diff options
Diffstat (limited to 'include/dt-bindings/usb/pd.h')
| -rw-r--r-- | include/dt-bindings/usb/pd.h | 89 |
1 files changed, 76 insertions, 13 deletions
diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h index fef3ef65967f..e6526b138174 100644 --- a/include/dt-bindings/usb/pd.h +++ b/include/dt-bindings/usb/pd.h @@ -106,6 +106,10 @@ * <20:16> :: Reserved, Shall be set to zero * <15:0> :: USB-IF assigned VID for this cable vendor */ + +/* PD Rev2.0 definition */ +#define IDH_PTYPE_UNDEF 0 + /* SOP Product Type (UFP) */ #define IDH_PTYPE_NOT_UFP 0 #define IDH_PTYPE_HUB 1 @@ -163,10 +167,10 @@ #define UFP_VDO_VER1_2 2 /* Device Capability */ -#define DEV_USB2_CAPABLE BIT(0) -#define DEV_USB2_BILLBOARD BIT(1) -#define DEV_USB3_CAPABLE BIT(2) -#define DEV_USB4_CAPABLE BIT(3) +#define DEV_USB2_CAPABLE (1 << 0) +#define DEV_USB2_BILLBOARD (1 << 1) +#define DEV_USB3_CAPABLE (1 << 2) +#define DEV_USB4_CAPABLE (1 << 3) /* Connector Type */ #define UFP_RECEPTACLE 2 @@ -191,9 +195,9 @@ /* Alternate Modes */ #define UFP_ALTMODE_NOT_SUPP 0 -#define UFP_ALTMODE_TBT3 BIT(0) -#define UFP_ALTMODE_RECFG BIT(1) -#define UFP_ALTMODE_NO_RECFG BIT(2) +#define UFP_ALTMODE_TBT3 (1 << 0) +#define UFP_ALTMODE_RECFG (1 << 1) +#define UFP_ALTMODE_NO_RECFG (1 << 2) /* USB Highest Speed */ #define UFP_USB2_ONLY 0 @@ -217,9 +221,9 @@ * <4:0> :: Port number */ #define DFP_VDO_VER1_1 1 -#define HOST_USB2_CAPABLE BIT(0) -#define HOST_USB3_CAPABLE BIT(1) -#define HOST_USB4_CAPABLE BIT(2) +#define HOST_USB2_CAPABLE (1 << 0) +#define HOST_USB3_CAPABLE (1 << 1) +#define HOST_USB4_CAPABLE (1 << 2) #define DFP_RECEPTACLE 2 #define DFP_CAPTIVE 3 @@ -228,7 +232,25 @@ | ((pnum) & 0x1f)) /* - * Passive Cable VDO + * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0) + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:20> :: Reserved, Shall be set to zero + * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive) + * <17> :: Reserved, Shall be set to zero + * <16:13> :: cable latency (0001 == <10ns(~1m length)) + * <12:11> :: cable termination type (11b == both ends active VCONN req) + * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) + * <9> :: SSTX2 Directionality support + * <8> :: SSRX1 Directionality support + * <7> :: SSRX2 Directionality support + * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) + * <4> :: Vbus through cable (0b == no, 1b == yes) + * <3> :: SOP" controller present? (0b == no, 1b == yes) + * <2:0> :: USB SS Signaling support + * + * Passive Cable VDO (PD Rev3.0+) * --------- * <31:28> :: Cable HW version * <27:24> :: Cable FW version @@ -244,7 +266,7 @@ * <4:3> :: Reserved, Shall be set to zero * <2:0> :: USB highest speed * - * Active Cable VDO 1 + * Active Cable VDO 1 (PD Rev3.0+) * --------- * <31:28> :: Cable HW version * <27:24> :: Cable FW version @@ -266,7 +288,9 @@ #define CABLE_VDO_VER1_0 0 #define CABLE_VDO_VER1_3 3 -/* Connector Type */ +/* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */ +#define CABLE_ATYPE 0 +#define CABLE_BTYPE 1 #define CABLE_CTYPE 2 #define CABLE_CAPTIVE 3 @@ -303,12 +327,22 @@ #define CABLE_CURR_3A 1 #define CABLE_CURR_5A 2 +/* USB SuperSpeed Signaling Support (PD Rev2.0) */ +#define CABLE_USBSS_U2_ONLY 0 +#define CABLE_USBSS_U31_GEN1 1 +#define CABLE_USBSS_U31_GEN2 2 + /* USB Highest Speed */ #define CABLE_USB2_ONLY 0 #define CABLE_USB32_GEN1 1 #define CABLE_USB32_4_GEN2 2 #define CABLE_USB4_GEN3 3 +#define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \ + (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \ + | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10 \ + | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5 \ + | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7)) #define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd) \ (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ @@ -374,6 +408,35 @@ | (iso) << 2 | (gen)) /* + * AMA VDO (PD Rev2.0) + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:12> :: Reserved, Shall be set to zero + * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) + * <10> :: SSTX2 Directionality support + * <9> :: SSRX1 Directionality support + * <8> :: SSRX2 Directionality support + * <7:5> :: Vconn power + * <4> :: Vconn power required + * <3> :: Vbus power required + * <2:0> :: USB SS Signaling support + */ +#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \ + (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 \ + | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \ + | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \ + | ((usbss) & 0x7)) + +#define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1) +#define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1) + +#define AMA_USBSS_U2_ONLY 0 +#define AMA_USBSS_U31_GEN1 1 +#define AMA_USBSS_U31_GEN2 2 +#define AMA_USBSS_BBONLY 3 + +/* * VPD VDO * --------- * <31:28> :: HW version |