diff options
Diffstat (limited to 'include/net/wireless.h')
| -rw-r--r-- | include/net/wireless.h | 472 |
1 files changed, 0 insertions, 472 deletions
diff --git a/include/net/wireless.h b/include/net/wireless.h deleted file mode 100644 index 64a76208580c..000000000000 --- a/include/net/wireless.h +++ /dev/null @@ -1,472 +0,0 @@ -#ifndef __NET_WIRELESS_H -#define __NET_WIRELESS_H - -/* - * 802.11 device management - * - * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> - */ - -#include <linux/netdevice.h> -#include <linux/debugfs.h> -#include <linux/list.h> -#include <linux/ieee80211.h> -#include <net/cfg80211.h> - -/** - * enum ieee80211_band - supported frequency bands - * - * The bands are assigned this way because the supported - * bitrates differ in these bands. - * - * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band - * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) - */ -enum ieee80211_band { - IEEE80211_BAND_2GHZ, - IEEE80211_BAND_5GHZ, - - /* keep last */ - IEEE80211_NUM_BANDS -}; - -/** - * enum ieee80211_channel_flags - channel flags - * - * Channel flags set by the regulatory control code. - * - * @IEEE80211_CHAN_DISABLED: This channel is disabled. - * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted - * on this channel. - * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. - * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. - * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel - * is not permitted. - * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel - * is not permitted. - */ -enum ieee80211_channel_flags { - IEEE80211_CHAN_DISABLED = 1<<0, - IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, - IEEE80211_CHAN_NO_IBSS = 1<<2, - IEEE80211_CHAN_RADAR = 1<<3, - IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4, - IEEE80211_CHAN_NO_FAT_BELOW = 1<<5, -}; - -/** - * struct ieee80211_channel - channel definition - * - * This structure describes a single channel for use - * with cfg80211. - * - * @center_freq: center frequency in MHz - * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz - * @hw_value: hardware-specific value for the channel - * @flags: channel flags from &enum ieee80211_channel_flags. - * @orig_flags: channel flags at registration time, used by regulatory - * code to support devices with additional restrictions - * @band: band this channel belongs to. - * @max_antenna_gain: maximum antenna gain in dBi - * @max_power: maximum transmission power (in dBm) - * @beacon_found: helper to regulatory code to indicate when a beacon - * has been found on this channel. Use regulatory_hint_found_beacon() - * to enable this, this is is useful only on 5 GHz band. - * @orig_mag: internal use - * @orig_mpwr: internal use - */ -struct ieee80211_channel { - enum ieee80211_band band; - u16 center_freq; - u8 max_bandwidth; - u16 hw_value; - u32 flags; - int max_antenna_gain; - int max_power; - bool beacon_found; - u32 orig_flags; - int orig_mag, orig_mpwr; -}; - -/** - * enum ieee80211_rate_flags - rate flags - * - * Hardware/specification flags for rates. These are structured - * in a way that allows using the same bitrate structure for - * different bands/PHY modes. - * - * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short - * preamble on this bitrate; only relevant in 2.4GHz band and - * with CCK rates. - * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate - * when used with 802.11a (on the 5 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate - * when used with 802.11b (on the 2.4 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate - * when used with 802.11g (on the 2.4 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. - */ -enum ieee80211_rate_flags { - IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, - IEEE80211_RATE_MANDATORY_A = 1<<1, - IEEE80211_RATE_MANDATORY_B = 1<<2, - IEEE80211_RATE_MANDATORY_G = 1<<3, - IEEE80211_RATE_ERP_G = 1<<4, -}; - -/** - * struct ieee80211_rate - bitrate definition - * - * This structure describes a bitrate that an 802.11 PHY can - * operate with. The two values @hw_value and @hw_value_short - * are only for driver use when pointers to this structure are - * passed around. - * - * @flags: rate-specific flags - * @bitrate: bitrate in units of 100 Kbps - * @hw_value: driver/hardware value for this rate - * @hw_value_short: driver/hardware value for this rate when - * short preamble is used - */ -struct ieee80211_rate { - u32 flags; - u16 bitrate; - u16 hw_value, hw_value_short; -}; - -/** - * struct ieee80211_sta_ht_cap - STA's HT capabilities - * - * This structure describes most essential parameters needed - * to describe 802.11n HT capabilities for an STA. - * - * @ht_supported: is HT supported by the STA - * @cap: HT capabilities map as described in 802.11n spec - * @ampdu_factor: Maximum A-MPDU length factor - * @ampdu_density: Minimum A-MPDU spacing - * @mcs: Supported MCS rates - */ -struct ieee80211_sta_ht_cap { - u16 cap; /* use IEEE80211_HT_CAP_ */ - bool ht_supported; - u8 ampdu_factor; - u8 ampdu_density; - struct ieee80211_mcs_info mcs; -}; - -/** - * struct ieee80211_supported_band - frequency band definition - * - * This structure describes a frequency band a wiphy - * is able to operate in. - * - * @channels: Array of channels the hardware can operate in - * in this band. - * @band: the band this structure represents - * @n_channels: Number of channels in @channels - * @bitrates: Array of bitrates the hardware can operate with - * in this band. Must be sorted to give a valid "supported - * rates" IE, i.e. CCK rates first, then OFDM. - * @n_bitrates: Number of bitrates in @bitrates - */ -struct ieee80211_supported_band { - struct ieee80211_channel *channels; - struct ieee80211_rate *bitrates; - enum ieee80211_band band; - int n_channels; - int n_bitrates; - struct ieee80211_sta_ht_cap ht_cap; -}; - -/** - * struct wiphy - wireless hardware description - * @idx: the wiphy index assigned to this item - * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> - * @custom_regulatory: tells us the driver for this device - * has its own custom regulatory domain and cannot identify the - * ISO / IEC 3166 alpha2 it belongs to. When this is enabled - * we will disregard the first regulatory hint (when the - * initiator is %REGDOM_SET_BY_CORE). - * @strict_regulatory: tells us the driver for this device will ignore - * regulatory domain settings until it gets its own regulatory domain - * via its regulatory_hint(). After its gets its own regulatory domain - * it will only allow further regulatory domain settings to further - * enhance compliance. For example if channel 13 and 14 are disabled - * by this regulatory domain no user regulatory domain can enable these - * channels at a later time. This can be used for devices which do not - * have calibration information gauranteed for frequencies or settings - * outside of its regulatory domain. - * @reg_notifier: the driver's regulatory notification callback - * @regd: the driver's regulatory domain, if one was requested via - * the regulatory_hint() API. This can be used by the driver - * on the reg_notifier() if it chooses to ignore future - * regulatory domain changes caused by other drivers. - * @signal_type: signal type reported in &struct cfg80211_bss. - */ -struct wiphy { - /* assign these fields before you register the wiphy */ - - /* permanent MAC address */ - u8 perm_addr[ETH_ALEN]; - - /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ - u16 interface_modes; - - bool custom_regulatory; - bool strict_regulatory; - - enum cfg80211_signal_type signal_type; - - int bss_priv_size; - u8 max_scan_ssids; - - /* If multiple wiphys are registered and you're handed e.g. - * a regular netdev with assigned ieee80211_ptr, you won't - * know whether it points to a wiphy your driver has registered - * or not. Assign this to something global to your driver to - * help determine whether you own this wiphy or not. */ - void *privid; - - struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; - - /* Lets us get back the wiphy on the callback */ - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request); - - /* fields below are read-only, assigned by cfg80211 */ - - const struct ieee80211_regdomain *regd; - - /* the item in /sys/class/ieee80211/ points to this, - * you need use set_wiphy_dev() (see below) */ - struct device dev; - - /* dir in debugfs: ieee80211/<wiphyname> */ - struct dentry *debugfsdir; - - char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); -}; - -/** struct wireless_dev - wireless per-netdev state - * - * This structure must be allocated by the driver/stack - * that uses the ieee80211_ptr field in struct net_device - * (this is intentional so it can be allocated along with - * the netdev.) - * - * @wiphy: pointer to hardware description - * @iftype: interface type - */ -struct wireless_dev { - struct wiphy *wiphy; - enum nl80211_iftype iftype; - - /* private to the generic wireless code */ - struct list_head list; - struct net_device *netdev; -}; - -/** - * wiphy_priv - return priv from wiphy - */ -static inline void *wiphy_priv(struct wiphy *wiphy) -{ - BUG_ON(!wiphy); - return &wiphy->priv; -} - -/** - * set_wiphy_dev - set device pointer for wiphy - */ -static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) -{ - wiphy->dev.parent = dev; -} - -/** - * wiphy_dev - get wiphy dev pointer - */ -static inline struct device *wiphy_dev(struct wiphy *wiphy) -{ - return wiphy->dev.parent; -} - -/** - * wiphy_name - get wiphy name - */ -static inline const char *wiphy_name(struct wiphy *wiphy) -{ - return dev_name(&wiphy->dev); -} - -/** - * wdev_priv - return wiphy priv from wireless_dev - */ -static inline void *wdev_priv(struct wireless_dev *wdev) -{ - BUG_ON(!wdev); - return wiphy_priv(wdev->wiphy); -} - -/** - * wiphy_new - create a new wiphy for use with cfg80211 - * - * create a new wiphy and associate the given operations with it. - * @sizeof_priv bytes are allocated for private use. - * - * the returned pointer must be assigned to each netdev's - * ieee80211_ptr for proper operation. - */ -struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv); - -/** - * wiphy_register - register a wiphy with cfg80211 - * - * register the given wiphy - * - * Returns a non-negative wiphy index or a negative error code. - */ -extern int wiphy_register(struct wiphy *wiphy); - -/** - * wiphy_unregister - deregister a wiphy from cfg80211 - * - * unregister a device with the given priv pointer. - * After this call, no more requests can be made with this priv - * pointer, but the call may sleep to wait for an outstanding - * request that is being handled. - */ -extern void wiphy_unregister(struct wiphy *wiphy); - -/** - * wiphy_free - free wiphy - */ -extern void wiphy_free(struct wiphy *wiphy); - -/** - * ieee80211_channel_to_frequency - convert channel number to frequency - */ -extern int ieee80211_channel_to_frequency(int chan); - -/** - * ieee80211_frequency_to_channel - convert frequency to channel number - */ -extern int ieee80211_frequency_to_channel(int freq); - -/* - * Name indirection necessary because the ieee80211 code also has - * a function named "ieee80211_get_channel", so if you include - * cfg80211's header file you get cfg80211's version, if you try - * to include both header files you'll (rightfully!) get a symbol - * clash. - */ -extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, - int freq); -/** - * ieee80211_get_channel - get channel struct from wiphy for specified frequency - */ -static inline struct ieee80211_channel * -ieee80211_get_channel(struct wiphy *wiphy, int freq) -{ - return __ieee80211_get_channel(wiphy, freq); -} - -/** - * ieee80211_get_response_rate - get basic rate for a given rate - * - * @sband: the band to look for rates in - * @basic_rates: bitmap of basic rates - * @bitrate: the bitrate for which to find the basic rate - * - * This function returns the basic rate corresponding to a given - * bitrate, that is the next lower bitrate contained in the basic - * rate map, which is, for this function, given as a bitmap of - * indices of rates in the band's bitrate table. - */ -struct ieee80211_rate * -ieee80211_get_response_rate(struct ieee80211_supported_band *sband, - u32 basic_rates, int bitrate); - -/** - * regulatory_hint - driver hint to the wireless core a regulatory domain - * @wiphy: the wireless device giving the hint (used only for reporting - * conflicts) - * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain - * should be in. If @rd is set this should be NULL. Note that if you - * set this to NULL you should still set rd->alpha2 to some accepted - * alpha2. - * - * Wireless drivers can use this function to hint to the wireless core - * what it believes should be the current regulatory domain by - * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory - * domain should be in or by providing a completely build regulatory domain. - * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried - * for a regulatory domain structure for the respective country. - * - * The wiphy must have been registered to cfg80211 prior to this call. - * For cfg80211 drivers this means you must first use wiphy_register(), - * for mac80211 drivers you must first use ieee80211_register_hw(). - * - * Drivers should check the return value, its possible you can get - * an -ENOMEM. - */ -extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); - -/** - * regulatory_hint_11d - hints a country IE as a regulatory domain - * @wiphy: the wireless device giving the hint (used only for reporting - * conflicts) - * @country_ie: pointer to the country IE - * @country_ie_len: length of the country IE - * - * We will intersect the rd with the what CRDA tells us should apply - * for the alpha2 this country IE belongs to, this prevents APs from - * sending us incorrect or outdated information against a country. - */ -extern void regulatory_hint_11d(struct wiphy *wiphy, - u8 *country_ie, - u8 country_ie_len); -/** - * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain - * @wiphy: the wireless device we want to process the regulatory domain on - * @regd: the custom regulatory domain to use for this wiphy - * - * Drivers can sometimes have custom regulatory domains which do not apply - * to a specific country. Drivers can use this to apply such custom regulatory - * domains. This routine must be called prior to wiphy registration. The - * custom regulatory domain will be trusted completely and as such previous - * default channel settings will be disregarded. If no rule is found for a - * channel on the regulatory domain the channel will be disabled. - */ -extern void wiphy_apply_custom_regulatory( - struct wiphy *wiphy, - const struct ieee80211_regdomain *regd); - -/** - * freq_reg_info - get regulatory information for the given frequency - * @wiphy: the wiphy for which we want to process this rule for - * @center_freq: Frequency in KHz for which we want regulatory information for - * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one - * you can set this to 0. If this frequency is allowed we then set - * this value to the maximum allowed bandwidth. - * @reg_rule: the regulatory rule which we have for this frequency - * - * Use this function to get the regulatory rule for a specific frequency on - * a given wireless device. If the device has a specific regulatory domain - * it wants to follow we respect that unless a country IE has been received - * and processed already. - * - * Returns 0 if it was able to find a valid regulatory rule which does - * apply to the given center_freq otherwise it returns non-zero. It will - * also return -ERANGE if we determine the given center_freq does not even have - * a regulatory rule for a frequency range in the center_freq's band. See - * freq_in_rule_band() for our current definition of a band -- this is purely - * subjective and right now its 802.11 specific. - */ -extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, - const struct ieee80211_reg_rule **reg_rule); - -#endif /* __NET_WIRELESS_H */ |