diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 135 |
1 files changed, 92 insertions, 43 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index b44a2e5321a3..a56bac1e69e0 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -37,6 +37,7 @@ * * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) + * @IEEE80211_NUM_BANDS: number of defined bands */ enum ieee80211_band { IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ, @@ -89,7 +90,7 @@ enum ieee80211_channel_flags { * @max_power: maximum transmission power (in dBm) * @beacon_found: helper to regulatory code to indicate when a beacon * has been found on this channel. Use regulatory_hint_found_beacon() - * to enable this, this is is useful only on 5 GHz band. + * to enable this, this is useful only on 5 GHz band. * @orig_mag: internal use * @orig_mpwr: internal use */ @@ -188,6 +189,7 @@ struct ieee80211_sta_ht_cap { * in this band. Must be sorted to give a valid "supported * rates" IE, i.e. CCK rates first, then OFDM. * @n_bitrates: Number of bitrates in @bitrates + * @ht_cap: HT capabilities in this band */ struct ieee80211_supported_band { struct ieee80211_channel *channels; @@ -225,6 +227,7 @@ struct vif_params { * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used * with the get_key() callback, must be in little endian, * length given by @seq_len. + * @seq_len: length of @seq. */ struct key_params { u8 *key; @@ -237,6 +240,8 @@ struct key_params { /** * enum survey_info_flags - survey information flags * + * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in + * * Used by the driver to indicate which info in &struct survey_info * it has filled in during the get_survey(). */ @@ -247,13 +252,13 @@ enum survey_info_flags { /** * struct survey_info - channel survey response * - * Used by dump_survey() to report back per-channel survey information. - * * @channel: the channel this survey record reports, mandatory * @filled: bitflag of flags from &enum survey_info_flags * @noise: channel noise in dBm. This and all following fields are * optional * + * Used by dump_survey() to report back per-channel survey information. + * * This structure can later be expanded with things like * channel duty cycle etc. */ @@ -288,7 +293,7 @@ struct beacon_parameters { * * @PLINK_ACTION_INVALID: action 0 is reserved * @PLINK_ACTION_OPEN: start mesh peer link establishment - * @PLINK_ACTION_BLOCL: block traffic from this mesh peer + * @PLINK_ACTION_BLOCK: block traffic from this mesh peer */ enum plink_actions { PLINK_ACTION_INVALID, @@ -311,6 +316,8 @@ enum plink_actions { * (bitmask of BIT(NL80211_STA_FLAG_...)) * @listen_interval: listen interval or -1 for no change * @aid: AID or zero for no change + * @plink_action: plink action to take + * @ht_capa: HT capabilities of station */ struct station_parameters { u8 *supported_rates; @@ -448,13 +455,13 @@ enum monitor_flags { * Used by the driver to indicate which info in &struct mpath_info it has filled * in during get_station() or dump_station(). * - * MPATH_INFO_FRAME_QLEN: @frame_qlen filled - * MPATH_INFO_SN: @sn filled - * MPATH_INFO_METRIC: @metric filled - * MPATH_INFO_EXPTIME: @exptime filled - * MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled - * MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled - * MPATH_INFO_FLAGS: @flags filled + * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled + * @MPATH_INFO_SN: @sn filled + * @MPATH_INFO_METRIC: @metric filled + * @MPATH_INFO_EXPTIME: @exptime filled + * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled + * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled + * @MPATH_INFO_FLAGS: @flags filled */ enum mpath_info_flags { MPATH_INFO_FRAME_QLEN = BIT(0), @@ -587,6 +594,7 @@ struct cfg80211_ssid { * @ie_len: length of ie in octets * @wiphy: the wiphy this was for * @dev: the interface + * @aborted: (internal) scan request was notified as aborted */ struct cfg80211_scan_request { struct cfg80211_ssid *ssids; @@ -623,6 +631,7 @@ enum cfg80211_signal_type { * This structure describes a BSS (which may also be a mesh network) * for use in scan results and similar. * + * @channel: channel this BSS is on * @bssid: BSSID of the BSS * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame @@ -826,8 +835,8 @@ struct cfg80211_ibss_params { * @ssid: SSID * @ssid_len: Length of ssid in octets * @auth_type: Authentication type (algorithm) - * @assoc_ie: IEs for association request - * @assoc_ie_len: Length of assoc_ie in octets + * @ie: IEs for association request + * @ie_len: Length of assoc_ie in octets * @privacy: indicates whether privacy-enabled APs should be used * @crypto: crypto settings * @key_len: length of WEP key for shared key authentication @@ -850,10 +859,11 @@ struct cfg80211_connect_params { /** * enum wiphy_params_flags - set_wiphy_params bitfield values - * WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed - * WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed - * WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed - * WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed + * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed + * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed + * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed + * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed + * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed */ enum wiphy_params_flags { WIPHY_PARAM_RETRY_SHORT = 1 << 0, @@ -949,10 +959,16 @@ struct cfg80211_pmksa { * @del_beacon: Remove beacon configuration and stop sending the beacon. * * @add_station: Add a new station. - * * @del_station: Remove a station; @mac may be NULL to remove all stations. - * * @change_station: Modify a given station. + * @get_station: get station information for the station identified by @mac + * @dump_station: dump station callback -- resume dump at index @idx + * + * @add_mpath: add a fixed mesh path + * @del_mpath: delete a given mesh path + * @change_mpath: change a given mesh path + * @get_mpath: get a mesh path for the given parameters + * @dump_mpath: dump mesh path callback -- resume dump at index @idx * * @get_mesh_params: Put the current mesh parameters into *params * @@ -960,8 +976,6 @@ struct cfg80211_pmksa { * The mask is a bitfield which tells us which parameters to * set, and which to leave alone. * - * @set_mesh_cfg: set mesh parameters (by now, just mesh id) - * * @change_bss: Modify parameters for a given BSS. * * @set_txq_params: Set TX queue parameters @@ -1002,6 +1016,8 @@ struct cfg80211_pmksa { * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful * + * @set_wds_peer: set the WDS peer for a WDS interface + * * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting * functions to adjust rfkill hw state * @@ -1019,6 +1035,8 @@ struct cfg80211_pmksa { * * @testmode_cmd: run a test mode command * + * @set_bitrate_mask: set the bitrate mask configuration + * * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac * devices running firmwares capable of generating the (re) association * RSN IE. It allows for faster roaming between WPA2 BSSIDs. @@ -1168,6 +1186,7 @@ struct cfg80211_ops { int (*action)(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_channel *chan, enum nl80211_channel_type channel_type, + bool channel_type_valid, const u8 *buf, size_t len, u64 *cookie); int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, @@ -1230,8 +1249,6 @@ struct mac_address { /** * struct wiphy - wireless hardware description - * @idx: the wiphy index assigned to this item - * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> * @reg_notifier: the driver's regulatory notification callback * @regd: the driver's regulatory domain, if one was requested via * the regulatory_hint() API. This can be used by the driver @@ -1245,7 +1262,7 @@ struct mac_address { * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold); * -1 = fragmentation disabled, only odd values >= 256 used * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled - * @net: the network namespace this wiphy currently lives in + * @_net: the network namespace this wiphy currently lives in * @perm_addr: permanent MAC address of this device * @addr_mask: If the device supports multiple MAC addresses by masking, * set this to a mask with variable bits set to 1, e.g. if the last @@ -1258,6 +1275,28 @@ struct mac_address { * by default for perm_addr. In this case, the mask should be set to * all-zeroes. In this case it is assumed that the device can handle * the same number of arbitrary MAC addresses. + * @debugfsdir: debugfs directory used for this wiphy, will be renamed + * automatically on wiphy renames + * @dev: (virtual) struct device for this wiphy + * @wext: wireless extension handlers + * @priv: driver private data (sized according to wiphy_new() parameter) + * @interface_modes: bitmask of interfaces types valid for this wiphy, + * must be set by driver + * @flags: wiphy flags, see &enum wiphy_flags + * @bss_priv_size: each BSS struct has private data allocated with it, + * this variable determines its size + * @max_scan_ssids: maximum number of SSIDs the device can scan for in + * any given scan + * @max_scan_ie_len: maximum length of user-controlled IEs device can + * add to probe request frames transmitted during a scan, must not + * include fixed IEs like supported rates + * @coverage_class: current coverage class + * @fw_version: firmware version for ethtool reporting + * @hw_version: hardware version for ethtool reporting + * @max_num_pmkids: maximum number of PMKIDs supported by device + * @privid: a pointer that drivers can use to identify if an arbitrary + * wiphy is theirs, e.g. in global notifiers + * @bands: information about bands/channels supported by this device */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -1330,27 +1369,16 @@ struct wiphy { char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); }; -#ifdef CONFIG_NET_NS static inline struct net *wiphy_net(struct wiphy *wiphy) { - return wiphy->_net; + return read_pnet(&wiphy->_net); } static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) { - wiphy->_net = net; -} -#else -static inline struct net *wiphy_net(struct wiphy *wiphy) -{ - return &init_net; + write_pnet(&wiphy->_net, net); } -static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) -{ -} -#endif - /** * wiphy_priv - return priv from wiphy * @@ -1471,13 +1499,14 @@ struct cfg80211_cached_keys; * @ssid: (private) Used by the internal configuration code * @ssid_len: (private) Used by the internal configuration code * @wext: (private) Used by the internal wireless extensions compat code - * @wext_bssid: (private) Used by the internal wireless extensions compat code * @use_4addr: indicates 4addr mode is used on this interface, must be * set by driver (if supported) on add_interface BEFORE registering the * netdev and may otherwise be used by driver read-only, will be update * by cfg80211 on change_interface * @action_registrations: list of registrations for action frames * @action_registrations_lock: lock for the list + * @mtx: mutex used to lock data in this struct + * @cleanup_work: work struct used for cleanup that can't be done directly */ struct wireless_dev { struct wiphy *wiphy; @@ -1551,11 +1580,13 @@ static inline void *wdev_priv(struct wireless_dev *wdev) /** * ieee80211_channel_to_frequency - convert channel number to frequency + * @chan: channel number */ extern int ieee80211_channel_to_frequency(int chan); /** * ieee80211_frequency_to_channel - convert frequency to channel number + * @freq: center frequency */ extern int ieee80211_frequency_to_channel(int freq); @@ -1570,6 +1601,8 @@ extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, int freq); /** * ieee80211_get_channel - get channel struct from wiphy for specified frequency + * @wiphy: the struct wiphy to get the channel for + * @freq: the center frequency of the channel */ static inline struct ieee80211_channel * ieee80211_get_channel(struct wiphy *wiphy, int freq) @@ -1630,9 +1663,6 @@ struct ieee80211_radiotap_vendor_namespaces { * @is_radiotap_ns: indicates whether the current namespace is the default * radiotap namespace or not * - * @overrides: override standard radiotap fields - * @n_overrides: number of overrides - * * @_rtheader: pointer to the radiotap header we are walking through * @_max_length: length of radiotap header in cpu byte ordering * @_arg_index: next argument index @@ -1948,10 +1978,12 @@ int cfg80211_wext_giwap(struct net_device *dev, void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted); /** - * cfg80211_inform_bss - inform cfg80211 of a new BSS + * cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame * * @wiphy: the wiphy reporting the BSS - * @bss: the found BSS + * @channel: The channel the frame was received on + * @mgmt: the management frame (probe response or beacon) + * @len: length of the management frame * @signal: the signal strength, type depends on the wiphy's signal_type * @gfp: context flags * @@ -1964,6 +1996,23 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, struct ieee80211_mgmt *mgmt, size_t len, s32 signal, gfp_t gfp); +/** + * cfg80211_inform_bss - inform cfg80211 of a new BSS + * + * @wiphy: the wiphy reporting the BSS + * @channel: The channel the frame was received on + * @bssid: the BSSID of the BSS + * @timestamp: the TSF timestamp sent by the peer + * @capability: the capability field sent by the peer + * @beacon_interval: the beacon interval announced by the peer + * @ie: additional IEs sent by the peer + * @ielen: length of the additional IEs + * @signal: the signal strength, type depends on the wiphy's signal_type + * @gfp: context flags + * + * This informs cfg80211 that BSS information was found and + * the BSS should be updated/added. + */ struct cfg80211_bss* cfg80211_inform_bss(struct wiphy *wiphy, struct ieee80211_channel *channel, |