diff options
Diffstat (limited to 'include/drm')
-rw-r--r-- | include/drm/bridge/dw_hdmi.h | 1 | ||||
-rw-r--r-- | include/drm/drm_atomic.h | 11 | ||||
-rw-r--r-- | include/drm/drm_cache.h | 18 | ||||
-rw-r--r-- | include/drm/drm_client.h | 2 | ||||
-rw-r--r-- | include/drm/drm_color_mgmt.h | 28 | ||||
-rw-r--r-- | include/drm/drm_connector.h | 2 | ||||
-rw-r--r-- | include/drm/drm_crtc_helper.h | 16 | ||||
-rw-r--r-- | include/drm/drm_dp_helper.h | 20 | ||||
-rw-r--r-- | include/drm/drm_dp_mst_helper.h | 3 | ||||
-rw-r--r-- | include/drm/drm_drv.h | 135 | ||||
-rw-r--r-- | include/drm/drm_dsc.h | 233 | ||||
-rw-r--r-- | include/drm/drm_mode_config.h | 2 | ||||
-rw-r--r-- | include/drm/drm_modeset_helper.h | 6 | ||||
-rw-r--r-- | include/drm/drm_modeset_helper_vtables.h | 2 | ||||
-rw-r--r-- | include/drm/drm_modeset_lock.h | 2 | ||||
-rw-r--r-- | include/drm/drm_probe_helper.h | 27 | ||||
-rw-r--r-- | include/drm/drm_rect.h | 6 | ||||
-rw-r--r-- | include/drm/gpu_scheduler.h | 13 | ||||
-rw-r--r-- | include/drm/i915_pciids.h | 8 | ||||
-rw-r--r-- | include/drm/ttm/ttm_bo_api.h | 28 | ||||
-rw-r--r-- | include/drm/ttm/ttm_bo_driver.h | 11 |
21 files changed, 432 insertions, 142 deletions
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h index 9f93895dde88..66e70770cce5 100644 --- a/include/drm/bridge/dw_hdmi.h +++ b/include/drm/bridge/dw_hdmi.h @@ -159,6 +159,7 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense); void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate); void dw_hdmi_audio_enable(struct dw_hdmi *hdmi); void dw_hdmi_audio_disable(struct dw_hdmi *hdmi); +void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi); /* PHY configuration */ void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address); diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index 811b4a92568f..824a5ed4e216 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -192,7 +192,7 @@ struct drm_private_state; * private objects. The structure itself is used as a vtable to identify the * associated private object type. Each private object type that needs to be * added to the atomic states is expected to have an implementation of these - * hooks and pass a pointer to it's drm_private_state_funcs struct to + * hooks and pass a pointer to its drm_private_state_funcs struct to * drm_atomic_get_private_obj_state(). */ struct drm_private_state_funcs { @@ -329,6 +329,15 @@ struct drm_atomic_state { bool allow_modeset : 1; bool legacy_cursor_update : 1; bool async_update : 1; + /** + * @duplicated: + * + * Indicates whether or not this atomic state was duplicated using + * drm_atomic_helper_duplicate_state(). Drivers and atomic helpers + * should use this to fixup normal inconsistencies in duplicated + * states. + */ + bool duplicated : 1; struct __drm_planes_state *planes; struct __drm_crtcs_state *crtcs; int num_connector; diff --git a/include/drm/drm_cache.h b/include/drm/drm_cache.h index bfe1639df02d..97fc498dc767 100644 --- a/include/drm/drm_cache.h +++ b/include/drm/drm_cache.h @@ -47,6 +47,24 @@ static inline bool drm_arch_can_wc_memory(void) return false; #elif defined(CONFIG_MIPS) && defined(CONFIG_CPU_LOONGSON3) return false; +#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64) + /* + * The DRM driver stack is designed to work with cache coherent devices + * only, but permits an optimization to be enabled in some cases, where + * for some buffers, both the CPU and the GPU use uncached mappings, + * removing the need for DMA snooping and allocation in the CPU caches. + * + * The use of uncached GPU mappings relies on the correct implementation + * of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU + * will use cached mappings nonetheless. On x86 platforms, this does not + * seem to matter, as uncached CPU mappings will snoop the caches in any + * case. However, on ARM and arm64, enabling this optimization on a + * platform where NoSnoop is ignored results in loss of coherency, which + * breaks correct operation of the device. Since we have no way of + * detecting whether NoSnoop works or not, just disable this + * optimization entirely for ARM and arm64. + */ + return false; #else return true; #endif diff --git a/include/drm/drm_client.h b/include/drm/drm_client.h index 971bb7853776..8b552b1a6ce9 100644 --- a/include/drm/drm_client.h +++ b/include/drm/drm_client.h @@ -26,7 +26,7 @@ struct drm_client_funcs { * @unregister: * * Called when &drm_device is unregistered. The client should respond by - * releasing it's resources using drm_client_release(). + * releasing its resources using drm_client_release(). * * This callback is optional. */ diff --git a/include/drm/drm_color_mgmt.h b/include/drm/drm_color_mgmt.h index 90ef9996d9a4..d1c662d92ab7 100644 --- a/include/drm/drm_color_mgmt.h +++ b/include/drm/drm_color_mgmt.h @@ -69,4 +69,32 @@ int drm_plane_create_color_properties(struct drm_plane *plane, u32 supported_ranges, enum drm_color_encoding default_encoding, enum drm_color_range default_range); + +/** + * enum drm_color_lut_tests - hw-specific LUT tests to perform + * + * The drm_color_lut_check() function takes a bitmask of the values here to + * determine which tests to apply to a userspace-provided LUT. + */ +enum drm_color_lut_tests { + /** + * @DRM_COLOR_LUT_EQUAL_CHANNELS: + * + * Checks whether the entries of a LUT all have equal values for the + * red, green, and blue channels. Intended for hardware that only + * accepts a single value per LUT entry and assumes that value applies + * to all three color components. + */ + DRM_COLOR_LUT_EQUAL_CHANNELS = BIT(0), + + /** + * @DRM_COLOR_LUT_NON_DECREASING: + * + * Checks whether the entries of a LUT are always flat or increasing + * (never decreasing). + */ + DRM_COLOR_LUT_NON_DECREASING = BIT(1), +}; + +int drm_color_lut_check(const struct drm_property_blob *lut, u32 tests); #endif diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 994161374a49..8fe22abb1e10 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -912,7 +912,7 @@ struct drm_connector { /** * @ycbcr_420_allowed : This bool indicates if this connector is * capable of handling YCBCR 420 output. While parsing the EDID - * blocks, its very helpful to know, if the source is capable of + * blocks it's very helpful to know if the source is capable of * handling YCBCR 420 outputs. */ bool ycbcr_420_allowed; diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 0ee9a96b70da..a6d520d5b6ca 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -58,20 +58,4 @@ int drm_helper_connector_dpms(struct drm_connector *connector, int mode); void drm_helper_resume_force_mode(struct drm_device *dev); int drm_helper_force_disable_all(struct drm_device *dev); -/* drm_probe_helper.c */ -int drm_helper_probe_single_connector_modes(struct drm_connector - *connector, uint32_t maxX, - uint32_t maxY); -int drm_helper_probe_detect(struct drm_connector *connector, - struct drm_modeset_acquire_ctx *ctx, - bool force); -void drm_kms_helper_poll_init(struct drm_device *dev); -void drm_kms_helper_poll_fini(struct drm_device *dev); -bool drm_helper_hpd_irq_event(struct drm_device *dev); -void drm_kms_helper_hotplug_event(struct drm_device *dev); - -void drm_kms_helper_poll_disable(struct drm_device *dev); -void drm_kms_helper_poll_enable(struct drm_device *dev); -bool drm_kms_helper_is_poll_worker(void); - #endif diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index af181c9c8f54..97ce790a5b5a 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -989,6 +989,7 @@ #define DP_PEER_DEVICE_DP_LEGACY_CONV 0x4 /* DP 1.2 MST sideband request names DP 1.2a Table 2-80 */ +#define DP_GET_MSG_TRANSACTION_VERSION 0x00 /* DP 1.3 */ #define DP_LINK_ADDRESS 0x01 #define DP_CONNECTION_STATUS_NOTIFY 0x02 #define DP_ENUM_PATH_RESOURCES 0x10 @@ -1005,6 +1006,10 @@ #define DP_SINK_EVENT_NOTIFY 0x30 #define DP_QUERY_STREAM_ENC_STATUS 0x38 +/* DP 1.2 MST sideband reply types */ +#define DP_SIDEBAND_REPLY_ACK 0x00 +#define DP_SIDEBAND_REPLY_NAK 0x01 + /* DP 1.2 MST sideband nak reasons - table 2.84 */ #define DP_NAK_WRITE_FAILURE 0x01 #define DP_NAK_INVALID_READ 0x02 @@ -1060,11 +1065,18 @@ int drm_dp_bw_code_to_link_rate(u8 link_bw); #define DP_SDP_VSC_EXT_CEA 0x21 /* DP 1.4 */ /* 0x80+ CEA-861 infoframe types */ +/** + * struct dp_sdp_header - DP secondary data packet header + * @HB0: Secondary Data Packet ID + * @HB1: Secondary Data Packet Type + * @HB2: Secondary Data Packet Specific header, Byte 0 + * @HB3: Secondary Data packet Specific header, Byte 1 + */ struct dp_sdp_header { - u8 HB0; /* Secondary Data Packet ID */ - u8 HB1; /* Secondary Data Packet Type */ - u8 HB2; /* Secondary Data Packet Specific header, Byte 0 */ - u8 HB3; /* Secondary Data packet Specific header, Byte 1 */ + u8 HB0; + u8 HB1; + u8 HB2; + u8 HB3; } __packed; #define EDP_SDP_HEADER_REVISION_MASK 0x1F diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h index 451d020f0137..8c97a5f92c47 100644 --- a/include/drm/drm_dp_mst_helper.h +++ b/include/drm/drm_dp_mst_helper.h @@ -641,7 +641,8 @@ void drm_dp_mst_dump_topology(struct seq_file *m, struct drm_dp_mst_topology_mgr *mgr); void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr); -int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr); +int __must_check +drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr); struct drm_dp_mst_topology_state *drm_atomic_get_mst_topology_state(struct drm_atomic_state *state, struct drm_dp_mst_topology_mgr *mgr); int __must_check diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h index 35af23f5fa0d..ca46a45a9cce 100644 --- a/include/drm/drm_drv.h +++ b/include/drm/drm_drv.h @@ -41,21 +41,113 @@ struct drm_display_mode; struct drm_mode_create_dumb; struct drm_printer; -/* driver capabilities and requirements mask */ -#define DRIVER_USE_AGP 0x1 -#define DRIVER_LEGACY 0x2 -#define DRIVER_PCI_DMA 0x8 -#define DRIVER_SG 0x10 -#define DRIVER_HAVE_DMA 0x20 -#define DRIVER_HAVE_IRQ 0x40 -#define DRIVER_IRQ_SHARED 0x80 -#define DRIVER_GEM 0x1000 -#define DRIVER_MODESET 0x2000 -#define DRIVER_PRIME 0x4000 -#define DRIVER_RENDER 0x8000 -#define DRIVER_ATOMIC 0x10000 -#define DRIVER_KMS_LEGACY_CONTEXT 0x20000 -#define DRIVER_SYNCOBJ 0x40000 +/** + * enum drm_driver_feature - feature flags + * + * See &drm_driver.driver_features, drm_device.driver_features and + * drm_core_check_feature(). + */ +enum drm_driver_feature { + /** + * @DRIVER_GEM: + * + * Driver use the GEM memory manager. This should be set for all modern + * drivers. + */ + DRIVER_GEM = BIT(0), + /** + * @DRIVER_MODESET: + * + * Driver supports mode setting interfaces (KMS). + */ + DRIVER_MODESET = BIT(1), + /** + * @DRIVER_PRIME: + * + * Driver implements DRM PRIME buffer sharing. + */ + DRIVER_PRIME = BIT(2), + /** + * @DRIVER_RENDER: + * + * Driver supports dedicated render nodes. See also the :ref:`section on + * render nodes <drm_render_node>` for details. + */ + DRIVER_RENDER = BIT(3), + /** + * @DRIVER_ATOMIC: + * + * Driver supports the full atomic modesetting userspace API. Drivers + * which only use atomic internally, but do not the support the full + * userspace API (e.g. not all properties converted to atomic, or + * multi-plane updates are not guaranteed to be tear-free) should not + * set this flag. + */ + DRIVER_ATOMIC = BIT(4), + /** + * @DRIVER_SYNCOBJ: + * + * Driver supports &drm_syncobj for explicit synchronization of command + * submission. + */ + DRIVER_SYNCOBJ = BIT(5), + + /* IMPORTANT: Below are all the legacy flags, add new ones above. */ + + /** + * @DRIVER_USE_AGP: + * + * Set up DRM AGP support, see drm_agp_init(), the DRM core will manage + * AGP resources. New drivers don't need this. + */ + DRIVER_USE_AGP = BIT(25), + /** + * @DRIVER_LEGACY: + * + * Denote a legacy driver using shadow attach. Do not use. + */ + DRIVER_LEGACY = BIT(26), + /** + * @DRIVER_PCI_DMA: + * + * Driver is capable of PCI DMA, mapping of PCI DMA buffers to userspace + * will be enabled. Only for legacy drivers. Do not use. + */ + DRIVER_PCI_DMA = BIT(27), + /** + * @DRIVER_SG: + * + * Driver can perform scatter/gather DMA, allocation and mapping of + * scatter/gather buffers will be enabled. Only for legacy drivers. Do + * not use. + */ + DRIVER_SG = BIT(28), + + /** + * @DRIVER_HAVE_DMA: + * + * Driver supports DMA, the userspace DMA API will be supported. Only + * for legacy drivers. Do not use. + */ + DRIVER_HAVE_DMA = BIT(29), + /** + * @DRIVER_HAVE_IRQ: + * + * Legacy irq support. Only for legacy drivers. Do not use. + * + * New drivers can either use the drm_irq_install() and + * drm_irq_uninstall() helper functions, or roll their own irq support + * code by calling request_irq() directly. + */ + DRIVER_HAVE_IRQ = BIT(30), + /** + * @DRIVER_KMS_LEGACY_CONTEXT: + * + * Used only by nouveau for backwards compatibility with existing + * userspace. Do not use. + */ + DRIVER_KMS_LEGACY_CONTEXT = BIT(31), +}; /** * struct drm_driver - DRM driver structure @@ -579,7 +671,12 @@ struct drm_driver { /** @date: driver date */ char *date; - /** @driver_features: driver features */ + /** + * @driver_features: + * Driver features, see &enum drm_driver_feature. Drivers can disable + * some features on a per-instance basis using + * &drm_device.driver_features. + */ u32 driver_features; /** @@ -643,6 +740,10 @@ void drm_dev_unplug(struct drm_device *dev); * Unplugging itself is singalled through drm_dev_unplug(). If a device is * unplugged, these two functions guarantee that any store before calling * drm_dev_unplug() is visible to callers of this function after it completes + * + * WARNING: This function fundamentally races against drm_dev_unplug(). It is + * recommended that drivers instead use the underlying drm_dev_enter() and + * drm_dev_exit() function pairs. */ static inline bool drm_dev_is_unplugged(struct drm_device *dev) { @@ -662,7 +763,7 @@ static inline bool drm_dev_is_unplugged(struct drm_device *dev) * @feature: feature flag * * This checks @dev for driver features, see &drm_driver.driver_features, - * &drm_device.driver_features, and the various DRIVER_\* flags. + * &drm_device.driver_features, and the various &enum drm_driver_feature flags. * * Returns true if the @feature is supported, false otherwise. */ diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h index d03f1b83421a..9c26f083c70f 100644 --- a/include/drm/drm_dsc.h +++ b/include/drm/drm_dsc.h @@ -44,111 +44,231 @@ #define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0 #define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13 -/* Configuration for a single Rate Control model range */ +/** + * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters + * + * This defines different rate control parameters used by the DSC engine + * to compress the frame. + */ struct drm_dsc_rc_range_parameters { - /* Min Quantization Parameters allowed for this range */ + /** + * @range_min_qp: Min Quantization Parameters allowed for this range + */ u8 range_min_qp; - /* Max Quantization Parameters allowed for this range */ + /** + * @range_max_qp: Max Quantization Parameters allowed for this range + */ u8 range_max_qp; - /* Bits/group offset to apply to target for this group */ + /** + * @range_bpg_offset: + * Bits/group offset to apply to target for this group + */ u8 range_bpg_offset; }; +/** + * struct drm_dsc_config - Parameters required to configure DSC + * + * Driver populates this structure with all the parameters required + * to configure the display stream compression on the source. + */ struct drm_dsc_config { - /* Bits / component for previous reconstructed line buffer */ + /** + * @line_buf_depth: + * Bits per component for previous reconstructed line buffer + */ u8 line_buf_depth; - /* Bits per component to code (must be 8, 10, or 12) */ + /** + * @bits_per_component: Bits per component to code (8/10/12) + */ u8 bits_per_component; - /* - * Flag indicating to do RGB - YCoCg conversion - * and back (should be 1 for RGB input) + /** + * @convert_rgb: + * Flag to indicate if RGB - YCoCg conversion is needed + * True if RGB input, False if YCoCg input */ bool convert_rgb; + /** + * @slice_count: Number fo slices per line used by the DSC encoder + */ u8 slice_count; - /* Slice Width */ + /** + * @slice_width: Width of each slice in pixels + */ u16 slice_width; - /* Slice Height */ + /** + * @slice_height: Slice height in pixels + */ u16 slice_height; - /* - * 4:2:2 enable mode (from PPS, 4:2:2 conversion happens - * outside of DSC encode/decode algorithm) + /** + * @enable422: True for 4_2_2 sampling, false for 4_4_4 sampling */ bool enable422; - /* Picture Width */ + /** + * @pic_width: Width of the input display frame in pixels + */ u16 pic_width; - /* Picture Height */ + /** + * @pic_height: Vertical height of the input display frame + */ u16 pic_height; - /* Offset to bits/group used by RC to determine QP adjustment */ + /** + * @rc_tgt_offset_high: + * Offset to bits/group used by RC to determine QP adjustment + */ u8 rc_tgt_offset_high; - /* Offset to bits/group used by RC to determine QP adjustment */ + /** + * @rc_tgt_offset_low: + * Offset to bits/group used by RC to determine QP adjustment + */ u8 rc_tgt_offset_low; - /* Bits/pixel target << 4 (ie., 4 fractional bits) */ + /** + * @bits_per_pixel: + * Target bits per pixel with 4 fractional bits, bits_per_pixel << 4 + */ u16 bits_per_pixel; - /* - * Factor to determine if an edge is present based - * on the bits produced + /** + * @rc_edge_factor: + * Factor to determine if an edge is present based on the bits produced */ u8 rc_edge_factor; - /* Slow down incrementing once the range reaches this value */ + /** + * @rc_quant_incr_limit1: + * Slow down incrementing once the range reaches this value + */ u8 rc_quant_incr_limit1; - /* Slow down incrementing once the range reaches this value */ + /** + * @rc_quant_incr_limit0: + * Slow down incrementing once the range reaches this value + */ u8 rc_quant_incr_limit0; - /* Number of pixels to delay the initial transmission */ + /** + * @initial_xmit_delay: + * Number of pixels to delay the initial transmission + */ u16 initial_xmit_delay; - /* Number of pixels to delay the VLD on the decoder,not including SSM */ + /** + * @initial_dec_delay: + * Initial decoder delay, number of pixel times that the decoder + * accumulates data in its rate buffer before starting to decode + * and output pixels. + */ u16 initial_dec_delay; - /* Block prediction enable */ + /** + * @block_pred_enable: + * True if block prediction is used to code any groups within the + * picture. False if BP not used + */ bool block_pred_enable; - /* Bits/group offset to use for first line of the slice */ + /** + * @first_line_bpg_offset: + * Number of additional bits allocated for each group on the first + * line of slice. + */ u8 first_line_bpg_offset; - /* Value to use for RC model offset at slice start */ + /** + * @initial_offset: Value to use for RC model offset at slice start + */ u16 initial_offset; - /* Thresholds defining each of the buffer ranges */ + /** + * @rc_buf_thresh: Thresholds defining each of the buffer ranges + */ u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1]; - /* Parameters for each of the RC ranges */ + /** + * @rc_range_params: + * Parameters for each of the RC ranges defined in + * &struct drm_dsc_rc_range_parameters + */ struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES]; - /* Total size of RC model */ + /** + * @rc_model_size: Total size of RC model + */ u16 rc_model_size; - /* Minimum QP where flatness information is sent */ + /** + * @flatness_min_qp: Minimum QP where flatness information is sent + */ u8 flatness_min_qp; - /* Maximum QP where flatness information is sent */ + /** + * @flatness_max_qp: Maximum QP where flatness information is sent + */ u8 flatness_max_qp; - /* Initial value for scale factor */ + /** + * @initial_scale_value: Initial value for the scale factor + */ u8 initial_scale_value; - /* Decrement scale factor every scale_decrement_interval groups */ + /** + * @scale_decrement_interval: + * Specifies number of group times between decrementing the scale factor + * at beginning of a slice. + */ u16 scale_decrement_interval; - /* Increment scale factor every scale_increment_interval groups */ + /** + * @scale_increment_interval: + * Number of group times between incrementing the scale factor value + * used at the beginning of a slice. + */ u16 scale_increment_interval; - /* Non-first line BPG offset to use */ + /** + * @nfl_bpg_offset: Non first line BPG offset to be used + */ u16 nfl_bpg_offset; - /* BPG offset used to enforce slice bit */ + /** + * @slice_bpg_offset: BPG offset used to enforce slice bit + */ u16 slice_bpg_offset; - /* Final RC linear transformation offset value */ + /** + * @final_offset: Final RC linear transformation offset value + */ u16 final_offset; - /* Enable on-off VBR (ie., disable stuffing bits) */ + /** + * @vbr_enable: True if VBR mode is enabled, false if disabled + */ bool vbr_enable; - /* Mux word size (in bits) for SSM mode */ + /** + * @mux_word_size: Mux word size (in bits) for SSM mode + */ u8 mux_word_size; - /* - * The (max) size in bytes of the "chunks" that are - * used in slice multiplexing + /** + * @slice_chunk_size: + * The (max) size in bytes of the "chunks" that are used in slice + * multiplexing. */ u16 slice_chunk_size; - /* Rate Control buffer siz in bits */ + /** + * @rc_bits: Rate control buffer size in bits + */ u16 rc_bits; - /* DSC Minor Version */ + /** + * @dsc_version_minor: DSC minor version + */ u8 dsc_version_minor; - /* DSC Major version */ + /** + * @dsc_version_major: DSC major version + */ u8 dsc_version_major; - /* Native 4:2:2 support */ + /** + * @native_422: True if Native 4:2:2 supported, else false + */ bool native_422; - /* Native 4:2:0 support */ + /** + * @native_420: True if Native 4:2:0 supported else false. + */ bool native_420; - /* Additional bits/grp for seconnd line of slice for native 4:2:0 */ + /** + * @second_line_bpg_offset: + * Additional bits/grp for seconnd line of slice for native 4:2:0 + */ u8 second_line_bpg_offset; - /* Num of bits deallocated for each grp that is not in second line of slice */ + /** + * @nsl_bpg_offset: + * Num of bits deallocated for each grp that is not in second line of + * slice + */ u16 nsl_bpg_offset; - /* Offset adj fr second line in Native 4:2:0 mode */ + /** + * @second_line_offset_adj: + * Offset adjustment for second line in Native 4:2:0 mode + */ u16 second_line_offset_adj; }; @@ -468,10 +588,13 @@ struct drm_dsc_picture_parameter_set { * This structure represents the DSC PPS infoframe required to send the Picture * Parameter Set metadata required before enabling VESA Display Stream * Compression. This is based on the DP Secondary Data Packet structure and - * comprises of SDP Header as defined in drm_dp_helper.h and PPS payload. + * comprises of SDP Header as defined &struct struct dp_sdp_header in drm_dp_helper.h + * and PPS payload defined in &struct drm_dsc_picture_parameter_set. * - * @pps_header: Header for PPS as per DP SDP header format + * @pps_header: Header for PPS as per DP SDP header format of type + * &struct dp_sdp_header * @pps_payload: PPS payload fields as per DSC specification Table 4-1 + * as represented in &struct drm_dsc_picture_parameter_set */ struct drm_dsc_pps_infoframe { struct dp_sdp_header pps_header; diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index 1e6cb885994d..7f60e8eb269a 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -361,7 +361,7 @@ struct drm_mode_config { * * This is the big scary modeset BKL which protects everything that * isn't protect otherwise. Scope is unclear and fuzzy, try to remove - * anything from under it's protection and move it into more well-scoped + * anything from under its protection and move it into more well-scoped * locks. * * The one important thing this protects is the use of @acquire_ctx. diff --git a/include/drm/drm_modeset_helper.h b/include/drm/drm_modeset_helper.h index efa337f03129..995fd981cab0 100644 --- a/include/drm/drm_modeset_helper.h +++ b/include/drm/drm_modeset_helper.h @@ -23,7 +23,11 @@ #ifndef __DRM_KMS_HELPER_H__ #define __DRM_KMS_HELPER_H__ -#include <drm/drmP.h> +struct drm_crtc; +struct drm_crtc_funcs; +struct drm_device; +struct drm_framebuffer; +struct drm_mode_fb_cmd2; void drm_helper_move_panel_connectors_to_head(struct drm_device *); diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index 61142aa0ab23..cfb7be40bed7 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -1013,7 +1013,7 @@ struct drm_plane_helper_funcs { * @prepare_fb: * * This hook is to prepare a framebuffer for scanout by e.g. pinning - * it's backing storage or relocating it into a contiguous block of + * its backing storage or relocating it into a contiguous block of * VRAM. Other possible preparatory work includes flushing caches. * * This function must not block for outstanding rendering, since it is diff --git a/include/drm/drm_modeset_lock.h b/include/drm/drm_modeset_lock.h index a308f2d6496f..7b8841065b11 100644 --- a/include/drm/drm_modeset_lock.h +++ b/include/drm/drm_modeset_lock.h @@ -68,7 +68,7 @@ struct drm_modeset_acquire_ctx { /** * struct drm_modeset_lock - used for locking modeset resources. * @mutex: resource locking - * @head: used to hold it's place on &drm_atomi_state.locked list when + * @head: used to hold its place on &drm_atomi_state.locked list when * part of an atomic update * * Used for locking CRTCs and other modeset resources. diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h new file mode 100644 index 000000000000..8d3ed2834d34 --- /dev/null +++ b/include/drm/drm_probe_helper.h @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT + +#ifndef __DRM_PROBE_HELPER_H__ +#define __DRM_PROBE_HELPER_H__ + +#include <linux/types.h> + +struct drm_connector; +struct drm_device; +struct drm_modeset_acquire_ctx; + +int drm_helper_probe_single_connector_modes(struct drm_connector + *connector, uint32_t maxX, + uint32_t maxY); +int drm_helper_probe_detect(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + bool force); +void drm_kms_helper_poll_init(struct drm_device *dev); +void drm_kms_helper_poll_fini(struct drm_device *dev); +bool drm_helper_hpd_irq_event(struct drm_device *dev); +void drm_kms_helper_hotplug_event(struct drm_device *dev); + +void drm_kms_helper_poll_disable(struct drm_device *dev); +void drm_kms_helper_poll_enable(struct drm_device *dev); +bool drm_kms_helper_is_poll_worker(void); + +#endif diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h index 6c54544a4be7..6195820aa5c5 100644 --- a/include/drm/drm_rect.h +++ b/include/drm/drm_rect.h @@ -182,12 +182,6 @@ int drm_rect_calc_hscale(const struct drm_rect *src, int drm_rect_calc_vscale(const struct drm_rect *src, const struct drm_rect *dst, int min_vscale, int max_vscale); -int drm_rect_calc_hscale_relaxed(struct drm_rect *src, - struct drm_rect *dst, - int min_hscale, int max_hscale); -int drm_rect_calc_vscale_relaxed(struct drm_rect *src, - struct drm_rect *dst, - int min_vscale, int max_vscale); void drm_rect_debug_print(const char *prefix, const struct drm_rect *r, bool fixed_point); void drm_rect_rotate(struct drm_rect *r, diff --git a/include/drm/gpu_scheduler.h b/include/drm/gpu_scheduler.h index 47e19796c450..0daca4d8dad9 100644 --- a/include/drm/gpu_scheduler.h +++ b/include/drm/gpu_scheduler.h @@ -138,10 +138,6 @@ struct drm_sched_fence { struct dma_fence finished; /** - * @cb: the callback for the parent fence below. - */ - struct dma_fence_cb cb; - /** * @parent: the fence returned by &drm_sched_backend_ops.run_job * when scheduling the job on hardware. We signal the * &drm_sched_fence.finished fence once parent is signalled. @@ -181,6 +177,7 @@ struct drm_sched_fence *to_drm_sched_fence(struct dma_fence *f); * be scheduled further. * @s_priority: the priority of the job. * @entity: the entity to which this job belongs. + * @cb: the callback for the parent fence in s_fence. * * A job is created by the driver using drm_sched_job_init(), and * should call drm_sched_entity_push_job() once it wants the scheduler @@ -197,6 +194,7 @@ struct drm_sched_job { atomic_t karma; enum drm_sched_priority s_priority; struct drm_sched_entity *entity; + struct dma_fence_cb cb; }; static inline bool drm_sched_invalidate_job(struct drm_sched_job *s_job, @@ -298,9 +296,10 @@ int drm_sched_job_init(struct drm_sched_job *job, void *owner); void drm_sched_job_cleanup(struct drm_sched_job *job); void drm_sched_wakeup(struct drm_gpu_scheduler *sched); -void drm_sched_hw_job_reset(struct drm_gpu_scheduler *sched, - struct drm_sched_job *job); -void drm_sched_job_recovery(struct drm_gpu_scheduler *sched); +void drm_sched_stop(struct drm_gpu_scheduler *sched); +void drm_sched_start(struct drm_gpu_scheduler *sched, bool full_recovery); +void drm_sched_resubmit_jobs(struct drm_gpu_scheduler *sched); +void drm_sched_increase_karma(struct drm_sched_job *bad); bool drm_sched_dependency_optimized(struct dma_fence* fence, struct drm_sched_entity *entity); void drm_sched_fault(struct drm_gpu_scheduler *sched); diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h index 192667144693..d2fad7b0fcf6 100644 --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -394,6 +394,9 @@ INTEL_VGA_DEVICE(0x3E9A, info) /* SRV GT2 */ /* CFL H */ +#define INTEL_CFL_H_GT1_IDS(info) \ + INTEL_VGA_DEVICE(0x3E9C, info) + #define INTEL_CFL_H_GT2_IDS(info) \ INTEL_VGA_DEVICE(0x3E9B, info), /* Halo GT2 */ \ INTEL_VGA_DEVICE(0x3E94, info) /* Halo GT2 */ @@ -426,6 +429,7 @@ #define INTEL_CFL_IDS(info) \ INTEL_CFL_S_GT1_IDS(info), \ INTEL_CFL_S_GT2_IDS(info), \ + INTEL_CFL_H_GT1_IDS(info), \ INTEL_CFL_H_GT2_IDS(info), \ INTEL_CFL_U_GT2_IDS(info), \ INTEL_CFL_U_GT3_IDS(info), \ @@ -457,9 +461,13 @@ INTEL_VGA_DEVICE(0x8A51, info), \ INTEL_VGA_DEVICE(0x8A5C, info), \ INTEL_VGA_DEVICE(0x8A5D, info), \ + INTEL_VGA_DEVICE(0x8A59, info), \ + INTEL_VGA_DEVICE(0x8A58, info), \ INTEL_VGA_DEVICE(0x8A52, info), \ INTEL_VGA_DEVICE(0x8A5A, info), \ INTEL_VGA_DEVICE(0x8A5B, info), \ + INTEL_VGA_DEVICE(0x8A57, info), \ + INTEL_VGA_DEVICE(0x8A56, info), \ INTEL_VGA_DEVICE(0x8A71, info), \ INTEL_VGA_DEVICE(0x8A70, info) diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h index 3fc4854dce49..49d9cdfc58f2 100644 --- a/include/drm/ttm/ttm_bo_api.h +++ b/include/drm/ttm/ttm_bo_api.h @@ -296,23 +296,6 @@ static inline void ttm_bo_get(struct ttm_buffer_object *bo) } /** - * ttm_bo_reference - reference a struct ttm_buffer_object - * - * @bo: The buffer object. - * - * Returns a refcounted pointer to a buffer object. - * - * This function is deprecated. Use @ttm_bo_get instead. - */ - -static inline struct ttm_buffer_object * -ttm_bo_reference(struct ttm_buffer_object *bo) -{ - ttm_bo_get(bo); - return bo; -} - -/** * ttm_bo_get_unless_zero - reference a struct ttm_buffer_object unless * its refcount has already reached zero. * @bo: The buffer object. @@ -387,17 +370,6 @@ int ttm_bo_validate(struct ttm_buffer_object *bo, void ttm_bo_put(struct ttm_buffer_object *bo); /** - * ttm_bo_unref - * - * @bo: The buffer object. - * - * Unreference and clear a pointer to a buffer object. - * - * This function is deprecated. Use @ttm_bo_put instead. - */ -void ttm_bo_unref(struct ttm_buffer_object **bo); - -/** * ttm_bo_add_to_lru * * @bo: The buffer object. diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index 1021106438b2..cbf3180cb612 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -381,6 +381,15 @@ struct ttm_bo_driver { */ int (*access_memory)(struct ttm_buffer_object *bo, unsigned long offset, void *buf, int len, int write); + + /** + * struct ttm_bo_driver member del_from_lru_notify + * + * @bo: the buffer object deleted from lru + * + * notify driver that a BO was deleted from LRU. + */ + void (*del_from_lru_notify)(struct ttm_buffer_object *bo); }; /** @@ -867,7 +876,7 @@ int ttm_bo_pipeline_move(struct ttm_buffer_object *bo, * * @bo: A pointer to a struct ttm_buffer_object. * - * Pipelined gutting a BO of it's backing store. + * Pipelined gutting a BO of its backing store. */ int ttm_bo_pipeline_gutting(struct ttm_buffer_object *bo); |