diff options
Diffstat (limited to 'include/drm/drm_crtc.h')
| -rw-r--r-- | include/drm/drm_crtc.h | 70 |
1 files changed, 66 insertions, 4 deletions
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 291239f2fafc..6588bffb6518 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -63,8 +63,16 @@ struct drm_mode_object { #define DRM_OBJECT_MAX_PROPERTY 24 struct drm_object_properties { - int count; - uint32_t ids[DRM_OBJECT_MAX_PROPERTY]; + int count, atomic_count; + /* NOTE: if we ever start dynamically destroying properties (ie. + * not at drm_mode_config_cleanup() time), then we'd have to do + * a better job of detaching property from mode objects to avoid + * dangling property pointers: + */ + struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY]; + /* do not read/write values directly, but use drm_object_property_get_value() + * and drm_object_property_set_value(): + */ uint64_t values[DRM_OBJECT_MAX_PROPERTY]; }; @@ -237,7 +245,9 @@ struct drm_atomic_state; /** * struct drm_crtc_state - mutable CRTC state + * @crtc: backpointer to the CRTC * @enable: whether the CRTC should be enabled, gates all other state + * @active: whether the CRTC is actively displaying (used for DPMS) * @mode_changed: for use by helpers and drivers when computing state updates * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes * @last_vblank_count: for helpers and drivers to capture the vblank of the @@ -248,9 +258,18 @@ struct drm_atomic_state; * @event: optional pointer to a DRM event to signal upon completion of the * state update * @state: backpointer to global drm_atomic_state + * + * Note that the distinction between @enable and @active is rather subtile: + * Flipping @active while @enable is set without changing anything else may + * never return in a failure from the ->atomic_check callback. Userspace assumes + * that a DPMS On will always succeed. In other words: @enable controls resource + * assignment, @active controls the actual hardware state. */ struct drm_crtc_state { + struct drm_crtc *crtc; + bool enable; + bool active; /* computed state bits used by helpers and drivers */ bool planes_changed : 1; @@ -292,6 +311,9 @@ struct drm_crtc_state { * @atomic_duplicate_state: duplicate the atomic state for this CRTC * @atomic_destroy_state: destroy an atomic state for this CRTC * @atomic_set_property: set a property on an atomic state for this CRTC + * (do not call directly, use drm_atomic_crtc_set_property()) + * @atomic_get_property: get a property on an atomic state for this CRTC + * (do not call directly, use drm_atomic_crtc_get_property()) * * The drm_crtc_funcs structure is the central CRTC management structure * in the DRM. Each CRTC controls one or more connectors (note that the name @@ -351,6 +373,10 @@ struct drm_crtc_funcs { struct drm_crtc_state *state, struct drm_property *property, uint64_t val); + int (*atomic_get_property)(struct drm_crtc *crtc, + const struct drm_crtc_state *state, + struct drm_property *property, + uint64_t *val); }; /** @@ -449,11 +475,14 @@ struct drm_crtc { /** * struct drm_connector_state - mutable connector state + * @connector: backpointer to the connector * @crtc: CRTC to connect connector to, NULL if disabled * @best_encoder: can be used by helpers and drivers to select the encoder * @state: backpointer to global drm_atomic_state */ struct drm_connector_state { + struct drm_connector *connector; + struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_connector() */ struct drm_encoder *best_encoder; @@ -475,6 +504,9 @@ struct drm_connector_state { * @atomic_duplicate_state: duplicate the atomic state for this connector * @atomic_destroy_state: destroy an atomic state for this connector * @atomic_set_property: set a property on an atomic state for this connector + * (do not call directly, use drm_atomic_connector_set_property()) + * @atomic_get_property: get a property on an atomic state for this connector + * (do not call directly, use drm_atomic_connector_get_property()) * * Each CRTC may have one or more connectors attached to it. The functions * below allow the core DRM code to control connectors, enumerate available modes, @@ -508,6 +540,10 @@ struct drm_connector_funcs { struct drm_connector_state *state, struct drm_property *property, uint64_t val); + int (*atomic_get_property)(struct drm_connector *connector, + const struct drm_connector_state *state, + struct drm_property *property, + uint64_t *val); }; /** @@ -693,6 +729,7 @@ struct drm_connector { /** * struct drm_plane_state - mutable plane state + * @plane: backpointer to the plane * @crtc: currently bound CRTC, NULL if disabled * @fb: currently bound framebuffer * @fence: optional fence to wait for before scanning out @fb @@ -709,6 +746,8 @@ struct drm_connector { * @state: backpointer to global drm_atomic_state */ struct drm_plane_state { + struct drm_plane *plane; + struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_plane() */ struct drm_framebuffer *fb; /* do not write directly, use drm_atomic_set_fb_for_plane() */ struct fence *fence; @@ -735,6 +774,9 @@ struct drm_plane_state { * @atomic_duplicate_state: duplicate the atomic state for this plane * @atomic_destroy_state: destroy an atomic state for this plane * @atomic_set_property: set a property on an atomic state for this plane + * (do not call directly, use drm_atomic_plane_set_property()) + * @atomic_get_property: get a property on an atomic state for this plane + * (do not call directly, use drm_atomic_plane_get_property()) */ struct drm_plane_funcs { int (*update_plane)(struct drm_plane *plane, @@ -758,6 +800,10 @@ struct drm_plane_funcs { struct drm_plane_state *state, struct drm_property *property, uint64_t val); + int (*atomic_get_property)(struct drm_plane *plane, + const struct drm_plane_state *state, + struct drm_property *property, + uint64_t *val); }; enum drm_plane_type { @@ -856,7 +902,7 @@ struct drm_bridge { /** * struct struct drm_atomic_state - the global state object for atomic updates * @dev: parent DRM device - * @flags: state flags like async update + * @allow_modeset: allow full modeset * @planes: pointer to array of plane pointers * @plane_states: pointer to array of plane states pointers * @crtcs: pointer to array of CRTC pointers @@ -868,7 +914,7 @@ struct drm_bridge { */ struct drm_atomic_state { struct drm_device *dev; - uint32_t flags; + bool allow_modeset : 1; struct drm_plane **planes; struct drm_plane_state **plane_states; struct drm_crtc **crtcs; @@ -1053,6 +1099,16 @@ struct drm_mode_config { struct drm_property *tile_property; struct drm_property *plane_type_property; struct drm_property *rotation_property; + struct drm_property *prop_src_x; + struct drm_property *prop_src_y; + struct drm_property *prop_src_w; + struct drm_property *prop_src_h; + struct drm_property *prop_crtc_x; + struct drm_property *prop_crtc_y; + struct drm_property *prop_crtc_w; + struct drm_property *prop_crtc_h; + struct drm_property *prop_fb_id; + struct drm_property *prop_crtc_id; /* DVI-I properties */ struct drm_property *dvi_i_subconnector_property; @@ -1290,6 +1346,10 @@ extern int drm_mode_create_scaling_mode_property(struct drm_device *dev); extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev); extern int drm_mode_create_dirty_info_property(struct drm_device *dev); extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev); +extern bool drm_property_change_valid_get(struct drm_property *property, + uint64_t value, struct drm_mode_object **ref); +extern void drm_property_change_valid_put(struct drm_property *property, + struct drm_mode_object *ref); extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, struct drm_encoder *encoder); @@ -1381,6 +1441,8 @@ extern int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, extern int drm_mode_plane_set_obj_prop(struct drm_plane *plane, struct drm_property *property, uint64_t value); +extern int drm_mode_atomic_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); extern void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth, int *bpp); |