diff options
Diffstat (limited to 'include/asm-powerpc/irq.h')
| -rw-r--r-- | include/asm-powerpc/irq.h | 358 |
1 files changed, 308 insertions, 50 deletions
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index eb5f33e1977a..e05754752028 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -9,26 +9,14 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/config.h> #include <linux/threads.h> +#include <linux/list.h> +#include <linux/radix-tree.h> #include <asm/types.h> #include <asm/atomic.h> -/* this number is used when no interrupt has been assigned */ -#define NO_IRQ (-1) - -/* - * These constants are used for passing information about interrupt - * signal polarity and level/edge sensing to the low-level PIC chip - * drivers. - */ -#define IRQ_SENSE_MASK 0x1 -#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ -#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ - -#define IRQ_POLARITY_MASK 0x2 -#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ -#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ #define get_irq_desc(irq) (&irq_desc[(irq)]) @@ -36,50 +24,325 @@ #define for_each_irq(i) \ for ((i) = 0; (i) < NR_IRQS; ++(i)) -#ifdef CONFIG_PPC64 +extern atomic_t ppc_n_lost_interrupts; -/* - * Maximum number of interrupt sources that we can handle. +#ifdef CONFIG_PPC_MERGE + +/* This number is used when no interrupt has been assigned */ +#define NO_IRQ (0) + +/* This is a special irq number to return from get_irq() to tell that + * no interrupt happened _and_ ignore it (don't count it as bad). Some + * platforms like iSeries rely on that. */ +#define NO_IRQ_IGNORE ((unsigned int)-1) + +/* Total number of virq in the platform (make it a CONFIG_* option ? */ #define NR_IRQS 512 -/* Interrupt numbers are virtual in case they are sparsely - * distributed by the hardware. +/* Number of irqs reserved for the legacy controller */ +#define NUM_ISA_INTERRUPTS 16 + +/* This type is the placeholder for a hardware interrupt number. It has to + * be big enough to enclose whatever representation is used by a given + * platform. + */ +typedef unsigned long irq_hw_number_t; + +/* Interrupt controller "host" data structure. This could be defined as a + * irq domain controller. That is, it handles the mapping between hardware + * and virtual interrupt numbers for a given interrupt domain. The host + * structure is generally created by the PIC code for a given PIC instance + * (though a host can cover more than one PIC if they have a flat number + * model). It's the host callbacks that are responsible for setting the + * irq_chip on a given irq_desc after it's been mapped. + * + * The host code and data structures are fairly agnostic to the fact that + * we use an open firmware device-tree. We do have references to struct + * device_node in two places: in irq_find_host() to find the host matching + * a given interrupt controller node, and of course as an argument to its + * counterpart host->ops->match() callback. However, those are treated as + * generic pointers by the core and the fact that it's actually a device-node + * pointer is purely a convention between callers and implementation. This + * code could thus be used on other architectures by replacing those two + * by some sort of arch-specific void * "token" used to identify interrupt + * controllers. */ -extern unsigned int virt_irq_to_real_map[NR_IRQS]; +struct irq_host; +struct radix_tree_root; -/* The maximum virtual IRQ number that we support. This - * can be set by the platform and will be reduced by the - * value of __irq_offset_value. It defaults to and is - * capped by (NR_IRQS - 1). +/* Functions below are provided by the host and called whenever a new mapping + * is created or an old mapping is disposed. The host can then proceed to + * whatever internal data structures management is required. It also needs + * to setup the irq_desc when returning from map(). */ -extern unsigned int virt_irq_max; +struct irq_host_ops { + /* Match an interrupt controller device node to a host, returns + * 1 on a match + */ + int (*match)(struct irq_host *h, struct device_node *node); + + /* Create or update a mapping between a virtual irq number and a hw + * irq number. This can be called several times for the same mapping + * but with different flags, though unmap shall always be called + * before the virq->hw mapping is changed. + */ + int (*map)(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw, unsigned int flags); + + /* Dispose of such a mapping */ + void (*unmap)(struct irq_host *h, unsigned int virq); + + /* Translate device-tree interrupt specifier from raw format coming + * from the firmware to a irq_hw_number_t (interrupt line number) and + * trigger flags that can be passed to irq_create_mapping(). + * If no translation is provided, raw format is assumed to be one cell + * for interrupt line and default sense. + */ + int (*xlate)(struct irq_host *h, struct device_node *ctrler, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags); +}; + +struct irq_host { + struct list_head link; + + /* type of reverse mapping technique */ + unsigned int revmap_type; +#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */ +#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */ +#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */ +#define IRQ_HOST_MAP_TREE 3 /* radix tree */ + union { + struct { + unsigned int size; + unsigned int *revmap; + } linear; + struct radix_tree_root tree; + } revmap_data; + struct irq_host_ops *ops; + void *host_data; + irq_hw_number_t inval_irq; +}; + +/* The main irq map itself is an array of NR_IRQ entries containing the + * associate host and irq number. An entry with a host of NULL is free. + * An entry can be allocated if it's free, the allocator always then sets + * hwirq first to the host's invalid irq number and then fills ops. + */ +struct irq_map_entry { + irq_hw_number_t hwirq; + struct irq_host *host; +}; + +extern struct irq_map_entry irq_map[NR_IRQS]; + -/* Create a mapping for a real_irq if it doesn't already exist. - * Return the virtual irq as a convenience. +/*** + * irq_alloc_host - Allocate a new irq_host data structure + * @node: device-tree node of the interrupt controller + * @revmap_type: type of reverse mapping to use + * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map + * @ops: map/unmap host callbacks + * @inval_irq: provide a hw number in that host space that is always invalid + * + * Allocates and initialize and irq_host structure. Note that in the case of + * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns + * for all legacy interrupts except 0 (which is always the invalid irq for + * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by + * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated + * later during boot automatically (the reverse mapping will use the slow path + * until that happens). + */ +extern struct irq_host *irq_alloc_host(unsigned int revmap_type, + unsigned int revmap_arg, + struct irq_host_ops *ops, + irq_hw_number_t inval_irq); + + +/*** + * irq_find_host - Locates a host for a given device node + * @node: device-tree node of the interrupt controller + */ +extern struct irq_host *irq_find_host(struct device_node *node); + + +/*** + * irq_set_default_host - Set a "default" host + * @host: default host pointer + * + * For convenience, it's possible to set a "default" host that will be used + * whenever NULL is passed to irq_create_mapping(). It makes life easier for + * platforms that want to manipulate a few hard coded interrupt numbers that + * aren't properly represented in the device-tree. + */ +extern void irq_set_default_host(struct irq_host *host); + + +/*** + * irq_set_virq_count - Set the maximum number of virt irqs + * @count: number of linux virtual irqs, capped with NR_IRQS + * + * This is mainly for use by platforms like iSeries who want to program + * the virtual irq number in the controller to avoid the reverse mapping + */ +extern void irq_set_virq_count(unsigned int count); + + +/*** + * irq_create_mapping - Map a hardware interrupt into linux virq space + * @host: host owning this hardware interrupt or NULL for default host + * @hwirq: hardware irq number in that host space + * @flags: flags passed to the controller. contains the trigger type among + * others. Use IRQ_TYPE_* defined in include/linux/irq.h + * + * Only one mapping per hardware interrupt is permitted. Returns a linux + * virq number. The flags can be used to provide sense information to the + * controller (typically extracted from the device-tree). If no information + * is passed, the controller defaults will apply (for example, xics can only + * do edge so flags are irrelevant for some pseries specific irqs). + * + * The device-tree generally contains the trigger info in an encoding that is + * specific to a given type of controller. In that case, you can directly use + * host->ops->trigger_xlate() to translate that. + * + * It is recommended that new PICs that don't have existing OF bindings chose + * to use a representation of triggers identical to linux. + */ +extern unsigned int irq_create_mapping(struct irq_host *host, + irq_hw_number_t hwirq, + unsigned int flags); + + +/*** + * irq_dispose_mapping - Unmap an interrupt + * @virq: linux virq number of the interrupt to unmap + */ +extern void irq_dispose_mapping(unsigned int virq); + +/*** + * irq_find_mapping - Find a linux virq from an hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a slow path, for use by generic code. It's expected that an + * irq controller implementation directly calls the appropriate low level + * mapping function. */ -int virt_irq_create_mapping(unsigned int real_irq); -void virt_irq_init(void); +extern unsigned int irq_find_mapping(struct irq_host *host, + irq_hw_number_t hwirq); -static inline unsigned int virt_irq_to_real(unsigned int virt_irq) + +/*** + * irq_radix_revmap - Find a linux virq from a hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a fast path, for use by irq controller code that uses radix tree + * revmaps + */ +extern unsigned int irq_radix_revmap(struct irq_host *host, + irq_hw_number_t hwirq); + +/*** + * irq_linear_revmap - Find a linux virq from a hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a fast path, for use by irq controller code that uses linear + * revmaps. It does fallback to the slow path if the revmap doesn't exist + * yet and will create the revmap entry with appropriate locking + */ + +extern unsigned int irq_linear_revmap(struct irq_host *host, + irq_hw_number_t hwirq); + + + +/*** + * irq_alloc_virt - Allocate virtual irq numbers + * @host: host owning these new virtual irqs + * @count: number of consecutive numbers to allocate + * @hint: pass a hint number, the allocator will try to use a 1:1 mapping + * + * This is a low level function that is used internally by irq_create_mapping() + * and that can be used by some irq controllers implementations for things + * like allocating ranges of numbers for MSIs. The revmaps are left untouched. + */ +extern unsigned int irq_alloc_virt(struct irq_host *host, + unsigned int count, + unsigned int hint); + +/*** + * irq_free_virt - Free virtual irq numbers + * @virq: virtual irq number of the first interrupt to free + * @count: number of interrupts to free + * + * This function is the opposite of irq_alloc_virt. It will not clear reverse + * maps, this should be done previously by unmap'ing the interrupt. In fact, + * all interrupts covered by the range being freed should have been unmapped + * prior to calling this. + */ +extern void irq_free_virt(unsigned int virq, unsigned int count); + + +/* -- OF helpers -- */ + +/* irq_create_of_mapping - Map a hardware interrupt into linux virq space + * @controller: Device node of the interrupt controller + * @inspec: Interrupt specifier from the device-tree + * @intsize: Size of the interrupt specifier from the device-tree + * + * This function is identical to irq_create_mapping except that it takes + * as input informations straight from the device-tree (typically the results + * of the of_irq_map_*() functions + */ +extern unsigned int irq_create_of_mapping(struct device_node *controller, + u32 *intspec, unsigned int intsize); + + +/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space + * @device: Device node of the device whose interrupt is to be mapped + * @index: Index of the interrupt to map + * + * This function is a wrapper that chains of_irq_map_one() and + * irq_create_of_mapping() to make things easier to callers + */ +extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index); + +/* -- End OF helpers -- */ + +/*** + * irq_early_init - Init irq remapping subsystem + */ +extern void irq_early_init(void); + +static __inline__ int irq_canonicalize(int irq) { - return virt_irq_to_real_map[virt_irq]; + return irq; } -extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq); + +#else /* CONFIG_PPC_MERGE */ + +/* This number is used when no interrupt has been assigned */ +#define NO_IRQ (-1) +#define NO_IRQ_IGNORE (-2) + /* - * List of interrupt controllers. + * These constants are used for passing information about interrupt + * signal polarity and level/edge sensing to the low-level PIC chip + * drivers. */ -#define IC_INVALID 0 -#define IC_OPEN_PIC 1 -#define IC_PPC_XIC 2 -#define IC_CELL_PIC 3 -#define IC_ISERIES 4 +#define IRQ_SENSE_MASK 0x1 +#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ +#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ -extern u64 ppc64_interrupt_controller; +#define IRQ_POLARITY_MASK 0x2 +#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ +#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ -#else /* 32-bit */ #if defined(CONFIG_40x) #include <asm/ibm4xx.h> @@ -512,16 +775,11 @@ extern u64 ppc64_interrupt_controller; #endif /* CONFIG_8260 */ -#endif +#endif /* Whatever way too big #ifdef */ #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) /* pedantic: these are long because they are used with set_bit --RR */ extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -extern atomic_t ppc_n_lost_interrupts; - -#define virt_irq_create_mapping(x) (x) - -#endif /* * Because many systems have two overlapping names spaces for @@ -560,6 +818,7 @@ static __inline__ int irq_canonicalize(int irq) irq = 9; return irq; } +#endif /* CONFIG_PPC_MERGE */ extern int distribute_irqs; @@ -579,9 +838,8 @@ extern struct thread_info *softirq_ctx[NR_CPUS]; extern void irq_ctx_init(void); extern void call_do_softirq(struct thread_info *tp); -extern int call___do_IRQ(int irq, struct pt_regs *regs, - struct thread_info *tp); - +extern int call_handle_irq(int irq, void *p1, void *p2, + struct thread_info *tp, void *func); #else #define irq_ctx_init() |