diff options
Diffstat (limited to 'include/media')
| -rw-r--r-- | include/media/h264-ctrls.h | 195 |
1 files changed, 185 insertions, 10 deletions
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h index ec4799154438..893e21354a9b 100644 --- a/include/media/h264-ctrls.h +++ b/include/media/h264-ctrls.h @@ -46,11 +46,38 @@ #define V4L2_CTRL_TYPE_H264_DECODE_PARAMS 0x0114 #define V4L2_CTRL_TYPE_H264_PRED_WEIGHTS 0x0115 +/** + * enum v4l2_mpeg_video_h264_decode_mode - Decoding mode + * + * @V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED: indicates that decoding + * is performed one slice at a time. In this mode, + * V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS must contain the parsed slice + * parameters and the OUTPUT buffer must contain a single slice. + * V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF feature is used + * in order to support multislice frames. + * @V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED: indicates that + * decoding is performed per frame. The OUTPUT buffer must contain + * all slices and also both fields. This mode is typically supported + * by device drivers that are able to parse the slice(s) header(s) + * in hardware. When this mode is selected, + * V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS is not used. + */ enum v4l2_mpeg_video_h264_decode_mode { V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED, V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED, }; +/** + * enum v4l2_mpeg_video_h264_start_code - Start code + * + * @V4L2_MPEG_VIDEO_H264_START_CODE_NONE: slices are passed + * to the driver without any start code. + * @V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B: slices are passed + * to the driver with an Annex B start code prefix + * (legal start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001). + * This mode is typically supported by device drivers that parse + * the start code in hardware. + */ enum v4l2_mpeg_video_h264_start_code { V4L2_MPEG_VIDEO_H264_START_CODE_NONE, V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, @@ -71,6 +98,31 @@ enum v4l2_mpeg_video_h264_start_code { #define V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD 0x20 #define V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE 0x40 +/** + * struct v4l2_ctrl_h264_sps - H264 sequence parameter set + * + * All the members on this sequence parameter set structure match the + * sequence parameter set syntax as specified by the H264 specification. + * + * @profile_idc: see H264 specification. + * @constraint_set_flags: see H264 specification. + * @level_idc: see H264 specification. + * @seq_parameter_set_id: see H264 specification. + * @chroma_format_idc: see H264 specification. + * @bit_depth_luma_minus8: see H264 specification. + * @bit_depth_chroma_minus8: see H264 specification. + * @log2_max_frame_num_minus4: see H264 specification. + * @pic_order_cnt_type: see H264 specification. + * @log2_max_pic_order_cnt_lsb_minus4: see H264 specification. + * @max_num_ref_frames: see H264 specification. + * @num_ref_frames_in_pic_order_cnt_cycle: see H264 specification. + * @offset_for_ref_frame: see H264 specification. + * @offset_for_non_ref_pic: see H264 specification. + * @offset_for_top_to_bottom_field: see H264 specification. + * @pic_width_in_mbs_minus1: see H264 specification. + * @pic_height_in_map_units_minus1: see H264 specification. + * @flags: see V4L2_H264_SPS_FLAG_{}. + */ struct v4l2_ctrl_h264_sps { __u8 profile_idc; __u8 constraint_set_flags; @@ -101,6 +153,31 @@ struct v4l2_ctrl_h264_sps { #define V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE 0x0040 #define V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT 0x0080 +/** + * struct v4l2_ctrl_h264_pps - H264 picture parameter set + * + * Except where noted, all the members on this picture parameter set + * structure match the sequence parameter set syntax as specified + * by the H264 specification. + * + * In particular, V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT flag + * has a specific meaning. This flag should be set if a non-flat + * scaling matrix applies to the picture. In this case, applications + * are expected to use V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX, + * to pass the values of the non-flat matrices. + * + * @pic_parameter_set_id: see H264 specification. + * @seq_parameter_set_id: see H264 specification. + * @num_slice_groups_minus1: see H264 specification. + * @num_ref_idx_l0_default_active_minus1: see H264 specification. + * @num_ref_idx_l1_default_active_minus1: see H264 specification. + * @weighted_bipred_idc: see H264 specification. + * @pic_init_qp_minus26: see H264 specification. + * @pic_init_qs_minus26: see H264 specification. + * @chroma_qp_index_offset: see H264 specification. + * @second_chroma_qp_index_offset: see H264 specification. + * @flags: see V4L2_H264_PPS_FLAG_{}. + */ struct v4l2_ctrl_h264_pps { __u8 pic_parameter_set_id; __u8 seq_parameter_set_id; @@ -115,6 +192,23 @@ struct v4l2_ctrl_h264_pps { __u16 flags; }; +/** + * struct v4l2_ctrl_h264_scaling_matrix - H264 scaling matrices + * + * @scaling_list_4x4: scaling matrix after applying the inverse + * scanning process. Expected list order is Intra Y, Intra Cb, + * Intra Cr, Inter Y, Inter Cb, Inter Cr. The values on each + * scaling list are expected in raster scan order. + * @scaling_list_8x8: scaling matrix after applying the inverse + * scanning process. Expected list order is Intra Y, Inter Y, + * Intra Cb, Inter Cb, Intra Cr, Inter Cr. The values on each + * scaling list are expected in raster scan order. + * + * Note that the list order is different for the 4x4 and 8x8 + * matrices as per the H264 specification, see table 7-2 "Assignment + * of mnemonic names to scaling list indices and specification of + * fall-back rule". + */ struct v4l2_ctrl_h264_scaling_matrix { __u8 scaling_list_4x4[6][16]; __u8 scaling_list_8x8[6][64]; @@ -134,6 +228,16 @@ struct v4l2_h264_weight_factors { ((pps)->weighted_bipred_idc == 1 && \ (slice)->slice_type == V4L2_H264_SLICE_TYPE_B)) +/** + * struct v4l2_ctrl_h264_pred_weights - Prediction weight table + * + * Prediction weight table, which matches the syntax specified + * by the H264 specification. + * + * @luma_log2_weight_denom: see H264 specification. + * @chroma_log2_weight_denom: see H264 specification. + * @weight_factors: luma and chroma weight factors. + */ struct v4l2_ctrl_h264_pred_weights { __u16 luma_log2_weight_denom; __u16 chroma_log2_weight_denom; @@ -153,19 +257,55 @@ struct v4l2_ctrl_h264_pred_weights { #define V4L2_H264_BOTTOM_FIELD_REF 0x2 #define V4L2_H264_FRAME_REF 0x3 +/** + * struct v4l2_h264_reference - H264 picture reference + * + * @fields: indicates how the picture is referenced. + * Valid values are V4L2_H264_{}_REF. + * @index: index into v4l2_ctrl_h264_decode_params.dpb[]. + */ struct v4l2_h264_reference { __u8 fields; - - /* Index into v4l2_ctrl_h264_decode_params.dpb[] */ __u8 index; }; +/** + * struct v4l2_ctrl_h264_slice_params - H264 slice parameters + * + * This structure holds the H264 syntax elements that are specified + * as non-invariant for the slices in a given frame. + * + * Slice invariant syntax elements are contained in struct + * v4l2_ctrl_h264_decode_params. This is done to reduce the API surface + * on frame-based decoders, where slice header parsing is done by the + * hardware. + * + * Slice invariant syntax elements are specified in specification section + * "7.4.3 Slice header semantics". + * + * Except where noted, the members on this struct match the slice header syntax. + * + * @header_bit_size: offset in bits to slice_data() from the beginning of this slice. + * @first_mb_in_slice: see H264 specification. + * @slice_type: see H264 specification. + * @colour_plane_id: see H264 specification. + * @redundant_pic_cnt: see H264 specification. + * @cabac_init_idc: see H264 specification. + * @slice_qp_delta: see H264 specification. + * @slice_qs_delta: see H264 specification. + * @disable_deblocking_filter_idc: see H264 specification. + * @slice_alpha_c0_offset_div2: see H264 specification. + * @slice_beta_offset_div2: see H264 specification. + * @num_ref_idx_l0_active_minus1: see H264 specification. + * @num_ref_idx_l1_active_minus1: see H264 specification. + * @reserved: padding field. Should be zeroed by applications. + * @ref_pic_list0: reference picture list 0 after applying the per-slice modifications. + * @ref_pic_list1: reference picture list 1 after applying the per-slice modifications. + * @flags: see V4L2_H264_SLICE_FLAG_{}. + */ struct v4l2_ctrl_h264_slice_params { - /* Offset in bits to slice_data() from the beginning of this slice. */ __u32 header_bit_size; - __u32 first_mb_in_slice; - __u8 slice_type; __u8 colour_plane_id; __u8 redundant_pic_cnt; @@ -191,22 +331,59 @@ struct v4l2_ctrl_h264_slice_params { #define V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM 0x04 #define V4L2_H264_DPB_ENTRY_FLAG_FIELD 0x08 +/** + * struct v4l2_h264_dpb_entry - H264 decoded picture buffer entry + * + * @reference_ts: timestamp of the V4L2 capture buffer to use as reference. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @pic_num: matches PicNum variable assigned during the reference + * picture lists construction process. + * @frame_num: frame identifier which matches frame_num syntax element. + * @fields: indicates how the DPB entry is referenced. Valid values are + * V4L2_H264_{}_REF. + * @reserved: padding field. Should be zeroed by applications. + * @top_field_order_cnt: matches TopFieldOrderCnt picture value. + * @bottom_field_order_cnt: matches BottomFieldOrderCnt picture value. + * Note that picture field is indicated by v4l2_buffer.field. + * @flags: see V4L2_H264_DPB_ENTRY_FLAG_{}. + */ struct v4l2_h264_dpb_entry { __u64 reference_ts; __u32 pic_num; __u16 frame_num; __u8 fields; __u8 reserved[5]; - /* Note that field is indicated by v4l2_buffer.field */ __s32 top_field_order_cnt; __s32 bottom_field_order_cnt; - __u32 flags; /* V4L2_H264_DPB_ENTRY_FLAG_* */ + __u32 flags; }; #define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC 0x01 #define V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC 0x02 #define V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD 0x04 +/** + * struct v4l2_ctrl_h264_decode_params - H264 decoding parameters + * + * @dpb: decoded picture buffer. + * @nal_ref_idc: slice header syntax element. + * @frame_num: slice header syntax element. + * @top_field_order_cnt: matches TopFieldOrderCnt picture value. + * @bottom_field_order_cnt: matches BottomFieldOrderCnt picture value. + * Note that picture field is indicated by v4l2_buffer.field. + * @idr_pic_id: slice header syntax element. + * @pic_order_cnt_lsb: slice header syntax element. + * @delta_pic_order_cnt_bottom: slice header syntax element. + * @delta_pic_order_cnt0: slice header syntax element. + * @delta_pic_order_cnt1: slice header syntax element. + * @dec_ref_pic_marking_bit_size: size in bits of dec_ref_pic_marking() + * syntax element. + * @pic_order_cnt_bit_size: size in bits of pic order count syntax. + * @slice_group_change_cycle: slice header syntax element. + * @reserved: padding field. Should be zeroed by applications. + * @flags: see V4L2_H264_DECODE_PARAM_FLAG_{}. + */ struct v4l2_ctrl_h264_decode_params { struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES]; __u16 nal_ref_idc; @@ -218,14 +395,12 @@ struct v4l2_ctrl_h264_decode_params { __s32 delta_pic_order_cnt_bottom; __s32 delta_pic_order_cnt0; __s32 delta_pic_order_cnt1; - /* Size in bits of dec_ref_pic_marking() syntax element. */ __u32 dec_ref_pic_marking_bit_size; - /* Size in bits of pic order count syntax. */ __u32 pic_order_cnt_bit_size; __u32 slice_group_change_cycle; __u32 reserved; - __u32 flags; /* V4L2_H264_DECODE_PARAM_FLAG_* */ + __u32 flags; }; #endif |