diff options
Diffstat (limited to 'include/linux/mfd/dm355evm_msp.h')
| -rw-r--r-- | include/linux/mfd/dm355evm_msp.h | 79 |
1 files changed, 0 insertions, 79 deletions
diff --git a/include/linux/mfd/dm355evm_msp.h b/include/linux/mfd/dm355evm_msp.h deleted file mode 100644 index 372470350fab..000000000000 --- a/include/linux/mfd/dm355evm_msp.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * dm355evm_msp.h - support MSP430 microcontroller on DM355EVM board - */ -#ifndef __LINUX_I2C_DM355EVM_MSP -#define __LINUX_I2C_DM355EVM_MSP - -/* - * Written against Spectrum's writeup for the A4 firmware revision, - * and tweaked to match source and rev D2 schematics by removing CPLD - * and NOR flash hooks (which were last appropriate in rev B boards). - * - * Note that the firmware supports a flavor of write posting ... to be - * sure a write completes, issue another read or write. - */ - -/* utilities to access "registers" emulated by msp430 firmware */ -extern int dm355evm_msp_write(u8 value, u8 reg); -extern int dm355evm_msp_read(u8 reg); - - -/* command/control registers */ -#define DM355EVM_MSP_COMMAND 0x00 -# define MSP_COMMAND_NULL 0 -# define MSP_COMMAND_RESET_COLD 1 -# define MSP_COMMAND_RESET_WARM 2 -# define MSP_COMMAND_RESET_WARM_I 3 -# define MSP_COMMAND_POWEROFF 4 -# define MSP_COMMAND_IR_REINIT 5 -#define DM355EVM_MSP_STATUS 0x01 -# define MSP_STATUS_BAD_OFFSET BIT(0) -# define MSP_STATUS_BAD_COMMAND BIT(1) -# define MSP_STATUS_POWER_ERROR BIT(2) -# define MSP_STATUS_RXBUF_OVERRUN BIT(3) -#define DM355EVM_MSP_RESET 0x02 /* 0 bits == in reset */ -# define MSP_RESET_DC5 BIT(0) -# define MSP_RESET_TVP5154 BIT(2) -# define MSP_RESET_IMAGER BIT(3) -# define MSP_RESET_ETHERNET BIT(4) -# define MSP_RESET_SYS BIT(5) -# define MSP_RESET_AIC33 BIT(7) - -/* GPIO registers ... bit patterns mostly match the source MSP ports */ -#define DM355EVM_MSP_LED 0x03 /* active low (MSP P4) */ -#define DM355EVM_MSP_SWITCH1 0x04 /* (MSP P5, masked) */ -# define MSP_SWITCH1_SW6_1 BIT(0) -# define MSP_SWITCH1_SW6_2 BIT(1) -# define MSP_SWITCH1_SW6_3 BIT(2) -# define MSP_SWITCH1_SW6_4 BIT(3) -# define MSP_SWITCH1_J1 BIT(4) /* NTSC/PAL */ -# define MSP_SWITCH1_MSP_INT BIT(5) /* active low */ -#define DM355EVM_MSP_SWITCH2 0x05 /* (MSP P6, masked) */ -# define MSP_SWITCH2_SW10 BIT(3) -# define MSP_SWITCH2_SW11 BIT(4) -# define MSP_SWITCH2_SW12 BIT(5) -# define MSP_SWITCH2_SW13 BIT(6) -# define MSP_SWITCH2_SW14 BIT(7) -#define DM355EVM_MSP_SDMMC 0x06 /* (MSP P2, masked) */ -# define MSP_SDMMC_0_WP BIT(1) -# define MSP_SDMMC_0_CD BIT(2) /* active low */ -# define MSP_SDMMC_1_WP BIT(3) -# define MSP_SDMMC_1_CD BIT(4) /* active low */ -#define DM355EVM_MSP_FIRMREV 0x07 /* not a GPIO (out of order) */ -#define DM355EVM_MSP_VIDEO_IN 0x08 /* (MSP P3, masked) */ -# define MSP_VIDEO_IMAGER BIT(7) /* low == tvp5146 */ - -/* power supply registers are currently omitted */ - -/* RTC registers */ -#define DM355EVM_MSP_RTC_0 0x12 /* LSB */ -#define DM355EVM_MSP_RTC_1 0x13 -#define DM355EVM_MSP_RTC_2 0x14 -#define DM355EVM_MSP_RTC_3 0x15 /* MSB */ - -/* input event queue registers; code == ((HIGH << 8) | LOW) */ -#define DM355EVM_MSP_INPUT_COUNT 0x16 /* decrement by reading LOW */ -#define DM355EVM_MSP_INPUT_HIGH 0x17 -#define DM355EVM_MSP_INPUT_LOW 0x18 - -#endif /* __LINUX_I2C_DM355EVM_MSP */ |