCE_CNT+2)+DQUOT_INIT_REWRITE+1) : 0) -/* same as with INIT */ -#define REISERFS_QUOTA_DEL_BLOCKS(s) (REISERFS_SB(s)->s_mount_opt & REISERFS_QUOTA_OPTS ? \ -(DQUOT_DEL_ALLOC*(JOURNAL_PER_BALANCE_CNT+2)+DQUOT_DEL_REWRITE+1) : 0) -#else -#define REISERFS_QUOTA_TRANS_BLOCKS(s) 0 -#define REISERFS_QUOTA_INIT_BLOCKS(s) 0 -#define REISERFS_QUOTA_DEL_BLOCKS(s) 0 -#endif - -/* both of these can be as low as 1, or as high as you want. The min is the -** number of 4k bitmap nodes preallocated on mount. New nodes are allocated -** as needed, and released when transactions are committed. On release, if -** the current number of nodes is > max, the node is freed, otherwise, -** it is put on a free list for faster use later. -*/ -#define REISERFS_MIN_BITMAP_NODES 10 -#define REISERFS_MAX_BITMAP_NODES 100 - -#define JBH_HASH_SHIFT 13 /* these are based on journal hash size of 8192 */ -#define JBH_HASH_MASK 8191 - -#define _jhashfn(sb,block) \ - (((unsigned long)sb>>L1_CACHE_SHIFT) ^ \ - (((block)<<(JBH_HASH_SHIFT - 6)) ^ ((block) >> 13) ^ ((block) << (JBH_HASH_SHIFT - 12)))) -#define journal_hash(t,sb,block) ((t)[_jhashfn((sb),(block)) & JBH_HASH_MASK]) - -// We need these to make journal.c code more readable -#define journal_find_get_block(s, block) __find_get_block(SB_JOURNAL(s)->j_dev_bd, block, s->s_blocksize) -#define journal_getblk(s, block) __getblk(SB_JOURNAL(s)->j_dev_bd, block, s->s_blocksize) -#define journal_bread(s, block) __bread(SB_JOURNAL(s)->j_dev_bd, block, s->s_blocksize) - -enum reiserfs_bh_state_bits { - BH_JDirty = BH_PrivateStart, /* buffer is in current transaction */ - BH_JDirty_wait, - BH_JNew, /* disk block was taken off free list before - * being in a finished transaction, or - * written to disk. Can be reused immed. */ - BH_JPrepared, - BH_JRestore_dirty, - BH_JTest, // debugging only will go away -}; - -BUFFER_FNS(JDirty, journaled); -TAS_BUFFER_FNS(JDirty, journaled); -BUFFER_FNS(JDirty_wait, journal_dirty); -TAS_BUFFER_FNS(JDirty_wait, journal_dirty); -BUFFER_FNS(JNew, journal_new); -TAS_BUFFER_FNS(JNew, journal_new); -BUFFER_FNS(JPrepared, journal_prepared); -TAS_BUFFER_FNS(JPrepared, journal_prepared); -BUFFER_FNS(JRestore_dirty, journal_restore_dirty); -TAS_BUFFER_FNS(JRestore_dirty, journal_restore_dirty); -BUFFER_FNS(JTest, journal_test); -TAS_BUFFER_FNS(JTest, journal_test); - -/* -** transaction handle which is passed around for all journal calls -*/ -struct reiserfs_transaction_handle { - struct super_block *t_super; /* super for this FS when journal_begin was - called. saves calls to reiserfs_get_super - also used by nested transactions to make - sure they are nesting on the right FS - _must_ be first in the handle - */ - int t_refcount; - int t_blocks_logged; /* number of blocks this writer has logged */ - int t_blocks_allocated; /* number of blocks this writer allocated */ - unsigned int t_trans_id; /* sanity check, equals the current trans id */ - void *t_handle_save; /* save existing current->journal_info */ - unsigned displace_new_blocks:1; /* if new block allocation occurres, that block - should be displaced from others */ - struct list_head t_list; -}; - -/* used to keep track of ordered and tail writes, attached to the buffer - * head through b_journal_head. - */ -struct reiserfs_jh { - struct reiserfs_journal_list *jl; - struct buffer_head *bh; - struct list_head list; -}; - -void reiserfs_free_jh(struct buffer_head *bh); -int reiserfs_add_tail_list(struct inode *inode, struct buffer_head *bh); -int reiserfs_add_ordered_list(struct inode *inode, struct buffer_head *bh); -int journal_mark_dirty(struct reiserfs_transaction_handle *, - struct super_block *, struct buffer_head *bh); - -static inline int reiserfs_file_data_log(struct inode *inode) -{ - if (reiserfs_data_log(inode->i_sb) || - (REISERFS_I(inode)->i_flags & i_data_log)) - return 1; - return 0; -} - -static inline int reiserfs_transaction_running(struct super_block *s) -{ - struct reiserfs_transaction_handle *th = current->journal_info; - if (th && th->t_super == s) - return 1; - if (th && th->t_super == NULL) - BUG(); - return 0; -} - -static inline int reiserfs_transaction_free_space(struct reiserfs_transaction_handle *th) -{ - return th->t_blocks_allocated - th->t_blocks_logged; -} - -struct reiserfs_transaction_handle *reiserfs_persistent_transaction(struct - super_block - *, - int count); -int reiserfs_end_persistent_transaction(struct reiserfs_transaction_handle *); -int reiserfs_commit_page(struct inode *inode, struct page *page, - unsigned from, unsigned to); -int reiserfs_flush_old_commits(struct super_block *); -int reiserfs_commit_for_inode(struct inode *); -int reiserfs_inode_needs_commit(struct inode *); -void reiserfs_update_inode_transaction(struct inode *); -void reiserfs_wait_on_write_block(struct super_block *s); -void reiserfs_block_writes(struct reiserfs_transaction_handle *th); -void reiserfs_allow_writes(struct super_block *s); -void reiserfs_check_lock_depth(struct super_block *s, char *caller); -int reiserfs_prepare_for_journal(struct super_block *, struct buffer_head *bh, - int wait); -void reiserfs_restore_prepared_buffer(struct super_block *, - struct buffer_head *bh); -int journal_init(struct super_block *, const char *j_dev_name, int old_format, - unsigned int); -int journal_release(struct reiserfs_transaction_handle *, struct super_block *); -int journal_release_error(struct reiserfs_transaction_handle *, - struct super_block *); -int journal_end(struct reiserfs_transaction_handle *, struct super_block *, - unsigned long); -int journal_end_sync(struct reiserfs_transaction_handle *, struct super_block *, - unsigned long); -int journal_mark_freed(struct reiserfs_transaction_handle *, - struct super_block *, b_blocknr_t blocknr); -int journal_transaction_should_end(struct reiserfs_transaction_handle *, int); -int reiserfs_in_journal(struct super_block *sb, unsigned int bmap_nr, - int bit_nr, int searchall, b_blocknr_t *next); -int journal_begin(struct reiserfs_transaction_handle *, - struct super_block *sb, unsigned long); -int journal_join_abort(struct reiserfs_transaction_handle *, - struct super_block *sb, unsigned long); -void reiserfs_abort_journal(struct super_block *sb, int errno); -void reiserfs_abort(struct super_block *sb, int errno, const char *fmt, ...); -int reiserfs_allocate_list_bitmaps(struct super_block *s, - struct reiserfs_list_bitmap *, unsigned int); - -void add_save_link(struct reiserfs_transaction_handle *th, - struct inode *inode, int truncate); -int remove_save_link(struct inode *inode, int truncate); - -/* objectid.c */ -__u32 reiserfs_get_unused_objectid(struct reiserfs_transaction_handle *th); -void reiserfs_release_objectid(struct reiserfs_transaction_handle *th, - __u32 objectid_to_release); -int reiserfs_convert_objectid_map_v1(struct super_block *); - -/* stree.c */ -int B_IS_IN_TREE(const struct buffer_head *); -extern void copy_item_head(struct item_head *to, - const struct item_head *from); - -// first key is in cpu form, second - le -extern int comp_short_keys(const struct reiserfs_key *le_key, - const struct cpu_key *cpu_key); -extern void le_key2cpu_key(struct cpu_key *to, const struct reiserfs_key *from); - -// both are in le form -extern int comp_le_keys(const struct reiserfs_key *, - const struct reiserfs_key *); -extern int comp_short_le_keys(const struct reiserfs_key *, - const struct reiserfs_key *); - -// -// get key version from on disk key - kludge -// -static inline int le_key_version(const struct reiserfs_key *key) -{ - int type; - - type = offset_v2_k_type(&(key->u.k_offset_v2)); - if (type != TYPE_DIRECT && type != TYPE_INDIRECT - && type != TYPE_DIRENTRY) - return KEY_FORMAT_3_5; - - return KEY_FORMAT_3_6; - -} - -static inline void copy_key(struct reiserfs_key *to, - const struct reiserfs_key *from) -{ - memcpy(to, from, KEY_SIZE); -} - -int comp_items(const struct item_head *stored_ih, const struct treepath *path); -const struct reiserfs_key *get_rkey(const struct treepath *chk_path, - const struct super_block *sb); -int search_by_key(struct super_block *, const struct cpu_key *, - struct treepath *, int); -#define search_item(s,key,path) search_by_key (s, key, path, DISK_LEAF_NODE_LEVEL) -int search_for_position_by_key(struct super_block *sb, - const struct cpu_key *cpu_key, - struct treepath *search_path); -extern void decrement_bcount(struct buffer_head *bh); -void decrement_counters_in_path(struct treepath *search_path); -void pathrelse(struct treepath *search_path); -int reiserfs_check_path(struct treepath *p); -void pathrelse_and_restore(struct super_block *s, struct treepath *search_path); - -int reiserfs_insert_item(struct reiserfs_transaction_handle *th, - struct treepath *path, - const struct cpu_key *key, - struct item_head *ih, - struct inode *inode, const char *body); - -int reiserfs_paste_into_item(struct reiserfs_transaction_handle *th, - struct treepath *path, - const struct cpu_key *key, - struct inode *inode, - const char *body, int paste_size); - -int reiserfs_cut_from_item(struct reiserfs_transaction_handle *th, - struct treepath *path, - struct cpu_key *key, - struct inode *inode, - struct page *page, loff_t new_file_size); - -int reiserfs_delete_item(struct reiserfs_transaction_handle *th, - struct treepath *path, - const struct cpu_key *key, - struct inode *inode, struct buffer_head *un_bh); - -void reiserfs_delete_solid_item(struct reiserfs_transaction_handle *th, - struct inode *inode, struct reiserfs_key *key); -int reiserfs_delete_object(struct reiserfs_transaction_handle *th, - struct inode *inode); -int reiserfs_do_truncate(struct reiserfs_transaction_handle *th, - struct inode *inode, struct page *, - int update_timestamps); - -#define i_block_size(inode) ((inode)->i_sb->s_blocksize) -#define file_size(inode) ((inode)->i_size) -#define tail_size(inode) (file_size (inode) & (i_block_size (inode) - 1)) - -#define tail_has_to_be_packed(inode) (have_large_tails ((inode)->i_sb)?\ -!STORE_TAIL_IN_UNFM_S1(file_size (inode), tail_size(inode), inode->i_sb->s_blocksize):have_small_tails ((inode)->i_sb)?!STORE_TAIL_IN_UNFM_S2(file_size (inode), tail_size(inode), inode->i_sb->s_blocksize):0 ) - -void padd_item(char *item, int total_length, int length); - -/* inode.c */ -/* args for the create parameter of reiserfs_get_block */ -#define GET_BLOCK_NO_CREATE 0 /* don't create new blocks or convert tails */ -#define GET_BLOCK_CREATE 1 /* add anything you need to find block */ -#define GET_BLOCK_NO_HOLE 2 /* return -ENOENT for file holes */ -#define GET_BLOCK_READ_DIRECT 4 /* read the tail if indirect item not found */ -#define GET_BLOCK_NO_IMUX 8 /* i_mutex is not held, don't preallocate */ -#define GET_BLOCK_NO_DANGLE 16 /* don't leave any transactions running */ - -void reiserfs_read_locked_inode(struct inode *inode, - struct reiserfs_iget_args *args); -int reiserfs_find_actor(struct inode *inode, void *p); -int reiserfs_init_locked_inode(struct inode *inode, void *p); -void reiserfs_evict_inode(struct inode *inode); -int reiserfs_write_inode(struct inode *inode, struct writeback_control *wbc); -int reiserfs_get_block(struct inode *inode, sector_t block, - struct buffer_head *bh_result, int create); -struct dentry *reiserfs_fh_to_dentry(struct super_block *sb, struct fid *fid, - int fh_len, int fh_type); -struct dentry *reiserfs_fh_to_parent(struct super_block *sb, struct fid *fid, - int fh_len, int fh_type); -int reiserfs_encode_fh(struct dentry *dentry, __u32 * data, int *lenp, - int connectable); - -int reiserfs_truncate_file(struct inode *, int update_timestamps); -void make_cpu_key(struct cpu_key *cpu_key, struct inode *inode, loff_t offset, - int type, int key_length); -void make_le_item_head(struct item_head *ih, const struct cpu_key *key, - int version, - loff_t offset, int type, int length, int entry_count); -struct inode *reiserfs_iget(struct super_block *s, const struct cpu_key *key); - -struct reiserfs_security_handle; -int reiserfs_new_inode(struct reiserfs_transaction_handle *th, - struct inode *dir, umode_t mode, - const char *symname, loff_t i_size, - struct dentry *dentry, struct inode *inode, - struct reiserfs_security_handle *security); - -void reiserfs_update_sd_size(struct reiserfs_transaction_handle *th, - struct inode *inode, loff_t size); - -static inline void reiserfs_update_sd(struct reiserfs_transaction_handle *th, - struct inode *inode) -{ - reiserfs_update_sd_size(th, inode, inode->i_size); -} - -void sd_attrs_to_i_attrs(__u16 sd_attrs, struct inode *inode); -void i_attrs_to_sd_attrs(struct inode *inode, __u16 * sd_attrs); -int reiserfs_setattr(struct dentry *dentry, struct iattr *attr); - -int __reiserfs_write_begin(struct page *page, unsigned from, unsigned len); - -/* namei.c */ -void set_de_name_and_namelen(struct reiserfs_dir_entry *de); -int search_by_entry_key(struct super_block *sb, const struct cpu_key *key, - struct treepath *path, struct reiserfs_dir_entry *de); -struct dentry *reiserfs_get_parent(struct dentry *); - -#ifdef CONFIG_REISERFS_PROC_INFO -int reiserfs_proc_info_init(struct super_block *sb); -int reiserfs_proc_info_done(struct super_block *sb); -int reiserfs_proc_info_global_init(void); -int reiserfs_proc_info_global_done(void); - -#define PROC_EXP( e ) e - -#define __PINFO( sb ) REISERFS_SB(sb) -> s_proc_info_data -#define PROC_INFO_MAX( sb, field, value ) \ - __PINFO( sb ).field = \ - max( REISERFS_SB( sb ) -> s_proc_info_data.field, value ) -#define PROC_INFO_INC( sb, field ) ( ++ ( __PINFO( sb ).field ) ) -#define PROC_INFO_ADD( sb, field, val ) ( __PINFO( sb ).field += ( val ) ) -#define PROC_INFO_BH_STAT( sb, bh, level ) \ - PROC_INFO_INC( sb, sbk_read_at[ ( level ) ] ); \ - PROC_INFO_ADD( sb, free_at[ ( level ) ], B_FREE_SPACE( bh ) ); \ - PROC_INFO_ADD( sb, items_at[ ( level ) ], B_NR_ITEMS( bh ) ) -#else -static inline int reiserfs_proc_info_init(struct super_block *sb) -{ - return 0; -} - -static inline int reiserfs_proc_info_done(struct super_block *sb) -{ - return 0; -} - -static inline int reiserfs_proc_info_global_init(void) -{ - return 0; -} - -static inline int reiserfs_proc_info_global_done(void) -{ - return 0; -} - -#define PROC_EXP( e ) -#define VOID_V ( ( void ) 0 ) -#define PROC_INFO_MAX( sb, field, value ) VOID_V -#define PROC_INFO_INC( sb, field ) VOID_V -#define PROC_INFO_ADD( sb, field, val ) VOID_V -#define PROC_INFO_BH_STAT(sb, bh, n_node_level) VOID_V -#endif - -/* dir.c */ -extern const struct inode_operations reiserfs_dir_inode_operations; -extern const struct inode_operations reiserfs_symlink_inode_operations; -extern const struct inode_operations reiserfs_special_inode_operations; -extern const struct file_operations reiserfs_dir_operations; -int reiserfs_readdir_dentry(struct dentry *, void *, filldir_t, loff_t *); - -/* tail_conversion.c */ -int direct2indirect(struct reiserfs_transaction_handle *, struct inode *, - struct treepath *, struct buffer_head *, loff_t); -int indirect2direct(struct reiserfs_transaction_handle *, struct inode *, - struct page *, struct treepath *, const struct cpu_key *, - loff_t, char *); -void reiserfs_unmap_buffer(struct buffer_head *); - -/* file.c */ -extern const struct inode_operations reiserfs_file_inode_operations; -extern const struct file_operations reiserfs_file_operations; -extern const struct address_space_operations reiserfs_address_space_operations; - -/* fix_nodes.c */ - -int fix_nodes(int n_op_mode, struct tree_balance *tb, - struct item_head *ins_ih, const void *); -void unfix_nodes(struct tree_balance *); - -/* prints.c */ -void __reiserfs_panic(struct super_block *s, const char *id, - const char *function, const char *fmt, ...) - __attribute__ ((noreturn)); -#define reiserfs_panic(s, id, fmt, args...) \ - __reiserfs_panic(s, id, __func__, fmt, ##args) -void __reiserfs_error(struct super_block *s, const char *id, - const char *function, const char *fmt, ...); -#define reiserfs_error(s, id, fmt, args...) \ - __reiserfs_error(s, id, __func__, fmt, ##args) -void reiserfs_info(struct super_block *s, const char *fmt, ...); -void reiserfs_debug(struct super_block *s, int level, const char *fmt, ...); -void print_indirect_item(struct buffer_head *bh, int item_num); -void store_print_tb(struct tree_balance *tb); -void print_cur_tb(char *mes); -void print_de(struct reiserfs_dir_entry *de); -void print_bi(struct buffer_info *bi, char *mes); -#define PRINT_LEAF_ITEMS 1 /* print all items */ -#define PRINT_DIRECTORY_ITEMS 2 /* print directory items */ -#define PRINT_DIRECT_ITEMS 4 /* print contents of direct items */ -void print_block(struct buffer_head *bh, ...); -void print_bmap(struct super_block *s, int silent); -void print_bmap_block(int i, char *data, int size, int silent); -/*void print_super_block (struct super_block * s, char * mes);*/ -void print_objectid_map(struct super_block *s); -void print_block_head(struct buffer_head *bh, char *mes); -void check_leaf(struct buffer_head *bh); -void check_internal(struct buffer_head *bh); -void print_statistics(struct super_block *s); -char *reiserfs_hashname(int code); - -/* lbalance.c */ -int leaf_move_items(int shift_mode, struct tree_balance *tb, int mov_num, - int mov_bytes, struct buffer_head *Snew); -int leaf_shift_left(struct tree_balance *tb, int shift_num, int shift_bytes); -int leaf_shift_right(struct tree_balance *tb, int shift_num, int shift_bytes); -void leaf_delete_items(struct buffer_info *cur_bi, int last_first, int first, - int del_num, int del_bytes); -void leaf_insert_into_buf(struct buffer_info *bi, int before, - struct item_head *inserted_item_ih, - const char *inserted_item_body, int zeros_number); -void leaf_paste_in_buffer(struct buffer_info *bi, int pasted_item_num, - int pos_in_item, int paste_size, const char *body, - int zeros_number); -void leaf_cut_from_buffer(struct buffer_info *bi, int cut_item_num, - int pos_in_item, int cut_size); -void leaf_paste_entries(struct buffer_info *bi, int item_num, int before, - int new_entry_count, struct reiserfs_de_head *new_dehs, - const char *records, int paste_size); -/* ibalance.c */ -int balance_internal(struct tree_balance *, int, int, struct item_head *, - struct buffer_head **); - -/* do_balance.c */ -void do_balance_mark_leaf_dirty(struct tree_balance *tb, - struct buffer_head *bh, int flag); -#define do_balance_mark_internal_dirty do_balance_mark_leaf_dirty -#define do_balance_mark_sb_dirty do_balance_mark_leaf_dirty - -void do_balance(struct tree_balance *tb, struct item_head *ih, - const char *body, int flag); -void reiserfs_invalidate_buffer(struct tree_balance *tb, - struct buffer_head *bh); - -int get_left_neighbor_position(struct tree_balance *tb, int h); -int get_right_neighbor_position(struct tree_balance *tb, int h); -void replace_key(struct tree_balance *tb, struct buffer_head *, int, - struct buffer_head *, int); -void make_empty_node(struct buffer_info *); -struct buffer_head *get_FEB(struct tree_balance *); - -/* bitmap.c */ - -/* structure contains hints for block allocator, and it is a container for - * arguments, such as node, search path, transaction_handle, etc. */ -struct __reiserfs_blocknr_hint { - struct inode *inode; /* inode passed to allocator, if we allocate unf. nodes */ - sector_t block; /* file offset, in blocks */ - struct in_core_key key; - struct treepath *path; /* search path, used by allocator to deternine search_start by - * various ways */ - struct reiserfs_transaction_handle *th; /* transaction handle is needed to log super blocks and - * bitmap blocks changes */ - b_blocknr_t beg, end; - b_blocknr_t search_start; /* a field used to transfer search start value (block number) - * between different block allocator procedures - * (determine_search_start() and others) */ - int prealloc_size; /* is set in determine_prealloc_size() function, used by underlayed - * function that do actual allocation */ - - unsigned formatted_node:1; /* the allocator uses different polices for getting disk space for - * formatted/unformatted blocks with/without preallocation */ - unsigned preallocate:1; -}; - -typedef struct __reiserfs_blocknr_hint reiserfs_blocknr_hint_t; - -int reiserfs_parse_alloc_options(struct super_block *, char *); -void reiserfs_init_alloc_options(struct super_block *s); - -/* - * given a directory, this will tell you what packing locality - * to use for a new object underneat it. The locality is returned - * in disk byte order (le). - */ -__le32 reiserfs_choose_packing(struct inode *dir); - -int reiserfs_init_bitmap_cache(struct super_block *sb); -void reiserfs_free_bitmap_cache(struct super_block *sb); -void reiserfs_cache_bitmap_metadata(struct super_block *sb, struct buffer_head *bh, struct reiserfs_bitmap_info *info); -struct buffer_head *reiserfs_read_bitmap_block(struct super_block *sb, unsigned int bitmap); -int is_reusable(struct super_block *s, b_blocknr_t block, int bit_value); -void reiserfs_free_block(struct reiserfs_transaction_handle *th, struct inode *, - b_blocknr_t, int for_unformatted); -int reiserfs_allocate_blocknrs(reiserfs_blocknr_hint_t *, b_blocknr_t *, int, - int); -static inline int reiserfs_new_form_blocknrs(struct tree_balance *tb, - b_blocknr_t * new_blocknrs, - int amount_needed) -{ - reiserfs_blocknr_hint_t hint = { - .th = tb->transaction_handle, - .path = tb->tb_path, - .inode = NULL, - .key = tb->key, - .block = 0, - .formatted_node = 1 - }; - return reiserfs_allocate_blocknrs(&hint, new_blocknrs, amount_needed, - 0); -} - -static inline int reiserfs_new_unf_blocknrs(struct reiserfs_transaction_handle - *th, struct inode *inode, - b_blocknr_t * new_blocknrs, - struct treepath *path, - sector_t block) -{ - reiserfs_blocknr_hint_t hint = { - .th = th, - .path = path, - .inode = inode, - .block = block, - .formatted_node = 0, - .preallocate = 0 - }; - return reiserfs_allocate_blocknrs(&hint, new_blocknrs, 1, 0); -} - -#ifdef REISERFS_PREALLOCATE -static inline int reiserfs_new_unf_blocknrs2(struct reiserfs_transaction_handle - *th, struct inode *inode, - b_blocknr_t * new_blocknrs, - struct treepath *path, - sector_t block) -{ - reiserfs_blocknr_hint_t hint = { - .th = th, - .path = path, - .inode = inode, - .block = block, - .formatted_node = 0, - .preallocate = 1 - }; - return reiserfs_allocate_blocknrs(&hint, new_blocknrs, 1, 0); -} - -void reiserfs_discard_prealloc(struct reiserfs_transaction_handle *th, - struct inode *inode); -void reiserfs_discard_all_prealloc(struct reiserfs_transaction_handle *th); -#endif - -/* hashes.c */ -__u32 keyed_hash(const signed char *msg, int len); -__u32 yura_hash(const signed char *msg, int len); -__u32 r5_hash(const signed char *msg, int len); - -#define reiserfs_set_le_bit __set_bit_le -#define reiserfs_test_and_set_le_bit __test_and_set_bit_le -#define reiserfs_clear_le_bit __clear_bit_le -#define reiserfs_test_and_clear_le_bit __test_and_clear_bit_le -#define reiserfs_test_le_bit test_bit_le -#define reiserfs_find_next_zero_le_bit find_next_zero_bit_le - -/* sometimes reiserfs_truncate may require to allocate few new blocks - to perform indirect2direct conversion. People probably used to - think, that truncate should work without problems on a filesystem - without free disk space. They may complain that they can not - truncate due to lack of free disk space. This spare space allows us - to not worry about it. 500 is probably too much, but it should be - absolutely safe */ -#define SPARE_SPACE 500 - -/* prototypes from ioctl.c */ -long reiserfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); -long reiserfs_compat_ioctl(struct file *filp, - unsigned int cmd, unsigned long arg); -int reiserfs_unpack(struct inode *inode, struct file *filp); - -#endif /* __KERNEL__ */ - #endif /* _LINUX_REISER_FS_H */ diff --git a/include/linux/reiserfs_fs_i.h b/include/linux/reiserfs_fs_i.h deleted file mode 100644 index 97959bdfe214..000000000000 --- a/include/linux/reiserfs_fs_i.h +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef _REISER_FS_I -#define _REISER_FS_I - -#include <linux/list.h> - -struct reiserfs_journal_list; - -/** bitmasks for i_flags field in reiserfs-specific part of inode */ -typedef enum { - /** this says what format of key do all items (but stat data) of - an object have. If this is set, that format is 3.6 otherwise - - 3.5 */ - i_item_key_version_mask = 0x0001, - /** If this is unset, object has 3.5 stat data, otherwise, it has - 3.6 stat data with 64bit size, 32bit nlink etc. */ - i_stat_data_version_mask = 0x0002, - /** file might need tail packing on close */ - i_pack_on_close_mask = 0x0004, - /** don't pack tail of file */ - i_nopack_mask = 0x0008, - /** If those is set, "safe link" was created for this file during - truncate or unlink. Safe link is used to avoid leakage of disk - space on crash with some files open, but unlinked. */ - i_link_saved_unlink_mask = 0x0010, - i_link_saved_truncate_mask = 0x0020, - i_has_xattr_dir = 0x0040, - i_data_log = 0x0080, -} reiserfs_inode_flags; - -struct reiserfs_inode_info { - __u32 i_key[4]; /* key is still 4 32 bit integers */ - /** transient inode flags that are never stored on disk. Bitmasks - for this field are defined above. */ - __u32 i_flags; - - __u32 i_first_direct_byte; // offset of first byte stored in direct item. - - /* copy of persistent inode flags read from sd_attrs. */ - __u32 i_attrs; - - int i_prealloc_block; /* first unused block of a sequence of unused blocks */ - int i_prealloc_count; /* length of that sequence */ - struct list_head i_prealloc_list; /* per-transaction list of inodes which - * have preallocated blocks */ - - unsigned new_packing_locality:1; /* new_packig_locality is created; new blocks - * for the contents of this directory should be - * displaced */ - - /* we use these for fsync or O_SYNC to decide which transaction - ** needs to be committed in order for this inode to be properly - ** flushed */ - unsigned int i_trans_id; - struct reiserfs_journal_list *i_jl; - atomic_t openers; - struct mutex tailpack; -#ifdef CONFIG_REISERFS_FS_XATTR - struct rw_semaphore i_xattr_sem; -#endif - struct inode vfs_inode; -}; - -#endif diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h deleted file mode 100644 index 8c9e85c64b46..000000000000 --- a/include/linux/reiserfs_fs_sb.h +++ /dev/null @@ -1,554 +0,0 @@ -/* Copyright 1996-2000 Hans Reiser, see reiserfs/README for licensing - * and copyright details */ - -#ifndef _LINUX_REISER_FS_SB -#define _LINUX_REISER_FS_SB - -#ifdef __KERNEL__ -#include <linux/workqueue.h> -#include <linux/rwsem.h> -#include <linux/mutex.h> -#include <linux/sched.h> -#endif - -typedef enum { - reiserfs_attrs_cleared = 0x00000001, -} reiserfs_super_block_flags; - -/* struct reiserfs_super_block accessors/mutators - * since this is a disk structure, it will always be in - * little endian format. */ -#define sb_block_count(sbp) (le32_to_cpu((sbp)->s_v1.s_block_count)) -#define set_sb_block_count(sbp,v) ((sbp)->s_v1.s_block_count = cpu_to_le32(v)) -#define sb_free_blocks(sbp) (le32_to_cpu((sbp)->s_v1.s_free_blocks)) -#define set_sb_free_blocks(sbp,v) ((sbp)->s_v1.s_free_blocks = cpu_to_le32(v)) -#define sb_root_block(sbp) (le32_to_cpu((sbp)->s_v1.s_root_block)) -#define set_sb_root_block(sbp,v) ((sbp)->s_v1.s_root_block = cpu_to_le32(v)) - -#define sb_jp_journal_1st_block(sbp) \ - (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_1st_block)) -#define set_sb_jp_journal_1st_block(sbp,v) \ - ((sbp)->s_v1.s_journal.jp_journal_1st_block = cpu_to_le32(v)) -#define sb_jp_journal_dev(sbp) \ - (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_dev)) -#define set_sb_jp_journal_dev(sbp,v) \ - ((sbp)->s_v1.s_journal.jp_journal_dev = cpu_to_le32(v)) -#define sb_jp_journal_size(sbp) \ - (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_size)) -#define set_sb_jp_journal_size(sbp,v) \ - ((sbp)->s_v1.s_journal.jp_journal_size = cpu_to_le32(v)) -#define sb_jp_journal_trans_max(sbp) \ - (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_trans_max)) -#define set_sb_jp_journal_trans_max(sbp,v) \ - ((sbp)->s_v1.s_journal.jp_journal_trans_max = cpu_to_le32(v)) -#define sb_jp_journal_magic(sbp) \ - (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_magic)) -#define set_sb_jp_journal_magic(sbp,v) \ - ((sbp)->s_v1.s_journal.jp_journal_magic = cpu_to_le32(v)) -#define sb_jp_journal_max_batch(sbp) \ - (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_max_batch)) -#define set_sb_jp_journal_max_batch(sbp,v) \ - ((sbp)->s_v1.s_journal.jp_journal_max_batch = cpu_to_le32(v)) -#define sb_jp_jourmal_max_commit_age(sbp) \ - (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_max_commit_age)) -#define set_sb_jp_journal_max_commit_age(sbp,v) \ - ((sbp)->s_v1.s_journal.jp_journal_max_commit_age = cpu_to_le32(v)) - -#define sb_blocksize(sbp) (le16_to_cpu((sbp)->s_v1.s_blocksize)) -#define set_sb_blocksize(sbp,v) ((sbp)->s_v1.s_blocksize = cpu_to_le16(v)) -#define sb_oid_maxsize(sbp) (le16_to_cpu((sbp)->s_v1.s_oid_maxsize)) -#define set_sb_oid_maxsize(sbp,v) ((sbp)->s_v1.s_oid_maxsize = cpu_to_le16(v)) -#define sb_oid_cursize(sbp) (le16_to_cpu((sbp)->s_v1.s_oid_cursize)) -#define set_sb_oid_cursize(sbp,v) ((sbp)->s_v1.s_oid_cursize = cpu_to_le16(v)) -#define sb_umount_state(sbp) (le16_to_cpu((sbp)->s_v1.s_umount_state)) -#define set_sb_umount_state(sbp,v) ((sbp)->s_v1.s_umount_state = cpu_to_le16(v)) -#define sb_fs_state(sbp) (le16_to_cpu((sbp)->s_v1.s_fs_state)) -#define set_sb_fs_state(sbp,v) ((sbp)->s_v1.s_fs_state = cpu_to_le16(v)) -#define sb_hash_function_code(sbp) \ - (le32_to_cpu((sbp)->s_v1.s_hash_function_code)) -#define set_sb_hash_function_code(sbp,v) \ - ((sbp)->s_v1.s_hash_function_code = cpu_to_le32(v)) -#define sb_tree_height(sbp) (le16_to_cpu((sbp)->s_v1.s_tree_height)) -#define set_sb_tree_height(sbp,v) ((sbp)->s_v1.s_tree_height = cpu_to_le16(v)) -#define sb_bmap_nr(sbp) (le16_to_cpu((sbp)->s_v1.s_bmap_nr)) -#define set_sb_bmap_nr(sbp,v) ((sbp)->s_v1.s_bmap_nr = cpu_to_le16(v)) -#define sb_version(sbp) (le16_to_cpu((sbp)->s_v1.s_version)) -#define set_sb_version(sbp,v) ((sbp)->s_v1.s_version = cpu_to_le16(v)) - -#define sb_mnt_count(sbp) (le16_to_cpu((sbp)->s_mnt_count)) -#define set_sb_mnt_count(sbp, v) ((sbp)->s_mnt_count = cpu_to_le16(v)) - -#define sb_reserved_for_journal(sbp) \ - (le16_to_cpu((sbp)->s_v1.s_reserved_for_journal)) -#define set_sb_reserved_for_journal(sbp,v) \ - ((sbp)->s_v1.s_reserved_for_journal = cpu_to_le16(v)) - -/* LOGGING -- */ - -/* These all interelate for performance. -** -** If the journal block count is smaller than n transactions, you lose speed. -** I don't know what n is yet, I'm guessing 8-16. -** -** typical transaction size depends on the application, how often fsync is -** called, and how many metadata blocks you dirty in a 30 second period. -** The more small files (<16k) you use, the larger your transactions will -** be. -** -** If your journal fills faster than dirty buffers get flushed to disk, it must flush them before allowing the journal -** to wrap, which slows things down. If you need high speed meta data updates, the journal should be big enough -** to prevent wrapping before dirty meta blocks get to disk. -** -** If the batch max is smaller than the transaction max, you'll waste space at the end of the journal -** because journal_end sets the next transaction to start at 0 if the next transaction has any chance of wrapping. -** -** The large the batch max age, the better the speed, and the more meta data changes you'll lose after a crash. -** -*/ - -/* don't mess with these for a while */ - /* we have a node size define somewhere in reiserfs_fs.h. -Hans */ -#define JOURNAL_BLOCK_SIZE 4096 /* BUG gotta get rid of this */ -#define JOURNAL_MAX_CNODE 1500 /* max cnodes to allocate. */ -#define JOURNAL_HASH_SIZE 8192 -#define JOURNAL_NUM_BITMAPS 5 /* number of copies of the bitmaps to have floating. Must be >= 2 */ - -/* One of these for every block in every transaction -** Each one is in two hash tables. First, a hash of the current transaction, and after journal_end, a -** hash of all the in memory transactions. -** next and prev are used by the current transaction (journal_hash). -** hnext and hprev are used by journal_list_hash. If a block is in more than one transaction, the journal_list_hash -** links it in multiple times. This allows flush_journal_list to remove just the cnode belonging -** to a given transaction. -*/ -struct reiserfs_journal_cnode { - struct buffer_head *bh; /* real buffer head */ - struct super_block *sb; /* dev of real buffer head */ - __u32 blocknr; /* block number of real buffer head, == 0 when buffer on disk */ - unsigned long state; - struct reiserfs_journal_list *jlist; /* journal list this cnode lives in */ - struct reiserfs_journal_cnode *next; /* next in transaction list */ - struct reiserfs_journal_cnode *prev; /* prev in transaction list */ - struct reiserfs_journal_cnode *hprev; /* prev in hash list */ - struct reiserfs_journal_cnode *hnext; /* next in hash list */ -}; - -struct reiserfs_bitmap_node { - int id; - char *data; - struct list_head list; -}; - -struct reiserfs_list_bitmap { - struct reiserfs_journal_list *journal_list; - struct reiserfs_bitmap_node **bitmaps; -}; - -/* -** one of these for each transaction. The most important part here is the j_realblock. -** this list of cnodes is used to hash all the blocks in all the commits, to mark all the -** real buffer heads dirty once all the commits hit the disk, -** and to make sure every real block in a transaction is on disk before allowing the log area -** to be overwritten */ -struct reiserfs_journal_list { - unsigned long j_start; - unsigned long j_state; - unsigned long j_len; - atomic_t j_nonzerolen; - atomic_t j_commit_left; - atomic_t j_older_commits_done; /* all commits older than this on disk */ - struct mutex j_commit_mutex; - unsigned int j_trans_id; - time_t j_timestamp; - struct reiserfs_list_bitmap *j_list_bitmap; - struct buffer_head *j_commit_bh; /* commit buffer head */ - struct reiserfs_journal_cnode *j_realblock; - struct reiserfs_journal_cnode *j_freedlist; /* list of buffers that were freed during this trans. free each of these on flush */ - /* time ordered list of all active transactions */ - struct list_head j_list; - - /* time ordered list of all transactions we haven't tried to flush yet */ - struct list_head j_working_list; - - /* list of tail conversion targets in need of flush before commit */ - struct list_head j_tail_bh_list; - /* list of data=ordered buffers in need of flush before commit */ - struct list_head j_bh_list; - int j_refcount; -}; - -struct reiserfs_journal { - struct buffer_head **j_ap_blocks; /* journal blocks on disk */ - struct reiserfs_journal_cnode *j_last; /* newest journal block */ - struct reiserfs_journal_cnode *j_first; /* oldest journal block. start here for traverse */ - - struct block_device *j_dev_bd; - fmode_t j_dev_mode; - int j_1st_reserved_block; /* first block on s_dev of reserved area journal */ - - unsigned long j_state; - unsigned int j_trans_id; - unsigned long j_mount_id; - unsigned long j_start; /* start of current waiting commit (index into j_ap_blocks) */ - unsigned long j_len; /* length of current waiting commit */ - unsigned long j_len_alloc; /* number of buffers requested by journal_begin() */ - atomic_t j_wcount; /* count of writers for current commit */ - unsigned long j_bcount; /* batch count. allows turning X transactions into 1 */ - unsigned long j_first_unflushed_offset; /* first unflushed transactions offset */ - unsigned j_last_flush_trans_id; /* last fully flushed journal timestamp */ - struct buffer_head *j_header_bh; - - time_t j_trans_start_time; /* time this transaction started */ - struct mutex j_mutex; - struct mutex j_flush_mutex; - wait_queue_head_t j_join_wait; /* wait for current transaction to finish before starting new one */ - atomic_t j_jlock; /* lock for j_join_wait */ - int j_list_bitmap_index; /* number of next list bitmap to use */ - int j_must_wait; /* no more journal begins allowed. MUST sleep on j_join_wait */ - int j_next_full_flush; /* next journal_end will flush all journal list */ - int j_next_async_flush; /* next journal_end will flush all async commits */ - - int j_cnode_used; /* number of cnodes on the used list */ - int j_cnode_free; /* number of cnodes on the free list */ - - unsigned int j_trans_max; /* max number of blocks in a transaction. */ - unsigned int j_max_batch; /* max number of blocks to batch into a trans */ - unsigned int j_max_commit_age; /* in seconds, how old can an async commit be */ - unsigned int j_max_trans_age; /* in seconds, how old can a transaction be */ - unsigned int j_default_max_commit_age; /* the default for the max commit age */ - - struct reiserfs_journal_cnode *j_cnode_free_list; - struct reiserfs_journal_cnode *j_cnode_free_orig; /* orig pointer returned from vmalloc */ - - struct reiserfs_journal_list *j_current_jl; - int j_free_bitmap_nodes; - int j_used_bitmap_nodes; - - int j_num_lists; /* total number of active transactions */ - int j_num_work_lists; /* number that need attention from kreiserfsd */ - - /* debugging to make sure things are flushed in order */ - unsigned int j_last_flush_id; - - /* debugging to make sure things are committed in order */ - unsigned int j_last_commit_id; - - struct list_head j_bitmap_nodes; - struct list_head j_dirty_buffers; - spinlock_t j_dirty_buffers_lock; /* protects j_dirty_buffers */ - - /* list of all active transactions */ - struct list_head j_journal_list; - /* lists that haven't been touched by writeback attempts */ - struct list_head j_working_list; - - struct reiserfs_list_bitmap j_list_bitmap[JOURNAL_NUM_BITMAPS]; /* array of bitmaps to record the deleted blocks */ - struct reiserfs_journal_cnode *j_hash_table[JOURNAL_HASH_SIZE]; /* hash table for real buffer heads in current trans */ - struct reiserfs_journal_cnode *j_list_hash_table[JOURNAL_HASH_SIZE]; /* hash table for all the real buffer heads in all - the transactions */ - struct list_head j_prealloc_list; /* list of inodes which have preallocated blocks */ - int j_persistent_trans; - unsigned long j_max_trans_size; - unsigned long j_max_batch_size; - - int j_errno; - - /* when flushing ordered buffers, throttle new ordered writers */ - struct delayed_work j_work; - struct super_block *j_work_sb; - atomic_t j_async_throttle; -}; - -enum journal_state_bits { - J_WRITERS_BLOCKED = 1, /* set when new writers not allowed */ - J_WRITERS_QUEUED, /* set when log is full due to too many writers */ - J_ABORTED, /* set when log is aborted */ -}; - -#define JOURNAL_DESC_MAGIC "ReIsErLB" /* ick. magic string to find desc blocks in the journal */ - -typedef __u32(*hashf_t) (const signed char *, int); - -struct reiserfs_bitmap_info { - __u32 free_count; -}; - -struct proc_dir_entry; - -#if defined( CONFIG_PROC_FS ) && defined( CONFIG_REISERFS_PROC_INFO ) -typedef unsigned long int stat_cnt_t; -typedef struct reiserfs_proc_info_data { - spinlock_t lock; - int exiting; - int max_hash_collisions; - - stat_cnt_t breads; - stat_cnt_t bread_miss; - stat_cnt_t search_by_key; - stat_cnt_t search_by_key_fs_changed; - stat_cnt_t search_by_key_restarted; - - stat_cnt_t insert_item_restarted; - stat_cnt_t paste_into_item_restarted; - stat_cnt_t cut_from_item_restarted; - stat_cnt_t delete_solid_item_restarted; - stat_cnt_t delete_item_restarted; - - stat_cnt_t leaked_oid; - stat_cnt_t leaves_removable; - - /* balances per level. Use explicit 5 as MAX_HEIGHT is not visible yet. */ - stat_cnt_t balance_at[5]; /* XXX */ - /* sbk == search_by_key */ - stat_cnt_t sbk_read_at[5]; /* XXX */ - stat_cnt_t sbk_fs_changed[5]; - stat_cnt_t sbk_restarted[5]; - stat_cnt_t items_at[5]; /* XXX */ - stat_cnt_t free_at[5]; /* XXX */ - stat_cnt_t can_node_be_removed[5]; /* XXX */ - long int lnum[5]; /* XXX */ - long int rnum[5]; /* XXX */ - long int lbytes[5]; /* XXX */ - long int rbytes[5]; /* XXX */ - stat_cnt_t get_neighbors[5]; - stat_cnt_t get_neighbors_restart[5]; - stat_cnt_t need_l_neighbor[5]; - stat_cnt_t need_r_neighbor[5]; - - stat_cnt_t free_block; - struct __scan_bitmap_stats { - stat_cnt_t call; - stat_cnt_t wait; - stat_cnt_t bmap; - stat_cnt_t retry; - stat_cnt_t in_journal_hint; - stat_cnt_t in_journal_nohint; - stat_cnt_t stolen; - } scan_bitmap; - struct __journal_stats { - stat_cnt_t in_journal; - stat_cnt_t in_journal_bitmap; - stat_cnt_t in_journal_reusable; - stat_cnt_t lock_journal; - stat_cnt_t lock_journal_wait; - stat_cnt_t journal_being; - stat_cnt_t journal_relock_writers; - stat_cnt_t journal_relock_wcount; - stat_cnt_t mark_dirty; - stat_cnt_t mark_dirty_already; - stat_cnt_t mark_dirty_notjournal; - stat_cnt_t restore_prepared; - stat_cnt_t prepare; - stat_cnt_t prepare_retry; - } journal; -} reiserfs_proc_info_data_t; -#else -typedef struct reiserfs_proc_info_data { -} reiserfs_proc_info_data_t; -#endif - -/* reiserfs union of in-core super block data */ -struct reiserfs_sb_info { - struct buffer_head *s_sbh; /* Buffer containing the super block */ - /* both the comment and the choice of - name are unclear for s_rs -Hans */ - struct reiserfs_super_block *s_rs; /* Pointer to the super block in the buffer */ - struct reiserfs_bitmap_info *s_ap_bitmap; - struct reiserfs_journal *s_journal; /* pointer to journal information */ - unsigned short s_mount_state; /* reiserfs state (valid, invalid) */ - - /* Serialize writers access, replace the old bkl */ - struct mutex lock; - /* Owner of the lock (can be recursive) */ - struct task_struct *lock_owner; - /* Depth of the lock, start from -1 like the bkl */ - int lock_depth; - - /* Comment? -Hans */ - void (*end_io_handler) (struct buffer_head *, int); - hashf_t s_hash_function; /* pointer to function which is used - to sort names in directory. Set on - mount */ - unsigned long s_mount_opt; /* reiserfs's mount options are set - here (currently - NOTAIL, NOLOG, - REPLAYONLY) */ - - struct { /* This is a structure that describes block allocator options */ - unsigned long bits; /* Bitfield for enable/disable kind of options */ - unsigned long large_file_size; /* size started from which we consider file to be a large one(in blocks) */ - int border; /* percentage of disk, border takes */ - int preallocmin; /* Minimal file size (in blocks) starting from which we do preallocations */ - int preallocsize; /* Number of blocks we try to prealloc when file - reaches preallocmin size (in blocks) or - prealloc_list is empty. */ - } s_alloc_options; - - /* Comment? -Hans */ - wait_queue_head_t s_wait; - /* To be obsoleted soon by per buffer seals.. -Hans */ - atomic_t s_generation_counter; // increased by one every time the - // tree gets re-balanced - unsigned long s_properties; /* File system properties. Currently holds - on-disk FS format */ - - /* session statistics */ - int s_disk_reads; - int s_disk_writes; - int s_fix_nodes; - int s_do_balance; - int s_unneeded_left_neighbor; - int s_good_search_by_key_reada; - int s_bmaps; - int s_bmaps_without_search; - int s_direct2indirect; - int s_indirect2direct; - /* set up when it's ok for reiserfs_read_inode2() to read from - disk inode with nlink==0. Currently this is only used during - finish_unfinished() processing at mount time */ - int s_is_unlinked_ok; - reiserfs_proc_info_data_t s_proc_info_data; - struct proc_dir_entry *procdir; - int reserved_blocks; /* amount of blocks reserved for further allocations */ - spinlock_t bitmap_lock; /* this lock on now only used to protect reserved_blocks variable */ - struct dentry *priv_root; /* root of /.reiserfs_priv */ - struct dentry *xattr_root; /* root of /.reiserfs_priv/xattrs */ - int j_errno; -#ifdef CONFIG_QUOTA - char *s_qf_names[MAXQUOTAS]; - int s_jquota_fmt; -#endif - char *s_jdev; /* Stored jdev for mount option showing */ -#ifdef CONFIG_REISERFS_CHECK - - struct tree_balance *cur_tb; /* - * Detects whether more than one - * copy of tb exists per superblock - * as a means of checking whether - * do_balance is executing concurrently - * against another tree reader/writer - * on a same mount point. - */ -#endif -}; - -/* Definitions of reiserfs on-disk properties: */ -#define REISERFS_3_5 0 -#define REISERFS_3_6 1 -#define REISERFS_OLD_FORMAT 2 - -enum reiserfs_mount_options { -/* Mount options */ - REISERFS_LARGETAIL, /* large tails will be created in a session */ - REISERFS_SMALLTAIL, /* small (for files less than block size) tails will be created in a session */ - REPLAYONLY, /* replay journal and return 0. Use by fsck */ - REISERFS_CONVERT, /* -o conv: causes conversion of old - format super block to the new - format. If not specified - old - partition will be dealt with in a - manner of 3.5.x */ - -/* -o hash={tea, rupasov, r5, detect} is meant for properly mounting -** reiserfs disks from 3.5.19 or earlier. 99% of the time, this option -** is not required. If the normal autodection code can't determine which -** hash to use (because both hashes had the same value for a file) -** use this option to force a specific hash. It won't allow you to override -** the existing hash on the FS, so if you have a tea hash disk, and mount -** with -o hash=rupasov, the mount will fail. -*/ - FORCE_TEA_HASH, /* try to force tea hash on mount */ - FORCE_RUPASOV_HASH, /* try to force rupasov hash on mount */ - FORCE_R5_HASH, /* try to force rupasov hash on mount */ - FORCE_HASH_DETECT, /* try to detect hash function on mount */ - - REISERFS_DATA_LOG, - REISERFS_DATA_ORDERED, - REISERFS_DATA_WRITEBACK, - -/* used for testing experimental features, makes benchmarking new - features with and without more convenient, should never be used by - users in any code shipped to users (ideally) */ - - REISERFS_NO_BORDER, - REISERFS_NO_UNHASHED_RELOCATION, - REISERFS_HASHED_RELOCATION, - REISERFS_ATTRS, - REISERFS_XATTRS_USER, - REISERFS_POSIXACL, - REISERFS_EXPOSE_PRIVROOT, - REISERFS_BARRIER_NONE, - REISERFS_BARRIER_FLUSH, - - /* Actions on error */ - REISERFS_ERROR_PANIC, - REISERFS_ERROR_RO, - REISERFS_ERROR_CONTINUE, - - REISERFS_USRQUOTA, /* User quota option specified */ - REISERFS_GRPQUOTA, /* Group quota option specified */ - - REISERFS_TEST1, - REISERFS_TEST2, - REISERFS_TEST3, - REISERFS_TEST4, - REISERFS_UNSUPPORTED_OPT, -}; - -#define reiserfs_r5_hash(s) (REISERFS_SB(s)->s_mount_opt & (1 << FORCE_R5_HASH)) -#define reiserfs_rupasov_hash(s) (REISERFS_SB(s)->s_mount_opt & (1 << FORCE_RUPASOV_HASH)) -#define reiserfs_tea_hash(s) (REISERFS_SB(s)->s_mount_opt & (1 << FORCE_TEA_HASH)) -#define reiserfs_hash_detect(s) (REISERFS_SB(s)->s_mount_opt & (1 << FORCE_HASH_DETECT)) -#define reiserfs_no_border(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_NO_BORDER)) -#define reiserfs_no_unhashed_relocation(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_NO_UNHASHED_RELOCATION)) -#define reiserfs_hashed_relocation(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_HASHED_RELOCATION)) -#define reiserfs_test4(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_TEST4)) - -#define have_large_tails(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_LARGETAIL)) -#define have_small_tails(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_SMALLTAIL)) -#define replay_only(s) (REISERFS_SB(s)->s_mount_opt & (1 << REPLAYONLY)) -#define reiserfs_attrs(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_ATTRS)) -#define old_format_only(s) (REISERFS_SB(s)->s_properties & (1 << REISERFS_3_5)) -#define convert_reiserfs(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_CONVERT)) -#define reiserfs_data_log(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_LOG)) -#define reiserfs_data_ordered(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_ORDERED)) -#define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK)) -#define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER)) -#define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL)) -#define reiserfs_expose_privroot(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_EXPOSE_PRIVROOT)) -#define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s)) -#define reiserfs_barrier_none(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_NONE)) -#define reiserfs_barrier_flush(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_FLUSH)) - -#define reiserfs_error_panic(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_ERROR_PANIC)) -#define reiserfs_error_ro(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_ERROR_RO)) - -void reiserfs_file_buffer(struct buffer_head *bh, int list); -extern struct file_system_type reiserfs_fs_type; -int reiserfs_resize(struct super_block *, unsigned long); - -#define CARRY_ON 0 -#define SCHEDULE_OCCURRED 1 - -#define SB_BUFFER_WITH_SB(s) (REISERFS_SB(s)->s_sbh) -#define SB_JOURNAL(s) (REISERFS_SB(s)->s_journal) -#define SB_JOURNAL_1st_RESERVED_BLOCK(s) (SB_JOURNAL(s)->j_1st_reserved_block) -#define SB_JOURNAL_LEN_FREE(s) (SB_JOURNAL(s)->j_journal_len_free) -#define SB_AP_BITMAP(s) (REISERFS_SB(s)->s_ap_bitmap) - -#define SB_DISK_JOURNAL_HEAD(s) (SB_JOURNAL(s)->j_header_bh->) - -/* A safe version of the "bdevname", which returns the "s_id" field of - * a superblock or else "Null superblock" if the super block is NULL. - */ -static inline char *reiserfs_bdevname(struct super_block *s) -{ - return (s == NULL) ? "Null superblock" : s->s_id; -} - -#define reiserfs_is_journal_aborted(journal) (unlikely (__reiserfs_is_journal_aborted (journal))) -static inline int __reiserfs_is_journal_aborted(struct reiserfs_journal - *journal) -{ - return test_bit(J_ABORTED, &journal->j_state); -} - -#endif /* _LINUX_REISER_FS_SB */ diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h index c2b71473266e..d8ce17c2459a 100644 --- a/include/linux/reiserfs_xattr.h +++ b/include/linux/reiserfs_xattr.h @@ -21,132 +21,4 @@ struct reiserfs_security_handle { size_t length; }; -#ifdef __KERNEL__ - -#include <linux/init.h> -#include <linux/list.h> -#include <linux/rwsem.h> -#include <linux/reiserfs_fs_i.h> -#include <linux/reiserfs_fs.h> - -struct inode; -struct dentry; -struct iattr; -struct super_block; -struct nameidata; - -int reiserfs_xattr_register_handlers(void) __init; -void reiserfs_xattr_unregister_handlers(void); -int reiserfs_xattr_init(struct super_block *sb, int mount_flags); -int reiserfs_lookup_privroot(struct super_block *sb); -int reiserfs_delete_xattrs(struct inode *inode); -int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs); -int reiserfs_permission(struct inode *inode, int mask); - -#ifdef CONFIG_REISERFS_FS_XATTR -#define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir) -ssize_t reiserfs_getxattr(struct dentry *dentry, const char *name, - void *buffer, size_t size); -int reiserfs_setxattr(struct dentry *dentry, const char *name, - const void *value, size_t size, int flags); -ssize_t reiserfs_listxattr(struct dentry *dentry, char *buffer, size_t size); -int reiserfs_removexattr(struct dentry *dentry, const char *name); - -int reiserfs_xattr_get(struct inode *, const char *, void *, size_t); -int reiserfs_xattr_set(struct inode *, const char *, const void *, size_t, int); -int reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *, - struct inode *, const char *, const void *, - size_t, int); - -extern const struct xattr_handler reiserfs_xattr_user_handler; -extern const struct xattr_handler reiserfs_xattr_trusted_handler; -extern const struct xattr_handler reiserfs_xattr_security_handler; -#ifdef CONFIG_REISERFS_FS_SECURITY -int reiserfs_security_init(struct inode *dir, struct inode *inode, - const struct qstr *qstr, - struct reiserfs_security_handle *sec); -int reiserfs_security_write(struct reiserfs_transaction_handle *th, - struct inode *inode, - struct reiserfs_security_handle *sec); -void reiserfs_security_free(struct reiserfs_security_handle *sec); -#endif - -static inline int reiserfs_xattrs_initialized(struct super_block *sb) -{ - return REISERFS_SB(sb)->priv_root != NULL; -} - -#define xattr_size(size) ((size) + sizeof(struct reiserfs_xattr_header)) -static inline loff_t reiserfs_xattr_nblocks(struct inode *inode, loff_t size) -{ - loff_t ret = 0; - if (reiserfs_file_data_log(inode)) { - ret = _ROUND_UP(xattr_size(size), inode->i_sb->s_blocksize); - ret >>= inode->i_sb->s_blocksize_bits; - } - return ret; -} - -/* We may have to create up to 3 objects: xattr root, xattr dir, xattr file. - * Let's try to be smart about it. - * xattr root: We cache it. If it's not cached, we may need to create it. - * xattr dir: If anything has been loaded for this inode, we can set a flag - * saying so. - * xattr file: Since we don't cache xattrs, we can't tell. We always include - * blocks for it. - * - * However, since root and dir can be created between calls - YOU MUST SAVE - * THIS VALUE. - */ -static inline size_t reiserfs_xattr_jcreate_nblocks(struct inode *inode) -{ - size_t nblocks = JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb); - - if ((REISERFS_I(inode)->i_flags & i_has_xattr_dir) == 0) { - nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb); - if (!REISERFS_SB(inode->i_sb)->xattr_root->d_inode) - nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb); - } - - return nblocks; -} - -static inline void reiserfs_init_xattr_rwsem(struct inode *inode) -{ - init_rwsem(&REISERFS_I(inode)->i_xattr_sem); -} - -#else - -#define reiserfs_getxattr NULL -#define reiserfs_setxattr NULL -#define reiserfs_listxattr NULL -#define reiserfs_removexattr NULL - -static inline void reiserfs_init_xattr_rwsem(struct inode *inode) -{ -} -#endif /* CONFIG_REISERFS_FS_XATTR */ - -#ifndef CONFIG_REISERFS_FS_SECURITY -static inline int reiserfs_security_init(struct inode *dir, - struct inode *inode, - const struct qstr *qstr, - struct reiserfs_security_handle *sec) -{ - return 0; -} -static inline int -reiserfs_security_write(struct reiserfs_transaction_handle *th, - struct inode *inode, - struct reiserfs_security_handle *sec) -{ - return 0; -} -static inline void reiserfs_security_free(struct reiserfs_security_handle *sec) -{} -#endif - -#endif /* __KERNEL__ */ - #endif /* _LINUX_REISERFS_XATTR_H */ diff --git a/include/linux/relay.h b/include/linux/relay.h index a822fd71fd64..91cacc34c159 100644 --- a/include/linux/relay.h +++ b/include/linux/relay.h @@ -15,6 +15,7 @@ #include <linux/timer.h> #include <linux/wait.h> #include <linux/list.h> +#include <linux/bug.h> #include <linux/fs.h> #include <linux/poll.h> #include <linux/kref.h> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h new file mode 100644 index 000000000000..f1ffabb978d3 --- /dev/null +++ b/include/linux/remoteproc.h @@ -0,0 +1,478 @@ +/* + * Remote Processor Framework + * + * Copyright(c) 2011 Texas Instruments, Inc. + * Copyright(c) 2011 Google, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Texas Instruments nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef REMOTEPROC_H +#define REMOTEPROC_H + +#include <linux/types.h> +#include <linux/kref.h> +#include <linux/klist.h> +#include <linux/mutex.h> +#include <linux/virtio.h> +#include <linux/completion.h> +#include <linux/idr.h> + +/** + * struct resource_table - firmware resource table header + * @ver: version number + * @num: number of resource entries + * @reserved: reserved (must be zero) + * @offset: array of offsets pointing at the various resource entries + * + * A resource table is essentially a list of system resources required + * by the remote processor. It may also include configuration entries. + * If needed, the remote processor firmware should contain this table + * as a dedicated ".resource_table" ELF section. + * + * Some resources entries are mere announcements, where the host is informed + * of specific remoteproc configuration. Other entries require the host to + * do something (e.g. allocate a system resource). Sometimes a negotiation + * is expected, where the firmware requests a resource, and once allocated, + * the host should provide back its details (e.g. address of an allocated + * memory region). + * + * The header of the resource table, as expressed by this structure, + * contains a version number (should we need to change this format in the + * future), the number of available resource entries, and their offsets + * in the table. + * + * Immediately following this header are the resource entries themselves, + * each of which begins with a resource entry header (as described below). + */ +struct resource_table { + u32 ver; + u32 num; + u32 reserved[2]; + u32 offset[0]; +} __packed; + +/** + * struct fw_rsc_hdr - firmware resource entry header + * @type: resource type + * @data: resource data + * + * Every resource entry begins with a 'struct fw_rsc_hdr' header providing + * its @type. The content of the entry itself will immediately follow + * this header, and it should be parsed according to the resource type. + */ +struct fw_rsc_hdr { + u32 type; + u8 data[0]; +} __packed; + +/** + * enum fw_resource_type - types of resource entries + * + * @RSC_CARVEOUT: request for allocation of a physically contiguous + * memory region. + * @RSC_DEVMEM: request to iommu_map a memory-based peripheral. + * @RSC_TRACE: announces the availability of a trace buffer into which + * the remote processor will be writing logs. + * @RSC_VDEV: declare support for a virtio device, and serve as its + * virtio header. + * @RSC_LAST: just keep this one at the end + * + * For more details regarding a specific resource type, please see its + * dedicated structure below. + * + * Please note that these values are used as indices to the rproc_handle_rsc + * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to + * check the validity of an index before the lookup table is accessed, so + * please update it as needed. + */ +enum fw_resource_type { + RSC_CARVEOUT = 0, + RSC_DEVMEM = 1, + RSC_TRACE = 2, + RSC_VDEV = 3, + RSC_LAST = 4, +}; + +#define FW_RSC_ADDR_ANY (0xFFFFFFFFFFFFFFFF) + +/** + * struct fw_rsc_carveout - physically contiguous memory request + * @da: device address + * @pa: physical address + * @len: length (in bytes) + * @flags: iommu protection flags + * @reserved: reserved (must be zero) + * @name: human-readable name of the requested memory region + * + * This resource entry requests the host to allocate a physically contiguous + * memory region. + * + * These request entries should precede other firmware resource entries, + * as other entries might request placing other data objects inside + * these memory regions (e.g. data/code segments, trace resource entries, ...). + * + * Allocating memory this way helps utilizing the reserved physical memory + * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries + * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB + * pressure is important; it may have a substantial impact on performance. + * + * If the firmware is compiled with static addresses, then @da should specify + * the expected device address of this memory region. If @da is set to + * FW_RSC_ADDR_ANY, then the host will dynamically allocate it, and then + * overwrite @da with the dynamically allocated address. + * + * We will always use @da to negotiate the device addresses, even if it + * isn't using an iommu. In that case, though, it will obviously contain + * physical addresses. + * + * Some remote processors needs to know the allocated physical address + * even if they do use an iommu. This is needed, e.g., if they control + * hardware accelerators which access the physical memory directly (this + * is the case with OMAP4 for instance). In that case, the host will + * overwrite @pa with the dynamically allocated physical address. + * Generally we don't want to expose physical addresses if we don't have to + * (remote processors are generally _not_ trusted), so we might want to + * change this to happen _only_ when explicitly required by the hardware. + * + * @flags is used to provide IOMMU protection flags, and @name should + * (optionally) contain a human readable name of this carveout region + * (mainly for debugging purposes). + */ +struct fw_rsc_carveout { + u32 da; + u32 pa; + u32 len; + u32 flags; + u32 reserved; + u8 name[32]; +} __packed; + +/** + * struct fw_rsc_devmem - iommu mapping request + * @da: device address + * @pa: physical address + * @len: length (in bytes) + * @flags: iommu protection flags + * @reserved: reserved (must be zero) + * @name: human-readable name of the requested region to be mapped + * + * This resource entry requests the host to iommu map a physically contiguous + * memory region. This is needed in case the remote processor requires + * access to certain memory-based peripherals; _never_ use it to access + * regular memory. + * + * This is obviously only needed if the remote processor is accessing memory + * via an iommu. + * + * @da should specify the required device address, @pa should specify + * the physical address we want to map, @len should specify the size of + * the mapping and @flags is the IOMMU protection flags. As always, @name may + * (optionally) contain a human readable name of this mapping (mainly for + * debugging purposes). + * + * Note: at this point we just "trust" those devmem entries to contain valid + * physical addresses, but this isn't safe and will be changed: eventually we + * want remoteproc implementations to provide us ranges of physical addresses + * the firmware is allowed to request, and not allow firmwares to request + * access to physical addresses that are outside those ranges. + */ +struct fw_rsc_devmem { + u32 da; + u32 pa; + u32 len; + u32 flags; + u32 reserved; + u8 name[32]; +} __packed; + +/** + * struct fw_rsc_trace - trace buffer declaration + * @da: device address + * @len: length (in bytes) + * @reserved: reserved (must be zero) + * @name: human-readable name of the trace buffer + * + * This resource entry provides the host information about a trace buffer + * into which the remote processor will write log messages. + * + * @da specifies the device address of the buffer, @len specifies + * its size, and @name may contain a human readable name of the trace buffer. + * + * After booting the remote processor, the trace buffers are exposed to the + * user via debugfs entries (called trace0, trace1, etc..). + */ +struct fw_rsc_trace { + u32 da; + u32 len; + u32 reserved; + u8 name[32]; +} __packed; + +/** + * struct fw_rsc_vdev_vring - vring descriptor entry + * @da: device address + * @align: the alignment between the consumer and producer parts of the vring + * @num: num of buffers supported by this vring (must be power of two) + * @notifyid is a unique rproc-wide notify index for this vring. This notify + * index is used when kicking a remote processor, to let it know that this + * vring is triggered. + * @reserved: reserved (must be zero) + * + * This descriptor is not a resource entry by itself; it is part of the + * vdev resource type (see below). + * + * Note that @da should either contain the device address where + * the remote processor is expecting the vring, or indicate that + * dynamically allocation of the vring's device address is supported. + */ +struct fw_rsc_vdev_vring { + u32 da; + u32 align; + u32 num; + u32 notifyid; + u32 reserved; +} __packed; + +/** + * struct fw_rsc_vdev - virtio device header + * @id: virtio device id (as in virtio_ids.h) + * @notifyid is a unique rproc-wide notify index for this vdev. This notify + * index is used when kicking a remote processor, to let it know that the + * status/features of this vdev have changes. + * @dfeatures specifies the virtio device features supported by the firmware + * @gfeatures is a place holder used by the host to write back the + * negotiated features that are supported by both sides. + * @config_len is the size of the virtio config space of this vdev. The config + * space lies in the resource table immediate after this vdev header. + * @status is a place holder where the host will indicate its virtio progress. + * @num_of_vrings indicates how many vrings are described in this vdev header + * @reserved: reserved (must be zero) + * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. + * + * This resource is a virtio device header: it provides information about + * the vdev, and is then used by the host and its peer remote processors + * to negotiate and share certain virtio properties. + * + * By providing this resource entry, the firmware essentially asks remoteproc + * to statically allocate a vdev upon registration of the rproc (dynamic vdev + * allocation is not yet supported). + * + * Note: unlike virtualization systems, the term 'host' here means + * the Linux side which is running remoteproc to control the remote + * processors. We use the name 'gfeatures' to comply with virtio's terms, + * though there isn't really any virtualized guest OS here: it's the host + * which is responsible for negotiating the final features. + * Yeah, it's a bit confusing. + * + * Note: immediately following this structure is the virtio config space for + * this vdev (which is specific to the vdev; for more info, read the virtio + * spec). the size of the config space is specified by @config_len. + */ +struct fw_rsc_vdev { + u32 id; + u32 notifyid; + u32 dfeatures; + u32 gfeatures; + u32 config_len; + u8 status; + u8 num_of_vrings; + u8 reserved[2]; + struct fw_rsc_vdev_vring vring[0]; +} __packed; + +/** + * struct rproc_mem_entry - memory entry descriptor + * @va: virtual address + * @dma: dma address + * @len: length, in bytes + * @da: device address + * @priv: associated data + * @node: list node + */ +struct rproc_mem_entry { + void *va; + dma_addr_t dma; + int len; + u32 da; + void *priv; + struct list_head node; +}; + +struct rproc; + +/** + * struct rproc_ops - platform-specific device handlers + * @start: power on the device and boot it + * @stop: power off the device + * @kick: kick a virtqueue (virtqueue id given as a parameter) + */ +struct rproc_ops { + int (*start)(struct rproc *rproc); + int (*stop)(struct rproc *rproc); + void (*kick)(struct rproc *rproc, int vqid); +}; + +/** + * enum rproc_state - remote processor states + * @RPROC_OFFLINE: device is powered off + * @RPROC_SUSPENDED: device is suspended; needs to be woken up to receive + * a message. + * @RPROC_RUNNING: device is up and running + * @RPROC_CRASHED: device has crashed; need to start recovery + * @RPROC_LAST: just keep this one at the end + * + * Please note that the values of these states are used as indices + * to rproc_state_string, a state-to-name lookup table, + * so please keep the two synchronized. @RPROC_LAST is used to check + * the validity of an index before the lookup table is accessed, so + * please update it as needed too. + */ +enum rproc_state { + RPROC_OFFLINE = 0, + RPROC_SUSPENDED = 1, + RPROC_RUNNING = 2, + RPROC_CRASHED = 3, + RPROC_LAST = 4, +}; + +/** + * struct rproc - represents a physical remote processor device + * @node: klist node of this rproc object + * @domain: iommu domain + * @name: human readable name of the rproc + * @firmware: name of firmware file to be loaded + * @priv: private data which belongs to the platform-specific rproc module + * @ops: platform-specific start/stop rproc handlers + * @dev: underlying device + * @refcount: refcount of users that have a valid pointer to this rproc + * @power: refcount of users who need this rproc powered up + * @state: state of the device + * @lock: lock which protects concurrent manipulations of the rproc + * @dbg_dir: debugfs directory of this rproc device + * @traces: list of trace buffers + * @num_traces: number of trace buffers + * @carveouts: list of physically contiguous memory allocations + * @mappings: list of iommu mappings we initiated, needed on shutdown + * @firmware_loading_complete: marks e/o asynchronous firmware loading + * @bootaddr: address of first instruction to boot rproc with (optional) + * @rvdevs: list of remote virtio devices + * @notifyids: idr for dynamically assigning rproc-wide unique notify ids + */ +struct rproc { + struct klist_node node; + struct iommu_domain *domain; + const char *name; + const char *firmware; + void *priv; + const struct rproc_ops *ops; + struct device *dev; + struct kref refcount; + atomic_t power; + unsigned int state; + struct mutex lock; + struct dentry *dbg_dir; + struct list_head traces; + int num_traces; + struct list_head carveouts; + struct list_head mappings; + struct completion firmware_loading_complete; + u32 bootaddr; + struct list_head rvdevs; + struct idr notifyids; +}; + +/* we currently support only two vrings per rvdev */ +#define RVDEV_NUM_VRINGS 2 + +/** + * struct rproc_vring - remoteproc vring state + * @va: virtual address + * @dma: dma address + * @len: length, in bytes + * @da: device address + * @align: vring alignment + * @notifyid: rproc-specific unique vring index + * @rvdev: remote vdev + * @vq: the virtqueue of this vring + */ +struct rproc_vring { + void *va; + dma_addr_t dma; + int len; + u32 da; + u32 align; + int notifyid; + struct rproc_vdev *rvdev; + struct virtqueue *vq; +}; + +/** + * struct rproc_vdev - remoteproc state for a supported virtio device + * @node: list node + * @rproc: the rproc handle + * @vdev: the virio device + * @vring: the vrings for this vdev + * @dfeatures: virtio device features + * @gfeatures: virtio guest features + */ +struct rproc_vdev { + struct list_head node; + struct rproc *rproc; + struct virtio_device vdev; + struct rproc_vring vring[RVDEV_NUM_VRINGS]; + unsigned long dfeatures; + unsigned long gfeatures; +}; + +struct rproc *rproc_get_by_name(const char *name); +void rproc_put(struct rproc *rproc); + +struct rproc *rproc_alloc(struct device *dev, const char *name, + const struct rproc_ops *ops, + const char *firmware, int len); +void rproc_free(struct rproc *rproc); +int rproc_register(struct rproc *rproc); +int rproc_unregister(struct rproc *rproc); + +int rproc_boot(struct rproc *rproc); +void rproc_shutdown(struct rproc *rproc); + +static inline struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev) +{ + return container_of(vdev, struct rproc_vdev, vdev); +} + +static inline struct rproc *vdev_to_rproc(struct virtio_device *vdev) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + + return rvdev->rproc; +} + +#endif /* REMOTEPROC_H */ diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index c6c608482cba..6fdf02737e9d 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -117,10 +117,10 @@ enum rfkill_user_states { #include <linux/kernel.h> #include <linux/list.h> #include <linux/mutex.h> -#include <linux/device.h> #include <linux/leds.h> #include <linux/err.h> +struct device; /* this is opaque */ struct rfkill; diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index 67be0376d8e3..7be2e88f23fd 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -151,6 +151,9 @@ int ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu); void ring_buffer_record_disable(struct ring_buffer *buffer); void ring_buffer_record_enable(struct ring_buffer *buffer); +void ring_buffer_record_off(struct ring_buffer *buffer); +void ring_buffer_record_on(struct ring_buffer *buffer); +int ring_buffer_record_is_on(struct ring_buffer *buffer); void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu); void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu); diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h index 229b3ca23134..7f07470e1ed9 100644 --- a/include/linux/rio_drv.h +++ b/include/linux/rio_drv.h @@ -17,7 +17,6 @@ #include <linux/ioport.h> #include <linux/list.h> #include <linux/errno.h> -#include <linux/device.h> #include <linux/string.h> #include <linux/rio.h> diff --git a/include/linux/rmap.h b/include/linux/rmap.h index 1cdd62a2788a..fd07c4542cee 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -122,7 +122,6 @@ void unlink_anon_vmas(struct vm_area_struct *); int anon_vma_clone(struct vm_area_struct *, struct vm_area_struct *); void anon_vma_moveto_tail(struct vm_area_struct *); int anon_vma_fork(struct vm_area_struct *, struct vm_area_struct *); -void __anon_vma_link(struct vm_area_struct *); static inline void anon_vma_merge(struct vm_area_struct *vma, struct vm_area_struct *next) diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h new file mode 100644 index 000000000000..a8e50e44203c --- /dev/null +++ b/include/linux/rpmsg.h @@ -0,0 +1,326 @@ +/* + * Remote processor messaging + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Texas Instruments nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _LINUX_RPMSG_H +#define _LINUX_RPMSG_H + +#include <linux/types.h> +#include <linux/device.h> +#include <linux/mod_devicetable.h> + +/* The feature bitmap for virtio rpmsg */ +#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ + +/** + * struct rpmsg_hdr - common header for all rpmsg messages + * @src: source address + * @dst: destination address + * @reserved: reserved for future use + * @len: length of payload (in bytes) + * @flags: message flags + * @data: @len bytes of message payload data + * + * Every message sent(/received) on the rpmsg bus begins with this header. + */ +struct rpmsg_hdr { + u32 src; + u32 dst; + u32 reserved; + u16 len; + u16 flags; + u8 data[0]; +} __packed; + +/** + * struct rpmsg_ns_msg - dynamic name service announcement message + * @name: name of remote service that is published + * @addr: address of remote service that is published + * @flags: indicates whether service is created or destroyed + * + * This message is sent across to publish a new service, or announce + * about its removal. When we receive these messages, an appropriate + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe() + * or ->remove() handler of the appropriate rpmsg driver will be invoked + * (if/as-soon-as one is registered). + */ +struct rpmsg_ns_msg { + char name[RPMSG_NAME_SIZE]; + u32 addr; + u32 flags; +} __packed; + +/** + * enum rpmsg_ns_flags - dynamic name service announcement flags + * + * @RPMSG_NS_CREATE: a new remote service was just created + * @RPMSG_NS_DESTROY: a known remote service was just destroyed + */ +enum rpmsg_ns_flags { + RPMSG_NS_CREATE = 0, + RPMSG_NS_DESTROY = 1, +}; + +#define RPMSG_ADDR_ANY 0xFFFFFFFF + +struct virtproc_info; + +/** + * rpmsg_channel - devices that belong to the rpmsg bus are called channels + * @vrp: the remote processor this channel belongs to + * @dev: the device struct + * @id: device id (used to match between rpmsg drivers and devices) + * @src: local address + * @dst: destination address + * @ept: the rpmsg endpoint of this channel + * @announce: if set, rpmsg will announce the creation/removal of this channel + */ +struct rpmsg_channel { + struct virtproc_info *vrp; + struct device dev; + struct rpmsg_device_id id; + u32 src; + u32 dst; + struct rpmsg_endpoint *ept; + bool announce; +}; + +typedef void (*rpmsg_rx_cb_t)(struct rpmsg_channel *, void *, int, void *, u32); + +/** + * struct rpmsg_endpoint - binds a local rpmsg address to its user + * @rpdev: rpmsg channel device + * @cb: rx callback handler + * @addr: local rpmsg address + * @priv: private data for the driver's use + * + * In essence, an rpmsg endpoint represents a listener on the rpmsg bus, as + * it binds an rpmsg address with an rx callback handler. + * + * Simple rpmsg drivers shouldn't use this struct directly, because + * things just work: every rpmsg driver provides an rx callback upon + * registering to the bus, and that callback is then bound to its rpmsg + * address when the driver is probed. When relevant inbound messages arrive + * (i.e. messages which their dst address equals to the src address of + * the rpmsg channel), the driver's handler is invoked to process it. + * + * More complicated drivers though, that do need to allocate additional rpmsg + * addresses, and bind them to different rx callbacks, must explicitly + * create additional endpoints by themselves (see rpmsg_create_ept()). + */ +struct rpmsg_endpoint { + struct rpmsg_channel *rpdev; + rpmsg_rx_cb_t cb; + u32 addr; + void *priv; +}; + +/** + * struct rpmsg_driver - rpmsg driver struct + * @drv: underlying device driver + * @id_table: rpmsg ids serviced by this driver + * @probe: invoked when a matching rpmsg channel (i.e. device) is found + * @remove: invoked when the rpmsg channel is removed + * @callback: invoked when an inbound message is received on the channel + */ +struct rpmsg_driver { + struct device_driver drv; + const struct rpmsg_device_id *id_table; + int (*probe)(struct rpmsg_channel *dev); + void (*remove)(struct rpmsg_channel *dev); + void (*callback)(struct rpmsg_channel *, void *, int, void *, u32); +}; + +int register_rpmsg_device(struct rpmsg_channel *dev); +void unregister_rpmsg_device(struct rpmsg_channel *dev); +int register_rpmsg_driver(struct rpmsg_driver *drv); +void unregister_rpmsg_driver(struct rpmsg_driver *drv); +void rpmsg_destroy_ept(struct rpmsg_endpoint *); +struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *, + rpmsg_rx_cb_t cb, void *priv, u32 addr); +int +rpmsg_send_offchannel_raw(struct rpmsg_channel *, u32, u32, void *, int, bool); + +/** + * rpmsg_send() - send a message across to the remote processor + * @rpdev: the rpmsg channel + * @data: payload of message + * @len: length of payload + * + * This function sends @data of length @len on the @rpdev channel. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to, using @rpdev's source and destination addresses. + * In case there are no TX buffers available, the function will block until + * one becomes available, or a timeout of 15 seconds elapses. When the latter + * happens, -ERESTARTSYS is returned. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len) +{ + u32 src = rpdev->src, dst = rpdev->dst; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); +} + +/** + * rpmsg_sendto() - send a message across to the remote processor, specify dst + * @rpdev: the rpmsg channel + * @data: payload of message + * @len: length of payload + * @dst: destination address + * + * This function sends @data of length @len to the remote @dst address. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to, using @rpdev's source address. + * In case there are no TX buffers available, the function will block until + * one becomes available, or a timeout of 15 seconds elapses. When the latter + * happens, -ERESTARTSYS is returned. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) +{ + u32 src = rpdev->src; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); +} + +/** + * rpmsg_send_offchannel() - send a message using explicit src/dst addresses + * @rpdev: the rpmsg channel + * @src: source address + * @dst: destination address + * @data: payload of message + * @len: length of payload + * + * This function sends @data of length @len to the remote @dst address, + * and uses @src as the source address. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to. + * In case there are no TX buffers available, the function will block until + * one becomes available, or a timeout of 15 seconds elapses. When the latter + * happens, -ERESTARTSYS is returned. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, + void *data, int len) +{ + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); +} + +/** + * rpmsg_send() - send a message across to the remote processor + * @rpdev: the rpmsg channel + * @data: payload of message + * @len: length of payload + * + * This function sends @data of length @len on the @rpdev channel. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to, using @rpdev's source and destination addresses. + * In case there are no TX buffers available, the function will immediately + * return -ENOMEM without waiting until one becomes available. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len) +{ + u32 src = rpdev->src, dst = rpdev->dst; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); +} + +/** + * rpmsg_sendto() - send a message across to the remote processor, specify dst + * @rpdev: the rpmsg channel + * @data: payload of message + * @len: length of payload + * @dst: destination address + * + * This function sends @data of length @len to the remote @dst address. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to, using @rpdev's source address. + * In case there are no TX buffers available, the function will immediately + * return -ENOMEM without waiting until one becomes available. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) +{ + u32 src = rpdev->src; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); +} + +/** + * rpmsg_send_offchannel() - send a message using explicit src/dst addresses + * @rpdev: the rpmsg channel + * @src: source address + * @dst: destination address + * @data: payload of message + * @len: length of payload + * + * This function sends @data of length @len to the remote @dst address, + * and uses @src as the source address. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to. + * In case there are no TX buffers available, the function will immediately + * return -ENOMEM without waiting until one becomes available. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, + void *data, int len) +{ + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); +} + +#endif /* _LINUX_RPMSG_H */ diff --git a/include/linux/rtc.h b/include/linux/rtc.h index 93f4d035076b..fcabfb4873c8 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -202,7 +202,8 @@ struct rtc_device struct hrtimer pie_timer; /* sub second exp, so needs hrtimer */ int pie_enabled; struct work_struct irqwork; - + /* Some hardware can't support UIE mode */ + int uie_unsupported; #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL struct work_struct uie_task; diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index 63d406554391..54bd7cd7ecbd 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -14,7 +14,6 @@ #include <linux/list.h> #include <linux/spinlock.h> -#include <asm/system.h> #include <linux/atomic.h> struct rw_semaphore; diff --git a/include/linux/sa11x0-dma.h b/include/linux/sa11x0-dma.h new file mode 100644 index 000000000000..65839a58b8e5 --- /dev/null +++ b/include/linux/sa11x0-dma.h @@ -0,0 +1,24 @@ +/* + * SA11x0 DMA Engine support + * + * Copyright (C) 2012 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_SA11X0_DMA_H +#define __LINUX_SA11X0_DMA_H + +struct dma_chan; + +#if defined(CONFIG_DMA_SA11X0) || defined(CONFIG_DMA_SA11X0_MODULE) +bool sa11x0_dma_filter_fn(struct dma_chan *, void *); +#else +static inline bool sa11x0_dma_filter_fn(struct dma_chan *c, void *d) +{ + return false; +} +#endif + +#endif diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 9aaf5bfdad1a..ac9586dadfa5 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -1,10 +1,12 @@ #ifndef _LINUX_SCATTERLIST_H #define _LINUX_SCATTERLIST_H +#include <linux/string.h> +#include <linux/bug.h> +#include <linux/mm.h> + #include <asm/types.h> #include <asm/scatterlist.h> -#include <linux/mm.h> -#include <linux/string.h> #include <asm/io.h> struct sg_table { diff --git a/include/linux/sched.h b/include/linux/sched.h index e074e1e54f85..81a173c0897d 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -63,7 +63,6 @@ struct sched_param { #include <linux/nodemask.h> #include <linux/mm_types.h> -#include <asm/system.h> #include <asm/page.h> #include <asm/ptrace.h> #include <asm/cputime.h> @@ -553,6 +552,18 @@ struct signal_struct { int group_stop_count; unsigned int flags; /* see SIGNAL_* flags below */ + /* + * PR_SET_CHILD_SUBREAPER marks a process, like a service + * manager, to re-parent orphan (double-forking) child processes + * to this process instead of 'init'. The service manager is + * able to receive SIGCHLD signals and is able to investigate + * the process until it calls wait(). All children of this + * process will inherit a flag if they should look for a + * child_subreaper process at exit. + */ + unsigned int is_child_subreaper:1; + unsigned int has_child_subreaper:1; + /* POSIX.1b Interval Timers */ struct list_head posix_timers; @@ -1514,7 +1525,7 @@ struct task_struct { #endif #ifdef CONFIG_CPUSETS nodemask_t mems_allowed; /* Protected by alloc_lock */ - int mems_allowed_change_disable; + seqcount_t mems_allowed_seq; /* Seqence no to catch updates */ int cpuset_mem_spread_rotor; int cpuset_slab_spread_rotor; #endif diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h index 44f1514b00ba..fc61854f6224 100644 --- a/include/linux/seq_file.h +++ b/include/linux/seq_file.h @@ -3,6 +3,7 @@ #include <linux/types.h> #include <linux/string.h> +#include <linux/bug.h> #include <linux/mutex.h> #include <linux/cpumask.h> #include <linux/nodemask.h> @@ -121,9 +122,12 @@ int single_release(struct inode *, struct file *); void *__seq_open_private(struct file *, const struct seq_operations *, int); int seq_open_private(struct file *, const struct seq_operations *, int); int seq_release_private(struct inode *, struct file *); +int seq_put_decimal_ull(struct seq_file *m, char delimiter, + unsigned long long num); +int seq_put_decimal_ll(struct seq_file *m, char delimiter, + long long num); #define SEQ_START_TOKEN ((void *)1) - /* * Helpers for iteration over list_head-s in seq_files */ diff --git a/include/linux/serial_pnx8xxx.h b/include/linux/serial_pnx8xxx.h index de6c19c7f340..79ad87b0be3e 100644 --- a/include/linux/serial_pnx8xxx.h +++ b/include/linux/serial_pnx8xxx.h @@ -20,7 +20,6 @@ #define _LINUX_SERIAL_PNX8XXX_H #include <linux/serial_core.h> -#include <linux/device.h> #define PNX8XXX_NR_PORTS 2 diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 54341d811685..0a9d8f2ac519 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -18,7 +18,8 @@ struct clk_mapping { struct kref ref; }; -struct clk_ops { + +struct sh_clk_ops { #ifdef CONFIG_SH_CLK_CPG_LEGACY void (*init)(struct clk *clk); #endif @@ -37,7 +38,7 @@ struct clk { unsigned short parent_num; /* choose between */ unsigned char src_shift; /* source clock field in the */ unsigned char src_width; /* configuration register */ - struct clk_ops *ops; + struct sh_clk_ops *ops; struct list_head children; struct list_head sibling; /* node for children */ diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index b160645f5599..6aed0805927f 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -3,6 +3,23 @@ #include <linux/ioport.h> +#ifdef CONFIG_SUPERH +#define INTC_NR_IRQS 512 +#else +#define INTC_NR_IRQS 1024 +#endif + +/* + * Convert back and forth between INTEVT and IRQ values. + */ +#ifdef CONFIG_CPU_HAS_INTEVT +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) +#else +#define evt2irq(evt) (evt) +#define irq2evt(irq) (irq) +#endif + typedef unsigned char intc_enum; struct intc_vect { diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index a2b9953b582d..33370271b8b2 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -18,6 +18,7 @@ #include <linux/kmemcheck.h> #include <linux/compiler.h> #include <linux/time.h> +#include <linux/bug.h> #include <linux/cache.h> #include <linux/atomic.h> @@ -500,7 +501,6 @@ struct sk_buff { */ #include <linux/slab.h> -#include <asm/system.h> /* * skb might have a dst pointer attached, refcounted or not. @@ -1244,7 +1244,7 @@ static inline void skb_fill_page_desc(struct sk_buff *skb, int i, } extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, - int off, int size); + int off, int size, unsigned int truesize); #define SKB_PAGE_ASSERT(skb) BUG_ON(skb_shinfo(skb)->nr_frags) #define SKB_FRAG_ASSERT(skb) BUG_ON(skb_has_frag_list(skb)) diff --git a/include/linux/slab.h b/include/linux/slab.h index 573c809c33d9..a595dce6b0c7 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -190,7 +190,7 @@ size_t ksize(const void *); #endif /** - * kcalloc - allocate memory for an array. The memory is set to zero. + * kmalloc_array - allocate memory for an array. * @n: number of elements. * @size: element size. * @flags: the type of memory to allocate. @@ -240,11 +240,22 @@ size_t ksize(const void *); * for general use, and so are not documented here. For a full list of * potential flags, always refer to linux/gfp.h. */ -static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +static inline void *kmalloc_array(size_t n, size_t size, gfp_t flags) { if (size != 0 && n > ULONG_MAX / size) return NULL; - return __kmalloc(n * size, flags | __GFP_ZERO); + return __kmalloc(n * size, flags); +} + +/** + * kcalloc - allocate memory for an array. The memory is set to zero. + * @n: number of elements. + * @size: element size. + * @flags: the type of memory to allocate (see kmalloc). + */ +static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +{ + return kmalloc_array(n, size, flags | __GFP_ZERO); } #if !defined(CONFIG_NUMA) && !defined(CONFIG_SLOB) diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index a32bcfdc7834..c2f8c8bc56ed 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -8,6 +8,7 @@ */ #include <linux/types.h> #include <linux/gfp.h> +#include <linux/bug.h> #include <linux/workqueue.h> #include <linux/kobject.h> @@ -21,7 +22,7 @@ enum stat_item { FREE_FROZEN, /* Freeing to frozen slab */ FREE_ADD_PARTIAL, /* Freeing moves slab to partial list */ FREE_REMOVE_PARTIAL, /* Freeing removes last object */ - ALLOC_FROM_PARTIAL, /* Cpu slab acquired from partial list */ + ALLOC_FROM_PARTIAL, /* Cpu slab acquired from node partial list */ ALLOC_SLAB, /* Cpu slab acquired from page allocator */ ALLOC_REFILL, /* Refill cpu slab from slab freelist */ ALLOC_NODE_MISMATCH, /* Switching cpu slab */ @@ -37,7 +38,9 @@ enum stat_item { CMPXCHG_DOUBLE_CPU_FAIL,/* Failure of this_cpu_cmpxchg_double */ CMPXCHG_DOUBLE_FAIL, /* Number of times that cmpxchg double did not match */ CPU_PARTIAL_ALLOC, /* Used cpu partial on alloc */ - CPU_PARTIAL_FREE, /* USed cpu partial on free */ + CPU_PARTIAL_FREE, /* Refill cpu partial on free */ + CPU_PARTIAL_NODE, /* Refill cpu partial from node partial */ + CPU_PARTIAL_DRAIN, /* Drain cpu partial to node partial */ NR_SLUB_STAT_ITEMS }; struct kmem_cache_cpu { diff --git a/include/linux/smp.h b/include/linux/smp.h index 8cc38d3bab0c..10530d92c04b 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -102,6 +102,22 @@ static inline void call_function_init(void) { } int on_each_cpu(smp_call_func_t func, void *info, int wait); /* + * Call a function on processors specified by mask, which might include + * the local one. + */ +void on_each_cpu_mask(const struct cpumask *mask, smp_call_func_t func, + void *info, bool wait); + +/* + * Call a function on each processor for which the supplied function + * cond_func returns a positive value. This may include the local + * processor. + */ +void on_each_cpu_cond(bool (*cond_func)(int cpu, void *info), + smp_call_func_t func, void *info, bool wait, + gfp_t gfp_flags); + +/* * Mark the boot cpu "online" so that it can call console drivers in * printk() and can access its per-cpu storage. */ @@ -132,6 +148,36 @@ static inline int up_smp_call_function(smp_call_func_t func, void *info) local_irq_enable(); \ 0; \ }) +/* + * Note we still need to test the mask even for UP + * because we actually can get an empty mask from + * code that on SMP might call us without the local + * CPU in the mask. + */ +#define on_each_cpu_mask(mask, func, info, wait) \ + do { \ + if (cpumask_test_cpu(0, (mask))) { \ + local_irq_disable(); \ + (func)(info); \ + local_irq_enable(); \ + } \ + } while (0) +/* + * Preemption is disabled here to make sure the cond_func is called under the + * same condtions in UP and SMP. + */ +#define on_each_cpu_cond(cond_func, func, info, wait, gfp_flags)\ + do { \ + void *__info = (info); \ + preempt_disable(); \ + if ((cond_func)(0, __info)) { \ + local_irq_disable(); \ + (func)(__info); \ + local_irq_enable(); \ + } \ + preempt_enable(); \ + } while (0) + static inline void smp_send_reschedule(int cpu) { } #define num_booting_cpus() 1 #define smp_prepare_boot_cpu() do {} while (0) diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h index 0f4eb165f254..32be8dbdf191 100644 --- a/include/linux/spi/mmc_spi.h +++ b/include/linux/spi/mmc_spi.h @@ -1,10 +1,10 @@ #ifndef __LINUX_SPI_MMC_SPI_H #define __LINUX_SPI_MMC_SPI_H -#include <linux/device.h> #include <linux/spi/spi.h> #include <linux/interrupt.h> +struct device; struct mmc_host; /* Put this in platform_data of a device being used to manage an MMC/SD diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h index decf6d8c77b7..b4d9fa6f797c 100644 --- a/include/linux/spi/orion_spi.h +++ b/include/linux/spi/orion_spi.h @@ -11,7 +11,6 @@ struct orion_spi_info { u32 tclk; /* no <linux/clk.h> support yet */ - u32 enable_clock_fix; }; diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h new file mode 100644 index 000000000000..c23b923e493b --- /dev/null +++ b/include/linux/spi/s3c24xx.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - SPI Controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_SPI_S3C24XX_H +#define __LINUX_SPI_S3C24XX_H __FILE__ + +struct s3c2410_spi_info { + int pin_cs; /* simple gpio cs */ + unsigned int num_cs; /* total chipselects */ + int bus_num; /* bus number to use. */ + + unsigned int use_fiq:1; /* use fiq */ + + void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); + void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); +}; + +#endif /* __LINUX_SPI_S3C24XX_H */ diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 7df6c17b0281..7d537ced949a 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -55,8 +55,8 @@ #include <linux/kernel.h> #include <linux/stringify.h> #include <linux/bottom_half.h> +#include <asm/barrier.h> -#include <asm/system.h> /* * Must define these before including other files, inline functions need them @@ -375,10 +375,7 @@ static inline int spin_can_lock(spinlock_t *lock) return raw_spin_can_lock(&lock->rlock); } -static inline void assert_spin_locked(spinlock_t *lock) -{ - assert_raw_spin_locked(&lock->rlock); -} +#define assert_spin_locked(lock) assert_raw_spin_locked(&(lock)->rlock) /* * Pull the atomic_t declaration: diff --git a/include/linux/spinlock_api_smp.h b/include/linux/spinlock_api_smp.h index e253ccd7a604..51df117abe46 100644 --- a/include/linux/spinlock_api_smp.h +++ b/include/linux/spinlock_api_smp.h @@ -67,7 +67,7 @@ _raw_spin_unlock_irqrestore(raw_spinlock_t *lock, unsigned long flags) #define _raw_spin_trylock_bh(lock) __raw_spin_trylock_bh(lock) #endif -#ifdef CONFIG_INLINE_SPIN_UNLOCK +#ifndef CONFIG_UNINLINE_SPIN_UNLOCK #define _raw_spin_unlock(lock) __raw_spin_unlock(lock) #endif diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h index eba52a100533..6b05dcd927ff 100644 --- a/include/linux/ssb/ssb_driver_gige.h +++ b/include/linux/ssb/ssb_driver_gige.h @@ -2,6 +2,7 @@ #define LINUX_SSB_DRIVER_GIGE_H_ #include <linux/ssb/ssb.h> +#include <linux/bug.h> #include <linux/pci.h> #include <linux/spinlock.h> diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h index c170edc3bf5f..3b5e910d14ca 100644 --- a/include/linux/stop_machine.h +++ b/include/linux/stop_machine.h @@ -5,7 +5,6 @@ #include <linux/cpumask.h> #include <linux/smp.h> #include <linux/list.h> -#include <asm/system.h> /* * stop_cpu[s]() is simplistic per-cpu maximum priority cpu diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h index 7874a8a56638..492a36d72829 100644 --- a/include/linux/sunrpc/auth.h +++ b/include/linux/sunrpc/auth.h @@ -99,6 +99,8 @@ struct rpc_authops { struct rpc_cred * (*lookup_cred)(struct rpc_auth *, struct auth_cred *, int); struct rpc_cred * (*crcreate)(struct rpc_auth*, struct auth_cred *, int); + int (*pipes_create)(struct rpc_auth *); + void (*pipes_destroy)(struct rpc_auth *); }; struct rpc_credops { diff --git a/include/linux/sunrpc/bc_xprt.h b/include/linux/sunrpc/bc_xprt.h index f7f3ce340c08..969c0a671dbf 100644 --- a/include/linux/sunrpc/bc_xprt.h +++ b/include/linux/sunrpc/bc_xprt.h @@ -35,7 +35,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. struct rpc_rqst *xprt_alloc_bc_request(struct rpc_xprt *xprt); void xprt_free_bc_request(struct rpc_rqst *req); int xprt_setup_backchannel(struct rpc_xprt *, unsigned int min_reqs); -void xprt_destroy_backchannel(struct rpc_xprt *, int max_reqs); +void xprt_destroy_backchannel(struct rpc_xprt *, unsigned int max_reqs); int bc_send(struct rpc_rqst *req); /* diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 57531f8e5956..f5fd6160dbca 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -117,6 +117,7 @@ struct cache_detail { struct cache_detail_procfs procfs; struct cache_detail_pipefs pipefs; } u; + struct net *net; }; @@ -197,11 +198,14 @@ extern void cache_flush(void); extern void cache_purge(struct cache_detail *detail); #define NEVER (0x7FFFFFFF) extern void __init cache_initialize(void); -extern int cache_register(struct cache_detail *cd); extern int cache_register_net(struct cache_detail *cd, struct net *net); -extern void cache_unregister(struct cache_detail *cd); extern void cache_unregister_net(struct cache_detail *cd, struct net *net); +extern struct cache_detail *cache_create_net(struct cache_detail *tmpl, struct net *net); +extern void cache_destroy_net(struct cache_detail *cd, struct net *net); + +extern void sunrpc_init_cache_detail(struct cache_detail *cd); +extern void sunrpc_destroy_cache_detail(struct cache_detail *cd); extern int sunrpc_cache_register_pipefs(struct dentry *parent, const char *, umode_t, struct cache_detail *); extern void sunrpc_cache_unregister_pipefs(struct cache_detail *); diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 2c5993a17c33..523547ecfee2 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -35,14 +35,13 @@ struct rpc_clnt { struct list_head cl_clients; /* Global list of clients */ struct list_head cl_tasks; /* List of tasks */ spinlock_t cl_lock; /* spinlock */ - struct rpc_xprt * cl_xprt; /* transport */ + struct rpc_xprt __rcu * cl_xprt; /* transport */ struct rpc_procinfo * cl_procinfo; /* procedure info */ u32 cl_prog, /* RPC program number */ cl_vers, /* RPC version number */ cl_maxproc; /* max procedure number */ - char * cl_server; /* server machine name */ - char * cl_protname; /* protocol name */ + const char * cl_protname; /* protocol name */ struct rpc_auth * cl_auth; /* authenticator */ struct rpc_stat * cl_stats; /* per-program statistics */ struct rpc_iostats * cl_metrics; /* per-client statistics */ @@ -57,12 +56,11 @@ struct rpc_clnt { int cl_nodelen; /* nodename length */ char cl_nodename[UNX_MAXNODENAME]; - struct path cl_path; + struct dentry * cl_dentry; struct rpc_clnt * cl_parent; /* Points to parent of clones */ struct rpc_rtt cl_rtt_default; struct rpc_timeout cl_timeout_default; - struct rpc_program * cl_program; - char cl_inline_name[32]; + const struct rpc_program *cl_program; char *cl_principal; /* target to authenticate to */ }; @@ -71,12 +69,12 @@ struct rpc_clnt { */ #define RPC_MAXVERSION 4 struct rpc_program { - char * name; /* protocol name */ + const char * name; /* protocol name */ u32 number; /* program number */ unsigned int nrvers; /* number of versions */ - struct rpc_version ** version; /* version array */ + const struct rpc_version ** version; /* version array */ struct rpc_stat * stats; /* statistics */ - char * pipe_dir_name; /* path to rpc_pipefs dir */ + const char * pipe_dir_name; /* path to rpc_pipefs dir */ }; struct rpc_version { @@ -97,7 +95,7 @@ struct rpc_procinfo { unsigned int p_count; /* call count */ unsigned int p_timer; /* Which RTT timer to use */ u32 p_statidx; /* Which procedure to account */ - char * p_name; /* name of procedure */ + const char * p_name; /* name of procedure */ }; #ifdef __KERNEL__ @@ -109,8 +107,8 @@ struct rpc_create_args { size_t addrsize; struct sockaddr *saddress; const struct rpc_timeout *timeout; - char *servername; - struct rpc_program *program; + const char *servername; + const struct rpc_program *program; u32 prognumber; /* overrides program->number */ u32 version; rpc_authflavor_t authflavor; @@ -129,17 +127,18 @@ struct rpc_create_args { struct rpc_clnt *rpc_create(struct rpc_create_args *args); struct rpc_clnt *rpc_bind_new_program(struct rpc_clnt *, - struct rpc_program *, u32); + const struct rpc_program *, u32); void rpc_task_reset_client(struct rpc_task *task, struct rpc_clnt *clnt); struct rpc_clnt *rpc_clone_client(struct rpc_clnt *); void rpc_shutdown_client(struct rpc_clnt *); void rpc_release_client(struct rpc_clnt *); void rpc_task_release_client(struct rpc_task *); -int rpcb_create_local(void); -void rpcb_put_local(void); -int rpcb_register(u32, u32, int, unsigned short); -int rpcb_v4_register(const u32 program, const u32 version, +int rpcb_create_local(struct net *); +void rpcb_put_local(struct net *); +int rpcb_register(struct net *, u32, u32, int, unsigned short); +int rpcb_v4_register(struct net *net, const u32 program, + const u32 version, const struct sockaddr *address, const char *netid); void rpcb_getport_async(struct rpc_task *); @@ -156,16 +155,19 @@ struct rpc_task *rpc_call_null(struct rpc_clnt *clnt, struct rpc_cred *cred, int rpc_restart_call_prepare(struct rpc_task *); int rpc_restart_call(struct rpc_task *); void rpc_setbufsize(struct rpc_clnt *, unsigned int, unsigned int); +int rpc_protocol(struct rpc_clnt *); +struct net * rpc_net_ns(struct rpc_clnt *); size_t rpc_max_payload(struct rpc_clnt *); void rpc_force_rebind(struct rpc_clnt *); size_t rpc_peeraddr(struct rpc_clnt *, struct sockaddr *, size_t); const char *rpc_peeraddr2str(struct rpc_clnt *, enum rpc_display_format_t); +int rpc_localaddr(struct rpc_clnt *, struct sockaddr *, size_t); size_t rpc_ntop(const struct sockaddr *, char *, const size_t); -size_t rpc_pton(const char *, const size_t, +size_t rpc_pton(struct net *, const char *, const size_t, struct sockaddr *, const size_t); char * rpc_sockaddr2uaddr(const struct sockaddr *, gfp_t); -size_t rpc_uaddr2sockaddr(const char *, const size_t, +size_t rpc_uaddr2sockaddr(struct net *, const char *, const size_t, struct sockaddr *, const size_t); static inline unsigned short rpc_get_port(const struct sockaddr *sap) diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h index c2786f20016f..a76cc20d98ce 100644 --- a/include/linux/sunrpc/debug.h +++ b/include/linux/sunrpc/debug.h @@ -31,9 +31,12 @@ /* * Enable RPC debugging/profiling. */ -#ifdef CONFIG_SYSCTL +#ifdef CONFIG_SUNRPC_DEBUG #define RPC_DEBUG #endif +#ifdef CONFIG_TRACEPOINTS +#define RPC_TRACEPOINTS +#endif /* #define RPC_PROFILE */ /* @@ -47,15 +50,32 @@ extern unsigned int nlm_debug; #endif #define dprintk(args...) dfprintk(FACILITY, ## args) +#define dprintk_rcu(args...) dfprintk_rcu(FACILITY, ## args) #undef ifdebug #ifdef RPC_DEBUG # define ifdebug(fac) if (unlikely(rpc_debug & RPCDBG_##fac)) -# define dfprintk(fac, args...) do { ifdebug(fac) printk(args); } while(0) + +# define dfprintk(fac, args...) \ + do { \ + ifdebug(fac) \ + printk(KERN_DEFAULT args); \ + } while (0) + +# define dfprintk_rcu(fac, args...) \ + do { \ + ifdebug(fac) { \ + rcu_read_lock(); \ + printk(KERN_DEFAULT args); \ + rcu_read_unlock(); \ + } \ + } while (0) + # define RPC_IFDEBUG(x) x #else # define ifdebug(fac) if (0) -# define dfprintk(fac, args...) do ; while (0) +# define dfprintk(fac, args...) do {} while (0) +# define dfprintk_rcu(fac, args...) do {} while (0) # define RPC_IFDEBUG(x) #endif diff --git a/include/linux/sunrpc/metrics.h b/include/linux/sunrpc/metrics.h index b6edbc0ea83d..1565bbe86d51 100644 --- a/include/linux/sunrpc/metrics.h +++ b/include/linux/sunrpc/metrics.h @@ -74,14 +74,16 @@ struct rpc_clnt; #ifdef CONFIG_PROC_FS struct rpc_iostats * rpc_alloc_iostats(struct rpc_clnt *); -void rpc_count_iostats(struct rpc_task *); +void rpc_count_iostats(const struct rpc_task *, + struct rpc_iostats *); void rpc_print_iostats(struct seq_file *, struct rpc_clnt *); void rpc_free_iostats(struct rpc_iostats *); #else /* CONFIG_PROC_FS */ static inline struct rpc_iostats *rpc_alloc_iostats(struct rpc_clnt *clnt) { return NULL; } -static inline void rpc_count_iostats(struct rpc_task *task) {} +static inline void rpc_count_iostats(const struct rpc_task *task, + struct rpc_iostats *stats) {} static inline void rpc_print_iostats(struct seq_file *seq, struct rpc_clnt *clnt) {} static inline void rpc_free_iostats(struct rpc_iostats *stats) {} diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 2bb03d77375a..a7b422b33eda 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -21,21 +21,26 @@ struct rpc_pipe_ops { void (*destroy_msg)(struct rpc_pipe_msg *); }; -struct rpc_inode { - struct inode vfs_inode; - void *private; +struct rpc_pipe { struct list_head pipe; struct list_head in_upcall; struct list_head in_downcall; int pipelen; int nreaders; int nwriters; - int nkern_readwriters; - wait_queue_head_t waitq; #define RPC_PIPE_WAIT_FOR_OPEN 1 int flags; struct delayed_work queue_timeout; const struct rpc_pipe_ops *ops; + spinlock_t lock; + struct dentry *dentry; +}; + +struct rpc_inode { + struct inode vfs_inode; + void *private; + struct rpc_pipe *pipe; + wait_queue_head_t waitq; }; static inline struct rpc_inode * @@ -44,9 +49,28 @@ RPC_I(struct inode *inode) return container_of(inode, struct rpc_inode, vfs_inode); } +enum { + SUNRPC_PIPEFS_NFS_PRIO, + SUNRPC_PIPEFS_RPC_PRIO, +}; + +extern int rpc_pipefs_notifier_register(struct notifier_block *); +extern void rpc_pipefs_notifier_unregister(struct notifier_block *); + +enum { + RPC_PIPEFS_MOUNT, + RPC_PIPEFS_UMOUNT, +}; + +extern struct dentry *rpc_d_lookup_sb(const struct super_block *sb, + const unsigned char *dir_name); +extern void rpc_pipefs_init_net(struct net *net); +extern struct super_block *rpc_get_sb_net(const struct net *net); +extern void rpc_put_sb_net(const struct net *net); + extern ssize_t rpc_pipe_generic_upcall(struct file *, struct rpc_pipe_msg *, char __user *, size_t); -extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); +extern int rpc_queue_upcall(struct rpc_pipe *, struct rpc_pipe_msg *); struct rpc_clnt; extern struct dentry *rpc_create_client_dir(struct dentry *, struct qstr *, struct rpc_clnt *); @@ -59,11 +83,13 @@ extern struct dentry *rpc_create_cache_dir(struct dentry *, struct cache_detail *); extern void rpc_remove_cache_dir(struct dentry *); -extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, - const struct rpc_pipe_ops *, int flags); +extern int rpc_rmdir(struct dentry *dentry); + +struct rpc_pipe *rpc_mkpipe_data(const struct rpc_pipe_ops *ops, int flags); +void rpc_destroy_pipe_data(struct rpc_pipe *pipe); +extern struct dentry *rpc_mkpipe_dentry(struct dentry *, const char *, void *, + struct rpc_pipe *); extern int rpc_unlink(struct dentry *); -extern struct vfsmount *rpc_get_mount(void); -extern void rpc_put_mount(void); extern int register_rpc_pipefs(void); extern void unregister_rpc_pipefs(void); diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index e7756896f3ca..dc0c3cc3ada3 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -103,6 +103,7 @@ typedef void (*rpc_action)(struct rpc_task *); struct rpc_call_ops { void (*rpc_call_prepare)(struct rpc_task *, void *); void (*rpc_call_done)(struct rpc_task *, void *); + void (*rpc_count_stats)(struct rpc_task *, void *); void (*rpc_release)(void *); }; @@ -195,7 +196,7 @@ struct rpc_wait_queue { unsigned char nr; /* # tasks remaining for cookie */ unsigned short qlen; /* total # tasks waiting in queue */ struct rpc_timer timer_list; -#ifdef RPC_DEBUG +#if defined(RPC_DEBUG) || defined(RPC_TRACEPOINTS) const char * name; #endif }; @@ -235,6 +236,9 @@ void rpc_wake_up_queued_task(struct rpc_wait_queue *, struct rpc_task *); void rpc_wake_up(struct rpc_wait_queue *); struct rpc_task *rpc_wake_up_next(struct rpc_wait_queue *); +struct rpc_task *rpc_wake_up_first(struct rpc_wait_queue *, + bool (*)(struct rpc_task *, void *), + void *); void rpc_wake_up_status(struct rpc_wait_queue *, int); int rpc_queue_empty(struct rpc_wait_queue *); void rpc_delay(struct rpc_task *, unsigned long); @@ -244,7 +248,8 @@ int rpciod_up(void); void rpciod_down(void); int __rpc_wait_for_completion_task(struct rpc_task *task, int (*)(void *)); #ifdef RPC_DEBUG -void rpc_show_tasks(void); +struct net; +void rpc_show_tasks(struct net *); #endif int rpc_init_mempool(void); void rpc_destroy_mempool(void); @@ -266,11 +271,22 @@ static inline int rpc_task_has_priority(struct rpc_task *task, unsigned char pri return (task->tk_priority + RPC_PRIORITY_LOW == prio); } -#ifdef RPC_DEBUG -static inline const char * rpc_qname(struct rpc_wait_queue *q) +#if defined(RPC_DEBUG) || defined (RPC_TRACEPOINTS) +static inline const char * rpc_qname(const struct rpc_wait_queue *q) { return ((q && q->name) ? q->name : "unknown"); } + +static inline void rpc_assign_waitqueue_name(struct rpc_wait_queue *q, + const char *name) +{ + q->name = name; +} +#else +static inline void rpc_assign_waitqueue_name(struct rpc_wait_queue *q, + const char *name) +{ +} #endif #endif /* _LINUX_SUNRPC_SCHED_H_ */ diff --git a/include/linux/sunrpc/stats.h b/include/linux/sunrpc/stats.h index 680471d1f28a..edc64219f92b 100644 --- a/include/linux/sunrpc/stats.h +++ b/include/linux/sunrpc/stats.h @@ -12,7 +12,7 @@ #include <linux/proc_fs.h> struct rpc_stat { - struct rpc_program * program; + const struct rpc_program *program; unsigned int netcnt, netudpcnt, @@ -58,24 +58,24 @@ void rpc_modcount(struct inode *, int); #endif #ifdef CONFIG_PROC_FS -struct proc_dir_entry * rpc_proc_register(struct rpc_stat *); -void rpc_proc_unregister(const char *); -void rpc_proc_zero(struct rpc_program *); -struct proc_dir_entry * svc_proc_register(struct svc_stat *, +struct proc_dir_entry * rpc_proc_register(struct net *,struct rpc_stat *); +void rpc_proc_unregister(struct net *,const char *); +void rpc_proc_zero(const struct rpc_program *); +struct proc_dir_entry * svc_proc_register(struct net *, struct svc_stat *, const struct file_operations *); -void svc_proc_unregister(const char *); +void svc_proc_unregister(struct net *, const char *); void svc_seq_show(struct seq_file *, const struct svc_stat *); #else -static inline struct proc_dir_entry *rpc_proc_register(struct rpc_stat *s) { return NULL; } -static inline void rpc_proc_unregister(const char *p) {} -static inline void rpc_proc_zero(struct rpc_program *p) {} +static inline struct proc_dir_entry *rpc_proc_register(struct net *net, struct rpc_stat *s) { return NULL; } +static inline void rpc_proc_unregister(struct net *net, const char *p) {} +static inline void rpc_proc_zero(const struct rpc_program *p) {} -static inline struct proc_dir_entry *svc_proc_register(struct svc_stat *s, +static inline struct proc_dir_entry *svc_proc_register(struct net *net, struct svc_stat *s, const struct file_operations *f) { return NULL; } -static inline void svc_proc_unregister(const char *p) {} +static inline void svc_proc_unregister(struct net *net, const char *p) {} static inline void svc_seq_show(struct seq_file *seq, const struct svc_stat *st) {} diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 35b37b1e9299..51b29ac45a8e 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -84,7 +84,8 @@ struct svc_serv { unsigned int sv_nrpools; /* number of thread pools */ struct svc_pool * sv_pools; /* array of thread pools */ - void (*sv_shutdown)(struct svc_serv *serv); + void (*sv_shutdown)(struct svc_serv *serv, + struct net *net); /* Callback to use when last thread * exits. */ @@ -413,22 +414,24 @@ struct svc_procedure { /* * Function prototypes. */ -void svc_rpcb_cleanup(struct svc_serv *serv); +int svc_rpcb_setup(struct svc_serv *serv, struct net *net); +void svc_rpcb_cleanup(struct svc_serv *serv, struct net *net); struct svc_serv *svc_create(struct svc_program *, unsigned int, - void (*shutdown)(struct svc_serv *)); + void (*shutdown)(struct svc_serv *, struct net *net)); struct svc_rqst *svc_prepare_thread(struct svc_serv *serv, struct svc_pool *pool, int node); void svc_exit_thread(struct svc_rqst *); struct svc_serv * svc_create_pooled(struct svc_program *, unsigned int, - void (*shutdown)(struct svc_serv *), + void (*shutdown)(struct svc_serv *, struct net *net), svc_thread_fn, struct module *); int svc_set_num_threads(struct svc_serv *, struct svc_pool *, int); int svc_pool_stats_open(struct svc_serv *serv, struct file *file); void svc_destroy(struct svc_serv *); +void svc_shutdown_net(struct svc_serv *, struct net *); int svc_process(struct svc_rqst *); int bc_svc_process(struct svc_serv *, struct rpc_rqst *, struct svc_rqst *); -int svc_register(const struct svc_serv *, const int, +int svc_register(const struct svc_serv *, struct net *, const int, const unsigned short, const unsigned short); void svc_wake_up(struct svc_serv *); diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index c14fe86dac59..0b8e3e6bdacf 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -190,7 +190,7 @@ extern int svc_rdma_xdr_encode_error(struct svcxprt_rdma *, extern void svc_rdma_xdr_encode_write_list(struct rpcrdma_msg *, int); extern void svc_rdma_xdr_encode_reply_array(struct rpcrdma_write_array *, int); extern void svc_rdma_xdr_encode_array_chunk(struct rpcrdma_write_array *, int, - u32, u64, u32); + __be32, __be64, u32); extern void svc_rdma_xdr_encode_reply_header(struct svcxprt_rdma *, struct rpcrdma_msg *, struct rpcrdma_msg *, @@ -292,7 +292,7 @@ svc_rdma_get_reply_array(struct rpcrdma_msg *rmsgp) if (wr_ary) { rp_ary = (struct rpcrdma_write_array *) &wr_ary-> - wc_array[wr_ary->wc_nchunks].wc_target.rs_length; + wc_array[ntohl(wr_ary->wc_nchunks)].wc_target.rs_length; goto found_it; } diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index dfa900948af7..b3f64b12f141 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -121,7 +121,8 @@ void svc_close_xprt(struct svc_xprt *xprt); int svc_port_is_privileged(struct sockaddr *sin); int svc_print_xprts(char *buf, int maxlen); struct svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name, - const sa_family_t af, const unsigned short port); + struct net *net, const sa_family_t af, + const unsigned short port); int svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen); static inline void svc_xprt_get(struct svc_xprt *xprt) diff --git a/include/linux/sunrpc/svcauth.h b/include/linux/sunrpc/svcauth.h index 25d333c1b571..548790e9113b 100644 --- a/include/linux/sunrpc/svcauth.h +++ b/include/linux/sunrpc/svcauth.h @@ -135,6 +135,9 @@ extern void svcauth_unix_purge(void); extern void svcauth_unix_info_release(struct svc_xprt *xpt); extern int svcauth_unix_set_client(struct svc_rqst *rqstp); +extern int unix_gid_cache_create(struct net *net); +extern void unix_gid_cache_destroy(struct net *net); + static inline unsigned long hash_str(char *name, int bits) { unsigned long hash = 0; diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h index 83bbee3f089c..7c32daa025eb 100644 --- a/include/linux/sunrpc/svcauth_gss.h +++ b/include/linux/sunrpc/svcauth_gss.h @@ -18,6 +18,8 @@ int gss_svc_init(void); void gss_svc_shutdown(void); +int gss_svc_init_net(struct net *net); +void gss_svc_shutdown_net(struct net *net); int svcauth_gss_register_pseudoflavor(u32 pseudoflavor, char * name); u32 svcauth_gss_flavor(struct auth_domain *dom); char *svc_gss_principal(struct svc_rqst *); diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h index c84e9741cb2a..cb4ac69e1f33 100644 --- a/include/linux/sunrpc/svcsock.h +++ b/include/linux/sunrpc/svcsock.h @@ -34,7 +34,7 @@ struct svc_sock { /* * Function prototypes. */ -void svc_close_all(struct svc_serv *); +void svc_close_net(struct svc_serv *, struct net *); int svc_recv(struct svc_rqst *, long); int svc_send(struct svc_rqst *); void svc_drop(struct svc_rqst *); diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 15518a152ac3..77d278defa70 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -21,8 +21,8 @@ #define RPC_MIN_SLOT_TABLE (2U) #define RPC_DEF_SLOT_TABLE (16U) -#define RPC_MAX_SLOT_TABLE (128U) #define RPC_MAX_SLOT_TABLE_LIMIT (65536U) +#define RPC_MAX_SLOT_TABLE RPC_MAX_SLOT_TABLE_LIMIT /* * This describes a timeout strategy @@ -219,13 +219,17 @@ struct rpc_xprt { connect_time, /* jiffies waiting for connect */ sends, /* how many complete requests */ recvs, /* how many complete requests */ - bad_xids; /* lookup_rqst didn't find XID */ + bad_xids, /* lookup_rqst didn't find XID */ + max_slots; /* max rpc_slots used */ unsigned long long req_u, /* average requests on the wire */ - bklog_u; /* backlog queue utilization */ + bklog_u, /* backlog queue utilization */ + sending_u, /* send q utilization */ + pending_u; /* pend q utilization */ } stat; struct net *xprt_net; + const char *servername; const char *address_strings[RPC_DISPLAY_MAX]; }; @@ -255,6 +259,7 @@ struct xprt_create { struct sockaddr * srcaddr; /* optional local address */ struct sockaddr * dstaddr; /* remote peer address */ size_t addrlen; + const char *servername; struct svc_xprt *bc_xprt; /* NFSv4.1 backchannel */ }; diff --git a/include/linux/sunrpc/xprtsock.h b/include/linux/sunrpc/xprtsock.h index 3f14a02e9cc0..1ad36cc25b2e 100644 --- a/include/linux/sunrpc/xprtsock.h +++ b/include/linux/sunrpc/xprtsock.h @@ -12,18 +12,6 @@ int init_socket_xprt(void); void cleanup_socket_xprt(void); -/* - * RPC slot table sizes for UDP, TCP transports - */ -extern unsigned int xprt_udp_slot_table_entries; -extern unsigned int xprt_tcp_slot_table_entries; - -/* - * Parameters for choosing a free port - */ -extern unsigned int xprt_min_resvport; -extern unsigned int xprt_max_resvport; - #define RPC_MIN_RESVPORT (1U) #define RPC_MAX_RESVPORT (65535U) #define RPC_DEF_MIN_RESVPORT (665U) diff --git a/include/linux/swap.h b/include/linux/swap.h index 3e60228e7299..8dc0ea7caf02 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -21,6 +21,9 @@ struct bio; #define SWAP_FLAG_PRIO_SHIFT 0 #define SWAP_FLAG_DISCARD 0x10000 /* discard swap cluster after use */ +#define SWAP_FLAGS_VALID (SWAP_FLAG_PRIO_MASK | SWAP_FLAG_PREFER | \ + SWAP_FLAG_DISCARD) + static inline int current_is_kswapd(void) { return current->flags & PF_KSWAPD; @@ -223,6 +226,7 @@ extern void lru_add_page_tail(struct zone* zone, extern void activate_page(struct page *); extern void mark_page_accessed(struct page *); extern void lru_add_drain(void); +extern void lru_add_drain_cpu(int cpu); extern int lru_add_drain_all(void); extern void rotate_reclaimable_page(struct page *page); extern void deactivate_page(struct page *page); @@ -329,7 +333,6 @@ extern long total_swap_pages; extern void si_swapinfo(struct sysinfo *); extern swp_entry_t get_swap_page(void); extern swp_entry_t get_swap_page_of_type(int); -extern int valid_swaphandles(swp_entry_t, unsigned long *); extern int add_swap_count_continuation(swp_entry_t, gfp_t); extern void swap_shmem_alloc(swp_entry_t); extern int swap_duplicate(swp_entry_t); diff --git a/include/linux/swapops.h b/include/linux/swapops.h index 2189d3ffc85d..792d16d9cbc7 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -2,6 +2,7 @@ #define _LINUX_SWAPOPS_H #include <linux/radix-tree.h> +#include <linux/bug.h> /* * swapcache pages are stored in the swapper_space radix tree. We want to diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 8ec1153ff57b..3de3acb84a95 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -68,6 +68,7 @@ struct file_handle; #include <linux/aio_abi.h> #include <linux/capability.h> #include <linux/list.h> +#include <linux/bug.h> #include <linux/sem.h> #include <asm/siginfo.h> #include <asm/signal.h> diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index bb9127dd814b..c34b4c82b0dc 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -932,34 +932,14 @@ enum #include <linux/list.h> #include <linux/rcupdate.h> #include <linux/wait.h> +#include <linux/rbtree.h> /* For the /proc/sys support */ struct ctl_table; struct nsproxy; struct ctl_table_root; - -struct ctl_table_set { - struct list_head list; - struct ctl_table_set *parent; - int (*is_seen)(struct ctl_table_set *); -}; - -extern void setup_sysctl_set(struct ctl_table_set *p, - struct ctl_table_set *parent, - int (*is_seen)(struct ctl_table_set *)); - struct ctl_table_header; - -extern void sysctl_head_get(struct ctl_table_header *); -extern void sysctl_head_put(struct ctl_table_header *); -extern int sysctl_is_seen(struct ctl_table_header *); -extern struct ctl_table_header *sysctl_head_grab(struct ctl_table_header *); -extern struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev); -extern struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces, - struct ctl_table_header *prev); -extern void sysctl_head_finish(struct ctl_table_header *prev); -extern int sysctl_perm(struct ctl_table_root *root, - struct ctl_table *table, int op); +struct ctl_dir; typedef struct ctl_table ctl_table; @@ -1023,8 +1003,6 @@ static inline void *proc_sys_poll_event(struct ctl_table_poll *poll) return (void *)(unsigned long)atomic_read(&poll->event); } -void proc_sys_poll_notify(struct ctl_table_poll *poll); - #define __CTL_TABLE_POLL_INITIALIZER(name) { \ .event = ATOMIC_INIT(0), \ .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait) } @@ -1039,21 +1017,16 @@ struct ctl_table void *data; int maxlen; umode_t mode; - struct ctl_table *child; - struct ctl_table *parent; /* Automatically set */ + struct ctl_table *child; /* Deprecated */ proc_handler *proc_handler; /* Callback for text formatting */ struct ctl_table_poll *poll; void *extra1; void *extra2; }; -struct ctl_table_root { - struct list_head root_list; - struct ctl_table_set default_set; - struct ctl_table_set *(*lookup)(struct ctl_table_root *root, - struct nsproxy *namespaces); - int (*permissions)(struct ctl_table_root *root, - struct nsproxy *namespaces, struct ctl_table *table); +struct ctl_node { + struct rb_node node; + struct ctl_table_header *header; }; /* struct ctl_table_header is used to maintain dynamic lists of @@ -1063,9 +1036,9 @@ struct ctl_table_header union { struct { struct ctl_table *ctl_table; - struct list_head ctl_entry; int used; int count; + int nreg; }; struct rcu_head rcu; }; @@ -1073,9 +1046,27 @@ struct ctl_table_header struct ctl_table *ctl_table_arg; struct ctl_table_root *root; struct ctl_table_set *set; - struct ctl_table *attached_by; - struct ctl_table *attached_to; - struct ctl_table_header *parent; + struct ctl_dir *parent; + struct ctl_node *node; +}; + +struct ctl_dir { + /* Header must be at the start of ctl_dir */ + struct ctl_table_header header; + struct rb_root root; +}; + +struct ctl_table_set { + int (*is_seen)(struct ctl_table_set *); + struct ctl_dir dir; +}; + +struct ctl_table_root { + struct ctl_table_set default_set; + struct ctl_table_set *(*lookup)(struct ctl_table_root *root, + struct nsproxy *namespaces); + int (*permissions)(struct ctl_table_root *root, + struct nsproxy *namespaces, struct ctl_table *table); }; /* struct ctl_path describes where in the hierarchy a table is added */ @@ -1083,16 +1074,53 @@ struct ctl_path { const char *procname; }; +#ifdef CONFIG_SYSCTL + +void proc_sys_poll_notify(struct ctl_table_poll *poll); + +extern void setup_sysctl_set(struct ctl_table_set *p, + struct ctl_table_root *root, + int (*is_seen)(struct ctl_table_set *)); +extern void retire_sysctl_set(struct ctl_table_set *set); + void register_sysctl_root(struct ctl_table_root *root); +struct ctl_table_header *__register_sysctl_table( + struct ctl_table_set *set, + const char *path, struct ctl_table *table); struct ctl_table_header *__register_sysctl_paths( - struct ctl_table_root *root, struct nsproxy *namespaces, + struct ctl_table_set *set, const struct ctl_path *path, struct ctl_table *table); +struct ctl_table_header *register_sysctl(const char *path, struct ctl_table *table); struct ctl_table_header *register_sysctl_table(struct ctl_table * table); struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path, struct ctl_table *table); void unregister_sysctl_table(struct ctl_table_header * table); -int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table); + +extern int sysctl_init(void); +#else /* CONFIG_SYSCTL */ +static inline struct ctl_table_header *register_sysctl_table(struct ctl_table * table) +{ + return NULL; +} + +static inline struct ctl_table_header *register_sysctl_paths( + const struct ctl_path *path, struct ctl_table *table) +{ + return NULL; +} + +static inline void unregister_sysctl_table(struct ctl_table_header * table) +{ +} + +static inline void setup_sysctl_set(struct ctl_table_set *p, + struct ctl_table_root *root, + int (*is_seen)(struct ctl_table_set *)) +{ +} + +#endif /* CONFIG_SYSCTL */ #endif /* __KERNEL__ */ diff --git a/include/linux/sysinfo.h b/include/linux/sysinfo.h new file mode 100644 index 000000000000..934335a22522 --- /dev/null +++ b/include/linux/sysinfo.h @@ -0,0 +1,24 @@ +#ifndef _LINUX_SYSINFO_H +#define _LINUX_SYSINFO_H + +#include <linux/types.h> + +#define SI_LOAD_SHIFT 16 +struct sysinfo { + __kernel_long_t uptime; /* Seconds since boot */ + __kernel_ulong_t loads[3]; /* 1, 5, and 15 minute load averages */ + __kernel_ulong_t totalram; /* Total usable main memory size */ + __kernel_ulong_t freeram; /* Available memory size */ + __kernel_ulong_t sharedram; /* Amount of shared memory */ + __kernel_ulong_t bufferram; /* Memory used by buffers */ + __kernel_ulong_t totalswap; /* Total swap space size */ + __kernel_ulong_t freeswap; /* swap space still available */ + __u16 procs; /* Number of current processes */ + __u16 pad; /* Explicit padding for m68k */ + __kernel_ulong_t totalhigh; /* Total high memory size */ + __kernel_ulong_t freehigh; /* Available high memory size */ + __u32 mem_unit; /* Memory unit size in bytes */ + char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)]; /* Padding: libc5 uses this.. */ +}; + +#endif /* _LINUX_SYSINFO_H */ diff --git a/include/linux/tboot.h b/include/linux/tboot.h index 1dba6ee55203..c75128bed5fa 100644 --- a/include/linux/tboot.h +++ b/include/linux/tboot.h @@ -143,7 +143,6 @@ static inline int tboot_enabled(void) extern void tboot_probe(void); extern void tboot_shutdown(u32 shutdown_type); -extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control); extern struct acpi_table_header *tboot_get_dmar_table( struct acpi_table_header *dmar_tbl); extern int tboot_force_iommu(void); diff --git a/include/linux/time.h b/include/linux/time.h index b3061782dec3..33a92ead4d88 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -116,7 +116,6 @@ static inline struct timespec timespec_sub(struct timespec lhs, extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); extern int update_persistent_clock(struct timespec now); -extern int no_sync_cmos_clock __read_mostly; void timekeeping_init(void); extern int timekeeping_suspended; @@ -256,6 +255,7 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); a->tv_nsec = ns; } + #endif /* __KERNEL__ */ #define NFDBITS __NFDBITS diff --git a/include/linux/timex.h b/include/linux/timex.h index b75e1864ed19..99bc88b1fc02 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -252,7 +252,7 @@ extern void ntp_clear(void); /* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */ extern u64 ntp_tick_length(void); -extern void second_overflow(void); +extern int second_overflow(unsigned long secs); extern int do_adjtimex(struct timex *); extern void hardpps(const struct timespec *, const struct timespec *); diff --git a/include/linux/trace_seq.h b/include/linux/trace_seq.h index 7dadc3df0c77..a32d86ec8bf2 100644 --- a/include/linux/trace_seq.h +++ b/include/linux/trace_seq.h @@ -44,7 +44,7 @@ extern int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len); extern int trace_seq_putmem_hex(struct trace_seq *s, const void *mem, size_t len); extern void *trace_seq_reserve(struct trace_seq *s, size_t len); -extern int trace_seq_path(struct trace_seq *s, struct path *path); +extern int trace_seq_path(struct trace_seq *s, const struct path *path); #else /* CONFIG_TRACING */ static inline int trace_seq_printf(struct trace_seq *s, const char *fmt, ...) @@ -88,7 +88,7 @@ static inline void *trace_seq_reserve(struct trace_seq *s, size_t len) { return NULL; } -static inline int trace_seq_path(struct trace_seq *s, struct path *path) +static inline int trace_seq_path(struct trace_seq *s, const struct path *path) { return 0; } diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index a71a2927a6a0..51bd91d911c3 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -54,12 +54,12 @@ struct linux_binprm; /* * ptrace report for syscall entry and exit looks identical. */ -static inline void ptrace_report_syscall(struct pt_regs *regs) +static inline int ptrace_report_syscall(struct pt_regs *regs) { int ptrace = current->ptrace; if (!(ptrace & PT_PTRACED)) - return; + return 0; ptrace_notify(SIGTRAP | ((ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); @@ -72,6 +72,8 @@ static inline void ptrace_report_syscall(struct pt_regs *regs) send_sig(current->exit_code, current, 1); current->exit_code = 0; } + + return fatal_signal_pending(current); } /** @@ -96,8 +98,7 @@ static inline void ptrace_report_syscall(struct pt_regs *regs) static inline __must_check int tracehook_report_syscall_entry( struct pt_regs *regs) { - ptrace_report_syscall(regs); - return 0; + return ptrace_report_syscall(regs); } /** diff --git a/include/linux/transport_class.h b/include/linux/transport_class.h index 9ae8da3e6407..11087cdd4ad3 100644 --- a/include/linux/transport_class.h +++ b/include/linux/transport_class.h @@ -10,6 +10,7 @@ #define _TRANSPORT_CLASS_H_ #include <linux/device.h> +#include <linux/bug.h> #include <linux/attribute_container.h> struct transport_container; diff --git a/include/linux/tty.h b/include/linux/tty.h index a91ff403b3bf..9f47ab540f65 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -44,7 +44,6 @@ #include <linux/tty_ldisc.h> #include <linux/mutex.h> -#include <asm/system.h> /* diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 5e11f8a1f867..c9c9a4680cc5 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -235,16 +235,25 @@ struct v4l2_fract { __u32 denominator; }; -/* - * D R I V E R C A P A B I L I T I E S - */ +/** + * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP + * + * @driver: name of the driver module (e.g. "bttv") + * @card: name of the card (e.g. "Hauppauge WinTV") + * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) ) + * @version: KERNEL_VERSION + * @capabilities: capabilities of the physical device as a whole + * @device_caps: capabilities accessed via this particular device (node) + * @reserved: reserved fields for future extensions + */ struct v4l2_capability { - __u8 driver[16]; /* i.e. "bttv" */ - __u8 card[32]; /* i.e. "Hauppauge WinTV" */ - __u8 bus_info[32]; /* "PCI:" + pci_name(pci_dev) */ - __u32 version; /* should use KERNEL_VERSION() */ - __u32 capabilities; /* Device capabilities */ - __u32 reserved[4]; + __u8 driver[16]; + __u8 card[32]; + __u8 bus_info[32]; + __u32 version; + __u32 capabilities; + __u32 device_caps; + __u32 reserved[3]; }; /* Values for 'capabilities' field */ @@ -274,6 +283,8 @@ struct v4l2_capability { #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ +#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ + /* * V I D E O I M A G E F O R M A T */ @@ -751,20 +762,20 @@ struct v4l2_crop { /* Selection targets */ -/* current cropping area */ -#define V4L2_SEL_TGT_CROP_ACTIVE 0 -/* default cropping area */ -#define V4L2_SEL_TGT_CROP_DEFAULT 1 -/* cropping bounds */ -#define V4L2_SEL_TGT_CROP_BOUNDS 2 -/* current composing area */ -#define V4L2_SEL_TGT_COMPOSE_ACTIVE 256 -/* default composing area */ -#define V4L2_SEL_TGT_COMPOSE_DEFAULT 257 -/* composing bounds */ -#define V4L2_SEL_TGT_COMPOSE_BOUNDS 258 -/* current composing area plus all padding pixels */ -#define V4L2_SEL_TGT_COMPOSE_PADDED 259 +/* Current cropping area */ +#define V4L2_SEL_TGT_CROP_ACTIVE 0x0000 +/* Default cropping area */ +#define V4L2_SEL_TGT_CROP_DEFAULT 0x0001 +/* Cropping bounds */ +#define V4L2_SEL_TGT_CROP_BOUNDS 0x0002 +/* Current composing area */ +#define V4L2_SEL_TGT_COMPOSE_ACTIVE 0x0100 +/* Default composing area */ +#define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101 +/* Composing bounds */ +#define V4L2_SEL_TGT_COMPOSE_BOUNDS 0x0102 +/* Current composing area plus all padding pixels */ +#define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103 /** * struct v4l2_selection - selection info @@ -774,7 +785,7 @@ struct v4l2_crop { * @r: coordinates of selection window * @reserved: for future use, rounds structure size to 64 bytes, set to zero * - * Hardware may use multiple helper window to process a video stream. + * Hardware may use multiple helper windows to process a video stream. * The structure is used to exchange this selection areas between * an application and a driver. */ @@ -1125,6 +1136,7 @@ struct v4l2_ext_controls { #define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ #define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */ #define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */ +#define V4L2_CTRL_CLASS_JPEG 0x009d0000 /* JPEG-compression controls */ #define V4L2_CTRL_ID_MASK (0x0fffffff) #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) @@ -1396,6 +1408,16 @@ enum v4l2_mpeg_audio_ac3_bitrate { V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17, V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18, }; +#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK (V4L2_CID_MPEG_BASE+112) +enum v4l2_mpeg_audio_dec_playback { + V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO = 0, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO = 1, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT = 2, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT = 3, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO = 4, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5, +}; +#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113) /* MPEG video controls specific to multiplexed streams */ #define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200) @@ -1446,6 +1468,9 @@ enum v4l2_mpeg_video_multi_slice_mode { V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES = 2, }; #define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222) +#define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223) +#define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224) + #define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) #define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) #define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302) @@ -1734,6 +1759,29 @@ enum v4l2_flash_strobe_source { #define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11) #define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12) +/* JPEG-class control IDs defined by V4L2 */ +#define V4L2_CID_JPEG_CLASS_BASE (V4L2_CTRL_CLASS_JPEG | 0x900) +#define V4L2_CID_JPEG_CLASS (V4L2_CTRL_CLASS_JPEG | 1) + +#define V4L2_CID_JPEG_CHROMA_SUBSAMPLING (V4L2_CID_JPEG_CLASS_BASE + 1) +enum v4l2_jpeg_chroma_subsampling { + V4L2_JPEG_CHROMA_SUBSAMPLING_444 = 0, + V4L2_JPEG_CHROMA_SUBSAMPLING_422 = 1, + V4L2_JPEG_CHROMA_SUBSAMPLING_420 = 2, + V4L2_JPEG_CHROMA_SUBSAMPLING_411 = 3, + V4L2_JPEG_CHROMA_SUBSAMPLING_410 = 4, + V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY = 5, +}; +#define V4L2_CID_JPEG_RESTART_INTERVAL (V4L2_CID_JPEG_CLASS_BASE + 2) +#define V4L2_CID_JPEG_COMPRESSION_QUALITY (V4L2_CID_JPEG_CLASS_BASE + 3) + +#define V4L2_CID_JPEG_ACTIVE_MARKER (V4L2_CID_JPEG_CLASS_BASE + 4) +#define V4L2_JPEG_ACTIVE_MARKER_APP0 (1 << 0) +#define V4L2_JPEG_ACTIVE_MARKER_APP1 (1 << 1) +#define V4L2_JPEG_ACTIVE_MARKER_COM (1 << 16) +#define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17) +#define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18) + /* * T U N I N G */ @@ -1897,6 +1945,54 @@ struct v4l2_encoder_cmd { }; }; +/* Decoder commands */ +#define V4L2_DEC_CMD_START (0) +#define V4L2_DEC_CMD_STOP (1) +#define V4L2_DEC_CMD_PAUSE (2) +#define V4L2_DEC_CMD_RESUME (3) + +/* Flags for V4L2_DEC_CMD_START */ +#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0) + +/* Flags for V4L2_DEC_CMD_PAUSE */ +#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0) + +/* Flags for V4L2_DEC_CMD_STOP */ +#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0) +#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1) + +/* Play format requirements (returned by the driver): */ + +/* The decoder has no special format requirements */ +#define V4L2_DEC_START_FMT_NONE (0) +/* The decoder requires full GOPs */ +#define V4L2_DEC_START_FMT_GOP (1) + +/* The structure must be zeroed before use by the application + This ensures it can be extended safely in the future. */ +struct v4l2_decoder_cmd { + __u32 cmd; + __u32 flags; + union { + struct { + __u64 pts; + } stop; + + struct { + /* 0 or 1000 specifies normal speed, + 1 specifies forward single stepping, + -1 specifies backward single stepping, + >1: playback at speed/1000 of the normal speed, + <-1: reverse playback at (-speed/1000) of the normal speed. */ + __s32 speed; + __u32 format; + } start; + + struct { + __u32 data[16]; + } raw; + }; +}; #endif @@ -2307,6 +2403,11 @@ struct v4l2_create_buffers { #define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection) #define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection) +/* Experimental, these two ioctls may change over the next couple of kernel + versions. */ +#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd) +#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd) + /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ diff --git a/include/linux/virtio.h b/include/linux/virtio.h index d0018d27c281..8efd28ae5597 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -96,7 +96,6 @@ struct virtio_driver { void (*config_changed)(struct virtio_device *dev); #ifdef CONFIG_PM int (*freeze)(struct virtio_device *dev); - int (*thaw)(struct virtio_device *dev); int (*restore)(struct virtio_device *dev); #endif }; diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 5206d6541da5..7323a3390206 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -53,6 +53,7 @@ #ifdef __KERNEL__ #include <linux/err.h> +#include <linux/bug.h> #include <linux/virtio.h> /** diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h index 85bb0bb66ffc..7529b854b7fd 100644 --- a/include/linux/virtio_ids.h +++ b/include/linux/virtio_ids.h @@ -34,6 +34,8 @@ #define VIRTIO_ID_CONSOLE 3 /* virtio console */ #define VIRTIO_ID_RNG 4 /* virtio ring */ #define VIRTIO_ID_BALLOON 5 /* virtio balloon */ +#define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ +#define VIRTIO_ID_SCSI 8 /* virtio scsi */ #define VIRTIO_ID_9P 9 /* 9p virtio console */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h new file mode 100644 index 000000000000..8ddeafdc0546 --- /dev/null +++ b/include/linux/virtio_scsi.h @@ -0,0 +1,114 @@ +#ifndef _LINUX_VIRTIO_SCSI_H +#define _LINUX_VIRTIO_SCSI_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. */ + +#define VIRTIO_SCSI_CDB_SIZE 32 +#define VIRTIO_SCSI_SENSE_SIZE 96 + +/* SCSI command request, followed by data-out */ +struct virtio_scsi_cmd_req { + u8 lun[8]; /* Logical Unit Number */ + u64 tag; /* Command identifier */ + u8 task_attr; /* Task attribute */ + u8 prio; + u8 crn; + u8 cdb[VIRTIO_SCSI_CDB_SIZE]; +} __packed; + +/* Response, followed by sense data and data-in */ +struct virtio_scsi_cmd_resp { + u32 sense_len; /* Sense data length */ + u32 resid; /* Residual bytes in data buffer */ + u16 status_qualifier; /* Status qualifier */ + u8 status; /* Command completion status */ + u8 response; /* Response values */ + u8 sense[VIRTIO_SCSI_SENSE_SIZE]; +} __packed; + +/* Task Management Request */ +struct virtio_scsi_ctrl_tmf_req { + u32 type; + u32 subtype; + u8 lun[8]; + u64 tag; +} __packed; + +struct virtio_scsi_ctrl_tmf_resp { + u8 response; +} __packed; + +/* Asynchronous notification query/subscription */ +struct virtio_scsi_ctrl_an_req { + u32 type; + u8 lun[8]; + u32 event_requested; +} __packed; + +struct virtio_scsi_ctrl_an_resp { + u32 event_actual; + u8 response; +} __packed; + +struct virtio_scsi_event { + u32 event; + u8 lun[8]; + u32 reason; +} __packed; + +struct virtio_scsi_config { + u32 num_queues; + u32 seg_max; + u32 max_sectors; + u32 cmd_per_lun; + u32 event_info_size; + u32 sense_size; + u32 cdb_size; + u16 max_channel; + u16 max_target; + u32 max_lun; +} __packed; + +/* Response codes */ +#define VIRTIO_SCSI_S_OK 0 +#define VIRTIO_SCSI_S_OVERRUN 1 +#define VIRTIO_SCSI_S_ABORTED 2 +#define VIRTIO_SCSI_S_BAD_TARGET 3 +#define VIRTIO_SCSI_S_RESET 4 +#define VIRTIO_SCSI_S_BUSY 5 +#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6 +#define VIRTIO_SCSI_S_TARGET_FAILURE 7 +#define VIRTIO_SCSI_S_NEXUS_FAILURE 8 +#define VIRTIO_SCSI_S_FAILURE 9 +#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10 +#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11 +#define VIRTIO_SCSI_S_INCORRECT_LUN 12 + +/* Controlq type codes. */ +#define VIRTIO_SCSI_T_TMF 0 +#define VIRTIO_SCSI_T_AN_QUERY 1 +#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2 + +/* Valid TMF subtypes. */ +#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0 +#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1 +#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2 +#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3 +#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4 +#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5 +#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6 +#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7 + +/* Events. */ +#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000 +#define VIRTIO_SCSI_T_NO_EVENT 0 +#define VIRTIO_SCSI_T_TRANSPORT_RESET 1 +#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2 + +#define VIRTIO_SCSI_S_SIMPLE 0 +#define VIRTIO_SCSI_S_ORDERED 1 +#define VIRTIO_SCSI_S_HEAD 2 +#define VIRTIO_SCSI_S_ACA 3 + + +#endif /* _LINUX_VIRTIO_SCSI_H */ diff --git a/include/linux/wait.h b/include/linux/wait.h index 7d9a9e990ce6..1dee81c41ff1 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -22,7 +22,6 @@ #include <linux/list.h> #include <linux/stddef.h> #include <linux/spinlock.h> -#include <asm/system.h> #include <asm/current.h> typedef struct __wait_queue wait_queue_t; diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index 43ba5b3ce2a3..ac40716b44e9 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -66,6 +66,7 @@ struct watchdog_device; * @ping: The routine that sends a keepalive ping to the watchdog device. * @status: The routine that shows the status of the watchdog device. * @set_timeout:The routine for setting the watchdog devices timeout value. + * @get_timeleft:The routine that get's the time that's left before a reset. * @ioctl: The routines that handles extra ioctl calls. * * The watchdog_ops structure contains a list of low-level operations @@ -82,6 +83,7 @@ struct watchdog_ops { int (*ping)(struct watchdog_device *); unsigned int (*status)(struct watchdog_device *); int (*set_timeout)(struct watchdog_device *, unsigned int); + unsigned int (*get_timeleft)(struct watchdog_device *); long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); }; @@ -127,7 +129,7 @@ struct watchdog_device { #endif /* Use the following function to set the nowayout feature */ -static inline void watchdog_set_nowayout(struct watchdog_device *wdd, int nowayout) +static inline void watchdog_set_nowayout(struct watchdog_device *wdd, bool nowayout) { if (nowayout) set_bit(WDOG_NO_WAY_OUT, &wdd->status); diff --git a/include/linux/wimax/debug.h b/include/linux/wimax/debug.h index 57031b4d12f2..aaf24ba12c4d 100644 --- a/include/linux/wimax/debug.h +++ b/include/linux/wimax/debug.h @@ -154,9 +154,9 @@ #define __debug__h__ #include <linux/types.h> -#include <linux/device.h> #include <linux/slab.h> +struct device; /* Backend stuff */ diff --git a/include/media/adv7183.h b/include/media/adv7183.h new file mode 100644 index 000000000000..c5c2d377c0a6 --- /dev/null +++ b/include/media/adv7183.h @@ -0,0 +1,47 @@ +/* + * adv7183.h - definition for adv7183 inputs and outputs + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ADV7183_H_ +#define _ADV7183_H_ + +/* ADV7183 HW inputs */ +#define ADV7183_COMPOSITE0 0 /* CVBS in on AIN1 */ +#define ADV7183_COMPOSITE1 1 /* CVBS in on AIN2 */ +#define ADV7183_COMPOSITE2 2 /* CVBS in on AIN3 */ +#define ADV7183_COMPOSITE3 3 /* CVBS in on AIN4 */ +#define ADV7183_COMPOSITE4 4 /* CVBS in on AIN5 */ +#define ADV7183_COMPOSITE5 5 /* CVBS in on AIN6 */ +#define ADV7183_COMPOSITE6 6 /* CVBS in on AIN7 */ +#define ADV7183_COMPOSITE7 7 /* CVBS in on AIN8 */ +#define ADV7183_COMPOSITE8 8 /* CVBS in on AIN9 */ +#define ADV7183_COMPOSITE9 9 /* CVBS in on AIN10 */ +#define ADV7183_COMPOSITE10 10 /* CVBS in on AIN11 */ + +#define ADV7183_SVIDEO0 11 /* Y on AIN1, C on AIN4 */ +#define ADV7183_SVIDEO1 12 /* Y on AIN2, C on AIN5 */ +#define ADV7183_SVIDEO2 13 /* Y on AIN3, C on AIN6 */ + +#define ADV7183_COMPONENT0 14 /* Y on AIN1, Pr on AIN4, Pb on AIN5 */ +#define ADV7183_COMPONENT1 15 /* Y on AIN2, Pr on AIN3, Pb on AIN6 */ + +/* ADV7183 HW outputs */ +#define ADV7183_8BIT_OUT 0 +#define ADV7183_16BIT_OUT 1 + +#endif diff --git a/include/media/blackfin/bfin_capture.h b/include/media/blackfin/bfin_capture.h new file mode 100644 index 000000000000..2038a8a3f8aa --- /dev/null +++ b/include/media/blackfin/bfin_capture.h @@ -0,0 +1,37 @@ +#ifndef _BFIN_CAPTURE_H_ +#define _BFIN_CAPTURE_H_ + +#include <linux/i2c.h> + +struct v4l2_input; +struct ppi_info; + +struct bcap_route { + u32 input; + u32 output; +}; + +struct bfin_capture_config { + /* card name */ + char *card_name; + /* inputs available at the sub device */ + struct v4l2_input *inputs; + /* number of inputs supported */ + int num_inputs; + /* routing information for each input */ + struct bcap_route *routes; + /* i2c bus adapter no */ + int i2c_adapter_id; + /* i2c subdevice board info */ + struct i2c_board_info board_info; + /* ppi board info */ + const struct ppi_info *ppi_info; + /* ppi control */ + unsigned long ppi_control; + /* ppi interrupt mask */ + u32 int_mask; + /* horizontal blanking clocks */ + int blank_clocks; +}; + +#endif diff --git a/include/media/blackfin/ppi.h b/include/media/blackfin/ppi.h new file mode 100644 index 000000000000..8f72f8a0b3d0 --- /dev/null +++ b/include/media/blackfin/ppi.h @@ -0,0 +1,74 @@ +/* + * Analog Devices PPI header file + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _PPI_H_ +#define _PPI_H_ + +#include <linux/interrupt.h> + +#ifdef EPPI_EN +#define PORT_EN EPPI_EN +#define DMA32 0 +#define PACK_EN PACKEN +#endif + +struct ppi_if; + +struct ppi_params { + int width; + int height; + int bpp; + unsigned long ppi_control; + u32 int_mask; + int blank_clocks; +}; + +struct ppi_ops { + int (*attach_irq)(struct ppi_if *ppi, irq_handler_t handler); + void (*detach_irq)(struct ppi_if *ppi); + int (*start)(struct ppi_if *ppi); + int (*stop)(struct ppi_if *ppi); + int (*set_params)(struct ppi_if *ppi, struct ppi_params *params); + void (*update_addr)(struct ppi_if *ppi, unsigned long addr); +}; + +enum ppi_type { + PPI_TYPE_PPI, + PPI_TYPE_EPPI, +}; + +struct ppi_info { + enum ppi_type type; + int dma_ch; + int irq_err; + void __iomem *base; + const unsigned short *pin_req; +}; + +struct ppi_if { + unsigned long ppi_control; + const struct ppi_ops *ops; + const struct ppi_info *info; + bool err_int; + void *priv; +}; + +struct ppi_if *ppi_create_instance(const struct ppi_info *info); +void ppi_delete_instance(struct ppi_if *ppi); +#endif diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h index 9929b05cff3a..bd8217c2577c 100644 --- a/include/media/davinci/vpif_types.h +++ b/include/media/davinci/vpif_types.h @@ -17,6 +17,8 @@ #ifndef _VPIF_TYPES_H #define _VPIF_TYPES_H +#include <linux/i2c.h> + #define VPIF_CAPTURE_MAX_CHANNELS 2 enum vpif_if_type { diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h new file mode 100644 index 000000000000..67797bf5d432 --- /dev/null +++ b/include/media/gpio-ir-recv.h @@ -0,0 +1,22 @@ +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __GPIO_IR_RECV_H__ +#define __GPIO_IR_RECV_H__ + +struct gpio_ir_recv_platform_data { + int gpio_nr; + bool active_low; +}; + +#endif /* __GPIO_IR_RECV_H__ */ + diff --git a/include/media/media-device.h b/include/media/media-device.h index 6a27d916c250..eaade9815bb6 100644 --- a/include/media/media-device.h +++ b/include/media/media-device.h @@ -23,7 +23,6 @@ #ifndef _MEDIA_DEVICE_H #define _MEDIA_DEVICE_H -#include <linux/device.h> #include <linux/list.h> #include <linux/mutex.h> #include <linux/spinlock.h> @@ -31,6 +30,8 @@ #include <media/media-devnode.h> #include <media/media-entity.h> +struct device; + /** * struct media_device - Media device * @dev: Parent device diff --git a/include/media/mt9m032.h b/include/media/mt9m032.h new file mode 100644 index 000000000000..c3a78114d7a6 --- /dev/null +++ b/include/media/mt9m032.h @@ -0,0 +1,36 @@ +/* + * Driver for MT9M032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010-2011 Lund Engineering + * Contact: Gil Lund <gwlund@lundeng.com> + * Author: Martin Hostettler <martin@neutronstar.dyndns.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef MT9M032_H +#define MT9M032_H + +#define MT9M032_NAME "mt9m032" +#define MT9M032_I2C_ADDR (0xb8 >> 1) + +struct mt9m032_platform_data { + u32 ext_clock; + u32 pix_clock; + bool invert_pixclock; + +}; +#endif /* MT9M032_H */ diff --git a/include/media/rc-map.h b/include/media/rc-map.h index f688bde61228..8db6741c1256 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -102,8 +102,11 @@ void rc_map_init(void); #define RC_MAP_IMON_MCE "rc-imon-mce" #define RC_MAP_IMON_PAD "rc-imon-pad" #define RC_MAP_IODATA_BCTV7E "rc-iodata-bctv7e" +#define RC_MAP_IT913X_V1 "rc-it913x-v1" +#define RC_MAP_IT913X_V2 "rc-it913x-v2" #define RC_MAP_KAIOMY "rc-kaiomy" #define RC_MAP_KWORLD_315U "rc-kworld-315u" +#define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u" #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog" #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051" #define RC_MAP_LIRC "rc-lirc" diff --git a/include/media/s5p_hdmi.h b/include/media/s5p_hdmi.h new file mode 100644 index 000000000000..361a751f73af --- /dev/null +++ b/include/media/s5p_hdmi.h @@ -0,0 +1,35 @@ +/* + * Driver header for S5P HDMI chip. + * + * Copyright (c) 2011 Samsung Electronics, Co. Ltd + * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5P_HDMI_H +#define S5P_HDMI_H + +struct i2c_board_info; + +/** + * @hdmiphy_bus: controller id for HDMIPHY bus + * @hdmiphy_info: template for HDMIPHY I2C device + * @mhl_bus: controller id for MHL control bus + * @mhl_info: template for MHL I2C device + * + * NULL pointer for *_info fields indicates that + * the corresponding chip is not present + */ +struct s5p_hdmi_platform_data { + int hdmiphy_bus; + struct i2c_board_info *hdmiphy_info; + int mhl_bus; + struct i2c_board_info *mhl_info; +}; + +#endif /* S5P_HDMI_H */ + diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h index 48413b410f15..a90a765f18da 100644 --- a/include/media/sh_mobile_ceu.h +++ b/include/media/sh_mobile_ceu.h @@ -18,6 +18,8 @@ struct sh_mobile_ceu_companion { struct sh_mobile_ceu_info { unsigned long flags; + int max_width; + int max_height; struct sh_mobile_ceu_companion *csi2; }; diff --git a/include/media/sii9234.h b/include/media/sii9234.h new file mode 100644 index 000000000000..6a4a809fe9a3 --- /dev/null +++ b/include/media/sii9234.h @@ -0,0 +1,24 @@ +/* + * Driver header for SII9234 MHL converter chip. + * + * Copyright (c) 2011 Samsung Electronics, Co. Ltd + * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef SII9234_H +#define SII9234_H + +/** + * @gpio_n_reset: GPIO driving nRESET pin + */ + +struct sii9234_platform_data { + int gpio_n_reset; +}; + +#endif /* SII9234_H */ diff --git a/include/media/tuner.h b/include/media/tuner.h index 29e1920e7339..926aff9bdf65 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -136,6 +136,7 @@ #define TUNER_TENA_TNF_5337 86 #define TUNER_XC4000 87 /* Xceive Silicon Tuner */ +#define TUNER_XC5000C 88 /* Xceive Silicon Tuner */ /* tv card specific */ #define TDA9887_PRESENT (1<<0) diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index 810a20928a21..7395c815939d 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -143,6 +143,9 @@ enum { /* module saa6588: just ident 6588 */ V4L2_IDENT_SAA6588 = 6588, + /* module vs6624: just ident 6624 */ + V4L2_IDENT_VS6624 = 6624, + /* module saa6752hs: reserved range 6750-6759 */ V4L2_IDENT_SAA6752HS = 6752, V4L2_IDENT_SAA6752HS_AC3 = 6753, @@ -162,6 +165,9 @@ enum { /* module adv7180: just ident 7180 */ V4L2_IDENT_ADV7180 = 7180, + /* module adv7183: just ident 7183 */ + V4L2_IDENT_ADV7183 = 7183, + /* module saa7185: just ident 7185 */ V4L2_IDENT_SAA7185 = 7185, diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index eeb3df637144..11e67562b3ac 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -22,7 +22,6 @@ #define _V4L2_CTRLS_H #include <linux/list.h> -#include <linux/device.h> #include <linux/videodev2.h> /* forward references */ @@ -33,6 +32,7 @@ struct video_device; struct v4l2_subdev; struct v4l2_subscribed_event; struct v4l2_fh; +struct poll_table_struct; /** struct v4l2_ctrl_ops - The control operations that the driver has to provide. * @g_volatile_ctrl: Get a new value for this control. Generally only relevant @@ -492,6 +492,18 @@ void v4l2_ctrl_add_event(struct v4l2_ctrl *ctrl, void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl, struct v4l2_subscribed_event *sev); +/* Can be used as a vidioc_log_status function that just dumps all controls + associated with the filehandle. */ +int v4l2_ctrl_log_status(struct file *file, void *fh); + +/* Can be used as a vidioc_subscribe_event function that just subscribes + control events. */ +int v4l2_ctrl_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); + +/* Can be used as a poll function that just polls for control events. */ +unsigned int v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait); + /* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc); int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm); diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index c7c40f1d2624..96d22215cc88 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -62,6 +62,9 @@ struct v4l2_file_operations { unsigned int (*poll) (struct file *, struct poll_table_struct *); long (*ioctl) (struct file *, unsigned int, unsigned long); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); +#ifdef CONFIG_COMPAT + long (*compat_ioctl32) (struct file *, unsigned int, unsigned long); +#endif unsigned long (*get_unmapped_area) (struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index 3f5d60fc5df6..3cb939cd03f9 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -11,7 +11,6 @@ #include <linux/poll.h> #include <linux/fs.h> -#include <linux/device.h> #include <linux/mutex.h> #include <linux/compiler.h> /* need __user */ #include <linux/videodev2.h> @@ -211,6 +210,10 @@ struct v4l2_ioctl_ops { struct v4l2_encoder_cmd *a); int (*vidioc_try_encoder_cmd) (struct file *file, void *fh, struct v4l2_encoder_cmd *a); + int (*vidioc_decoder_cmd) (struct file *file, void *fh, + struct v4l2_decoder_cmd *a); + int (*vidioc_try_decoder_cmd) (struct file *file, void *fh, + struct v4l2_decoder_cmd *a); /* Stream type-dependent parameter ioctls */ int (*vidioc_g_parm) (struct file *file, void *fh, diff --git a/include/net/af_unix.h b/include/net/af_unix.h index 5a4e29b168c9..ca68e2cef230 100644 --- a/include/net/af_unix.h +++ b/include/net/af_unix.h @@ -49,8 +49,7 @@ struct unix_sock { /* WARNING: sk has to be the first member */ struct sock sk; struct unix_address *addr; - struct dentry *dentry; - struct vfsmount *mnt; + struct path path; struct mutex readlock; struct sock *peer; struct sock *other; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 69b7ad3a9925..83d800c31e3c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -13,6 +13,7 @@ #include <linux/netdevice.h> #include <linux/debugfs.h> #include <linux/list.h> +#include <linux/bug.h> #include <linux/netlink.h> #include <linux/skbuff.h> #include <linux/nl80211.h> @@ -619,8 +620,10 @@ struct sta_bss_parameters { * @llid: mesh local link id * @plid: mesh peer link id * @plink_state: mesh peer link state - * @signal: signal strength of last received packet in dBm - * @signal_avg: signal strength average in dBm + * @signal: the signal strength, type depends on the wiphy's signal_type + NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. + * @signal_avg: avg signal strength, type depends on the wiphy's signal_type + NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @txrate: current unicast bitrate from this station * @rxrate: current unicast bitrate to this station * @rx_packets: packets received from this station diff --git a/include/net/dst.h b/include/net/dst.h index 344c8dd02874..59c5d18cc385 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -12,6 +12,7 @@ #include <linux/netdevice.h> #include <linux/rtnetlink.h> #include <linux/rcupdate.h> +#include <linux/bug.h> #include <linux/jiffies.h> #include <net/neighbour.h> #include <asm/processor.h> diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index ebe517f2da9f..2bdee51ba30d 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -16,6 +16,7 @@ #include <linux/atomic.h> /* for struct atomic_t */ #include <linux/compiler.h> #include <linux/timer.h> +#include <linux/bug.h> #include <net/checksum.h> #include <linux/netfilter.h> /* for union nf_inet_addr */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9a012be615ff..87d203ff7a8a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -13,10 +13,10 @@ #ifndef MAC80211_H #define MAC80211_H +#include <linux/bug.h> #include <linux/kernel.h> #include <linux/if_ether.h> #include <linux/skbuff.h> -#include <linux/device.h> #include <linux/ieee80211.h> #include <net/cfg80211.h> #include <asm/unaligned.h> @@ -87,6 +87,8 @@ * */ +struct device; + /** * enum ieee80211_max_queues - maximum number of queues * diff --git a/include/net/netns/generic.h b/include/net/netns/generic.h index d55f43443335..0931618c0f7f 100644 --- a/include/net/netns/generic.h +++ b/include/net/netns/generic.h @@ -5,6 +5,7 @@ #ifndef __NET_GENERIC_H__ #define __NET_GENERIC_H__ +#include <linux/bug.h> #include <linux/rcupdate.h> /* diff --git a/include/net/red.h b/include/net/red.h index 28068ec614b2..77d4c3745cb5 100644 --- a/include/net/red.h +++ b/include/net/red.h @@ -2,6 +2,7 @@ #define __NET_SCHED_RED_H #include <linux/types.h> +#include <linux/bug.h> #include <net/pkt_sched.h> #include <net/inet_ecn.h> #include <net/dsfield.h> diff --git a/include/net/sock.h b/include/net/sock.h index 04bc0b30e9e9..a6ba1f8871fd 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1854,7 +1854,7 @@ static inline bool wq_has_sleeper(struct socket_wq *wq) static inline void sock_poll_wait(struct file *filp, wait_queue_head_t *wait_address, poll_table *p) { - if (p && wait_address) { + if (!poll_does_not_wait(p) && wait_address) { poll_wait(filp, wait_address, p); /* * We need to be sure we are in sync with the diff --git a/include/net/tcp.h b/include/net/tcp.h index 8607e6aad42b..f75a04d752cb 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -22,6 +22,7 @@ #include <linux/list.h> #include <linux/tcp.h> +#include <linux/bug.h> #include <linux/slab.h> #include <linux/cache.h> #include <linux/percpu.h> diff --git a/include/net/timewait_sock.h b/include/net/timewait_sock.h index 053b3cf2c66a..8d6689cb2c66 100644 --- a/include/net/timewait_sock.h +++ b/include/net/timewait_sock.h @@ -12,6 +12,7 @@ #define _TIMEWAIT_SOCK_H #include <linux/slab.h> +#include <linux/bug.h> #include <net/sock.h> struct timewait_sock_ops { diff --git a/include/net/udp.h b/include/net/udp.h index e39592f682c3..5d606d9da9e5 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -23,6 +23,7 @@ #define _UDP_H #include <linux/list.h> +#include <linux/bug.h> #include <net/inet_sock.h> #include <net/sock.h> #include <net/snmp.h> diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h index d86fffd3c03c..ff27f1b078d1 100644 --- a/include/net/wpan-phy.h +++ b/include/net/wpan-phy.h @@ -23,6 +23,7 @@ #include <linux/netdevice.h> #include <linux/mutex.h> +#include <linux/bug.h> struct wpan_phy { struct mutex pib_lock; diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h index 652dec230514..0d7d67e96d43 100644 --- a/include/scsi/fc/fc_fcp.h +++ b/include/scsi/fc/fc_fcp.h @@ -20,6 +20,8 @@ #ifndef _FC_FCP_H_ #define _FC_FCP_H_ +#include <scsi/scsi.h> + /* * Fibre Channel Protocol for SCSI. * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005. @@ -45,7 +47,7 @@ * FCP_CMND IU Payload. */ struct fcp_cmnd { - __u8 fc_lun[8]; /* logical unit number */ + struct scsi_lun fc_lun; /* logical unit number */ __u8 fc_cmdref; /* command reference number */ __u8 fc_pri_ta; /* priority and task attribute */ __u8 fc_tm_flags; /* task management flags */ @@ -57,7 +59,7 @@ struct fcp_cmnd { #define FCP_CMND_LEN 32 /* expected length of structure */ struct fcp_cmnd32 { - __u8 fc_lun[8]; /* logical unit number */ + struct scsi_lun fc_lun; /* logical unit number */ __u8 fc_cmdref; /* command reference number */ __u8 fc_pri_ta; /* priority and task attribute */ __u8 fc_tm_flags; /* task management flags */ diff --git a/include/scsi/fc/fc_ms.h b/include/scsi/fc/fc_ms.h new file mode 100644 index 000000000000..f52b921b5c70 --- /dev/null +++ b/include/scsi/fc/fc_ms.h @@ -0,0 +1,213 @@ +/* * Copyright(c) 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_MS_H_ +#define _FC_MS_H_ + +#include <linux/types.h> + +/* + * Fibre Channel Services - Management Service (MS) + * From T11.org FC-GS-4 Rev 7.91 February 4, 2004 + */ + +/* + * Fabric Device Management Interface + */ + +/* + * Common-transport sub-type for FDMI + */ +#define FC_FDMI_SUBTYPE 0x10 /* fs_ct_hdr.ct_fs_subtype */ + +/* + * Management server FDMI Requests. + */ +enum fc_fdmi_req { + FC_FDMI_GRHL = 0x0100, /* Get Registered HBA List */ + FC_FDMI_GHAT = 0x0101, /* Get HBA Attributes */ + FC_FDMI_GRPL = 0x0102, /* Get Registered Port List */ + FC_FDMI_GPAT = 0x0110, /* Get Port Attributes */ + FC_FDMI_RHBA = 0x0200, /* Register HBA */ + FC_FDMI_RHAT = 0x0201, /* Register HBA Attributes */ + FC_FDMI_RPRT = 0x0210, /* Register Port */ + FC_FDMI_RPA = 0x0211, /* Register Port Attributes */ + FC_FDMI_DHBA = 0x0300, /* Deregister HBA */ + FC_FDMI_DHAT = 0x0301, /* Deregister HBA Attributes */ + FC_FDMI_DPRT = 0x0310, /* Deregister Port */ + FC_FDMI_DPA = 0x0311, /* Deregister Port Attributes */ +}; + +/* + * HBA Attribute Entry Type + */ +enum fc_fdmi_hba_attr_type { + FC_FDMI_HBA_ATTR_NODENAME = 0x0001, + FC_FDMI_HBA_ATTR_MANUFACTURER = 0x0002, + FC_FDMI_HBA_ATTR_SERIALNUMBER = 0x0003, + FC_FDMI_HBA_ATTR_MODEL = 0x0004, + FC_FDMI_HBA_ATTR_MODELDESCRIPTION = 0x0005, + FC_FDMI_HBA_ATTR_HARDWAREVERSION = 0x0006, + FC_FDMI_HBA_ATTR_DRIVERVERSION = 0x0007, + FC_FDMI_HBA_ATTR_OPTIONROMVERSION = 0x0008, + FC_FDMI_HBA_ATTR_FIRMWAREVERSION = 0x0009, + FC_FDMI_HBA_ATTR_OSNAMEVERSION = 0x000A, + FC_FDMI_HBA_ATTR_MAXCTPAYLOAD = 0x000B, +}; + +/* + * HBA Attribute Length + */ +#define FC_FDMI_HBA_ATTR_NODENAME_LEN 8 +#define FC_FDMI_HBA_ATTR_MANUFACTURER_LEN 64 +#define FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN 64 +#define FC_FDMI_HBA_ATTR_MODEL_LEN 256 +#define FC_FDMI_HBA_ATTR_MODELDESCR_LEN 256 +#define FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_MAXCTPAYLOAD_LEN 4 + +/* + * Port Attribute Type + */ +enum fc_fdmi_port_attr_type { + FC_FDMI_PORT_ATTR_FC4TYPES = 0x0001, + FC_FDMI_PORT_ATTR_SUPPORTEDSPEED = 0x0002, + FC_FDMI_PORT_ATTR_CURRENTPORTSPEED = 0x0003, + FC_FDMI_PORT_ATTR_MAXFRAMESIZE = 0x0004, + FC_FDMI_PORT_ATTR_OSDEVICENAME = 0x0005, + FC_FDMI_PORT_ATTR_HOSTNAME = 0x0006, +}; + +/* + * Port Attribute Length + */ +#define FC_FDMI_PORT_ATTR_FC4TYPES_LEN 32 +#define FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN 4 +#define FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN 4 +#define FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN 4 +#define FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN 256 +#define FC_FDMI_PORT_ATTR_HOSTNAME_LEN 256 + +/* + * HBA Attribute ID + */ +struct fc_fdmi_hba_identifier { + __be64 id; +}; + +/* + * Port Name + */ +struct fc_fdmi_port_name { + __be64 portname; +}; + +/* + * Attribute Entry Block for HBA/Port Attributes + */ +#define FC_FDMI_ATTR_ENTRY_HEADER_LEN 4 +struct fc_fdmi_attr_entry { + __be16 type; + __be16 len; + __u8 value[1]; +} __attribute__((__packed__)); + +/* + * Common for HBA/Port Attributes + */ +struct fs_fdmi_attrs { + __be32 numattrs; + struct fc_fdmi_attr_entry attr[1]; +} __attribute__((__packed__)); + +/* + * Registered Port List + */ +struct fc_fdmi_rpl { + __be32 numport; + struct fc_fdmi_port_name port[1]; +} __attribute__((__packed__)); + +/* + * Register HBA (RHBA) + */ +struct fc_fdmi_rhba { + struct fc_fdmi_hba_identifier hbaid; + struct fc_fdmi_rpl port; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Register HBA Attributes (RHAT) + */ +struct fc_fdmi_rhat { + struct fc_fdmi_hba_identifier hbaid; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Register Port (RPRT) + */ +struct fc_fdmi_rprt { + struct fc_fdmi_hba_identifier hbaid; + struct fc_fdmi_port_name port; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Register Port Attributes (RPA) + */ +struct fc_fdmi_rpa { + struct fc_fdmi_port_name port; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Deregister Port (DPRT) + */ +struct fc_fdmi_dprt { + struct fc_fdmi_port_name port; +} __attribute__((__packed__)); + +/* + * Deregister Port Attributes (DPA) + */ +struct fc_fdmi_dpa { + struct fc_fdmi_port_name port; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Deregister HBA Attributes (DHAT) + */ +struct fc_fdmi_dhat { + struct fc_fdmi_hba_identifier hbaid; +} __attribute__((__packed__)); + +/* + * Deregister HBA (DHBA) + */ +struct fc_fdmi_dhba { + struct fc_fdmi_hba_identifier hbaid; +} __attribute__((__packed__)); + +#endif /* _FC_MS_H_ */ diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h index be418d8448a5..35fd4744f3e9 100644 --- a/include/scsi/fc_encode.h +++ b/include/scsi/fc_encode.h @@ -20,6 +20,7 @@ #ifndef _FC_ENCODE_H_ #define _FC_ENCODE_H_ #include <asm/unaligned.h> +#include <linux/utsname.h> /* * F_CTL values for simple requests and responses. @@ -43,6 +44,10 @@ struct fc_ct_req { struct fc_ns_fid fid; struct fc_ns_rsnn snn; struct fc_ns_rspn spn; + struct fc_fdmi_rhba rhba; + struct fc_fdmi_rpa rpa; + struct fc_fdmi_dprt dprt; + struct fc_fdmi_dhba dhba; } payload; }; @@ -97,7 +102,9 @@ static inline void fc_adisc_fill(struct fc_lport *lport, struct fc_frame *fp) * returns pointer to ct request. */ static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp, - unsigned int op, size_t req_size) + unsigned int op, size_t req_size, + enum fc_ct_fs_type fs_type, + u8 subtype) { struct fc_ct_req *ct; size_t ct_plen; @@ -106,14 +113,14 @@ static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp, ct = fc_frame_payload_get(fp, ct_plen); memset(ct, 0, ct_plen); ct->hdr.ct_rev = FC_CT_REV; - ct->hdr.ct_fs_type = FC_FST_DIR; - ct->hdr.ct_fs_subtype = FC_NS_SUBTYPE; + ct->hdr.ct_fs_type = fs_type; + ct->hdr.ct_fs_subtype = subtype; ct->hdr.ct_cmd = htons((u16) op); return ct; } /** - * fc_ct_fill() - Fill in a name service request frame + * fc_ct_ns_fill() - Fill in a name service request frame * @lport: local port. * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries. * @fp: frame to contain payload. @@ -121,7 +128,7 @@ static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp, * @r_ctl: pointer to FC header R_CTL. * @fh_type: pointer to FC-4 type. */ -static inline int fc_ct_fill(struct fc_lport *lport, +static inline int fc_ct_ns_fill(struct fc_lport *lport, u32 fc_id, struct fc_frame *fp, unsigned int op, enum fc_rctl *r_ctl, enum fc_fh_type *fh_type) @@ -131,23 +138,28 @@ static inline int fc_ct_fill(struct fc_lport *lport, switch (op) { case FC_NS_GPN_FT: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_gid_ft)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_gid_ft), + FC_FST_DIR, FC_NS_SUBTYPE); ct->payload.gid.fn_fc4_type = FC_TYPE_FCP; break; case FC_NS_GPN_ID: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_fid)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_fid), + FC_FST_DIR, FC_NS_SUBTYPE); + ct->payload.gid.fn_fc4_type = FC_TYPE_FCP; hton24(ct->payload.fid.fp_fid, fc_id); break; case FC_NS_RFT_ID: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rft)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rft), + FC_FST_DIR, FC_NS_SUBTYPE); hton24(ct->payload.rft.fid.fp_fid, lport->port_id); ct->payload.rft.fts = lport->fcts; break; case FC_NS_RFF_ID: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rff_id)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rff_id), + FC_FST_DIR, FC_NS_SUBTYPE); hton24(ct->payload.rff.fr_fid.fp_fid, lport->port_id); ct->payload.rff.fr_type = FC_TYPE_FCP; if (lport->service_params & FCP_SPPF_INIT_FCN) @@ -157,14 +169,16 @@ static inline int fc_ct_fill(struct fc_lport *lport, break; case FC_NS_RNN_ID: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id), + FC_FST_DIR, FC_NS_SUBTYPE); hton24(ct->payload.rn.fr_fid.fp_fid, lport->port_id); put_unaligned_be64(lport->wwnn, &ct->payload.rn.fr_wwn); break; case FC_NS_RSPN_ID: len = strnlen(fc_host_symbolic_name(lport->host), 255); - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rspn) + len); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rspn) + len, + FC_FST_DIR, FC_NS_SUBTYPE); hton24(ct->payload.spn.fr_fid.fp_fid, lport->port_id); strncpy(ct->payload.spn.fr_name, fc_host_symbolic_name(lport->host), len); @@ -173,7 +187,8 @@ static inline int fc_ct_fill(struct fc_lport *lport, case FC_NS_RSNN_NN: len = strnlen(fc_host_symbolic_name(lport->host), 255); - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rsnn) + len); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rsnn) + len, + FC_FST_DIR, FC_NS_SUBTYPE); put_unaligned_be64(lport->wwnn, &ct->payload.snn.fr_wwn); strncpy(ct->payload.snn.fr_name, fc_host_symbolic_name(lport->host), len); @@ -189,6 +204,330 @@ static inline int fc_ct_fill(struct fc_lport *lport, } /** + * fc_ct_ms_fill() - Fill in a mgmt service request frame + * @lport: local port. + * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries. + * @fp: frame to contain payload. + * @op: CT opcode. + * @r_ctl: pointer to FC header R_CTL. + * @fh_type: pointer to FC-4 type. + */ +static inline int fc_ct_ms_fill(struct fc_lport *lport, + u32 fc_id, struct fc_frame *fp, + unsigned int op, enum fc_rctl *r_ctl, + enum fc_fh_type *fh_type) +{ + struct fc_ct_req *ct; + size_t len; + struct fc_fdmi_attr_entry *entry; + struct fs_fdmi_attrs *hba_attrs; + int numattrs = 0; + + switch (op) { + case FC_FDMI_RHBA: + numattrs = 10; + len = sizeof(struct fc_fdmi_rhba); + len -= sizeof(struct fc_fdmi_attr_entry); + len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN); + len += FC_FDMI_HBA_ATTR_NODENAME_LEN; + len += FC_FDMI_HBA_ATTR_MANUFACTURER_LEN; + len += FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN; + len += FC_FDMI_HBA_ATTR_MODEL_LEN; + len += FC_FDMI_HBA_ATTR_MODELDESCR_LEN; + len += FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN; + len += FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN; + len += FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN; + len += FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN; + len += FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN; + ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT, + FC_FDMI_SUBTYPE); + + /* HBA Identifier */ + put_unaligned_be64(lport->wwpn, &ct->payload.rhba.hbaid.id); + /* Number of Ports - always 1 */ + put_unaligned_be32(1, &ct->payload.rhba.port.numport); + /* Port Name */ + put_unaligned_be64(lport->wwpn, + &ct->payload.rhba.port.port[0].portname); + + /* HBA Attributes */ + put_unaligned_be32(numattrs, + &ct->payload.rhba.hba_attrs.numattrs); + hba_attrs = &ct->payload.rhba.hba_attrs; + entry = (struct fc_fdmi_attr_entry *)hba_attrs->attr; + /* NodeName*/ + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_NODENAME_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_NODENAME, + &entry->type); + put_unaligned_be16(len, &entry->len); + put_unaligned_be64(lport->wwnn, + (__be64 *)&entry->value[0]); + + /* Manufacturer */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_NODENAME_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_MANUFACTURER_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_MANUFACTURER, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_manufacturer(lport->host), + FC_FDMI_HBA_ATTR_MANUFACTURER_LEN); + + /* SerialNumber */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_MANUFACTURER_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_SERIALNUMBER, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_serial_number(lport->host), + FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN); + + /* Model */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_MODEL_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_MODEL, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_model(lport->host), + FC_FDMI_HBA_ATTR_MODEL_LEN); + + /* Model Description */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_MODEL_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_MODELDESCR_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_MODELDESCRIPTION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_model_description(lport->host), + FC_FDMI_HBA_ATTR_MODELDESCR_LEN); + + /* Hardware Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_MODELDESCR_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_HARDWAREVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_hardware_version(lport->host), + FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN); + + /* Driver Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_DRIVERVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_driver_version(lport->host), + FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN); + + /* OptionROM Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_OPTIONROMVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_optionrom_version(lport->host), + FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN); + + /* Firmware Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_FIRMWAREVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_firmware_version(lport->host), + FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN); + + /* OS Name and Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_OSNAMEVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + snprintf((char *)&entry->value, + FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN, + "%s v%s", + init_utsname()->sysname, + init_utsname()->release); + break; + case FC_FDMI_RPA: + numattrs = 6; + len = sizeof(struct fc_fdmi_rpa); + len -= sizeof(struct fc_fdmi_attr_entry); + len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN); + len += FC_FDMI_PORT_ATTR_FC4TYPES_LEN; + len += FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN; + len += FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN; + len += FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN; + len += FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN; + len += FC_FDMI_PORT_ATTR_HOSTNAME_LEN; + ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT, + FC_FDMI_SUBTYPE); + + /* Port Name */ + put_unaligned_be64(lport->wwpn, + &ct->payload.rpa.port.portname); + + /* Port Attributes */ + put_unaligned_be32(numattrs, + &ct->payload.rpa.hba_attrs.numattrs); + + hba_attrs = &ct->payload.rpa.hba_attrs; + entry = (struct fc_fdmi_attr_entry *)hba_attrs->attr; + + /* FC4 types */ + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_FC4TYPES_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_FC4TYPES, + &entry->type); + put_unaligned_be16(len, &entry->len); + memcpy(&entry->value, fc_host_supported_fc4s(lport->host), + FC_FDMI_PORT_ATTR_FC4TYPES_LEN); + + /* Supported Speed */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_FC4TYPES_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_SUPPORTEDSPEED, + &entry->type); + put_unaligned_be16(len, &entry->len); + + put_unaligned_be32(fc_host_supported_speeds(lport->host), + &entry->value); + + /* Current Port Speed */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_CURRENTPORTSPEED, + &entry->type); + put_unaligned_be16(len, &entry->len); + put_unaligned_be32(lport->link_speed, + &entry->value); + + /* Max Frame Size */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_MAXFRAMESIZE, + &entry->type); + put_unaligned_be16(len, &entry->len); + put_unaligned_be32(fc_host_maxframe_size(lport->host), + &entry->value); + + /* OS Device Name */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_OSDEVICENAME, + &entry->type); + put_unaligned_be16(len, &entry->len); + /* Use the sysfs device name */ + strncpy((char *)&entry->value, + dev_name(&lport->host->shost_gendev), + strnlen(dev_name(&lport->host->shost_gendev), + FC_FDMI_PORT_ATTR_HOSTNAME_LEN)); + + /* Host Name */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_HOSTNAME_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_HOSTNAME, + &entry->type); + put_unaligned_be16(len, &entry->len); + if (strlen(fc_host_system_hostname(lport->host))) + strncpy((char *)&entry->value, + fc_host_system_hostname(lport->host), + strnlen(fc_host_system_hostname(lport->host), + FC_FDMI_PORT_ATTR_HOSTNAME_LEN)); + else + strncpy((char *)&entry->value, + init_utsname()->nodename, + FC_FDMI_PORT_ATTR_HOSTNAME_LEN); + break; + case FC_FDMI_DPRT: + len = sizeof(struct fc_fdmi_dprt); + ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT, + FC_FDMI_SUBTYPE); + /* Port Name */ + put_unaligned_be64(lport->wwpn, + &ct->payload.dprt.port.portname); + break; + case FC_FDMI_DHBA: + len = sizeof(struct fc_fdmi_dhba); + ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT, + FC_FDMI_SUBTYPE); + /* HBA Identifier */ + put_unaligned_be64(lport->wwpn, &ct->payload.dhba.hbaid.id); + break; + default: + return -EINVAL; + } + *r_ctl = FC_RCTL_DD_UNSOL_CTL; + *fh_type = FC_TYPE_CT; + return 0; +} + +/** + * fc_ct_fill() - Fill in a common transport service request frame + * @lport: local port. + * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries. + * @fp: frame to contain payload. + * @op: CT opcode. + * @r_ctl: pointer to FC header R_CTL. + * @fh_type: pointer to FC-4 type. + */ +static inline int fc_ct_fill(struct fc_lport *lport, + u32 fc_id, struct fc_frame *fp, + unsigned int op, enum fc_rctl *r_ctl, + enum fc_fh_type *fh_type, u32 *did) +{ + int rc = -EINVAL; + + switch (fc_id) { + case FC_FID_MGMT_SERV: + rc = fc_ct_ms_fill(lport, fc_id, fp, op, r_ctl, fh_type); + *did = FC_FID_MGMT_SERV; + break; + case FC_FID_DIR_SERV: + default: + rc = fc_ct_ns_fill(lport, fc_id, fp, op, r_ctl, fh_type); + *did = FC_FID_DIR_SERV; + break; + } + + return rc; +} +/** * fc_plogi_fill - Fill in plogi request frame */ static inline void fc_plogi_fill(struct fc_lport *lport, struct fc_frame *fp, diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 2703e3bedbf5..917741bb8e11 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -60,6 +60,9 @@ enum iscsi_uevent_e { ISCSI_UEVENT_PATH_UPDATE = UEVENT_BASE + 20, ISCSI_UEVENT_SET_IFACE_PARAMS = UEVENT_BASE + 21, + ISCSI_UEVENT_PING = UEVENT_BASE + 22, + ISCSI_UEVENT_GET_CHAP = UEVENT_BASE + 23, + ISCSI_UEVENT_DELETE_CHAP = UEVENT_BASE + 24, /* up events */ ISCSI_KEVENT_RECV_PDU = KEVENT_BASE + 1, @@ -72,6 +75,8 @@ enum iscsi_uevent_e { ISCSI_KEVENT_PATH_REQ = KEVENT_BASE + 7, ISCSI_KEVENT_IF_DOWN = KEVENT_BASE + 8, ISCSI_KEVENT_CONN_LOGIN_STATE = KEVENT_BASE + 9, + ISCSI_KEVENT_HOST_EVENT = KEVENT_BASE + 10, + ISCSI_KEVENT_PING_COMP = KEVENT_BASE + 11, }; enum iscsi_tgt_dscvr { @@ -80,6 +85,13 @@ enum iscsi_tgt_dscvr { ISCSI_TGT_DSCVR_SLP = 3, }; +enum iscsi_host_event_code { + ISCSI_EVENT_LINKUP = 1, + ISCSI_EVENT_LINKDOWN, + /* must always be last */ + ISCSI_EVENT_MAX, +}; + struct iscsi_uevent { uint32_t type; /* k/u events type */ uint32_t iferror; /* carries interface or resource errors */ @@ -178,6 +190,26 @@ struct iscsi_uevent { uint32_t host_no; uint32_t count; } set_iface_params; + struct msg_iscsi_ping { + uint32_t host_no; + uint32_t iface_num; + uint32_t iface_type; + uint32_t payload_size; + uint32_t pid; /* unique ping id associated + with each ping request */ + } iscsi_ping; + struct msg_get_chap { + uint32_t host_no; + uint32_t num_entries; /* number of CHAP entries + * on request, number of + * valid CHAP entries on + * response */ + uint16_t chap_tbl_idx; + } get_chap; + struct msg_delete_chap { + uint32_t host_no; + uint16_t chap_tbl_idx; + } delete_chap; } u; union { /* messages k -> u */ @@ -222,6 +254,19 @@ struct iscsi_uevent { struct msg_notify_if_down { uint32_t host_no; } notify_if_down; + struct msg_host_event { + uint32_t host_no; + uint32_t data_size; + enum iscsi_host_event_code code; + } host_event; + struct msg_ping_comp { + uint32_t host_no; + uint32_t status; /* enum + * iscsi_ping_status_code */ + uint32_t pid; /* unique ping id associated + with each ping request */ + uint32_t data_size; + } ping_comp; } r; } __attribute__ ((aligned (sizeof(uint64_t)))); @@ -406,6 +451,9 @@ enum iscsi_param { ISCSI_PARAM_TGT_RESET_TMO, ISCSI_PARAM_TARGET_ALIAS, + + ISCSI_PARAM_CHAP_IN_IDX, + ISCSI_PARAM_CHAP_OUT_IDX, /* must always be last */ ISCSI_PARAM_MAX, }; @@ -416,9 +464,40 @@ enum iscsi_host_param { ISCSI_HOST_PARAM_INITIATOR_NAME, ISCSI_HOST_PARAM_NETDEV_NAME, ISCSI_HOST_PARAM_IPADDRESS, + ISCSI_HOST_PARAM_PORT_STATE, + ISCSI_HOST_PARAM_PORT_SPEED, ISCSI_HOST_PARAM_MAX, }; +/* iSCSI port Speed */ +enum iscsi_port_speed { + ISCSI_PORT_SPEED_UNKNOWN = 0x1, + ISCSI_PORT_SPEED_10MBPS = 0x2, + ISCSI_PORT_SPEED_100MBPS = 0x4, + ISCSI_PORT_SPEED_1GBPS = 0x8, + ISCSI_PORT_SPEED_10GBPS = 0x10, +}; + +/* iSCSI port state */ +enum iscsi_port_state { + ISCSI_PORT_STATE_DOWN = 0x1, + ISCSI_PORT_STATE_UP = 0x2, +}; + +/* iSCSI PING status/error code */ +enum iscsi_ping_status_code { + ISCSI_PING_SUCCESS = 0, + ISCSI_PING_FW_DISABLED = 0x1, + ISCSI_PING_IPADDR_INVALID = 0x2, + ISCSI_PING_LINKLOCAL_IPV6_ADDR_INVALID = 0x3, + ISCSI_PING_TIMEOUT = 0x4, + ISCSI_PING_INVALID_DEST_ADDR = 0x5, + ISCSI_PING_OVERSIZE_PACKET = 0x6, + ISCSI_PING_ICMP_ERROR = 0x7, + ISCSI_PING_MAX_REQ_EXCEEDED = 0x8, + ISCSI_PING_NO_ARP_RECEIVED = 0x9, +}; + #define iscsi_ptr(_handle) ((void*)(unsigned long)_handle) #define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr) @@ -501,4 +580,19 @@ struct iscsi_stats { __attribute__ ((aligned (sizeof(uint64_t)))); }; +enum chap_type_e { + CHAP_TYPE_OUT, + CHAP_TYPE_IN, +}; + +#define ISCSI_CHAP_AUTH_NAME_MAX_LEN 256 +#define ISCSI_CHAP_AUTH_SECRET_MAX_LEN 256 +struct iscsi_chap_rec { + uint16_t chap_tbl_idx; + enum chap_type_e chap_type; + char username[ISCSI_CHAP_AUTH_NAME_MAX_LEN]; + uint8_t password[ISCSI_CHAP_AUTH_SECRET_MAX_LEN]; + uint8_t password_length; +}; + #endif diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 6a3922fe0be0..8f9dfba3fcf0 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -30,6 +30,7 @@ #include <scsi/fc/fc_fcp.h> #include <scsi/fc/fc_ns.h> +#include <scsi/fc/fc_ms.h> #include <scsi/fc/fc_els.h> #include <scsi/fc/fc_gs.h> @@ -52,6 +53,8 @@ * @LPORT_ST_RPN_ID: Register port name by ID (RPN_ID) sent * @LPORT_ST_RFT_ID: Register Fibre Channel types by ID (RFT_ID) sent * @LPORT_ST_RFF_ID: Register FC-4 Features by ID (RFF_ID) sent + * @LPORT_ST_FDMI: Waiting for mgmt server rport to become ready + * @LPORT_ST_RHBA: * @LPORT_ST_SCR: State Change Register (SCR) sent * @LPORT_ST_READY: Ready for use * @LPORT_ST_LOGO: Local port logout (LOGO) sent @@ -66,6 +69,11 @@ enum fc_lport_state { LPORT_ST_RSPN_ID, LPORT_ST_RFT_ID, LPORT_ST_RFF_ID, + LPORT_ST_FDMI, + LPORT_ST_RHBA, + LPORT_ST_RPA, + LPORT_ST_DHBA, + LPORT_ST_DPRT, LPORT_ST_SCR, LPORT_ST_READY, LPORT_ST_LOGO, @@ -797,6 +805,7 @@ enum fc_lport_event { * @host: The SCSI host associated with a local port * @ema_list: Exchange manager anchor list * @dns_rdata: The directory server remote port + * @ms_rdata: The management server remote port * @ptp_rdata: Point to point remote port * @scsi_priv: FCP layer internal data * @disc: Discovery context @@ -842,6 +851,7 @@ struct fc_lport { struct Scsi_Host *host; struct list_head ema_list; struct fc_rport_priv *dns_rdata; + struct fc_rport_priv *ms_rdata; struct fc_rport_priv *ptp_rdata; void *scsi_priv; struct fc_disc disc; @@ -877,6 +887,7 @@ struct fc_lport { u32 does_npiv:1; u32 npiv_enabled:1; u32 point_to_multipoint:1; + u32 fdmi_enabled:1; u32 mfs; u8 max_retry_count; u8 max_rport_retry_count; diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index 5a35a2a2d3c5..cfdb55f0937e 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -165,7 +165,8 @@ struct fcoe_ctlr { * @switch_name: WWN of switch from advertisement * @fabric_name: WWN of fabric from advertisement * @fc_map: FC_MAP value from advertisement - * @fcf_mac: Ethernet address of the FCF + * @fcf_mac: Ethernet address of the FCF for FIP traffic + * @fcoe_mac: Ethernet address of the FCF for FCoE traffic * @vfid: virtual fabric ID * @pri: selection priority, smaller values are better * @flogi_sent: current FLOGI sent to this FCF @@ -188,6 +189,7 @@ struct fcoe_fcf { u32 fc_map; u16 vfid; u8 fcf_mac[ETH_ALEN]; + u8 fcoe_mac[ETH_ALEN]; u8 pri; u8 flogi_sent; diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index cedcff371c88..6e33386a3898 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -268,7 +268,7 @@ struct iscsi_session { int lu_reset_timeout; int tgt_reset_timeout; int initial_r2t_en; - unsigned max_r2t; + unsigned short max_r2t; int imm_data_en; unsigned first_burst; unsigned max_burst; @@ -284,6 +284,7 @@ struct iscsi_session { char *password; char *password_in; char *targetname; + char *targetalias; char *ifacename; char *initiatorname; /* control data */ diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h index ac0cc1d925ef..215469a9b801 100644 --- a/include/scsi/libiscsi_tcp.h +++ b/include/scsi/libiscsi_tcp.h @@ -128,7 +128,7 @@ extern void iscsi_tcp_conn_teardown(struct iscsi_cls_conn *cls_conn); /* misc helpers */ extern int iscsi_tcp_r2tpool_alloc(struct iscsi_session *session); extern void iscsi_tcp_r2tpool_free(struct iscsi_session *session); - +extern int iscsi_tcp_set_max_r2t(struct iscsi_conn *conn, char *buf); extern void iscsi_tcp_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *stats); #endif /* LIBISCSI_TCP_H */ diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 6a308d42d98f..5f5ed1b8b41b 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -86,7 +86,9 @@ enum discover_event { DISCE_DISCOVER_DOMAIN = 0U, DISCE_REVALIDATE_DOMAIN = 1, DISCE_PORT_GONE = 2, - DISC_NUM_EVENTS = 3, + DISCE_PROBE = 3, + DISCE_DESTRUCT = 4, + DISC_NUM_EVENTS = 5, }; /* ---------- Expander Devices ---------- */ @@ -151,6 +153,8 @@ struct expander_device { struct ex_phy *ex_phy; struct sas_port *parent_port; + + struct mutex cmd_mutex; }; /* ---------- SATA device ---------- */ @@ -162,22 +166,21 @@ enum ata_command_set { struct sata_device { enum ata_command_set command_set; struct smp_resp rps_resp; /* report_phy_sata_resp */ - __le16 *identify_device; - __le16 *identify_packet_device; - u8 port_no; /* port number, if this is a PM (Port) */ struct list_head children; /* PM Ports if this is a PM */ struct ata_port *ap; struct ata_host ata_host; struct ata_taskfile tf; - u32 sstatus; - u32 serror; - u32 scontrol; }; -/* ---------- Domain device ---------- */ +enum { + SAS_DEV_GONE, + SAS_DEV_DESTROY, +}; + struct domain_device { + spinlock_t done_lock; enum sas_dev_type dev_type; enum sas_linkrate linkrate; @@ -189,8 +192,10 @@ struct domain_device { struct domain_device *parent; struct list_head siblings; /* devices on the same level */ struct asd_sas_port *port; /* shortcut to root of the tree */ + struct sas_phy *phy; struct list_head dev_list_node; + struct list_head disco_list_node; /* awaiting probe or destruct */ enum sas_protocol iproto; enum sas_protocol tproto; @@ -208,7 +213,8 @@ struct domain_device { }; void *lldd_dev; - int gone; + unsigned long state; + struct kref kref; }; struct sas_discovery_event { @@ -217,7 +223,6 @@ struct sas_discovery_event { }; struct sas_discovery { - spinlock_t disc_event_lock; struct sas_discovery_event disc_work[DISC_NUM_EVENTS]; unsigned long pending; u8 fanout_sas_addr[8]; @@ -226,7 +231,6 @@ struct sas_discovery { int max_level; }; - /* The port struct is Class:RW, driver:RO */ struct asd_sas_port { /* private: */ @@ -236,9 +240,10 @@ struct asd_sas_port { struct domain_device *port_dev; spinlock_t dev_list_lock; struct list_head dev_list; + struct list_head disco_list; + struct list_head destroy_list; enum sas_linkrate linkrate; - struct sas_phy *phy; struct work_struct work; /* public: */ @@ -274,7 +279,6 @@ struct asd_sas_event { */ struct asd_sas_phy { /* private: */ - /* protected by ha->event_lock */ struct asd_sas_event port_events[PORT_NUM_EVENTS]; struct asd_sas_event phy_events[PHY_NUM_EVENTS]; @@ -320,6 +324,7 @@ struct asd_sas_phy { struct scsi_core { struct Scsi_Host *shost; + struct mutex task_queue_flush; spinlock_t task_queue_lock; struct list_head task_queue; int task_queue_size; @@ -334,18 +339,23 @@ struct sas_ha_event { enum sas_ha_state { SAS_HA_REGISTERED, - SAS_HA_UNREGISTERED + SAS_HA_DRAINING, + SAS_HA_ATA_EH_ACTIVE, + SAS_HA_FROZEN, }; struct sas_ha_struct { /* private: */ - spinlock_t event_lock; struct sas_ha_event ha_events[HA_NUM_EVENTS]; unsigned long pending; - enum sas_ha_state state; + struct list_head defer_q; /* work queued while draining */ + struct mutex drain_mutex; + unsigned long state; spinlock_t state_lock; + struct mutex disco_mutex; + struct scsi_core core; /* public: */ @@ -374,7 +384,8 @@ struct sas_ha_struct { void *lldd_ha; /* not touched by sas class code */ - struct list_head eh_done_q; + struct list_head eh_done_q; /* complete via scsi_eh_flush_done_q */ + struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */ }; #define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata) @@ -418,6 +429,11 @@ static inline unsigned int to_sas_gpio_od(int device, int bit) return 3 * device + bit; } +static inline void sas_put_local_phy(struct sas_phy *phy) +{ + put_device(&phy->dev); +} + #ifdef CONFIG_SCSI_SAS_HOST_SMP int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count); #else @@ -447,7 +463,10 @@ enum service_response { }; enum exec_status { - /* The SAM_STAT_.. codes fit in the lower 6 bits */ + /* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of + * them here to silence 'case value not in enumerated type' warnings + */ + __SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION, SAS_DEV_NO_RESPONSE = 0x80, SAS_DATA_UNDERRUN, @@ -487,10 +506,6 @@ enum exec_status { struct ata_task_resp { u16 frame_len; u8 ending_fis[24]; /* dev to host or data-in */ - u32 sstatus; - u32 serror; - u32 scontrol; - u32 sactive; }; #define SAS_STATUS_BUF_SIZE 96 @@ -604,7 +619,8 @@ struct sas_domain_function_template { int (*lldd_clear_aca)(struct domain_device *, u8 *lun); int (*lldd_clear_task_set)(struct domain_device *, u8 *lun); int (*lldd_I_T_nexus_reset)(struct domain_device *); - int (*lldd_ata_soft_reset)(struct domain_device *); + int (*lldd_ata_check_ready)(struct domain_device *); + void (*lldd_ata_set_dmamode)(struct domain_device *); int (*lldd_lu_reset)(struct domain_device *, u8 *lun); int (*lldd_query_task)(struct sas_task *); @@ -625,14 +641,11 @@ extern int sas_unregister_ha(struct sas_ha_struct *); int sas_set_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates); -int sas_phy_enable(struct sas_phy *phy, int enabled); int sas_phy_reset(struct sas_phy *phy, int hard_reset); int sas_queue_up(struct sas_task *task); extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *); extern int sas_target_alloc(struct scsi_target *); -extern int sas_slave_alloc(struct scsi_device *); extern int sas_slave_configure(struct scsi_device *); -extern void sas_slave_destroy(struct scsi_device *); extern int sas_change_queue_depth(struct scsi_device *, int new_depth, int reason); extern int sas_change_queue_type(struct scsi_device *, int qt); @@ -649,7 +662,7 @@ void sas_init_ex_attr(void); int sas_ex_revalidate_domain(struct domain_device *); -void sas_unregister_domain_devices(struct asd_sas_port *port); +void sas_unregister_domain_devices(struct asd_sas_port *port, int gone); void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *); int sas_discover_event(struct asd_sas_port *, enum discover_event ev); @@ -661,20 +674,20 @@ void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *); void sas_init_dev(struct domain_device *); void sas_task_abort(struct sas_task *); -int __sas_task_abort(struct sas_task *); int sas_eh_device_reset_handler(struct scsi_cmnd *cmd); int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd); extern void sas_target_destroy(struct scsi_target *); extern int sas_slave_alloc(struct scsi_device *); extern int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg); +extern int sas_drain_work(struct sas_ha_struct *ha); extern int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, struct request *req); extern void sas_ssp_task_response(struct device *dev, struct sas_task *task, struct ssp_response_iu *iu); -struct sas_phy *sas_find_local_phy(struct domain_device *dev); +struct sas_phy *sas_get_local_phy(struct domain_device *dev); int sas_request_addr(struct Scsi_Host *shost, u8 *addr); diff --git a/include/scsi/osd_ore.h b/include/scsi/osd_ore.h index f05fa826f89e..a5f9b960dfc8 100644 --- a/include/scsi/osd_ore.h +++ b/include/scsi/osd_ore.h @@ -26,6 +26,7 @@ #include <scsi/osd_attributes.h> #include <scsi/osd_sec.h> #include <linux/pnfs_osd_xdr.h> +#include <linux/bug.h> struct ore_comp { struct osd_obj_id obj; diff --git a/include/scsi/sas.h b/include/scsi/sas.h index 3673d685e6ad..a577a833603d 100644 --- a/include/scsi/sas.h +++ b/include/scsi/sas.h @@ -89,8 +89,7 @@ enum sas_oob_mode { SAS_OOB_MODE }; -/* See sas_discover.c if you plan on changing these. - */ +/* See sas_discover.c if you plan on changing these */ enum sas_dev_type { NO_DEVICE = 0, /* protocol */ SAS_END_DEV = 1, /* protocol */ @@ -100,6 +99,7 @@ enum sas_dev_type { SATA_DEV = 5, SATA_PM = 7, SATA_PM_PORT= 8, + SATA_PENDING = 9, }; enum sas_protocol { diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index 9c159f74c6d0..cdccd2eb7b6c 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -32,19 +32,19 @@ static inline int dev_is_sata(struct domain_device *dev) { - return (dev->rphy->identify.target_port_protocols & SAS_PROTOCOL_SATA); + return dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM || + dev->dev_type == SATA_PM_PORT || dev->dev_type == SATA_PENDING; } -int sas_ata_init_host_and_port(struct domain_device *found_dev, - struct scsi_target *starget); - +int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy); +int sas_ata_init_host_and_port(struct domain_device *found_dev); void sas_ata_task_abort(struct sas_task *task); void sas_ata_strategy_handler(struct Scsi_Host *shost); -int sas_ata_timed_out(struct scsi_cmnd *cmd, struct sas_task *task, - enum blk_eh_timer_return *rtn); -int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, - struct list_head *done_q); - +void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, + struct list_head *done_q); +void sas_ata_schedule_reset(struct domain_device *dev); +void sas_ata_wait_eh(struct domain_device *dev); +void sas_probe_sata(struct asd_sas_port *port); #else @@ -52,8 +52,7 @@ static inline int dev_is_sata(struct domain_device *dev) { return 0; } -static inline int sas_ata_init_host_and_port(struct domain_device *found_dev, - struct scsi_target *starget) +static inline int sas_ata_init_host_and_port(struct domain_device *found_dev) { return 0; } @@ -65,18 +64,27 @@ static inline void sas_ata_strategy_handler(struct Scsi_Host *shost) { } -static inline int sas_ata_timed_out(struct scsi_cmnd *cmd, - struct sas_task *task, - enum blk_eh_timer_return *rtn) +static inline void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, + struct list_head *done_q) { - return 0; } -static inline int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, - struct list_head *done_q) + +static inline void sas_ata_schedule_reset(struct domain_device *dev) +{ +} + +static inline void sas_ata_wait_eh(struct domain_device *dev) +{ +} + +static inline void sas_probe_sata(struct asd_sas_port *port) { - return 0; } +static inline int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) +{ + return 0; +} #endif #endif /* _SAS_ATA_H_ */ diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 8001ae4cd7ba..f34a5a87af38 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -143,6 +143,7 @@ struct scsi_cmnd; #define READ_ATTRIBUTE 0x8c #define WRITE_ATTRIBUTE 0x8d #define VERIFY_16 0x8f +#define SYNCHRONIZE_CACHE_16 0x91 #define WRITE_SAME_16 0x93 #define SERVICE_ACTION_IN 0x9e /* values for service action in */ diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index a5e885a111df..377df4a28512 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -10,6 +10,7 @@ struct Scsi_Host; struct scsi_device; +struct scsi_driver; /* * MAX_COMMAND_SIZE is: @@ -131,6 +132,11 @@ struct scsi_cmnd { unsigned char tag; /* SCSI-II queued command tag */ }; +static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) +{ + return *(struct scsi_driver **)cmd->request->rq_disk->private_data; +} + extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); extern struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *, gfp_t); extern void scsi_put_command(struct scsi_cmnd *); @@ -289,17 +295,17 @@ static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) { - cmd->result |= status << 8; + cmd->result = (cmd->result & 0xffff00ff) | (status << 8); } static inline void set_host_byte(struct scsi_cmnd *cmd, char status) { - cmd->result |= status << 16; + cmd->result = (cmd->result & 0xff00ffff) | (status << 16); } static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) { - cmd->result |= status << 24; + cmd->result = (cmd->result & 0x00ffffff) | (status << 24); } #endif /* _SCSI_SCSI_CMND_H */ diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index b3a1c2daf6cc..6efb2e1416e0 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -1,7 +1,6 @@ #ifndef _SCSI_SCSI_DEVICE_H #define _SCSI_SCSI_DEVICE_H -#include <linux/device.h> #include <linux/list.h> #include <linux/spinlock.h> #include <linux/workqueue.h> @@ -9,6 +8,7 @@ #include <scsi/scsi.h> #include <linux/atomic.h> +struct device; struct request_queue; struct scsi_cmnd; struct scsi_lun; diff --git a/include/scsi/scsi_driver.h b/include/scsi/scsi_driver.h index 9fd6702f02e2..d443aa06a722 100644 --- a/include/scsi/scsi_driver.h +++ b/include/scsi/scsi_driver.h @@ -16,6 +16,7 @@ struct scsi_driver { void (*rescan)(struct device *); int (*done)(struct scsi_cmnd *); + int (*eh_action)(struct scsi_cmnd *, unsigned char *, int, int); }; #define to_scsi_driver(drv) \ container_of((drv), struct scsi_driver, gendrv) diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h index 58ce8fe44783..5cb20ccb1956 100644 --- a/include/scsi/scsi_netlink.h +++ b/include/scsi/scsi_netlink.h @@ -23,7 +23,7 @@ #define SCSI_NETLINK_H #include <linux/netlink.h> - +#include <linux/types.h> /* * This file intended to be included by both kernel and user space diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h index 0de32cd4e8a7..af244f4bba53 100644 --- a/include/scsi/scsi_transport.h +++ b/include/scsi/scsi_transport.h @@ -22,6 +22,7 @@ #include <linux/transport_class.h> #include <linux/blkdev.h> +#include <linux/bug.h> #include <scsi/scsi_host.h> #include <scsi/scsi_device.h> diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 2a65167a8f10..719faf1863ad 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -126,8 +126,8 @@ enum fc_vport_state { incapable of reporting */ #define FC_PORTSPEED_1GBIT 1 #define FC_PORTSPEED_2GBIT 2 -#define FC_PORTSPEED_4GBIT 4 -#define FC_PORTSPEED_10GBIT 8 +#define FC_PORTSPEED_10GBIT 4 +#define FC_PORTSPEED_4GBIT 8 #define FC_PORTSPEED_8GBIT 0x10 #define FC_PORTSPEED_16GBIT 0x20 #define FC_PORTSPEED_NOT_NEGOTIATED (1 << 15) /* Speed not established */ @@ -486,6 +486,13 @@ struct fc_host_attrs { u32 maxframe_size; u16 max_npiv_vports; char serial_number[FC_SERIAL_NUMBER_SIZE]; + char manufacturer[FC_SERIAL_NUMBER_SIZE]; + char model[FC_SYMBOLIC_NAME_SIZE]; + char model_description[FC_SYMBOLIC_NAME_SIZE]; + char hardware_version[FC_VERSION_STRING_SIZE]; + char driver_version[FC_VERSION_STRING_SIZE]; + char firmware_version[FC_VERSION_STRING_SIZE]; + char optionrom_version[FC_VERSION_STRING_SIZE]; /* Dynamic Attributes */ u32 port_id; @@ -541,6 +548,20 @@ struct fc_host_attrs { (((struct fc_host_attrs *)(x)->shost_data)->max_npiv_vports) #define fc_host_serial_number(x) \ (((struct fc_host_attrs *)(x)->shost_data)->serial_number) +#define fc_host_manufacturer(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->manufacturer) +#define fc_host_model(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->model) +#define fc_host_model_description(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->model_description) +#define fc_host_hardware_version(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->hardware_version) +#define fc_host_driver_version(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->driver_version) +#define fc_host_firmware_version(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->firmware_version) +#define fc_host_optionrom_version(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->optionrom_version) #define fc_host_port_id(x) \ (((struct fc_host_attrs *)(x)->shost_data)->port_id) #define fc_host_port_type(x) \ @@ -700,6 +721,13 @@ struct fc_function_template { unsigned long show_host_supported_speeds:1; unsigned long show_host_maxframe_size:1; unsigned long show_host_serial_number:1; + unsigned long show_host_manufacturer:1; + unsigned long show_host_model:1; + unsigned long show_host_model_description:1; + unsigned long show_host_hardware_version:1; + unsigned long show_host_driver_version:1; + unsigned long show_host_firmware_version:1; + unsigned long show_host_optionrom_version:1; /* host dynamic attributes */ unsigned long show_host_port_id:1; unsigned long show_host_port_type:1; diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 2c3a46d102fd..53f0b361d668 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -144,6 +144,12 @@ struct iscsi_transport { int param, char *buf); umode_t (*attr_is_visible)(int param_type, int param); int (*bsg_request)(struct bsg_job *job); + int (*send_ping) (struct Scsi_Host *shost, uint32_t iface_num, + uint32_t iface_type, uint32_t payload_size, + uint32_t pid, struct sockaddr *dst_addr); + int (*get_chap) (struct Scsi_Host *shost, uint16_t chap_tbl_idx, + uint32_t *num_entries, char *buf); + int (*delete_chap) (struct Scsi_Host *shost, uint16_t chap_tbl_idx); }; /* @@ -166,6 +172,17 @@ extern int iscsi_offload_mesg(struct Scsi_Host *shost, struct iscsi_transport *transport, uint32_t type, char *data, uint16_t data_size); +extern void iscsi_post_host_event(uint32_t host_no, + struct iscsi_transport *transport, + enum iscsi_host_event_code code, + uint32_t data_size, + uint8_t *data); + +extern void iscsi_ping_comp_event(uint32_t host_no, + struct iscsi_transport *transport, + uint32_t status, uint32_t pid, + uint32_t data_size, uint8_t *data); + struct iscsi_cls_conn { struct list_head conn_list; /* item in connlist */ void *dd_data; /* LLD private data */ @@ -238,6 +255,8 @@ struct iscsi_cls_host { atomic_t nr_scans; struct mutex mutex; struct request_queue *bsg_q; + uint32_t port_speed; + uint32_t port_state; }; #define iscsi_job_to_shost(_job) \ @@ -307,5 +326,8 @@ extern struct iscsi_iface *iscsi_create_iface(struct Scsi_Host *shost, uint32_t iface_num, int dd_size); extern void iscsi_destroy_iface(struct iscsi_iface *iface); extern struct iscsi_iface *iscsi_lookup_iface(int handle); +extern char *iscsi_get_port_speed_name(struct Scsi_Host *shost); +extern char *iscsi_get_port_state_name(struct Scsi_Host *shost); +extern int iscsi_is_session_dev(const struct device *dev); #endif diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index ffeebc34a4f7..98b3a20a0102 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -75,7 +75,8 @@ struct sas_phy { /* for the list of phys belonging to a port */ struct list_head port_siblings; - struct work_struct reset_work; + /* available to the lldd */ + void *hostdata; }; #define dev_to_phy(d) \ @@ -169,6 +170,8 @@ struct sas_function_template { int (*get_bay_identifier)(struct sas_rphy *); int (*phy_reset)(struct sas_phy *, int); int (*phy_enable)(struct sas_phy *, int); + int (*phy_setup)(struct sas_phy *); + void (*phy_release)(struct sas_phy *); int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *); int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *); }; @@ -194,6 +197,7 @@ void sas_rphy_free(struct sas_rphy *); extern int sas_rphy_add(struct sas_rphy *); extern void sas_rphy_remove(struct sas_rphy *); extern void sas_rphy_delete(struct sas_rphy *); +extern void sas_rphy_unlink(struct sas_rphy *); extern int scsi_is_sas_rphy(const struct device *); struct sas_port *sas_port_alloc(struct device *, int); @@ -205,6 +209,12 @@ void sas_port_add_phy(struct sas_port *, struct sas_phy *); void sas_port_delete_phy(struct sas_port *, struct sas_phy *); void sas_port_mark_backlink(struct sas_port *); int scsi_is_sas_port(const struct device *); +struct sas_phy *sas_port_get_phy(struct sas_port *port); +static inline void sas_port_put_phy(struct sas_phy *phy) +{ + if (phy) + put_device(&phy->dev); +} extern struct scsi_transport_template * sas_attach_transport(struct sas_function_template *); diff --git a/include/sound/compress_params.h b/include/sound/compress_params.h index d97d69f81a7d..da4a456de032 100644 --- a/include/sound/compress_params.h +++ b/include/sound/compress_params.h @@ -51,6 +51,8 @@ #ifndef __SND_COMPRESS_PARAMS_H #define __SND_COMPRESS_PARAMS_H +#include <linux/types.h> + /* AUDIO CODECS SUPPORTED */ #define MAX_NUM_CODECS 32 #define MAX_NUM_CODEC_DESCRIPTORS 32 diff --git a/include/sound/control.h b/include/sound/control.h index b2796e83c7ac..8332e865c759 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -40,7 +40,7 @@ struct snd_kcontrol_new { snd_ctl_elem_iface_t iface; /* interface identifier */ unsigned int device; /* device/client number */ unsigned int subdevice; /* subdevice (substream) number */ - unsigned char *name; /* ASCII name of item */ + const unsigned char *name; /* ASCII name of item */ unsigned int index; /* index of item */ unsigned int access; /* access rights */ unsigned int count; /* count of same elements */ @@ -227,6 +227,11 @@ snd_ctl_add_slave_uncached(struct snd_kcontrol *master, return _snd_ctl_add_slave(master, slave, SND_CTL_SLAVE_NEED_UPDATE); } +int snd_ctl_add_vmaster_hook(struct snd_kcontrol *kctl, + void (*hook)(void *private_data, int), + void *private_data); +void snd_ctl_sync_vmaster_hook(struct snd_kcontrol *kctl); + /* * Helper functions for jack-detection controls */ diff --git a/include/sound/core.h b/include/sound/core.h index cea1b5426dfa..b6e0f57d451d 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -26,7 +26,6 @@ #include <linux/mutex.h> /* struct mutex */ #include <linux/rwsem.h> /* struct rw_semaphore */ #include <linux/pm.h> /* pm_message_t */ -#include <linux/device.h> #include <linux/stringify.h> /* number of supported soundcards */ @@ -39,10 +38,10 @@ #define CONFIG_SND_MAJOR 116 /* standard configuration */ /* forward declarations */ -#ifdef CONFIG_PCI struct pci_dev; -#endif struct module; +struct device; +struct device_attribute; /* device allocation stuff */ diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h new file mode 100644 index 000000000000..a8fcaa6d531f --- /dev/null +++ b/include/sound/dmaengine_pcm.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2012, Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#ifndef __SOUND_DMAENGINE_PCM_H__ +#define __SOUND_DMAENGINE_PCM_H__ + +#include <sound/pcm.h> +#include <linux/dmaengine.h> + +/** + * snd_pcm_substream_to_dma_direction - Get dma_transfer_direction for a PCM + * substream + * @substream: PCM substream + */ +static inline enum dma_transfer_direction +snd_pcm_substream_to_dma_direction(const struct snd_pcm_substream *substream) +{ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + return DMA_MEM_TO_DEV; + else + return DMA_DEV_TO_MEM; +} + +void snd_dmaengine_pcm_set_data(struct snd_pcm_substream *substream, void *data); +void *snd_dmaengine_pcm_get_data(struct snd_pcm_substream *substream); + +int snd_hwparams_to_dma_slave_config(const struct snd_pcm_substream *substream, + const struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config); +int snd_dmaengine_pcm_trigger(struct snd_pcm_substream *substream, int cmd); +snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream); + +int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream, + dma_filter_fn filter_fn, void *filter_data); +int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream); + +struct dma_chan *snd_dmaengine_pcm_get_chan(struct snd_pcm_substream *substream); + +#endif diff --git a/include/sound/jack.h b/include/sound/jack.h index 63c790742db4..58916573db58 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -53,6 +53,9 @@ enum snd_jack_types { SND_JACK_BTN_5 = 0x0200, }; +/* Keep in sync with definitions above */ +#define SND_JACK_SWITCH_TYPES 6 + struct snd_jack { struct input_dev *input_dev; int registered; diff --git a/include/sound/max9768.h b/include/sound/max9768.h new file mode 100644 index 000000000000..0f78b41d030e --- /dev/null +++ b/include/sound/max9768.h @@ -0,0 +1,24 @@ +/* + * Platform data for MAX9768 + * Copyright (C) 2011, 2012 by Wolfram Sang, Pengutronix e.K. + * same licence as the driver + */ + +#ifndef __SOUND_MAX9768_PDATA_H__ +#define __SOUND_MAX9768_PDATA_H__ + +/** + * struct max9768_pdata - optional platform specific MAX9768 configuration + * @shdn_gpio: GPIO to SHDN pin. If not valid, pin must be hardwired HIGH + * @mute_gpio: GPIO to MUTE pin. If not valid, control for mute won't be added + * @flags: configuration flags, e.g. set classic PWM mode (check datasheet + * regarding "filterless modulation" which is default). + */ +struct max9768_pdata { + int shdn_gpio; + int mute_gpio; + unsigned flags; +#define MAX9768_FLAG_CLASSIC_PWM (1 << 0) +}; + +#endif /* __SOUND_MAX9768_PDATA_H__*/ diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 0cf91b2f08ca..0d1112815be3 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -264,7 +264,7 @@ struct snd_pcm_hw_constraint_ratdens { struct snd_pcm_hw_constraint_list { unsigned int count; - unsigned int *list; + const unsigned int *list; unsigned int mask; }; @@ -454,6 +454,7 @@ struct snd_pcm { void *private_data; void (*private_free) (struct snd_pcm *pcm); struct device *dev; /* actual hw device this belongs to */ + bool internal; /* pcm is for internal use only */ #if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE) struct snd_pcm_oss oss; #endif @@ -475,6 +476,9 @@ extern const struct file_operations snd_pcm_f_ops[2]; int snd_pcm_new(struct snd_card *card, const char *id, int device, int playback_count, int capture_count, struct snd_pcm **rpcm); +int snd_pcm_new_internal(struct snd_card *card, const char *id, int device, + int playback_count, int capture_count, + struct snd_pcm **rpcm); int snd_pcm_new_stream(struct snd_pcm *pcm, int stream, int substream_count); int snd_pcm_notify(struct snd_pcm_notify *notify, int nfree); @@ -781,7 +785,8 @@ void snd_interval_muldivk(const struct snd_interval *a, const struct snd_interva unsigned int k, struct snd_interval *c); void snd_interval_mulkdiv(const struct snd_interval *a, unsigned int k, const struct snd_interval *b, struct snd_interval *c); -int snd_interval_list(struct snd_interval *i, unsigned int count, unsigned int *list, unsigned int mask); +int snd_interval_list(struct snd_interval *i, unsigned int count, + const unsigned int *list, unsigned int mask); int snd_interval_ratnum(struct snd_interval *i, unsigned int rats_count, struct snd_ratnum *rats, unsigned int *nump, unsigned int *denp); diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h index 9b1aacaa82fe..b457e87fbd08 100644 --- a/include/sound/sh_fsi.h +++ b/include/sound/sh_fsi.h @@ -72,10 +72,16 @@ #define SH_FSI_BPFMD_32 (5 << 4) #define SH_FSI_BPFMD_16 (6 << 4) +struct sh_fsi_port_info { + unsigned long flags; + int tx_id; + int rx_id; + int (*set_rate)(struct device *dev, int rate, int enable); +}; + struct sh_fsi_platform_info { - unsigned long porta_flags; - unsigned long portb_flags; - int (*set_rate)(struct device *dev, int is_porta, int rate, int enable); + struct sh_fsi_port_info port_a; + struct sh_fsi_port_info port_b; }; /* diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 2413acc54883..c429f248cf4e 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -17,6 +17,7 @@ #include <linux/list.h> struct snd_pcm_substream; +struct snd_soc_dapm_widget; /* * DAI hardware audio formats. @@ -238,6 +239,9 @@ struct snd_soc_dai { unsigned char pop_wait:1; unsigned char probed:1; + struct snd_soc_dapm_widget *playback_widget; + struct snd_soc_dapm_widget *capture_widget; + /* DAI DMA data */ void *playback_dma_data; void *capture_dma_data; @@ -246,10 +250,9 @@ struct snd_soc_dai { unsigned int rate; /* parent platform/codec */ - union { - struct snd_soc_platform *platform; - struct snd_soc_codec *codec; - }; + struct snd_soc_platform *platform; + struct snd_soc_codec *codec; + struct snd_soc_card *card; struct list_head list; diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index d26a9b784772..8da3c2409060 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -13,10 +13,11 @@ #ifndef __LINUX_SND_SOC_DAPM_H #define __LINUX_SND_SOC_DAPM_H -#include <linux/device.h> #include <linux/types.h> #include <sound/control.h> +struct device; + /* widget has no PM register bit */ #define SND_SOC_NOPM -1 @@ -243,6 +244,10 @@ { .id = snd_soc_dapm_supply, .name = wname, .reg = wreg, \ .shift = wshift, .invert = winvert, .event = wevent, \ .event_flags = wflags} +#define SND_SOC_DAPM_REGULATOR_SUPPLY(wname, wdelay) \ +{ .id = snd_soc_dapm_regulator_supply, .name = wname, \ + .reg = SND_SOC_NOPM, .shift = wdelay, .event = dapm_regulator_event, \ + .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD } /* dapm kcontrol types */ #define SOC_DAPM_SINGLE(xname, reg, shift, max, invert) \ @@ -322,6 +327,8 @@ struct snd_soc_dapm_context; int dapm_reg_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event); +int dapm_regulator_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); /* dapm controls */ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol, @@ -346,11 +353,12 @@ int snd_soc_dapm_get_pin_switch(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *uncontrol); int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *uncontrol); -int snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, - const struct snd_soc_dapm_widget *widget); int snd_soc_dapm_new_controls(struct snd_soc_dapm_context *dapm, const struct snd_soc_dapm_widget *widget, int num); +int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm, + struct snd_soc_dai *dai); +int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card); /* dapm path setup */ int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm); @@ -361,10 +369,16 @@ int snd_soc_dapm_weak_routes(struct snd_soc_dapm_context *dapm, const struct snd_soc_dapm_route *route, int num); /* dapm events */ -int snd_soc_dapm_stream_event(struct snd_soc_pcm_runtime *rtd, - const char *stream, int event); +int snd_soc_dapm_stream_event(struct snd_soc_pcm_runtime *rtd, int stream, + struct snd_soc_dai *dai, int event); void snd_soc_dapm_shutdown(struct snd_soc_card *card); +/* external DAPM widget events */ +int snd_soc_dapm_mixer_update_power(struct snd_soc_dapm_widget *widget, + struct snd_kcontrol *kcontrol, int connect); +int snd_soc_dapm_mux_update_power(struct snd_soc_dapm_widget *widget, + struct snd_kcontrol *kcontrol, int mux, struct soc_enum *e); + /* dapm sys fs - used by the core */ int snd_soc_dapm_sys_add(struct device *dev); void snd_soc_dapm_debugfs_init(struct snd_soc_dapm_context *dapm, @@ -411,9 +425,11 @@ enum snd_soc_dapm_type { snd_soc_dapm_pre, /* machine specific pre widget - exec first */ snd_soc_dapm_post, /* machine specific post widget - exec last */ snd_soc_dapm_supply, /* power/clock supply */ + snd_soc_dapm_regulator_supply, /* external regulator */ snd_soc_dapm_aif_in, /* audio interface input */ snd_soc_dapm_aif_out, /* audio interface output */ snd_soc_dapm_siggen, /* signal generator */ + snd_soc_dapm_dai, /* link to DAI structure */ }; /* @@ -434,8 +450,8 @@ struct snd_soc_dapm_route { /* dapm audio path between two widgets */ struct snd_soc_dapm_path { - char *name; - char *long_name; + const char *name; + const char *long_name; /* source (input) and sink (output) widgets */ struct snd_soc_dapm_widget *source; @@ -458,13 +474,15 @@ struct snd_soc_dapm_path { /* dapm widget */ struct snd_soc_dapm_widget { enum snd_soc_dapm_type id; - char *name; /* widget name */ - char *sname; /* stream name */ + const char *name; /* widget name */ + const char *sname; /* stream name */ struct snd_soc_codec *codec; struct snd_soc_platform *platform; struct list_head list; struct snd_soc_dapm_context *dapm; + void *priv; /* widget specific data */ + /* dapm control */ short reg; /* negative reg = no direct dapm */ unsigned char shift; /* bits to shift */ diff --git a/include/sound/soc.h b/include/sound/soc.h index 0992dff55959..2ebf7877c148 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -185,6 +185,20 @@ .rreg = xreg_right, .shift = xshift, \ .min = xmin, .max = xmax} } +#define SND_SOC_BYTES(xname, xbase, xregs) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_bytes_info, .get = snd_soc_bytes_get, \ + .put = snd_soc_bytes_put, .private_value = \ + ((unsigned long)&(struct soc_bytes) \ + {.base = xbase, .num_regs = xregs }) } + +#define SND_SOC_BYTES_MASK(xname, xbase, xregs, xmask) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_bytes_info, .get = snd_soc_bytes_get, \ + .put = snd_soc_bytes_put, .private_value = \ + ((unsigned long)&(struct soc_bytes) \ + {.base = xbase, .num_regs = xregs, \ + .mask = xmask }) } /* * Simplified versions of above macros, declaring a struct and calculating @@ -366,12 +380,16 @@ void snd_soc_free_ac97_codec(struct snd_soc_codec *codec); *Controls */ struct snd_kcontrol *snd_soc_cnew(const struct snd_kcontrol_new *_template, - void *data, char *long_name, + void *data, const char *long_name, const char *prefix); -int snd_soc_add_controls(struct snd_soc_codec *codec, +int snd_soc_add_codec_controls(struct snd_soc_codec *codec, const struct snd_kcontrol_new *controls, int num_controls); int snd_soc_add_platform_controls(struct snd_soc_platform *platform, const struct snd_kcontrol_new *controls, int num_controls); +int snd_soc_add_card_controls(struct snd_soc_card *soc_card, + const struct snd_kcontrol_new *controls, int num_controls); +int snd_soc_add_dai_controls(struct snd_soc_dai *dai, + const struct snd_kcontrol_new *controls, int num_controls); int snd_soc_info_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); int snd_soc_info_enum_ext(struct snd_kcontrol *kcontrol, @@ -409,6 +427,13 @@ int snd_soc_get_volsw_2r_sx(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_put_volsw_2r_sx(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); +int snd_soc_bytes_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_bytes_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_bytes_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); + /** * struct snd_soc_reg_access - Describes whether a given register is @@ -505,6 +530,7 @@ struct snd_soc_pcm_stream { unsigned int rate_max; /* max rate */ unsigned int channels_min; /* min channels */ unsigned int channels_max; /* max channels */ + unsigned int sig_bits; /* number of bits of content */ }; /* SoC audio ops */ @@ -559,6 +585,7 @@ struct snd_soc_codec { unsigned int ac97_created:1; /* Codec has been created by SoC */ unsigned int sysfs_registered:1; /* codec has been sysfs registered */ unsigned int cache_init:1; /* codec cache has been initialized */ + unsigned int using_regmap:1; /* using regmap access */ u32 cache_only; /* Suppress writes to hardware */ u32 cache_sync; /* Cache needs to be synced to hardware */ @@ -637,6 +664,8 @@ struct snd_soc_codec_driver { /* codec stream completion event */ int (*stream_event)(struct snd_soc_dapm_context *dapm, int event); + bool ignore_pmdown_time; /* Doesn't benefit from pmdown delay */ + /* probe ordering - for components with runtime dependencies */ int probe_order; int remove_order; @@ -689,6 +718,7 @@ struct snd_soc_platform { int id; struct device *dev; struct snd_soc_platform_driver *driver; + struct mutex mutex; unsigned int suspended:1; /* platform is suspended */ unsigned int probed:1; @@ -698,6 +728,11 @@ struct snd_soc_platform { struct list_head card_list; struct snd_soc_dapm_context dapm; + +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_platform_root; + struct dentry *debugfs_dapm; +#endif }; struct snd_soc_dai_link { @@ -875,6 +910,12 @@ struct soc_mixer_control { unsigned int reg, rreg, shift, rshift, invert; }; +struct soc_bytes { + int base; + int num_regs; + u32 mask; +}; + /* enumerated kcontrol */ struct soc_enum { unsigned short reg; diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h index 726e94742a5c..ec3f910aa40b 100644 --- a/include/sound/tea575x-tuner.h +++ b/include/sound/tea575x-tuner.h @@ -25,6 +25,7 @@ #include <linux/videodev2.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-dev.h> +#include <media/v4l2-device.h> #define TEA575X_FMIF 10700 @@ -42,13 +43,16 @@ struct snd_tea575x_ops { }; struct snd_tea575x { + struct v4l2_device *v4l2_dev; struct video_device vd; /* video device */ + int radio_nr; /* radio_nr */ bool tea5759; /* 5759 chip is present */ + bool cannot_read_data; /* Device cannot read the data pin */ bool mute; /* Device is muted? */ bool stereo; /* receiving stereo */ bool tuned; /* tuned to a station */ unsigned int val; /* hw value */ - unsigned long freq; /* frequency */ + u32 freq; /* frequency */ struct mutex mutex; struct snd_tea575x_ops *ops; void *private_data; diff --git a/include/sound/version.h b/include/sound/version.h index 8fc5321e1ecc..cc75024c1089 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h */ -#define CONFIG_SND_VERSION "1.0.24" +#define CONFIG_SND_VERSION "1.0.25" #define CONFIG_SND_DATE "" diff --git a/include/sound/wm2200.h b/include/sound/wm2200.h new file mode 100644 index 000000000000..79bf55be7ffa --- /dev/null +++ b/include/sound/wm2200.h @@ -0,0 +1,41 @@ +/* + * linux/sound/wm2200.h -- Platform data for WM2200 + * + * Copyright 2012 Wolfson Microelectronics. PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_SND_WM2200_H +#define __LINUX_SND_WM2200_H + +#define WM2200_GPIO_SET 0x10000 + +enum wm2200_in_mode { + WM2200_IN_SE = 0, + WM2200_IN_DIFF = 1, + WM2200_IN_DMIC = 2, +}; + +enum wm2200_dmic_sup { + WM2200_DMIC_SUP_MICVDD = 0, + WM2200_DMIC_SUP_MICBIAS1 = 1, + WM2200_DMIC_SUP_MICBIAS2 = 2, +}; + +struct wm2200_pdata { + int reset; /** GPIO controlling /RESET, if any */ + int ldo_ena; /** GPIO controlling LODENA, if any */ + int irq_flags; + + int gpio_defaults[4]; + + enum wm2200_in_mode in_mode[3]; + enum wm2200_dmic_sup dmic_sup[3]; + + int micbias_cfg[2]; /** Register value to configure MICBIAS */ +}; + +#endif diff --git a/include/sound/wm8962.h b/include/sound/wm8962.h index 1750bed7c2f6..79e6d427b858 100644 --- a/include/sound/wm8962.h +++ b/include/sound/wm8962.h @@ -49,6 +49,12 @@ struct wm8962_pdata { bool irq_active_low; bool spk_mono; /* Speaker outputs tied together as mono */ + + /** + * This flag should be set if one or both IN4 inputs is wired + * in a DC measurement configuration. + */ + bool in4_dc_measure; }; #endif diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h index 444cd6ba0ba7..41199664666b 100644 --- a/include/sound/ymfpci.h +++ b/include/sound/ymfpci.h @@ -366,6 +366,8 @@ struct snd_ymfpci { #ifdef CONFIG_PM u32 *saved_regs; u32 saved_ydsxgr_mode; + u16 saved_dsxg_legacy; + u16 saved_dsxg_elegacy; #endif }; diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h index e5e6ff98f0fa..8c9ff1b14396 100644 --- a/include/target/target_core_backend.h +++ b/include/target/target_core_backend.h @@ -62,4 +62,6 @@ int transport_set_vpd_ident(struct t10_vpd *, unsigned char *); void *transport_kmap_data_sg(struct se_cmd *); void transport_kunmap_data_sg(struct se_cmd *); +void array_free(void *array, int n); + #endif /* TARGET_CORE_BACKEND_H */ diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index dc4e345a0163..aaccc5f5fc9f 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -9,7 +9,7 @@ #include <net/sock.h> #include <net/tcp.h> -#define TARGET_CORE_MOD_VERSION "v4.1.0-rc1-ml" +#define TARGET_CORE_MOD_VERSION "v4.1.0-rc2-ml" #define TARGET_CORE_VERSION TARGET_CORE_MOD_VERSION /* Maximum Number of LUNs per Target Portal Group */ @@ -86,6 +86,8 @@ #define DA_UNMAP_GRANULARITY_DEFAULT 0 /* Default unmap_granularity_alignment */ #define DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT 0 +/* Default max transfer length */ +#define DA_FABRIC_MAX_SECTORS 8192 /* Emulation for Direct Page Out */ #define DA_EMULATE_DPO 0 /* Emulation for Forced Unit Access WRITEs */ @@ -118,9 +120,9 @@ /* Queue Algorithm Modifier default for restricted reordering in control mode page */ #define DA_EMULATE_REST_REORD 0 +#define SE_INQUIRY_BUF 512 #define SE_MODE_PAGE_BUF 512 - /* struct se_hba->hba_flags */ enum hba_flags_table { HBA_FLAGS_INTERNAL_USE = 0x01, @@ -169,7 +171,8 @@ enum se_cmd_flags_table { SCF_EMULATED_TASK_SENSE = 0x00000004, SCF_SCSI_DATA_SG_IO_CDB = 0x00000008, SCF_SCSI_CONTROL_SG_IO_CDB = 0x00000010, - SCF_SCSI_NON_DATA_CDB = 0x00000040, + SCF_SCSI_NON_DATA_CDB = 0x00000020, + SCF_SCSI_TMR_CDB = 0x00000040, SCF_SCSI_CDB_EXCEPTION = 0x00000080, SCF_SCSI_RESERVATION_CONFLICT = 0x00000100, SCF_FUA = 0x00000200, @@ -183,7 +186,8 @@ enum se_cmd_flags_table { SCF_ALUA_NON_OPTIMIZED = 0x00040000, SCF_DELAYED_CMD_FROM_SAM_ATTR = 0x00080000, SCF_UNUSED = 0x00100000, - SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00400000, + SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00200000, + SCF_ACK_KREF = 0x00400000, }; /* struct se_dev_entry->lun_flags and struct se_lun->lun_access */ @@ -474,12 +478,6 @@ struct t10_reservation { struct t10_reservation_ops pr_ops; }; -struct se_queue_req { - int state; - struct se_cmd *cmd; - struct list_head qr_list; -}; - struct se_queue_obj { atomic_t queue_cnt; spinlock_t cmd_queue_lock; @@ -504,6 +502,24 @@ struct se_task { struct completion task_stop_comp; }; +struct se_tmr_req { + /* Task Management function to be performed */ + u8 function; + /* Task Management response to send */ + u8 response; + int call_transport; + /* Reference to ITT that Task Mgmt should be performed */ + u32 ref_task_tag; + /* 64-bit encoded SAM LUN from $FABRIC_MOD TMR header */ + u64 ref_task_lun; + void *fabric_tmr_ptr; + struct se_cmd *task_cmd; + struct se_cmd *ref_cmd; + struct se_device *tmr_dev; + struct se_lun *tmr_lun; + struct list_head tmr_list; +}; + struct se_cmd { /* SAM response code being sent to initiator */ u8 scsi_status; @@ -555,23 +571,23 @@ struct se_cmd { unsigned char *t_task_cdb; unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE]; unsigned long long t_task_lba; - int t_tasks_failed; u32 t_tasks_sg_chained_no; atomic_t t_fe_count; atomic_t t_se_count; atomic_t t_task_cdbs_left; atomic_t t_task_cdbs_ex_left; atomic_t t_task_cdbs_sent; - atomic_t t_transport_aborted; - atomic_t t_transport_active; - atomic_t t_transport_complete; - atomic_t t_transport_queue_active; - atomic_t t_transport_sent; - atomic_t t_transport_stop; - atomic_t transport_dev_active; - atomic_t transport_lun_active; - atomic_t transport_lun_fe_stop; - atomic_t transport_lun_stop; + unsigned int transport_state; +#define CMD_T_ABORTED (1 << 0) +#define CMD_T_ACTIVE (1 << 1) +#define CMD_T_COMPLETE (1 << 2) +#define CMD_T_QUEUED (1 << 3) +#define CMD_T_SENT (1 << 4) +#define CMD_T_STOP (1 << 5) +#define CMD_T_FAILED (1 << 6) +#define CMD_T_LUN_STOP (1 << 7) +#define CMD_T_LUN_FE_STOP (1 << 8) +#define CMD_T_DEV_ACTIVE (1 << 9) spinlock_t t_state_lock; struct completion t_transport_stop_comp; struct completion transport_lun_fe_stop_comp; @@ -592,24 +608,6 @@ struct se_cmd { }; -struct se_tmr_req { - /* Task Management function to be preformed */ - u8 function; - /* Task Management response to send */ - u8 response; - int call_transport; - /* Reference to ITT that Task Mgmt should be preformed */ - u32 ref_task_tag; - /* 64-bit encoded SAM LUN from $FABRIC_MOD TMR header */ - u64 ref_task_lun; - void *fabric_tmr_ptr; - struct se_cmd *task_cmd; - struct se_cmd *ref_cmd; - struct se_device *tmr_dev; - struct se_lun *tmr_lun; - struct list_head tmr_list; -}; - struct se_ua { u8 ua_asc; u8 ua_ascq; @@ -622,6 +620,7 @@ struct se_node_acl { char initiatorname[TRANSPORT_IQN_LEN]; /* Used to signal demo mode created ACL, disabled by default */ bool dynamic_node_acl; + bool acl_stop:1; u32 queue_depth; u32 acl_index; u64 num_cmds; @@ -630,7 +629,7 @@ struct se_node_acl { spinlock_t stats_lock; /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */ atomic_t acl_pr_ref_count; - struct se_dev_entry *device_list; + struct se_dev_entry **device_list; struct se_session *nacl_sess; struct se_portal_group *se_tpg; spinlock_t device_list_lock; @@ -643,6 +642,8 @@ struct se_node_acl { struct config_group *acl_default_groups[5]; struct list_head acl_list; struct list_head acl_sess_list; + struct completion acl_free_comp; + struct kref acl_kref; }; struct se_session { @@ -656,6 +657,7 @@ struct se_session { struct list_head sess_cmd_list; struct list_head sess_wait_list; spinlock_t sess_cmd_lock; + struct kref sess_kref; }; struct se_device; @@ -730,6 +732,7 @@ struct se_dev_attrib { u32 block_size; u32 hw_max_sectors; u32 max_sectors; + u32 fabric_max_sectors; u32 optimal_sectors; u32 hw_queue_depth; u32 queue_depth; @@ -931,7 +934,7 @@ struct se_portal_group { struct list_head se_tpg_node; /* linked list for initiator ACL list */ struct list_head acl_node_list; - struct se_lun *tpg_lun_list; + struct se_lun **tpg_lun_list; struct se_lun tpg_virt_lun0; /* List of TCM sessions associated wth this TPG */ struct list_head tpg_sess_list; diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index d36fad317e78..10c690809601 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -58,9 +58,6 @@ struct target_core_fabric_ops { */ int (*shutdown_session)(struct se_session *); void (*close_session)(struct se_session *); - void (*stop_session)(struct se_session *, int, int); - void (*fall_back_to_erl0)(struct se_session *); - int (*sess_logged_in)(struct se_session *); u32 (*sess_get_index)(struct se_session *); /* * Used only for SCSI fabrics that contain multi-value TransportIDs @@ -78,7 +75,6 @@ struct target_core_fabric_ops { int (*queue_tm_rsp)(struct se_cmd *); u16 (*set_fabric_sense_len)(struct se_cmd *, u32); u16 (*get_fabric_sense_len)(void); - int (*is_state_remove)(struct se_cmd *); /* * fabric module calls for target_core_fabric_configfs.c */ @@ -105,7 +101,10 @@ void __transport_register_session(struct se_portal_group *, struct se_node_acl *, struct se_session *, void *); void transport_register_session(struct se_portal_group *, struct se_node_acl *, struct se_session *, void *); +void target_get_session(struct se_session *); +int target_put_session(struct se_session *); void transport_free_session(struct se_session *); +void target_put_nacl(struct se_node_acl *); void transport_deregister_session_configfs(struct se_session *); void transport_deregister_session(struct se_session *); @@ -116,6 +115,10 @@ int transport_lookup_cmd_lun(struct se_cmd *, u32); int transport_generic_allocate_tasks(struct se_cmd *, unsigned char *); void target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *, unsigned char *, u32, u32, int, int, int); +int target_submit_tmr(struct se_cmd *se_cmd, struct se_session *se_sess, + unsigned char *sense, u32 unpacked_lun, + void *fabric_tmr_ptr, unsigned char tm_type, + gfp_t, unsigned int, int); int transport_handle_cdb_direct(struct se_cmd *); int transport_generic_handle_cdb_map(struct se_cmd *); int transport_generic_handle_data(struct se_cmd *); @@ -139,9 +142,10 @@ void target_wait_for_sess_cmds(struct se_session *, int); int core_alua_check_nonop_delay(struct se_cmd *); -struct se_tmr_req *core_tmr_alloc_req(struct se_cmd *, void *, u8, gfp_t); +int core_tmr_alloc_req(struct se_cmd *, void *, u8, gfp_t); void core_tmr_release_req(struct se_tmr_req *); int transport_generic_handle_tmr(struct se_cmd *); +void transport_generic_request_failure(struct se_cmd *); int transport_lookup_tmr_lun(struct se_cmd *, u32); struct se_node_acl *core_tpg_check_initiator_node_acl(struct se_portal_group *, diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h index 84f3001a568d..91b91e805673 100644 --- a/include/trace/events/btrfs.h +++ b/include/trace/events/btrfs.h @@ -6,6 +6,7 @@ #include <linux/writeback.h> #include <linux/tracepoint.h> +#include <trace/events/gfpflags.h> struct btrfs_root; struct btrfs_fs_info; @@ -862,6 +863,49 @@ TRACE_EVENT(btrfs_setup_cluster, __entry->size, __entry->max_size, __entry->bitmap) ); +struct extent_state; +TRACE_EVENT(alloc_extent_state, + + TP_PROTO(struct extent_state *state, gfp_t mask, unsigned long IP), + + TP_ARGS(state, mask, IP), + + TP_STRUCT__entry( + __field(struct extent_state *, state) + __field(gfp_t, mask) + __field(unsigned long, ip) + ), + + TP_fast_assign( + __entry->state = state, + __entry->mask = mask, + __entry->ip = IP + ), + + TP_printk("state=%p; mask = %s; caller = %pF", __entry->state, + show_gfp_flags(__entry->mask), (void *)__entry->ip) +); + +TRACE_EVENT(free_extent_state, + + TP_PROTO(struct extent_state *state, unsigned long IP), + + TP_ARGS(state, IP), + + TP_STRUCT__entry( + __field(struct extent_state *, state) + __field(unsigned long, ip) + ), + + TP_fast_assign( + __entry->state = state, + __entry->ip = IP + ), + + TP_printk(" state=%p; caller = %pF", __entry->state, + (void *)__entry->ip) +); + #endif /* _TRACE_BTRFS_H */ /* This part must be outside protection */ diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h index 75964412ddbb..127993dbf322 100644 --- a/include/trace/events/jbd2.h +++ b/include/trace/events/jbd2.h @@ -81,6 +81,13 @@ DEFINE_EVENT(jbd2_commit, jbd2_commit_logging, TP_ARGS(journal, commit_transaction) ); +DEFINE_EVENT(jbd2_commit, jbd2_drop_transaction, + + TP_PROTO(journal_t *journal, transaction_t *commit_transaction), + + TP_ARGS(journal, commit_transaction) +); + TRACE_EVENT(jbd2_end_commit, TP_PROTO(journal_t *journal, transaction_t *commit_transaction), @@ -200,7 +207,7 @@ TRACE_EVENT(jbd2_checkpoint_stats, __entry->forced_to_close, __entry->written, __entry->dropped) ); -TRACE_EVENT(jbd2_cleanup_journal_tail, +TRACE_EVENT(jbd2_update_log_tail, TP_PROTO(journal_t *journal, tid_t first_tid, unsigned long block_nr, unsigned long freed), @@ -229,6 +236,26 @@ TRACE_EVENT(jbd2_cleanup_journal_tail, __entry->block_nr, __entry->freed) ); +TRACE_EVENT(jbd2_write_superblock, + + TP_PROTO(journal_t *journal, int write_op), + + TP_ARGS(journal, write_op), + + TP_STRUCT__entry( + __field( dev_t, dev ) + __field( int, write_op ) + ), + + TP_fast_assign( + __entry->dev = journal->j_fs_dev->bd_dev; + __entry->write_op = write_op; + ), + + TP_printk("dev %d,%d write_op %x", MAJOR(__entry->dev), + MINOR(__entry->dev), __entry->write_op) +); + #endif /* _TRACE_JBD2_H */ /* This part must be outside protection */ diff --git a/include/trace/events/regmap.h b/include/trace/events/regmap.h index 12fbf43524e9..41a7dbd570e2 100644 --- a/include/trace/events/regmap.h +++ b/include/trace/events/regmap.h @@ -4,10 +4,10 @@ #if !defined(_TRACE_REGMAP_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_REGMAP_H -#include <linux/device.h> #include <linux/ktime.h> #include <linux/tracepoint.h> +struct device; struct regmap; /* @@ -139,6 +139,42 @@ TRACE_EVENT(regcache_sync, __get_str(type), __get_str(status)) ); +DECLARE_EVENT_CLASS(regmap_bool, + + TP_PROTO(struct device *dev, bool flag), + + TP_ARGS(dev, flag), + + TP_STRUCT__entry( + __string( name, dev_name(dev) ) + __field( int, flag ) + ), + + TP_fast_assign( + __assign_str(name, dev_name(dev)); + __entry->flag = flag; + ), + + TP_printk("%s flag=%d", __get_str(name), + (int)__entry->flag) +); + +DEFINE_EVENT(regmap_bool, regmap_cache_only, + + TP_PROTO(struct device *dev, bool flag), + + TP_ARGS(dev, flag) + +); + +DEFINE_EVENT(regmap_bool, regmap_cache_bypass, + + TP_PROTO(struct device *dev, bool flag), + + TP_ARGS(dev, flag) + +); + #endif /* _TRACE_REGMAP_H */ /* This part must be outside protection */ diff --git a/include/trace/events/rpm.h b/include/trace/events/rpm.h index d62c558bf64b..33f85b68c22c 100644 --- a/include/trace/events/rpm.h +++ b/include/trace/events/rpm.h @@ -7,7 +7,8 @@ #include <linux/ktime.h> #include <linux/tracepoint.h> -#include <linux/device.h> + +struct device; /* * The rpm_internal events are used for tracing some important diff --git a/include/trace/events/sunrpc.h b/include/trace/events/sunrpc.h new file mode 100644 index 000000000000..43be87d5dd58 --- /dev/null +++ b/include/trace/events/sunrpc.h @@ -0,0 +1,177 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM sunrpc + +#if !defined(_TRACE_SUNRPC_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SUNRPC_H + +#include <linux/sunrpc/sched.h> +#include <linux/sunrpc/clnt.h> +#include <linux/tracepoint.h> + +DECLARE_EVENT_CLASS(rpc_task_status, + + TP_PROTO(struct rpc_task *task), + + TP_ARGS(task), + + TP_STRUCT__entry( + __field(const struct rpc_task *, task) + __field(const struct rpc_clnt *, clnt) + __field(int, status) + ), + + TP_fast_assign( + __entry->task = task; + __entry->clnt = task->tk_client; + __entry->status = task->tk_status; + ), + + TP_printk("task:%p@%p, status %d",__entry->task, __entry->clnt, __entry->status) +); + +DEFINE_EVENT(rpc_task_status, rpc_call_status, + TP_PROTO(struct rpc_task *task), + + TP_ARGS(task) +); + +DEFINE_EVENT(rpc_task_status, rpc_bind_status, + TP_PROTO(struct rpc_task *task), + + TP_ARGS(task) +); + +TRACE_EVENT(rpc_connect_status, + TP_PROTO(struct rpc_task *task, int status), + + TP_ARGS(task, status), + + TP_STRUCT__entry( + __field(const struct rpc_task *, task) + __field(const struct rpc_clnt *, clnt) + __field(int, status) + ), + + TP_fast_assign( + __entry->task = task; + __entry->clnt = task->tk_client; + __entry->status = status; + ), + + TP_printk("task:%p@%p, status %d",__entry->task, __entry->clnt, __entry->status) +); + +DECLARE_EVENT_CLASS(rpc_task_running, + + TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const void *action), + + TP_ARGS(clnt, task, action), + + TP_STRUCT__entry( + __field(const struct rpc_clnt *, clnt) + __field(const struct rpc_task *, task) + __field(const void *, action) + __field(unsigned long, runstate) + __field(int, status) + __field(unsigned short, flags) + ), + + TP_fast_assign( + __entry->clnt = clnt; + __entry->task = task; + __entry->action = action; + __entry->runstate = task->tk_runstate; + __entry->status = task->tk_status; + __entry->flags = task->tk_flags; + ), + + TP_printk("task:%p@%p flags=%4.4x state=%4.4lx status=%d action=%pf", + __entry->task, + __entry->clnt, + __entry->flags, + __entry->runstate, + __entry->status, + __entry->action + ) +); + +DEFINE_EVENT(rpc_task_running, rpc_task_begin, + + TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const void *action), + + TP_ARGS(clnt, task, action) + +); + +DEFINE_EVENT(rpc_task_running, rpc_task_run_action, + + TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const void *action), + + TP_ARGS(clnt, task, action) + +); + +DEFINE_EVENT(rpc_task_running, rpc_task_complete, + + TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const void *action), + + TP_ARGS(clnt, task, action) + +); + +DECLARE_EVENT_CLASS(rpc_task_queued, + + TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const struct rpc_wait_queue *q), + + TP_ARGS(clnt, task, q), + + TP_STRUCT__entry( + __field(const struct rpc_clnt *, clnt) + __field(const struct rpc_task *, task) + __field(unsigned long, timeout) + __field(unsigned long, runstate) + __field(int, status) + __field(unsigned short, flags) + __string(q_name, rpc_qname(q)) + ), + + TP_fast_assign( + __entry->clnt = clnt; + __entry->task = task; + __entry->timeout = task->tk_timeout; + __entry->runstate = task->tk_runstate; + __entry->status = task->tk_status; + __entry->flags = task->tk_flags; + __assign_str(q_name, rpc_qname(q)); + ), + + TP_printk("task:%p@%p flags=%4.4x state=%4.4lx status=%d timeout=%lu queue=%s", + __entry->task, + __entry->clnt, + __entry->flags, + __entry->runstate, + __entry->status, + __entry->timeout, + __get_str(q_name) + ) +); + +DEFINE_EVENT(rpc_task_queued, rpc_task_sleep, + + TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const struct rpc_wait_queue *q), + + TP_ARGS(clnt, task, q) + +); + +DEFINE_EVENT(rpc_task_queued, rpc_task_wakeup, + + TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const struct rpc_wait_queue *q), + + TP_ARGS(clnt, task, q) + +); + +#endif /* _TRACE_SUNRPC_H */ + +#include <trace/define_trace.h> diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h index 5973410e8f8c..7b81887b023f 100644 --- a/include/trace/events/writeback.h +++ b/include/trace/events/writeback.h @@ -5,7 +5,6 @@ #define _TRACE_WRITEBACK_H #include <linux/backing-dev.h> -#include <linux/device.h> #include <linux/writeback.h> #define show_inode_state(state) \ diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h new file mode 100644 index 000000000000..8847a9d6dd42 --- /dev/null +++ b/include/video/exynos_dp.h @@ -0,0 +1,131 @@ +/* + * Samsung SoC DP device support + * + * Copyright (C) 2012 Samsung Electronics Co., Ltd. + * Author: Jingoo Han <jg1.han@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _EXYNOS_DP_H +#define _EXYNOS_DP_H + +#define DP_TIMEOUT_LOOP_COUNT 100 +#define MAX_CR_LOOP 5 +#define MAX_EQ_LOOP 4 + +enum link_rate_type { + LINK_RATE_1_62GBPS = 0x06, + LINK_RATE_2_70GBPS = 0x0a +}; + +enum link_lane_count_type { + LANE_COUNT1 = 1, + LANE_COUNT2 = 2, + LANE_COUNT4 = 4 +}; + +enum link_training_state { + START, + CLOCK_RECOVERY, + EQUALIZER_TRAINING, + FINISHED, + FAILED +}; + +enum voltage_swing_level { + VOLTAGE_LEVEL_0, + VOLTAGE_LEVEL_1, + VOLTAGE_LEVEL_2, + VOLTAGE_LEVEL_3, +}; + +enum pre_emphasis_level { + PRE_EMPHASIS_LEVEL_0, + PRE_EMPHASIS_LEVEL_1, + PRE_EMPHASIS_LEVEL_2, + PRE_EMPHASIS_LEVEL_3, +}; + +enum pattern_set { + PRBS7, + D10_2, + TRAINING_PTN1, + TRAINING_PTN2, + DP_NONE +}; + +enum color_space { + COLOR_RGB, + COLOR_YCBCR422, + COLOR_YCBCR444 +}; + +enum color_depth { + COLOR_6, + COLOR_8, + COLOR_10, + COLOR_12 +}; + +enum color_coefficient { + COLOR_YCBCR601, + COLOR_YCBCR709 +}; + +enum dynamic_range { + VESA, + CEA +}; + +enum pll_status { + PLL_UNLOCKED, + PLL_LOCKED +}; + +enum clock_recovery_m_value_type { + CALCULATED_M, + REGISTER_M +}; + +enum video_timing_recognition_type { + VIDEO_TIMING_FROM_CAPTURE, + VIDEO_TIMING_FROM_REGISTER +}; + +enum analog_power_block { + AUX_BLOCK, + CH0_BLOCK, + CH1_BLOCK, + CH2_BLOCK, + CH3_BLOCK, + ANALOG_TOTAL, + POWER_ALL +}; + +struct video_info { + char *name; + + bool h_sync_polarity; + bool v_sync_polarity; + bool interlaced; + + enum color_space color_space; + enum dynamic_range dynamic_range; + enum color_coefficient ycbcr_coeff; + enum color_depth color_depth; + + enum link_rate_type link_rate; + enum link_lane_count_type lane_count; +}; + +struct exynos_dp_platdata { + struct video_info *video_info; + + void (*phy_init)(void); + void (*phy_exit)(void); +}; + +#endif /* _EXYNOS_DP_H */ diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h new file mode 100644 index 000000000000..772c770535f1 --- /dev/null +++ b/include/video/exynos_mipi_dsim.h @@ -0,0 +1,359 @@ +/* include/video/exynos_mipi_dsim.h + * + * Platform data header for Samsung SoC MIPI-DSIM. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd + * + * InKi Dae <inki.dae@samsung.com> + * Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef _EXYNOS_MIPI_DSIM_H +#define _EXYNOS_MIPI_DSIM_H + +#include <linux/device.h> +#include <linux/fb.h> + +#define PANEL_NAME_SIZE (32) + +/* + * Enumerate display interface type. + * + * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO. + * + * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface + * for main display and CPU Interface(same as I80 Interface) for main + * and sub display. + */ +enum mipi_dsim_interface_type { + DSIM_COMMAND, + DSIM_VIDEO +}; + +enum mipi_dsim_virtual_ch_no { + DSIM_VIRTUAL_CH_0, + DSIM_VIRTUAL_CH_1, + DSIM_VIRTUAL_CH_2, + DSIM_VIRTUAL_CH_3 +}; + +enum mipi_dsim_burst_mode_type { + DSIM_NON_BURST_SYNC_EVENT, + DSIM_BURST_SYNC_EVENT, + DSIM_NON_BURST_SYNC_PULSE, + DSIM_BURST, + DSIM_NON_VIDEO_MODE +}; + +enum mipi_dsim_no_of_data_lane { + DSIM_DATA_LANE_1, + DSIM_DATA_LANE_2, + DSIM_DATA_LANE_3, + DSIM_DATA_LANE_4 +}; + +enum mipi_dsim_byte_clk_src { + DSIM_PLL_OUT_DIV8, + DSIM_EXT_CLK_DIV8, + DSIM_EXT_CLK_BYPASS +}; + +enum mipi_dsim_pixel_format { + DSIM_CMD_3BPP, + DSIM_CMD_8BPP, + DSIM_CMD_12BPP, + DSIM_CMD_16BPP, + DSIM_VID_16BPP_565, + DSIM_VID_18BPP_666PACKED, + DSIM_18BPP_666LOOSELYPACKED, + DSIM_24BPP_888 +}; + +/* + * struct mipi_dsim_config - interface for configuring mipi-dsi controller. + * + * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse. + * @eot_disable: enable or disable EoT packet in HS mode. + * @auto_vertical_cnt: specifies auto vertical count mode. + * in Video mode, the vertical line transition uses line counter + * configured by VSA, VBP, and Vertical resolution. + * If this bit is set to '1', the line counter does not use VSA and VBP + * registers.(in command mode, this variable is ignored) + * @hse: set horizontal sync event mode. + * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC + * start packet to MIPI DSI slave at MIPI DSI spec1.1r02. + * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area + * (in mommand mode, this variable is ignored) + * @hfp: specifies HFP disable mode. + * if this variable is set, DSI master ignores HFP area in VIDEO mode. + * (in command mode, this variable is ignored) + * @hbp: specifies HBP disable mode. + * if this variable is set, DSI master ignores HBP area in VIDEO mode. + * (in command mode, this variable is ignored) + * @hsa: specifies HSA disable mode. + * if this variable is set, DSI master ignores HSA area in VIDEO mode. + * (in command mode, this variable is ignored) + * @cma_allow: specifies the number of horizontal lines, where command packet + * transmission is allowed after Stable VFP period. + * @e_interface: specifies interface to be used.(CPU or RGB interface) + * @e_virtual_ch: specifies virtual channel number that main or + * sub diaplsy uses. + * @e_pixel_format: specifies pixel stream format for main or sub display. + * @e_burst_mode: selects Burst mode in Video mode. + * in Non-burst mode, RGB data area is filled with RGB data and NULL + * packets, according to input bandwidth of RGB interface. + * In Burst mode, RGB data area is filled with RGB data only. + * @e_no_data_lane: specifies data lane count to be used by Master. + * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8) + * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported. + * @pll_stable_time: specifies the PLL Timer for stability of the ganerated + * clock(System clock cycle base) + * if the timer value goes to 0x00000000, the clock stable bit of status + * and interrupt register is set. + * @esc_clk: specifies escape clock frequency for getting the escape clock + * prescaler value. + * @stop_holding_cnt: specifies the interval value between transmitting + * read packet(or write "set_tear_on" command) and BTA request. + * after transmitting read packet or write "set_tear_on" command, + * BTA requests to D-PHY automatically. this counter value specifies + * the interval between them. + * @bta_timeout: specifies the timer for BTA. + * this register specifies time out from BTA request to change + * the direction with respect to Tx escape clock. + * @rx_timeout: specifies the timer for LP Rx mode timeout. + * this register specifies time out on how long RxValid deasserts, + * after RxLpdt asserts with respect to Tx escape clock. + * - RxValid specifies Rx data valid indicator. + * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode. + * - RxValid and RxLpdt specifies signal from D-PHY. + */ +struct mipi_dsim_config { + unsigned char auto_flush; + unsigned char eot_disable; + + unsigned char auto_vertical_cnt; + unsigned char hse; + unsigned char hfp; + unsigned char hbp; + unsigned char hsa; + unsigned char cmd_allow; + + enum mipi_dsim_interface_type e_interface; + enum mipi_dsim_virtual_ch_no e_virtual_ch; + enum mipi_dsim_pixel_format e_pixel_format; + enum mipi_dsim_burst_mode_type e_burst_mode; + enum mipi_dsim_no_of_data_lane e_no_data_lane; + enum mipi_dsim_byte_clk_src e_byte_clk; + + /* + * =========================================== + * | P | M | S | MHz | + * ------------------------------------------- + * | 3 | 100 | 3 | 100 | + * | 3 | 100 | 2 | 200 | + * | 3 | 63 | 1 | 252 | + * | 4 | 100 | 1 | 300 | + * | 4 | 110 | 1 | 330 | + * | 12 | 350 | 1 | 350 | + * | 3 | 100 | 1 | 400 | + * | 4 | 150 | 1 | 450 | + * | 6 | 118 | 1 | 472 | + * | 3 | 120 | 1 | 480 | + * | 12 | 250 | 0 | 500 | + * | 4 | 100 | 0 | 600 | + * | 3 | 81 | 0 | 648 | + * | 3 | 88 | 0 | 704 | + * | 3 | 90 | 0 | 720 | + * | 3 | 100 | 0 | 800 | + * | 12 | 425 | 0 | 850 | + * | 4 | 150 | 0 | 900 | + * | 12 | 475 | 0 | 950 | + * | 6 | 250 | 0 | 1000 | + * ------------------------------------------- + */ + + /* + * pms could be calculated as the following. + * M * 24 / P * 2 ^ S = MHz + */ + unsigned char p; + unsigned short m; + unsigned char s; + + unsigned int pll_stable_time; + unsigned long esc_clk; + + unsigned short stop_holding_cnt; + unsigned char bta_timeout; + unsigned short rx_timeout; +}; + +/* + * struct mipi_dsim_device - global interface for mipi-dsi driver. + * + * @dev: driver model representation of the device. + * @id: unique device id. + * @clock: pointer to MIPI-DSI clock of clock framework. + * @irq: interrupt number to MIPI-DSI controller. + * @reg_base: base address to memory mapped SRF of MIPI-DSI controller. + * (virtual address) + * @lock: the mutex protecting this data structure. + * @dsim_info: infomation for configuring mipi-dsi controller. + * @master_ops: callbacks to mipi-dsi operations. + * @dsim_lcd_dev: pointer to activated ddi device. + * (it would be registered by mipi-dsi driver.) + * @dsim_lcd_drv: pointer to activated_ddi driver. + * (it would be registered by mipi-dsi driver.) + * @lcd_info: pointer to mipi_lcd_info structure. + * @state: specifies status of MIPI-DSI controller. + * the status could be RESET, INIT, STOP, HSCLKEN and ULPS. + * @data_lane: specifiec enabled data lane number. + * this variable would be set by driver according to e_no_data_lane + * automatically. + * @e_clk_src: select byte clock source. + * @pd: pointer to MIPI-DSI driver platform data. + */ +struct mipi_dsim_device { + struct device *dev; + int id; + struct resource *res; + struct clk *clock; + unsigned int irq; + void __iomem *reg_base; + struct mutex lock; + + struct mipi_dsim_config *dsim_config; + struct mipi_dsim_master_ops *master_ops; + struct mipi_dsim_lcd_device *dsim_lcd_dev; + struct mipi_dsim_lcd_driver *dsim_lcd_drv; + + unsigned int state; + unsigned int data_lane; + unsigned int e_clk_src; + bool suspended; + + struct mipi_dsim_platform_data *pd; +}; + +/* + * struct mipi_dsim_platform_data - interface to platform data + * for mipi-dsi driver. + * + * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver. + * lcd panel driver searched would be actived. + * @dsim_config: pointer of structure for configuring mipi-dsi controller. + * @enabled: indicate whether mipi controller got enabled or not. + * @lcd_panel_info: pointer for lcd panel specific structure. + * this structure specifies width, height, timing and polarity and so on. + * @phy_enable: pointer to a callback controlling D-PHY enable/reset + */ +struct mipi_dsim_platform_data { + char lcd_panel_name[PANEL_NAME_SIZE]; + + struct mipi_dsim_config *dsim_config; + unsigned int enabled; + void *lcd_panel_info; + + int (*phy_enable)(struct platform_device *pdev, bool on); +}; + +/* + * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations. + * + * @cmd_write: transfer command to lcd panel at LP mode. + * @cmd_read: read command from rx register. + * @get_dsim_frame_done: get the status that all screen data have been + * transferred to mipi-dsi. + * @clear_dsim_frame_done: clear frame done status. + * @get_fb_frame_done: get frame done status of display controller. + * @trigger: trigger display controller. + * - this one would be used only in case of CPU mode. + * @set_early_blank_mode: set framebuffer blank mode. + * - this callback should be called prior to fb_blank() by a client driver + * only if needing. + * @set_blank_mode: set framebuffer blank mode. + * - this callback should be called after fb_blank() by a client driver + * only if needing. + */ + +struct mipi_dsim_master_ops { + int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id, + const unsigned char *data0, unsigned int data1); + int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id, + unsigned int data0, unsigned int req_size, u8 *rx_buf); + int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim); + int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim); + + int (*get_fb_frame_done)(struct fb_info *info); + void (*trigger)(struct fb_info *info); + int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power); + int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power); +}; + +/* + * device structure for mipi-dsi based lcd panel. + * + * @name: name of the device to use with this device, or an + * alias for that name. + * @dev: driver model representation of the device. + * @id: id of device to be registered. + * @bus_id: bus id for identifing connected bus + * and this bus id should be same as id of mipi_dsim_device. + * @irq: irq number for signaling when framebuffer transfer of + * lcd panel module is completed. + * this irq would be used only for MIPI-DSI based CPU mode lcd panel. + * @master: pointer to mipi-dsi master device object. + * @platform_data: lcd panel specific platform data. + */ +struct mipi_dsim_lcd_device { + char *name; + struct device dev; + int id; + int bus_id; + int irq; + + struct mipi_dsim_device *master; + void *platform_data; +}; + +/* + * driver structure for mipi-dsi based lcd panel. + * + * this structure should be registered by lcd panel driver. + * mipi-dsi driver seeks lcd panel registered through name field + * and calls these callback functions in appropriate time. + * + * @name: name of the driver to use with this device, or an + * alias for that name. + * @id: id of driver to be registered. + * this id would be used for finding device object registered. + */ +struct mipi_dsim_lcd_driver { + char *name; + int id; + + void (*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable); + void (*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev); + int (*probe)(struct mipi_dsim_lcd_device *dsim_dev); + int (*remove)(struct mipi_dsim_lcd_device *dsim_dev); + void (*shutdown)(struct mipi_dsim_lcd_device *dsim_dev); + int (*suspend)(struct mipi_dsim_lcd_device *dsim_dev); + int (*resume)(struct mipi_dsim_lcd_device *dsim_dev); +}; + +/* + * register mipi_dsim_lcd_device to mipi-dsi master. + */ +int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device + *lcd_dev); +/** + * register mipi_dsim_lcd_driver object defined by lcd panel driver + * to mipi-dsi driver. + */ +int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver + *lcd_drv); +#endif /* _EXYNOS_MIPI_DSIM_H */ diff --git a/include/video/sa1100fb.h b/include/video/sa1100fb.h new file mode 100644 index 000000000000..4ab409653785 --- /dev/null +++ b/include/video/sa1100fb.h @@ -0,0 +1,63 @@ +/* + * StrongARM 1100 LCD Controller Frame Buffer Device + * + * Copyright (C) 1999 Eric A. Thomas + * Based on acornfb.c Copyright (C) Russell King. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ +#ifndef _VIDEO_SA1100FB_H +#define _VIDEO_SA1100FB_H + +#include <linux/fb.h> +#include <linux/types.h> + +#define RGB_4 0 +#define RGB_8 1 +#define RGB_16 2 +#define NR_RGB 3 + +/* These are the bitfields for each display depth that we support. */ +struct sa1100fb_rgb { + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; +}; + +/* This structure describes the machine which we are running on. */ +struct sa1100fb_mach_info { + u_long pixclock; + + u_short xres; + u_short yres; + + u_char bpp; + u_char hsync_len; + u_char left_margin; + u_char right_margin; + + u_char vsync_len; + u_char upper_margin; + u_char lower_margin; + u_char sync; + + u_int cmap_greyscale:1, + cmap_inverse:1, + cmap_static:1, + unused:29; + + u_int lccr0; + u_int lccr3; + + /* Overrides for the default RGB maps */ + const struct sa1100fb_rgb *rgb[NR_RGB]; + + void (*backlight_power)(int); + void (*lcd_power)(int); + void (*set_visual)(u32); +}; + +#endif diff --git a/include/video/sh_mipi_dsi.h b/include/video/sh_mipi_dsi.h index 434d56b4a1a5..06c67fbc4eee 100644 --- a/include/video/sh_mipi_dsi.h +++ b/include/video/sh_mipi_dsi.h @@ -51,6 +51,7 @@ struct sh_mipi_dsi_info { int lane; unsigned long flags; u32 clksrc; + u32 phyctrl; /* for extra setting */ unsigned int vsynw_offset; int (*set_dot_clock)(struct platform_device *pdev, void __iomem *base, diff --git a/include/video/sh_mobile_hdmi.h b/include/video/sh_mobile_hdmi.h index b56932927d0a..728f9de9c258 100644 --- a/include/video/sh_mobile_hdmi.h +++ b/include/video/sh_mobile_hdmi.h @@ -31,8 +31,6 @@ struct clk; #define HDMI_SND_SRC_HBR (3 << 0) struct sh_mobile_hdmi_info { - struct sh_mobile_lcdc_chan_cfg *lcd_chan; - struct device *lcd_dev; unsigned int flags; long (*clk_optimize_parent)(unsigned long target, unsigned long *best_freq, unsigned long *parent_freq); diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h index fe30b759c51e..7571b27a0ba1 100644 --- a/include/video/sh_mobile_lcdc.h +++ b/include/video/sh_mobile_lcdc.h @@ -147,29 +147,23 @@ struct sh_mobile_lcdc_sys_bus_ops { unsigned long (*read_data)(void *handle); }; -struct module; -struct sh_mobile_lcdc_board_cfg { - struct module *owner; - void *board_data; - int (*setup_sys)(void *board_data, void *sys_ops_handle, +struct sh_mobile_lcdc_panel_cfg { + unsigned long width; /* Panel width in mm */ + unsigned long height; /* Panel height in mm */ + int (*setup_sys)(void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops); - void (*start_transfer)(void *board_data, void *sys_ops_handle, + void (*start_transfer)(void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops); - void (*display_on)(void *board_data, struct fb_info *info); - void (*display_off)(void *board_data); - int (*set_brightness)(void *board_data, int brightness); - int (*get_brightness)(void *board_data); -}; - -struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */ - unsigned long width; - unsigned long height; + void (*display_on)(void); + void (*display_off)(void); }; /* backlight info */ struct sh_mobile_lcdc_bl_info { const char *name; int max_brightness; + int (*set_brightness)(int brightness); + int (*get_brightness)(void); }; struct sh_mobile_lcdc_chan_cfg { @@ -179,13 +173,14 @@ struct sh_mobile_lcdc_chan_cfg { int interface_type; /* selects RGBn or SYSn I/F, see above */ int clock_divider; unsigned long flags; /* LCDC_FLAGS_... */ - const struct fb_videomode *lcd_cfg; - int num_cfg; - struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg; - struct sh_mobile_lcdc_board_cfg board_cfg; + const struct fb_videomode *lcd_modes; + int num_modes; + struct sh_mobile_lcdc_panel_cfg panel_cfg; struct sh_mobile_lcdc_bl_info bl_info; struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ - struct sh_mobile_meram_cfg *meram_cfg; + const struct sh_mobile_meram_cfg *meram_cfg; + + struct platform_device *tx_dev; /* HDMI/DSI transmitter device */ }; struct sh_mobile_lcdc_info { diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h index af602d602b28..29b2fd3b147e 100644 --- a/include/video/sh_mobile_meram.h +++ b/include/video/sh_mobile_meram.h @@ -17,52 +17,47 @@ enum { struct sh_mobile_meram_priv; struct sh_mobile_meram_ops; +/* + * struct sh_mobile_meram_info - MERAM platform data + * @reserved_icbs: Bitmask of reserved ICBs (for instance used through UIO) + */ struct sh_mobile_meram_info { int addr_mode; + u32 reserved_icbs; struct sh_mobile_meram_ops *ops; struct sh_mobile_meram_priv *priv; struct platform_device *pdev; }; /* icb config */ -struct sh_mobile_meram_icb { - int marker_icb; /* ICB # for Marker ICB */ - int cache_icb; /* ICB # for Cache ICB */ - int meram_offset; /* MERAM Buffer Offset to use */ - int meram_size; /* MERAM Buffer Size to use */ - - int cache_unit; /* bytes to cache per ICB */ +struct sh_mobile_meram_icb_cfg { + unsigned int meram_size; /* MERAM Buffer Size to use */ }; struct sh_mobile_meram_cfg { - struct sh_mobile_meram_icb icb[2]; - int pixelformat; - int current_reg; + struct sh_mobile_meram_icb_cfg icb[2]; }; struct module; struct sh_mobile_meram_ops { struct module *module; /* register usage of meram */ - int (*meram_register)(struct sh_mobile_meram_info *meram_dev, - struct sh_mobile_meram_cfg *cfg, - int xres, int yres, int pixelformat, - unsigned long base_addr_y, - unsigned long base_addr_c, - unsigned long *icb_addr_y, - unsigned long *icb_addr_c, int *pitch); + void *(*meram_register)(struct sh_mobile_meram_info *meram_dev, + const struct sh_mobile_meram_cfg *cfg, + unsigned int xres, unsigned int yres, + unsigned int pixelformat, + unsigned int *pitch); /* unregister usage of meram */ - int (*meram_unregister)(struct sh_mobile_meram_info *meram_dev, - struct sh_mobile_meram_cfg *cfg); + void (*meram_unregister)(struct sh_mobile_meram_info *meram_dev, + void *data); /* update meram settings */ - int (*meram_update)(struct sh_mobile_meram_info *meram_dev, - struct sh_mobile_meram_cfg *cfg, - unsigned long base_addr_y, - unsigned long base_addr_c, - unsigned long *icb_addr_y, - unsigned long *icb_addr_c); + void (*meram_update)(struct sh_mobile_meram_info *meram_dev, void *data, + unsigned long base_addr_y, + unsigned long base_addr_c, + unsigned long *icb_addr_y, + unsigned long *icb_addr_c); }; #endif /* __VIDEO_SH_MOBILE_MERAM_H__ */ diff --git a/include/video/udlfb.h b/include/video/udlfb.h index c41f308c9636..f9466fa54ba4 100644 --- a/include/video/udlfb.h +++ b/include/video/udlfb.h @@ -41,6 +41,7 @@ struct dlfb_data { char *backing_buffer; int fb_count; bool virtualized; /* true when physical usb device not present */ + struct delayed_work init_framebuffer_work; struct delayed_work free_framebuffer_work; atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */ atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */ diff --git a/include/xen/interface/hvm/params.h b/include/xen/interface/hvm/params.h index 1888d8c157e6..1b4f923d7086 100644 --- a/include/xen/interface/hvm/params.h +++ b/include/xen/interface/hvm/params.h @@ -90,6 +90,10 @@ /* Boolean: Enable aligning all periodic vpts to reduce interrupts */ #define HVM_PARAM_VPT_ALIGN 16 -#define HVM_NR_PARAMS 17 +/* Console debug shared memory ring and event channel */ +#define HVM_PARAM_CONSOLE_PFN 17 +#define HVM_PARAM_CONSOLE_EVTCHN 18 + +#define HVM_NR_PARAMS 19 #endif /* __XEN_PUBLIC_HVM_PARAMS_H__ */ diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h index c1080d9c705d..9ce788d8cf49 100644 --- a/include/xen/interface/physdev.h +++ b/include/xen/interface/physdev.h @@ -39,6 +39,27 @@ struct physdev_eoi { }; /* + * Register a shared page for the hypervisor to indicate whether the guest + * must issue PHYSDEVOP_eoi. The semantics of PHYSDEVOP_eoi change slightly + * once the guest used this function in that the associated event channel + * will automatically get unmasked. The page registered is used as a bit + * array indexed by Xen's PIRQ value. + */ +#define PHYSDEVOP_pirq_eoi_gmfn_v1 17 +/* + * Register a shared page for the hypervisor to indicate whether the + * guest must issue PHYSDEVOP_eoi. This hypercall is very similar to + * PHYSDEVOP_pirq_eoi_gmfn_v1 but it doesn't change the semantics of + * PHYSDEVOP_eoi. The page registered is used as a bit array indexed by + * Xen's PIRQ value. + */ +#define PHYSDEVOP_pirq_eoi_gmfn_v2 28 +struct physdev_pirq_eoi_gmfn { + /* IN */ + unsigned long gmfn; +}; + +/* * Query the status of an IRQ line. * @arg == pointer to physdev_irq_status_query structure. */ @@ -145,6 +166,13 @@ struct physdev_manage_pci { uint8_t devfn; }; +#define PHYSDEVOP_restore_msi 19 +struct physdev_restore_msi { + /* IN */ + uint8_t bus; + uint8_t devfn; +}; + #define PHYSDEVOP_manage_pci_add_ext 20 struct physdev_manage_pci_ext { /* IN */ diff --git a/include/xen/interface/platform.h b/include/xen/interface/platform.h index c1684680431b..486653f0dd8f 100644 --- a/include/xen/interface/platform.h +++ b/include/xen/interface/platform.h @@ -200,7 +200,7 @@ DEFINE_GUEST_HANDLE_STRUCT(xenpf_getidletime_t); #define XEN_PM_CX 0 #define XEN_PM_PX 1 #define XEN_PM_TX 2 - +#define XEN_PM_PDC 3 /* Px sub info type */ #define XEN_PX_PCT 1 #define XEN_PX_PSS 2 @@ -293,10 +293,27 @@ struct xenpf_set_processor_pminfo { union { struct xen_processor_power power;/* Cx: _CST/_CSD */ struct xen_processor_performance perf; /* Px: _PPC/_PCT/_PSS/_PSD */ + GUEST_HANDLE(uint32_t) pdc; }; }; DEFINE_GUEST_HANDLE_STRUCT(xenpf_set_processor_pminfo); +#define XENPF_get_cpuinfo 55 +struct xenpf_pcpuinfo { + /* IN */ + uint32_t xen_cpuid; + /* OUT */ + /* The maxium cpu_id that is present */ + uint32_t max_present; +#define XEN_PCPU_FLAGS_ONLINE 1 + /* Correponding xen_cpuid is not present*/ +#define XEN_PCPU_FLAGS_INVALID 2 + uint32_t flags; + uint32_t apic_id; + uint32_t acpi_id; +}; +DEFINE_GUEST_HANDLE_STRUCT(xenpf_pcpuinfo); + struct xen_platform_op { uint32_t cmd; uint32_t interface_version; /* XENPF_INTERFACE_VERSION */ @@ -312,6 +329,7 @@ struct xen_platform_op { struct xenpf_change_freq change_freq; struct xenpf_getidletime getidletime; struct xenpf_set_processor_pminfo set_pminfo; + struct xenpf_pcpuinfo pcpu_info; uint8_t pad[128]; } u; }; diff --git a/include/xen/tmem.h b/include/xen/tmem.h index 82e2c83a32f5..591550a22ac7 100644 --- a/include/xen/tmem.h +++ b/include/xen/tmem.h @@ -1,5 +1,9 @@ #ifndef _XEN_TMEM_H #define _XEN_TMEM_H + +#include <linux/types.h> + /* defined in drivers/xen/tmem.c */ -extern int tmem_enabled; +extern bool tmem_enabled; + #endif /* _XEN_TMEM_H */ diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 03c85d7387fb..6a198e46ab6e 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -23,6 +23,7 @@ int xen_create_contiguous_region(unsigned long vstart, unsigned int order, void xen_destroy_contiguous_region(unsigned long vstart, unsigned int order); +struct vm_area_struct; int xen_remap_domain_mfn_range(struct vm_area_struct *vma, unsigned long addr, unsigned long mfn, int nr, diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index e8c599b237c2..0a7515c1e3a4 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -139,9 +139,9 @@ int xenbus_transaction_start(struct xenbus_transaction *t); int xenbus_transaction_end(struct xenbus_transaction t, int abort); /* Single read and scanf: returns -errno or num scanned if > 0. */ +__scanf(4, 5) int xenbus_scanf(struct xenbus_transaction t, - const char *dir, const char *node, const char *fmt, ...) - __attribute__((format(scanf, 4, 5))); + const char *dir, const char *node, const char *fmt, ...); /* Single printf and write: returns -errno or 0. */ __printf(4, 5) |