diff options
Diffstat (limited to 'include/linux/thermal.h')
| -rw-r--r-- | include/linux/thermal.h | 97 |
1 files changed, 88 insertions, 9 deletions
diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 5eac316490ea..037e9df2f610 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -40,6 +40,9 @@ /* No upper/lower limit requirement */ #define THERMAL_NO_LIMIT ((u32)~0) +/* Default weight of a bound cooling device */ +#define THERMAL_WEIGHT_DEFAULT 0 + /* Unit conversion macros */ #define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ ((long)t-2732+5)/10 : ((long)t-2732-5)/10) @@ -56,10 +59,13 @@ #define DEFAULT_THERMAL_GOVERNOR "fair_share" #elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE) #define DEFAULT_THERMAL_GOVERNOR "user_space" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR) +#define DEFAULT_THERMAL_GOVERNOR "power_allocator" #endif struct thermal_zone_device; struct thermal_cooling_device; +struct thermal_instance; enum thermal_device_mode { THERMAL_DEVICE_DISABLED = 0, @@ -113,6 +119,12 @@ struct thermal_cooling_device_ops { int (*get_max_state) (struct thermal_cooling_device *, unsigned long *); int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *); int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); + int (*get_requested_power)(struct thermal_cooling_device *, + struct thermal_zone_device *, u32 *); + int (*state2power)(struct thermal_cooling_device *, + struct thermal_zone_device *, unsigned long, u32 *); + int (*power2state)(struct thermal_cooling_device *, + struct thermal_zone_device *, u32, unsigned long *); }; struct thermal_cooling_device { @@ -144,8 +156,7 @@ struct thermal_attr { * @devdata: private pointer for device private data * @trips: number of trip points the thermal zone supports * @passive_delay: number of milliseconds to wait between polls when - * performing passive cooling. Currenty only used by the - * step-wise governor + * performing passive cooling. * @polling_delay: number of milliseconds to wait between polls when * checking whether trip points have been crossed (0 for * interrupt driven systems) @@ -155,13 +166,13 @@ struct thermal_attr { * @last_temperature: previous temperature read * @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION * @passive: 1 if you've crossed a passive trip point, 0 otherwise. - * Currenty only used by the step-wise governor. * @forced_passive: If > 0, temperature at which to switch on all ACPI * processor cooling devices. Currently only used by the * step-wise governor. * @ops: operations this &thermal_zone_device supports * @tzp: thermal zone parameters * @governor: pointer to the governor for this thermal zone + * @governor_data: private pointer for governor data * @thermal_instances: list of &struct thermal_instance of this thermal zone * @idr: &struct idr to generate unique id for this zone's cooling * devices @@ -186,8 +197,9 @@ struct thermal_zone_device { int passive; unsigned int forced_passive; struct thermal_zone_device_ops *ops; - const struct thermal_zone_params *tzp; + struct thermal_zone_params *tzp; struct thermal_governor *governor; + void *governor_data; struct list_head thermal_instances; struct idr idr; struct mutex lock; @@ -198,12 +210,19 @@ struct thermal_zone_device { /** * struct thermal_governor - structure that holds thermal governor information * @name: name of the governor + * @bind_to_tz: callback called when binding to a thermal zone. If it + * returns 0, the governor is bound to the thermal zone, + * otherwise it fails. + * @unbind_from_tz: callback called when a governor is unbound from a + * thermal zone. * @throttle: callback called for every trip point even if temperature is * below the trip point temperature * @governor_list: node in thermal_governor_list (in thermal_core.c) */ struct thermal_governor { char name[THERMAL_NAME_LENGTH]; + int (*bind_to_tz)(struct thermal_zone_device *tz); + void (*unbind_from_tz)(struct thermal_zone_device *tz); int (*throttle)(struct thermal_zone_device *tz, int trip); struct list_head governor_list; }; @@ -214,9 +233,12 @@ struct thermal_bind_params { /* * This is a measure of 'how effectively these devices can - * cool 'this' thermal zone. The shall be determined by platform - * characterization. This is on a 'percentage' scale. - * See Documentation/thermal/sysfs-api.txt for more information. + * cool 'this' thermal zone. It shall be determined by + * platform characterization. This value is relative to the + * rest of the weights so a cooling device whose weight is + * double that of another cooling device is twice as + * effective. See Documentation/thermal/sysfs-api.txt for more + * information. */ int weight; @@ -253,6 +275,44 @@ struct thermal_zone_params { int num_tbps; /* Number of tbp entries */ struct thermal_bind_params *tbp; + + /* + * Sustainable power (heat) that this thermal zone can dissipate in + * mW + */ + u32 sustainable_power; + + /* + * Proportional parameter of the PID controller when + * overshooting (i.e., when temperature is below the target) + */ + s32 k_po; + + /* + * Proportional parameter of the PID controller when + * undershooting + */ + s32 k_pu; + + /* Integral parameter of the PID controller */ + s32 k_i; + + /* Derivative parameter of the PID controller */ + s32 k_d; + + /* threshold below which the error is no longer accumulated */ + s32 integral_cutoff; + + /* + * @slope: slope of a linear temperature adjustment curve. + * Used by thermal zone drivers. + */ + int slope; + /* + * @offset: offset of a linear temperature adjustment curve. + * Used by thermal zone drivers (default 0). + */ + int offset; }; struct thermal_genl_event { @@ -316,14 +376,25 @@ void thermal_zone_of_sensor_unregister(struct device *dev, #endif #if IS_ENABLED(CONFIG_THERMAL) +static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) +{ + return cdev->ops->get_requested_power && cdev->ops->state2power && + cdev->ops->power2state; +} + +int power_actor_get_max_power(struct thermal_cooling_device *, + struct thermal_zone_device *tz, u32 *max_power); +int power_actor_set_power(struct thermal_cooling_device *, + struct thermal_instance *, u32); struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void *, struct thermal_zone_device_ops *, - const struct thermal_zone_params *, int, int); + struct thermal_zone_params *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *, - unsigned long, unsigned long); + unsigned long, unsigned long, + unsigned int); int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); @@ -343,6 +414,14 @@ struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, void thermal_cdev_update(struct thermal_cooling_device *); void thermal_notify_framework(struct thermal_zone_device *, int); #else +static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) +{ return false; } +static inline int power_actor_get_max_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *max_power) +{ return 0; } +static inline int power_actor_set_power(struct thermal_cooling_device *cdev, + struct thermal_instance *tz, u32 power) +{ return 0; } static inline struct thermal_zone_device *thermal_zone_device_register( const char *type, int trips, int mask, void *devdata, struct thermal_zone_device_ops *ops, |