diff options
Diffstat (limited to 'include/asm-mn10300')
120 files changed, 0 insertions, 9109 deletions
diff --git a/include/asm-mn10300/Kbuild b/include/asm-mn10300/Kbuild deleted file mode 100644 index c68e1680da01..000000000000 --- a/include/asm-mn10300/Kbuild +++ /dev/null @@ -1 +0,0 @@ -include include/asm-generic/Kbuild.asm diff --git a/include/asm-mn10300/atomic.h b/include/asm-mn10300/atomic.h deleted file mode 100644 index bc064825f9b1..000000000000 --- a/include/asm-mn10300/atomic.h +++ /dev/null @@ -1,157 +0,0 @@ -/* MN10300 Atomic counter operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_ATOMIC_H -#define _ASM_ATOMIC_H - -#ifdef CONFIG_SMP -#error not SMP safe -#endif - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ - -/** - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. Note that the guaranteed - * useful range of an atomic_t is only 24 bits. - */ -#define atomic_read(v) ((v)->counter) - -/** - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. Note that the guaranteed - * useful range of an atomic_t is only 24 bits. - */ -#define atomic_set(v, i) (((v)->counter) = (i)) - -#include <asm/system.h> - -/** - * atomic_add_return - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v and returns the result - * Note that the guaranteed useful range of an atomic_t is only 24 bits. - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int temp; - - local_irq_save(flags); - temp = v->counter; - temp += i; - v->counter = temp; - local_irq_restore(flags); - - return temp; -} - -/** - * atomic_sub_return - subtract integer from atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v and returns the result - * Note that the guaranteed useful range of an atomic_t is only 24 bits. - */ -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long flags; - int temp; - - local_irq_save(flags); - temp = v->counter; - temp -= i; - v->counter = temp; - local_irq_restore(flags); - - return temp; -} - -static inline int atomic_add_negative(int i, atomic_t *v) -{ - return atomic_add_return(i, v) < 0; -} - -static inline void atomic_add(int i, atomic_t *v) -{ - atomic_add_return(i, v); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - atomic_sub_return(i, v); -} - -static inline void atomic_inc(atomic_t *v) -{ - atomic_add_return(1, v); -} - -static inline void atomic_dec(atomic_t *v) -{ - atomic_sub_return(1, v); -} - -#define atomic_dec_return(v) atomic_sub_return(1, (v)) -#define atomic_inc_return(v) atomic_add_return(1, (v)) - -#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) - -#define atomic_add_unless(v, a, u) \ -({ \ - int c, old; \ - c = atomic_read(v); \ - while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ - c = old; \ - c != (u); \ -}) - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - mask = ~mask; - local_irq_save(flags); - *addr &= mask; - local_irq_restore(flags); -} - -#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) - -/* Atomic operations are already serializing on MN10300??? */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include <asm-generic/atomic.h> - -#endif /* __KERNEL__ */ -#endif /* _ASM_ATOMIC_H */ diff --git a/include/asm-mn10300/auxvec.h b/include/asm-mn10300/auxvec.h deleted file mode 100644 index 4fdb60b2ae39..000000000000 --- a/include/asm-mn10300/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_AUXVEC_H -#define _ASM_AUXVEC_H - -#endif diff --git a/include/asm-mn10300/bitops.h b/include/asm-mn10300/bitops.h deleted file mode 100644 index 0b610f482abb..000000000000 --- a/include/asm-mn10300/bitops.h +++ /dev/null @@ -1,240 +0,0 @@ -/* MN10300 bit operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * These have to be done with inline assembly: that way the bit-setting - * is guaranteed to be atomic. All bit operations return 0 if the bit - * was cleared before the operation and != 0 if it was not. - * - * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). - */ -#ifndef __ASM_BITOPS_H -#define __ASM_BITOPS_H - -#include <asm/cpu-regs.h> - -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -/* - * set bit - */ -#define __set_bit(nr, addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - _a += (nr) >> 3; \ - \ - asm volatile("bset %2,(%1) # set_bit reg" \ - : "=m"(*_a) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ -}) - -#define set_bit(nr, addr) __set_bit((nr), (addr)) - -/* - * clear bit - */ -#define ___clear_bit(nr, addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - _a += (nr) >> 3; \ - \ - asm volatile("bclr %2,(%1) # clear_bit reg" \ - : "=m"(*_a) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ -}) - -#define clear_bit(nr, addr) ___clear_bit((nr), (addr)) - - -static inline void __clear_bit(int nr, volatile void *addr) -{ - unsigned int *a = (unsigned int *) addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a &= ~mask; -} - -/* - * test bit - */ -static inline int test_bit(int nr, const volatile void *addr) -{ - return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31)); -} - -/* - * change bit - */ -static inline void __change_bit(int nr, volatile void *addr) -{ - int mask; - unsigned int *a = (unsigned int *) addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a ^= mask; -} - -extern void change_bit(int nr, volatile void *addr); - -/* - * test and set bit - */ -#define __test_and_set_bit(nr,addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - unsigned epsw; \ - _a += (nr) >> 3; \ - \ - asm volatile("bset %3,(%2) # test_set_bit reg\n" \ - "mov epsw,%1" \ - : "=m"(*_a), "=d"(epsw) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ - \ - !(epsw & EPSW_FLAG_Z); \ -}) - -#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr)) - -/* - * test and clear bit - */ -#define __test_and_clear_bit(nr, addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - unsigned epsw; \ - _a += (nr) >> 3; \ - \ - asm volatile("bclr %3,(%2) # test_clear_bit reg\n" \ - "mov epsw,%1" \ - : "=m"(*_a), "=d"(epsw) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ - \ - !(epsw & EPSW_FLAG_Z); \ -}) - -#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr)) - -/* - * test and change bit - */ -static inline int __test_and_change_bit(int nr, volatile void *addr) -{ - int mask, retval; - unsigned int *a = (unsigned int *)addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - retval = (mask & *a) != 0; - *a ^= mask; - - return retval; -} - -extern int test_and_change_bit(int nr, volatile void *addr); - -#include <asm-generic/bitops/lock.h> - -#ifdef __KERNEL__ - -/** - * __ffs - find first bit set - * @x: the word to search - * - * - return 31..0 to indicate bit 31..0 most least significant bit set - * - if no bits are set in x, the result is undefined - */ -static inline __attribute__((const)) -unsigned long __ffs(unsigned long x) -{ - int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x)); - return bit; -} - -/* - * special slimline version of fls() for calculating ilog2_u32() - * - note: no protection against n == 0 - */ -static inline __attribute__((const)) -int __ilog2_u32(u32 n) -{ - int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n)); - return bit; -} - -/** - * fls - find last bit set - * @x: the word to search - * - * This is defined the same way as ffs: - * - return 32..1 to indicate bit 31..0 most significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int fls(int x) -{ - return (x != 0) ? __ilog2_u32(x) + 1 : 0; -} - -/** - * __fls - find last (most-significant) set bit in a long word - * @word: the word to search - * - * Undefined if no set bit exists, so code should check against 0 first. - */ -static inline unsigned long __fls(unsigned long word) -{ - return __ilog2_u32(word); -} - -/** - * ffs - find first bit set - * @x: the word to search - * - * - return 32..1 to indicate bit 31..0 most least significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int ffs(int x) -{ - /* Note: (x & -x) gives us a mask that is the least significant - * (rightmost) 1-bit of the value in x. - */ - return fls(x & -x); -} - -#include <asm-generic/bitops/ffz.h> -#include <asm-generic/bitops/fls64.h> -#include <asm-generic/bitops/find.h> -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/hweight.h> - -#define ext2_set_bit_atomic(lock, nr, addr) \ - test_and_set_bit((nr) ^ 0x18, (addr)) -#define ext2_clear_bit_atomic(lock, nr, addr) \ - test_and_clear_bit((nr) ^ 0x18, (addr)) - -#include <asm-generic/bitops/ext2-non-atomic.h> -#include <asm-generic/bitops/minix-le.h> - -#endif /* __KERNEL__ */ -#endif /* __ASM_BITOPS_H */ diff --git a/include/asm-mn10300/bug.h b/include/asm-mn10300/bug.h deleted file mode 100644 index 4fcf3384e259..000000000000 --- a/include/asm-mn10300/bug.h +++ /dev/null @@ -1,35 +0,0 @@ -/* MN10300 Kernel bug reporting - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_BUG_H -#define _ASM_BUG_H - -/* - * Tell the user there is some problem. - */ -#define _debug_bug_trap() \ -do { \ - asm volatile( \ - " syscall 15 \n" \ - "0: \n" \ - " .section __bug_table,\"a\" \n" \ - " .long 0b,%0,%1 \n" \ - " .previous \n" \ - : \ - : "i"(__FILE__), "i"(__LINE__) \ - ); \ -} while (0) - -#define BUG() _debug_bug_trap() - -#define HAVE_ARCH_BUG -#include <asm-generic/bug.h> - -#endif /* _ASM_BUG_H */ diff --git a/include/asm-mn10300/bugs.h b/include/asm-mn10300/bugs.h deleted file mode 100644 index 31c8bc592b47..000000000000 --- a/include/asm-mn10300/bugs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* MN10300 Checks for architecture-dependent bugs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_BUGS_H -#define _ASM_BUGS_H - -#include <asm/processor.h> - -static inline void __init check_bugs(void) -{ -} - -#endif /* _ASM_BUGS_H */ diff --git a/include/asm-mn10300/busctl-regs.h b/include/asm-mn10300/busctl-regs.h deleted file mode 100644 index 1632aef73401..000000000000 --- a/include/asm-mn10300/busctl-regs.h +++ /dev/null @@ -1,151 +0,0 @@ -/* AM33v2 on-board bus controller registers - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_BUSCTL_REGS_H -#define _ASM_BUSCTL_REGS_H - -#include <asm/cpu-regs.h> - -#ifdef __KERNEL__ - -/* bus controller registers */ -#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */ -#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */ -#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */ -#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */ -#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */ -#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */ -#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */ -#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */ -#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */ -#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */ -#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */ -#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */ -#define BCCR_API 0x00070000 /* bus arbitration priority */ -#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */ -#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */ -#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */ -#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */ -#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */ -#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */ -#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */ -#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */ -#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */ -#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */ -#define BCCR_TMON 0x03000000 /* timeout value settings */ -#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */ -#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */ -#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */ -#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */ -#define BCCR_TMOE 0x10000000 /* timeout detection enable */ - -#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */ -#define BCBERR_BESB 0x0000001f /* erroneous access destination space */ -#define BCBERR_BESB_MON 0x00000001 /* - monitor space */ -#define BCBERR_BESB_IO 0x00000002 /* - IO bus */ -#define BCBERR_BESB_EX 0x00000004 /* - EX bus */ -#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */ -#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */ -#define BCBERR_BERW 0x00000100 /* type of access */ -#define BCBERR_BERW_WRITE 0x00000000 /* - write */ -#define BCBERR_BERW_READ 0x00000100 /* - read */ -#define BCBERR_BESD 0x00000200 /* error detector */ -#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */ -#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */ -#define BCBERR_BEBST 0x00000400 /* type of access */ -#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */ -#define BCBERR_BEBST_BURST 0x00000400 /* - burst */ -#define BCBERR_BEME 0x00000800 /* multiple bus error flag */ -#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */ -#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */ -#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */ -#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */ -#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */ - -#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */ - -/* system bus controller registers */ -#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */ -#define SBBASE_BE 0x00000001 /* bank enable */ -#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */ -#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */ - -#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */ -#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */ -#define SBCNTRL0_REH 0x0000f000 /* read enable hold */ -#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */ -#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */ -#define SBCNTRL0_DAH 0x0f000000 /* data hold */ -#define SBCNTRL0_ADH 0xf0000000 /* address hold */ - -#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */ -#define SBCNTRL1_WED 0x00000f00 /* write enable delay */ -#define SBCNTRL1_RED 0x0000f000 /* read enable delay */ -#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */ -#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */ -#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */ -#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */ - -#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */ -#define SBCNTRL2_WC 0x000000ff /* wait count */ -#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */ -#define SBCNTRL2_WM 0x01000000 /* wait mode setting */ -#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */ -#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */ -#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */ -#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */ -#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */ -#define SBCNTRL2_BW 0x04000000 /* bus width */ -#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */ -#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */ -#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */ -#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */ -#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */ -#define SBCNTRL2_BT 0x70000000 /* bus type setting */ -#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */ -#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */ -#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */ -#define SBCNTRL2_BTSE 0x80000000 /* burst enable */ - -/* memory bus controller */ -#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */ -#define SDBASE_CE 0x00000001 /* chip enable */ -#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */ -#define SDBASE_CBAM_SHIFT 16 -#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */ - -#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */ -#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */ -#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */ -#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */ -#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */ -#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */ -#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */ -#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */ -#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */ -#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */ -#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */ -#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */ -#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */ -#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */ -#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */ -#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */ -#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */ -#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */ - -#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */ -#define SDREFCNT_PERI 0x00000fff /* refresh period */ - -#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_BUSCTL_REGS_H */ diff --git a/include/asm-mn10300/byteorder.h b/include/asm-mn10300/byteorder.h deleted file mode 100644 index 5dd0bdd9feee..000000000000 --- a/include/asm-mn10300/byteorder.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_BYTEORDER_H -#define _ASM_BYTEORDER_H - -#include <linux/byteorder/little_endian.h> - -#endif /* _ASM_BYTEORDER_H */ diff --git a/include/asm-mn10300/cache.h b/include/asm-mn10300/cache.h deleted file mode 100644 index 9e01122208a9..000000000000 --- a/include/asm-mn10300/cache.h +++ /dev/null @@ -1,54 +0,0 @@ -/* MN10300 cache management registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_CACHE_H -#define _ASM_CACHE_H - -#include <asm/cpu-regs.h> -#include <asm/proc/cache.h> - -#ifndef __ASSEMBLY__ -#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES) -#else -#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES -#endif - -/* data cache purge registers - * - read from the register to unconditionally purge that cache line - * - write address & 0xffffff00 to conditionally purge that cache line - * - clear LSB to request invalidation as well - */ -#define DCACHE_PURGE(WAY, ENTRY) \ - __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \ - (ENTRY) * L1_CACHE_BYTES, u32) - -#define DCACHE_PURGE_WAY0(ENTRY) \ - __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) -#define DCACHE_PURGE_WAY1(ENTRY) \ - __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) -#define DCACHE_PURGE_WAY2(ENTRY) \ - __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) -#define DCACHE_PURGE_WAY3(ENTRY) \ - __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) - -/* instruction cache access registers */ -#define ICACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) -#define ICACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) - -/* instruction cache access registers */ -#define DCACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) -#define DCACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) - -#endif /* _ASM_CACHE_H */ diff --git a/include/asm-mn10300/cacheflush.h b/include/asm-mn10300/cacheflush.h deleted file mode 100644 index 2db746a251f8..000000000000 --- a/include/asm-mn10300/cacheflush.h +++ /dev/null @@ -1,116 +0,0 @@ -/* MN10300 Cache flushing - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CACHEFLUSH_H -#define _ASM_CACHEFLUSH_H - -#ifndef __ASSEMBLY__ - -/* Keep includes the same across arches. */ -#include <linux/mm.h> - -/* - * virtually-indexed cache managment (our cache is physically indexed) - */ -#define flush_cache_all() do {} while (0) -#define flush_cache_mm(mm) do {} while (0) -#define flush_cache_dup_mm(mm) do {} while (0) -#define flush_cache_range(mm, start, end) do {} while (0) -#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) -#define flush_cache_vmap(start, end) do {} while (0) -#define flush_cache_vunmap(start, end) do {} while (0) -#define flush_dcache_page(page) do {} while (0) -#define flush_dcache_mmap_lock(mapping) do {} while (0) -#define flush_dcache_mmap_unlock(mapping) do {} while (0) - -/* - * physically-indexed cache managment - */ -#ifndef CONFIG_MN10300_CACHE_DISABLED - -extern void flush_icache_range(unsigned long start, unsigned long end); -extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); - -#else - -#define flush_icache_range(start, end) do {} while (0) -#define flush_icache_page(vma, pg) do {} while (0) - -#endif - -#define flush_icache_user_range(vma, pg, adr, len) \ - flush_icache_range(adr, adr + len) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_icache_page(vma, page); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -/* - * primitive routines - */ -#ifndef CONFIG_MN10300_CACHE_DISABLED -extern void mn10300_icache_inv(void); -extern void mn10300_dcache_inv(void); -extern void mn10300_dcache_inv_page(unsigned start); -extern void mn10300_dcache_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_inv_range2(unsigned start, unsigned size); -#ifdef CONFIG_MN10300_CACHE_WBACK -extern void mn10300_dcache_flush(void); -extern void mn10300_dcache_flush_page(unsigned start); -extern void mn10300_dcache_flush_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_range2(unsigned start, unsigned size); -extern void mn10300_dcache_flush_inv(void); -extern void mn10300_dcache_flush_inv_page(unsigned start); -extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); -#else -#define mn10300_dcache_flush() do {} while (0) -#define mn10300_dcache_flush_page(start) do {} while (0) -#define mn10300_dcache_flush_range(start, end) do {} while (0) -#define mn10300_dcache_flush_range2(start, size) do {} while (0) -#define mn10300_dcache_flush_inv() mn10300_dcache_inv() -#define mn10300_dcache_flush_inv_page(start) \ - mn10300_dcache_inv_page((start)) -#define mn10300_dcache_flush_inv_range(start, end) \ - mn10300_dcache_inv_range((start), (end)) -#define mn10300_dcache_flush_inv_range2(start, size) \ - mn10300_dcache_inv_range2((start), (size)) -#endif /* CONFIG_MN10300_CACHE_WBACK */ -#else -#define mn10300_icache_inv() do {} while (0) -#define mn10300_dcache_inv() do {} while (0) -#define mn10300_dcache_inv_page(start) do {} while (0) -#define mn10300_dcache_inv_range(start, end) do {} while (0) -#define mn10300_dcache_inv_range2(start, size) do {} while (0) -#define mn10300_dcache_flush() do {} while (0) -#define mn10300_dcache_flush_inv_page(start) do {} while (0) -#define mn10300_dcache_flush_inv() do {} while (0) -#define mn10300_dcache_flush_inv_range(start, end) do {} while (0) -#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0) -#define mn10300_dcache_flush_page(start) do {} while (0) -#define mn10300_dcache_flush_range(start, end) do {} while (0) -#define mn10300_dcache_flush_range2(start, size) do {} while (0) -#endif /* CONFIG_MN10300_CACHE_DISABLED */ - -/* - * internal debugging function - */ -#ifdef CONFIG_DEBUG_PAGEALLOC -extern void kernel_map_pages(struct page *page, int numpages, int enable); -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_CACHEFLUSH_H */ diff --git a/include/asm-mn10300/checksum.h b/include/asm-mn10300/checksum.h deleted file mode 100644 index 9fb2a8d8826a..000000000000 --- a/include/asm-mn10300/checksum.h +++ /dev/null @@ -1,86 +0,0 @@ -/* MN10300 Optimised checksumming code - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CHECKSUM_H -#define _ASM_CHECKSUM_H - -extern __wsum csum_partial(const void *buff, int len, __wsum sum); -extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); -extern __wsum csum_partial_copy_from_user(const void *src, void *dst, - int len, __wsum sum, - int *err_ptr); -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); -extern __wsum csum_partial(const void *buff, int len, __wsum sum); -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define csum_partial_copy_fromuser csum_partial_copy -extern __wsum csum_partial_copy(const void *src, void *dst, int len, - __wsum sum); - -static inline __sum16 csum_fold(__wsum sum) -{ - asm( - " add %1,%0 \n" - " addc 0xffff,%0 \n" - : "=r" (sum) - : "r" (sum << 16), "0" (sum & 0xffff0000) - : "cc" - ); - return (~sum) >> 16; -} - -static inline __wsum csum_tcpudp_nofold(unsigned long saddr, - unsigned long daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - __wsum tmp; - - tmp = (__wsum) ntohs(len) << 16; - tmp += (__wsum) proto << 8; - - asm( - " add %1,%0 \n" - " addc %2,%0 \n" - " addc %3,%0 \n" - " addc 0,%0 \n" - : "=r" (sum) - : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum) - : "cc" - ); - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(unsigned long saddr, - unsigned long daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -#undef _HAVE_ARCH_IPV6_CSUM - -/* - * Copy and checksum to user - */ -#define HAVE_CSUM_COPY_USER -extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len, - __wsum sum, int *err_ptr); - - -#endif /* _ASM_CHECKSUM_H */ diff --git a/include/asm-mn10300/cpu-regs.h b/include/asm-mn10300/cpu-regs.h deleted file mode 100644 index 757e9b5388ea..000000000000 --- a/include/asm-mn10300/cpu-regs.h +++ /dev/null @@ -1,290 +0,0 @@ -/* MN10300 Core system registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CPU_REGS_H -#define _ASM_CPU_REGS_H - -#ifndef __ASSEMBLY__ -#include <linux/types.h> -#endif - -#ifdef CONFIG_MN10300_CPU_AM33V2 -/* we tell the compiler to pretend to be AM33 so that it doesn't try and use - * the FP regs, but tell the assembler that we're actually allowed AM33v2 - * instructions */ -#ifndef __ASSEMBLY__ -asm(" .am33_2\n"); -#else -.am33_2 -#endif -#endif - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR)) -#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR)) -#else -#define __SYSREG(ADDR, TYPE) ADDR -#define __SYSREGC(ADDR, TYPE) ADDR -#endif - -/* CPU registers */ -#define EPSW_FLAG_Z 0x00000001 /* zero flag */ -#define EPSW_FLAG_N 0x00000002 /* negative flag */ -#define EPSW_FLAG_C 0x00000004 /* carry flag */ -#define EPSW_FLAG_V 0x00000008 /* overflow flag */ -#define EPSW_IM 0x00000700 /* interrupt mode */ -#define EPSW_IM_0 0x00000000 /* interrupt mode 0 */ -#define EPSW_IM_1 0x00000100 /* interrupt mode 1 */ -#define EPSW_IM_2 0x00000200 /* interrupt mode 2 */ -#define EPSW_IM_3 0x00000300 /* interrupt mode 3 */ -#define EPSW_IM_4 0x00000400 /* interrupt mode 4 */ -#define EPSW_IM_5 0x00000500 /* interrupt mode 5 */ -#define EPSW_IM_6 0x00000600 /* interrupt mode 6 */ -#define EPSW_IM_7 0x00000700 /* interrupt mode 7 */ -#define EPSW_IE 0x00000800 /* interrupt enable */ -#define EPSW_S 0x00003000 /* software auxilliary bits */ -#define EPSW_T 0x00008000 /* trace enable */ -#define EPSW_nSL 0x00010000 /* not supervisor level */ -#define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */ -#define EPSW_nAR 0x00040000 /* register bank control */ -#define EPSW_ML 0x00080000 /* monitor level */ -#define EPSW_FE 0x00100000 /* FPU enable */ - -/* FPU registers */ -#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */ -#define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */ -#define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */ -#define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */ -#define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */ -#define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */ -#define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */ -#define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */ -#define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */ -#define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */ -#define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */ -#define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */ -#define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */ -#define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */ -#define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */ -#define FPCR_RM 0x00030000 /* rounding mode */ -#define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */ -#define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */ -#define FPCR_FCC_E 0x00080000 /* FPU equal condition code */ -#define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */ -#define FPCR_FCC_L 0x00200000 /* FPU less than condition code */ -#define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */ - -/* CPU control registers */ -#define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */ -#define CPUP_DWBD 0x0020 /* write buffer disable flag */ -#define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */ -#define CPUP_EXM 0x0080 /* exception operation mode */ -#define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */ -#define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */ - -#define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */ -#define CPUM_SLEEP 0x0004 /* set to enter sleep state */ -#define CPUM_HALT 0x0008 /* set to enter halt state */ -#define CPUM_STOP 0x0010 /* set to enter stop state */ - -#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */ -#define CPUREV_TYPE 0x0000000f /* CPU type */ -#define CPUREV_TYPE_S 0 -#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */ -#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */ -#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */ -#define CPUREV_REVISION 0x000000f0 /* CPU revision */ -#define CPUREV_REVISION_S 4 -#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */ -#define CPUREV_ICWAY_S 8 -#define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */ -#define CPUREV_ICSIZE_S 12 -#define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */ -#define CPUREV_DCWAY_S 16 -#define CPUREV_DCSIZE 0x00f00000 /* data cache way size */ -#define CPUREV_DCSIZE_S 20 -#define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */ -#define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */ -#define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */ - -#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */ - -/* interrupt/exception control registers */ -#define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */ -#define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */ -#define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */ -#define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */ -#define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */ -#define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */ -#define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */ - -#define TBR __SYSREG(0xc0000024, u32) /* Trap table base */ -#define TBR_TB 0xff000000 /* table base address bits 31-24 */ -#define TBR_INT_CODE 0x00ffffff /* interrupt code */ - -#define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */ - -#define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */ -#define sISR_IRQICE 0x00000001 /* ICE interrupt */ -#define sISR_ISTEP 0x00000002 /* single step interrupt */ -#define sISR_MISSA 0x00000004 /* memory access address misalignment fault */ -#define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */ -#define sISR_PIEXE 0x00000010 /* program interrupt */ -#define sISR_MEMERR 0x00000020 /* illegal memory access fault */ -#define sISR_IBREAK 0x00000040 /* instraction break interrupt */ -#define sISR_DBSRL 0x00000080 /* debug serial interrupt */ -#define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */ -#define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */ -#define sISR_OBREAK 0x00000400 /* operand break interrupt */ -#define sISR_PRIV 0x00000800 /* privileged instruction execution fault */ -#define sISR_BUSERR 0x00001000 /* bus error fault */ -#define sISR_DBLFT 0x00002000 /* double fault */ -#define sISR_DBG 0x00008000 /* debug reserved interrupt */ -#define sISR_ITMISS 0x00010000 /* instruction TLB miss */ -#define sISR_DTMISS 0x00020000 /* data TLB miss */ -#define sISR_ITEX 0x00040000 /* instruction TLB access exception */ -#define sISR_DTEX 0x00080000 /* data TLB access exception */ -#define sISR_ILGIA 0x00100000 /* illegal instruction access exception */ -#define sISR_ILGDA 0x00200000 /* illegal data access exception */ -#define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */ -#define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */ -#define sISR_PRIDA 0x01000000 /* privileged space data access excep */ -#define sISR_DISA 0x02000000 /* data space instruction access excep */ -#define sISR_SYSC 0x04000000 /* system call instruction excep */ -#define sISR_FPUD 0x08000000 /* FPU disabled excep */ -#define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */ -#define sISR_FPUOP 0x20000000 /* FPU operation excep */ -#define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */ - -/* cache control registers */ -#define CHCTR __SYSREG(0xc0000070, u16) /* cache control */ -#define CHCTR_ICEN 0x0001 /* instruction cache enable */ -#define CHCTR_DCEN 0x0002 /* data cache enable */ -#define CHCTR_ICBUSY 0x0004 /* instruction cache busy */ -#define CHCTR_DCBUSY 0x0008 /* data cache busy */ -#define CHCTR_ICINV 0x0010 /* instruction cache invalidate */ -#define CHCTR_DCINV 0x0020 /* data cache invalidate */ -#define CHCTR_DCWTMD 0x0040 /* data cache writing mode */ -#define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */ -#define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */ -#define CHCTR_DCALMD 0x0080 /* data cache allocation mode */ -#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */ -#define CHCTR_DCWMD 0xf000 /* data cache way mode */ - -/* MMU control registers */ -#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */ -#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */ -#define MMUCTR_ITE 0x00000040 /* instruction TLB enable */ -#define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */ -#define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */ -#define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */ -#define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */ -#define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */ -#define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */ -#define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */ -#define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */ -#define MMUCTR_CE 0x00008000 /* cacheable bit enable */ -#define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */ -#define MMUCTR_DTE 0x00400000 /* data TLB enable */ -#define MMUCTR_DIV 0x00800000 /* data TLB invalidate */ -#define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */ -#define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */ -#define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */ -#define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */ -#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */ -#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */ -#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */ - -#define PIDR __SYSREG(0xc0000094, u16) /* PID register */ -#define PIDR_PID 0x00ff /* process identifier */ - -#define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */ - -#define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */ -#define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */ -#define xPTEL_V 0x00000001 /* TLB entry valid */ -#define xPTEL_UNUSED1 0x00000002 /* unused bit */ -#define xPTEL_UNUSED2 0x00000004 /* unused bit */ -#define xPTEL_C 0x00000008 /* cached if set */ -#define xPTEL_PV 0x00000010 /* page valid */ -#define xPTEL_D 0x00000020 /* dirty */ -#define xPTEL_PR 0x000001c0 /* page protection */ -#define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */ -#define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */ -#define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */ -#define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */ -#define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */ -#define xPTEL_G 0x00000200 /* global (use PID if 0) */ -#define xPTEL_PS 0x00000c00 /* page size */ -#define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */ -#define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */ -#define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */ -#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */ -#define xPTEL_PPN 0xfffff006 /* physical page number */ - -#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */ -#define xPTEL_UNUSED1_BIT 1 -#define xPTEL_UNUSED2_BIT 2 -#define xPTEL_C_BIT 3 -#define xPTEL_PV_BIT 4 -#define xPTEL_D_BIT 5 -#define xPTEL_G_BIT 9 - -#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */ -#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */ -#define xPTEU_VPN 0xfffffc00 /* virtual page number */ -#define xPTEU_PID 0x000000ff /* process identifier to which applicable */ - -#define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */ -#define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */ -#define xPTEL2_V 0x00000001 /* TLB entry valid */ -#define xPTEL2_C 0x00000002 /* cacheable */ -#define xPTEL2_PV 0x00000004 /* page valid */ -#define xPTEL2_D 0x00000008 /* dirty */ -#define xPTEL2_PR 0x00000070 /* page protection */ -#define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */ -#define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */ -#define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */ -#define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */ -#define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */ -#define xPTEL2_G 0x00000080 /* global (use PID if 0) */ -#define xPTEL2_PS 0x00000300 /* page size */ -#define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */ -#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */ -#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */ -#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */ -#define xPTEL2_PPN 0xfffffc00 /* physical page number */ - -#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */ -#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */ -#define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */ -#define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */ -#define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */ -#define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */ -#define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */ -#define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */ -#define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */ -#define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */ -#define MMUFCR_xFC_TYPE 0x0020 /* access type flag */ -#define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */ -#define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */ -#define MMUFCR_xFC_PR 0x01c0 /* page protection flag */ -#define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */ -#define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */ -#define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */ -#define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */ -#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */ -#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_CPU_REGS_H */ diff --git a/include/asm-mn10300/cputime.h b/include/asm-mn10300/cputime.h deleted file mode 100644 index 6d68ad7e0ea3..000000000000 --- a/include/asm-mn10300/cputime.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/cputime.h> diff --git a/include/asm-mn10300/current.h b/include/asm-mn10300/current.h deleted file mode 100644 index ca6027d83743..000000000000 --- a/include/asm-mn10300/current.h +++ /dev/null @@ -1,37 +0,0 @@ -/* MN10300 Current task structure accessor - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CURRENT_H -#define _ASM_CURRENT_H - -#include <linux/thread_info.h> - -/* - * dedicate E2 to keeping the current task pointer - */ -#ifdef CONFIG_MN10300_CURRENT_IN_E2 - -register struct task_struct *const current asm("e2") __attribute__((used)); - -#define get_current() current - -extern struct task_struct *__current; - -#else -static inline __attribute__((const)) -struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() -#endif - -#endif /* _ASM_CURRENT_H */ diff --git a/include/asm-mn10300/delay.h b/include/asm-mn10300/delay.h deleted file mode 100644 index 34517b359399..000000000000 --- a/include/asm-mn10300/delay.h +++ /dev/null @@ -1,19 +0,0 @@ -/* MN10300 Uninterruptible delay routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DELAY_H -#define _ASM_DELAY_H - -extern void __udelay(unsigned long usecs); -extern void __delay(unsigned long loops); - -#define udelay(n) __udelay(n) - -#endif /* _ASM_DELAY_H */ diff --git a/include/asm-mn10300/device.h b/include/asm-mn10300/device.h deleted file mode 100644 index f0a4c256403b..000000000000 --- a/include/asm-mn10300/device.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/device.h> diff --git a/include/asm-mn10300/div64.h b/include/asm-mn10300/div64.h deleted file mode 100644 index 3a8329b3e869..000000000000 --- a/include/asm-mn10300/div64.h +++ /dev/null @@ -1,100 +0,0 @@ -/* MN10300 64-bit division - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DIV64 -#define _ASM_DIV64 - -#include <linux/types.h> - -extern void ____unhandled_size_in_do_div___(void); - -/* - * divide n by base, leaving the result in n and returning the remainder - * - we can do this quite efficiently on the MN10300 by cascading the divides - * through the MDR register - */ -#define do_div(n, base) \ -({ \ - unsigned __rem = 0; \ - if (sizeof(n) <= 4) { \ - asm("mov %1,mdr \n" \ - "divu %2,%0 \n" \ - "mov mdr,%1 \n" \ - : "+r"(n), "=d"(__rem) \ - : "r"(base), "1"(__rem) \ - : "cc" \ - ); \ - } else if (sizeof(n) <= 8) { \ - union { \ - unsigned long long l; \ - u32 w[2]; \ - } __quot; \ - __quot.l = n; \ - asm("mov %0,mdr \n" /* MDR = 0 */ \ - "divu %3,%1 \n" \ - /* __quot.MSL = __div.MSL / base, */ \ - /* MDR = MDR:__div.MSL % base */ \ - "divu %3,%2 \n" \ - /* __quot.LSL = MDR:__div.LSL / base, */ \ - /* MDR = MDR:__div.LSL % base */ \ - "mov mdr,%0 \n" \ - : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \ - : "r"(base), "0"(__rem), "1"(__quot.w[1]), \ - "2"(__quot.w[0]) \ - : "cc" \ - ); \ - n = __quot.l; \ - } else { \ - ____unhandled_size_in_do_div___(); \ - } \ - __rem; \ -}) - -/* - * do an unsigned 32-bit multiply and divide with intermediate 64-bit product - * so as not to lose accuracy - * - we use the MDR register to hold the MSW of the product - */ -static inline __attribute__((const)) -unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div) -{ - unsigned result; - - asm("mulu %2,%0 \n" /* MDR:val = val*mult */ - "divu %3,%0 \n" /* val = MDR:val/div; - * MDR = MDR:val%div */ - : "=r"(result) - : "0"(val), "ir"(mult), "r"(div) - ); - - return result; -} - -/* - * do a signed 32-bit multiply and divide with intermediate 64-bit product so - * as not to lose accuracy - * - we use the MDR register to hold the MSW of the product - */ -static inline __attribute__((const)) -signed __muldiv64s(signed val, signed mult, signed div) -{ - signed result; - - asm("mul %2,%0 \n" /* MDR:val = val*mult */ - "div %3,%0 \n" /* val = MDR:val/div; - * MDR = MDR:val%div */ - : "=r"(result) - : "0"(val), "ir"(mult), "r"(div) - ); - - return result; -} - -#endif /* _ASM_DIV64 */ diff --git a/include/asm-mn10300/dma-mapping.h b/include/asm-mn10300/dma-mapping.h deleted file mode 100644 index ccae8f6c6326..000000000000 --- a/include/asm-mn10300/dma-mapping.h +++ /dev/null @@ -1,234 +0,0 @@ -/* DMA mapping routines for the MN10300 arch - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H - -#include <linux/mm.h> -#include <linux/scatterlist.h> - -#include <asm/cache.h> -#include <asm/io.h> - -extern void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag); - -extern void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f)) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h)) - -/* - * Map a single buffer of the indicated size for DMA in streaming mode. The - * 32-bit bus address to use is returned. - * - * Once the device is given the dma address, the device owns this memory until - * either pci_unmap_single or pci_dma_sync_single is performed. - */ -static inline -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - mn10300_dcache_flush_inv(); - return virt_to_bus(ptr); -} - -/* - * Unmap a single streaming mode DMA translation. The dma_addr and size must - * match what was provided for in a previous pci_map_single call. All other - * usages are undefined. - * - * After this call, reads by the cpu to the buffer are guarenteed to see - * whatever the device wrote there. - */ -static inline -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -/* - * Map a set of buffers described by scatterlist in streaming mode for DMA. - * This is the scather-gather version of the above pci_map_single interface. - * Here the scatter gather list elements are each tagged with the appropriate - * dma address and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of DMA - * address/length pairs than there are SG table elements. (for example - * via virtual mapping capabilities) The routine returns the number of - * addr/length pairs actually used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are the same - * here. - */ -static inline -int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nents == 0 || sglist[0].length == 0); - - for_each_sg(sglist, sg, nents, i) { - BUG_ON(!sg_page(sg)); - - sg->dma_address = sg_phys(sg); - } - - mn10300_dcache_flush_inv(); - return nents; -} - -/* - * Unmap a set of streaming mode DMA translations. - * Again, cpu read rules concerning calls here are the same as for - * pci_unmap_single() above. - */ -static inline -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); -} - -/* - * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical - * to pci_map_single, but takes a struct page instead of a virtual address - */ -static inline -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - return page_to_bus(page) + offset; -} - -static inline -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -/* - * Make physical memory consistent for a single streaming mode DMA translation - * after a transfer. - * - * If you perform a pci_map_single() but wish to interrogate the buffer using - * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this - * function before doing so. At the next point you give the PCI dma address - * back to the card, the device again owns the buffer. - */ -static inline -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ -} - -static inline -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - -static inline -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - - -/* - * Make physical memory consistent for a set of streaming mode DMA translations - * after a transfer. - * - * The same as pci_dma_sync_single but for a scatter-gather list, same rules - * and usage. - */ -static inline -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction direction) -{ -} - -static inline -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - -static inline -int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return 0; -} - -/* - * Return whether the given PCI device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits during - * PCI bus mastering, then you would pass 0x00ffffff as the mask to this - * function. - */ -static inline -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, so we can't - * guarantee allocations that must be within a tighter range than - * GFP_DMA - */ - if (mask < 0x00ffffff) - return 0; - return 1; -} - -static inline -int dma_set_mask(struct device *dev, u64 mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - return 0; -} - -static inline -int dma_get_cache_alignment(void) -{ - return 1 << L1_CACHE_SHIFT; -} - -#define dma_is_consistent(d) (1) - -static inline -void dma_cache_sync(void *vaddr, size_t size, - enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - -#endif diff --git a/include/asm-mn10300/dma.h b/include/asm-mn10300/dma.h deleted file mode 100644 index 098df2e617ab..000000000000 --- a/include/asm-mn10300/dma.h +++ /dev/null @@ -1,118 +0,0 @@ -/* MN10300 ISA DMA handlers and definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -#include <asm/system.h> -#include <linux/spinlock.h> -#include <asm/io.h> -#include <linux/delay.h> - -#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */ -#define MAX_DMA_ADDRESS 0xbfffffff - -extern spinlock_t dma_spin_lock; - -static inline unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static inline void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static inline void enable_dma(unsigned int dmanr) -{ -} - -static inline void disable_dma(unsigned int dmanr) -{ -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static inline void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static inline void set_dma_mode(unsigned int dmanr, char mode) -{ -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static inline void set_dma_page(unsigned int dmanr, char pagenr) -{ -} - - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static inline void set_dma_addr(unsigned int dmanr, unsigned int a) -{ -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static inline void set_dma_count(unsigned int dmanr, unsigned int count) -{ -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static inline int get_dma_residue(unsigned int dmanr) -{ - return 0; -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char *device_id); -extern void free_dma(unsigned int dmanr); - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_DMA_H */ diff --git a/include/asm-mn10300/dmactl-regs.h b/include/asm-mn10300/dmactl-regs.h deleted file mode 100644 index 58a199da0f4a..000000000000 --- a/include/asm-mn10300/dmactl-regs.h +++ /dev/null @@ -1,101 +0,0 @@ -/* MN10300 on-board DMA controller registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DMACTL_REGS_H -#define _ASM_DMACTL_REGS_H - -#include <asm/cpu-regs.h> - -#ifdef __KERNEL__ - -/* DMA registers */ -#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ -#define DMxCTR_BG 0x0000001f /* transfer request source */ -#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ -#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ -#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ -#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ -#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ -#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ -#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ -#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ -#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ -#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ -#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ -#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ -#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ -#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ -#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ -#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ -#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ -#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ -#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ -#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ -#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ -#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ -#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ -#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ -#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ -#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ -#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ -#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ -#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ -#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ -#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ -#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ -#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ -#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ -#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ -#define DMxCTR_RQM 0x00060000 /* external request input source mode */ -#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ -#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ -#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ -#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ -#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ -#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ - -#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ - -#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ - -#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ -#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ - -#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent - * size reg */ -#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ - -#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ -#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ -#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ -#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ - -#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ -#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ -#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ -#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ - -#ifndef __ASSEMBLY__ - -struct mn10300_dmactl_regs { - u32 ctr; - const void *src; - void *dst; - u32 siz; - u32 cyc; -} __attribute__((aligned(0x100))); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_DMACTL_REGS_H */ diff --git a/include/asm-mn10300/elf.h b/include/asm-mn10300/elf.h deleted file mode 100644 index bf09f8bb392e..000000000000 --- a/include/asm-mn10300/elf.h +++ /dev/null @@ -1,147 +0,0 @@ -/* MN10300 ELF constant and register definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_ELF_H -#define _ASM_ELF_H - -#include <linux/utsname.h> -#include <asm/ptrace.h> -#include <asm/user.h> - -/* - * AM33 relocations - */ -#define R_MN10300_NONE 0 /* No reloc. */ -#define R_MN10300_32 1 /* Direct 32 bit. */ -#define R_MN10300_16 2 /* Direct 16 bit. */ -#define R_MN10300_8 3 /* Direct 8 bit. */ -#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */ -#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */ -#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */ -#define R_MN10300_24 9 /* Direct 24 bit. */ -#define R_MN10300_RELATIVE 23 /* Adjust by program base. */ - -/* - * ELF register definitions.. - */ -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -#define ELF_NFPREG 32 -typedef float elf_fpreg_t; - -typedef struct { - elf_fpreg_t fpregs[ELF_NFPREG]; - u_int32_t fpcr; -} elf_fpregset_t; - -extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); - -/* - * This is used to ensure we don't load something for the wrong architecture - */ -#define elf_check_arch(x) \ - (((x)->e_machine == EM_CYGNUS_MN10300) || \ - ((x)->e_machine == EM_MN10300)) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2LSB -#define ELF_ARCH EM_MN10300 - -/* - * ELF process initialiser - */ -#define ELF_PLAT_INIT(_r, load_addr) \ -do { \ - struct pt_regs *_ur = current->thread.uregs; \ - _ur->a3 = 0; _ur->a2 = 0; _ur->d3 = 0; _ur->d2 = 0; \ - _ur->mcvf = 0; _ur->mcrl = 0; _ur->mcrh = 0; _ur->mdrq = 0; \ - _ur->e1 = 0; _ur->e0 = 0; _ur->e7 = 0; _ur->e6 = 0; \ - _ur->e5 = 0; _ur->e4 = 0; _ur->e3 = 0; _ur->e2 = 0; \ - _ur->lar = 0; _ur->lir = 0; _ur->mdr = 0; \ - _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \ -} while (0) - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* - * This is the location that an ET_DYN program is loaded if exec'ed. Typical - * use of this is to invoke "./ld.so someprog" to test out a new version of - * the loader. We need to make sure that it is out of the way of the program - * that it will "exec", and that there is sufficient room for the brk. - * - must clear the VMALLOC area - */ -#define ELF_ET_DYN_BASE 0x04000000 - -/* - * regs is struct pt_regs, pr_reg is elf_gregset_t (which is - * now struct user_regs, they are different) - * - ELF_CORE_COPY_REGS has been guessed, and may be wrong - */ -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ -do { \ - pr_reg[0] = regs->a3; \ - pr_reg[1] = regs->a2; \ - pr_reg[2] = regs->d3; \ - pr_reg[3] = regs->d2; \ - pr_reg[4] = regs->mcvf; \ - pr_reg[5] = regs->mcrl; \ - pr_reg[6] = regs->mcrh; \ - pr_reg[7] = regs->mdrq; \ - pr_reg[8] = regs->e1; \ - pr_reg[9] = regs->e0; \ - pr_reg[10] = regs->e7; \ - pr_reg[11] = regs->e6; \ - pr_reg[12] = regs->e5; \ - pr_reg[13] = regs->e4; \ - pr_reg[14] = regs->e3; \ - pr_reg[15] = regs->e2; \ - pr_reg[16] = regs->sp; \ - pr_reg[17] = regs->lar; \ - pr_reg[18] = regs->lir; \ - pr_reg[19] = regs->mdr; \ - pr_reg[20] = regs->a1; \ - pr_reg[21] = regs->a0; \ - pr_reg[22] = regs->d1; \ - pr_reg[23] = regs->d0; \ - pr_reg[24] = regs->orig_d0; \ - pr_reg[25] = regs->epsw; \ - pr_reg[26] = regs->pc; \ -} while (0); - -/* - * This yields a mask that user programs can use to figure out what - * instruction set this CPU supports. This could be done in user space, - * but it's not easy, and we've already done it here. - */ -#define ELF_HWCAP (0) - -/* - * This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in - * intent than poking at uname or /proc/cpuinfo. - * - * For the moment, we have only optimizations for the Intel generations, - * but that could change... - */ -#define ELF_PLATFORM (NULL) - -#ifdef __KERNEL__ -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) -#endif - -#endif /* _ASM_ELF_H */ diff --git a/include/asm-mn10300/emergency-restart.h b/include/asm-mn10300/emergency-restart.h deleted file mode 100644 index 3711bd9d50bd..000000000000 --- a/include/asm-mn10300/emergency-restart.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/emergency-restart.h> diff --git a/include/asm-mn10300/errno.h b/include/asm-mn10300/errno.h deleted file mode 100644 index 4c82b503d92f..000000000000 --- a/include/asm-mn10300/errno.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/errno.h> diff --git a/include/asm-mn10300/exceptions.h b/include/asm-mn10300/exceptions.h deleted file mode 100644 index fa16466ef3f9..000000000000 --- a/include/asm-mn10300/exceptions.h +++ /dev/null @@ -1,121 +0,0 @@ -/* MN10300 Microcontroller core exceptions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_EXCEPTIONS_H -#define _ASM_EXCEPTIONS_H - -#include <linux/linkage.h> - -/* - * define the breakpoint instruction opcode to use - * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can - * (can use 0xF7) - */ -#define GDBSTUB_BKPT 0xFF - -#ifndef __ASSEMBLY__ - -/* - * enumeration of exception codes (as extracted from TBR MSW) - */ -enum exception_code { - EXCEP_RESET = 0x000000, /* reset */ - - /* MMU exceptions */ - EXCEP_ITLBMISS = 0x000100, /* instruction TLB miss */ - EXCEP_DTLBMISS = 0x000108, /* data TLB miss */ - EXCEP_IAERROR = 0x000110, /* instruction address */ - EXCEP_DAERROR = 0x000118, /* data address */ - - /* system exceptions */ - EXCEP_TRAP = 0x000128, /* program interrupt (PI instruction) */ - EXCEP_ISTEP = 0x000130, /* single step */ - EXCEP_IBREAK = 0x000150, /* instruction breakpoint */ - EXCEP_OBREAK = 0x000158, /* operand breakpoint */ - EXCEP_PRIVINS = 0x000160, /* privileged instruction execution */ - EXCEP_UNIMPINS = 0x000168, /* unimplemented instruction execution */ - EXCEP_UNIMPEXINS = 0x000170, /* unimplemented extended instruction execution */ - EXCEP_MEMERR = 0x000178, /* illegal memory access */ - EXCEP_MISALIGN = 0x000180, /* misalignment */ - EXCEP_BUSERROR = 0x000188, /* bus error */ - EXCEP_ILLINSACC = 0x000190, /* illegal instruction access */ - EXCEP_ILLDATACC = 0x000198, /* illegal data access */ - EXCEP_IOINSACC = 0x0001a0, /* I/O space instruction access */ - EXCEP_PRIVINSACC = 0x0001a8, /* privileged space instruction access */ - EXCEP_PRIVDATACC = 0x0001b0, /* privileged space data access */ - EXCEP_DATINSACC = 0x0001b8, /* data space instruction access */ - EXCEP_DOUBLE_FAULT = 0x000200, /* double fault */ - - /* FPU exceptions */ - EXCEP_FPU_DISABLED = 0x0001c0, /* FPU disabled */ - EXCEP_FPU_UNIMPINS = 0x0001c8, /* FPU unimplemented operation */ - EXCEP_FPU_OPERATION = 0x0001d0, /* FPU operation */ - - /* interrupts */ - EXCEP_WDT = 0x000240, /* watchdog timer overflow */ - EXCEP_NMI = 0x000248, /* non-maskable interrupt */ - EXCEP_IRQ_LEVEL0 = 0x000280, /* level 0 maskable interrupt */ - EXCEP_IRQ_LEVEL1 = 0x000288, /* level 1 maskable interrupt */ - EXCEP_IRQ_LEVEL2 = 0x000290, /* level 2 maskable interrupt */ - EXCEP_IRQ_LEVEL3 = 0x000298, /* level 3 maskable interrupt */ - EXCEP_IRQ_LEVEL4 = 0x0002a0, /* level 4 maskable interrupt */ - EXCEP_IRQ_LEVEL5 = 0x0002a8, /* level 5 maskable interrupt */ - EXCEP_IRQ_LEVEL6 = 0x0002b0, /* level 6 maskable interrupt */ - - /* system calls */ - EXCEP_SYSCALL0 = 0x000300, /* system call 0 */ - EXCEP_SYSCALL1 = 0x000308, /* system call 1 */ - EXCEP_SYSCALL2 = 0x000310, /* system call 2 */ - EXCEP_SYSCALL3 = 0x000318, /* system call 3 */ - EXCEP_SYSCALL4 = 0x000320, /* system call 4 */ - EXCEP_SYSCALL5 = 0x000328, /* system call 5 */ - EXCEP_SYSCALL6 = 0x000330, /* system call 6 */ - EXCEP_SYSCALL7 = 0x000338, /* system call 7 */ - EXCEP_SYSCALL8 = 0x000340, /* system call 8 */ - EXCEP_SYSCALL9 = 0x000348, /* system call 9 */ - EXCEP_SYSCALL10 = 0x000350, /* system call 10 */ - EXCEP_SYSCALL11 = 0x000358, /* system call 11 */ - EXCEP_SYSCALL12 = 0x000360, /* system call 12 */ - EXCEP_SYSCALL13 = 0x000368, /* system call 13 */ - EXCEP_SYSCALL14 = 0x000370, /* system call 14 */ - EXCEP_SYSCALL15 = 0x000378, /* system call 15 */ -}; - -extern void __set_intr_stub(enum exception_code code, void *handler); -extern void set_intr_stub(enum exception_code code, void *handler); -extern void set_jtag_stub(enum exception_code code, void *handler); - -struct pt_regs; - -extern asmlinkage void __common_exception(void); -extern asmlinkage void itlb_miss(void); -extern asmlinkage void dtlb_miss(void); -extern asmlinkage void itlb_aerror(void); -extern asmlinkage void dtlb_aerror(void); -extern asmlinkage void raw_bus_error(void); -extern asmlinkage void double_fault(void); -extern asmlinkage int system_call(struct pt_regs *); -extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); -extern asmlinkage void nmi(struct pt_regs *, enum exception_code); -extern asmlinkage void uninitialised_exception(struct pt_regs *, - enum exception_code); -extern asmlinkage void irq_handler(void); -extern asmlinkage void profile_handler(void); -extern asmlinkage void nmi_handler(void); -extern asmlinkage void misalignment(struct pt_regs *, enum exception_code); - -extern void die(const char *, struct pt_regs *, enum exception_code) - ATTRIB_NORET; - -extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code); - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_EXCEPTIONS_H */ diff --git a/include/asm-mn10300/fb.h b/include/asm-mn10300/fb.h deleted file mode 100644 index 697b24a91e1a..000000000000 --- a/include/asm-mn10300/fb.h +++ /dev/null @@ -1,23 +0,0 @@ -/* MN10300 Frame buffer stuff - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_FB_H -#define _ASM_FB_H - -#include <linux/fb.h> - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H */ diff --git a/include/asm-mn10300/fcntl.h b/include/asm-mn10300/fcntl.h deleted file mode 100644 index 46ab12db5739..000000000000 --- a/include/asm-mn10300/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/fcntl.h> diff --git a/include/asm-mn10300/fpu.h b/include/asm-mn10300/fpu.h deleted file mode 100644 index 64a2b83a7a6a..000000000000 --- a/include/asm-mn10300/fpu.h +++ /dev/null @@ -1,85 +0,0 @@ -/* MN10300 FPU definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_FPU_H -#define _ASM_FPU_H - -#include <asm/processor.h> -#include <asm/sigcontext.h> -#include <asm/user.h> - -#ifdef __KERNEL__ - -/* the task that owns the FPU state */ -extern struct task_struct *fpu_state_owner; - -#define set_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \ -} while (0) - -#define clear_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \ -} while (0) - -#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) - -#define unlazy_fpu(tsk) \ -do { \ - preempt_disable(); \ - if (fpu_state_owner == (tsk)) \ - fpu_save(&tsk->thread.fpu_state); \ - preempt_enable(); \ -} while (0) - -#define exit_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) \ - fpu_state_owner = NULL; \ - preempt_enable(); \ -} while (0) - -#define flush_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) { \ - fpu_state_owner = NULL; \ - __tsk->thread.uregs->epsw &= ~EPSW_FE; \ - } \ - preempt_enable(); \ - clear_using_fpu(__tsk); \ -} while (0) - -extern asmlinkage void fpu_init_state(void); -extern asmlinkage void fpu_kill_state(struct task_struct *); -extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code); -extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); - -#ifdef CONFIG_FPU -extern asmlinkage void fpu_save(struct fpu_state_struct *); -extern asmlinkage void fpu_restore(struct fpu_state_struct *); -#else -#define fpu_save(a) -#define fpu_restore(a) -#endif /* CONFIG_FPU */ - -/* - * signal frame handlers - */ -extern int fpu_setup_sigcontext(struct fpucontext *buf); -extern int fpu_restore_sigcontext(struct fpucontext *buf); - -#endif /* __KERNEL__ */ -#endif /* _ASM_FPU_H */ diff --git a/include/asm-mn10300/frame.inc b/include/asm-mn10300/frame.inc deleted file mode 100644 index 5b1949bdf039..000000000000 --- a/include/asm-mn10300/frame.inc +++ /dev/null @@ -1,91 +0,0 @@ -/* MN10300 Microcontroller core system register definitions -*- asm -*- - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_FRAME_INC -#define _ASM_FRAME_INC - -#ifndef __ASSEMBLY__ -#error not for use in C files -#endif - -#ifndef __ASM_OFFSETS_H__ -#include <asm/asm-offsets.h> -#endif - -#define pi break - -#define fp a3 - -############################################################################### -# -# build a stack frame from the registers -# - the caller has subtracted 4 from SP before coming here -# -############################################################################### -.macro SAVE_ALL - add -4,sp # next exception frame ptr save area - movm [other],(sp) - mov usp,a1 - mov a1,(sp) # USP in MOVM[other] dummy slot - movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) - mov sp,fp # FRAME pointer in A3 - add -12,sp # allow for calls to be made - mov (__frame),a1 - mov a1,(REG_NEXT,fp) - mov fp,(__frame) - - and ~EPSW_FE,epsw # disable the FPU inside the kernel - - # we may be holding current in E2 -#ifdef CONFIG_MN10300_CURRENT_IN_E2 - mov (__current),e2 -#endif -.endm - -############################################################################### -# -# restore the registers from a stack frame -# -############################################################################### -.macro RESTORE_ALL - # peel back the stack to the calling frame - # - this permits execve() to discard extra frames due to kernel syscalls - mov (__frame),fp - mov fp,sp - mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 - mov d0,(__frame) - -#ifndef CONFIG_MN10300_USING_JTAG - mov (REG_EPSW,fp),d0 - btst EPSW_T,d0 - beq 99f - - or EPSW_NMID,epsw - movhu (DCR),d1 - or 0x0001, d1 - movhu d1,(DCR) - -99: -#endif - movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother] - - # must restore usp even if returning to kernel space, - # when CONFIG_PREEMPT is enabled. - mov (sp),a1 # USP in MOVM[other] dummy slot - mov a1,usp - - movm (sp),[other] - add 8,sp - rti - -.endm - - -#endif /* _ASM_FRAME_INC */ diff --git a/include/asm-mn10300/ftrace.h b/include/asm-mn10300/ftrace.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/include/asm-mn10300/ftrace.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-mn10300/futex.h b/include/asm-mn10300/futex.h deleted file mode 100644 index 0b745828f42b..000000000000 --- a/include/asm-mn10300/futex.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/futex.h> diff --git a/include/asm-mn10300/gdb-stub.h b/include/asm-mn10300/gdb-stub.h deleted file mode 100644 index e5a6368559af..000000000000 --- a/include/asm-mn10300/gdb-stub.h +++ /dev/null @@ -1,183 +0,0 @@ -/* MN10300 Kernel GDB stub definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_GDB_STUB_H -#define _ASM_GDB_STUB_H - -#include <asm/exceptions.h> - -/* - * register ID numbers in GDB remote protocol - */ - -#define GDB_REGID_PC 9 -#define GDB_REGID_FP 7 -#define GDB_REGID_SP 8 - -/* - * virtual stack layout for the GDB exception handler - */ -#define NUMREGS 64 - -#define GDB_FR_D0 (0 * 4) -#define GDB_FR_D1 (1 * 4) -#define GDB_FR_D2 (2 * 4) -#define GDB_FR_D3 (3 * 4) -#define GDB_FR_A0 (4 * 4) -#define GDB_FR_A1 (5 * 4) -#define GDB_FR_A2 (6 * 4) -#define GDB_FR_A3 (7 * 4) - -#define GDB_FR_SP (8 * 4) -#define GDB_FR_PC (9 * 4) -#define GDB_FR_MDR (10 * 4) -#define GDB_FR_EPSW (11 * 4) -#define GDB_FR_LIR (12 * 4) -#define GDB_FR_LAR (13 * 4) -#define GDB_FR_MDRQ (14 * 4) - -#define GDB_FR_E0 (15 * 4) -#define GDB_FR_E1 (16 * 4) -#define GDB_FR_E2 (17 * 4) -#define GDB_FR_E3 (18 * 4) -#define GDB_FR_E4 (19 * 4) -#define GDB_FR_E5 (20 * 4) -#define GDB_FR_E6 (21 * 4) -#define GDB_FR_E7 (22 * 4) - -#define GDB_FR_SSP (23 * 4) -#define GDB_FR_MSP (24 * 4) -#define GDB_FR_USP (25 * 4) -#define GDB_FR_MCRH (26 * 4) -#define GDB_FR_MCRL (27 * 4) -#define GDB_FR_MCVF (28 * 4) - -#define GDB_FR_FPCR (29 * 4) -#define GDB_FR_DUMMY0 (30 * 4) -#define GDB_FR_DUMMY1 (31 * 4) - -#define GDB_FR_FS0 (32 * 4) - -#define GDB_FR_SIZE (NUMREGS * 4) - -#ifndef __ASSEMBLY__ - -/* - * This is the same as above, but for the high-level - * part of the GDB stub. - */ - -struct gdb_regs { - /* saved main processor registers */ - u32 d0, d1, d2, d3, a0, a1, a2, a3; - u32 sp, pc, mdr, epsw, lir, lar, mdrq; - u32 e0, e1, e2, e3, e4, e5, e6, e7; - u32 ssp, msp, usp, mcrh, mcrl, mcvf; - - /* saved floating point registers */ - u32 fpcr, _dummy0, _dummy1; - u32 fs0, fs1, fs2, fs3, fs4, fs5, fs6, fs7; - u32 fs8, fs9, fs10, fs11, fs12, fs13, fs14, fs15; - u32 fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23; - u32 fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31; -}; - -/* - * Prototypes - */ -extern void show_registers_only(struct pt_regs *regs); - -extern asmlinkage void gdbstub_init(void); -extern asmlinkage void gdbstub_exit(int status); -extern asmlinkage void gdbstub_io_init(void); -extern asmlinkage void gdbstub_io_set_baud(unsigned baud); -extern asmlinkage int gdbstub_io_rx_char(unsigned char *_ch, int nonblock); -extern asmlinkage void gdbstub_io_tx_char(unsigned char ch); -extern asmlinkage void gdbstub_io_tx_flush(void); - -extern asmlinkage void gdbstub_io_rx_handler(void); -extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code); -extern asmlinkage int gdbstub_intercept(struct pt_regs *, enum exception_code); -extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code); -extern asmlinkage void __gdbstub_bug_trap(void); -extern asmlinkage void __gdbstub_pause(void); -extern asmlinkage void start_kernel(void); - -#ifndef CONFIG_MN10300_CACHE_DISABLED -extern asmlinkage void gdbstub_purge_cache(void); -#else -#define gdbstub_purge_cache() do {} while (0) -#endif - -/* Used to prevent crashes in memory access */ -extern asmlinkage int gdbstub_read_byte(const u8 *, u8 *); -extern asmlinkage int gdbstub_read_word(const u8 *, u8 *); -extern asmlinkage int gdbstub_read_dword(const u8 *, u8 *); -extern asmlinkage int gdbstub_write_byte(u32, u8 *); -extern asmlinkage int gdbstub_write_word(u32, u8 *); -extern asmlinkage int gdbstub_write_dword(u32, u8 *); - -extern asmlinkage void gdbstub_read_byte_guard(void); -extern asmlinkage void gdbstub_read_byte_cont(void); -extern asmlinkage void gdbstub_read_word_guard(void); -extern asmlinkage void gdbstub_read_word_cont(void); -extern asmlinkage void gdbstub_read_dword_guard(void); -extern asmlinkage void gdbstub_read_dword_cont(void); -extern asmlinkage void gdbstub_write_byte_guard(void); -extern asmlinkage void gdbstub_write_byte_cont(void); -extern asmlinkage void gdbstub_write_word_guard(void); -extern asmlinkage void gdbstub_write_word_cont(void); -extern asmlinkage void gdbstub_write_dword_guard(void); -extern asmlinkage void gdbstub_write_dword_cont(void); - -extern u8 gdbstub_rx_buffer[PAGE_SIZE]; -extern u32 gdbstub_rx_inp; -extern u32 gdbstub_rx_outp; -extern u8 gdbstub_rx_overflow; -extern u8 gdbstub_busy; -extern u8 gdbstub_rx_unget; - -#ifdef CONFIG_GDBSTUB_DEBUGGING -extern void gdbstub_printk(const char *fmt, ...) - __attribute__((format(printf, 1, 2))); -#else -static inline __attribute__((format(printf, 1, 2))) -void gdbstub_printk(const char *fmt, ...) -{ -} -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY -#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_entry(FMT, ...) ({ 0; }) -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL -#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_proto(FMT, ...) ({ 0; }) -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_IO -#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_io(FMT, ...) ({ 0; }) -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT -#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_bkpt(FMT, ...) ({ 0; }) -#endif - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_GDB_STUB_H */ diff --git a/include/asm-mn10300/hardirq.h b/include/asm-mn10300/hardirq.h deleted file mode 100644 index 54d950117674..000000000000 --- a/include/asm-mn10300/hardirq.h +++ /dev/null @@ -1,48 +0,0 @@ -/* MN10300 Hardware IRQ statistics and management - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_HARDIRQ_H -#define _ASM_HARDIRQ_H - -#include <linux/threads.h> -#include <linux/irq.h> -#include <asm/exceptions.h> - -/* assembly code in softirq.h is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; - unsigned long idle_timestamp; - unsigned int __nmi_count; /* arch dependent */ - unsigned int __irq_count; /* arch dependent */ -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -extern void ack_bad_irq(int irq); - -/* - * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table - * - these should jump to __common_exception in entry.S unless there's a good - * reason to do otherwise (see trap_preinit() in traps.c) - */ -typedef void (*intr_stub_fnx)(struct pt_regs *regs, - enum exception_code intcode); - -/* - * manipulate pointers in the Exception table (see entry.S) - * - these are indexed by decoding the lower 24 bits of the TBR register - * - note that the MN103E010 doesn't always trap through the correct vector, - * but does always set the TBR correctly - */ -extern asmlinkage void set_excp_vector(enum exception_code code, - intr_stub_fnx handler); - -#endif /* _ASM_HARDIRQ_H */ diff --git a/include/asm-mn10300/highmem.h b/include/asm-mn10300/highmem.h deleted file mode 100644 index 90f2abb04bfd..000000000000 --- a/include/asm-mn10300/highmem.h +++ /dev/null @@ -1,116 +0,0 @@ -/* MN10300 Virtual kernel memory mappings for high memory - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-i386/highmem.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/highmem.h> -#include <asm/kmap_types.h> -#include <asm/pgtable.h> - -/* undef for production */ -#undef HIGHMEM_DEBUG - -/* declarations for highmem.c */ -extern unsigned long highstart_pfn, highend_pfn; - -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; -extern pte_t *pkmap_page_table; - -extern void __init kmap_init(void); - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - */ -#define PKMAP_BASE 0xfe000000UL -#define LAST_PKMAP 1024 -#define LAST_PKMAP_MASK (LAST_PKMAP - 1) -#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -extern unsigned long kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -static inline unsigned long kmap(struct page *page) -{ - if (in_interrupt()) - BUG(); - if (page < highmem_start_page) - return page_address(page); - return kmap_high(page); -} - -static inline void kunmap(struct page *page) -{ - if (in_interrupt()) - BUG(); - if (page < highmem_start_page) - return; - kunmap_high(page); -} - -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -static inline unsigned long kmap_atomic(struct page *page, enum km_type type) -{ - enum fixed_addresses idx; - unsigned long vaddr; - - if (page < highmem_start_page) - return page_address(page); - - debug_kmap_atomic(type); - idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); -#if HIGHMEM_DEBUG - if (!pte_none(*(kmap_pte - idx))) - BUG(); -#endif - set_pte(kmap_pte - idx, mk_pte(page, kmap_prot)); - __flush_tlb_one(vaddr); - - return vaddr; -} - -static inline void kunmap_atomic(unsigned long vaddr, enum km_type type) -{ -#if HIGHMEM_DEBUG - enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id(); - - if (vaddr < FIXADDR_START) /* FIXME */ - return; - - if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)) - BUG(); - - /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it - */ - pte_clear(kmap_pte - idx); - __flush_tlb_one(vaddr); -#endif -} - -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-mn10300/hw_irq.h b/include/asm-mn10300/hw_irq.h deleted file mode 100644 index 70619901098e..000000000000 --- a/include/asm-mn10300/hw_irq.h +++ /dev/null @@ -1,14 +0,0 @@ -/* MN10300 Hardware interrupt definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -#endif /* _ASM_HW_IRQ_H */ diff --git a/include/asm-mn10300/intctl-regs.h b/include/asm-mn10300/intctl-regs.h deleted file mode 100644 index ba544c796c5a..000000000000 --- a/include/asm-mn10300/intctl-regs.h +++ /dev/null @@ -1,73 +0,0 @@ -/* MN10300 On-board interrupt controller registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_INTCTL_REGS_H -#define _ASM_INTCTL_REGS_H - -#include <asm/cpu-regs.h> - -#ifdef __KERNEL__ - -/* interrupt controller registers */ -#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */ - -#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */ -#define IAGR_GN 0x00fc /* group number register - * (documentation _has_ to be wrong) - */ - -#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */ -#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3) - -#define SET_XIRQ_TRIGGER(X,Y) \ -do { \ - u16 x = EXTMD; \ - x &= ~(3 << ((X) * 2)); \ - x |= ((Y) & 3) << ((X) * 2); \ - EXTMD = x; \ -} while (0) - -#define XIRQ_TRIGGER_LOWLEVEL 0 -#define XIRQ_TRIGGER_HILEVEL 1 -#define XIRQ_TRIGGER_NEGEDGE 2 -#define XIRQ_TRIGGER_POSEDGE 3 - -/* non-maskable interrupt control */ -#define NMIIRQ 0 -#define NMICR GxICR(NMIIRQ) /* NMI control register */ -#define NMICR_NMIF 0x0001 /* NMI pin interrupt flag */ -#define NMICR_WDIF 0x0002 /* watchdog timer overflow flag */ -#define NMICR_ABUSERR 0x0008 /* async bus error flag */ - -/* maskable interrupt control */ -#define GxICR_DETECT 0x0001 /* interrupt detect flag */ -#define GxICR_REQUEST 0x0010 /* interrupt request flag */ -#define GxICR_ENABLE 0x0100 /* interrupt enable flag */ -#define GxICR_LEVEL 0x7000 /* interrupt priority level */ -#define GxICR_LEVEL_0 0x0000 /* - level 0 */ -#define GxICR_LEVEL_1 0x1000 /* - level 1 */ -#define GxICR_LEVEL_2 0x2000 /* - level 2 */ -#define GxICR_LEVEL_3 0x3000 /* - level 3 */ -#define GxICR_LEVEL_4 0x4000 /* - level 4 */ -#define GxICR_LEVEL_5 0x5000 /* - level 5 */ -#define GxICR_LEVEL_6 0x6000 /* - level 6 */ -#define GxICR_LEVEL_SHIFT 12 - -#ifndef __ASSEMBLY__ -extern void set_intr_level(int irq, u16 level); -extern void set_intr_postackable(int irq); -#endif - -/* external interrupts */ -#define XIRQxICR(X) GxICR((X)) /* external interrupt control regs */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_INTCTL_REGS_H */ diff --git a/include/asm-mn10300/io.h b/include/asm-mn10300/io.h deleted file mode 100644 index c1a4119e6497..000000000000 --- a/include/asm-mn10300/io.h +++ /dev/null @@ -1,301 +0,0 @@ -/* MN10300 I/O port emulation and memory-mapped I/O - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_IO_H -#define _ASM_IO_H - -#include <asm/page.h> /* I/O is all done through memory accesses */ -#include <asm/cpu-regs.h> -#include <asm/cacheflush.h> - -#define mmiowb() do {} while (0) - -/*****************************************************************************/ -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. - */ -static inline u8 readb(const volatile void __iomem *addr) -{ - return *(const volatile u8 *) addr; -} - -static inline u16 readw(const volatile void __iomem *addr) -{ - return *(const volatile u16 *) addr; -} - -static inline u32 readl(const volatile void __iomem *addr) -{ - return *(const volatile u32 *) addr; -} - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl - -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - -static inline void writeb(u8 b, volatile void __iomem *addr) -{ - *(volatile u8 *) addr = b; -} - -static inline void writew(u16 b, volatile void __iomem *addr) -{ - *(volatile u16 *) addr = b; -} - -static inline void writel(u32 b, volatile void __iomem *addr) -{ - *(volatile u32 *) addr = b; -} - -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -/*****************************************************************************/ -/* - * traditional input/output functions - */ -static inline u8 inb_local(unsigned long addr) -{ - return readb((volatile void __iomem *) addr); -} - -static inline void outb_local(u8 b, unsigned long addr) -{ - return writeb(b, (volatile void __iomem *) addr); -} - -static inline u8 inb(unsigned long addr) -{ - return readb((volatile void __iomem *) addr); -} - -static inline u16 inw(unsigned long addr) -{ - return readw((volatile void __iomem *) addr); -} - -static inline u32 inl(unsigned long addr) -{ - return readl((volatile void __iomem *) addr); -} - -static inline void outb(u8 b, unsigned long addr) -{ - return writeb(b, (volatile void __iomem *) addr); -} - -static inline void outw(u16 b, unsigned long addr) -{ - return writew(b, (volatile void __iomem *) addr); -} - -static inline void outl(u32 b, unsigned long addr) -{ - return writel(b, (volatile void __iomem *) addr); -} - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x, addr) outb((x), (addr)) -#define outw_p(x, addr) outw((x), (addr)) -#define outl_p(x, addr) outl((x), (addr)) - -static inline void insb(unsigned long addr, void *buffer, int count) -{ - if (count) { - u8 *buf = buffer; - do { - u8 x = inb(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void insw(unsigned long addr, void *buffer, int count) -{ - if (count) { - u16 *buf = buffer; - do { - u16 x = inw(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void insl(unsigned long addr, void *buffer, int count) -{ - if (count) { - u32 *buf = buffer; - do { - u32 x = inl(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void outsb(unsigned long addr, const void *buffer, int count) -{ - if (count) { - const u8 *buf = buffer; - do { - outb(*buf++, addr); - } while (--count); - } -} - -static inline void outsw(unsigned long addr, const void *buffer, int count) -{ - if (count) { - const u16 *buf = buffer; - do { - outw(*buf++, addr); - } while (--count); - } -} - -extern void __outsl(unsigned long addr, const void *buffer, int count); -static inline void outsl(unsigned long addr, const void *buffer, int count) -{ - if ((unsigned long) buffer & 0x3) - return __outsl(addr, buffer, count); - - if (count) { - const u32 *buf = buffer; - do { - outl(*buf++, addr); - } while (--count); - } -} - -#define ioread8(addr) readb(addr) -#define ioread16(addr) readw(addr) -#define ioread32(addr) readl(addr) - -#define iowrite8(v, addr) writeb((v), (addr)) -#define iowrite16(v, addr) writew((v), (addr)) -#define iowrite32(v, addr) writel((v), (addr)) - -#define ioread8_rep(p, dst, count) \ - insb((unsigned long) (p), (dst), (count)) -#define ioread16_rep(p, dst, count) \ - insw((unsigned long) (p), (dst), (count)) -#define ioread32_rep(p, dst, count) \ - insl((unsigned long) (p), (dst), (count)) - -#define iowrite8_rep(p, src, count) \ - outsb((unsigned long) (p), (src), (count)) -#define iowrite16_rep(p, src, count) \ - outsw((unsigned long) (p), (src), (count)) -#define iowrite32_rep(p, src, count) \ - outsl((unsigned long) (p), (src), (count)) - - -#define IO_SPACE_LIMIT 0xffffffff - -#ifdef __KERNEL__ - -#include <linux/vmalloc.h> -#define __io_virt(x) ((void *) (x)) - -/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ -struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) -{ -} - -/* - * Change virtual addresses to physical addresses and vv. - * These are pretty trivial - */ -static inline unsigned long virt_to_phys(volatile void *address) -{ - return __pa(address); -} - -static inline void *phys_to_virt(unsigned long address) -{ - return __va(address); -} - -/* - * Change "struct page" to physical address. - */ -static inline void *__ioremap(unsigned long offset, unsigned long size, - unsigned long flags) -{ - return (void *) offset; -} - -static inline void *ioremap(unsigned long offset, unsigned long size) -{ - return (void *) offset; -} - -/* - * This one maps high address device memory and turns off caching for that - * area. it's useful if some control registers are in such an area and write - * combining or read caching is not desirable: - */ -static inline void *ioremap_nocache(unsigned long offset, unsigned long size) -{ - return (void *) (offset | 0x20000000); -} - -#define ioremap_wc ioremap_nocache - -static inline void iounmap(void *addr) -{ -} - -static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - return (void __iomem *) port; -} - -static inline void ioport_unmap(void __iomem *p) -{ -} - -#define xlate_dev_kmem_ptr(p) ((void *) (p)) -#define xlate_dev_mem_ptr(p) ((void *) (p)) - -/* - * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff - */ -static inline unsigned long virt_to_bus(volatile void *address) -{ - return ((unsigned long) address) & ~0x20000000; -} - -static inline void *bus_to_virt(unsigned long address) -{ - return (void *) address; -} - -#define page_to_bus page_to_phys - -#define memset_io(a, b, c) memset(__io_virt(a), (b), (c)) -#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c)) -#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c)) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IO_H */ diff --git a/include/asm-mn10300/ioctl.h b/include/asm-mn10300/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/include/asm-mn10300/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/include/asm-mn10300/ioctls.h b/include/asm-mn10300/ioctls.h deleted file mode 100644 index dcbfb452974f..000000000000 --- a/include/asm-mn10300/ioctls.h +++ /dev/null @@ -1,88 +0,0 @@ -#ifndef _ASM_IOCTLS_H -#define _ASM_IOCTLS_H - -#include <asm/ioctl.h> - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 0x2A, struct termios2) -#define TCSETS2 _IOW('T', 0x2B, struct termios2) -#define TCSETSW2 _IOW('T', 0x2C, struct termios2) -#define TCSETSF2 _IOW('T', 0x2D, struct termios2) -#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number - * (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ -#define FIOQSIZE 0x5460 - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* _ASM_IOCTLS_H */ diff --git a/include/asm-mn10300/ipc.h b/include/asm-mn10300/ipc.h deleted file mode 100644 index a46e3d9c2a3f..000000000000 --- a/include/asm-mn10300/ipc.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ipc.h> diff --git a/include/asm-mn10300/ipcbuf.h b/include/asm-mn10300/ipcbuf.h deleted file mode 100644 index f6f63d448272..000000000000 --- a/include/asm-mn10300/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASM_IPCBUF_H -#define _ASM_IPCBUF_H - -/* - * The ipc64_perm structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_IPCBUF_H */ diff --git a/include/asm-mn10300/irq.h b/include/asm-mn10300/irq.h deleted file mode 100644 index 53b380116901..000000000000 --- a/include/asm-mn10300/irq.h +++ /dev/null @@ -1,32 +0,0 @@ -/* MN10300 Hardware interrupt definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - Derived from include/asm-i386/irq.h: - * - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -#include <asm/intctl-regs.h> -#include <asm/reset-regs.h> -#include <asm/proc/irq.h> - -/* this number is used when no interrupt has been assigned */ -#define NO_IRQ INT_MAX - -/* hardware irq numbers */ -#define NR_IRQS GxICR_NUM_IRQS - -/* external hardware irq numbers */ -#define NR_XIRQS GxICR_NUM_XIRQS - -#define irq_canonicalize(IRQ) (IRQ) - -#endif /* _ASM_IRQ_H */ diff --git a/include/asm-mn10300/irq_regs.h b/include/asm-mn10300/irq_regs.h deleted file mode 100644 index a848cd232eb4..000000000000 --- a/include/asm-mn10300/irq_regs.h +++ /dev/null @@ -1,24 +0,0 @@ -/* MN10300 IRQ registers pointer definition - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_IRQ_REGS_H -#define _ASM_IRQ_REGS_H - -/* - * Per-cpu current frame pointer - the location of the last exception frame on - * the stack - */ -#define ARCH_HAS_OWN_IRQ_REGS - -#ifndef __ASSEMBLY__ -#define get_irq_regs() (__frame) -#endif - -#endif /* _ASM_IRQ_REGS_H */ diff --git a/include/asm-mn10300/kdebug.h b/include/asm-mn10300/kdebug.h deleted file mode 100644 index 0f47e112190c..000000000000 --- a/include/asm-mn10300/kdebug.h +++ /dev/null @@ -1,22 +0,0 @@ -/* MN10300 In-kernel death knells - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_KDEBUG_H -#define _ASM_KDEBUG_H - -/* Grossly misnamed. */ -enum die_val { - DIE_OOPS = 1, - DIE_BREAKPOINT, - DIE_GPF, -}; - -#endif /* _ASM_KDEBUG_H */ diff --git a/include/asm-mn10300/kmap_types.h b/include/asm-mn10300/kmap_types.h deleted file mode 100644 index 3398f9f35603..000000000000 --- a/include/asm-mn10300/kmap_types.h +++ /dev/null @@ -1,31 +0,0 @@ -/* MN10300 kmap_atomic() slot IDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif /* _ASM_KMAP_TYPES_H */ diff --git a/include/asm-mn10300/kprobes.h b/include/asm-mn10300/kprobes.h deleted file mode 100644 index c800b590183a..000000000000 --- a/include/asm-mn10300/kprobes.h +++ /dev/null @@ -1,50 +0,0 @@ -/* MN10300 Kernel Probes support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public Licence as published by - * the Free Software Foundation; either version 2 of the Licence, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public Licence for more details. - * - * You should have received a copy of the GNU General Public Licence - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ -#ifndef _ASM_KPROBES_H -#define _ASM_KPROBES_H - -#include <linux/types.h> -#include <linux/ptrace.h> - -struct kprobe; - -typedef unsigned char kprobe_opcode_t; -#define BREAKPOINT_INSTRUCTION 0xff -#define MAX_INSN_SIZE 8 -#define MAX_STACK_SIZE 128 - -/* Architecture specific copy of original instruction */ -struct arch_specific_insn { - /* copy of original instruction - */ - kprobe_opcode_t insn[MAX_INSN_SIZE]; -}; - -extern const int kretprobe_blacklist_size; - -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); - -#define flush_insn_slot(p) do {} while (0) - -extern void arch_remove_kprobe(struct kprobe *p); - -#endif /* _ASM_KPROBES_H */ diff --git a/include/asm-mn10300/linkage.h b/include/asm-mn10300/linkage.h deleted file mode 100644 index dda3002a5dfa..000000000000 --- a/include/asm-mn10300/linkage.h +++ /dev/null @@ -1,20 +0,0 @@ -/* MN10300 Linkage and calling-convention overrides - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_LINKAGE_H -#define _ASM_LINKAGE_H - -/* don't override anything */ -#define asmlinkage - -#define __ALIGN .align 4,0xcb -#define __ALIGN_STR ".align 4,0xcb" - -#endif diff --git a/include/asm-mn10300/local.h b/include/asm-mn10300/local.h deleted file mode 100644 index c11c530f74d0..000000000000 --- a/include/asm-mn10300/local.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local.h> diff --git a/include/asm-mn10300/mc146818rtc.h b/include/asm-mn10300/mc146818rtc.h deleted file mode 100644 index df6bc6e0e8c6..000000000000 --- a/include/asm-mn10300/mc146818rtc.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm/rtc-regs.h> diff --git a/include/asm-mn10300/mman.h b/include/asm-mn10300/mman.h deleted file mode 100644 index b7986b65addf..000000000000 --- a/include/asm-mn10300/mman.h +++ /dev/null @@ -1,28 +0,0 @@ -/* MN10300 Constants for mmap and co. - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - Derived from asm-x86/mman.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_MMAN_H -#define _ASM_MMAN_H - -#include <asm-generic/mman.h> - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* _ASM_MMAN_H */ diff --git a/include/asm-mn10300/mmu.h b/include/asm-mn10300/mmu.h deleted file mode 100644 index 2d2d097e7309..000000000000 --- a/include/asm-mn10300/mmu.h +++ /dev/null @@ -1,19 +0,0 @@ -/* MN10300 Memory management context - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-frv/mmu.h - */ - -#ifndef _ASM_MMU_H -#define _ASM_MMU_H - -/* - * MMU context - */ -typedef struct { - unsigned long tlbpid[NR_CPUS]; /* TLB PID for this process on - * each CPU */ -} mm_context_t; - -#endif /* _ASM_MMU_H */ diff --git a/include/asm-mn10300/mmu_context.h b/include/asm-mn10300/mmu_context.h deleted file mode 100644 index a9e2e34f69b0..000000000000 --- a/include/asm-mn10300/mmu_context.h +++ /dev/null @@ -1,138 +0,0 @@ -/* MN10300 MMU context management - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - Derived from include/asm-m32r/mmu_context.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * - * This implements an algorithm to provide TLB PID mappings to provide - * selective access to the TLB for processes, thus reducing the number of TLB - * flushes required. - * - * Note, however, that the M32R algorithm is technically broken as it does not - * handle version wrap-around, and could, theoretically, have a problem with a - * very long lived program that sleeps long enough for the version number to - * wrap all the way around so that its TLB mappings appear valid once again. - */ -#ifndef _ASM_MMU_CONTEXT_H -#define _ASM_MMU_CONTEXT_H - -#include <asm/atomic.h> -#include <asm/pgalloc.h> -#include <asm/tlbflush.h> -#include <asm-generic/mm_hooks.h> - -#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL -#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL -#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL -#define MMU_NO_CONTEXT 0x00000000UL - -extern unsigned long mmu_context_cache[NR_CPUS]; -#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) - -#define enter_lazy_tlb(mm, tsk) do {} while (0) - -#ifdef CONFIG_SMP -#define cpu_ran_vm(cpu, task) \ - cpu_set((cpu), (task)->cpu_vm_mask) -#define cpu_maybe_ran_vm(cpu, task) \ - cpu_test_and_set((cpu), (task)->cpu_vm_mask) -#else -#define cpu_ran_vm(cpu, task) do {} while (0) -#define cpu_maybe_ran_vm(cpu, task) true -#endif /* CONFIG_SMP */ - -/* - * allocate an MMU context - */ -static inline unsigned long allocate_mmu_context(struct mm_struct *mm) -{ - unsigned long *pmc = &mmu_context_cache[smp_processor_id()]; - unsigned long mc = ++(*pmc); - - if (!(mc & MMU_CONTEXT_TLBPID_MASK)) { - /* we exhausted the TLB PIDs of this version on this CPU, so we - * flush this CPU's TLB in its entirety and start new cycle */ - flush_tlb_all(); - - /* fix the TLB version if needed (we avoid version #0 so as to - * distingush MMU_NO_CONTEXT) */ - if (!mc) - *pmc = mc = MMU_CONTEXT_FIRST_VERSION; - } - mm_context(mm) = mc; - return mc; -} - -/* - * get an MMU context if one is needed - */ -static inline unsigned long get_mmu_context(struct mm_struct *mm) -{ - unsigned long mc = MMU_NO_CONTEXT, cache; - - if (mm) { - cache = mmu_context_cache[smp_processor_id()]; - mc = mm_context(mm); - - /* if we have an old version of the context, replace it */ - if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK) - mc = allocate_mmu_context(mm); - } - return mc; -} - -/* - * initialise the context related info for a new mm_struct instance - */ -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - int num_cpus = NR_CPUS, i; - - for (i = 0; i < num_cpus; i++) - mm->context.tlbpid[i] = MMU_NO_CONTEXT; - return 0; -} - -/* - * destroy context related info for an mm_struct that is about to be put to - * rest - */ -#define destroy_context(mm) do { } while (0) - -/* - * after we have set current->mm to a new value, this activates the context for - * the new mm so we see the new mappings. - */ -static inline void activate_context(struct mm_struct *mm, int cpu) -{ - PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK; -} - -/* - * change between virtual memory sets - */ -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - int cpu = smp_processor_id(); - - if (prev != next) { - cpu_ran_vm(cpu, next); - activate_context(next, cpu); - PTBR = (unsigned long) next->pgd; - } else if (!cpu_maybe_ran_vm(cpu, next)) { - activate_context(next, cpu); - } -} - -#define deactivate_mm(tsk, mm) do {} while (0) -#define activate_mm(prev, next) switch_mm((prev), (next), NULL) - -#endif /* _ASM_MMU_CONTEXT_H */ diff --git a/include/asm-mn10300/module.h b/include/asm-mn10300/module.h deleted file mode 100644 index 5d7057d01494..000000000000 --- a/include/asm-mn10300/module.h +++ /dev/null @@ -1,27 +0,0 @@ -/* MN10300 Arch-specific module definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * Derived from include/asm-i386/module.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_MODULE_H -#define _ASM_MODULE_H - -struct mod_arch_specific { -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -/* - * Include the MN10300 architecture version. - */ -#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " " - -#endif /* _ASM_MODULE_H */ diff --git a/include/asm-mn10300/msgbuf.h b/include/asm-mn10300/msgbuf.h deleted file mode 100644 index 8b602450cc4a..000000000000 --- a/include/asm-mn10300/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASM_MSGBUF_H -#define _ASM_MSGBUF_H - -/* - * The msqid64_ds structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_MSGBUF_H */ diff --git a/include/asm-mn10300/mutex.h b/include/asm-mn10300/mutex.h deleted file mode 100644 index 84f5490c6fb4..000000000000 --- a/include/asm-mn10300/mutex.h +++ /dev/null @@ -1,16 +0,0 @@ -/* MN10300 Mutex fastpath - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ -#include <asm-generic/mutex-null.h> diff --git a/include/asm-mn10300/nmi.h b/include/asm-mn10300/nmi.h deleted file mode 100644 index f3671cbbc117..000000000000 --- a/include/asm-mn10300/nmi.h +++ /dev/null @@ -1,14 +0,0 @@ -/* MN10300 NMI handling - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_NMI_H -#define _ASM_NMI_H - -#endif /* _ASM_NMI_H */ diff --git a/include/asm-mn10300/page.h b/include/asm-mn10300/page.h deleted file mode 100644 index 8288e124165b..000000000000 --- a/include/asm-mn10300/page.h +++ /dev/null @@ -1,128 +0,0 @@ -/* MN10300 Page table definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PAGE_H -#define _ASM_PAGE_H - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 - -#ifndef __ASSEMBLY__ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE - 1)) -#else -#define PAGE_SIZE +(1 << PAGE_SHIFT) /* unary plus marks an - * immediate val not an addr */ -#define PAGE_MASK +(~(PAGE_SIZE - 1)) -#endif - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) -#define copy_page(to, from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) - -#define clear_user_page(addr, vaddr, page) clear_page(addr) -#define copy_user_page(vto, vfrom, vaddr, to) copy_page(vto, vfrom) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define PTE_MASK PAGE_MASK -#define HPAGE_SHIFT 22 - -#ifdef CONFIG_HUGETLB_PAGE -#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE - 1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -#endif - -#define pte_val(x) ((x).pte) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) }) -#define __pgd(x) ((pgd_t) { (x) }) -#define __pgprot(x) ((pgprot_t) { (x) }) - -#include <asm-generic/pgtable-nopmd.h> - -#endif /* !__ASSEMBLY__ */ - -/* - * This handles the memory map.. We could make this a config - * option, but too many people screw it up, and too few need - * it. - * - * A __PAGE_OFFSET of 0xC0000000 means that the kernel has - * a virtual address space of one gigabyte, which limits the - * amount of physical memory you can use to about 950MB. - */ - -#ifndef __ASSEMBLY__ - -/* Pure 2^n version of get_order */ -static inline int get_order(unsigned long size) __attribute__((const)); -static inline int get_order(unsigned long size) -{ - int order; - - size = (size - 1) >> (PAGE_SHIFT - 1); - order = -1; - do { - size >>= 1; - order++; - } while (size); - return order; -} - -#endif /* __ASSEMBLY__ */ - -#include <asm/page_offset.h> - -#define __PAGE_OFFSET (PAGE_OFFSET_RAW) -#define PAGE_OFFSET ((unsigned long) __PAGE_OFFSET) - -/* - * main RAM and kernel working space are coincident at 0x90000000, but to make - * life more interesting, there's also an uncached virtual shadow at 0xb0000000 - * - these mappings are fixed in the MMU - */ -#define __pfn_disp (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT) - -#define __pa(x) ((unsigned long)(x)) -#define __va(x) ((void *)(unsigned long)(x)) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) -#define pfn_to_page(pfn) (mem_map + ((pfn) - __pfn_disp)) -#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + __pfn_disp) - -#define pfn_valid(pfn) \ -({ \ - unsigned long __pfn = (pfn) - __pfn_disp; \ - __pfn < max_mapnr; \ -}) - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -#define VM_DATA_DEFAULT_FLAGS \ - (VM_READ | VM_WRITE | \ - ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PAGE_H */ diff --git a/include/asm-mn10300/page_offset.h b/include/asm-mn10300/page_offset.h deleted file mode 100644 index 8eb5b16ad86b..000000000000 --- a/include/asm-mn10300/page_offset.h +++ /dev/null @@ -1,11 +0,0 @@ -/* MN10300 Kernel base address - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - */ -#ifndef _ASM_PAGE_OFFSET_H -#define _ASM_PAGE_OFFSET_H - -#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS - -#endif diff --git a/include/asm-mn10300/param.h b/include/asm-mn10300/param.h deleted file mode 100644 index 789b1df41fcb..000000000000 --- a/include/asm-mn10300/param.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN10300 Kernel parameters - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PARAM_H -#define _ASM_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ /* Internal kernel timer frequency */ -#define USER_HZ 100 /* .. some user interfaces are in - * "ticks" */ -#define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ -#define COMMAND_LINE_SIZE 256 - -#endif /* _ASM_PARAM_H */ diff --git a/include/asm-mn10300/pci.h b/include/asm-mn10300/pci.h deleted file mode 100644 index 0517b45313d8..000000000000 --- a/include/asm-mn10300/pci.h +++ /dev/null @@ -1,129 +0,0 @@ -/* MN10300 PCI definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PCI_H -#define _ASM_PCI_H - -#ifdef __KERNEL__ -#include <linux/mm.h> /* for struct page */ - -#if 0 -#define __pcbdebug(FMT, ADDR, ...) \ - printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \ - (u32)(ADDR), ##__VA_ARGS__) - -#define __pcidebug(FMT, BUS, DEVFN, WHERE,...) \ -do { \ - printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n", \ - (BUS)->number, \ - PCI_SLOT(DEVFN), \ - PCI_FUNC(DEVFN), \ - (u32)(WHERE), ##__VA_ARGS__); \ -} while (0) - -#else -#define __pcbdebug(FMT, ADDR, ...) do {} while (0) -#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0) -#endif - -/* Can be used to override the logic in pci_scan_bus for skipping - * already-configured bus numbers - to be used for buggy BIOSes or - * architectures with incomplete PCI setup by the loader */ - -#ifdef CONFIG_PCI -#define pcibios_assign_all_busses() 1 -extern void unit_pci_init(void); -#else -#define pcibios_assign_all_busses() 0 -#endif - -extern unsigned long pci_mem_start; -#define PCIBIOS_MIN_IO 0xBE000004 -#define PCIBIOS_MIN_MEM 0xB8000000 - -void pcibios_set_master(struct pci_dev *dev); -void pcibios_penalize_isa_irq(int irq); - -/* Dynamic DMA mapping stuff. - * i386 has everything mapped statically. - */ - -#include <linux/types.h> -#include <linux/slab.h> -#include <asm/scatterlist.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <asm/io.h> - -struct pci_dev; - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - - -/* This is always fine. */ -#define pci_dac_dma_supported(pci_dev, mask) (0) - -/* Return the index of the PCI controller for device. */ -static inline int pci_controller_num(struct pci_dev *dev) -{ - return 0; -} - -#define HAVE_PCI_MMAP -extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, - int write_combine); - -#endif /* __KERNEL__ */ - -/* implement the pci_ DMA API in terms of the generic device dma_ one */ -#include <asm-generic/pci-dma-compat.h> - -/** - * pcibios_resource_to_bus - convert resource to PCI bus address - * @dev: device which owns this resource - * @region: converted bus-centric region (start,end) - * @res: resource to convert - * - * Convert a resource to a PCI device bus address or bus window. - */ -extern void pcibios_resource_to_bus(struct pci_dev *dev, - struct pci_bus_region *region, - struct resource *res); - -extern void pcibios_bus_to_resource(struct pci_dev *dev, - struct resource *res, - struct pci_bus_region *region); - -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -#define pcibios_scan_all_fns(a, b) 0 - -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - return channel ? 15 : 14; -} - -#endif /* _ASM_PCI_H */ diff --git a/include/asm-mn10300/percpu.h b/include/asm-mn10300/percpu.h deleted file mode 100644 index 06a959d67234..000000000000 --- a/include/asm-mn10300/percpu.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/percpu.h> diff --git a/include/asm-mn10300/pgalloc.h b/include/asm-mn10300/pgalloc.h deleted file mode 100644 index ec057e1bd4cf..000000000000 --- a/include/asm-mn10300/pgalloc.h +++ /dev/null @@ -1,56 +0,0 @@ -/* MN10300 Page and page table/directory allocation - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PGALLOC_H -#define _ASM_PGALLOC_H - -#include <asm/processor.h> -#include <asm/page.h> -#include <linux/threads.h> -#include <linux/mm.h> /* for struct page */ - -struct mm_struct; -struct page; - -/* attach a page table to a PMD entry */ -#define pmd_populate_kernel(mm, pmd, pte) \ - set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE)) - -static inline -void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte) -{ - set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE)); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * Allocate and free page tables. - */ - -extern pgd_t *pgd_alloc(struct mm_struct *); -extern void pgd_free(struct mm_struct *, pgd_t *); - -extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); -extern struct page *pte_alloc_one(struct mm_struct *, unsigned long); - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long) pte); -} - -static inline void pte_free(struct mm_struct *mm, struct page *pte) -{ - __free_page(pte); -} - - -#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte)) - -#endif /* _ASM_PGALLOC_H */ diff --git a/include/asm-mn10300/pgtable.h b/include/asm-mn10300/pgtable.h deleted file mode 100644 index 6dc30fc827c4..000000000000 --- a/include/asm-mn10300/pgtable.h +++ /dev/null @@ -1,492 +0,0 @@ -/* MN10300 Page table manipulators and constants - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * - * The Linux memory management assumes a three-level page table setup. On - * the i386, we use that, but "fold" the mid level into the top-level page - * table, so that we physically have the same two-level page table as the - * i386 mmu expects. - * - * This file contains the functions and defines necessary to modify and use - * the i386 page table tree for the purposes of the MN10300 TLB handler - * functions. - */ -#ifndef _ASM_PGTABLE_H -#define _ASM_PGTABLE_H - -#include <asm/cpu-regs.h> - -#ifndef __ASSEMBLY__ -#include <asm/processor.h> -#include <asm/cache.h> -#include <linux/threads.h> - -#include <asm/bitops.h> - -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/spinlock.h> - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) -extern unsigned long empty_zero_page[1024]; -extern spinlock_t pgd_lock; -extern struct page *pgd_list; - -extern void pmd_ctor(void *, struct kmem_cache *, unsigned long); -extern void pgtable_cache_init(void); -extern void paging_init(void); - -#endif /* !__ASSEMBLY__ */ - -/* - * The Linux mn10300 paging architecture only implements both the traditional - * 2-level page tables - */ -#define PGDIR_SHIFT 22 -#define PTRS_PER_PGD 1024 -#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */ -#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */ -#define PTRS_PER_PTE 1024 - -#define PGD_SIZE PAGE_SIZE -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE - 1)) - -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS) - -#define TWOLEVEL_PGDIR_SHIFT 22 -#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) -#define BOOT_KERNEL_PGD_PTRS (1024 - BOOT_USER_PGD_PTRS) - -#ifndef __ASSEMBLY__ -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -#endif - -/* - * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM - * area has to be in the lower half of the virtual address range (the upper - * half is not translated through the TLB). - * - * So in this case, the vmalloc area goes at the bottom of the address map - * (leaving a hole at the very bottom to catch addressing errors), and - * userspace starts immediately above. - * - * The vmalloc() routines also leaves a hole of 4kB between each vmalloced - * area to catch addressing errors. - */ -#define VMALLOC_OFFSET (8 * 1024 * 1024) -#define VMALLOC_START (0x70000000) -#define VMALLOC_END (0x7C000000) - -#ifndef __ASSEMBLY__ -extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; -#endif - -/* IPTEL/DPTEL bit assignments */ -#define _PAGE_BIT_VALID xPTEL_V_BIT -#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_CACHE xPTEL_C_BIT -#define _PAGE_BIT_PRESENT xPTEL_PV_BIT -#define _PAGE_BIT_DIRTY xPTEL_D_BIT -#define _PAGE_BIT_GLOBAL xPTEL_G_BIT - -#define _PAGE_VALID xPTEL_V -#define _PAGE_ACCESSED xPTEL_UNUSED1 -#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */ -#define _PAGE_CACHE xPTEL_C -#define _PAGE_PRESENT xPTEL_PV -#define _PAGE_DIRTY xPTEL_D -#define _PAGE_PROT xPTEL_PR -#define _PAGE_PROT_RKNU xPTEL_PR_ROK -#define _PAGE_PROT_WKNU xPTEL_PR_RWK -#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU -#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU -#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU -#define _PAGE_GLOBAL xPTEL_G -#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */ - -#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */ - -#define __PAGE_PROT_UWAUX 0x040 -#define __PAGE_PROT_USER 0x080 -#define __PAGE_PROT_WRITE 0x100 - -#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID) -#define _PAGE_PROTNONE 0x000 /* If not present */ - -#ifndef __ASSEMBLY__ - -#define VMALLOC_VMADDR(x) ((unsigned long)(x)) - -#define _PAGE_TABLE (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -#define __PAGE_NONE (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE) -#define __PAGE_SHARED (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE) -#define __PAGE_COPY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) -#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) - -#define PAGE_NONE __pgprot(__PAGE_NONE | _PAGE_NX) -#define PAGE_SHARED_NOEXEC __pgprot(__PAGE_SHARED | _PAGE_NX) -#define PAGE_COPY_NOEXEC __pgprot(__PAGE_COPY | _PAGE_NX) -#define PAGE_READONLY_NOEXEC __pgprot(__PAGE_READONLY | _PAGE_NX) -#define PAGE_SHARED_EXEC __pgprot(__PAGE_SHARED) -#define PAGE_COPY_EXEC __pgprot(__PAGE_COPY) -#define PAGE_READONLY_EXEC __pgprot(__PAGE_READONLY) -#define PAGE_COPY PAGE_COPY_NOEXEC -#define PAGE_READONLY PAGE_READONLY_NOEXEC -#define PAGE_SHARED PAGE_SHARED_EXEC - -#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL) - -#define __PAGE_KERNEL (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX) -#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX) -#define __PAGE_KERNEL_EXEC (__PAGE_KERNEL & ~_PAGE_NX) -#define __PAGE_KERNEL_RO (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX) -#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE) -#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE) - -#define PAGE_KERNEL __pgprot(__PAGE_KERNEL) -#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO) -#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC) -#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE) -#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE) -#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC) - -/* - * Whilst the MN10300 can do page protection for execute (given separate data - * and insn TLBs), we are not supporting it at the moment. Write permission, - * however, always implies read permission (but not execute permission). - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY_NOEXEC -#define __P010 PAGE_COPY_NOEXEC -#define __P011 PAGE_COPY_NOEXEC -#define __P100 PAGE_READONLY_EXEC -#define __P101 PAGE_READONLY_EXEC -#define __P110 PAGE_COPY_EXEC -#define __P111 PAGE_COPY_EXEC - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY_NOEXEC -#define __S010 PAGE_SHARED_NOEXEC -#define __S011 PAGE_SHARED_NOEXEC -#define __S100 PAGE_READONLY_EXEC -#define __S101 PAGE_READONLY_EXEC -#define __S110 PAGE_SHARED_EXEC -#define __S111 PAGE_SHARED_EXEC - -/* - * Define this to warn about kernel memory accesses that are - * done without a 'verify_area(VERIFY_WRITE,..)' - */ -#undef TEST_VERIFY_AREA - -#define pte_present(x) (pte_val(x) & _PAGE_VALID) -#define pte_clear(mm, addr, xp) \ -do { \ - set_pte_at((mm), (addr), (xp), __pte(0)); \ -} while (0) - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (!pmd_none(x)) -#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) -#define pmd_bad(x) 0 - - -#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) - -#ifndef __ASSEMBLY__ - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_user(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } -static inline int pte_read(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; } -static inline int pte_special(pte_t pte){ return 0; } - -/* - * The following only works if pte_present() is not true. - */ -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } - -static inline pte_t pte_rdprotect(pte_t pte) -{ - pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte; -} -static inline pte_t pte_exprotect(pte_t pte) -{ - pte_val(pte) |= _PAGE_NX; return pte; -} - -static inline pte_t pte_wrprotect(pte_t pte) -{ - pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte; -} - -static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } -static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) &= ~_PAGE_NX; return pte; } - -static inline pte_t pte_mkread(pte_t pte) -{ - pte_val(pte) |= __PAGE_PROT_USER; - if (pte_write(pte)) - pte_val(pte) |= __PAGE_PROT_UWAUX; - return pte; -} -static inline pte_t pte_mkwrite(pte_t pte) -{ - pte_val(pte) |= __PAGE_PROT_WRITE; - if (pte_val(pte) & __PAGE_PROT_USER) - pte_val(pte) |= __PAGE_PROT_UWAUX; - return pte; -} - -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -#define pte_ERROR(e) \ - printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ - __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ - __FILE__, __LINE__, pgd_val(e)) - -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -#define pgd_clear(xp) do { } while (0) - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) (*(pteptr) = pteval) -#define set_pte_at(mm, addr, ptep, pteval) set_pte((ptep), (pteval)) -#define set_pte_atomic(pteptr, pteval) set_pte((pteptr), (pteval)) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -#define ptep_get_and_clear(mm, addr, ptep) \ - __pte(xchg(&(ptep)->pte, 0)) -#define pte_same(a, b) (pte_val(a) == pte_val(b)) -#define pte_page(x) pfn_to_page(pte_pfn(x)) -#define pte_none(x) (!pte_val(x)) -#define pte_pfn(x) ((unsigned long) (pte_val(x) >> PAGE_SHIFT)) -#define __pfn_addr(pfn) ((pfn) << PAGE_SHIFT) -#define pfn_pte(pfn, prot) __pte(__pfn_addr(pfn) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(__pfn_addr(pfn) | pgprot_val(prot)) - -/* - * All present user pages are user-executable: - */ -static inline int pte_exec(pte_t pte) -{ - return pte_user(pte); -} - -/* - * All present pages are kernel-executable: - */ -static inline int pte_exec_kernel(pte_t pte) -{ - return 1; -} - -/* - * Bits 0 and 1 are taken, split up the 29 bits of offset - * into this range: - */ -#define PTE_FILE_MAX_BITS 29 - -#define pte_to_pgoff(pte) (pte_val(pte) >> 2) -#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) - -/* Encode and de-code a swap entry */ -#define __swp_type(x) (((x).val >> 2) & 0x3f) -#define __swp_offset(x) ((x).val >> 8) -#define __swp_entry(type, offset) \ - ((swp_entry_t) { ((type) << 2) | ((offset) << 8) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) __pte((x).val) - -static inline -int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, - pte_t *ptep) -{ - if (!pte_dirty(*ptep)) - return 0; - return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte); -} - -static inline -int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, - pte_t *ptep) -{ - if (!pte_young(*ptep)) - return 0; - return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte); -} - -static inline -void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); -} - -static inline void ptep_mkdirty(pte_t *ptep) -{ - set_bit(_PAGE_BIT_DIRTY, &ptep->pte); -} - -/* - * Macro to mark a page protection value as "uncacheable". On processors which - * do not support it, this is a no-op. - */ -#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE) - - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ - -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) -#define mk_pte_huge(entry) \ - ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) &= _PAGE_CHG_MASK; - pte_val(pte) |= pgprot_val(newprot); - return pte; -} - -#define page_pte(page) page_pte_prot((page), __pgprot(0)) - -#define pmd_page_kernel(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) - -#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) - -#define pmd_large(pmd) \ - ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \ - (_PAGE_PSE | _PAGE_PRESENT)) - -/* - * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD] - * - * this macro returns the index of the entry in the pgd page which would - * control the given virtual address - */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) - -/* - * pgd_offset() returns a (pgd_t *) - * pgd_index() is used get the offset into the pgd page's array of pgd_t's; - */ -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* - * a shortcut which implies the use of the kernel's pgd, instead - * of a process's - */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD] - * - * this macro returns the index of the entry in the pmd page which would - * control the given virtual address - */ -#define pmd_index(address) \ - (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) - -/* - * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] - * - * this macro returns the index of the entry in the pte page which would - * control the given virtual address - */ -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address)) - -/* - * Make a given kernel text page executable/non-executable. - * Returns the previous executability setting of that page (which - * is used to restore the previous state). Used by the SMP bootup code. - * NOTE: this is an __init function for security reasons. - */ -static inline int set_kernel_exec(unsigned long vaddr, int enable) -{ - return 0; -} - -#define pte_offset_map(dir, address) \ - ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address)) -#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) -#define pte_unmap(pte) do {} while (0) -#define pte_unmap_nested(pte) do {} while (0) - -/* - * The MN10300 has external MMU info in the form of a TLB: this is adapted from - * the kernel page tables containing the necessary information by tlb-mn10300.S - */ -extern void update_mmu_cache(struct vm_area_struct *vma, - unsigned long address, pte_t pte); - -#endif /* !__ASSEMBLY__ */ - -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range((vma), (vaddr), (pfn), (size), (prot)) - -#define MK_IOSPACE_PFN(space, pfn) (pfn) -#define GET_IOSPACE(pfn) 0 -#define GET_PFN(pfn) (pfn) - -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define __HAVE_ARCH_PTEP_MKDIRTY -#define __HAVE_ARCH_PTE_SAME -#include <asm-generic/pgtable.h> - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_PGTABLE_H */ diff --git a/include/asm-mn10300/pio-regs.h b/include/asm-mn10300/pio-regs.h deleted file mode 100644 index 96bc8182d0ba..000000000000 --- a/include/asm-mn10300/pio-regs.h +++ /dev/null @@ -1,233 +0,0 @@ -/* MN10300 On-board I/O port module registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PIO_REGS_H -#define _ASM_PIO_REGS_H - -#include <asm/cpu-regs.h> -#include <asm/intctl-regs.h> - -#ifdef __KERNEL__ - -/* I/O port 0 */ -#define P0MD __SYSREG(0xdb000000, u16) /* mode reg */ -#define P0MD_0 0x0003 /* mask */ -#define P0MD_0_IN 0x0000 /* input mode */ -#define P0MD_0_OUT 0x0001 /* output mode */ -#define P0MD_0_TM0IO 0x0002 /* timer 0 I/O mode */ -#define P0MD_0_EYECLK 0x0003 /* test signal output (clock) */ -#define P0MD_1 0x000c -#define P0MD_1_IN 0x0000 -#define P0MD_1_OUT 0x0004 -#define P0MD_1_TM1IO 0x0008 /* timer 1 I/O mode */ -#define P0MD_1_EYED 0x000c /* test signal output (data) */ -#define P0MD_2 0x0030 -#define P0MD_2_IN 0x0000 -#define P0MD_2_OUT 0x0010 -#define P0MD_2_TM2IO 0x0020 /* timer 2 I/O mode */ -#define P0MD_3 0x00c0 -#define P0MD_3_IN 0x0000 -#define P0MD_3_OUT 0x0040 -#define P0MD_3_TM3IO 0x0080 /* timer 3 I/O mode */ -#define P0MD_4 0x0300 -#define P0MD_4_IN 0x0000 -#define P0MD_4_OUT 0x0100 -#define P0MD_4_TM4IO 0x0200 /* timer 4 I/O mode */ -#define P0MD_4_XCTS 0x0300 /* XCTS input for serial port 2 */ -#define P0MD_5 0x0c00 -#define P0MD_5_IN 0x0000 -#define P0MD_5_OUT 0x0400 -#define P0MD_5_TM5IO 0x0800 /* timer 5 I/O mode */ -#define P0MD_6 0x3000 -#define P0MD_6_IN 0x0000 -#define P0MD_6_OUT 0x1000 -#define P0MD_6_TM6IOA 0x2000 /* timer 6 I/O mode A */ -#define P0MD_7 0xc000 -#define P0MD_7_IN 0x0000 -#define P0MD_7_OUT 0x4000 -#define P0MD_7_TM6IOB 0x8000 /* timer 6 I/O mode B */ - -#define P0IN __SYSREG(0xdb000004, u8) /* in reg */ -#define P0OUT __SYSREG(0xdb000008, u8) /* out reg */ - -#define P0TMIO __SYSREG(0xdb00000c, u8) /* TM pin I/O control reg */ -#define P0TMIO_TM0_IN 0x00 -#define P0TMIO_TM0_OUT 0x01 -#define P0TMIO_TM1_IN 0x00 -#define P0TMIO_TM1_OUT 0x02 -#define P0TMIO_TM2_IN 0x00 -#define P0TMIO_TM2_OUT 0x04 -#define P0TMIO_TM3_IN 0x00 -#define P0TMIO_TM3_OUT 0x08 -#define P0TMIO_TM4_IN 0x00 -#define P0TMIO_TM4_OUT 0x10 -#define P0TMIO_TM5_IN 0x00 -#define P0TMIO_TM5_OUT 0x20 -#define P0TMIO_TM6A_IN 0x00 -#define P0TMIO_TM6A_OUT 0x40 -#define P0TMIO_TM6B_IN 0x00 -#define P0TMIO_TM6B_OUT 0x80 - -/* I/O port 1 */ -#define P1MD __SYSREG(0xdb000100, u16) /* mode reg */ -#define P1MD_0 0x0003 /* mask */ -#define P1MD_0_IN 0x0000 /* input mode */ -#define P1MD_0_OUT 0x0001 /* output mode */ -#define P1MD_0_TM7IO 0x0002 /* timer 7 I/O mode */ -#define P1MD_0_ADTRG 0x0003 /* A/D converter trigger mode */ -#define P1MD_1 0x000c -#define P1MD_1_IN 0x0000 -#define P1MD_1_OUT 0x0004 -#define P1MD_1_TM8IO 0x0008 /* timer 8 I/O mode */ -#define P1MD_1_XDMR0 0x000c /* DMA request input 0 mode */ -#define P1MD_2 0x0030 -#define P1MD_2_IN 0x0000 -#define P1MD_2_OUT 0x0010 -#define P1MD_2_TM9IO 0x0020 /* timer 9 I/O mode */ -#define P1MD_2_XDMR1 0x0030 /* DMA request input 1 mode */ -#define P1MD_3 0x00c0 -#define P1MD_3_IN 0x0000 -#define P1MD_3_OUT 0x0040 -#define P1MD_3_TM10IO 0x0080 /* timer 10 I/O mode */ -#define P1MD_3_FRQS0 0x00c0 /* CPU clock multiplier setting input 0 mode */ -#define P1MD_4 0x0300 -#define P1MD_4_IN 0x0000 -#define P1MD_4_OUT 0x0100 -#define P1MD_4_TM11IO 0x0200 /* timer 11 I/O mode */ -#define P1MD_4_FRQS1 0x0300 /* CPU clock multiplier setting input 1 mode */ - -#define P1IN __SYSREG(0xdb000104, u8) /* in reg */ -#define P1OUT __SYSREG(0xdb000108, u8) /* out reg */ -#define P1TMIO __SYSREG(0xdb00010c, u8) /* TM pin I/O control reg */ -#define P1TMIO_TM11_IN 0x00 -#define P1TMIO_TM11_OUT 0x01 -#define P1TMIO_TM10_IN 0x00 -#define P1TMIO_TM10_OUT 0x02 -#define P1TMIO_TM9_IN 0x00 -#define P1TMIO_TM9_OUT 0x04 -#define P1TMIO_TM8_IN 0x00 -#define P1TMIO_TM8_OUT 0x08 -#define P1TMIO_TM7_IN 0x00 -#define P1TMIO_TM7_OUT 0x10 - -/* I/O port 2 */ -#define P2MD __SYSREG(0xdb000200, u16) /* mode reg */ -#define P2MD_0 0x0003 /* mask */ -#define P2MD_0_IN 0x0000 /* input mode */ -#define P2MD_0_OUT 0x0001 /* output mode */ -#define P2MD_0_BOOTBW 0x0003 /* boot bus width selector mode */ -#define P2MD_1 0x000c -#define P2MD_1_IN 0x0000 -#define P2MD_1_OUT 0x0004 -#define P2MD_1_BOOTSEL 0x000c /* boot device selector mode */ -#define P2MD_2 0x0030 -#define P2MD_2_IN 0x0000 -#define P2MD_2_OUT 0x0010 -#define P2MD_3 0x00c0 -#define P2MD_3_IN 0x0000 -#define P2MD_3_OUT 0x0040 -#define P2MD_3_CKIO 0x00c0 /* mode */ -#define P2MD_4 0x0300 -#define P2MD_4_IN 0x0000 -#define P2MD_4_OUT 0x0100 -#define P2MD_4_CMOD 0x0300 /* mode */ - -#define P2IN __SYSREG(0xdb000204, u8) /* in reg */ -#define P2OUT __SYSREG(0xdb000208, u8) /* out reg */ -#define P2TMIO __SYSREG(0xdb00020c, u8) /* TM pin I/O control reg */ - -/* I/O port 3 */ -#define P3MD __SYSREG(0xdb000300, u16) /* mode reg */ -#define P3MD_0 0x0003 /* mask */ -#define P3MD_0_IN 0x0000 /* input mode */ -#define P3MD_0_OUT 0x0001 /* output mode */ -#define P3MD_0_AFRXD 0x0002 /* AFR interface mode */ -#define P3MD_1 0x000c -#define P3MD_1_IN 0x0000 -#define P3MD_1_OUT 0x0004 -#define P3MD_1_AFTXD 0x0008 /* AFR interface mode */ -#define P3MD_2 0x0030 -#define P3MD_2_IN 0x0000 -#define P3MD_2_OUT 0x0010 -#define P3MD_2_AFSCLK 0x0020 /* AFR interface mode */ -#define P3MD_3 0x00c0 -#define P3MD_3_IN 0x0000 -#define P3MD_3_OUT 0x0040 -#define P3MD_3_AFFS 0x0080 /* AFR interface mode */ -#define P3MD_4 0x0300 -#define P3MD_4_IN 0x0000 -#define P3MD_4_OUT 0x0100 -#define P3MD_4_AFEHC 0x0200 /* AFR interface mode */ - -#define P3IN __SYSREG(0xdb000304, u8) /* in reg */ -#define P3OUT __SYSREG(0xdb000308, u8) /* out reg */ - -/* I/O port 4 */ -#define P4MD __SYSREG(0xdb000400, u16) /* mode reg */ -#define P4MD_0 0x0003 /* mask */ -#define P4MD_0_IN 0x0000 /* input mode */ -#define P4MD_0_OUT 0x0001 /* output mode */ -#define P4MD_0_SCL0 0x0002 /* I2C/serial mode */ -#define P4MD_1 0x000c -#define P4MD_1_IN 0x0000 -#define P4MD_1_OUT 0x0004 -#define P4MD_1_SDA0 0x0008 -#define P4MD_2 0x0030 -#define P4MD_2_IN 0x0000 -#define P4MD_2_OUT 0x0010 -#define P4MD_2_SCL1 0x0020 -#define P4MD_3 0x00c0 -#define P4MD_3_IN 0x0000 -#define P4MD_3_OUT 0x0040 -#define P4MD_3_SDA1 0x0080 -#define P4MD_4 0x0300 -#define P4MD_4_IN 0x0000 -#define P4MD_4_OUT 0x0100 -#define P4MD_4_SBO0 0x0200 -#define P4MD_5 0x0c00 -#define P4MD_5_IN 0x0000 -#define P4MD_5_OUT 0x0400 -#define P4MD_5_SBO1 0x0800 -#define P4MD_6 0x3000 -#define P4MD_6_IN 0x0000 -#define P4MD_6_OUT 0x1000 -#define P4MD_6_SBT0 0x2000 -#define P4MD_7 0xc000 -#define P4MD_7_IN 0x0000 -#define P4MD_7_OUT 0x4000 -#define P4MD_7_SBT1 0x8000 - -#define P4IN __SYSREG(0xdb000404, u8) /* in reg */ -#define P4OUT __SYSREG(0xdb000408, u8) /* out reg */ - -/* I/O port 5 */ -#define P5MD __SYSREG(0xdb000500, u16) /* mode reg */ -#define P5MD_0 0x0003 /* mask */ -#define P5MD_0_IN 0x0000 /* input mode */ -#define P5MD_0_OUT 0x0001 /* output mode */ -#define P5MD_0_IRTXD 0x0002 /* IrDA mode */ -#define P5MD_0_SOUT 0x0004 /* serial mode */ -#define P5MD_1 0x000c -#define P5MD_1_IN 0x0000 -#define P5MD_1_OUT 0x0004 -#define P5MD_1_IRRXDS 0x0008 /* IrDA mode */ -#define P5MD_1_SIN 0x000c /* serial mode */ -#define P5MD_2 0x0030 -#define P5MD_2_IN 0x0000 -#define P5MD_2_OUT 0x0010 -#define P5MD_2_IRRXDF 0x0020 /* IrDA mode */ - -#define P5IN __SYSREG(0xdb000504, u8) /* in reg */ -#define P5OUT __SYSREG(0xdb000508, u8) /* out reg */ - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PIO_REGS_H */ diff --git a/include/asm-mn10300/poll.h b/include/asm-mn10300/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/include/asm-mn10300/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/poll.h> diff --git a/include/asm-mn10300/posix_types.h b/include/asm-mn10300/posix_types.h deleted file mode 100644 index 077567c37798..000000000000 --- a/include/asm-mn10300/posix_types.h +++ /dev/null @@ -1,132 +0,0 @@ -/* MN10300 POSIX types - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_POSIX_TYPES_H -#define _ASM_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static inline void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ - -#endif /* _ASM_POSIX_TYPES_H */ diff --git a/include/asm-mn10300/proc-mn103e010/cache.h b/include/asm-mn10300/proc-mn103e010/cache.h deleted file mode 100644 index bdc1f9a59b4c..000000000000 --- a/include/asm-mn10300/proc-mn103e010/cache.h +++ /dev/null @@ -1,33 +0,0 @@ -/* MN103E010 Cache specification - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CACHE_H -#define _ASM_PROC_CACHE_H - -/* L1 cache */ - -#define L1_CACHE_NWAYS 4 /* number of ways in caches */ -#define L1_CACHE_NENTRIES 256 /* number of entries in each way */ -#define L1_CACHE_BYTES 16 /* bytes per entry */ -#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */ -#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */ - -#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ -#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ -#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */ -#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ - -/* - * specification of the interval between interrupt checking intervals whilst - * managing the cache with the interrupts disabled - */ -#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 - -#endif /* _ASM_PROC_CACHE_H */ diff --git a/include/asm-mn10300/proc-mn103e010/clock.h b/include/asm-mn10300/proc-mn103e010/clock.h deleted file mode 100644 index caf998350633..000000000000 --- a/include/asm-mn10300/proc-mn103e010/clock.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN103E010-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CLOCK_H -#define _ASM_PROC_CLOCK_H - -#include <asm/unit/clock.h> - -#define MN10300_WDCLK MN10300_IOCLK - -#endif /* _ASM_PROC_CLOCK_H */ diff --git a/include/asm-mn10300/proc-mn103e010/irq.h b/include/asm-mn10300/proc-mn103e010/irq.h deleted file mode 100644 index aa6ee8f98b1b..000000000000 --- a/include/asm-mn10300/proc-mn103e010/irq.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN103E010 On-board interrupt controller numbers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_IRQ_H -#define _ASM_PROC_IRQ_H - -#ifdef __KERNEL__ - -#define GxICR_NUM_IRQS 42 - -#define GxICR_NUM_XIRQS 8 - -#define XIRQ0 34 -#define XIRQ1 35 -#define XIRQ2 36 -#define XIRQ3 37 -#define XIRQ4 38 -#define XIRQ5 39 -#define XIRQ6 40 -#define XIRQ7 41 - -#define XIRQ2IRQ(num) (XIRQ0 + num) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PROC_IRQ_H */ diff --git a/include/asm-mn10300/proc-mn103e010/proc.h b/include/asm-mn10300/proc-mn103e010/proc.h deleted file mode 100644 index 22a2b93f70b7..000000000000 --- a/include/asm-mn10300/proc-mn103e010/proc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN103E010 Processor description - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_PROC_H -#define _ASM_PROC_PROC_H - -#define PROCESSOR_VENDOR_NAME "Matsushita" -#define PROCESSOR_MODEL_NAME "mn103e010" - -#endif /* _ASM_PROC_PROC_H */ diff --git a/include/asm-mn10300/processor.h b/include/asm-mn10300/processor.h deleted file mode 100644 index 73239271873d..000000000000 --- a/include/asm-mn10300/processor.h +++ /dev/null @@ -1,186 +0,0 @@ -/* MN10300 Processor specifics - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROCESSOR_H -#define _ASM_PROCESSOR_H - -#include <asm/page.h> -#include <asm/ptrace.h> -#include <asm/cpu-regs.h> -#include <linux/threads.h> - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() \ -({ \ - void *__pc; \ - asm("mov pc,%0" : "=a"(__pc)); \ - __pc; \ -}) - -extern void show_registers(struct pt_regs *regs); - -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * Members of this structure are referenced in head.S, so think twice - * before touching them. [mj] - */ - -struct mn10300_cpuinfo { - int type; - unsigned long loops_per_sec; - char hard_math; - unsigned long *pgd_quick; - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; -}; - -extern struct mn10300_cpuinfo boot_cpu_data; - -#define cpu_data &boot_cpu_data -#define current_cpu_data boot_cpu_data - -extern void identify_cpu(struct mn10300_cpuinfo *); -extern void print_cpu_info(struct mn10300_cpuinfo *); -extern void dodgy_tsc(void); -#define cpu_relax() barrier() - -/* - * User space process size: 1.75GB (default). - */ -#define TASK_SIZE 0x70000000 - -/* - * Where to put the userspace stack by default - */ -#define STACK_TOP 0x70000000 -#define STACK_TOP_MAX STACK_TOP - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE 0x30000000 - -typedef struct { - unsigned long seg; -} mm_segment_t; - -struct fpu_state_struct { - unsigned long fs[32]; /* fpu registers */ - unsigned long fpcr; /* fpu control register */ -}; - -struct thread_struct { - struct pt_regs *uregs; /* userspace register frame */ - unsigned long pc; /* kernel PC */ - unsigned long sp; /* kernel SP */ - unsigned long a3; /* kernel FP */ - unsigned long wchan; - unsigned long usp; - struct pt_regs *__frame; - unsigned long fpu_flags; -#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ - struct fpu_state_struct fpu_state; -}; - -#define INIT_THREAD \ -{ \ - .uregs = init_uregs, \ - .pc = 0, \ - .sp = 0, \ - .a3 = 0, \ - .wchan = 0, \ - .__frame = NULL, \ -} - -#define INIT_MMAP \ -{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \ - NULL, NULL } - -/* - * do necessary setup to start up a newly executed thread - * - need to discard the frame stacked by the kernel thread invoking the execve - * syscall (see RESTORE_ALL macro) - */ -#define start_thread(regs, new_pc, new_sp) do { \ - set_fs(USER_DS); \ - __frame = current->thread.uregs; \ - __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \ - __frame->pc = new_pc; \ - __frame->sp = new_sp; \ -} while (0) - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -extern void prepare_to_copy(struct task_struct *tsk); - -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -/* - * Return saved PC of a blocked thread. - */ -extern unsigned long thread_saved_pc(struct task_struct *tsk); - -unsigned long get_wchan(struct task_struct *p); - -#define task_pt_regs(task) \ -({ \ - struct pt_regs *__regs__; \ - __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \ - __regs__ - 1; \ -}) - -#define KSTK_EIP(task) (task_pt_regs(task)->pc) -#define KSTK_ESP(task) (task_pt_regs(task)->sp) - -#define KSTK_TOP(info) \ -({ \ - (unsigned long)(info) + THREAD_SIZE; \ -}) - -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW - -static inline void prefetch(const void *x) -{ -#ifndef CONFIG_MN10300_CACHE_DISABLED -#ifdef CONFIG_MN10300_PROC_MN103E010 - asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); -#else - asm volatile ("dcpf (%0)" : : "r"(x)); -#endif -#endif -} - -static inline void prefetchw(const void *x) -{ -#ifndef CONFIG_MN10300_CACHE_DISABLED -#ifdef CONFIG_MN10300_PROC_MN103E010 - asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); -#else - asm volatile ("dcpf (%0)" : : "r"(x)); -#endif -#endif -} - -#endif /* _ASM_PROCESSOR_H */ diff --git a/include/asm-mn10300/ptrace.h b/include/asm-mn10300/ptrace.h deleted file mode 100644 index 7b06cc623d8b..000000000000 --- a/include/asm-mn10300/ptrace.h +++ /dev/null @@ -1,103 +0,0 @@ -/* MN10300 Exception frame layout and ptrace constants - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PTRACE_H -#define _ASM_PTRACE_H - -#define PT_A3 0 -#define PT_A2 1 -#define PT_D3 2 -#define PT_D2 3 -#define PT_MCVF 4 -#define PT_MCRL 5 -#define PT_MCRH 6 -#define PT_MDRQ 7 -#define PT_E1 8 -#define PT_E0 9 -#define PT_E7 10 -#define PT_E6 11 -#define PT_E5 12 -#define PT_E4 13 -#define PT_E3 14 -#define PT_E2 15 -#define PT_SP 16 -#define PT_LAR 17 -#define PT_LIR 18 -#define PT_MDR 19 -#define PT_A1 20 -#define PT_A0 21 -#define PT_D1 22 -#define PT_D0 23 -#define PT_ORIG_D0 24 -#define PT_EPSW 25 -#define PT_PC 26 -#define NR_PTREGS 27 - -#ifndef __ASSEMBLY__ -/* - * This defines the way registers are stored in the event of an exception - * - the strange order is due to the MOVM instruction - */ -struct pt_regs { - unsigned long a3; /* syscall arg 3 */ - unsigned long a2; /* syscall arg 4 */ - unsigned long d3; /* syscall arg 5 */ - unsigned long d2; /* syscall arg 6 */ - unsigned long mcvf; - unsigned long mcrl; - unsigned long mcrh; - unsigned long mdrq; - unsigned long e1; - unsigned long e0; - unsigned long e7; - unsigned long e6; - unsigned long e5; - unsigned long e4; - unsigned long e3; - unsigned long e2; - unsigned long sp; - unsigned long lar; - unsigned long lir; - unsigned long mdr; - unsigned long a1; - unsigned long a0; /* syscall arg 1 */ - unsigned long d1; /* syscall arg 2 */ - unsigned long d0; /* syscall ret */ - struct pt_regs *next; /* next frame pointer */ - unsigned long orig_d0; /* syscall number */ - unsigned long epsw; - unsigned long pc; -}; -#endif - -extern struct pt_regs *__frame; /* current frame pointer */ - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 - -#if defined(__KERNEL__) - -#if !defined(__ASSEMBLY__) -#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) -#define instruction_pointer(regs) ((regs)->pc) -extern void show_regs(struct pt_regs *); -#endif /* !__ASSEMBLY */ - -#define profile_pc(regs) ((regs)->pc) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PTRACE_H */ diff --git a/include/asm-mn10300/reset-regs.h b/include/asm-mn10300/reset-regs.h deleted file mode 100644 index 174523d50132..000000000000 --- a/include/asm-mn10300/reset-regs.h +++ /dev/null @@ -1,64 +0,0 @@ -/* MN10300 Reset controller and watchdog timer definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_RESET_REGS_H -#define _ASM_RESET_REGS_H - -#include <asm/cpu-regs.h> -#include <asm/exceptions.h> - -#ifdef __KERNEL__ - -#ifdef CONFIG_MN10300_WD_TIMER -#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */ -#endif - -/* - * watchdog timer registers - */ -#define WDBC __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */ - -#define WDCTR __SYSREG(0xc0001002, u8) /* watchdog timer control reg */ -#define WDCTR_WDCK 0x07 /* clock source selection */ -#define WDCTR_WDCK_256th 0x00 /* - OSCI/256 */ -#define WDCTR_WDCK_1024th 0x01 /* - OSCI/1024 */ -#define WDCTR_WDCK_2048th 0x02 /* - OSCI/2048 */ -#define WDCTR_WDCK_16384th 0x03 /* - OSCI/16384 */ -#define WDCTR_WDCK_65536th 0x04 /* - OSCI/65536 */ -#define WDCTR_WDRST 0x40 /* binary counter reset */ -#define WDCTR_WDCNE 0x80 /* watchdog timer enable */ - -#define RSTCTR __SYSREG(0xc0001004, u8) /* reset control reg */ -#define RSTCTR_CHIPRST 0x01 /* chip reset */ -#define RSTCTR_DBFRST 0x02 /* double fault reset flag */ -#define RSTCTR_WDTRST 0x04 /* watchdog timer reset flag */ -#define RSTCTR_WDREN 0x08 /* watchdog timer reset enable */ - -#ifndef __ASSEMBLY__ - -static inline void mn10300_proc_hard_reset(void) -{ - RSTCTR &= ~RSTCTR_CHIPRST; - RSTCTR |= RSTCTR_CHIPRST; -} - -extern unsigned int watchdog_alert_counter; - -extern void watchdog_go(void); -extern asmlinkage void watchdog_handler(void); -extern asmlinkage -void watchdog_interrupt(struct pt_regs *, enum exception_code); - -#endif - -#endif /* __KERNEL__ */ - -#endif /* _ASM_RESET_REGS_H */ diff --git a/include/asm-mn10300/resource.h b/include/asm-mn10300/resource.h deleted file mode 100644 index 04bc4db8921b..000000000000 --- a/include/asm-mn10300/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/resource.h> diff --git a/include/asm-mn10300/rtc-regs.h b/include/asm-mn10300/rtc-regs.h deleted file mode 100644 index c42deefaec11..000000000000 --- a/include/asm-mn10300/rtc-regs.h +++ /dev/null @@ -1,86 +0,0 @@ -/* MN10300 on-chip Real-Time Clock registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_RTC_REGS_H -#define _ASM_RTC_REGS_H - -#include <asm/intctl-regs.h> - -#ifdef __KERNEL__ - -#define RTSCR __SYSREG(0xd8600000, u8) /* RTC seconds count reg */ -#define RTSAR __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */ -#define RTMCR __SYSREG(0xd8600002, u8) /* RTC minutes count reg */ -#define RTMAR __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */ -#define RTHCR __SYSREG(0xd8600004, u8) /* RTC hours count reg */ -#define RTHAR __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */ -#define RTDWCR __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */ -#define RTDMCR __SYSREG(0xd8600007, u8) /* RTC days count reg */ -#define RTMTCR __SYSREG(0xd8600008, u8) /* RTC months count reg */ -#define RTYCR __SYSREG(0xd8600009, u8) /* RTC years count reg */ - -#define RTCRA __SYSREG(0xd860000a, u8)/* RTC control reg A */ -#define RTCRA_RS 0x0f /* periodic timer interrupt cycle setting */ -#define RTCRA_RS_NONE 0x00 /* - off */ -#define RTCRA_RS_3_90625ms 0x01 /* - 3.90625ms (1/256s) */ -#define RTCRA_RS_7_8125ms 0x02 /* - 7.8125ms (1/128s) */ -#define RTCRA_RS_122_070us 0x03 /* - 122.070us (1/8192s) */ -#define RTCRA_RS_244_141us 0x04 /* - 244.141us (1/4096s) */ -#define RTCRA_RS_488_281us 0x05 /* - 488.281us (1/2048s) */ -#define RTCRA_RS_976_5625us 0x06 /* - 976.5625us (1/1024s) */ -#define RTCRA_RS_1_953125ms 0x07 /* - 1.953125ms (1/512s) */ -#define RTCRA_RS_3_90624ms 0x08 /* - 3.90624ms (1/256s) */ -#define RTCRA_RS_7_8125ms_b 0x09 /* - 7.8125ms (1/128s) */ -#define RTCRA_RS_15_625ms 0x0a /* - 15.625ms (1/64s) */ -#define RTCRA_RS_31_25ms 0x0b /* - 31.25ms (1/32s) */ -#define RTCRA_RS_62_5ms 0x0c /* - 62.5ms (1/16s) */ -#define RTCRA_RS_125ms 0x0d /* - 125ms (1/8s) */ -#define RTCRA_RS_250ms 0x0e /* - 250ms (1/4s) */ -#define RTCRA_RS_500ms 0x0f /* - 500ms (1/2s) */ -#define RTCRA_DVR 0x40 /* divider reset */ -#define RTCRA_UIP 0x80 /* clock update flag */ - -#define RTCRB __SYSREG(0xd860000b, u8) /* RTC control reg B */ -#define RTCRB_DSE 0x01 /* daylight savings time enable */ -#define RTCRB_TM 0x02 /* time format */ -#define RTCRB_TM_12HR 0x00 /* - 12 hour format */ -#define RTCRB_TM_24HR 0x02 /* - 24 hour format */ -#define RTCRB_DM 0x04 /* numeric value format */ -#define RTCRB_DM_BCD 0x00 /* - BCD */ -#define RTCRB_DM_BINARY 0x04 /* - binary */ -#define RTCRB_UIE 0x10 /* update interrupt disable */ -#define RTCRB_AIE 0x20 /* alarm interrupt disable */ -#define RTCRB_PIE 0x40 /* periodic interrupt disable */ -#define RTCRB_SET 0x80 /* clock update enable */ - -#define RTSRC __SYSREG(0xd860000c, u8) /* RTC status reg C */ -#define RTSRC_UF 0x10 /* update end interrupt flag */ -#define RTSRC_AF 0x20 /* alarm interrupt flag */ -#define RTSRC_PF 0x40 /* periodic interrupt flag */ -#define RTSRC_IRQF 0x80 /* interrupt flag */ - -#define RTIRQ 32 -#define RTICR GxICR(RTIRQ) - -/* - * MC146818 RTC compatibility defs for the MN10300 on-chip RTC - */ -#define RTC_PORT(x) 0xd8600000 -#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ - -#define CMOS_READ(addr) __SYSREG(0xd8600000 + (addr), u8) -#define CMOS_WRITE(val, addr) \ - do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0) - -#define RTC_IRQ RTIRQ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_RTC_REGS_H */ diff --git a/include/asm-mn10300/rtc.h b/include/asm-mn10300/rtc.h deleted file mode 100644 index c295194cc703..000000000000 --- a/include/asm-mn10300/rtc.h +++ /dev/null @@ -1,41 +0,0 @@ -/* MN10300 Real time clock definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_RTC_H -#define _ASM_RTC_H - -#ifdef CONFIG_MN10300_RTC - -#include <linux/init.h> - -extern void check_rtc_time(void); -extern void __init calibrate_clock(void); -extern unsigned long __init get_initial_rtc_time(void); - -#else /* !CONFIG_MN10300_RTC */ - -static inline void check_rtc_time(void) -{ -} - -static inline void calibrate_clock(void) -{ -} - -static inline unsigned long get_initial_rtc_time(void) -{ - return 0; -} - -#endif /* !CONFIG_MN10300_RTC */ - -#include <asm-generic/rtc.h> - -#endif /* _ASM_RTC_H */ diff --git a/include/asm-mn10300/scatterlist.h b/include/asm-mn10300/scatterlist.h deleted file mode 100644 index 67535901b9ff..000000000000 --- a/include/asm-mn10300/scatterlist.h +++ /dev/null @@ -1,55 +0,0 @@ -/* MN10300 Scatterlist definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SCATTERLIST_H -#define _ASM_SCATTERLIST_H - -#include <asm/types.h> - -/* - * Drivers must set either ->address or (preferred) page and ->offset - * to indicate where data must be transferred to/from. - * - * Using page is recommended since it handles highmem data as well as - * low mem. ->address is restricted to data which has a virtual mapping, and - * it will go away in the future. Updating to page can be automated very - * easily -- something like - * - * sg->address = some_ptr; - * - * can be rewritten as - * - * sg_set_page(virt_to_page(some_ptr)); - * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK; - * - * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens - */ -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* for highmem, page offset */ - dma_addr_t dma_address; - unsigned int length; -}; - -#define ISA_DMA_THRESHOLD (0x00ffffff) - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#endif /* _ASM_SCATTERLIST_H */ diff --git a/include/asm-mn10300/sections.h b/include/asm-mn10300/sections.h deleted file mode 100644 index 2b8c5160388f..000000000000 --- a/include/asm-mn10300/sections.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/sections.h> diff --git a/include/asm-mn10300/sembuf.h b/include/asm-mn10300/sembuf.h deleted file mode 100644 index 301f3f9d8aa9..000000000000 --- a/include/asm-mn10300/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_SEMBUF_H -#define _ASM_SEMBUF_H - -/* - * The semid64_ds structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SEMBUF_H */ diff --git a/include/asm-mn10300/serial-regs.h b/include/asm-mn10300/serial-regs.h deleted file mode 100644 index 6498469e93ac..000000000000 --- a/include/asm-mn10300/serial-regs.h +++ /dev/null @@ -1,160 +0,0 @@ -/* MN10300 on-board serial port module registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_SERIAL_REGS_H -#define _ASM_SERIAL_REGS_H - -#include <asm/cpu-regs.h> -#include <asm/intctl-regs.h> - -#ifdef __KERNEL__ - -/* serial port 0 */ -#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */ -#define SC01CTR_CK 0x0007 /* clock source select */ -#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ -#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ -#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ -#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ -#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */ -#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */ -#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ -#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ -#define SC01CTR_STB 0x0008 /* stop bit select */ -#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */ -#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */ -#define SC01CTR_PB 0x0070 /* parity bit select */ -#define SC01CTR_PB_NONE 0x0000 /* - no parity */ -#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ -#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ -#define SC01CTR_PB_EVEN 0x0060 /* - even parity */ -#define SC01CTR_PB_ODD 0x0070 /* - odd parity */ -#define SC01CTR_CLN 0x0080 /* character length */ -#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ -#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ -#define SC01CTR_TOE 0x0100 /* T input output enable */ -#define SC01CTR_OD 0x0200 /* bit order select */ -#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */ -#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */ -#define SC01CTR_MD 0x0c00 /* mode select */ -#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */ -#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */ -#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */ -#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */ -#define SC01CTR_IIC 0x1000 /* I2C mode select */ -#define SC01CTR_BKE 0x2000 /* break transmit enable */ -#define SC01CTR_RXE 0x4000 /* receive enable */ -#define SC01CTR_TXE 0x8000 /* transmit enable */ - -#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */ -#define SC01ICR_DMD 0x80 /* output data mode */ -#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */ -#define SC01ICR_TI 0x10 /* transmit interrupt cause */ -#define SC01ICR_RES 0x04 /* receive error select */ -#define SC01ICR_RI 0x01 /* receive interrupt cause */ - -#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */ -#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */ - -#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */ -#define SC01STR_OEF 0x0001 /* overrun error found */ -#define SC01STR_PEF 0x0002 /* parity error found */ -#define SC01STR_FEF 0x0004 /* framing error found */ -#define SC01STR_RBF 0x0010 /* receive buffer status */ -#define SC01STR_TBF 0x0020 /* transmit buffer status */ -#define SC01STR_RXF 0x0040 /* receive status */ -#define SC01STR_TXF 0x0080 /* transmit status */ -#define SC01STR_STF 0x0100 /* I2C start sequence found */ -#define SC01STR_SPF 0x0200 /* I2C stop sequence found */ - -#define SC0RXIRQ 20 /* timer 0 Receive IRQ */ -#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */ - -#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */ -#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */ - -/* serial port 1 */ -#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */ -#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */ -#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ -#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ -#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */ - -#define SC1RXIRQ 22 /* timer 1 Receive IRQ */ -#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */ - -#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */ -#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */ - -/* serial port 2 */ -#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */ -#define SC2CTR_CK 0x0003 /* clock source select */ -#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */ -#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */ -#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */ -#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */ -#define SC2CTR_STB 0x0008 /* stop bit select */ -#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */ -#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */ -#define SC2CTR_PB 0x0070 /* parity bit select */ -#define SC2CTR_PB_NONE 0x0000 /* - no parity */ -#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ -#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ -#define SC2CTR_PB_EVEN 0x0060 /* - even parity */ -#define SC2CTR_PB_ODD 0x0070 /* - odd parity */ -#define SC2CTR_CLN 0x0080 /* character length */ -#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ -#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ -#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */ -#define SC2CTR_OD 0x0200 /* bit order select */ -#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */ -#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */ -#define SC2CTR_TWS 0x1000 /* transmit wait select */ -#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */ -#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */ -#define SC2CTR_BKE 0x2000 /* break transmit enable */ -#define SC2CTR_RXE 0x4000 /* receive enable */ -#define SC2CTR_TXE 0x8000 /* transmit enable */ - -#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */ -#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */ -#define SC2ICR_TI 0x10 /* transmit interrupt cause */ -#define SC2ICR_RES 0x04 /* receive error select */ -#define SC2ICR_RI 0x01 /* receive interrupt cause */ - -#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ -#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ -#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */ -#define SC2STR_OEF 0x0001 /* overrun error found */ -#define SC2STR_PEF 0x0002 /* parity error found */ -#define SC2STR_FEF 0x0004 /* framing error found */ -#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */ -#define SC2STR_RBF 0x0010 /* receive buffer status */ -#define SC2STR_TBF 0x0020 /* transmit buffer status */ -#define SC2STR_RXF 0x0040 /* receive status */ -#define SC2STR_TXF 0x0080 /* transmit status */ - -#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */ - -#define SC2RXIRQ 24 /* serial 2 Receive IRQ */ -#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */ - -#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */ -#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */ - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_SERIAL_REGS_H */ diff --git a/include/asm-mn10300/serial.h b/include/asm-mn10300/serial.h deleted file mode 100644 index 99785a9deadb..000000000000 --- a/include/asm-mn10300/serial.h +++ /dev/null @@ -1,36 +0,0 @@ -/* Standard UART definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -/* - * The ASB2305 has an 18.432 MHz clock the UART - */ -#define BASE_BAUD (18432000 / 16) - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF -#endif - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#define HUB6_FLAGS 0 -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE -#endif - -#include <asm/unit/serial.h> diff --git a/include/asm-mn10300/setup.h b/include/asm-mn10300/setup.h deleted file mode 100644 index 08356c832283..000000000000 --- a/include/asm-mn10300/setup.h +++ /dev/null @@ -1,17 +0,0 @@ -/* MN10300 Setup declarations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SETUP_H -#define _ASM_SETUP_H - -extern void __init unit_setup(void); -extern void __init unit_init_IRQ(void); - -#endif /* _ASM_SETUP_H */ diff --git a/include/asm-mn10300/shmbuf.h b/include/asm-mn10300/shmbuf.h deleted file mode 100644 index 8f300cc35d6c..000000000000 --- a/include/asm-mn10300/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASM_SHMBUF_H -#define _ASM_SHMBUF_H - -/* - * The shmid64_ds structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SHMBUF_H */ diff --git a/include/asm-mn10300/shmparam.h b/include/asm-mn10300/shmparam.h deleted file mode 100644 index ab666ed1a070..000000000000 --- a/include/asm-mn10300/shmparam.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_SHMPARAM_H -#define _ASM_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_SHMPARAM_H */ diff --git a/include/asm-mn10300/sigcontext.h b/include/asm-mn10300/sigcontext.h deleted file mode 100644 index 4de3afff4ad7..000000000000 --- a/include/asm-mn10300/sigcontext.h +++ /dev/null @@ -1,52 +0,0 @@ -/* MN10300 Userspace signal context - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SIGCONTEXT_H -#define _ASM_SIGCONTEXT_H - -struct fpucontext { - /* Regular FPU environment */ - unsigned long fs[32]; /* fpu registers */ - unsigned long fpcr; /* fpu control register */ -}; - -struct sigcontext { - unsigned long d0; - unsigned long d1; - unsigned long d2; - unsigned long d3; - unsigned long a0; - unsigned long a1; - unsigned long a2; - unsigned long a3; - unsigned long e0; - unsigned long e1; - unsigned long e2; - unsigned long e3; - unsigned long e4; - unsigned long e5; - unsigned long e6; - unsigned long e7; - unsigned long lar; - unsigned long lir; - unsigned long mdr; - unsigned long mcvf; - unsigned long mcrl; - unsigned long mcrh; - unsigned long mdrq; - unsigned long sp; - unsigned long epsw; - unsigned long pc; - struct fpucontext *fpucontext; - unsigned long oldmask; -}; - - -#endif /* _ASM_SIGCONTEXT_H */ diff --git a/include/asm-mn10300/siginfo.h b/include/asm-mn10300/siginfo.h deleted file mode 100644 index 0815d29d82e5..000000000000 --- a/include/asm-mn10300/siginfo.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/siginfo.h> diff --git a/include/asm-mn10300/signal.h b/include/asm-mn10300/signal.h deleted file mode 100644 index e98817cec5f7..000000000000 --- a/include/asm-mn10300/signal.h +++ /dev/null @@ -1,171 +0,0 @@ -/* MN10300 Signal definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SIGNAL_H -#define _ASM_SIGNAL_H - -#include <linux/types.h> - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX (_NSIG-1) - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001U -#define SA_NOCLDWAIT 0x00000002U -#define SA_SIGINFO 0x00000004U -#define SA_ONSTACK 0x08000000U -#define SA_RESTART 0x10000000U -#define SA_NODEFER 0x40000000U -#define SA_RESETHAND 0x80000000U - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include <asm-generic/signal.h> - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include <asm/sigcontext.h> - - -struct pt_regs; -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_SIGNAL_H */ diff --git a/include/asm-mn10300/smp.h b/include/asm-mn10300/smp.h deleted file mode 100644 index 4eb8c61b7dab..000000000000 --- a/include/asm-mn10300/smp.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN10300 SMP support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SMP_H -#define _ASM_SMP_H - -#ifdef CONFIG_SMP -#error SMP not yet supported for MN10300 -#endif - -#endif diff --git a/include/asm-mn10300/socket.h b/include/asm-mn10300/socket.h deleted file mode 100644 index fb5daf438ec9..000000000000 --- a/include/asm-mn10300/socket.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-mn10300/sockios.h b/include/asm-mn10300/sockios.h deleted file mode 100644 index b03043a1c564..000000000000 --- a/include/asm-mn10300/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_SOCKIOS_H -#define _ASM_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_SOCKIOS_H */ diff --git a/include/asm-mn10300/spinlock.h b/include/asm-mn10300/spinlock.h deleted file mode 100644 index 4bf9c8b169e0..000000000000 --- a/include/asm-mn10300/spinlock.h +++ /dev/null @@ -1,16 +0,0 @@ -/* MN10300 spinlock support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SPINLOCK_H -#define _ASM_SPINLOCK_H - -#error SMP spinlocks not implemented for MN10300 - -#endif /* _ASM_SPINLOCK_H */ diff --git a/include/asm-mn10300/stat.h b/include/asm-mn10300/stat.h deleted file mode 100644 index 63ff8371cf2c..000000000000 --- a/include/asm-mn10300/stat.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef _ASM_STAT_H -#define _ASM_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned int st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#define STAT_HAVE_NSEC 1 - -#endif /* _ASM_STAT_H */ diff --git a/include/asm-mn10300/statfs.h b/include/asm-mn10300/statfs.h deleted file mode 100644 index 0b91fe198c20..000000000000 --- a/include/asm-mn10300/statfs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/statfs.h> diff --git a/include/asm-mn10300/string.h b/include/asm-mn10300/string.h deleted file mode 100644 index 47dbd4346c32..000000000000 --- a/include/asm-mn10300/string.h +++ /dev/null @@ -1,32 +0,0 @@ -/* MN10300 Optimised string functions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_STRING_H -#define _ASM_STRING_H - -#define __HAVE_ARCH_MEMSET -#define __HAVE_ARCH_MEMCPY -#define __HAVE_ARCH_MEMMOVE - -extern void *memset(void *dest, int ch, size_t count); -extern void *memcpy(void *dest, const void *src, size_t count); -extern void *memmove(void *dest, const void *src, size_t count); - - -extern void __struct_cpy_bug(void); -#define struct_cpy(x, y) \ -({ \ - if (sizeof(*(x)) != sizeof(*(y))) \ - __struct_cpy_bug; \ - memcpy(x, y, sizeof(*(x))); \ -}) - -#endif /* _ASM_STRING_H */ diff --git a/include/asm-mn10300/swab.h b/include/asm-mn10300/swab.h deleted file mode 100644 index bd818a820ca8..000000000000 --- a/include/asm-mn10300/swab.h +++ /dev/null @@ -1,42 +0,0 @@ -/* MN10300 Byte-order primitive construction - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SWAB_H -#define _ASM_SWAB_H - -#include <linux/types.h> - -#ifdef __GNUC__ - -static inline __attribute__((const)) -__u32 __arch_swab32(__u32 x) -{ - __u32 ret; - asm("swap %1,%0" : "=r" (ret) : "r" (x)); - return ret; -} -#define __arch_swab32 __arch_swab32 - -static inline __attribute__((const)) -__u16 __arch_swab16(__u16 x) -{ - __u16 ret; - asm("swaph %1,%0" : "=r" (ret) : "r" (x)); - return ret; -} -#define __arch_swab32 __arch_swab32 - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#endif /* __GNUC__ */ - -#endif /* _ASM_SWAB_H */ diff --git a/include/asm-mn10300/system.h b/include/asm-mn10300/system.h deleted file mode 100644 index 8214fb7e7fe4..000000000000 --- a/include/asm-mn10300/system.h +++ /dev/null @@ -1,237 +0,0 @@ -/* MN10300 System definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SYSTEM_H -#define _ASM_SYSTEM_H - -#include <asm/cpu-regs.h> - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#include <linux/kernel.h> - -struct task_struct; -struct thread_struct; - -extern asmlinkage -struct task_struct *__switch_to(struct thread_struct *prev, - struct thread_struct *next, - struct task_struct *prev_task); - -/* context switching is now performed out-of-line in switch_to.S */ -#define switch_to(prev, next, last) \ -do { \ - current->thread.wchan = (u_long) __builtin_return_address(0); \ - (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ - mb(); \ - current->thread.wchan = 0; \ -} while (0) - -#define arch_align_stack(x) (x) - -#define nop() asm volatile ("nop") - -#endif /* !__ASSEMBLY__ */ - -/* - * Force strict CPU ordering. - * And yes, this is required on UP too when we're talking - * to devices. - * - * For now, "wmb()" doesn't actually do anything, as all - * Intel CPU's follow what Intel calls a *Processor Order*, - * in which all writes are seen in the program order even - * outside the CPU. - * - * I expect future Intel CPU's to have a weaker ordering, - * but I'd also expect them to finally get their act together - * and add some real memory barriers if so. - * - * Some non intel clones support out of order store. wmb() ceases to be a - * nop for these. - */ - -#define mb() asm volatile ("": : :"memory") -#define rmb() mb() -#define wmb() asm volatile ("": : :"memory") - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#endif - -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define set_wmb(var, value) do { var = value; wmb(); } while (0) - -#define read_barrier_depends() do {} while (0) -#define smp_read_barrier_depends() do {} while (0) - -/*****************************************************************************/ -/* - * interrupt control - * - "disabled": run in IM1/2 - * - level 0 - GDB stub - * - level 1 - virtual serial DMA (if present) - * - level 5 - normal interrupt priority - * - level 6 - timer interrupt - * - "enabled": run in IM7 - */ -#ifdef CONFIG_MN10300_TTYSM -#define MN10300_CLI_LEVEL EPSW_IM_2 -#else -#define MN10300_CLI_LEVEL EPSW_IM_1 -#endif - -#define local_save_flags(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov epsw,%0 \n" \ - : "=d"(x) \ - ); \ -} while (0) - -#define local_irq_disable() \ -do { \ - asm volatile( \ - " and %0,epsw \n" \ - " or %1,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \ - ); \ -} while (0) - -#define local_irq_save(x) \ -do { \ - local_save_flags(x); \ - local_irq_disable(); \ -} while (0) - -/* - * we make sure local_irq_enable() doesn't cause priority inversion - */ -#ifndef __ASSEMBLY__ - -extern unsigned long __mn10300_irq_enabled_epsw; - -#endif - -#define local_irq_enable() \ -do { \ - unsigned long tmp; \ - \ - asm volatile( \ - " mov epsw,%0 \n" \ - " and %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,epsw \n" \ - : "=&d"(tmp) \ - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \ - ); \ -} while (0) - -#define local_irq_restore(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "d"(x) \ - : "memory", "cc" \ - ); \ -} while (0) - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \ -}) - -/* hook to save power by halting the CPU - * - called from the idle loop - * - must reenable interrupts (which takes three instruction cycles to complete) - */ -#define safe_halt() \ -do { \ - asm volatile(" or %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " bset %2,(%1) \n" \ - : \ - : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\ - : "cc" \ - ); \ -} while (0) - -#define STI or EPSW_IE|EPSW_IM,epsw -#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop - -/*****************************************************************************/ -/* - * MN10300 doesn't actually have an exchange instruction - */ -#ifndef __ASSEMBLY__ - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((struct __xchg_dummy *)(x)) - -static inline -unsigned long __xchg(volatile unsigned long *m, unsigned long val) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -#define xchg(ptr, v) \ - ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ - (unsigned long)(v))) - -static inline unsigned long __cmpxchg(volatile unsigned long *m, - unsigned long old, unsigned long new) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - if (retval == old) - *m = new; - local_irq_restore(flags); - return retval; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ - (unsigned long)(o), \ - (unsigned long)(n))) - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_SYSTEM_H */ diff --git a/include/asm-mn10300/termbits.h b/include/asm-mn10300/termbits.h deleted file mode 100644 index eb2b0dc1f696..000000000000 --- a/include/asm-mn10300/termbits.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef _ASM_TERMBITS_H -#define _ASM_TERMBITS_H - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ -#define CTVB 004000000000 /* VisioBraille Terminal flow control */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_TERMBITS_H */ diff --git a/include/asm-mn10300/termios.h b/include/asm-mn10300/termios.h deleted file mode 100644 index dd7cf617e118..000000000000 --- a/include/asm-mn10300/termios.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef _ASM_TERMIOS_H -#define _ASM_TERMIOS_H - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp, &(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) \ - copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) \ - copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) \ - copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) \ - copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _ASM_TERMIOS_H */ diff --git a/include/asm-mn10300/thread_info.h b/include/asm-mn10300/thread_info.h deleted file mode 100644 index 78a3881f3c12..000000000000 --- a/include/asm-mn10300/thread_info.h +++ /dev/null @@ -1,170 +0,0 @@ -/* MN10300 Low-level thread information - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include <asm/page.h> - -#ifndef __ASSEMBLY__ -#include <asm/processor.h> -#endif - -#define PREEMPT_ACTIVE 0x10000000 - -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE (4096) -#else -#define THREAD_SIZE (8192) -#endif - -#define STACK_WARN (THREAD_SIZE / 8) - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants - * must also be changed - */ -#ifndef __ASSEMBLY__ - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - __u32 cpu; /* current CPU */ - __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ - - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF for user-thead - 0-0xFFFFFFFF for kernel-thread - */ - struct restart_block restart_block; - - __u8 supervisor_stack[0]; -}; - -#else /* !__ASSEMBLY__ */ - -#ifndef __ASM_OFFSETS_H__ -#include <asm/asm-offsets.h> -#endif - -#endif - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) -#define init_uregs \ - ((struct pt_regs *) \ - ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs))) - -extern struct thread_info *__current_ti; - -/* how to get the thread information struct from C */ -static inline __attribute__((const)) -struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - asm("mov sp,%0\n" - "and %1,%0\n" - : "=d" (ti) - : "i" (~(THREAD_SIZE - 1)) - : "cc"); - return ti; -} - -/* how to get the current stack pointer from C */ -static inline unsigned long current_stack_pointer(void) -{ - unsigned long sp; - asm("mov sp,%0; ":"=r" (sp)); - return sp; -} - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL) -#else -#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) -#endif - -#define free_thread_info(ti) kfree((ti)) -#define get_thread_info(ti) get_task_struct((ti)->task) -#define put_thread_info(ti) put_task_struct((ti)->task) - -#else /* !__ASSEMBLY__ */ - -#ifndef __VMLINUX_LDS__ -/* how to get the thread information struct from ASM */ -.macro GET_THREAD_INFO reg - mov sp,\reg - and -THREAD_SIZE,\reg -.endm -#endif -#endif - -/* - * thread information flags - * - these are process state flags that various assembly files may need to - * access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ -#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ -#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 /* OOM killer killed process */ -#define TIF_FREEZE 18 /* freezing for suspend */ - -#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE) -#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME) -#define _TIF_SIGPENDING +(1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED +(1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP) -#define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK) -#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG) -#define _TIF_FREEZE +(1 << TIF_FREEZE) - -#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ -#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-mn10300/timer-regs.h b/include/asm-mn10300/timer-regs.h deleted file mode 100644 index 1d883b7f94ab..000000000000 --- a/include/asm-mn10300/timer-regs.h +++ /dev/null @@ -1,293 +0,0 @@ -/* AM33v2 on-board timer module registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_TIMER_REGS_H -#define _ASM_TIMER_REGS_H - -#include <asm/cpu-regs.h> -#include <asm/intctl-regs.h> - -#ifdef __KERNEL__ - -/* timer prescalar control */ -#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */ -#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */ -#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */ - -/* 8 bit timers */ -#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */ -#define TM0MD_SRC 0x07 /* timer source */ -#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ -#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */ -#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM1MD __SYSREG(0xd4003001, u8) /* timer 1 mode register */ -#define TM1MD_SRC 0x07 /* timer source */ -#define TM1MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM1MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM1MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */ -#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */ -#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM2MD __SYSREG(0xd4003002, u8) /* timer 2 mode register */ -#define TM2MD_SRC 0x07 /* timer source */ -#define TM2MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM2MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM2MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */ -#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */ -#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM3MD __SYSREG(0xd4003003, u8) /* timer 3 mode register */ -#define TM3MD_SRC 0x07 /* timer source */ -#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */ -#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */ -#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM01MD __SYSREG(0xd4003000, u16) /* timer 0:1 mode register */ - -#define TM0BR __SYSREG(0xd4003010, u8) /* timer 0 base register */ -#define TM1BR __SYSREG(0xd4003011, u8) /* timer 1 base register */ -#define TM2BR __SYSREG(0xd4003012, u8) /* timer 2 base register */ -#define TM3BR __SYSREG(0xd4003013, u8) /* timer 3 base register */ -#define TM01BR __SYSREG(0xd4003010, u16) /* timer 0:1 base register */ - -#define TM0BC __SYSREGC(0xd4003020, u8) /* timer 0 binary counter */ -#define TM1BC __SYSREGC(0xd4003021, u8) /* timer 1 binary counter */ -#define TM2BC __SYSREGC(0xd4003022, u8) /* timer 2 binary counter */ -#define TM3BC __SYSREGC(0xd4003023, u8) /* timer 3 binary counter */ -#define TM01BC __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */ - -#define TM0IRQ 2 /* timer 0 IRQ */ -#define TM1IRQ 3 /* timer 1 IRQ */ -#define TM2IRQ 4 /* timer 2 IRQ */ -#define TM3IRQ 5 /* timer 3 IRQ */ - -#define TM0ICR GxICR(TM0IRQ) /* timer 0 uflow intr ctrl reg */ -#define TM1ICR GxICR(TM1IRQ) /* timer 1 uflow intr ctrl reg */ -#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */ -#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */ - -/* 16-bit timers 4,5 & 7-11 */ -#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */ -#define TM4MD_SRC 0x07 /* timer source */ -#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM4MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM4MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */ -#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM5MD __SYSREG(0xd4003082, u8) /* timer 5 mode register */ -#define TM5MD_SRC 0x07 /* timer source */ -#define TM5MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM5MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM5MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM5MD_SRC_TM4CASCADE 0x03 /* - cascade with timer 4 */ -#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */ -#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM7MD __SYSREG(0xd4003086, u8) /* timer 7 mode register */ -#define TM7MD_SRC 0x07 /* timer source */ -#define TM7MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM7MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM7MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */ -#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM8MD __SYSREG(0xd4003088, u8) /* timer 8 mode register */ -#define TM8MD_SRC 0x07 /* timer source */ -#define TM8MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM8MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM8MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM8MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ -#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */ -#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM9MD __SYSREG(0xd400308a, u8) /* timer 9 mode register */ -#define TM9MD_SRC 0x07 /* timer source */ -#define TM9MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM9MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM9MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM9MD_SRC_TM8CASCADE 0x03 /* - cascade with timer 8 */ -#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */ -#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM10MD __SYSREG(0xd400308c, u8) /* timer 10 mode register */ -#define TM10MD_SRC 0x07 /* timer source */ -#define TM10MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM10MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM10MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM10MD_SRC_TM9CASCADE 0x03 /* - cascade with timer 9 */ -#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */ -#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM11MD __SYSREG(0xd400308e, u8) /* timer 11 mode register */ -#define TM11MD_SRC 0x07 /* timer source */ -#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ -#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */ -#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */ -#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */ -#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */ -#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */ -#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */ -#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */ -#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */ -#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ - -#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */ -#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */ -#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */ - -#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */ -#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */ -#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */ -#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */ -#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */ - -#define TM4IRQ 6 /* timer 4 IRQ */ -#define TM5IRQ 7 /* timer 5 IRQ */ -#define TM7IRQ 11 /* timer 7 IRQ */ -#define TM8IRQ 12 /* timer 8 IRQ */ -#define TM9IRQ 13 /* timer 9 IRQ */ -#define TM10IRQ 14 /* timer 10 IRQ */ -#define TM11IRQ 15 /* timer 11 IRQ */ - -#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */ -#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */ -#define TM7ICR GxICR(TM7IRQ) /* timer 7 uflow intr ctrl reg */ -#define TM8ICR GxICR(TM8IRQ) /* timer 8 uflow intr ctrl reg */ -#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */ -#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */ -#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */ - -/* 16-bit timer 6 */ -#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */ -#define TM6MD_SRC 0x0007 /* timer source */ -#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */ -#define TM6MD_SRC_IOCLK_8 0x0001 /* - 1/8 IOCLK */ -#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */ -#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */ -#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */ -#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */ -#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */ -#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ -#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */ -#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */ -#define TM6MD_PWM 0x3800 /* PWM output mode */ -#define TM6MD_PWM_DIS 0x0000 /* - disabled */ -#define TM6MD_PWM_10BIT 0x1000 /* - 10 bits mode */ -#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */ -#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */ -#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */ -#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */ -#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */ - -#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */ -#define TM6MDA_OUT 0x07 /* output select */ -#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */ -#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */ -#define TM6MDA_OUT_SETA 0x02 /* - set at match A */ -#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */ -#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */ -#define TM6MDA_MODE 0xc0 /* compare A register mode */ -#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ -#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ -#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ -#define TM6MDA_EDGE 0x20 /* compare A edge select */ -#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */ -#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */ -#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */ - -#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */ -#define TM6MDB_OUT 0x07 /* output select */ -#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */ -#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */ -#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */ -#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */ -#define TM6MDB_MODE 0xc0 /* compare B register mode */ -#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ -#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ -#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ -#define TM6MDB_EDGE 0x20 /* compare B edge select */ -#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */ -#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */ -#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */ - -#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */ -#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */ -#define TM6BC __SYSREG(0xd40030a4, u16) /* timer6 binary counter */ - -#define TM6IRQ 6 /* timer 6 IRQ */ -#define TM6AIRQ 9 /* timer 6A IRQ */ -#define TM6BIRQ 10 /* timer 6B IRQ */ - -#define TM6ICR GxICR(TM6IRQ) /* timer 6 uflow intr ctrl reg */ -#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */ -#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TIMER_REGS_H */ diff --git a/include/asm-mn10300/timex.h b/include/asm-mn10300/timex.h deleted file mode 100644 index 3944277dab67..000000000000 --- a/include/asm-mn10300/timex.h +++ /dev/null @@ -1,33 +0,0 @@ -/* MN10300 Architecture time management specifications - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_TIMEX_H -#define _ASM_TIMEX_H - -#include <asm/hardirq.h> -#include <asm/unit/timex.h> - -#define TICK_SIZE (tick_nsec / 1000) - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set - * to something appropriate, but what? */ - -extern cycles_t cacheflush_time; - -#ifdef __KERNEL__ - -static inline cycles_t get_cycles(void) -{ - return read_timestamp_counter(); -} - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TIMEX_H */ diff --git a/include/asm-mn10300/tlb.h b/include/asm-mn10300/tlb.h deleted file mode 100644 index 65d232b96613..000000000000 --- a/include/asm-mn10300/tlb.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN10300 TLB definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_TLB_H -#define _ASM_TLB_H - -#include <asm/tlbflush.h> - -extern void check_pgt_cache(void); - -/* - * we don't need any special per-pte or per-vma handling... - */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - -/* - * .. because we flush the whole mm when it fills up - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -/* for now, just use the generic stuff */ -#include <asm-generic/tlb.h> - -#endif /* _ASM_TLB_H */ diff --git a/include/asm-mn10300/tlbflush.h b/include/asm-mn10300/tlbflush.h deleted file mode 100644 index e0239865abcb..000000000000 --- a/include/asm-mn10300/tlbflush.h +++ /dev/null @@ -1,80 +0,0 @@ -/* MN10300 TLB flushing functions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_TLBFLUSH_H -#define _ASM_TLBFLUSH_H - -#include <asm/processor.h> - -#define __flush_tlb() \ -do { \ - int w; \ - __asm__ __volatile__ \ - (" mov %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,%1 \n" \ - : "=d"(w) \ - : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \ - : "memory" \ - ); \ -} while (0) - -#define __flush_tlb_all() __flush_tlb() -#define __flush_tlb_one(addr) __flush_tlb() - - -/* - * TLB flushing: - * - * - flush_tlb() flushes the current mm struct TLBs - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(mm, start, end) flushes a range of pages - * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables - */ -#define flush_tlb_all() \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_mm(mm) \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_range(vma, start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - - -#define __flush_tlb_global() flush_tlb_all() -#define flush_tlb() flush_tlb_all() -#define flush_tlb_kernel_range(start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - flush_tlb_all(); \ -} while (0) - -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr); - -#define flush_tlb_pgtables(mm, start, end) do {} while (0) - -#endif /* _ASM_TLBFLUSH_H */ diff --git a/include/asm-mn10300/topology.h b/include/asm-mn10300/topology.h deleted file mode 100644 index 5428f333a02c..000000000000 --- a/include/asm-mn10300/topology.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/topology.h> diff --git a/include/asm-mn10300/types.h b/include/asm-mn10300/types.h deleted file mode 100644 index 7b9f01042fd4..000000000000 --- a/include/asm-mn10300/types.h +++ /dev/null @@ -1,38 +0,0 @@ -/* MN10300 Basic type definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_TYPES_H -#define _ASM_TYPES_H - -#include <asm-generic/int-ll64.h> - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ -typedef u32 dma_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TYPES_H */ diff --git a/include/asm-mn10300/uaccess.h b/include/asm-mn10300/uaccess.h deleted file mode 100644 index 8a3a4dd55763..000000000000 --- a/include/asm-mn10300/uaccess.h +++ /dev/null @@ -1,490 +0,0 @@ -/* MN10300 userspace access functions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UACCESS_H -#define _ASM_UACCESS_H - -/* - * User space memory access functions - */ -#include <linux/sched.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/errno.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF) -#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF) -#define USER_DS MAKE_MM_SEG(TASK_SIZE) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) -#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -#define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * check that a range of addresses falls within the current address limit - */ -static inline int ___range_ok(unsigned long addr, unsigned int size) -{ - int flag = 1, tmp; - - asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */ - " bcs 0f \n" - " cmp %4,%1 \n" /* jump if addr+size>limit (error) */ - " bhi 0f \n" - " clr %0 \n" /* mark okay */ - "0: \n" - : "=r"(flag), "=&r"(tmp) - : "1"(addr), "ir"(size), - "r"(current_thread_info()->addr_limit.seg), "0"(flag) - : "cc" - ); - - return flag; -} - -#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size)) - -#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0) - -static inline int verify_area(int type, const void *addr, unsigned long size) -{ - return access_ok(type, addr, size) ? 0 : -EFAULT; -} - - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern int fixup_exception(struct pt_regs *regs); - -#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) -#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -/* - * The "xxx_ret" versions return constant specified in third argument, if - * something bad happens. These macros can be optimized for the - * case of just returning from the function xxx_ret is used. - */ - -#define put_user_ret(x, ptr, ret) \ - ({ if (put_user((x), (ptr))) return (ret); }) -#define get_user_ret(x, ptr, ret) \ - ({ if (get_user((x), (ptr))) return (ret); }) -#define __put_user_ret(x, ptr, ret) \ - ({ if (__put_user((x), (ptr))) return (ret); }) -#define __get_user_ret(x, ptr, ret) \ - ({ if (__get_user((x), (ptr))) return (ret); }) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - __typeof(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - __typeof__(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - if (likely(__access_ok(__gu_addr,size))) { \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - } \ - else { \ - __gu_err = -EFAULT; \ - __gu_val = 0; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - -#define __get_user_asm(INSN) \ -({ \ - asm volatile( \ - "1:\n" \ - " mov"INSN" %2,%1\n" \ - " mov 0,%0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n\t" \ - " mov %3,%0\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "=&r" (__gu_err), "=&r" (__gu_val) \ - : "m" (__m(__gu_addr)), "i" (-EFAULT)); \ -}) - -extern int __get_user_unknown(void); - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - union { \ - __typeof__(*(ptr)) val; \ - u32 bits[2]; \ - } __pu_val; \ - unsigned long __pu_addr; \ - int __pu_err; \ - __pu_val.val = (x); \ - __pu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: __put_user_asm("bu"); break; \ - case 2: __put_user_asm("hu"); break; \ - case 4: __put_user_asm("" ); break; \ - case 8: __put_user_asm8(); break; \ - default: __pu_err = __put_user_unknown(); break; \ - } \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - union { \ - __typeof__(*(ptr)) val; \ - u32 bits[2]; \ - } __pu_val; \ - unsigned long __pu_addr; \ - int __pu_err; \ - __pu_val.val = (x); \ - __pu_addr = (unsigned long) (ptr); \ - if (likely(__access_ok(__pu_addr, size))) { \ - switch (size) { \ - case 1: __put_user_asm("bu"); break; \ - case 2: __put_user_asm("hu"); break; \ - case 4: __put_user_asm("" ); break; \ - case 8: __put_user_asm8(); break; \ - default: __pu_err = __put_user_unknown(); break; \ - } \ - } \ - else { \ - __pu_err = -EFAULT; \ - } \ - __pu_err; \ -}) - -#define __put_user_asm(INSN) \ -({ \ - asm volatile( \ - "1:\n" \ - " mov"INSN" %1,%2\n" \ - " mov 0,%0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n" \ - " mov %3,%0\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "=&r" (__pu_err) \ - : "r" (__pu_val.val), "m" (__m(__pu_addr)), \ - "i" (-EFAULT) \ - ); \ -}) - -#define __put_user_asm8() \ -({ \ - asm volatile( \ - "1: mov %1,%3 \n" \ - "2: mov %2,%4 \n" \ - " mov 0,%0 \n" \ - "3: \n" \ - " .section .fixup,\"ax\" \n" \ - "4: \n" \ - " mov %5,%0 \n" \ - " jmp 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4 \n" \ - " .long 1b, 4b \n" \ - " .long 2b, 4b \n" \ - " .previous \n" \ - : "=&r" (__pu_err) \ - : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \ - "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \ - "i" (-EFAULT) \ - ); \ -}) - -extern int __put_user_unknown(void); - - -/* - * Copy To/From Userspace - */ -/* Generic arbitrary sized copy. */ -#define __copy_user(to, from, size) \ -do { \ - if (size) { \ - void *__to = to; \ - const void *__from = from; \ - int w; \ - asm volatile( \ - "0: movbu (%0),%3;\n" \ - "1: movbu %3,(%1);\n" \ - " inc %0;\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 0b;\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - " .previous\n" \ - : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ - : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ - } \ -} while (0) - -#define __copy_user_zeroing(to, from, size) \ -do { \ - if (size) { \ - void *__to = to; \ - const void *__from = from; \ - int w; \ - asm volatile( \ - "0: movbu (%0),%3;\n" \ - "1: movbu %3,(%1);\n" \ - " inc %0;\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 0b;\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n" \ - " mov %2,%0\n" \ - " clr %3\n" \ - "4: movbu %3,(%1);\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 4b;\n" \ - " mov %0,%2\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - " .previous\n" \ - : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ - : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ - } \ -} while (0) - -/* We let the __ versions of copy_from/to_user inline, because they're often - * used in fast paths and have only a small space overhead. - */ -static inline -unsigned long __generic_copy_from_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __copy_user_zeroing(to, from, n); - return n; -} - -static inline -unsigned long __generic_copy_to_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __copy_user(to, from, n); - return n; -} - - -#if 0 -#error don't use - these macros don't increment to & from pointers -/* Optimize just a little bit when we know the size of the move. */ -#define __constant_copy_user(to, from, size) \ -do { \ - asm volatile( \ - " mov %0,a0;\n" \ - "0: movbu (%1),d3;\n" \ - "1: movbu d3,(%2);\n" \ - " add -1,a0;\n" \ - " bne 0b;\n" \ - "2:;" \ - ".section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : \ - : "d"(size), "d"(to), "d"(from) \ - : "d3", "a0"); \ -} while (0) - -/* Optimize just a little bit when we know the size of the move. */ -#define __constant_copy_user_zeroing(to, from, size) \ -do { \ - asm volatile( \ - " mov %0,a0;\n" \ - "0: movbu (%1),d3;\n" \ - "1: movbu d3,(%2);\n" \ - " add -1,a0;\n" \ - " bne 0b;\n" \ - "2:;" \ - ".section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : \ - : "d"(size), "d"(to), "d"(from) \ - : "d3", "a0"); \ -} while (0) - -static inline -unsigned long __constant_copy_to_user(void *to, const void *from, - unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - __constant_copy_user(to, from, n); - return n; -} - -static inline -unsigned long __constant_copy_from_user(void *to, const void *from, - unsigned long n) -{ - if (access_ok(VERIFY_READ, from, n)) - __constant_copy_user_zeroing(to, from, n); - return n; -} - -static inline -unsigned long __constant_copy_to_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __constant_copy_user(to, from, n); - return n; -} - -static inline -unsigned long __constant_copy_from_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __constant_copy_user_zeroing(to, from, n); - return n; -} -#endif - -extern unsigned long __generic_copy_to_user(void __user *, const void *, - unsigned long); -extern unsigned long __generic_copy_from_user(void *, const void __user *, - unsigned long); - -#define __copy_to_user_inatomic(to, from, n) \ - __generic_copy_to_user_nocheck((to), (from), (n)) -#define __copy_from_user_inatomic(to, from, n) \ - __generic_copy_from_user_nocheck((to), (from), (n)) - -#define __copy_to_user(to, from, n) \ -({ \ - might_sleep(); \ - __copy_to_user_inatomic((to), (from), (n)); \ -}) - -#define __copy_from_user(to, from, n) \ -({ \ - might_sleep(); \ - __copy_from_user_inatomic((to), (from), (n)); \ -}) - - -#define copy_to_user(to, from, n) __generic_copy_to_user((to), (from), (n)) -#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n)) - -extern long strncpy_from_user(char *dst, const char __user *src, long count); -extern long __strncpy_from_user(char *dst, const char __user *src, long count); -extern long strnlen_user(const char __user *str, long n); -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) -extern unsigned long clear_user(void __user *mem, unsigned long len); -extern unsigned long __clear_user(void __user *mem, unsigned long len); - -#endif /* _ASM_UACCESS_H */ diff --git a/include/asm-mn10300/ucontext.h b/include/asm-mn10300/ucontext.h deleted file mode 100644 index fcab5c1d8e18..000000000000 --- a/include/asm-mn10300/ucontext.h +++ /dev/null @@ -1,22 +0,0 @@ -/* MN10300 User context - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UCONTEXT_H -#define _ASM_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _ASM_UCONTEXT_H */ diff --git a/include/asm-mn10300/unaligned.h b/include/asm-mn10300/unaligned.h deleted file mode 100644 index 0df671318ae4..000000000000 --- a/include/asm-mn10300/unaligned.h +++ /dev/null @@ -1,20 +0,0 @@ -/* MN10300 Unaligned memory access handling - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_MN10300_UNALIGNED_H -#define _ASM_MN10300_UNALIGNED_H - -#include <linux/unaligned/access_ok.h> -#include <linux/unaligned/generic.h> - -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le - -#endif /* _ASM_MN10300_UNALIGNED_H */ diff --git a/include/asm-mn10300/unistd.h b/include/asm-mn10300/unistd.h deleted file mode 100644 index 543a4f98695d..000000000000 --- a/include/asm-mn10300/unistd.h +++ /dev/null @@ -1,390 +0,0 @@ -/* MN10300 System call number list - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNISTD_H -#define _ASM_UNISTD_H - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86old 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_vm86 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_madvise1 219 /* delete when C lib stub is removed */ -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -/* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_cacheflush 289 -#define __NR_ioprio_set 290 -#define __NR_ioprio_get 291 -#define __NR_inotify_init 292 -#define __NR_inotify_add_watch 293 -#define __NR_inotify_rm_watch 294 -#define __NR_migrate_pages 295 -#define __NR_openat 296 -#define __NR_mkdirat 297 -#define __NR_mknodat 298 -#define __NR_fchownat 299 -#define __NR_futimesat 300 -#define __NR_fstatat64 301 -#define __NR_unlinkat 302 -#define __NR_renameat 303 -#define __NR_linkat 304 -#define __NR_symlinkat 305 -#define __NR_readlinkat 306 -#define __NR_fchmodat 307 -#define __NR_faccessat 308 -#define __NR_pselect6 309 -#define __NR_ppoll 310 -#define __NR_unshare 311 -#define __NR_set_robust_list 312 -#define __NR_get_robust_list 313 -#define __NR_splice 314 -#define __NR_sync_file_range 315 -#define __NR_tee 316 -#define __NR_vmsplice 317 -#define __NR_move_pages 318 -#define __NR_getcpu 319 -#define __NR_epoll_pwait 320 -#define __NR_utimensat 321 -#define __NR_signalfd 322 -#define __NR_timerfd_create 323 -#define __NR_eventfd 324 -#define __NR_fallocate 325 -#define __NR_timerfd_settime 326 -#define __NR_timerfd_gettime 327 -#define __NR_signalfd4 328 -#define __NR_eventfd2 329 -#define __NR_epoll_create1 330 -#define __NR_dup3 331 -#define __NR_pipe2 332 -#define __NR_inotify_init1 333 - -#ifdef __KERNEL__ - -#define NR_syscalls 326 - -/* - * specify the deprecated syscalls we want to support on this arch - */ -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_UNISTD_H */ diff --git a/include/asm-mn10300/unit-asb2303/clock.h b/include/asm-mn10300/unit-asb2303/clock.h deleted file mode 100644 index 8b450e920af1..000000000000 --- a/include/asm-mn10300/unit-asb2303/clock.h +++ /dev/null @@ -1,45 +0,0 @@ -/* ASB2303-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_CLOCK_H -#define _ASM_UNIT_CLOCK_H - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ - -#else /* !CONFIG_MN10300_RTC */ - -#define MN10300_IOCLK 33333333UL -/* #define MN10300_IOBCLK 66666666UL */ - -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/include/asm-mn10300/unit-asb2303/leds.h b/include/asm-mn10300/unit-asb2303/leds.h deleted file mode 100644 index 3a7543ea7b5c..000000000000 --- a/include/asm-mn10300/unit-asb2303/leds.h +++ /dev/null @@ -1,43 +0,0 @@ -/* ASB2303-specific LEDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_LEDS_H -#define _ASM_UNIT_LEDS_H - -#include <asm/pio-regs.h> -#include <asm/cpu-regs.h> -#include <asm/exceptions.h> - -#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32) -#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32) - -/* - * use the 7-segment LEDs to indicate states - */ - -/* flip the 7-segment LEDs between "G" and "-" */ -#define mn10300_set_gdbleds(ONOFF) \ -do { \ - ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \ -} while (0) - -/* indicate double-fault by displaying "d" on the LEDs */ -#define mn10300_set_dbfleds \ - mov 0x43,d0 ; \ - movbu d0,(ASB2303_7SEGLEDS) - -#ifndef __ASSEMBLY__ -extern void peripheral_leds_display_exception(enum exception_code code); -extern void peripheral_leds_led_chase(void); -extern void debug_to_serial(const char *p, int n); -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UNIT_LEDS_H */ diff --git a/include/asm-mn10300/unit-asb2303/serial.h b/include/asm-mn10300/unit-asb2303/serial.h deleted file mode 100644 index 0d55cf5896ac..000000000000 --- a/include/asm-mn10300/unit-asb2303/serial.h +++ /dev/null @@ -1,136 +0,0 @@ -/* ASB2303-specific 8250 serial ports - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include <asm/cpu-regs.h> -#include <asm/proc/irq.h> -#include <linux/serial_reg.h> - -#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 -#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000 - -#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ - -/* - * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ -#endif - -#ifndef __ASSEMBLY__ - -#define LSR_WAIT_FOR(STATE) \ -do { \ - while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \ -} while (0) -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \ -} while (0) -#define FLOWCTL_CLEAR(LINE) \ -do { \ - GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_SET(LINE) \ -do { \ - GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - GDBPORT_SERIAL_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - GDBPORT_SERIAL_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/include/asm-mn10300/unit-asb2303/smc91111.h b/include/asm-mn10300/unit-asb2303/smc91111.h deleted file mode 100644 index dd456e9c513f..000000000000 --- a/include/asm-mn10300/unit-asb2303/smc91111.h +++ /dev/null @@ -1,50 +0,0 @@ -/* Support for the SMC91C111 NIC on an ASB2303 - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SMC91111_H -#define _ASM_UNIT_SMC91111_H - -#include <asm/intctl-regs.h> - -#define SMC91111_BASE 0xAA000300UL -#define SMC91111_BASE_END 0xAA000400UL -#define SMC91111_IRQ XIRQ3 - -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_NOWAIT 1 -#define SMC_IRQ_FLAGS (0) - -#if SMC_CAN_USE_8BIT -#define SMC_inb(a, r) inb((unsigned long) ((a) + (r))) -#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r))) -#endif - -#if SMC_CAN_USE_16BIT -#define SMC_inw(a, r) inw((unsigned long) ((a) + (r))) -#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r))) -#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l)) -#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l)) -#endif - -#if SMC_CAN_USE_32BIT -#define SMC_inl(a, r) inl((unsigned long) ((a) + (r))) -#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r))) -#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l)) -#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l)) -#endif - -#define RPC_LSA_DEFAULT RPC_LED_100_10 -#define RPC_LSB_DEFAULT RPC_LED_TX_RX - -#define set_irq_type(irq, type) - -#endif /* _ASM_UNIT_SMC91111_H */ diff --git a/include/asm-mn10300/unit-asb2303/timex.h b/include/asm-mn10300/unit-asb2303/timex.h deleted file mode 100644 index 7e54b0cfdd03..000000000000 --- a/include/asm-mn10300/unit-asb2303/timex.h +++ /dev/null @@ -1,135 +0,0 @@ -/* ASB2303-specific timer specifcations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_TIMEX_H -#define _ASM_UNIT_TIMEX_H - -#ifndef __ASSEMBLY__ -#include <linux/irq.h> -#endif /* __ASSEMBLY__ */ - -#include <asm/timer-regs.h> -#include <asm/unit/clock.h> - -/* - * jiffies counter specifications - */ - -#define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR -#define TMJCIRQ TM1IRQ -#define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 - -#ifndef __ASSEMBLY__ - -static inline void startup_jiffies_counter(void) -{ - unsigned rate; - u16 md, t16; - - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - if (rate > TMJCBR_MAX) - BUG(); - } - } - - TMJCBR = rate - 1; - t16 = TMJCBR; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; - - t16 = TMJCMD; - - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} - -static inline void shutdown_jiffies_counter(void) -{ -} - -#endif /* !__ASSEMBLY__ */ - - -/* - * timestamp counter specifications - */ - -#define TMTSCBR_MAX 0xffffffff -#define TMTSCBC TM45BC - -#ifndef __ASSEMBLY__ - -static inline void startup_timestamp_counter(void) -{ - /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time - * - count down from 4Gig-1 to 0 and wrap at IOCLK rate - */ - TM45BR = TMTSCBR_MAX; - - TM4MD = TM4MD_SRC_IOCLK; - TM4MD |= TM4MD_INIT_COUNTER; - TM4MD &= ~TM4MD_INIT_COUNTER; - TM4ICR = 0; - - TM5MD = TM5MD_SRC_TM4CASCADE; - TM5MD |= TM5MD_INIT_COUNTER; - TM5MD &= ~TM5MD_INIT_COUNTER; - TM5ICR = 0; - - TM5MD |= TM5MD_COUNT_ENABLE; - TM4MD |= TM4MD_COUNT_ENABLE; -} - -static inline void shutdown_timestamp_counter(void) -{ - TM4MD = 0; - TM5MD = 0; -} - -/* - * we use a cascaded pair of 16-bit down-counting timers to count I/O - * clock cycles for the purposes of time keeping - */ -typedef unsigned long cycles_t; - -static inline cycles_t read_timestamp_counter(void) -{ - return (cycles_t)TMTSCBC; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/include/asm-mn10300/unit-asb2305/clock.h b/include/asm-mn10300/unit-asb2305/clock.h deleted file mode 100644 index 7d514841ffda..000000000000 --- a/include/asm-mn10300/unit-asb2305/clock.h +++ /dev/null @@ -1,45 +0,0 @@ -/* ASB2305-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_CLOCK_H -#define _ASM_UNIT_CLOCK_H - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ - -#else /* !CONFIG_MN10300_RTC */ - -#define MN10300_IOCLK 33333333UL -/* #define MN10300_IOBCLK 66666666UL */ - -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/include/asm-mn10300/unit-asb2305/leds.h b/include/asm-mn10300/unit-asb2305/leds.h deleted file mode 100644 index bc471f617fd1..000000000000 --- a/include/asm-mn10300/unit-asb2305/leds.h +++ /dev/null @@ -1,51 +0,0 @@ -/* ASB2305-specific LEDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_LEDS_H -#define _ASM_UNIT_LEDS_H - -#include <asm/pio-regs.h> -#include <asm/cpu-regs.h> -#include <asm/exceptions.h> - -#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32) - -/* perform a hard reset by driving PIO06 low */ -#define mn10300_unit_hard_reset() \ -do { \ - P0OUT &= 0xbf; \ - P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \ -} while (0) - -/* - * use the 7-segment LEDs to indicate states - */ -/* indicate double-fault by displaying "db-f" on the LEDs */ -#define mn10300_set_dbfleds \ - mov 0x43077f1d,d0 ; \ - mov d0,(ASB2305_7SEGLEDS) - -/* flip the 7-segment LEDs between "Gdb-" and "----" */ -#define mn10300_set_gdbleds(ONOFF) \ -do { \ - ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ -} while (0) - -#ifndef __ASSEMBLY__ -extern void peripheral_leds_display_exception(enum exception_code); -extern void peripheral_leds_led_chase(void); -extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_rtc(void); -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UNIT_LEDS_H */ diff --git a/include/asm-mn10300/unit-asb2305/serial.h b/include/asm-mn10300/unit-asb2305/serial.h deleted file mode 100644 index 73d31d67bb71..000000000000 --- a/include/asm-mn10300/unit-asb2305/serial.h +++ /dev/null @@ -1,120 +0,0 @@ -/* ASB2305-specific 8250 serial ports - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include <asm/cpu/cpu-regs.h> -#include <asm/proc/irq.h> -#include <linux/serial_reg.h> - -#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 -#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) - -#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ - -/* - * dispose of the /dev/ttyS0 serial port - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#error The ASB2305 doesnt have a /dev/ttyS1 -#endif - -#ifndef __ASSEMBLY__ - -#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) - -#define LSR_WAIT_FOR(STATE) \ -do { \ - while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ -} while (0) -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ -} while (0) -#define FLOWCTL_CLEAR(LINE) \ -do { \ - TTYS0_MCR &= ~UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_SET(LINE) \ -do { \ - TTYS0_MCR |= UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - TTYS0_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - TTYS0_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/include/asm-mn10300/unit-asb2305/timex.h b/include/asm-mn10300/unit-asb2305/timex.h deleted file mode 100644 index 10e1bfe34463..000000000000 --- a/include/asm-mn10300/unit-asb2305/timex.h +++ /dev/null @@ -1,135 +0,0 @@ -/* ASB2305 timer specifcations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_TIMEX_H -#define _ASM_UNIT_TIMEX_H - -#ifndef __ASSEMBLY__ -#include <linux/irq.h> -#endif /* __ASSEMBLY__ */ - -#include <asm/cpu/timer-regs.h> -#include <asm/unit/clock.h> - -/* - * jiffies counter specifications - */ - -#define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR -#define TMJCIRQ TM1IRQ -#define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 - -#ifndef __ASSEMBLY__ - -static inline void startup_jiffies_counter(void) -{ - unsigned rate; - u16 md, t16; - - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - if (rate > TMJCBR_MAX) - BUG(); - } - } - - TMJCBR = rate - 1; - t16 = TMJCBR; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; - - t16 = TMJCMD; - - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} - -static inline void shutdown_jiffies_counter(void) -{ -} - -#endif /* !__ASSEMBLY__ */ - - -/* - * timestamp counter specifications - */ - -#define TMTSCBR_MAX 0xffffffff -#define TMTSCBC TM45BC - -#ifndef __ASSEMBLY__ - -static inline void startup_timestamp_counter(void) -{ - /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time - * - count down from 4Gig-1 to 0 and wrap at IOCLK rate - */ - TM45BR = TMTSCBR_MAX; - - TM4MD = TM4MD_SRC_IOCLK; - TM4MD |= TM4MD_INIT_COUNTER; - TM4MD &= ~TM4MD_INIT_COUNTER; - TM4ICR = 0; - - TM5MD = TM5MD_SRC_TM4CASCADE; - TM5MD |= TM5MD_INIT_COUNTER; - TM5MD &= ~TM5MD_INIT_COUNTER; - TM5ICR = 0; - - TM5MD |= TM5MD_COUNT_ENABLE; - TM4MD |= TM4MD_COUNT_ENABLE; -} - -static inline void shutdown_timestamp_counter(void) -{ - TM4MD = 0; - TM5MD = 0; -} - -/* - * we use a cascaded pair of 16-bit down-counting timers to count I/O - * clock cycles for the purposes of time keeping - */ -typedef unsigned long cycles_t; - -static inline cycles_t read_timestamp_counter(void) -{ - return (cycles_t) TMTSCBC; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/include/asm-mn10300/user.h b/include/asm-mn10300/user.h deleted file mode 100644 index e1193908b78c..000000000000 --- a/include/asm-mn10300/user.h +++ /dev/null @@ -1,53 +0,0 @@ -/* MN10300 User process data - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_USER_H -#define _ASM_USER_H - -#include <asm/page.h> -#include <linux/ptrace.h> - -#ifndef __ASSEMBLY__ -/* - * When the kernel dumps core, it starts by dumping the user struct - this will - * be used by gdb to figure out where the data and stack segments are within - * the file, and what virtual addresses to use. - */ -struct user { - /* We start with the registers, to mimic the way that "memory" is - * returned from the ptrace(3,...) function. - */ - struct pt_regs regs; /* Where the registers are actually stored */ - - /* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - int reserved; /* No longer used */ - struct user_pt_regs *u_ar0; /* Used by gdb to help find the values for */ - - /* the registers */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; -#endif - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR +(u.start_code) -#define HOST_STACK_END_ADDR +(u.start_stack + u.u_ssize * NBPG) - -#endif /* _ASM_USER_H */ diff --git a/include/asm-mn10300/vga.h b/include/asm-mn10300/vga.h deleted file mode 100644 index 0163e50a3459..000000000000 --- a/include/asm-mn10300/vga.h +++ /dev/null @@ -1,17 +0,0 @@ -/* MN10300 VGA register definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_VGA_H -#define _ASM_VGA_H - - - -#endif /* _ASM_VGA_H */ diff --git a/include/asm-mn10300/xor.h b/include/asm-mn10300/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/include/asm-mn10300/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/xor.h> |