diff options
Diffstat (limited to 'include/rdma/rdma_cm.h')
| -rw-r--r-- | include/rdma/rdma_cm.h | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h new file mode 100644 index 000000000000..402c63d7226b --- /dev/null +++ b/include/rdma/rdma_cm.h @@ -0,0 +1,256 @@ +/* + * Copyright (c) 2005 Voltaire Inc. All rights reserved. + * Copyright (c) 2005 Intel Corporation. All rights reserved. + * + * This Software is licensed under one of the following licenses: + * + * 1) under the terms of the "Common Public License 1.0" a copy of which is + * available from the Open Source Initiative, see + * http://www.opensource.org/licenses/cpl.php. + * + * 2) under the terms of the "The BSD License" a copy of which is + * available from the Open Source Initiative, see + * http://www.opensource.org/licenses/bsd-license.php. + * + * 3) under the terms of the "GNU General Public License (GPL) Version 2" a + * copy of which is available from the Open Source Initiative, see + * http://www.opensource.org/licenses/gpl-license.php. + * + * Licensee has the right to choose one of the above licenses. + * + * Redistributions of source code must retain the above copyright + * notice and one of the license notices. + * + * Redistributions in binary form must reproduce both the above copyright + * notice, one of the license notices in the documentation + * and/or other materials provided with the distribution. + * + */ + +#if !defined(RDMA_CM_H) +#define RDMA_CM_H + +#include <linux/socket.h> +#include <linux/in6.h> +#include <rdma/ib_addr.h> +#include <rdma/ib_sa.h> + +/* + * Upon receiving a device removal event, users must destroy the associated + * RDMA identifier and release all resources allocated with the device. + */ +enum rdma_cm_event_type { + RDMA_CM_EVENT_ADDR_RESOLVED, + RDMA_CM_EVENT_ADDR_ERROR, + RDMA_CM_EVENT_ROUTE_RESOLVED, + RDMA_CM_EVENT_ROUTE_ERROR, + RDMA_CM_EVENT_CONNECT_REQUEST, + RDMA_CM_EVENT_CONNECT_RESPONSE, + RDMA_CM_EVENT_CONNECT_ERROR, + RDMA_CM_EVENT_UNREACHABLE, + RDMA_CM_EVENT_REJECTED, + RDMA_CM_EVENT_ESTABLISHED, + RDMA_CM_EVENT_DISCONNECTED, + RDMA_CM_EVENT_DEVICE_REMOVAL, +}; + +enum rdma_port_space { + RDMA_PS_SDP = 0x0001, + RDMA_PS_TCP = 0x0106, + RDMA_PS_UDP = 0x0111, + RDMA_PS_SCTP = 0x0183 +}; + +struct rdma_addr { + struct sockaddr src_addr; + u8 src_pad[sizeof(struct sockaddr_in6) - + sizeof(struct sockaddr)]; + struct sockaddr dst_addr; + u8 dst_pad[sizeof(struct sockaddr_in6) - + sizeof(struct sockaddr)]; + struct rdma_dev_addr dev_addr; +}; + +struct rdma_route { + struct rdma_addr addr; + struct ib_sa_path_rec *path_rec; + int num_paths; +}; + +struct rdma_cm_event { + enum rdma_cm_event_type event; + int status; + void *private_data; + u8 private_data_len; +}; + +struct rdma_cm_id; + +/** + * rdma_cm_event_handler - Callback used to report user events. + * + * Notes: Users may not call rdma_destroy_id from this callback to destroy + * the passed in id, or a corresponding listen id. Returning a + * non-zero value from the callback will destroy the passed in id. + */ +typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id, + struct rdma_cm_event *event); + +struct rdma_cm_id { + struct ib_device *device; + void *context; + struct ib_qp *qp; + rdma_cm_event_handler event_handler; + struct rdma_route route; + enum rdma_port_space ps; + u8 port_num; +}; + +/** + * rdma_create_id - Create an RDMA identifier. + * + * @event_handler: User callback invoked to report events associated with the + * returned rdma_id. + * @context: User specified context associated with the id. + * @ps: RDMA port space. + */ +struct rdma_cm_id *rdma_create_id(rdma_cm_event_handler event_handler, + void *context, enum rdma_port_space ps); + +void rdma_destroy_id(struct rdma_cm_id *id); + +/** + * rdma_bind_addr - Bind an RDMA identifier to a source address and + * associated RDMA device, if needed. + * + * @id: RDMA identifier. + * @addr: Local address information. Wildcard values are permitted. + * + * This associates a source address with the RDMA identifier before calling + * rdma_listen. If a specific local address is given, the RDMA identifier will + * be bound to a local RDMA device. + */ +int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr); + +/** + * rdma_resolve_addr - Resolve destination and optional source addresses + * from IP addresses to an RDMA address. If successful, the specified + * rdma_cm_id will be bound to a local device. + * + * @id: RDMA identifier. + * @src_addr: Source address information. This parameter may be NULL. + * @dst_addr: Destination address information. + * @timeout_ms: Time to wait for resolution to complete. + */ +int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, + struct sockaddr *dst_addr, int timeout_ms); + +/** + * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier + * into route information needed to establish a connection. + * + * This is called on the client side of a connection. + * Users must have first called rdma_resolve_addr to resolve a dst_addr + * into an RDMA address before calling this routine. + */ +int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms); + +/** + * rdma_create_qp - Allocate a QP and associate it with the specified RDMA + * identifier. + * + * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA + * through their states. + */ +int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd, + struct ib_qp_init_attr *qp_init_attr); + +/** + * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA + * identifier. + * + * Users must destroy any QP associated with an RDMA identifier before + * destroying the RDMA ID. + */ +void rdma_destroy_qp(struct rdma_cm_id *id); + +/** + * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning + * to a specified QP state. + * @id: Communication identifier associated with the QP attributes to + * initialize. + * @qp_attr: On input, specifies the desired QP state. On output, the + * mandatory and desired optional attributes will be set in order to + * modify the QP to the specified state. + * @qp_attr_mask: The QP attribute mask that may be used to transition the + * QP to the specified state. + * + * Users must set the @qp_attr->qp_state to the desired QP state. This call + * will set all required attributes for the given transition, along with + * known optional attributes. Users may override the attributes returned from + * this call before calling ib_modify_qp. + * + * Users that wish to have their QP automatically transitioned through its + * states can associate a QP with the rdma_cm_id by calling rdma_create_qp(). + */ +int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, + int *qp_attr_mask); + +struct rdma_conn_param { + const void *private_data; + u8 private_data_len; + u8 responder_resources; + u8 initiator_depth; + u8 flow_control; + u8 retry_count; /* ignored when accepting */ + u8 rnr_retry_count; + /* Fields below ignored if a QP is created on the rdma_cm_id. */ + u8 srq; + u32 qp_num; + enum ib_qp_type qp_type; +}; + +/** + * rdma_connect - Initiate an active connection request. + * + * Users must have resolved a route for the rdma_cm_id to connect with + * by having called rdma_resolve_route before calling this routine. + */ +int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); + +/** + * rdma_listen - This function is called by the passive side to + * listen for incoming connection requests. + * + * Users must have bound the rdma_cm_id to a local address by calling + * rdma_bind_addr before calling this routine. + */ +int rdma_listen(struct rdma_cm_id *id, int backlog); + +/** + * rdma_accept - Called to accept a connection request or response. + * @id: Connection identifier associated with the request. + * @conn_param: Information needed to establish the connection. This must be + * provided if accepting a connection request. If accepting a connection + * response, this parameter must be NULL. + * + * Typically, this routine is only called by the listener to accept a connection + * request. It must also be called on the active side of a connection if the + * user is performing their own QP transitions. + */ +int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); + +/** + * rdma_reject - Called to reject a connection request or response. + */ +int rdma_reject(struct rdma_cm_id *id, const void *private_data, + u8 private_data_len); + +/** + * rdma_disconnect - This function disconnects the associated QP and + * transitions it into the error state. + */ +int rdma_disconnect(struct rdma_cm_id *id); + +#endif /* RDMA_CM_H */ + |