diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/drm/drm_os_linux.h | 9 | ||||
| -rw-r--r-- | include/drm/drm_pciids.h | 6 | ||||
| -rw-r--r-- | include/linux/of_platform.h | 5 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 12 |
4 files changed, 15 insertions, 17 deletions
diff --git a/include/drm/drm_os_linux.h b/include/drm/drm_os_linux.h index 393369147a2d..675ddf4b441f 100644 --- a/include/drm/drm_os_linux.h +++ b/include/drm/drm_os_linux.h @@ -87,15 +87,6 @@ static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size) /** Other copying of data from kernel space */ #define DRM_COPY_TO_USER(arg1, arg2, arg3) \ copy_to_user(arg1, arg2, arg3) -/* Macros for copyfrom user, but checking readability only once */ -#define DRM_VERIFYAREA_READ( uaddr, size ) \ - (access_ok( VERIFY_READ, uaddr, size ) ? 0 : -EFAULT) -#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_from_user(arg1, arg2, arg3) -#define DRM_COPY_TO_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_to_user(arg1, arg2, arg3) -#define DRM_GET_USER_UNCHECKED(val, uaddr) \ - __get_user(val, uaddr) #define DRM_HZ HZ diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index c2af598f701d..bb1bc485390b 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -152,6 +152,12 @@ {0x1002, 0x6621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6623, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6631, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6664, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6665, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6667, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x666F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3863a4dbdf18..2a93b64a3869 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -11,9 +11,10 @@ * */ -#ifdef CONFIG_OF_DEVICE #include <linux/device.h> #include <linux/mod_devicetable.h> + +#ifdef CONFIG_OF_DEVICE #include <linux/pm.h> #include <linux/of_device.h> #include <linux/platform_device.h> @@ -100,7 +101,7 @@ extern int of_platform_populate(struct device_node *root, #if !defined(CONFIG_OF_ADDRESS) struct of_dev_auxdata; -struct device; +struct device_node; static inline int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 72474e18f1e0..6aa238096622 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -37,17 +37,17 @@ * if it is 0, pull-down is disabled. * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and * low, this is the most typical case and is typically achieved with two - * active transistors on the output. Sending this config will enabale + * active transistors on the output. Setting this config will enable * push-pull mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports - * which are then pulled up with an external resistor. Sending this - * config will enabale open drain mode, the argument is ignored. + * which are then pulled up with an external resistor. Setting this + * config will enable open drain mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source - * (open emitter). Sending this config will enabale open drain mode, the + * (open emitter). Setting this config will enable open drain mode, the * argument is ignored. - * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as - * argument. The argument is in mA. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current + * passed as argument. The argument is in mA. * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, * schmitt-trigger mode is disabled. |