diff options
Diffstat (limited to 'include/uapi')
-rw-r--r-- | include/uapi/drm/amdgpu_drm.h | 2 | ||||
-rw-r--r-- | include/uapi/drm/drm.h | 18 | ||||
-rw-r--r-- | include/uapi/drm/drm_fourcc.h | 11 | ||||
-rw-r--r-- | include/uapi/drm/vmwgfx_drm.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/audit.h | 2 | ||||
-rw-r--r-- | include/uapi/linux/bpf.h | 165 | ||||
-rw-r--r-- | include/uapi/linux/btf.h | 3 | ||||
-rw-r--r-- | include/uapi/linux/can/netlink.h | 13 | ||||
-rw-r--r-- | include/uapi/linux/ethtool.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/ethtool_netlink.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/if_link.h | 2 | ||||
-rw-r--r-- | include/uapi/linux/kfd_sysfs.h | 108 | ||||
-rw-r--r-- | include/uapi/linux/net_tstamp.h | 17 | ||||
-rw-r--r-- | include/uapi/linux/nl80211.h | 63 | ||||
-rw-r--r-- | include/uapi/linux/pfkeyv2.h | 2 | ||||
-rw-r--r-- | include/uapi/linux/pkt_cls.h | 9 | ||||
-rw-r--r-- | include/uapi/linux/rtnetlink.h | 2 | ||||
-rw-r--r-- | include/uapi/linux/smc.h | 2 | ||||
-rw-r--r-- | include/uapi/linux/smc_diag.h | 11 | ||||
-rw-r--r-- | include/uapi/linux/tty.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/v4l2-controls.h | 288 | ||||
-rw-r--r-- | include/uapi/linux/videodev2.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/xfrm.h | 1 | ||||
-rw-r--r-- | include/uapi/rdma/mlx5_user_ioctl_cmds.h | 2 |
24 files changed, 706 insertions, 25 deletions
diff --git a/include/uapi/drm/amdgpu_drm.h b/include/uapi/drm/amdgpu_drm.h index 26e45fc5eb1a..0b94ec7b73e7 100644 --- a/include/uapi/drm/amdgpu_drm.h +++ b/include/uapi/drm/amdgpu_drm.h @@ -80,7 +80,7 @@ extern "C" { * * %AMDGPU_GEM_DOMAIN_GTT GPU accessible system memory, mapped into the * GPU's virtual address space via gart. Gart memory linearizes non-contiguous - * pages of system memory, allows GPU access system memory in a linezrized + * pages of system memory, allows GPU access system memory in a linearized * fashion. * * %AMDGPU_GEM_DOMAIN_VRAM Local video memory. For APUs, it is memory diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h index 3b810b53ba8b..642808520d92 100644 --- a/include/uapi/drm/drm.h +++ b/include/uapi/drm/drm.h @@ -1096,6 +1096,24 @@ extern "C" { #define DRM_IOCTL_SYNCOBJ_TRANSFER DRM_IOWR(0xCC, struct drm_syncobj_transfer) #define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL DRM_IOWR(0xCD, struct drm_syncobj_timeline_array) +/** + * DRM_IOCTL_MODE_GETFB2 - Get framebuffer metadata. + * + * This queries metadata about a framebuffer. User-space fills + * &drm_mode_fb_cmd2.fb_id as the input, and the kernels fills the rest of the + * struct as the output. + * + * If the client is DRM master or has &CAP_SYS_ADMIN, &drm_mode_fb_cmd2.handles + * will be filled with GEM buffer handles. Planes are valid until one has a + * zero handle -- this can be used to compute the number of planes. + * + * Otherwise, &drm_mode_fb_cmd2.handles will be zeroed and planes are valid + * until one has a zero &drm_mode_fb_cmd2.pitches. + * + * If the framebuffer has a format modifier, &DRM_MODE_FB_MODIFIERS will be set + * in &drm_mode_fb_cmd2.flags and &drm_mode_fb_cmd2.modifier will contain the + * modifier. Otherwise, user-space must ignore &drm_mode_fb_cmd2.modifier. + */ #define DRM_IOCTL_MODE_GETFB2 DRM_IOWR(0xCE, struct drm_mode_fb_cmd2) /* diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h index 7f652c96845b..fc0c1454d275 100644 --- a/include/uapi/drm/drm_fourcc.h +++ b/include/uapi/drm/drm_fourcc.h @@ -314,6 +314,13 @@ extern "C" { */ #define DRM_FORMAT_P016 fourcc_code('P', '0', '1', '6') /* 2x2 subsampled Cr:Cb plane 16 bits per channel */ +/* 2 plane YCbCr420. + * 3 10 bit components and 2 padding bits packed into 4 bytes. + * index 0 = Y plane, [31:0] x:Y2:Y1:Y0 2:10:10:10 little endian + * index 1 = Cr:Cb plane, [63:0] x:Cr2:Cb2:Cr1:x:Cb1:Cr0:Cb0 [2:10:10:10:2:10:10:10] little endian + */ +#define DRM_FORMAT_P030 fourcc_code('P', '0', '3', '0') /* 2x2 subsampled Cr:Cb plane 10 bits per channel packed */ + /* 3 plane non-subsampled (444) YCbCr * 16 bits per component, but only 10 bits are used and 6 bits are padded * index 0: Y plane, [15:0] Y:x [10:6] little endian @@ -854,6 +861,10 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) * and UV. Some SAND-using hardware stores UV in a separate tiled * image from Y to reduce the column height, which is not supported * with these modifiers. + * + * The DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT modifier is also + * supported for DRM_FORMAT_P030 where the columns remain as 128 bytes + * wide, but as this is a 10 bpp format that translates to 96 pixels. */ #define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \ diff --git a/include/uapi/drm/vmwgfx_drm.h b/include/uapi/drm/vmwgfx_drm.h index 9078775feb51..8277644c1144 100644 --- a/include/uapi/drm/vmwgfx_drm.h +++ b/include/uapi/drm/vmwgfx_drm.h @@ -110,6 +110,7 @@ extern "C" { #define DRM_VMW_PARAM_HW_CAPS2 13 #define DRM_VMW_PARAM_SM4_1 14 #define DRM_VMW_PARAM_SM5 15 +#define DRM_VMW_PARAM_GL43 16 /** * enum drm_vmw_handle_type - handle type for ref ioctls diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 9176a095fefc..8eda133ca4c1 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -514,7 +514,7 @@ struct audit_rule_data { __u32 values[AUDIT_MAX_FIELDS]; __u32 fieldflags[AUDIT_MAX_FIELDS]; __u32 buflen; /* total length of string fields */ - char buf[0]; /* string fields buffer */ + char buf[]; /* string fields buffer */ }; #endif /* _UAPI_LINUX_AUDIT_H_ */ diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index ba5af15e25f5..b0383d371b9a 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1342,8 +1342,10 @@ union bpf_attr { /* or valid module BTF object fd or 0 to attach to vmlinux */ __u32 attach_btf_obj_fd; }; - __u32 :32; /* pad */ + __u32 core_relo_cnt; /* number of bpf_core_relo */ __aligned_u64 fd_array; /* array of FDs */ + __aligned_u64 core_relos; + __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */ }; struct { /* anonymous struct used by BPF_OBJ_* commands */ @@ -1744,7 +1746,7 @@ union bpf_attr { * if the maximum number of tail calls has been reached for this * chain of programs. This limit is defined in the kernel by the * macro **MAX_TAIL_CALL_CNT** (not accessible to user space), - * which is currently set to 32. + * which is currently set to 33. * Return * 0 on success, or a negative error in case of failure. * @@ -4938,6 +4940,84 @@ union bpf_attr { * **-ENOENT** if symbol is not found. * * **-EPERM** if caller does not have permission to obtain kernel address. + * + * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * Find vma of *task* that contains *addr*, call *callback_fn* + * function with *task*, *vma*, and *callback_ctx*. + * The *callback_fn* should be a static function and + * the *callback_ctx* should be a pointer to the stack. + * The *flags* is used to control certain aspects of the helper. + * Currently, the *flags* must be 0. + * + * The expected callback signature is + * + * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx); + * + * Return + * 0 on success. + * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*. + * **-EBUSY** if failed to try lock mmap_lock. + * **-EINVAL** for invalid **flags**. + * + * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For **nr_loops**, call **callback_fn** function + * with **callback_ctx** as the context parameter. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. Currently, nr_loops is + * limited to 1 << 23 (~8 million) loops. + * + * long (\*callback_fn)(u32 index, void \*ctx); + * + * where **index** is the current index in the loop. The index + * is zero-indexed. + * + * If **callback_fn** returns 0, the helper will continue to the next + * loop. If return value is 1, the helper will skip the rest of + * the loops and return. Other return values are not used now, + * and will be rejected by the verifier. + * + * Return + * The number of loops performed, **-EINVAL** for invalid **flags**, + * **-E2BIG** if **nr_loops** exceeds the maximum number of loops. + * + * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2) + * Description + * Do strncmp() between **s1** and **s2**. **s1** doesn't need + * to be null-terminated and **s1_sz** is the maximum storage + * size of **s1**. **s2** must be a read-only string. + * Return + * An integer less than, equal to, or greater than zero + * if the first **s1_sz** bytes of **s1** is found to be + * less than, to match, or be greater than **s2**. + * + * long bpf_get_func_arg(void *ctx, u32 n, u64 *value) + * Description + * Get **n**-th argument (zero based) of the traced function (for tracing programs) + * returned in **value**. + * + * Return + * 0 on success. + * **-EINVAL** if n >= arguments count of traced function. + * + * long bpf_get_func_ret(void *ctx, u64 *value) + * Description + * Get return value of the traced function (for tracing programs) + * in **value**. + * + * Return + * 0 on success. + * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN. + * + * long bpf_get_func_arg_cnt(void *ctx) + * Description + * Get number of arguments of the traced function (for tracing programs). + * + * Return + * The number of arguments of the traced function. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5120,6 +5200,12 @@ union bpf_attr { FN(trace_vprintk), \ FN(skc_to_unix_sock), \ FN(kallsyms_lookup_name), \ + FN(find_vma), \ + FN(loop), \ + FN(strncmp), \ + FN(get_func_arg), \ + FN(get_func_ret), \ + FN(get_func_arg_cnt), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper @@ -6296,6 +6382,7 @@ struct bpf_sk_lookup { __u32 local_ip4; /* Network byte order */ __u32 local_ip6[4]; /* Network byte order */ __u32 local_port; /* Host byte order */ + __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */ }; /* @@ -6328,4 +6415,78 @@ enum { BTF_F_ZERO = (1ULL << 3), }; +/* bpf_core_relo_kind encodes which aspect of captured field/type/enum value + * has to be adjusted by relocations. It is emitted by llvm and passed to + * libbpf and later to the kernel. + */ +enum bpf_core_relo_kind { + BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */ + BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */ + BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */ + BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */ + BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */ + BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */ + BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */ + BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */ + BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */ + BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */ + BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */ + BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */ +}; + +/* + * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf + * and from libbpf to the kernel. + * + * CO-RE relocation captures the following data: + * - insn_off - instruction offset (in bytes) within a BPF program that needs + * its insn->imm field to be relocated with actual field info; + * - type_id - BTF type ID of the "root" (containing) entity of a relocatable + * type or field; + * - access_str_off - offset into corresponding .BTF string section. String + * interpretation depends on specific relocation kind: + * - for field-based relocations, string encodes an accessed field using + * a sequence of field and array indices, separated by colon (:). It's + * conceptually very close to LLVM's getelementptr ([0]) instruction's + * arguments for identifying offset to a field. + * - for type-based relocations, strings is expected to be just "0"; + * - for enum value-based relocations, string contains an index of enum + * value within its enum type; + * - kind - one of enum bpf_core_relo_kind; + * + * Example: + * struct sample { + * int a; + * struct { + * int b[10]; + * }; + * }; + * + * struct sample *s = ...; + * int *x = &s->a; // encoded as "0:0" (a is field #0) + * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1, + * // b is field #0 inside anon struct, accessing elem #5) + * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array) + * + * type_id for all relocs in this example will capture BTF type id of + * `struct sample`. + * + * Such relocation is emitted when using __builtin_preserve_access_index() + * Clang built-in, passing expression that captures field address, e.g.: + * + * bpf_probe_read(&dst, sizeof(dst), + * __builtin_preserve_access_index(&src->a.b.c)); + * + * In this case Clang will emit field relocation recording necessary data to + * be able to find offset of embedded `a.b.c` field within `src` struct. + * + * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction + */ +struct bpf_core_relo { + __u32 insn_off; + __u32 type_id; + __u32 access_str_off; + enum bpf_core_relo_kind kind; +}; + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index deb12f755f0f..b0d8fea1951d 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -43,7 +43,7 @@ struct btf_type { * "size" tells the size of the type it is describing. * * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, - * FUNC, FUNC_PROTO, VAR and DECL_TAG. + * FUNC, FUNC_PROTO, VAR, DECL_TAG and TYPE_TAG. * "type" is a type_id referring to another type. */ union { @@ -75,6 +75,7 @@ enum { BTF_KIND_DATASEC = 15, /* Section */ BTF_KIND_FLOAT = 16, /* Floating point */ BTF_KIND_DECL_TAG = 17, /* Decl Tag */ + BTF_KIND_TYPE_TAG = 18, /* Type Tag */ NR_BTF_KINDS, BTF_KIND_MAX = NR_BTF_KINDS - 1, diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h index 75b85c60efb2..02ec32d69474 100644 --- a/include/uapi/linux/can/netlink.h +++ b/include/uapi/linux/can/netlink.h @@ -137,6 +137,7 @@ enum { IFLA_CAN_DATA_BITRATE_CONST, IFLA_CAN_BITRATE_MAX, IFLA_CAN_TDC, + IFLA_CAN_CTRLMODE_EXT, /* add new constants above here */ __IFLA_CAN_MAX, @@ -166,6 +167,18 @@ enum { IFLA_CAN_TDC_MAX = __IFLA_CAN_TDC - 1 }; +/* + * IFLA_CAN_CTRLMODE_EXT nest: controller mode extended parameters + */ +enum { + IFLA_CAN_CTRLMODE_UNSPEC, + IFLA_CAN_CTRLMODE_SUPPORTED, /* u32 */ + + /* add new constants above here */ + __IFLA_CAN_CTRLMODE, + IFLA_CAN_CTRLMODE_MAX = __IFLA_CAN_CTRLMODE - 1 +}; + /* u16 termination range: 1..65535 Ohms */ #define CAN_TERMINATION_DISABLED 0 diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index a2223b685451..7bc4b8def12c 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -231,6 +231,7 @@ enum tunable_id { ETHTOOL_RX_COPYBREAK, ETHTOOL_TX_COPYBREAK, ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ + ETHTOOL_TX_COPYBREAK_BUF_SIZE, /* * Add your fresh new tunable attribute above and remember to update * tunable_strings[] in net/ethtool/common.c diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 999777d32dcf..cca6e474a085 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -329,6 +329,7 @@ enum { ETHTOOL_A_RINGS_RX_MINI, /* u32 */ ETHTOOL_A_RINGS_RX_JUMBO, /* u32 */ ETHTOOL_A_RINGS_TX, /* u32 */ + ETHTOOL_A_RINGS_RX_BUF_LEN, /* u32 */ /* add new constants above here */ __ETHTOOL_A_RINGS_CNT, diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index eebd3894fe89..6218f93f5c1a 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -347,6 +347,7 @@ enum { */ IFLA_PARENT_DEV_NAME, IFLA_PARENT_DEV_BUS_NAME, + IFLA_GRO_MAX_SIZE, __IFLA_MAX }; @@ -858,6 +859,7 @@ enum { IFLA_BOND_TLB_DYNAMIC_LB, IFLA_BOND_PEER_NOTIF_DELAY, IFLA_BOND_AD_LACP_ACTIVE, + IFLA_BOND_MISSED_MAX, __IFLA_BOND_MAX, }; diff --git a/include/uapi/linux/kfd_sysfs.h b/include/uapi/linux/kfd_sysfs.h new file mode 100644 index 000000000000..e1fb78b4bf09 --- /dev/null +++ b/include/uapi/linux/kfd_sysfs.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT WITH Linux-syscall-note */ +/* + * Copyright 2021 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef KFD_SYSFS_H_INCLUDED +#define KFD_SYSFS_H_INCLUDED + +/* Capability bits in node properties */ +#define HSA_CAP_HOT_PLUGGABLE 0x00000001 +#define HSA_CAP_ATS_PRESENT 0x00000002 +#define HSA_CAP_SHARED_WITH_GRAPHICS 0x00000004 +#define HSA_CAP_QUEUE_SIZE_POW2 0x00000008 +#define HSA_CAP_QUEUE_SIZE_32BIT 0x00000010 +#define HSA_CAP_QUEUE_IDLE_EVENT 0x00000020 +#define HSA_CAP_VA_LIMIT 0x00000040 +#define HSA_CAP_WATCH_POINTS_SUPPORTED 0x00000080 +#define HSA_CAP_WATCH_POINTS_TOTALBITS_MASK 0x00000f00 +#define HSA_CAP_WATCH_POINTS_TOTALBITS_SHIFT 8 +#define HSA_CAP_DOORBELL_TYPE_TOTALBITS_MASK 0x00003000 +#define HSA_CAP_DOORBELL_TYPE_TOTALBITS_SHIFT 12 + +#define HSA_CAP_DOORBELL_TYPE_PRE_1_0 0x0 +#define HSA_CAP_DOORBELL_TYPE_1_0 0x1 +#define HSA_CAP_DOORBELL_TYPE_2_0 0x2 +#define HSA_CAP_AQL_QUEUE_DOUBLE_MAP 0x00004000 + +/* Old buggy user mode depends on this being 0 */ +#define HSA_CAP_RESERVED_WAS_SRAM_EDCSUPPORTED 0x00080000 + +#define HSA_CAP_MEM_EDCSUPPORTED 0x00100000 +#define HSA_CAP_RASEVENTNOTIFY 0x00200000 +#define HSA_CAP_ASIC_REVISION_MASK 0x03c00000 +#define HSA_CAP_ASIC_REVISION_SHIFT 22 +#define HSA_CAP_SRAM_EDCSUPPORTED 0x04000000 +#define HSA_CAP_SVMAPI_SUPPORTED 0x08000000 +#define HSA_CAP_FLAGS_COHERENTHOSTACCESS 0x10000000 +#define HSA_CAP_RESERVED 0xe00f8000 + +/* Heap types in memory properties */ +#define HSA_MEM_HEAP_TYPE_SYSTEM 0 +#define HSA_MEM_HEAP_TYPE_FB_PUBLIC 1 +#define HSA_MEM_HEAP_TYPE_FB_PRIVATE 2 +#define HSA_MEM_HEAP_TYPE_GPU_GDS 3 +#define HSA_MEM_HEAP_TYPE_GPU_LDS 4 +#define HSA_MEM_HEAP_TYPE_GPU_SCRATCH 5 + +/* Flag bits in memory properties */ +#define HSA_MEM_FLAGS_HOT_PLUGGABLE 0x00000001 +#define HSA_MEM_FLAGS_NON_VOLATILE 0x00000002 +#define HSA_MEM_FLAGS_RESERVED 0xfffffffc + +/* Cache types in cache properties */ +#define HSA_CACHE_TYPE_DATA 0x00000001 +#define HSA_CACHE_TYPE_INSTRUCTION 0x00000002 +#define HSA_CACHE_TYPE_CPU 0x00000004 +#define HSA_CACHE_TYPE_HSACU 0x00000008 +#define HSA_CACHE_TYPE_RESERVED 0xfffffff0 + +/* Link types in IO link properties (matches CRAT link types) */ +#define HSA_IOLINK_TYPE_UNDEFINED 0 +#define HSA_IOLINK_TYPE_HYPERTRANSPORT 1 +#define HSA_IOLINK_TYPE_PCIEXPRESS 2 +#define HSA_IOLINK_TYPE_AMBA 3 +#define HSA_IOLINK_TYPE_MIPI 4 +#define HSA_IOLINK_TYPE_QPI_1_1 5 +#define HSA_IOLINK_TYPE_RESERVED1 6 +#define HSA_IOLINK_TYPE_RESERVED2 7 +#define HSA_IOLINK_TYPE_RAPID_IO 8 +#define HSA_IOLINK_TYPE_INFINIBAND 9 +#define HSA_IOLINK_TYPE_RESERVED3 10 +#define HSA_IOLINK_TYPE_XGMI 11 +#define HSA_IOLINK_TYPE_XGOP 12 +#define HSA_IOLINK_TYPE_GZ 13 +#define HSA_IOLINK_TYPE_ETHERNET_RDMA 14 +#define HSA_IOLINK_TYPE_RDMA_OTHER 15 +#define HSA_IOLINK_TYPE_OTHER 16 + +/* Flag bits in IO link properties (matches CRAT flags, excluding the + * bi-directional flag, which is not offially part of the CRAT spec, and + * only used internally in KFD) + */ +#define HSA_IOLINK_FLAGS_ENABLED (1 << 0) +#define HSA_IOLINK_FLAGS_NON_COHERENT (1 << 1) +#define HSA_IOLINK_FLAGS_NO_ATOMICS_32_BIT (1 << 2) +#define HSA_IOLINK_FLAGS_NO_ATOMICS_64_BIT (1 << 3) +#define HSA_IOLINK_FLAGS_NO_PEER_TO_PEER_DMA (1 << 4) +#define HSA_IOLINK_FLAGS_RESERVED 0xffffffe0 + +#endif diff --git a/include/uapi/linux/net_tstamp.h b/include/uapi/linux/net_tstamp.h index fcc61c73a666..55501e5e7ac8 100644 --- a/include/uapi/linux/net_tstamp.h +++ b/include/uapi/linux/net_tstamp.h @@ -62,7 +62,7 @@ struct so_timestamping { /** * struct hwtstamp_config - %SIOCGHWTSTAMP and %SIOCSHWTSTAMP parameter * - * @flags: no flags defined right now, must be zero for %SIOCSHWTSTAMP + * @flags: one of HWTSTAMP_FLAG_* * @tx_type: one of HWTSTAMP_TX_* * @rx_filter: one of HWTSTAMP_FILTER_* * @@ -78,6 +78,21 @@ struct hwtstamp_config { int rx_filter; }; +/* possible values for hwtstamp_config->flags */ +enum hwtstamp_flags { + /* + * With this flag, the user could get bond active interface's + * PHC index. Note this PHC index is not stable as when there + * is a failover, the bond active interface will be changed, so + * will be the PHC index. + */ + HWTSTAMP_FLAG_BONDED_PHC_INDEX = (1<<0), +#define HWTSTAMP_FLAG_BONDED_PHC_INDEX HWTSTAMP_FLAG_BONDED_PHC_INDEX + + HWTSTAMP_FLAG_LAST = HWTSTAMP_FLAG_BONDED_PHC_INDEX, + HWTSTAMP_FLAG_MASK = (HWTSTAMP_FLAG_LAST - 1) | HWTSTAMP_FLAG_LAST +}; + /* possible values for hwtstamp_config->tx_type */ enum hwtstamp_tx_types { /* diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 61cab81e920d..195a238a322e 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1232,6 +1232,11 @@ * &NL80211_ATTR_FILS_NONCES - for FILS Nonces * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) * + * @NL80211_CMD_ASSOC_COMEBACK: notification about an association + * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC + * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to + * specify the timeout value. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1474,6 +1479,8 @@ enum nl80211_commands { NL80211_CMD_SET_FILS_AAD, + NL80211_CMD_ASSOC_COMEBACK, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2470,7 +2477,9 @@ enum nl80211_commands { * space supports external authentication. This attribute shall be used * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver * may offload authentication processing to user space if this capability - * is indicated in the respective requests from the user space. + * is indicated in the respective requests from the user space. (This flag + * attribute deprecated for %NL80211_CMD_START_AP, use + * %NL80211_ATTR_AP_SETTINGS_FLAGS) * * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. @@ -2639,6 +2648,17 @@ enum nl80211_commands { * Mandatory parameter for the transmitting interface to enable MBSSID. * Optional for the non-transmitting interfaces. * + * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain + * available for radar/CAC detection on some hw. This chain can't be used + * to transmit or receive frames and it is bounded to a running wdev. + * Background radar/CAC detection allows to avoid the CAC downtime + * switching on a different channel during CAC detection on the selected + * radar channel. + * + * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags, + * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be + * used with %NL80211_CMD_START_AP request. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3145,6 +3165,10 @@ enum nl80211_attrs { NL80211_ATTR_MBSSID_CONFIG, NL80211_ATTR_MBSSID_ELEMS, + NL80211_ATTR_RADAR_BACKGROUND, + + NL80211_ATTR_AP_SETTINGS_FLAGS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3738,13 +3762,12 @@ enum nl80211_mpath_info { * capabilities IE * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as * defined in HE capabilities IE - * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently - * defined * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), * given for all 6 GHz band channels * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are * advertised on this band/for this iftype (binary) * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined */ enum nl80211_band_iftype_attr { __NL80211_BAND_IFTYPE_ATTR_INVALID, @@ -5555,7 +5578,7 @@ enum nl80211_iface_limit_attrs { * => allows 8 of AP/GO that can have BI gcd >= min gcd * * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 - * => allows two STAs on different channels + * => allows two STAs on the same or on different channels * * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 * => allows a STA plus three P2P interfaces @@ -5600,7 +5623,7 @@ enum nl80211_if_combination_attrs { * @NL80211_PLINK_ESTAB: mesh peer link is established * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh - * plink are discarded + * plink are discarded, except for authentication frames * @NUM_NL80211_PLINK_STATES: number of peer link states * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states */ @@ -5737,13 +5760,15 @@ enum nl80211_tdls_operation { NL80211_TDLS_DISABLE_LINK, }; -/* +/** * enum nl80211_ap_sme_features - device-integrated AP features - * Reserved for future use, no bits are defined in - * NL80211_ATTR_DEVICE_AP_SME yet. + * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver + * when user space indicates support for SA Query procedures offload during + * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT. + */ enum nl80211_ap_sme_features { + NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0, }; - */ /** * enum nl80211_feature_flags - device/driver features @@ -6051,6 +6076,9 @@ enum nl80211_feature_flags { * frames. Userspace has to share FILS AAD details to the driver by using * @NL80211_CMD_SET_FILS_AAD. * + * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC + * detection. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6117,6 +6145,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, NL80211_EXT_FEATURE_BSS_COLOR, NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, + NL80211_EXT_FEATURE_RADAR_BACKGROUND, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -7462,4 +7491,20 @@ enum nl80211_mbssid_config_attributes { NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1, }; +/** + * enum nl80211_ap_settings_flags - AP settings flags + * + * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external + * authentication. + * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query + * procedures offload to driver. If driver advertises + * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall + * ignore SA Query procedures and validations when this flag is set by + * userspace. + */ +enum nl80211_ap_settings_flags { + NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0, + NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h index d65b11785260..8abae1f6749c 100644 --- a/include/uapi/linux/pfkeyv2.h +++ b/include/uapi/linux/pfkeyv2.h @@ -309,6 +309,7 @@ struct sadb_x_filter { #define SADB_X_AALG_SHA2_512HMAC 7 #define SADB_X_AALG_RIPEMD160HMAC 8 #define SADB_X_AALG_AES_XCBC_MAC 9 +#define SADB_X_AALG_SM3_256HMAC 10 #define SADB_X_AALG_NULL 251 /* kame */ #define SADB_AALG_MAX 251 @@ -329,6 +330,7 @@ struct sadb_x_filter { #define SADB_X_EALG_AES_GCM_ICV16 20 #define SADB_X_EALG_CAMELLIACBC 22 #define SADB_X_EALG_NULL_AES_GMAC 23 +#define SADB_X_EALG_SM4CBC 24 #define SADB_EALG_MAX 253 /* last EALG */ /* private allocations should use 249-255 (RFC2407) */ #define SADB_X_EALG_SERPENTCBC 252 /* draft-ietf-ipsec-ciph-aes-cbc-00 */ diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 6836ccb9c45d..ee38b35c3f57 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -19,13 +19,16 @@ enum { TCA_ACT_FLAGS, TCA_ACT_HW_STATS, TCA_ACT_USED_HW_STATS, + TCA_ACT_IN_HW_COUNT, __TCA_ACT_MAX }; /* See other TCA_ACT_FLAGS_ * flags in include/net/act_api.h. */ -#define TCA_ACT_FLAGS_NO_PERCPU_STATS 1 /* Don't use percpu allocator for - * actions stats. - */ +#define TCA_ACT_FLAGS_NO_PERCPU_STATS (1 << 0) /* Don't use percpu allocator for + * actions stats. + */ +#define TCA_ACT_FLAGS_SKIP_HW (1 << 1) /* don't offload action to HW */ +#define TCA_ACT_FLAGS_SKIP_SW (1 << 2) /* don't use action in SW */ /* tca HW stats type * When user does not pass the attribute, he does not care. diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index 5888492a5257..93d934cc4613 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -754,6 +754,8 @@ enum rtnetlink_groups { #define RTNLGRP_NEXTHOP RTNLGRP_NEXTHOP RTNLGRP_BRVLAN, #define RTNLGRP_BRVLAN RTNLGRP_BRVLAN + RTNLGRP_MCTP_IFADDR, +#define RTNLGRP_MCTP_IFADDR RTNLGRP_MCTP_IFADDR __RTNLGRP_MAX }; #define RTNLGRP_MAX (__RTNLGRP_MAX - 1) diff --git a/include/uapi/linux/smc.h b/include/uapi/linux/smc.h index 20f33b27787f..6c2874fd2c00 100644 --- a/include/uapi/linux/smc.h +++ b/include/uapi/linux/smc.h @@ -119,6 +119,8 @@ enum { SMC_NLA_LGR_R_CONNS_NUM, /* u32 */ SMC_NLA_LGR_R_V2_COMMON, /* nest */ SMC_NLA_LGR_R_V2, /* nest */ + SMC_NLA_LGR_R_NET_COOKIE, /* u64 */ + SMC_NLA_LGR_R_PAD, /* flag */ __SMC_NLA_LGR_R_MAX, SMC_NLA_LGR_R_MAX = __SMC_NLA_LGR_R_MAX - 1 }; diff --git a/include/uapi/linux/smc_diag.h b/include/uapi/linux/smc_diag.h index 8cb3a6fef553..c7008d87f1a4 100644 --- a/include/uapi/linux/smc_diag.h +++ b/include/uapi/linux/smc_diag.h @@ -84,11 +84,12 @@ struct smc_diag_conninfo { /* SMC_DIAG_LINKINFO */ struct smc_diag_linkinfo { - __u8 link_id; /* link identifier */ - __u8 ibname[IB_DEVICE_NAME_MAX]; /* name of the RDMA device */ - __u8 ibport; /* RDMA device port number */ - __u8 gid[40]; /* local GID */ - __u8 peer_gid[40]; /* peer GID */ + __u8 link_id; /* link identifier */ + __u8 ibname[IB_DEVICE_NAME_MAX]; /* name of the RDMA device */ + __u8 ibport; /* RDMA device port number */ + __u8 gid[40]; /* local GID */ + __u8 peer_gid[40]; /* peer GID */ + __aligned_u64 net_cookie; /* RDMA device net namespace */ }; struct smc_diag_lgrinfo { diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h index 376cccf397be..a58deb3061eb 100644 --- a/include/uapi/linux/tty.h +++ b/include/uapi/linux/tty.h @@ -38,5 +38,6 @@ #define N_NCI 25 /* NFC NCI UART */ #define N_SPEAKUP 26 /* Speakup communication with synths */ #define N_NULL 27 /* Null ldisc used for error handling */ +#define N_MCTP 28 /* MCTP-over-serial */ #endif /* _UAPI_LINUX_TTY_H */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 5fea5feb0412..c8e0f84d204d 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -128,6 +128,7 @@ enum v4l2_colorfx { V4L2_COLORFX_SOLARIZATION = 13, V4L2_COLORFX_ANTIQUE = 14, V4L2_COLORFX_SET_CBCR = 15, + V4L2_COLORFX_SET_RGB = 16, }; #define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32) #define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33) @@ -145,9 +146,10 @@ enum v4l2_colorfx { #define V4L2_CID_ALPHA_COMPONENT (V4L2_CID_BASE+41) #define V4L2_CID_COLORFX_CBCR (V4L2_CID_BASE+42) +#define V4L2_CID_COLORFX_RGB (V4L2_CID_BASE+43) /* last CID + 1 */ -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+43) +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+44) /* USER-class private control IDs */ @@ -2016,6 +2018,290 @@ struct v4l2_ctrl_hdr10_mastering_display { __u32 min_display_mastering_luminance; }; +/* Stateless VP9 controls */ + +#define V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED 0x1 +#define V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE 0x2 + +/** + * struct v4l2_vp9_loop_filter - VP9 loop filter parameters + * + * @ref_deltas: contains the adjustment needed for the filter level based on the + * chosen reference frame. If this syntax element is not present in the bitstream, + * users should pass its last value. + * @mode_deltas: contains the adjustment needed for the filter level based on the + * chosen mode. If this syntax element is not present in the bitstream, users should + * pass its last value. + * @level: indicates the loop filter strength. + * @sharpness: indicates the sharpness level. + * @flags: combination of V4L2_VP9_LOOP_FILTER_FLAG_{} flags. + * @reserved: padding field. Should be zeroed by applications. + * + * This structure contains all loop filter related parameters. See sections + * '7.2.8 Loop filter semantics' of the VP9 specification for more details. + */ +struct v4l2_vp9_loop_filter { + __s8 ref_deltas[4]; + __s8 mode_deltas[2]; + __u8 level; + __u8 sharpness; + __u8 flags; + __u8 reserved[7]; +}; + +/** + * struct v4l2_vp9_quantization - VP9 quantization parameters + * + * @base_q_idx: indicates the base frame qindex. + * @delta_q_y_dc: indicates the Y DC quantizer relative to base_q_idx. + * @delta_q_uv_dc: indicates the UV DC quantizer relative to base_q_idx. + * @delta_q_uv_ac: indicates the UV AC quantizer relative to base_q_idx. + * @reserved: padding field. Should be zeroed by applications. + * + * Encodes the quantization parameters. See section '7.2.9 Quantization params + * syntax' of the VP9 specification for more details. + */ +struct v4l2_vp9_quantization { + __u8 base_q_idx; + __s8 delta_q_y_dc; + __s8 delta_q_uv_dc; + __s8 delta_q_uv_ac; + __u8 reserved[4]; +}; + +#define V4L2_VP9_SEGMENTATION_FLAG_ENABLED 0x01 +#define V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP 0x02 +#define V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE 0x04 +#define V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA 0x08 +#define V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE 0x10 + +#define V4L2_VP9_SEG_LVL_ALT_Q 0 +#define V4L2_VP9_SEG_LVL_ALT_L 1 +#define V4L2_VP9_SEG_LVL_REF_FRAME 2 +#define V4L2_VP9_SEG_LVL_SKIP 3 +#define V4L2_VP9_SEG_LVL_MAX 4 + +#define V4L2_VP9_SEGMENT_FEATURE_ENABLED(id) (1 << (id)) +#define V4L2_VP9_SEGMENT_FEATURE_ENABLED_MASK 0xf + +/** + * struct v4l2_vp9_segmentation - VP9 segmentation parameters + * + * @feature_data: data attached to each feature. Data entry is only valid if + * the feature is enabled. The array shall be indexed with segment number as + * the first dimension (0..7) and one of V4L2_VP9_SEG_{} as the second dimension. + * @feature_enabled: bitmask defining which features are enabled in each segment. + * The value for each segment is a combination of V4L2_VP9_SEGMENT_FEATURE_ENABLED(id) + * values where id is one of V4L2_VP9_SEG_LVL_{}. + * @tree_probs: specifies the probability values to be used when decoding a + * Segment-ID. See '5.15. Segmentation map' section of the VP9 specification + * for more details. + * @pred_probs: specifies the probability values to be used when decoding a + * Predicted-Segment-ID. See '6.4.14. Get segment id syntax' section of :ref:`vp9` + * for more details. + * @flags: combination of V4L2_VP9_SEGMENTATION_FLAG_{} flags. + * @reserved: padding field. Should be zeroed by applications. + * + * Encodes the quantization parameters. See section '7.2.10 Segmentation params syntax' of + * the VP9 specification for more details. + */ +struct v4l2_vp9_segmentation { + __s16 feature_data[8][4]; + __u8 feature_enabled[8]; + __u8 tree_probs[7]; + __u8 pred_probs[3]; + __u8 flags; + __u8 reserved[5]; +}; + +#define V4L2_VP9_FRAME_FLAG_KEY_FRAME 0x001 +#define V4L2_VP9_FRAME_FLAG_SHOW_FRAME 0x002 +#define V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT 0x004 +#define V4L2_VP9_FRAME_FLAG_INTRA_ONLY 0x008 +#define V4L2_VP9_FRAME_FLAG_ALLOW_HIGH_PREC_MV 0x010 +#define V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX 0x020 +#define V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE 0x040 +#define V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING 0x080 +#define V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING 0x100 +#define V4L2_VP9_FRAME_FLAG_COLOR_RANGE_FULL_SWING 0x200 + +#define V4L2_VP9_SIGN_BIAS_LAST 0x1 +#define V4L2_VP9_SIGN_BIAS_GOLDEN 0x2 +#define V4L2_VP9_SIGN_BIAS_ALT 0x4 + +#define V4L2_VP9_RESET_FRAME_CTX_NONE 0 +#define V4L2_VP9_RESET_FRAME_CTX_SPEC 1 +#define V4L2_VP9_RESET_FRAME_CTX_ALL 2 + +#define V4L2_VP9_INTERP_FILTER_EIGHTTAP 0 +#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SMOOTH 1 +#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SHARP 2 +#define V4L2_VP9_INTERP_FILTER_BILINEAR 3 +#define V4L2_VP9_INTERP_FILTER_SWITCHABLE 4 + +#define V4L2_VP9_REFERENCE_MODE_SINGLE_REFERENCE 0 +#define V4L2_VP9_REFERENCE_MODE_COMPOUND_REFERENCE 1 +#define V4L2_VP9_REFERENCE_MODE_SELECT 2 + +#define V4L2_VP9_PROFILE_MAX 3 + +#define V4L2_CID_STATELESS_VP9_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 300) +/** + * struct v4l2_ctrl_vp9_frame - VP9 frame decoding control + * + * @lf: loop filter parameters. See &v4l2_vp9_loop_filter for more details. + * @quant: quantization parameters. See &v4l2_vp9_quantization for more details. + * @seg: segmentation parameters. See &v4l2_vp9_segmentation for more details. + * @flags: combination of V4L2_VP9_FRAME_FLAG_{} flags. + * @compressed_header_size: compressed header size in bytes. + * @uncompressed_header_size: uncompressed header size in bytes. + * @frame_width_minus_1: add 1 to it and you'll get the frame width expressed in pixels. + * @frame_height_minus_1: add 1 to it and you'll get the frame height expressed in pixels. + * @render_width_minus_1: add 1 to it and you'll get the expected render width expressed in + * pixels. This is not used during the decoding process but might be used by HW scalers + * to prepare a frame that's ready for scanout. + * @render_height_minus_1: add 1 to it and you'll get the expected render height expressed in + * pixels. This is not used during the decoding process but might be used by HW scalers + * to prepare a frame that's ready for scanout. + * @last_frame_ts: "last" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @golden_frame_ts: "golden" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @alt_frame_ts: "alt" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @ref_frame_sign_bias: a bitfield specifying whether the sign bias is set for a given + * reference frame. Either of V4L2_VP9_SIGN_BIAS_{}. + * @reset_frame_context: specifies whether the frame context should be reset to default values. + * Either of V4L2_VP9_RESET_FRAME_CTX_{}. + * @frame_context_idx: frame context that should be used/updated. + * @profile: VP9 profile. Can be 0, 1, 2 or 3. + * @bit_depth: bits per components. Can be 8, 10 or 12. Note that not all profiles support + * 10 and/or 12 bits depths. + * @interpolation_filter: specifies the filter selection used for performing inter prediction. + * Set to one of V4L2_VP9_INTERP_FILTER_{}. + * @tile_cols_log2: specifies the base 2 logarithm of the width of each tile (where the width + * is measured in units of 8x8 blocks). Shall be less than or equal to 6. + * @tile_rows_log2: specifies the base 2 logarithm of the height of each tile (where the height + * is measured in units of 8x8 blocks). + * @reference_mode: specifies the type of inter prediction to be used. + * Set to one of V4L2_VP9_REFERENCE_MODE_{}. + * @reserved: padding field. Should be zeroed by applications. + */ +struct v4l2_ctrl_vp9_frame { + struct v4l2_vp9_loop_filter lf; + struct v4l2_vp9_quantization quant; + struct v4l2_vp9_segmentation seg; + __u32 flags; + __u16 compressed_header_size; + __u16 uncompressed_header_size; + __u16 frame_width_minus_1; + __u16 frame_height_minus_1; + __u16 render_width_minus_1; + __u16 render_height_minus_1; + __u64 last_frame_ts; + __u64 golden_frame_ts; + __u64 alt_frame_ts; + __u8 ref_frame_sign_bias; + __u8 reset_frame_context; + __u8 frame_context_idx; + __u8 profile; + __u8 bit_depth; + __u8 interpolation_filter; + __u8 tile_cols_log2; + __u8 tile_rows_log2; + __u8 reference_mode; + __u8 reserved[7]; +}; + +#define V4L2_VP9_NUM_FRAME_CTX 4 + +/** + * struct v4l2_vp9_mv_probs - VP9 Motion vector probability updates + * @joint: motion vector joint probability updates. + * @sign: motion vector sign probability updates. + * @classes: motion vector class probability updates. + * @class0_bit: motion vector class0 bit probability updates. + * @bits: motion vector bits probability updates. + * @class0_fr: motion vector class0 fractional bit probability updates. + * @fr: motion vector fractional bit probability updates. + * @class0_hp: motion vector class0 high precision fractional bit probability updates. + * @hp: motion vector high precision fractional bit probability updates. + * + * This structure contains new values of motion vector probabilities. + * A value of zero in an array element means there is no update of the relevant probability. + * See `struct v4l2_vp9_prob_updates` for details. + */ +struct v4l2_vp9_mv_probs { + __u8 joint[3]; + __u8 sign[2]; + __u8 classes[2][10]; + __u8 class0_bit[2]; + __u8 bits[2][10]; + __u8 class0_fr[2][2][3]; + __u8 fr[2][3]; + __u8 class0_hp[2]; + __u8 hp[2]; +}; + +#define V4L2_CID_STATELESS_VP9_COMPRESSED_HDR (V4L2_CID_CODEC_STATELESS_BASE + 301) + +#define V4L2_VP9_TX_MODE_ONLY_4X4 0 +#define V4L2_VP9_TX_MODE_ALLOW_8X8 1 +#define V4L2_VP9_TX_MODE_ALLOW_16X16 2 +#define V4L2_VP9_TX_MODE_ALLOW_32X32 3 +#define V4L2_VP9_TX_MODE_SELECT 4 + +/** + * struct v4l2_ctrl_vp9_compressed_hdr - VP9 probability updates control + * @tx_mode: specifies the TX mode. Set to one of V4L2_VP9_TX_MODE_{}. + * @tx8: TX 8x8 probability updates. + * @tx16: TX 16x16 probability updates. + * @tx32: TX 32x32 probability updates. + * @coef: coefficient probability updates. + * @skip: skip probability updates. + * @inter_mode: inter mode probability updates. + * @interp_filter: interpolation filter probability updates. + * @is_inter: is inter-block probability updates. + * @comp_mode: compound prediction mode probability updates. + * @single_ref: single ref probability updates. + * @comp_ref: compound ref probability updates. + * @y_mode: Y prediction mode probability updates. + * @uv_mode: UV prediction mode probability updates. + * @partition: partition probability updates. + * @mv: motion vector probability updates. + * + * This structure holds the probabilities update as parsed in the compressed + * header (Spec 6.3). These values represent the value of probability update after + * being translated with inv_map_table[] (see 6.3.5). A value of zero in an array element + * means that there is no update of the relevant probability. + * + * This control is optional and needs to be used when dealing with the hardware which is + * not capable of parsing the compressed header itself. Only drivers which need it will + * implement it. + */ +struct v4l2_ctrl_vp9_compressed_hdr { + __u8 tx_mode; + __u8 tx8[2][1]; + __u8 tx16[2][2]; + __u8 tx32[2][3]; + __u8 coef[4][2][2][6][6][3]; + __u8 skip[3]; + __u8 inter_mode[7][3]; + __u8 interp_filter[4][2]; + __u8 is_inter[4]; + __u8 comp_mode[5]; + __u8 single_ref[5][2]; + __u8 comp_ref[5]; + __u8 y_mode[4][9]; + __u8 uv_mode[10][9]; + __u8 partition[16][3]; + + struct v4l2_vp9_mv_probs mv; +}; + /* MPEG-compression definitions kept for backwards compatibility */ #ifndef __KERNEL__ #define V4L2_CTRL_CLASS_MPEG V4L2_CTRL_CLASS_CODEC diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index f118fe7a9f58..df8b9c486ba1 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -703,6 +703,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ #define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') /* VP8 parsed frame */ #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ +#define V4L2_PIX_FMT_VP9_FRAME v4l2_fourcc('V', 'P', '9', 'F') /* VP9 parsed frame */ #define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */ #define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */ #define V4L2_PIX_FMT_FWHT_STATELESS v4l2_fourcc('S', 'F', 'W', 'H') /* Stateless FWHT (vicodec) */ @@ -1759,6 +1760,8 @@ struct v4l2_ext_control { struct v4l2_ctrl_mpeg2_sequence __user *p_mpeg2_sequence; struct v4l2_ctrl_mpeg2_picture __user *p_mpeg2_picture; struct v4l2_ctrl_mpeg2_quantisation __user *p_mpeg2_quantisation; + struct v4l2_ctrl_vp9_compressed_hdr __user *p_vp9_compressed_hdr_probs; + struct v4l2_ctrl_vp9_frame __user *p_vp9_frame; void __user *ptr; }; } __attribute__ ((packed)); @@ -1823,6 +1826,9 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_MPEG2_QUANTISATION = 0x0250, V4L2_CTRL_TYPE_MPEG2_SEQUENCE = 0x0251, V4L2_CTRL_TYPE_MPEG2_PICTURE = 0x0252, + + V4L2_CTRL_TYPE_VP9_COMPRESSED_HDR = 0x0260, + V4L2_CTRL_TYPE_VP9_FRAME = 0x0261, }; /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index eda0426ec4c2..4e29d7851890 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -313,6 +313,7 @@ enum xfrm_attr_type_t { XFRMA_SET_MARK, /* __u32 */ XFRMA_SET_MARK_MASK, /* __u32 */ XFRMA_IF_ID, /* __u32 */ + XFRMA_MTIMER_THRESH, /* __u32 in seconds for input SA */ __XFRMA_MAX #define XFRMA_OUTPUT_MARK XFRMA_SET_MARK /* Compatibility */ diff --git a/include/uapi/rdma/mlx5_user_ioctl_cmds.h b/include/uapi/rdma/mlx5_user_ioctl_cmds.h index ca2372864b70..e539c84d63f1 100644 --- a/include/uapi/rdma/mlx5_user_ioctl_cmds.h +++ b/include/uapi/rdma/mlx5_user_ioctl_cmds.h @@ -252,7 +252,7 @@ enum mlx5_ib_device_query_context_attrs { MLX5_IB_ATTR_QUERY_CONTEXT_RESP_UCTX = (1U << UVERBS_ID_NS_SHIFT), }; -#define MLX5_IB_DW_MATCH_PARAM 0x90 +#define MLX5_IB_DW_MATCH_PARAM 0xA0 struct mlx5_ib_match_params { __u32 match_params[MLX5_IB_DW_MATCH_PARAM]; |