diff options
Diffstat (limited to 'include/uapi')
| -rw-r--r-- | include/uapi/linux/batman_adv.h | 26 | ||||
| -rw-r--r-- | include/uapi/linux/bpf.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/can/isotp.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 114 | ||||
| -rw-r--r-- | include/uapi/linux/ppp-ioctl.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/rfkill.h | 16 | ||||
| -rw-r--r-- | include/uapi/linux/seg6_local.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/tcp.h | 4 |
8 files changed, 164 insertions, 5 deletions
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index bb0ae945b36a..bdb317faa1dc 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -675,4 +675,30 @@ enum batadv_tp_meter_reason { BATADV_TP_REASON_TOO_MANY = 133, }; +/** + * enum batadv_ifla_attrs - batman-adv ifla nested attributes + */ +enum batadv_ifla_attrs { + /** + * @IFLA_BATADV_UNSPEC: unspecified attribute which is not parsed by + * rtnetlink + */ + IFLA_BATADV_UNSPEC, + + /** + * @IFLA_BATADV_ALGO_NAME: routing algorithm (name) which should be + * used by the newly registered batadv net_device. + */ + IFLA_BATADV_ALGO_NAME, + + /* add attributes above here, update the policy in soft-interface.c */ + + /** + * @__IFLA_BATADV_MAX: internal use + */ + __IFLA_BATADV_MAX, +}; + +#define IFLA_BATADV_MAX (__IFLA_BATADV_MAX - 1) + #endif /* _UAPI_LINUX_BATMAN_ADV_H_ */ diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 30b477a26482..77d7c1bb2923 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -3985,8 +3985,8 @@ union bpf_attr { FN(seq_printf_btf), \ FN(skb_cgroup_classid), \ FN(redirect_neigh), \ - FN(bpf_per_cpu_ptr), \ - FN(bpf_this_cpu_ptr), \ + FN(per_cpu_ptr), \ + FN(this_cpu_ptr), \ FN(redirect_peer), \ FN(task_storage_get), \ FN(task_storage_delete), \ diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h index 7793b26aa154..c55935b64ccc 100644 --- a/include/uapi/linux/can/isotp.h +++ b/include/uapi/linux/can/isotp.h @@ -135,7 +135,7 @@ struct can_isotp_ll_options { #define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */ #define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */ #define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */ - +#define CAN_ISOTP_SF_BROADCAST 0x800 /* 1-to-N functional addressing */ /* default values */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 3e0d4a038ab6..40832d13c2f1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1178,6 +1178,10 @@ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included * if the recipient acknowledged the frame. * + * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is + * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to + * specify the wiphy index to be applied to. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1408,6 +1412,8 @@ enum nl80211_commands { NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, + NL80211_CMD_SET_SAR_SPECS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2079,7 +2085,8 @@ enum nl80211_commands { * until the channel switch event. * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission * must be blocked on the current channel (before the channel switch - * operation). + * operation). Also included in the channel switch started event if quiet + * was requested by the AP. * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information * for the time while performing a channel switch. * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel @@ -2534,6 +2541,15 @@ enum nl80211_commands { * This is a u8 attribute that encapsulates one of the values from * &enum nl80211_sae_pwe_mechanism. * + * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when + * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields + * of %nl80211_sar_attrs which specifies the sar type and related + * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. + * + * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and + * disassoc events to indicate that an immediate reconnect to the AP + * is desired. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3025,6 +3041,10 @@ enum nl80211_attrs { NL80211_ATTR_SAE_PWE, + NL80211_ATTR_RECONNECT_REQUESTED, + + NL80211_ATTR_SAR_SPEC, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -7156,4 +7176,96 @@ enum nl80211_sae_pwe_mechanism { NL80211_SAE_PWE_HASH_TO_ELEMENT, NL80211_SAE_PWE_BOTH, }; + +/** + * enum nl80211_sar_type - type of SAR specs + * + * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit + * + */ +enum nl80211_sar_type { + NL80211_SAR_TYPE_POWER, + + /* add new type here */ + + /* Keep last */ + NUM_NL80211_SAR_TYPE, +}; + +/** + * enum nl80211_sar_attrs - Attributes for SAR spec + * + * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. + * + * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power + * limit specifications. Each specification contains a set + * of %nl80211_sar_specs_attrs. + * + * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER + * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. + * + * For sar_capa dump, it contains array of + * %NL80211_SAR_ATTR_SPECS_START_FREQ + * and %NL80211_SAR_ATTR_SPECS_END_FREQ. + * + * @__NL80211_SAR_ATTR_LAST: Internal + * @NL80211_SAR_ATTR_MAX: highest sar attribute + * + * These attributes are used with %NL80211_CMD_SET_SAR_SPEC + */ +enum nl80211_sar_attrs { + __NL80211_SAR_ATTR_INVALID, + + NL80211_SAR_ATTR_TYPE, + NL80211_SAR_ATTR_SPECS, + + __NL80211_SAR_ATTR_LAST, + NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, +}; + +/** + * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs + * + * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual + * power limit value in units of 0.25 dBm if type is + * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). + * 0 means userspace doesn't have SAR limitation on this associated range. + * + * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the + * index of exported freq range table and the associated power limitation + * is applied to this range. + * + * Userspace isn't required to set all the ranges advertised by WLAN driver, + * and userspace can skip some certain ranges. These skipped ranges don't + * have SAR limitations, and they are same as setting the + * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any + * value higher than regulatory allowed value just means SAR power + * limitation is removed, but it's required to set at least one range. + * It's not allowed to set duplicated range in one SET operation. + * + * Every SET operation overwrites previous SET operation. + * + * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @__NL80211_SAR_ATTR_SPECS_LAST: Internal + * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute + */ +enum nl80211_sar_specs_attrs { + __NL80211_SAR_ATTR_SPECS_INVALID, + + NL80211_SAR_ATTR_SPECS_POWER, + NL80211_SAR_ATTR_SPECS_RANGE_INDEX, + NL80211_SAR_ATTR_SPECS_START_FREQ, + NL80211_SAR_ATTR_SPECS_END_FREQ, + + __NL80211_SAR_ATTR_SPECS_LAST, + NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/ppp-ioctl.h b/include/uapi/linux/ppp-ioctl.h index 7bd2a5a75348..8dbecb3ad036 100644 --- a/include/uapi/linux/ppp-ioctl.h +++ b/include/uapi/linux/ppp-ioctl.h @@ -115,6 +115,8 @@ struct pppol2tp_ioc_stats { #define PPPIOCATTCHAN _IOW('t', 56, int) /* attach to ppp channel */ #define PPPIOCGCHAN _IOR('t', 55, int) /* get ppp channel number */ #define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats) +#define PPPIOCBRIDGECHAN _IOW('t', 53, int) /* bridge one channel to another */ +#define PPPIOCUNBRIDGECHAN _IO('t', 54) /* unbridge channel */ #define SIOCGPPPSTATS (SIOCDEVPRIVATE + 0) #define SIOCGPPPVER (SIOCDEVPRIVATE + 1) /* NEVER change this!! */ diff --git a/include/uapi/linux/rfkill.h b/include/uapi/linux/rfkill.h index 2e00dcebebd0..03e8af87b364 100644 --- a/include/uapi/linux/rfkill.h +++ b/include/uapi/linux/rfkill.h @@ -70,12 +70,24 @@ enum rfkill_operation { }; /** + * enum rfkill_hard_block_reasons - hard block reasons + * @RFKILL_HARD_BLOCK_SIGNAL: the hardware rfkill signal is active + * @RFKILL_HARD_BLOCK_NOT_OWNER: the NIC is not owned by the host + */ +enum rfkill_hard_block_reasons { + RFKILL_HARD_BLOCK_SIGNAL = 1 << 0, + RFKILL_HARD_BLOCK_NOT_OWNER = 1 << 1, +}; + +/** * struct rfkill_event - events for userspace on /dev/rfkill * @idx: index of dev rfkill * @type: type of the rfkill struct * @op: operation code * @hard: hard state (0/1) * @soft: soft state (0/1) + * @hard_block_reasons: valid if hard is set. One or several reasons from + * &enum rfkill_hard_block_reasons. * * Structure used for userspace communication on /dev/rfkill, * used for events from the kernel and control to the kernel. @@ -84,7 +96,9 @@ struct rfkill_event { __u32 idx; __u8 type; __u8 op; - __u8 soft, hard; + __u8 soft; + __u8 hard; + __u8 hard_block_reasons; } __attribute__((packed)); /* diff --git a/include/uapi/linux/seg6_local.h b/include/uapi/linux/seg6_local.h index edc138bdc56d..3b39ef1dbb46 100644 --- a/include/uapi/linux/seg6_local.h +++ b/include/uapi/linux/seg6_local.h @@ -26,6 +26,7 @@ enum { SEG6_LOCAL_IIF, SEG6_LOCAL_OIF, SEG6_LOCAL_BPF, + SEG6_LOCAL_VRFTABLE, __SEG6_LOCAL_MAX, }; #define SEG6_LOCAL_MAX (__SEG6_LOCAL_MAX - 1) diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index cfcb10b75483..13ceeb395eb8 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -343,11 +343,15 @@ struct tcp_diag_md5sig { /* setsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) */ +#define TCP_RECEIVE_ZEROCOPY_FLAG_TLB_CLEAN_HINT 0x1 struct tcp_zerocopy_receive { __u64 address; /* in: address of mapping */ __u32 length; /* in/out: number of bytes to map/mapped */ __u32 recv_skip_hint; /* out: amount of bytes to skip */ __u32 inq; /* out: amount of bytes in read queue */ __s32 err; /* out: socket error */ + __u64 copybuf_address; /* in: copybuf address (small reads) */ + __s32 copybuf_len; /* in/out: copybuf bytes avail/used or error */ + __u32 flags; /* in: flags */ }; #endif /* _UAPI_LINUX_TCP_H */ |