diff options
Diffstat (limited to 'include/net')
| -rw-r--r-- | include/net/cfg80211.h | 282 | ||||
| -rw-r--r-- | include/net/mac80211.h | 25 |
2 files changed, 302 insertions, 5 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1fa41b7a1be3..e0c41eb1c860 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -777,8 +777,10 @@ struct cfg80211_crypto_settings { * @probe_resp: probe response template (AP mode only) * @ftm_responder: enable FTM responder functionality; -1 for no change * (which also implies no change in LCI/civic location data) - * @lci: LCI subelement content - * @civicloc: Civic location subelement content + * @lci: Measurement Report element content, starting with Measurement Token + * (measurement type 8) + * @civicloc: Measurement Report element content, starting with Measurement + * Token (measurement type 11) * @lci_len: LCI data length * @civicloc_len: Civic location data length */ @@ -1296,6 +1298,7 @@ struct cfg80211_tid_stats { * @rx_beacon: number of beacons received from this peer * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received * from this peer + * @connected_to_gate: true if mesh STA has a path to mesh gate * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs. @@ -1350,6 +1353,8 @@ struct station_info { u64 rx_beacon; u64 rx_duration; u8 rx_beacon_signal_avg; + u8 connected_to_gate; + struct cfg80211_tid_stats *pertid; s8 ack_signal; s8 avg_ack_signal; @@ -1559,6 +1564,10 @@ struct bss_parameters { * @plink_timeout: If no tx activity is seen from a STA we've established * peering with for longer than this time (in seconds), then remove it * from the STA's list of peers. Default is 30 minutes. + * @dot11MeshConnectedToMeshGate: if set to true, advertise that this STA is + * connected to a mesh gate in mesh formation info. If false, the + * value in mesh formation is determined by the presence of root paths + * in the mesh path table */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -1578,6 +1587,7 @@ struct mesh_config { u16 dot11MeshHWMPperrMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; u8 dot11MeshHWMPRootMode; + bool dot11MeshConnectedToMeshGate; u16 dot11MeshHWMPRannInterval; bool dot11MeshGateAnnouncementProtocol; bool dot11MeshForwarding; @@ -2815,7 +2825,7 @@ struct cfg80211_external_auth_params { }; /** - * cfg80211_ftm_responder_stats - FTM responder statistics + * struct cfg80211_ftm_responder_stats - FTM responder statistics * * @filled: bitflag of flags using the bits of &enum nl80211_ftm_stats to * indicate the relevant values in this struct for them @@ -2849,6 +2859,190 @@ struct cfg80211_ftm_responder_stats { }; /** + * struct cfg80211_pmsr_ftm_result - FTM result + * @failure_reason: if this measurement failed (PMSR status is + * %NL80211_PMSR_STATUS_FAILURE), this gives a more precise + * reason than just "failure" + * @burst_index: if reporting partial results, this is the index + * in [0 .. num_bursts-1] of the burst that's being reported + * @num_ftmr_attempts: number of FTM request frames transmitted + * @num_ftmr_successes: number of FTM request frames acked + * @busy_retry_time: if failure_reason is %NL80211_PMSR_FTM_FAILURE_PEER_BUSY, + * fill this to indicate in how many seconds a retry is deemed possible + * by the responder + * @num_bursts_exp: actual number of bursts exponent negotiated + * @burst_duration: actual burst duration negotiated + * @ftms_per_burst: actual FTMs per burst negotiated + * @lci_len: length of LCI information (if present) + * @civicloc_len: length of civic location information (if present) + * @lci: LCI data (may be %NULL) + * @civicloc: civic location data (may be %NULL) + * @rssi_avg: average RSSI over FTM action frames reported + * @rssi_spread: spread of the RSSI over FTM action frames reported + * @tx_rate: bitrate for transmitted FTM action frame response + * @rx_rate: bitrate of received FTM action frame + * @rtt_avg: average of RTTs measured (must have either this or @dist_avg) + * @rtt_variance: variance of RTTs measured (note that standard deviation is + * the square root of the variance) + * @rtt_spread: spread of the RTTs measured + * @dist_avg: average of distances (mm) measured + * (must have either this or @rtt_avg) + * @dist_variance: variance of distances measured (see also @rtt_variance) + * @dist_spread: spread of distances measured (see also @rtt_spread) + * @num_ftmr_attempts_valid: @num_ftmr_attempts is valid + * @num_ftmr_successes_valid: @num_ftmr_successes is valid + * @rssi_avg_valid: @rssi_avg is valid + * @rssi_spread_valid: @rssi_spread is valid + * @tx_rate_valid: @tx_rate is valid + * @rx_rate_valid: @rx_rate is valid + * @rtt_avg_valid: @rtt_avg is valid + * @rtt_variance_valid: @rtt_variance is valid + * @rtt_spread_valid: @rtt_spread is valid + * @dist_avg_valid: @dist_avg is valid + * @dist_variance_valid: @dist_variance is valid + * @dist_spread_valid: @dist_spread is valid + */ +struct cfg80211_pmsr_ftm_result { + const u8 *lci; + const u8 *civicloc; + unsigned int lci_len; + unsigned int civicloc_len; + enum nl80211_peer_measurement_ftm_failure_reasons failure_reason; + u32 num_ftmr_attempts, num_ftmr_successes; + s16 burst_index; + u8 busy_retry_time; + u8 num_bursts_exp; + u8 burst_duration; + u8 ftms_per_burst; + s32 rssi_avg; + s32 rssi_spread; + struct rate_info tx_rate, rx_rate; + s64 rtt_avg; + s64 rtt_variance; + s64 rtt_spread; + s64 dist_avg; + s64 dist_variance; + s64 dist_spread; + + u16 num_ftmr_attempts_valid:1, + num_ftmr_successes_valid:1, + rssi_avg_valid:1, + rssi_spread_valid:1, + tx_rate_valid:1, + rx_rate_valid:1, + rtt_avg_valid:1, + rtt_variance_valid:1, + rtt_spread_valid:1, + dist_avg_valid:1, + dist_variance_valid:1, + dist_spread_valid:1; +}; + +/** + * struct cfg80211_pmsr_result - peer measurement result + * @addr: address of the peer + * @host_time: host time (use ktime_get_boottime() adjust to the time when the + * measurement was made) + * @ap_tsf: AP's TSF at measurement time + * @status: status of the measurement + * @final: if reporting partial results, mark this as the last one; if not + * reporting partial results always set this flag + * @ap_tsf_valid: indicates the @ap_tsf value is valid + * @type: type of the measurement reported, note that we only support reporting + * one type at a time, but you can report multiple results separately and + * they're all aggregated for userspace. + */ +struct cfg80211_pmsr_result { + u64 host_time, ap_tsf; + enum nl80211_peer_measurement_status status; + + u8 addr[ETH_ALEN]; + + u8 final:1, + ap_tsf_valid:1; + + enum nl80211_peer_measurement_type type; + + union { + struct cfg80211_pmsr_ftm_result ftm; + }; +}; + +/** + * struct cfg80211_pmsr_ftm_request_peer - FTM request data + * @requested: indicates FTM is requested + * @preamble: frame preamble to use + * @burst_period: burst period to use + * @asap: indicates to use ASAP mode + * @num_bursts_exp: number of bursts exponent + * @burst_duration: burst duration + * @ftms_per_burst: number of FTMs per burst + * @ftmr_retries: number of retries for FTM request + * @request_lci: request LCI information + * @request_civicloc: request civic location information + * + * See also nl80211 for the respective attribute documentation. + */ +struct cfg80211_pmsr_ftm_request_peer { + enum nl80211_preamble preamble; + u16 burst_period; + u8 requested:1, + asap:1, + request_lci:1, + request_civicloc:1; + u8 num_bursts_exp; + u8 burst_duration; + u8 ftms_per_burst; + u8 ftmr_retries; +}; + +/** + * struct cfg80211_pmsr_request_peer - peer data for a peer measurement request + * @addr: MAC address + * @chandef: channel to use + * @report_ap_tsf: report the associated AP's TSF + * @ftm: FTM data, see &struct cfg80211_pmsr_ftm_request_peer + */ +struct cfg80211_pmsr_request_peer { + u8 addr[ETH_ALEN]; + struct cfg80211_chan_def chandef; + u8 report_ap_tsf:1; + struct cfg80211_pmsr_ftm_request_peer ftm; +}; + +/** + * struct cfg80211_pmsr_request - peer measurement request + * @cookie: cookie, set by cfg80211 + * @nl_portid: netlink portid - used by cfg80211 + * @drv_data: driver data for this request, if required for aborting, + * not otherwise freed or anything by cfg80211 + * @mac_addr: MAC address used for (randomised) request + * @mac_addr_mask: MAC address mask used for randomisation, bits that + * are 0 in the mask should be randomised, bits that are 1 should + * be taken from the @mac_addr + * @list: used by cfg80211 to hold on to the request + * @timeout: timeout (in milliseconds) for the whole operation, if + * zero it means there's no timeout + * @n_peers: number of peers to do measurements with + * @peers: per-peer measurement request data + */ +struct cfg80211_pmsr_request { + u64 cookie; + void *drv_data; + u32 n_peers; + u32 nl_portid; + + u32 timeout; + + u8 mac_addr[ETH_ALEN] __aligned(2); + u8 mac_addr_mask[ETH_ALEN] __aligned(2); + + struct list_head list; + + struct cfg80211_pmsr_request_peer peers[]; +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -3183,6 +3377,8 @@ struct cfg80211_ftm_responder_stats { * * @get_ftm_responder_stats: Retrieve FTM responder statistics, if available. * Statistics should be cumulative, currently no way to reset is provided. + * @start_pmsr: start peer measurement (e.g. FTM) + * @abort_pmsr: abort peer measurement */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -3492,6 +3688,11 @@ struct cfg80211_ops { int (*get_ftm_responder_stats)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ftm_responder_stats *ftm_stats); + + int (*start_pmsr)(struct wiphy *wiphy, struct wireless_dev *wdev, + struct cfg80211_pmsr_request *request); + void (*abort_pmsr)(struct wiphy *wiphy, struct wireless_dev *wdev, + struct cfg80211_pmsr_request *request); }; /* @@ -3864,6 +4065,42 @@ struct wiphy_iftype_ext_capab { }; /** + * struct cfg80211_pmsr_capabilities - cfg80211 peer measurement capabilities + * @max_peers: maximum number of peers in a single measurement + * @report_ap_tsf: can report assoc AP's TSF for radio resource measurement + * @randomize_mac_addr: can randomize MAC address for measurement + * @ftm.supported: FTM measurement is supported + * @ftm.asap: ASAP-mode is supported + * @ftm.non_asap: non-ASAP-mode is supported + * @ftm.request_lci: can request LCI data + * @ftm.request_civicloc: can request civic location data + * @ftm.preambles: bitmap of preambles supported (&enum nl80211_preamble) + * @ftm.bandwidths: bitmap of bandwidths supported (&enum nl80211_chan_width) + * @ftm.max_bursts_exponent: maximum burst exponent supported + * (set to -1 if not limited; note that setting this will necessarily + * forbid using the value 15 to let the responder pick) + * @ftm.max_ftms_per_burst: maximum FTMs per burst supported (set to 0 if + * not limited) + */ +struct cfg80211_pmsr_capabilities { + unsigned int max_peers; + u8 report_ap_tsf:1, + randomize_mac_addr:1; + + struct { + u32 preambles; + u32 bandwidths; + s8 max_bursts_exponent; + u8 max_ftms_per_burst; + u8 supported:1, + asap:1, + non_asap:1, + request_lci:1, + request_civicloc:1; + } ftm; +}; + +/** * struct wiphy - wireless hardware description * @reg_notifier: the driver's regulatory notification callback, * note that if your driver uses wiphy_apply_custom_regulatory() @@ -4027,6 +4264,8 @@ struct wiphy_iftype_ext_capab { * @txq_limit: configuration of internal TX queue frame limit * @txq_memory_limit: configuration internal TX queue memory limit * @txq_quantum: configuration of internal TX queue scheduler quantum + * + * @pmsr_capa: peer measurement capabilities */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -4163,6 +4402,8 @@ struct wiphy { u32 txq_memory_limit; u32 txq_quantum; + const struct cfg80211_pmsr_capabilities *pmsr_capa; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -4365,6 +4606,9 @@ struct cfg80211_cqm_config; * @owner_nlportid: (private) owner socket port ID * @nl_owner_dead: (private) owner socket went away * @cqm_config: (private) nl80211 RSSI monitor state + * @pmsr_list: (private) peer measurement requests + * @pmsr_lock: (private) peer measurements requests/results lock + * @pmsr_free_wk: (private) peer measurements cleanup work */ struct wireless_dev { struct wiphy *wiphy; @@ -4436,6 +4680,10 @@ struct wireless_dev { #endif struct cfg80211_cqm_config *cqm_config; + + struct list_head pmsr_list; + spinlock_t pmsr_lock; + struct work_struct pmsr_free_wk; }; static inline u8 *wdev_address(struct wireless_dev *wdev) @@ -5328,7 +5576,8 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, * cfg80211 then sends a notification to userspace. */ void cfg80211_notify_new_peer_candidate(struct net_device *dev, - const u8 *macaddr, const u8 *ie, u8 ie_len, gfp_t gfp); + const u8 *macaddr, const u8 *ie, u8 ie_len, + int sig_dbm, gfp_t gfp); /** * DOC: RFkill integration @@ -6630,6 +6879,31 @@ int cfg80211_external_auth_request(struct net_device *netdev, struct cfg80211_external_auth_params *params, gfp_t gfp); +/** + * cfg80211_pmsr_report - report peer measurement result data + * @wdev: the wireless device reporting the measurement + * @req: the original measurement request + * @result: the result data + * @gfp: allocation flags + */ +void cfg80211_pmsr_report(struct wireless_dev *wdev, + struct cfg80211_pmsr_request *req, + struct cfg80211_pmsr_result *result, + gfp_t gfp); + +/** + * cfg80211_pmsr_complete - report peer measurement completed + * @wdev: the wireless device reporting the measurement + * @req: the original measurement request + * @gfp: allocation flags + * + * Report that the entire measurement completed, after this + * the request pointer will no longer be valid. + */ +void cfg80211_pmsr_complete(struct wireless_dev *wdev, + struct cfg80211_pmsr_request *req, + gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 71985e95d2d9..88219cc137c3 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -467,7 +467,7 @@ struct ieee80211_mu_group_data { }; /** - * ieee80211_ftm_responder_params - FTM responder parameters + * struct ieee80211_ftm_responder_params - FTM responder parameters * * @lci: LCI subelement content * @civicloc: CIVIC location subelement content @@ -496,6 +496,8 @@ struct ieee80211_ftm_responder_params { * @uora_ocw_range: UORA element's OCW Range field * @frame_time_rts_th: HE duration RTS threshold, in units of 32us * @he_support: does this BSS support HE + * @twt_requester: does this BSS support TWT requester (relevant for managed + * mode only, set if the AP advertises TWT responder role) * @assoc: association status * @ibss_joined: indicates whether this station is part of an IBSS * or not @@ -594,6 +596,7 @@ struct ieee80211_bss_conf { u8 uora_ocw_range; u16 frame_time_rts_th; bool he_support; + bool twt_requester; /* association related data */ bool assoc, ibss_joined; bool ibss_creator; @@ -3239,6 +3242,11 @@ enum ieee80211_reconfig_type { * When the scan finishes, ieee80211_scan_completed() must be called; * note that it also must be called when the scan cannot finish due to * any error unless this callback returned a negative error code. + * This callback is also allowed to return the special return value 1, + * this indicates that hardware scan isn't desirable right now and a + * software scan should be done instead. A driver wishing to use this + * capability must ensure its (hardware) scan capabilities aren't + * advertised as more capable than mac80211's software scan is. * The callback can sleep. * * @cancel_hw_scan: Ask the low-level tp cancel the active hw scan. @@ -3623,6 +3631,9 @@ enum ieee80211_reconfig_type { * skb is always a real frame, head may or may not be an A-MSDU. * @get_ftm_responder_stats: Retrieve FTM responder statistics, if available. * Statistics should be cumulative, currently no way to reset is provided. + * + * @start_pmsr: start peer measurement (e.g. FTM) (this call can sleep) + * @abort_pmsr: abort peer measurement (this call can sleep) */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -3911,6 +3922,10 @@ struct ieee80211_ops { int (*get_ftm_responder_stats)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_ftm_responder_stats *ftm_stats); + int (*start_pmsr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct cfg80211_pmsr_request *request); + void (*abort_pmsr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct cfg80211_pmsr_request *request); }; /** @@ -6091,6 +6106,14 @@ void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid); * @txq: pointer obtained from station or virtual interface * * Returns the skb if successful, %NULL if no frame was available. + * + * Note that this must be called in an rcu_read_lock() critical section, + * which can only be released after the SKB was handled. Some pointers in + * skb->cb, e.g. the key pointer, are protected by by RCU and thus the + * critical section must persist not just for the duration of this call + * but for the duration of the frame handling. + * However, also note that while in the wake_tx_queue() method, + * rcu_read_lock() is already held. */ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, struct ieee80211_txq *txq); |