diff options
Diffstat (limited to 'include/scsi/osd_sense.h')
| -rw-r--r-- | include/scsi/osd_sense.h | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/include/scsi/osd_sense.h b/include/scsi/osd_sense.h new file mode 100644 index 000000000000..ff9b33c773c7 --- /dev/null +++ b/include/scsi/osd_sense.h @@ -0,0 +1,260 @@ +/* + * osd_sense.h - OSD Related sense handling definitions. + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh <bharrosh@panasas.com> + * Benny Halevy <bhalevy@panasas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + * This file contains types and constants that are defined by the protocol + * Note: All names and symbols are taken from the OSD standard's text. + */ +#ifndef __OSD_SENSE_H__ +#define __OSD_SENSE_H__ + +#include <scsi/osd_protocol.h> + +/* SPC3r23 4.5.6 Sense key and sense code definitions table 27 */ +enum scsi_sense_keys { + scsi_sk_no_sense = 0x0, + scsi_sk_recovered_error = 0x1, + scsi_sk_not_ready = 0x2, + scsi_sk_medium_error = 0x3, + scsi_sk_hardware_error = 0x4, + scsi_sk_illegal_request = 0x5, + scsi_sk_unit_attention = 0x6, + scsi_sk_data_protect = 0x7, + scsi_sk_blank_check = 0x8, + scsi_sk_vendor_specific = 0x9, + scsi_sk_copy_aborted = 0xa, + scsi_sk_aborted_command = 0xb, + scsi_sk_volume_overflow = 0xd, + scsi_sk_miscompare = 0xe, + scsi_sk_reserved = 0xf, +}; + +/* SPC3r23 4.5.6 Sense key and sense code definitions table 28 */ +/* Note: only those which can be returned by an OSD target. Most of + * these errors are taken care of by the generic scsi layer. + */ +enum osd_additional_sense_codes { + scsi_no_additional_sense_information = 0x0000, + scsi_operation_in_progress = 0x0016, + scsi_cleaning_requested = 0x0017, + scsi_lunr_cause_not_reportable = 0x0400, + scsi_logical_unit_is_in_process_of_becoming_ready = 0x0401, + scsi_lunr_initializing_command_required = 0x0402, + scsi_lunr_manual_intervention_required = 0x0403, + scsi_lunr_operation_in_progress = 0x0407, + scsi_lunr_selftest_in_progress = 0x0409, + scsi_luna_asymmetric_access_state_transition = 0x040a, + scsi_luna_target_port_in_standby_state = 0x040b, + scsi_luna_target_port_in_unavailable_state = 0x040c, + scsi_lunr_notify_enable_spinup_required = 0x0411, + scsi_logical_unit_does_not_respond_to_selection = 0x0500, + scsi_logical_unit_communication_failure = 0x0800, + scsi_logical_unit_communication_timeout = 0x0801, + scsi_logical_unit_communication_parity_error = 0x0802, + scsi_error_log_overflow = 0x0a00, + scsi_warning = 0x0b00, + scsi_warning_specified_temperature_exceeded = 0x0b01, + scsi_warning_enclosure_degraded = 0x0b02, + scsi_write_error_unexpected_unsolicited_data = 0x0c0c, + scsi_write_error_not_enough_unsolicited_data = 0x0c0d, + scsi_invalid_information_unit = 0x0e00, + scsi_invalid_field_in_command_information_unit = 0x0e03, + scsi_read_error_failed_retransmission_request = 0x1113, + scsi_parameter_list_length_error = 0x1a00, + scsi_invalid_command_operation_code = 0x2000, + scsi_invalid_field_in_cdb = 0x2400, + osd_security_audit_value_frozen = 0x2404, + osd_security_working_key_frozen = 0x2405, + osd_nonce_not_unique = 0x2406, + osd_nonce_timestamp_out_of_range = 0x2407, + scsi_logical_unit_not_supported = 0x2500, + scsi_invalid_field_in_parameter_list = 0x2600, + scsi_parameter_not_supported = 0x2601, + scsi_parameter_value_invalid = 0x2602, + scsi_invalid_release_of_persistent_reservation = 0x2604, + osd_invalid_dataout_buffer_integrity_check_value = 0x260f, + scsi_not_ready_to_ready_change_medium_may_have_changed = 0x2800, + scsi_power_on_reset_or_bus_device_reset_occurred = 0x2900, + scsi_power_on_occurred = 0x2901, + scsi_scsi_bus_reset_occurred = 0x2902, + scsi_bus_device_reset_function_occurred = 0x2903, + scsi_device_internal_reset = 0x2904, + scsi_transceiver_mode_changed_to_single_ended = 0x2905, + scsi_transceiver_mode_changed_to_lvd = 0x2906, + scsi_i_t_nexus_loss_occurred = 0x2907, + scsi_parameters_changed = 0x2a00, + scsi_mode_parameters_changed = 0x2a01, + scsi_asymmetric_access_state_changed = 0x2a06, + scsi_priority_changed = 0x2a08, + scsi_command_sequence_error = 0x2c00, + scsi_previous_busy_status = 0x2c07, + scsi_previous_task_set_full_status = 0x2c08, + scsi_previous_reservation_conflict_status = 0x2c09, + osd_partition_or_collection_contains_user_objects = 0x2c0a, + scsi_commands_cleared_by_another_initiator = 0x2f00, + scsi_cleaning_failure = 0x3007, + scsi_enclosure_failure = 0x3400, + scsi_enclosure_services_failure = 0x3500, + scsi_unsupported_enclosure_function = 0x3501, + scsi_enclosure_services_unavailable = 0x3502, + scsi_enclosure_services_transfer_failure = 0x3503, + scsi_enclosure_services_transfer_refused = 0x3504, + scsi_enclosure_services_checksum_error = 0x3505, + scsi_rounded_parameter = 0x3700, + osd_read_past_end_of_user_object = 0x3b17, + scsi_logical_unit_has_not_self_configured_yet = 0x3e00, + scsi_logical_unit_failure = 0x3e01, + scsi_timeout_on_logical_unit = 0x3e02, + scsi_logical_unit_failed_selftest = 0x3e03, + scsi_logical_unit_unable_to_update_selftest_log = 0x3e04, + scsi_target_operating_conditions_have_changed = 0x3f00, + scsi_microcode_has_been_changed = 0x3f01, + scsi_inquiry_data_has_changed = 0x3f03, + scsi_echo_buffer_overwritten = 0x3f0f, + scsi_diagnostic_failure_on_component_nn_first = 0x4080, + scsi_diagnostic_failure_on_component_nn_last = 0x40ff, + scsi_message_error = 0x4300, + scsi_internal_target_failure = 0x4400, + scsi_select_or_reselect_failure = 0x4500, + scsi_scsi_parity_error = 0x4700, + scsi_data_phase_crc_error_detected = 0x4701, + scsi_scsi_parity_error_detected_during_st_data_phase = 0x4702, + scsi_asynchronous_information_protection_error_detected = 0x4704, + scsi_protocol_service_crc_error = 0x4705, + scsi_phy_test_function_in_progress = 0x4706, + scsi_invalid_message_error = 0x4900, + scsi_command_phase_error = 0x4a00, + scsi_data_phase_error = 0x4b00, + scsi_logical_unit_failed_self_configuration = 0x4c00, + scsi_overlapped_commands_attempted = 0x4e00, + osd_quota_error = 0x5507, + scsi_failure_prediction_threshold_exceeded = 0x5d00, + scsi_failure_prediction_threshold_exceeded_false = 0x5dff, + scsi_voltage_fault = 0x6500, +}; + +enum scsi_descriptor_types { + scsi_sense_information = 0x0, + scsi_sense_command_specific_information = 0x1, + scsi_sense_key_specific = 0x2, + scsi_sense_field_replaceable_unit = 0x3, + scsi_sense_stream_commands = 0x4, + scsi_sense_block_commands = 0x5, + osd_sense_object_identification = 0x6, + osd_sense_response_integrity_check = 0x7, + osd_sense_attribute_identification = 0x8, + scsi_sense_ata_return = 0x9, + + scsi_sense_Reserved_first = 0x0A, + scsi_sense_Reserved_last = 0x7F, + scsi_sense_Vendor_specific_first = 0x80, + scsi_sense_Vendor_specific_last = 0xFF, +}; + +struct scsi_sense_descriptor { /* for picking into desc type */ + u8 descriptor_type; /* one of enum scsi_descriptor_types */ + u8 additional_length; /* n - 1 */ + u8 data[]; +} __packed; + +/* OSD deploys only scsi descriptor_based sense buffers */ +struct scsi_sense_descriptor_based { +/*0*/ u8 response_code; /* 0x72 or 0x73 */ +/*1*/ u8 sense_key; /* one of enum scsi_sense_keys (4 lower bits) */ +/*2*/ __be16 additional_sense_code; /* enum osd_additional_sense_codes */ +/*4*/ u8 Reserved[3]; +/*7*/ u8 additional_sense_length; /* n - 7 */ +/*8*/ struct scsi_sense_descriptor ssd[0]; /* variable length, 1 or more */ +} __packed; + +/* some descriptors deployed by OSD */ + +/* SPC3r23 4.5.2.3 Command-specific information sense data descriptor */ +/* Note: this is the same for descriptor_type=00 but with type=00 the + * Reserved[0] == 0x80 (ie. bit-7 set) + */ +struct scsi_sense_command_specific_data_descriptor { +/*0*/ u8 descriptor_type; /* (00h/01h) */ +/*1*/ u8 additional_length; /* (0Ah) */ +/*2*/ u8 Reserved[2]; +/*4*/ __be64 information; +} __packed; +/*12*/ + +struct scsi_sense_key_specific_data_descriptor { +/*0*/ u8 descriptor_type; /* (02h) */ +/*1*/ u8 additional_length; /* (06h) */ +/*2*/ u8 Reserved[2]; +/* SKSV, C/D, Reserved (2), BPV, BIT POINTER (3) */ +/*4*/ u8 sksv_cd_bpv_bp; +/*5*/ __be16 value; /* field-pointer/progress-value/retry-count/... */ +/*7*/ u8 Reserved2; +} __packed; +/*8*/ + +/* 4.16.2.1 OSD error identification sense data descriptor - table 52 */ +/* Note: these bits are defined LE order for easy definition, this way the BIT() + * number is the same as in the documentation. Below members at + * osd_sense_identification_data_descriptor are therefore defined __le32. + */ +enum osd_command_functions_bits { + OSD_CFB_COMMAND = BIT(4), + OSD_CFB_CMD_CAP_VERIFIED = BIT(5), + OSD_CFB_VALIDATION = BIT(7), + OSD_CFB_IMP_ST_ATT = BIT(12), + OSD_CFB_SET_ATT = BIT(20), + OSD_CFB_SA_CAP_VERIFIED = BIT(21), + OSD_CFB_GET_ATT = BIT(28), + OSD_CFB_GA_CAP_VERIFIED = BIT(29), +}; + +struct osd_sense_identification_data_descriptor { +/*0*/ u8 descriptor_type; /* (06h) */ +/*1*/ u8 additional_length; /* (1Eh) */ +/*2*/ u8 Reserved[6]; +/*8*/ __le32 not_initiated_functions; /*osd_command_functions_bits*/ +/*12*/ __le32 completed_functions; /*osd_command_functions_bits*/ +/*16*/ __be64 partition_id; +/*24*/ __be64 object_id; +} __packed; +/*32*/ + +struct osd_sense_response_integrity_check_descriptor { +/*0*/ u8 descriptor_type; /* (07h) */ +/*1*/ u8 additional_length; /* (20h) */ +/*2*/ u8 integrity_check_value[32]; /*FIXME: OSDv2_CRYPTO_KEYID_SIZE*/ +} __packed; +/*34*/ + +struct osd_sense_attributes_data_descriptor { +/*0*/ u8 descriptor_type; /* (08h) */ +/*1*/ u8 additional_length; /* (n-2) */ +/*2*/ u8 Reserved[6]; + struct osd_sense_attr { +/*8*/ __be32 attr_page; +/*12*/ __be32 attr_id; +/*16*/ } sense_attrs[0]; /* 1 or more */ +} __packed; +/*variable*/ + +/* Dig into scsi_sk_illegal_request/scsi_invalid_field_in_cdb errors */ + +/*FIXME: Support also field in CAPS*/ +#define OSD_CDB_OFFSET(F) offsetof(struct osd_cdb_head, F) + +enum osdv2_cdb_field_offset { + OSDv1_CFO_STARTING_BYTE = OSD_CDB_OFFSET(v1.start_address), + OSD_CFO_STARTING_BYTE = OSD_CDB_OFFSET(v2.start_address), + OSD_CFO_PARTITION_ID = OSD_CDB_OFFSET(partition), + OSD_CFO_OBJECT_ID = OSD_CDB_OFFSET(object), +}; + +#endif /* ndef __OSD_SENSE_H__ */ |