summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/blacklist.c16
-rw-r--r--drivers/acpi/glue.c40
-rw-r--r--drivers/acpi/osl.c25
-rw-r--r--drivers/acpi/pci_bind.c313
-rw-r--r--drivers/acpi/pci_irq.c17
-rw-r--r--drivers/acpi/pci_root.c297
-rw-r--r--drivers/acpi/power.c28
-rw-r--r--drivers/acpi/processor_core.c45
-rw-r--r--drivers/acpi/processor_idle.c47
-rw-r--r--drivers/acpi/scan.c69
-rw-r--r--drivers/acpi/video.c61
-rw-r--r--drivers/acpi/video_detect.c9
-rw-r--r--drivers/gpu/drm/i915/i915_opregion.c2
-rw-r--r--drivers/pci/hotplug/acpi_pcihp.c40
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c27
-rw-r--r--drivers/platform/x86/Kconfig17
-rw-r--r--drivers/platform/x86/Makefile1
-rw-r--r--drivers/platform/x86/acerhdf.c602
-rw-r--r--drivers/platform/x86/dell-wmi.c56
-rw-r--r--drivers/platform/x86/hp-wmi.c87
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c411
-rw-r--r--drivers/pnp/pnpacpi/rsparser.c46
22 files changed, 1535 insertions, 721 deletions
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 09c69806c1fc..f6baa77deefb 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -192,6 +192,22 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+ {
+ .callback = dmi_disable_osi_vista,
+ .ident = "Sony VGN-NS10J_S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS10J_S"),
+ },
+ },
+ {
+ .callback = dmi_disable_osi_vista,
+ .ident = "Sony VGN-SR290J",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"),
+ },
+ },
/*
* BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 8bd2c2a6884d..a8a5c29958c8 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -140,46 +140,6 @@ struct device *acpi_get_physical_device(acpi_handle handle)
EXPORT_SYMBOL(acpi_get_physical_device);
-/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge
- * This should work in general, but did not on a Lenovo T61 for the
- * graphics card. But this must be fixed when the PCI device is
- * bound and the kernel device struct is attached to the acpi device
- * Note: A success call will increase reference count by one
- * Do call put_device(dev) on the returned device then
- */
-struct device *acpi_get_physical_pci_device(acpi_handle handle)
-{
- struct device *dev;
- long long device_id;
- acpi_status status;
-
- status =
- acpi_evaluate_integer(handle, "_ADR", NULL, &device_id);
-
- if (ACPI_FAILURE(status))
- return NULL;
-
- /* We need to attempt to determine whether the _ADR refers to a
- PCI device or not. There's no terribly good way to do this,
- so the best we can hope for is to assume that there'll never
- be a device in the host bridge */
- if (device_id >= 0x10000) {
- /* It looks like a PCI device. Does it exist? */
- dev = acpi_get_physical_device(handle);
- } else {
- /* It doesn't look like a PCI device. Does its parent
- exist? */
- acpi_handle phandle;
- if (acpi_get_parent(handle, &phandle))
- return NULL;
- dev = acpi_get_physical_device(phandle);
- }
- if (!dev)
- return NULL;
- return dev;
-}
-EXPORT_SYMBOL(acpi_get_physical_pci_device);
-
static int acpi_bind_one(struct device *dev, acpi_handle handle)
{
struct acpi_device *acpi_dev;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index d916bea729f1..71670719d61a 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -79,6 +79,7 @@ static acpi_osd_handler acpi_irq_handler;
static void *acpi_irq_context;
static struct workqueue_struct *kacpid_wq;
static struct workqueue_struct *kacpi_notify_wq;
+static struct workqueue_struct *kacpi_hotplug_wq;
struct acpi_res_list {
resource_size_t start;
@@ -192,8 +193,10 @@ acpi_status acpi_os_initialize1(void)
{
kacpid_wq = create_singlethread_workqueue("kacpid");
kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
+ kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
BUG_ON(!kacpid_wq);
BUG_ON(!kacpi_notify_wq);
+ BUG_ON(!kacpi_hotplug_wq);
return AE_OK;
}
@@ -206,6 +209,7 @@ acpi_status acpi_os_terminate(void)
destroy_workqueue(kacpid_wq);
destroy_workqueue(kacpi_notify_wq);
+ destroy_workqueue(kacpi_hotplug_wq);
return AE_OK;
}
@@ -716,6 +720,7 @@ static acpi_status __acpi_os_execute(acpi_execute_type type,
acpi_status status = AE_OK;
struct acpi_os_dpc *dpc;
struct workqueue_struct *queue;
+ work_func_t func;
int ret;
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Scheduling function [%p(%p)] for deferred execution.\n",
@@ -740,15 +745,17 @@ static acpi_status __acpi_os_execute(acpi_execute_type type,
dpc->function = function;
dpc->context = context;
- if (!hp) {
- INIT_WORK(&dpc->work, acpi_os_execute_deferred);
- queue = (type == OSL_NOTIFY_HANDLER) ?
- kacpi_notify_wq : kacpid_wq;
- ret = queue_work(queue, &dpc->work);
- } else {
- INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred);
- ret = schedule_work(&dpc->work);
- }
+ /*
+ * We can't run hotplug code in keventd_wq/kacpid_wq/kacpid_notify_wq
+ * because the hotplug code may call driver .remove() functions,
+ * which invoke flush_scheduled_work/acpi_os_wait_events_complete
+ * to flush these workqueues.
+ */
+ queue = hp ? kacpi_hotplug_wq :
+ (type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
+ func = hp ? acpi_os_execute_hp_deferred : acpi_os_execute_deferred;
+ INIT_WORK(&dpc->work, func);
+ ret = queue_work(queue, &dpc->work);
if (!ret) {
printk(KERN_ERR PREFIX
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
index bc46de3d967f..a5a77b78a723 100644
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -24,12 +24,7 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
@@ -38,310 +33,76 @@
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_bind");
-struct acpi_pci_data {
- struct acpi_pci_id id;
- struct pci_bus *bus;
- struct pci_dev *dev;
-};
-
-static int acpi_pci_unbind(struct acpi_device *device);
-
-static void acpi_pci_data_handler(acpi_handle handle, u32 function,
- void *context)
-{
-
- /* TBD: Anything we need to do here? */
-
- return;
-}
-
-/**
- * acpi_get_pci_id
- * ------------------
- * This function is used by the ACPI Interpreter (a.k.a. Core Subsystem)
- * to resolve PCI information for ACPI-PCI devices defined in the namespace.
- * This typically occurs when resolving PCI operation region information.
- */
-acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id)
+static int acpi_pci_unbind(struct acpi_device *device)
{
- int result = 0;
- acpi_status status = AE_OK;
- struct acpi_device *device = NULL;
- struct acpi_pci_data *data = NULL;
-
-
- if (!id)
- return AE_BAD_PARAMETER;
-
- result = acpi_bus_get_device(handle, &device);
- if (result) {
- printk(KERN_ERR PREFIX
- "Invalid ACPI Bus context for device %s\n",
- acpi_device_bid(device));
- return AE_NOT_EXIST;
- }
-
- status = acpi_get_data(handle, acpi_pci_data_handler, (void **)&data);
- if (ACPI_FAILURE(status) || !data) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Invalid ACPI-PCI context for device %s",
- acpi_device_bid(device)));
- return status;
- }
+ struct pci_dev *dev;
- *id = data->id;
+ dev = acpi_get_pci_dev(device->handle);
+ if (!dev || !dev->subordinate)
+ goto out;
- /*
- id->segment = data->id.segment;
- id->bus = data->id.bus;
- id->device = data->id.device;
- id->function = data->id.function;
- */
+ acpi_pci_irq_del_prt(dev->subordinate);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device %s has PCI address %04x:%02x:%02x.%d\n",
- acpi_device_bid(device), id->segment, id->bus,
- id->device, id->function));
+ device->ops.bind = NULL;
+ device->ops.unbind = NULL;
- return AE_OK;
+out:
+ pci_dev_put(dev);
+ return 0;
}
-EXPORT_SYMBOL(acpi_get_pci_id);
-
-int acpi_pci_bind(struct acpi_device *device)
+static int acpi_pci_bind(struct acpi_device *device)
{
- int result = 0;
acpi_status status;
- struct acpi_pci_data *data;
- struct acpi_pci_data *pdata;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_handle handle;
+ struct pci_bus *bus;
+ struct pci_dev *dev;
- if (!device || !device->parent)
- return -EINVAL;
-
- data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
- if (ACPI_FAILURE(status)) {
- kfree(data);
- return -ENODEV;
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI device [%s]...\n",
- (char *)buffer.pointer));
-
- /*
- * Segment & Bus
- * -------------
- * These are obtained via the parent device's ACPI-PCI context.
- */
- status = acpi_get_data(device->parent->handle, acpi_pci_data_handler,
- (void **)&pdata);
- if (ACPI_FAILURE(status) || !pdata || !pdata->bus) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Invalid ACPI-PCI context for parent device %s",
- acpi_device_bid(device->parent)));
- result = -ENODEV;
- goto end;
- }
- data->id.segment = pdata->id.segment;
- data->id.bus = pdata->bus->number;
-
- /*
- * Device & Function
- * -----------------
- * These are simply obtained from the device's _ADR method. Note
- * that a value of zero is valid.
- */
- data->id.device = device->pnp.bus_address >> 16;
- data->id.function = device->pnp.bus_address & 0xFFFF;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "...to %04x:%02x:%02x.%d\n",
- data->id.segment, data->id.bus, data->id.device,
- data->id.function));
-
- /*
- * TBD: Support slot devices (e.g. function=0xFFFF).
- */
-
- /*
- * Locate PCI Device
- * -----------------
- * Locate matching device in PCI namespace. If it doesn't exist
- * this typically means that the device isn't currently inserted
- * (e.g. docking station, port replicator, etc.).
- */
- data->dev = pci_get_slot(pdata->bus,
- PCI_DEVFN(data->id.device, data->id.function));
- if (!data->dev) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device %04x:%02x:%02x.%d not present in PCI namespace\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function));
- result = -ENODEV;
- goto end;
- }
- if (!data->dev->bus) {
- printk(KERN_ERR PREFIX
- "Device %04x:%02x:%02x.%d has invalid 'bus' field\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function);
- result = -ENODEV;
- goto end;
- }
+ dev = acpi_get_pci_dev(device->handle);
+ if (!dev)
+ return 0;
/*
- * PCI Bridge?
- * -----------
- * If so, set the 'bus' field and install the 'bind' function to
- * facilitate callbacks for all of its children.
+ * Install the 'bind' function to facilitate callbacks for
+ * children of the P2P bridge.
*/
- if (data->dev->subordinate) {
+ if (dev->subordinate) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d is a PCI bridge\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function));
- data->bus = data->dev->subordinate;
+ pci_domain_nr(dev->bus), dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)));
device->ops.bind = acpi_pci_bind;
device->ops.unbind = acpi_pci_unbind;
}
/*
- * Attach ACPI-PCI Context
- * -----------------------
- * Thus binding the ACPI and PCI devices.
- */
- status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to attach ACPI-PCI context to device %s",
- acpi_device_bid(device)));
- result = -ENODEV;
- goto end;
- }
-
- /*
- * PCI Routing Table
- * -----------------
- * Evaluate and parse _PRT, if exists. This code is independent of
- * PCI bridges (above) to allow parsing of _PRT objects within the
- * scope of non-bridge devices. Note that _PRTs within the scope of
- * a PCI bridge assume the bridge's subordinate bus number.
+ * Evaluate and parse _PRT, if exists. This code allows parsing of
+ * _PRT objects within the scope of non-bridge devices. Note that
+ * _PRTs within the scope of a PCI bridge assume the bridge's
+ * subordinate bus number.
*
* TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
*/
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
- if (ACPI_SUCCESS(status)) {
- if (data->bus) /* PCI-PCI bridge */
- acpi_pci_irq_add_prt(device->handle, data->id.segment,
- data->bus->number);
- else /* non-bridge PCI device */
- acpi_pci_irq_add_prt(device->handle, data->id.segment,
- data->id.bus);
- }
-
- end:
- kfree(buffer.pointer);
- if (result) {
- pci_dev_put(data->dev);
- kfree(data);
- }
- return result;
-}
-
-static int acpi_pci_unbind(struct acpi_device *device)
-{
- int result = 0;
- acpi_status status;
- struct acpi_pci_data *data;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
-
- if (!device || !device->parent)
- return -EINVAL;
-
- status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ goto out;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unbinding PCI device [%s]...\n",
- (char *) buffer.pointer));
- kfree(buffer.pointer);
+ if (dev->subordinate)
+ bus = dev->subordinate;
+ else
+ bus = dev->bus;
- status =
- acpi_get_data(device->handle, acpi_pci_data_handler,
- (void **)&data);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
+ acpi_pci_irq_add_prt(device->handle, bus);
- status = acpi_detach_data(device->handle, acpi_pci_data_handler);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to detach data from device %s",
- acpi_device_bid(device)));
- result = -ENODEV;
- goto end;
- }
- if (data->dev->subordinate) {
- acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
- }
- pci_dev_put(data->dev);
- kfree(data);
-
- end:
- return result;
+out:
+ pci_dev_put(dev);
+ return 0;
}
-int
-acpi_pci_bind_root(struct acpi_device *device,
- struct acpi_pci_id *id, struct pci_bus *bus)
+int acpi_pci_bind_root(struct acpi_device *device)
{
- int result = 0;
- acpi_status status;
- struct acpi_pci_data *data = NULL;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
- if (!device || !id || !bus) {
- return -EINVAL;
- }
-
- data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->id = *id;
- data->bus = bus;
device->ops.bind = acpi_pci_bind;
device->ops.unbind = acpi_pci_unbind;
- status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
- if (ACPI_FAILURE(status)) {
- kfree (data);
- return -ENODEV;
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI root bridge [%s] to "
- "%04x:%02x\n", (char *)buffer.pointer,
- id->segment, id->bus));
-
- status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to attach ACPI-PCI context to device %s",
- (char *)buffer.pointer));
- result = -ENODEV;
- goto end;
- }
-
- end:
- kfree(buffer.pointer);
- if (result != 0)
- kfree(data);
-
- return result;
+ return 0;
}
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 2faa9e2ac893..b794eb88ab90 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -182,7 +182,7 @@ static void do_prt_fixups(struct acpi_prt_entry *entry,
}
}
-static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus,
+static int acpi_pci_irq_add_entry(acpi_handle handle, struct pci_bus *bus,
struct acpi_pci_routing_table *prt)
{
struct acpi_prt_entry *entry;
@@ -196,8 +196,8 @@ static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus,
* 1=INTA, 2=INTB. We use the PCI encoding throughout, so convert
* it here.
*/
- entry->id.segment = segment;
- entry->id.bus = bus;
+ entry->id.segment = pci_domain_nr(bus);
+ entry->id.bus = bus->number;
entry->id.device = (prt->address >> 16) & 0xFFFF;
entry->pin = prt->pin + 1;
@@ -242,7 +242,7 @@ static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus,
return 0;
}
-int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
+int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus)
{
acpi_status status;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -271,7 +271,7 @@ int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
entry = buffer.pointer;
while (entry && (entry->length > 0)) {
- acpi_pci_irq_add_entry(handle, segment, bus, entry);
+ acpi_pci_irq_add_entry(handle, bus, entry);
entry = (struct acpi_pci_routing_table *)
((unsigned long)entry + entry->length);
}
@@ -280,16 +280,17 @@ int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
return 0;
}
-void acpi_pci_irq_del_prt(int segment, int bus)
+void acpi_pci_irq_del_prt(struct pci_bus *bus)
{
struct acpi_prt_entry *entry, *tmp;
printk(KERN_DEBUG
"ACPI: Delete PCI Interrupt Routing Table for %04x:%02x\n",
- segment, bus);
+ pci_domain_nr(bus), bus->number);
spin_lock(&acpi_prt_lock);
list_for_each_entry_safe(entry, tmp, &acpi_prt_list, list) {
- if (segment == entry->id.segment && bus == entry->id.bus) {
+ if (pci_domain_nr(bus) == entry->id.segment
+ && bus->number == entry->id.bus) {
list_del(&entry->list);
kfree(entry);
}
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 196f97d00956..8a5bf3b356fa 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -63,9 +63,10 @@ static struct acpi_driver acpi_pci_root_driver = {
struct acpi_pci_root {
struct list_head node;
- struct acpi_device * device;
- struct acpi_pci_id id;
+ struct acpi_device *device;
struct pci_bus *bus;
+ u16 segment;
+ u8 bus_nr;
u32 osc_support_set; /* _OSC state of support bits */
u32 osc_control_set; /* _OSC state of control bits */
@@ -82,7 +83,7 @@ static DEFINE_MUTEX(osc_lock);
int acpi_pci_register_driver(struct acpi_pci_driver *driver)
{
int n = 0;
- struct list_head *entry;
+ struct acpi_pci_root *root;
struct acpi_pci_driver **pptr = &sub_driver;
while (*pptr)
@@ -92,9 +93,7 @@ int acpi_pci_register_driver(struct acpi_pci_driver *driver)
if (!driver->add)
return 0;
- list_for_each(entry, &acpi_pci_roots) {
- struct acpi_pci_root *root;
- root = list_entry(entry, struct acpi_pci_root, node);
+ list_for_each_entry(root, &acpi_pci_roots, node) {
driver->add(root->device->handle);
n++;
}
@@ -106,7 +105,7 @@ EXPORT_SYMBOL(acpi_pci_register_driver);
void acpi_pci_unregister_driver(struct acpi_pci_driver *driver)
{
- struct list_head *entry;
+ struct acpi_pci_root *root;
struct acpi_pci_driver **pptr = &sub_driver;
while (*pptr) {
@@ -120,28 +119,48 @@ void acpi_pci_unregister_driver(struct acpi_pci_driver *driver)
if (!driver->remove)
return;
- list_for_each(entry, &acpi_pci_roots) {
- struct acpi_pci_root *root;
- root = list_entry(entry, struct acpi_pci_root, node);
+ list_for_each_entry(root, &acpi_pci_roots, node)
driver->remove(root->device->handle);
- }
}
EXPORT_SYMBOL(acpi_pci_unregister_driver);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int seg, unsigned int bus)
{
- struct acpi_pci_root *tmp;
+ struct acpi_pci_root *root;
- list_for_each_entry(tmp, &acpi_pci_roots, node) {
- if ((tmp->id.segment == (u16) seg) && (tmp->id.bus == (u16) bus))
- return tmp->device->handle;
- }
+ list_for_each_entry(root, &acpi_pci_roots, node)
+ if ((root->segment == (u16) seg) && (root->bus_nr == (u16) bus))
+ return root->device->handle;
return NULL;
}
EXPORT_SYMBOL_GPL(acpi_get_pci_rootbridge_handle);
+/**
+ * acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
+ * @handle - the ACPI CA node in question.
+ *
+ * Note: we could make this API take a struct acpi_device * instead, but
+ * for now, it's more convenient to operate on an acpi_handle.
+ */
+int acpi_is_root_bridge(acpi_handle handle)
+{
+ int ret;
+ struct acpi_device *device;
+
+ ret = acpi_bus_get_device(handle, &device);
+ if (ret)
+ return 0;
+
+ ret = acpi_match_device_ids(device, root_device_ids);
+ if (ret)
+ return 0;
+ else
+ return 1;
+}
+EXPORT_SYMBOL_GPL(acpi_is_root_bridge);
+
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
@@ -161,19 +180,22 @@ get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
return AE_OK;
}
-static acpi_status try_get_root_bridge_busnr(acpi_handle handle, int *busnum)
+static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
+ unsigned long long *bus)
{
acpi_status status;
+ int busnum;
- *busnum = -1;
+ busnum = -1;
status =
acpi_walk_resources(handle, METHOD_NAME__CRS,
- get_root_bridge_busnr_callback, busnum);
+ get_root_bridge_busnr_callback, &busnum);
if (ACPI_FAILURE(status))
return status;
/* Check if we really get a bus number from _CRS */
- if (*busnum == -1)
+ if (busnum == -1)
return AE_ERROR;
+ *bus = busnum;
return AE_OK;
}
@@ -298,6 +320,7 @@ static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags)
static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
{
struct acpi_pci_root *root;
+
list_for_each_entry(root, &acpi_pci_roots, node) {
if (root->device->handle == handle)
return root;
@@ -305,6 +328,87 @@ static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
return NULL;
}
+struct acpi_handle_node {
+ struct list_head node;
+ acpi_handle handle;
+};
+
+/**
+ * acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev
+ * @handle: the handle in question
+ *
+ * Given an ACPI CA handle, the desired PCI device is located in the
+ * list of PCI devices.
+ *
+ * If the device is found, its reference count is increased and this
+ * function returns a pointer to its data structure. The caller must
+ * decrement the reference count by calling pci_dev_put().
+ * If no device is found, %NULL is returned.
+ */
+struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
+{
+ int dev, fn;
+ unsigned long long adr;
+ acpi_status status;
+ acpi_handle phandle;
+ struct pci_bus *pbus;
+ struct pci_dev *pdev = NULL;
+ struct acpi_handle_node *node, *tmp;
+ struct acpi_pci_root *root;
+ LIST_HEAD(device_list);
+
+ /*
+ * Walk up the ACPI CA namespace until we reach a PCI root bridge.
+ */
+ phandle = handle;
+ while (!acpi_is_root_bridge(phandle)) {
+ node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL);
+ if (!node)
+ goto out;
+
+ INIT_LIST_HEAD(&node->node);
+ node->handle = phandle;
+ list_add(&node->node, &device_list);
+
+ status = acpi_get_parent(phandle, &phandle);
+ if (ACPI_FAILURE(status))
+ goto out;
+ }
+
+ root = acpi_pci_find_root(phandle);
+ if (!root)
+ goto out;
+
+ pbus = root->bus;
+
+ /*
+ * Now, walk back down the PCI device tree until we return to our
+ * original handle. Assumes that everything between the PCI root
+ * bridge and the device we're looking for must be a P2P bridge.
+ */
+ list_for_each_entry(node, &device_list, node) {
+ acpi_handle hnd = node->handle;
+ status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status))
+ goto out;
+ dev = (adr >> 16) & 0xffff;
+ fn = adr & 0xffff;
+
+ pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
+ if (hnd == handle)
+ break;
+
+ pbus = pdev->subordinate;
+ pci_dev_put(pdev);
+ }
+out:
+ list_for_each_entry_safe(node, tmp, &device_list, node)
+ kfree(node);
+
+ return pdev;
+}
+EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
+
/**
* acpi_pci_osc_control_set - commit requested control to Firmware
* @handle: acpi_handle for the target ACPI object
@@ -363,31 +467,46 @@ EXPORT_SYMBOL(acpi_pci_osc_control_set);
static int __devinit acpi_pci_root_add(struct acpi_device *device)
{
- int result = 0;
- struct acpi_pci_root *root = NULL;
- struct acpi_pci_root *tmp;
- acpi_status status = AE_OK;
- unsigned long long value = 0;
- acpi_handle handle = NULL;
+ unsigned long long segment, bus;
+ acpi_status status;
+ int result;
+ struct acpi_pci_root *root;
+ acpi_handle handle;
struct acpi_device *child;
u32 flags, base_flags;
+ segment = 0;
+ status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
+ &segment);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
+ return -ENODEV;
+ }
- if (!device)
- return -EINVAL;
+ /* Check _CRS first, then _BBN. If no _BBN, default to zero. */
+ bus = 0;
+ status = try_get_root_bridge_busnr(device->handle, &bus);
+ if (ACPI_FAILURE(status)) {
+ status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL, &bus);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ printk(KERN_ERR PREFIX
+ "no bus number in _CRS and can't evaluate _BBN\n");
+ return -ENODEV;
+ }
+ }
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
return -ENOMEM;
- INIT_LIST_HEAD(&root->node);
+ INIT_LIST_HEAD(&root->node);
root->device = device;
+ root->segment = segment & 0xFFFF;
+ root->bus_nr = bus & 0xFF;
strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
- device->ops.bind = acpi_pci_bind;
-
/*
* All supported architectures that use ACPI have support for
* PCI domains, so we indicate this in _OSC support capabilities.
@@ -395,79 +514,6 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
acpi_pci_osc_support(root, flags);
- /*
- * Segment
- * -------
- * Obtained via _SEG, if exists, otherwise assumed to be zero (0).
- */
- status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
- &value);
- switch (status) {
- case AE_OK:
- root->id.segment = (u16) value;
- break;
- case AE_NOT_FOUND:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Assuming segment 0 (no _SEG)\n"));
- root->id.segment = 0;
- break;
- default:
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SEG"));
- result = -ENODEV;
- goto end;
- }
-
- /*
- * Bus
- * ---
- * Obtained via _BBN, if exists, otherwise assumed to be zero (0).
- */
- status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL,
- &value);
- switch (status) {
- case AE_OK:
- root->id.bus = (u16) value;
- break;
- case AE_NOT_FOUND:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Assuming bus 0 (no _BBN)\n"));
- root->id.bus = 0;
- break;
- default:
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BBN"));
- result = -ENODEV;
- goto end;
- }
-
- /* Some systems have wrong _BBN */
- list_for_each_entry(tmp, &acpi_pci_roots, node) {
- if ((tmp->id.segment == root->id.segment)
- && (tmp->id.bus == root->id.bus)) {
- int bus = 0;
- acpi_status status;
-
- printk(KERN_ERR PREFIX
- "Wrong _BBN value, reboot"
- " and use option 'pci=noacpi'\n");
-
- status = try_get_root_bridge_busnr(device->handle, &bus);
- if (ACPI_FAILURE(status))
- break;
- if (bus != root->id.bus) {
- printk(KERN_INFO PREFIX
- "PCI _CRS %d overrides _BBN 0\n", bus);
- root->id.bus = bus;
- }
- break;
- }
- }
- /*
- * Device & Function
- * -----------------
- * Obtained from _ADR (which has already been evaluated for us).
- */
- root->id.device = device->pnp.bus_address >> 16;
- root->id.function = device->pnp.bus_address & 0xFFFF;
-
/*
* TBD: Need PCI interface for enumeration/configuration of roots.
*/
@@ -477,7 +523,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
printk(KERN_INFO PREFIX "%s [%s] (%04x:%02x)\n",
acpi_device_name(device), acpi_device_bid(device),
- root->id.segment, root->id.bus);
+ root->segment, root->bus_nr);
/*
* Scan the Root Bridge
@@ -486,11 +532,11 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
* PCI namespace does not get created until this call is made (and
* thus the root bridge's pci_dev does not exist).
*/
- root->bus = pci_acpi_scan_root(device, root->id.segment, root->id.bus);
+ root->bus = pci_acpi_scan_root(device, segment, bus);
if (!root->bus) {
printk(KERN_ERR PREFIX
"Bus %04x:%02x not present in PCI namespace\n",
- root->id.segment, root->id.bus);
+ root->segment, root->bus_nr);
result = -ENODEV;
goto end;
}
@@ -500,7 +546,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
* -----------------------
* Thus binding the ACPI and PCI devices.
*/
- result = acpi_pci_bind_root(device, &root->id, root->bus);
+ result = acpi_pci_bind_root(device);
if (result)
goto end;
@@ -511,8 +557,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
*/
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
if (ACPI_SUCCESS(status))
- result = acpi_pci_irq_add_prt(device->handle, root->id.segment,
- root->id.bus);
+ result = acpi_pci_irq_add_prt(device->handle, root->bus);
/*
* Scan and bind all _ADR-Based Devices
@@ -531,42 +576,28 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
if (flags != base_flags)
acpi_pci_osc_support(root, flags);
- end:
- if (result) {
- if (!list_empty(&root->node))
- list_del(&root->node);
- kfree(root);
- }
+ return 0;
+end:
+ if (!list_empty(&root->node))
+ list_del(&root->node);
+ kfree(root);
return result;
}
static int acpi_pci_root_start(struct acpi_device *device)
{
- struct acpi_pci_root *root;
+ struct acpi_pci_root *root = acpi_driver_data(device);
-
- list_for_each_entry(root, &acpi_pci_roots, node) {
- if (root->device == device) {
- pci_bus_add_devices(root->bus);
- return 0;
- }
- }
- return -ENODEV;
+ pci_bus_add_devices(root->bus);
+ return 0;
}
static int acpi_pci_root_remove(struct acpi_device *device, int type)
{
- struct acpi_pci_root *root = NULL;
-
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- root = acpi_driver_data(device);
+ struct acpi_pci_root *root = acpi_driver_data(device);
kfree(root);
-
return 0;
}
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 56665a63bf19..d74365d4a6e7 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -194,7 +194,7 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state)
static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0, state;
+ int result = 0;
int found = 0;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
@@ -236,18 +236,6 @@ static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
if (ACPI_FAILURE(status))
return -ENODEV;
- if (!acpi_power_nocheck) {
- /*
- * If acpi_power_nocheck is set, it is unnecessary to check
- * the power state after power transition.
- */
- result = acpi_power_get_state(resource->device->handle,
- &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_ON)
- return -ENOEXEC;
- }
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D0;
@@ -258,7 +246,7 @@ static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0, state;
+ int result = 0;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
struct list_head *node, *next;
@@ -293,18 +281,6 @@ static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
if (ACPI_FAILURE(status))
return -ENODEV;
- if (!acpi_power_nocheck) {
- /*
- * If acpi_power_nocheck is set, it is unnecessary to check
- * the power state after power transition.
- */
- result = acpi_power_get_state(handle, &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_OFF)
- return -ENOEXEC;
- }
-
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D3;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 23f0fb84f1c1..84e0f3c07442 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -89,7 +89,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr);
static const struct acpi_device_id processor_device_ids[] = {
{ACPI_PROCESSOR_OBJECT_HID, 0},
- {ACPI_PROCESSOR_HID, 0},
+ {"ACPI0007", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, processor_device_ids);
@@ -596,7 +596,21 @@ static int acpi_processor_get_info(struct acpi_device *device)
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No bus mastering arbitration control\n"));
- if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) {
+ if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
+ /* Declared with "Processor" statement; match ProcessorID */
+ status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX "Evaluating processor object\n");
+ return -ENODEV;
+ }
+
+ /*
+ * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+ * >>> 'acpi_get_processor_id(acpi_id, &id)' in
+ * arch/xxx/acpi.c
+ */
+ pr->acpi_id = object.processor.proc_id;
+ } else {
/*
* Declared with "Device" statement; match _UID.
* Note that we don't handle string _UIDs yet.
@@ -611,20 +625,6 @@ static int acpi_processor_get_info(struct acpi_device *device)
}
device_declaration = 1;
pr->acpi_id = value;
- } else {
- /* Declared with "Processor" statement; match ProcessorID */
- status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Evaluating processor object\n");
- return -ENODEV;
- }
-
- /*
- * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
- * >>> 'acpi_get_processor_id(acpi_id, &id)' in
- * arch/xxx/acpi.c
- */
- pr->acpi_id = object.processor.proc_id;
}
cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
@@ -649,7 +649,16 @@ static int acpi_processor_get_info(struct acpi_device *device)
return -ENODEV;
}
}
-
+ /*
+ * On some boxes several processors use the same processor bus id.
+ * But they are located in different scope. For example:
+ * \_SB.SCK0.CPU0
+ * \_SB.SCK1.CPU0
+ * Rename the processor device bus id. And the new bus id will be
+ * generated as the following format:
+ * CPU+CPU ID.
+ */
+ sprintf(acpi_device_bid(device), "CPU%X", pr->id);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
pr->acpi_id));
@@ -731,6 +740,8 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
acpi_processor_set_pdc(pr);
+ arch_acpi_processor_cleanup_pdc(pr);
+
#ifdef CONFIG_CPU_FREQ
acpi_processor_ppc_has_changed(pr);
#endif
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 10a2d913635a..0efa59e7e3af 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -139,7 +139,7 @@ static void acpi_safe_halt(void)
* are affected too. We pick the most conservative approach: we assume
* that the local APIC stops in both C2 and C3.
*/
-static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+static void lapic_timer_check_state(int state, struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
struct acpi_processor_power *pwr = &pr->power;
@@ -162,7 +162,7 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr,
pr->power.timer_broadcast_on_state = state;
}
-static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
+static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
{
unsigned long reason;
@@ -173,7 +173,7 @@ static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
}
/* Power(C) State timer broadcast control */
-static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+static void lapic_timer_state_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int broadcast)
{
@@ -190,10 +190,10 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr,
#else
-static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+static void lapic_timer_check_state(int state, struct acpi_processor *pr,
struct acpi_processor_cx *cstate) { }
-static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) { }
-static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
+static void lapic_timer_state_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int broadcast)
{
@@ -515,7 +515,8 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
- static int bm_check_flag;
+ static int bm_check_flag = -1;
+ static int bm_control_flag = -1;
if (!cx->address)
@@ -545,12 +546,14 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
}
/* All the logic here assumes flags.bm_check is same across all CPUs */
- if (!bm_check_flag) {
+ if (bm_check_flag == -1) {
/* Determine whether bm_check is needed based on CPU */
acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
bm_check_flag = pr->flags.bm_check;
+ bm_control_flag = pr->flags.bm_control;
} else {
pr->flags.bm_check = bm_check_flag;
+ pr->flags.bm_control = bm_control_flag;
}
if (pr->flags.bm_check) {
@@ -614,29 +617,25 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
- acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C2:
acpi_processor_power_verify_c2(cx);
- if (cx->valid)
- acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C3:
acpi_processor_power_verify_c3(pr, cx);
- if (cx->valid)
- acpi_timer_check_state(i, pr, cx);
break;
}
- if (cx->valid)
- tsc_check_state(cx->type);
+ if (!cx->valid)
+ continue;
- if (cx->valid)
- working++;
+ lapic_timer_check_state(i, pr, cx);
+ tsc_check_state(cx->type);
+ working++;
}
- acpi_propagate_timer_broadcast(pr);
+ lapic_timer_propagate_broadcast(pr);
return (working);
}
@@ -839,7 +838,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
return 0;
}
- acpi_state_timer_broadcast(pr, cx, 1);
+ lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
@@ -847,7 +846,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
local_irq_enable();
cx->usage++;
- acpi_state_timer_broadcast(pr, cx, 0);
+ lapic_timer_state_broadcast(pr, cx, 0);
return idle_time;
}
@@ -892,7 +891,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
* Must be done before busmaster disable as we might need to
* access HPET !
*/
- acpi_state_timer_broadcast(pr, cx, 1);
+ lapic_timer_state_broadcast(pr, cx, 1);
if (cx->type == ACPI_STATE_C3)
ACPI_FLUSH_CPU_CACHE();
@@ -914,7 +913,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
cx->usage++;
- acpi_state_timer_broadcast(pr, cx, 0);
+ lapic_timer_state_broadcast(pr, cx, 0);
cx->time += sleep_ticks;
return idle_time;
}
@@ -981,7 +980,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
* Must be done before busmaster disable as we might need to
* access HPET !
*/
- acpi_state_timer_broadcast(pr, cx, 1);
+ lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
/*
@@ -1026,7 +1025,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
cx->usage++;
- acpi_state_timer_broadcast(pr, cx, 0);
+ lapic_timer_state_broadcast(pr, cx, 0);
cx->time += sleep_ticks;
return idle_time;
}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 8ff510b91d88..781435d7e369 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -95,7 +95,7 @@ acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, cha
}
static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL);
-static int acpi_bus_hot_remove_device(void *context)
+static void acpi_bus_hot_remove_device(void *context)
{
struct acpi_device *device;
acpi_handle handle = context;
@@ -104,10 +104,10 @@ static int acpi_bus_hot_remove_device(void *context)
acpi_status status = AE_OK;
if (acpi_bus_get_device(handle, &device))
- return 0;
+ return;
if (!device)
- return 0;
+ return;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Hot-removing device %s...\n", dev_name(&device->dev)));
@@ -115,7 +115,7 @@ static int acpi_bus_hot_remove_device(void *context)
if (acpi_bus_trim(device, 1)) {
printk(KERN_ERR PREFIX
"Removing device failed\n");
- return -1;
+ return;
}
/* power off device */
@@ -142,9 +142,10 @@ static int acpi_bus_hot_remove_device(void *context)
*/
status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ printk(KERN_WARNING PREFIX
+ "Eject device failed\n");
- return 0;
+ return;
}
static ssize_t
@@ -155,7 +156,6 @@ acpi_eject_store(struct device *d, struct device_attribute *attr,
acpi_status status;
acpi_object_type type = 0;
struct acpi_device *acpi_device = to_acpi_device(d);
- struct task_struct *task;
if ((!count) || (buf[0] != '1')) {
return -EINVAL;
@@ -172,11 +172,7 @@ acpi_eject_store(struct device *d, struct device_attribute *attr,
goto err;
}
- /* remove the device in another thread to fix the deadlock issue */
- task = kthread_run(acpi_bus_hot_remove_device,
- acpi_device->handle, "acpi_hot_remove_device");
- if (IS_ERR(task))
- ret = PTR_ERR(task);
+ acpi_os_hotplug_execute(acpi_bus_hot_remove_device, acpi_device->handle);
err:
return ret;
}
@@ -198,12 +194,12 @@ acpi_device_path_show(struct device *dev, struct device_attribute *attr, char *b
int result;
result = acpi_get_name(acpi_dev->handle, ACPI_FULL_PATHNAME, &path);
- if(result)
+ if (result)
goto end;
result = sprintf(buf, "%s\n", (char*)path.pointer);
kfree(path.pointer);
- end:
+end:
return result;
}
static DEVICE_ATTR(path, 0444, acpi_device_path_show, NULL);
@@ -217,21 +213,21 @@ static int acpi_device_setup_files(struct acpi_device *dev)
/*
* Devices gotten from FADT don't have a "path" attribute
*/
- if(dev->handle) {
+ if (dev->handle) {
result = device_create_file(&dev->dev, &dev_attr_path);
- if(result)
+ if (result)
goto end;
}
- if(dev->flags.hardware_id) {
+ if (dev->flags.hardware_id) {
result = device_create_file(&dev->dev, &dev_attr_hid);
- if(result)
+ if (result)
goto end;
}
- if (dev->flags.hardware_id || dev->flags.compatible_ids){
+ if (dev->flags.hardware_id || dev->flags.compatible_ids) {
result = device_create_file(&dev->dev, &dev_attr_modalias);
- if(result)
+ if (result)
goto end;
}
@@ -242,7 +238,7 @@ static int acpi_device_setup_files(struct acpi_device *dev)
status = acpi_get_handle(dev->handle, "_EJ0", &temp);
if (ACPI_SUCCESS(status))
result = device_create_file(&dev->dev, &dev_attr_eject);
- end:
+end:
return result;
}
@@ -262,9 +258,9 @@ static void acpi_device_remove_files(struct acpi_device *dev)
if (dev->flags.hardware_id || dev->flags.compatible_ids)
device_remove_file(&dev->dev, &dev_attr_modalias);
- if(dev->flags.hardware_id)
+ if (dev->flags.hardware_id)
device_remove_file(&dev->dev, &dev_attr_hid);
- if(dev->handle)
+ if (dev->handle)
device_remove_file(&dev->dev, &dev_attr_path);
}
/* --------------------------------------------------------------------------
@@ -512,7 +508,7 @@ static int acpi_device_register(struct acpi_device *device,
break;
}
}
- if(!found) {
+ if (!found) {
acpi_device_bus_id = new_bus_id;
strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device");
acpi_device_bus_id->instance_no = 0;
@@ -530,22 +526,21 @@ static int acpi_device_register(struct acpi_device *device,
if (device->parent)
device->dev.parent = &parent->dev;
device->dev.bus = &acpi_bus_type;
- device_initialize(&device->dev);
device->dev.release = &acpi_device_release;
- result = device_add(&device->dev);
- if(result) {
- dev_err(&device->dev, "Error adding device\n");
+ result = device_register(&device->dev);
+ if (result) {
+ dev_err(&device->dev, "Error registering device\n");
goto end;
}
result = acpi_device_setup_files(device);
- if(result)
+ if (result)
printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n",
dev_name(&device->dev));
device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
return 0;
- end:
+end:
mutex_lock(&acpi_device_lock);
if (device->parent)
list_del(&device->node);
@@ -577,7 +572,7 @@ static void acpi_device_unregister(struct acpi_device *device, int type)
* @device: the device to add and initialize
* @driver: driver for the device
*
- * Used to initialize a device via its device driver. Called whenever a
+ * Used to initialize a device via its device driver. Called whenever a
* driver is bound to a device. Invokes the driver's add() ops.
*/
static int
@@ -585,7 +580,6 @@ acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver)
{
int result = 0;
-
if (!device || !driver)
return -EINVAL;
@@ -802,7 +796,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- end:
+end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
return 0;
@@ -1070,7 +1064,7 @@ static void acpi_device_set_id(struct acpi_device *device,
break;
}
- /*
+ /*
* \_SB
* ----
* Fix for the system root bus device -- the only root-level device.
@@ -1320,7 +1314,7 @@ acpi_add_single_object(struct acpi_device **child,
device->parent->ops.bind(device);
}
- end:
+end:
if (!result)
*child = device;
else {
@@ -1464,7 +1458,6 @@ acpi_bus_add(struct acpi_device **child,
return result;
}
-
EXPORT_SYMBOL(acpi_bus_add);
int acpi_bus_start(struct acpi_device *device)
@@ -1484,7 +1477,6 @@ int acpi_bus_start(struct acpi_device *device)
}
return result;
}
-
EXPORT_SYMBOL(acpi_bus_start);
int acpi_bus_trim(struct acpi_device *start, int rmdevice)
@@ -1542,7 +1534,6 @@ int acpi_bus_trim(struct acpi_device *start, int rmdevice)
}
EXPORT_SYMBOL_GPL(acpi_bus_trim);
-
static int acpi_bus_scan_fixed(struct acpi_device *root)
{
int result = 0;
@@ -1610,6 +1601,6 @@ int __init acpi_scan_init(void)
if (result)
acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
- Done:
+Done:
return result;
}
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 1bdfb37377e3..8851315ce858 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -76,6 +76,7 @@ MODULE_LICENSE("GPL");
static int brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
+static int register_count = 0;
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
static int acpi_video_resume(struct acpi_device *device);
@@ -586,6 +587,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
},
},
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 7720",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
+ },
+ },
{}
};
@@ -976,6 +985,11 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
device->backlight->props.max_brightness = device->brightness->count-3;
kfree(name);
+ result = sysfs_create_link(&device->backlight->dev.kobj,
+ &device->dev->dev.kobj, "device");
+ if (result)
+ printk(KERN_ERR PREFIX "Create sysfs link\n");
+
device->cdev = thermal_cooling_device_register("LCD",
device->dev, &video_cooling_ops);
if (IS_ERR(device->cdev))
@@ -1054,15 +1068,15 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
static int acpi_video_bus_check(struct acpi_video_bus *video)
{
acpi_status status = -ENOENT;
- struct device *dev;
+ struct pci_dev *dev;
if (!video)
return -EINVAL;
- dev = acpi_get_physical_pci_device(video->device->handle);
+ dev = acpi_get_pci_dev(video->device->handle);
if (!dev)
return -ENODEV;
- put_device(dev);
+ pci_dev_put(dev);
/* Since there is no HID, CID and so on for VGA driver, we have
* to check well known required nodes.
@@ -1990,6 +2004,7 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
+ sysfs_remove_link(&device->backlight->dev.kobj, "device");
backlight_device_unregister(device->backlight);
if (device->cdev) {
sysfs_remove_link(&device->dev->dev.kobj,
@@ -2318,6 +2333,13 @@ static int __init intel_opregion_present(void)
int acpi_video_register(void)
{
int result = 0;
+ if (register_count) {
+ /*
+ * if the function of acpi_video_register is already called,
+ * don't register the acpi_vide_bus again and return no error.
+ */
+ return 0;
+ }
acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
if (!acpi_video_dir)
@@ -2329,10 +2351,35 @@ int acpi_video_register(void)
return -ENODEV;
}
+ /*
+ * When the acpi_video_bus is loaded successfully, increase
+ * the counter reference.
+ */
+ register_count = 1;
+
return 0;
}
EXPORT_SYMBOL(acpi_video_register);
+void acpi_video_unregister(void)
+{
+ if (!register_count) {
+ /*
+ * If the acpi video bus is already unloaded, don't
+ * unload it again and return directly.
+ */
+ return;
+ }
+ acpi_bus_unregister_driver(&acpi_video_bus);
+
+ remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+
+ register_count = 0;
+
+ return;
+}
+EXPORT_SYMBOL(acpi_video_unregister);
+
/*
* This is kind of nasty. Hardware using Intel chipsets may require
* the video opregion code to be run first in order to initialise
@@ -2350,16 +2397,12 @@ static int __init acpi_video_init(void)
return acpi_video_register();
}
-void acpi_video_exit(void)
+static void __exit acpi_video_exit(void)
{
-
- acpi_bus_unregister_driver(&acpi_video_bus);
-
- remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+ acpi_video_unregister();
return;
}
-EXPORT_SYMBOL(acpi_video_exit);
module_init(acpi_video_init);
module_exit(acpi_video_exit);
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 09737275e25f..7cd2b63435ea 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -10,7 +10,7 @@
* assinged
*
* After PCI devices are glued with ACPI devices
- * acpi_get_physical_pci_device() can be called to identify ACPI graphics
+ * acpi_get_pci_dev() can be called to identify ACPI graphics
* devices for which a real graphics card is plugged in
*
* Now acpi_video_get_capabilities() can be called to check which
@@ -36,6 +36,7 @@
#include <linux/acpi.h>
#include <linux/dmi.h>
+#include <linux/pci.h>
ACPI_MODULE_NAME("video");
#define _COMPONENT ACPI_VIDEO_COMPONENT
@@ -109,7 +110,7 @@ static acpi_status
find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
{
long *cap = context;
- struct device *dev;
+ struct pci_dev *dev;
struct acpi_device *acpi_dev;
const struct acpi_device_id video_ids[] = {
@@ -120,10 +121,10 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
return AE_OK;
if (!acpi_match_device_ids(acpi_dev, video_ids)) {
- dev = acpi_get_physical_pci_device(handle);
+ dev = acpi_get_pci_dev(handle);
if (!dev)
return AE_OK;
- put_device(dev);
+ pci_dev_put(dev);
*cap |= acpi_is_video_device(acpi_dev);
}
return AE_OK;
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index dc425e74a268..e4b4e8898e39 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -419,7 +419,7 @@ void intel_opregion_free(struct drm_device *dev, int suspend)
return;
if (!suspend)
- acpi_video_exit();
+ acpi_video_unregister();
opregion->acpi->drdy = 0;
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index fbc63d5e459f..eb159587d0bf 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -354,7 +354,7 @@ acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
status = acpi_run_hpp(handle, hpp);
if (ACPI_SUCCESS(status))
break;
- if (acpi_root_bridge(handle))
+ if (acpi_is_root_bridge(handle))
break;
status = acpi_get_parent(handle, &phandle);
if (ACPI_FAILURE(status))
@@ -428,7 +428,7 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags)
status = acpi_run_oshp(handle);
if (ACPI_SUCCESS(status))
goto got_one;
- if (acpi_root_bridge(handle))
+ if (acpi_is_root_bridge(handle))
break;
chandle = handle;
status = acpi_get_parent(chandle, &handle);
@@ -449,42 +449,6 @@ got_one:
}
EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
-/* acpi_root_bridge - check to see if this acpi object is a root bridge
- *
- * @handle - the acpi object in question.
- */
-int acpi_root_bridge(acpi_handle handle)
-{
- acpi_status status;
- struct acpi_device_info *info;
- struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
- int i;
-
- status = acpi_get_object_info(handle, &buffer);
- if (ACPI_SUCCESS(status)) {
- info = buffer.pointer;
- if ((info->valid & ACPI_VALID_HID) &&
- !strcmp(PCI_ROOT_HID_STRING,
- info->hardware_id.value)) {
- kfree(buffer.pointer);
- return 1;
- }
- if (info->valid & ACPI_VALID_CID) {
- for (i=0; i < info->compatibility_id.count; i++) {
- if (!strcmp(PCI_ROOT_HID_STRING,
- info->compatibility_id.id[i].value)) {
- kfree(buffer.pointer);
- return 1;
- }
- }
- }
- kfree(buffer.pointer);
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(acpi_root_bridge);
-
-
static int is_ejectable(acpi_handle handle)
{
acpi_status status;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 3a6064bce561..0cb0f830a993 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -678,18 +678,9 @@ static void remove_bridge(acpi_handle handle)
static struct pci_dev * get_apic_pci_info(acpi_handle handle)
{
- struct acpi_pci_id id;
- struct pci_bus *bus;
struct pci_dev *dev;
- if (ACPI_FAILURE(acpi_get_pci_id(handle, &id)))
- return NULL;
-
- bus = pci_find_bus(id.segment, id.bus);
- if (!bus)
- return NULL;
-
- dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function));
+ dev = acpi_get_pci_dev(handle);
if (!dev)
return NULL;
@@ -1396,19 +1387,16 @@ static void acpiphp_sanitize_bus(struct pci_bus *bus)
/* Program resources in newly inserted bridge */
static int acpiphp_configure_bridge (acpi_handle handle)
{
- struct acpi_pci_id pci_id;
+ struct pci_dev *dev;
struct pci_bus *bus;
- if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) {
+ dev = acpi_get_pci_dev(handle);
+ if (!dev) {
err("cannot get PCI domain and bus number for bridge\n");
return -EINVAL;
}
- bus = pci_find_bus(pci_id.segment, pci_id.bus);
- if (!bus) {
- err("cannot find bus %d:%d\n",
- pci_id.segment, pci_id.bus);
- return -EINVAL;
- }
+
+ bus = dev->bus;
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
@@ -1416,6 +1404,7 @@ static int acpiphp_configure_bridge (acpi_handle handle)
acpiphp_set_hpp_values(handle, bus);
pci_enable_bridges(bus);
acpiphp_configure_ioapics(handle);
+ pci_dev_put(dev);
return 0;
}
@@ -1631,7 +1620,7 @@ find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
{
int *count = (int *)context;
- if (acpi_root_bridge(handle)) {
+ if (acpi_is_root_bridge(handle)) {
acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
handle_hotplug_event_bridge, NULL);
(*count)++;
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c682ac536415..5613483db141 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -34,6 +34,23 @@ config ACER_WMI
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
+config ACERHDF
+ tristate "Acer Aspire One temperature and fan driver"
+ depends on THERMAL && THERMAL_HWMON && ACPI
+ ---help---
+ This is a driver for Acer Aspire One netbooks. It allows to access
+ the temperature sensor and to control the fan.
+
+ After loading this driver the BIOS is still in control of the fan.
+ To let the kernel handle the fan, do:
+ echo -n enabled > /sys/class/thermal/thermal_zone0/mode
+
+ For more information about this driver see
+ <http://piie.net/files/acerhdf_README.txt>
+
+ If you have an Acer Aspire One netbook, say Y or M
+ here.
+
config ASUS_LAPTOP
tristate "Asus Laptop Extras (EXPERIMENTAL)"
depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e40c7bd1b87e..641b8bfa5538 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
+obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
new file mode 100644
index 000000000000..bdfee177eefb
--- /dev/null
+++ b/drivers/platform/x86/acerhdf.c
@@ -0,0 +1,602 @@
+/*
+ * acerhdf - A driver which monitors the temperature
+ * of the aspire one netbook, turns on/off the fan
+ * as soon as the upper/lower threshold is reached.
+ *
+ * (C) 2009 - Peter Feuerer peter (a) piie.net
+ * http://piie.net
+ * 2009 Borislav Petkov <petkovbb@gmail.com>
+ *
+ * Inspired by and many thanks to:
+ * o acerfand - Rachel Greenham
+ * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com
+ * - Petr Tomasek tomasek (#) etf,cuni,cz
+ * - Carlos Corbacho cathectic (at) gmail.com
+ * o lkml - Matthew Garrett
+ * - Borislav Petkov
+ * - Andreas Mohr
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) "acerhdf: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/dmi.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/sched.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+
+/*
+ * The driver is started with "kernel mode off" by default. That means, the BIOS
+ * is still in control of the fan. In this mode the driver allows to read the
+ * temperature of the cpu and a userspace tool may take over control of the fan.
+ * If the driver is switched to "kernel mode" (e.g. via module parameter) the
+ * driver is in full control of the fan. If you want the module to be started in
+ * kernel mode by default, define the following:
+ */
+#undef START_IN_KERNEL_MODE
+
+#define DRV_VER "0.5.13"
+
+/*
+ * According to the Atom N270 datasheet,
+ * (http://download.intel.com/design/processor/datashts/320032.pdf) the
+ * CPU's optimal operating limits denoted in junction temperature as
+ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
+ * assume 89°C is critical temperature.
+ */
+#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_FAN_OFF 0
+#define ACERHDF_FAN_AUTO 1
+
+/*
+ * No matter what value the user puts into the fanon variable, turn on the fan
+ * at 80 degree Celsius to prevent hardware damage
+ */
+#define ACERHDF_MAX_FANON 80
+
+/*
+ * Maximum interval between two temperature checks is 15 seconds, as the die
+ * can get hot really fast under heavy load (plus we shouldn't forget about
+ * possible impact of _external_ aggressive sources such as heaters, sun etc.)
+ */
+#define ACERHDF_MAX_INTERVAL 15
+
+#ifdef START_IN_KERNEL_MODE
+static int kernelmode = 1;
+#else
+static int kernelmode;
+#endif
+
+static unsigned int interval = 10;
+static unsigned int fanon = 63;
+static unsigned int fanoff = 58;
+static unsigned int verbose;
+static unsigned int fanstate = ACERHDF_FAN_AUTO;
+static char force_bios[16];
+static unsigned int prev_interval;
+struct thermal_zone_device *thz_dev;
+struct thermal_cooling_device *cl_dev;
+struct platform_device *acerhdf_dev;
+
+module_param(kernelmode, uint, 0);
+MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
+module_param(interval, uint, 0600);
+MODULE_PARM_DESC(interval, "Polling interval of temperature check");
+module_param(fanon, uint, 0600);
+MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
+module_param(fanoff, uint, 0600);
+MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
+module_param(verbose, uint, 0600);
+MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
+module_param_string(force_bios, force_bios, 16, 0);
+MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+
+/* BIOS settings */
+struct bios_settings_t {
+ const char *vendor;
+ const char *version;
+ unsigned char fanreg;
+ unsigned char tempreg;
+ unsigned char fancmd[2]; /* fan off and auto commands */
+};
+
+/* Register addresses and values for different BIOS versions */
+static const struct bios_settings_t bios_tbl[] = {
+ {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+ {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+ {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+ {"", "", 0, 0, {0, 0} }
+};
+
+static const struct bios_settings_t *bios_cfg __read_mostly;
+
+
+static int acerhdf_get_temp(int *temp)
+{
+ u8 read_temp;
+
+ if (ec_read(bios_cfg->tempreg, &read_temp))
+ return -EINVAL;
+
+ *temp = read_temp;
+
+ return 0;
+}
+
+static int acerhdf_get_fanstate(int *state)
+{
+ u8 fan;
+ bool tmp;
+
+ if (ec_read(bios_cfg->fanreg, &fan))
+ return -EINVAL;
+
+ tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
+ *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+
+ return 0;
+}
+
+static void acerhdf_change_fanstate(int state)
+{
+ unsigned char cmd;
+
+ if (verbose)
+ pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
+ "OFF" : "ON");
+
+ if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
+ pr_err("invalid fan state %d requested, setting to auto!\n",
+ state);
+ state = ACERHDF_FAN_AUTO;
+ }
+
+ cmd = bios_cfg->fancmd[state];
+ fanstate = state;
+
+ ec_write(bios_cfg->fanreg, cmd);
+}
+
+static void acerhdf_check_param(struct thermal_zone_device *thermal)
+{
+ if (fanon > ACERHDF_MAX_FANON) {
+ pr_err("fanon temperature too high, set to %d\n",
+ ACERHDF_MAX_FANON);
+ fanon = ACERHDF_MAX_FANON;
+ }
+
+ if (kernelmode && prev_interval != interval) {
+ if (interval > ACERHDF_MAX_INTERVAL) {
+ pr_err("interval too high, set to %d\n",
+ ACERHDF_MAX_INTERVAL);
+ interval = ACERHDF_MAX_INTERVAL;
+ }
+ if (verbose)
+ pr_notice("interval changed to: %d\n",
+ interval);
+ thermal->polling_delay = interval*1000;
+ prev_interval = interval;
+ }
+}
+
+/*
+ * This is the thermal zone callback which does the delayed polling of the fan
+ * state. We do check /sysfs-originating settings here in acerhdf_check_param()
+ * as late as the polling interval is since we can't do that in the respective
+ * accessors of the module parameters.
+ */
+static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
+ unsigned long *t)
+{
+ int temp, err = 0;
+
+ acerhdf_check_param(thermal);
+
+ err = acerhdf_get_temp(&temp);
+ if (err)
+ return err;
+
+ if (verbose)
+ pr_notice("temp %d\n", temp);
+
+ *t = temp;
+ return 0;
+}
+
+static int acerhdf_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ /* if the cooling device is the one from acerhdf bind it */
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error binding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int acerhdf_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error unbinding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline void acerhdf_revert_to_bios_mode(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ kernelmode = 0;
+ if (thz_dev)
+ thz_dev->polling_delay = 0;
+ pr_notice("kernel mode fan control OFF\n");
+}
+static inline void acerhdf_enable_kernelmode(void)
+{
+ kernelmode = 1;
+
+ thz_dev->polling_delay = interval*1000;
+ thermal_zone_device_update(thz_dev);
+ pr_notice("kernel mode fan control ON\n");
+}
+
+static int acerhdf_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ if (verbose)
+ pr_notice("kernel mode fan control %d\n", kernelmode);
+
+ *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
+ : THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+/*
+ * set operation mode;
+ * enabled: the thermal layer of the kernel takes care about
+ * the temperature and the fan.
+ * disabled: the BIOS takes control of the fan.
+ */
+static int acerhdf_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
+ acerhdf_revert_to_bios_mode();
+ else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
+ acerhdf_enable_kernelmode();
+
+ return 0;
+}
+
+static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type *type)
+{
+ if (trip == 0)
+ *type = THERMAL_TRIP_ACTIVE;
+
+ return 0;
+}
+
+static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+ unsigned long *temp)
+{
+ if (trip == 0)
+ *temp = fanon;
+
+ return 0;
+}
+
+static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature)
+{
+ *temperature = ACERHDF_TEMP_CRIT;
+ return 0;
+}
+
+/* bind callback functions to thermalzone */
+struct thermal_zone_device_ops acerhdf_dev_ops = {
+ .bind = acerhdf_bind,
+ .unbind = acerhdf_unbind,
+ .get_temp = acerhdf_get_ec_temp,
+ .get_mode = acerhdf_get_mode,
+ .set_mode = acerhdf_set_mode,
+ .get_trip_type = acerhdf_get_trip_type,
+ .get_trip_temp = acerhdf_get_trip_temp,
+ .get_crit_temp = acerhdf_get_crit_temp,
+};
+
+
+/*
+ * cooling device callback functions
+ * get maximal fan cooling state
+ */
+static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = 1;
+
+ return 0;
+}
+
+static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ int err = 0, tmp;
+
+ err = acerhdf_get_fanstate(&tmp);
+ if (err)
+ return err;
+
+ *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
+ return 0;
+}
+
+/* change current fan state - is overwritten when running in kernel mode */
+static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ int cur_temp, cur_state, err = 0;
+
+ if (!kernelmode)
+ return 0;
+
+ err = acerhdf_get_temp(&cur_temp);
+ if (err) {
+ pr_err("error reading temperature, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ err = acerhdf_get_fanstate(&cur_state);
+ if (err) {
+ pr_err("error reading fan state, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ if (state == 0) {
+ /* turn fan off only if below fanoff temperature */
+ if ((cur_state == ACERHDF_FAN_AUTO) &&
+ (cur_temp < fanoff))
+ acerhdf_change_fanstate(ACERHDF_FAN_OFF);
+ } else {
+ if (cur_state == ACERHDF_FAN_OFF)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ }
+ return 0;
+
+err_out:
+ acerhdf_revert_to_bios_mode();
+ return -EINVAL;
+}
+
+/* bind fan callbacks to fan device */
+struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+ .get_max_state = acerhdf_get_max_state,
+ .get_cur_state = acerhdf_get_cur_state,
+ .set_cur_state = acerhdf_set_cur_state,
+};
+
+/* suspend / resume functionality */
+static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
+{
+ if (kernelmode)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+
+ if (verbose)
+ pr_notice("going suspend\n");
+
+ return 0;
+}
+
+static int acerhdf_resume(struct platform_device *device)
+{
+ if (verbose)
+ pr_notice("resuming\n");
+
+ return 0;
+}
+
+static int __devinit acerhdf_probe(struct platform_device *device)
+{
+ return 0;
+}
+
+static int acerhdf_remove(struct platform_device *device)
+{
+ return 0;
+}
+
+struct platform_driver acerhdf_drv = {
+ .driver = {
+ .name = "acerhdf",
+ .owner = THIS_MODULE,
+ },
+ .probe = acerhdf_probe,
+ .remove = acerhdf_remove,
+ .suspend = acerhdf_suspend,
+ .resume = acerhdf_resume,
+};
+
+
+/* check hardware */
+static int acerhdf_check_hardware(void)
+{
+ char const *vendor, *version, *product;
+ int i;
+
+ /* get BIOS data */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ version = dmi_get_system_info(DMI_BIOS_VERSION);
+ product = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
+
+ if (!force_bios[0]) {
+ if (strncmp(product, "AO", 2)) {
+ pr_err("no Aspire One hardware found\n");
+ return -EINVAL;
+ }
+ } else {
+ pr_info("forcing BIOS version: %s\n", version);
+ version = force_bios;
+ kernelmode = 0;
+ }
+
+ if (verbose)
+ pr_info("BIOS info: %s %s, product: %s\n",
+ vendor, version, product);
+
+ /* search BIOS version and vendor in BIOS settings table */
+ for (i = 0; bios_tbl[i].version[0]; i++) {
+ if (!strcmp(bios_tbl[i].vendor, vendor) &&
+ !strcmp(bios_tbl[i].version, version)) {
+ bios_cfg = &bios_tbl[i];
+ break;
+ }
+ }
+
+ if (!bios_cfg) {
+ pr_err("unknown (unsupported) BIOS version %s/%s, "
+ "please report, aborting!\n", vendor, version);
+ return -EINVAL;
+ }
+
+ /*
+ * if started with kernel mode off, prevent the kernel from switching
+ * off the fan
+ */
+ if (!kernelmode) {
+ pr_notice("Fan control off, to enable do:\n");
+ pr_notice("echo -n \"enabled\" > "
+ "/sys/class/thermal/thermal_zone0/mode\n");
+ }
+
+ return 0;
+}
+
+static int acerhdf_register_platform(void)
+{
+ int err = 0;
+
+ err = platform_driver_register(&acerhdf_drv);
+ if (err)
+ return err;
+
+ acerhdf_dev = platform_device_alloc("acerhdf", -1);
+ platform_device_add(acerhdf_dev);
+
+ return 0;
+}
+
+static void acerhdf_unregister_platform(void)
+{
+ if (!acerhdf_dev)
+ return;
+
+ platform_device_del(acerhdf_dev);
+ platform_driver_unregister(&acerhdf_drv);
+}
+
+static int acerhdf_register_thermal(void)
+{
+ cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
+ &acerhdf_cooling_ops);
+
+ if (IS_ERR(cl_dev))
+ return -EINVAL;
+
+ thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ &acerhdf_dev_ops, 0, 0, 0,
+ (kernelmode) ? interval*1000 : 0);
+ if (IS_ERR(thz_dev))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void acerhdf_unregister_thermal(void)
+{
+ if (cl_dev) {
+ thermal_cooling_device_unregister(cl_dev);
+ cl_dev = NULL;
+ }
+
+ if (thz_dev) {
+ thermal_zone_device_unregister(thz_dev);
+ thz_dev = NULL;
+ }
+}
+
+static int __init acerhdf_init(void)
+{
+ int err = 0;
+
+ err = acerhdf_check_hardware();
+ if (err)
+ goto out_err;
+
+ err = acerhdf_register_platform();
+ if (err)
+ goto err_unreg;
+
+ err = acerhdf_register_thermal();
+ if (err)
+ goto err_unreg;
+
+ return 0;
+
+err_unreg:
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+
+out_err:
+ return -ENODEV;
+}
+
+static void __exit acerhdf_exit(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Feuerer");
+MODULE_DESCRIPTION("Aspire One temperature and fan driver");
+MODULE_ALIAS("dmi:*:*Acer*:*:");
+MODULE_ALIAS("dmi:*:*Gateway*:*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:*:");
+
+module_init(acerhdf_init);
+module_exit(acerhdf_exit);
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 2fab94162147..0f900cc9fa7a 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -46,10 +46,53 @@ struct key_entry {
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_SW, KE_IGNORE, KE_END };
+
+/*
+ * Certain keys are flagged as KE_IGNORE. All of these are either
+ * notifications (rather than requests for change) or are also sent
+ * via the keyboard controller so should not be sent again.
+ */
static struct key_entry dell_wmi_keymap[] = {
{KE_KEY, 0xe045, KEY_PROG1},
+ {KE_KEY, 0xe009, KEY_EJECTCD},
+
+ /* These also contain the brightness level at offset 6 */
+ {KE_KEY, 0xe006, KEY_BRIGHTNESSUP},
+ {KE_KEY, 0xe005, KEY_BRIGHTNESSDOWN},
+
+ /* Battery health status button */
+ {KE_KEY, 0xe007, KEY_BATTERY},
+
+ /* This is actually for all radios. Although physically a
+ * switch, the notification does not provide an indication of
+ * state and so it should be reported as a key */
+ {KE_KEY, 0xe008, KEY_WLAN},
+
+ /* The next device is at offset 6, the active devices are at
+ offset 8 and the attached devices at offset 10 */
+ {KE_KEY, 0xe00b, KEY_DISPLAYTOGGLE},
+
+ {KE_IGNORE, 0xe00c, KEY_KBDILLUMTOGGLE},
+
+ /* BIOS error detected */
+ {KE_IGNORE, 0xe00d, KEY_RESERVED},
+
+ /* Wifi Catcher */
+ {KE_KEY, 0xe011, KEY_PROG2},
+
+ /* Ambient light sensor toggle */
+ {KE_IGNORE, 0xe013, KEY_RESERVED},
+
+ {KE_IGNORE, 0xe020, KEY_MUTE},
+ {KE_IGNORE, 0xe02e, KEY_VOLUMEDOWN},
+ {KE_IGNORE, 0xe030, KEY_VOLUMEUP},
+ {KE_IGNORE, 0xe033, KEY_KBDILLUMUP},
+ {KE_IGNORE, 0xe034, KEY_KBDILLUMDOWN},
+ {KE_IGNORE, 0xe03a, KEY_CAPSLOCK},
+ {KE_IGNORE, 0xe045, KEY_NUMLOCK},
+ {KE_IGNORE, 0xe046, KEY_SCROLLLOCK},
{KE_END, 0}
};
@@ -122,15 +165,20 @@ static void dell_wmi_notify(u32 value, void *context)
if (obj && obj->type == ACPI_TYPE_BUFFER) {
int *buffer = (int *)obj->buffer.pointer;
- key = dell_wmi_get_entry_by_scancode(buffer[1]);
+ /*
+ * The upper bytes of the event may contain
+ * additional information, so mask them off for the
+ * scancode lookup
+ */
+ key = dell_wmi_get_entry_by_scancode(buffer[1] & 0xFFFF);
if (key) {
input_report_key(dell_wmi_input_dev, key->keycode, 1);
input_sync(dell_wmi_input_dev);
input_report_key(dell_wmi_input_dev, key->keycode, 0);
input_sync(dell_wmi_input_dev);
- } else
+ } else if (buffer[1] & 0xFFFF)
printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n",
- buffer[1]);
+ buffer[1] & 0xFFFF);
}
}
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 16fffe44e333..4ac2311c00af 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -47,7 +47,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
#define HPWMI_DISPLAY_QUERY 0x1
#define HPWMI_HDDTEMP_QUERY 0x2
#define HPWMI_ALS_QUERY 0x3
-#define HPWMI_DOCK_QUERY 0x4
+#define HPWMI_HARDWARE_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
#define HPWMI_HOTKEY_QUERY 0xc
@@ -75,10 +75,9 @@ struct key_entry {
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_END };
static struct key_entry hp_wmi_keymap[] = {
- {KE_SW, 0x01, SW_DOCK},
{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
{KE_KEY, 0x20e6, KEY_PROG1},
@@ -151,7 +150,22 @@ static int hp_wmi_als_state(void)
static int hp_wmi_dock_state(void)
{
- return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return ret & 0x1;
+}
+
+static int hp_wmi_tablet_state(void)
+{
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return (ret & 0x4) ? 1 : 0;
}
static int hp_wmi_set_block(void *data, bool blocked)
@@ -232,6 +246,15 @@ static ssize_t show_dock(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%d\n", value);
}
+static ssize_t show_tablet(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int value = hp_wmi_tablet_state();
+ if (value < 0)
+ return -EINVAL;
+ return sprintf(buf, "%d\n", value);
+}
+
static ssize_t set_als(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -244,6 +267,7 @@ static DEVICE_ATTR(display, S_IRUGO, show_display, NULL);
static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL);
static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
+static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
{
@@ -326,13 +350,13 @@ static void hp_wmi_notify(u32 value, void *context)
key->keycode, 0);
input_sync(hp_wmi_input_dev);
break;
- case KE_SW:
- input_report_switch(hp_wmi_input_dev,
- key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
+ } else if (eventcode == 0x1) {
+ input_report_switch(hp_wmi_input_dev, SW_DOCK,
+ hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
} else if (eventcode == 0x5) {
if (wifi_rfkill)
rfkill_set_sw_state(wifi_rfkill,
@@ -369,18 +393,19 @@ static int __init hp_wmi_input_setup(void)
set_bit(EV_KEY, hp_wmi_input_dev->evbit);
set_bit(key->keycode, hp_wmi_input_dev->keybit);
break;
- case KE_SW:
- set_bit(EV_SW, hp_wmi_input_dev->evbit);
- set_bit(key->keycode, hp_wmi_input_dev->swbit);
-
- /* Set initial dock state */
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
}
+ set_bit(EV_SW, hp_wmi_input_dev->evbit);
+ set_bit(SW_DOCK, hp_wmi_input_dev->swbit);
+ set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
+
+ /* Set initial hardware state */
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
+
err = input_register_device(hp_wmi_input_dev);
if (err) {
@@ -397,6 +422,7 @@ static void cleanup_sysfs(struct platform_device *device)
device_remove_file(&device->dev, &dev_attr_hddtemp);
device_remove_file(&device->dev, &dev_attr_als);
device_remove_file(&device->dev, &dev_attr_dock);
+ device_remove_file(&device->dev, &dev_attr_tablet);
}
static int __init hp_wmi_bios_setup(struct platform_device *device)
@@ -416,6 +442,9 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
err = device_create_file(&device->dev, &dev_attr_dock);
if (err)
goto add_sysfs_error;
+ err = device_create_file(&device->dev, &dev_attr_tablet);
+ if (err)
+ goto add_sysfs_error;
if (wireless & 0x1) {
wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
@@ -485,23 +514,17 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
static int hp_wmi_resume_handler(struct platform_device *device)
{
- struct key_entry *key;
-
/*
- * Docking state may have changed while suspended, so trigger
- * an input event for the current state. As this is a switch,
+ * Hardware state may have changed while suspended, so trigger
+ * input events for the current state. As this is a switch,
* the input layer will only actually pass it on if the state
* changed.
*/
- for (key = hp_wmi_keymap; key->type != KE_END; key++) {
- switch (key->type) {
- case KE_SW:
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
- }
- }
+
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
return 0;
}
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 40d64c03278c..a463fd72c495 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -22,7 +22,7 @@
*/
#define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020300
+#define TPACPI_SYSFS_VERSION 0x020400
/*
* Changelog:
@@ -257,6 +257,8 @@ static struct {
u32 wan:1;
u32 uwb:1;
u32 fan_ctrl_status_undef:1;
+ u32 second_fan:1;
+ u32 beep_needs_two_args:1;
u32 input_device_registered:1;
u32 platform_drv_registered:1;
u32 platform_drv_attrs_registered:1;
@@ -277,8 +279,10 @@ struct thinkpad_id_data {
char *bios_version_str; /* Something like 1ZET51WW (1.03z) */
char *ec_version_str; /* Something like 1ZHT51WW-1.04a */
- u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */
+ u16 bios_model; /* 1Y = 0x5931, 0 = unknown */
u16 ec_model;
+ u16 bios_release; /* 1ZETK1WW = 0x314b, 0 = unknown */
+ u16 ec_release;
char *model_str; /* ThinkPad T43 */
char *nummodel_str; /* 9384A9C for a 9384-A9C model */
@@ -355,6 +359,73 @@ static void tpacpi_log_usertask(const char * const what)
} \
} while (0)
+/*
+ * Quirk handling helpers
+ *
+ * ThinkPad IDs and versions seen in the field so far
+ * are two-characters from the set [0-9A-Z], i.e. base 36.
+ *
+ * We use values well outside that range as specials.
+ */
+
+#define TPACPI_MATCH_ANY 0xffffU
+#define TPACPI_MATCH_UNKNOWN 0U
+
+/* TPID('1', 'Y') == 0x5931 */
+#define TPID(__c1, __c2) (((__c2) << 8) | (__c1))
+
+#define TPACPI_Q_IBM(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+#define TPACPI_Q_LNV(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+struct tpacpi_quirk {
+ unsigned int vendor;
+ u16 bios;
+ u16 ec;
+ unsigned long quirks;
+};
+
+/**
+ * tpacpi_check_quirks() - search BIOS/EC version on a list
+ * @qlist: array of &struct tpacpi_quirk
+ * @qlist_size: number of elements in @qlist
+ *
+ * Iterates over a quirks list until one is found that matches the
+ * ThinkPad's vendor, BIOS and EC model.
+ *
+ * Returns 0 if nothing matches, otherwise returns the quirks field of
+ * the matching &struct tpacpi_quirk entry.
+ *
+ * The match criteria is: vendor, ec and bios much match.
+ */
+static unsigned long __init tpacpi_check_quirks(
+ const struct tpacpi_quirk *qlist,
+ unsigned int qlist_size)
+{
+ while (qlist_size) {
+ if ((qlist->vendor == thinkpad_id.vendor ||
+ qlist->vendor == TPACPI_MATCH_ANY) &&
+ (qlist->bios == thinkpad_id.bios_model ||
+ qlist->bios == TPACPI_MATCH_ANY) &&
+ (qlist->ec == thinkpad_id.ec_model ||
+ qlist->ec == TPACPI_MATCH_ANY))
+ return qlist->quirks;
+
+ qlist_size--;
+ qlist++;
+ }
+ return 0;
+}
+
+
/****************************************************************************
****************************************************************************
*
@@ -2880,7 +2951,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
/* update bright_acpimode... */
tpacpi_check_std_acpi_brightness_support();
- if (tp_features.bright_acpimode) {
+ if (tp_features.bright_acpimode && acpi_video_backlight_support()) {
printk(TPACPI_INFO
"This ThinkPad has standard ACPI backlight "
"brightness control, supported by the ACPI "
@@ -4773,7 +4844,7 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */
"LED", /* all others */
); /* R30, R31 */
-#define TPACPI_LED_NUMLEDS 8
+#define TPACPI_LED_NUMLEDS 16
static struct tpacpi_led_classdev *tpacpi_leds;
static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
@@ -4786,15 +4857,20 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
"tpacpi::dock_batt",
"tpacpi::unknown_led",
"tpacpi::standby",
+ "tpacpi::dock_status1",
+ "tpacpi::dock_status2",
+ "tpacpi::unknown_led2",
+ "tpacpi::unknown_led3",
+ "tpacpi::thinkvantage",
};
-#define TPACPI_SAFE_LEDS 0x0081U
+#define TPACPI_SAFE_LEDS 0x1081U
static inline bool tpacpi_is_led_restricted(const unsigned int led)
{
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
return false;
#else
- return (TPACPI_SAFE_LEDS & (1 << led)) == 0;
+ return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
#endif
}
@@ -4956,6 +5032,10 @@ static int __init tpacpi_init_led(unsigned int led)
tpacpi_leds[led].led = led;
+ /* LEDs with no name don't get registered */
+ if (!tpacpi_led_names[led])
+ return 0;
+
tpacpi_leds[led].led_classdev.brightness_set = &led_sysfs_set;
tpacpi_leds[led].led_classdev.blink_set = &led_sysfs_blink_set;
if (led_supported == TPACPI_LED_570)
@@ -4974,10 +5054,59 @@ static int __init tpacpi_init_led(unsigned int led)
return rc;
}
+static const struct tpacpi_quirk led_useful_qtable[] __initconst = {
+ TPACPI_Q_IBM('1', 'E', 0x009f), /* A30 */
+ TPACPI_Q_IBM('1', 'N', 0x009f), /* A31 */
+ TPACPI_Q_IBM('1', 'G', 0x009f), /* A31 */
+
+ TPACPI_Q_IBM('1', 'I', 0x0097), /* T30 */
+ TPACPI_Q_IBM('1', 'R', 0x0097), /* T40, T41, T42, R50, R51 */
+ TPACPI_Q_IBM('7', '0', 0x0097), /* T43, R52 */
+ TPACPI_Q_IBM('1', 'Y', 0x0097), /* T43 */
+ TPACPI_Q_IBM('1', 'W', 0x0097), /* R50e */
+ TPACPI_Q_IBM('1', 'V', 0x0097), /* R51 */
+ TPACPI_Q_IBM('7', '8', 0x0097), /* R51e */
+ TPACPI_Q_IBM('7', '6', 0x0097), /* R52 */
+
+ TPACPI_Q_IBM('1', 'K', 0x00bf), /* X30 */
+ TPACPI_Q_IBM('1', 'Q', 0x00bf), /* X31, X32 */
+ TPACPI_Q_IBM('1', 'U', 0x00bf), /* X40 */
+ TPACPI_Q_IBM('7', '4', 0x00bf), /* X41 */
+ TPACPI_Q_IBM('7', '5', 0x00bf), /* X41t */
+
+ TPACPI_Q_IBM('7', '9', 0x1f97), /* T60 (1) */
+ TPACPI_Q_IBM('7', '7', 0x1f97), /* Z60* (1) */
+ TPACPI_Q_IBM('7', 'F', 0x1f97), /* Z61* (1) */
+ TPACPI_Q_IBM('7', 'B', 0x1fb7), /* X60 (1) */
+
+ /* (1) - may have excess leds enabled on MSB */
+
+ /* Defaults (order matters, keep last, don't reorder!) */
+ { /* Lenovo */
+ .vendor = PCI_VENDOR_ID_LENOVO,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x1fffU,
+ },
+ { /* IBM ThinkPads with no EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_UNKNOWN,
+ .quirks = 0x00ffU,
+ },
+ { /* IBM ThinkPads with EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x00bfU,
+ },
+};
+
+#undef TPACPI_LEDQ_IBM
+#undef TPACPI_LEDQ_LNV
+
static int __init led_init(struct ibm_init_struct *iibm)
{
unsigned int i;
int rc;
+ unsigned long useful_leds;
vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
@@ -4999,6 +5128,9 @@ static int __init led_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
str_supported(led_supported), led_supported);
+ if (led_supported == TPACPI_LED_NONE)
+ return 1;
+
tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
GFP_KERNEL);
if (!tpacpi_leds) {
@@ -5006,8 +5138,12 @@ static int __init led_init(struct ibm_init_struct *iibm)
return -ENOMEM;
}
+ useful_leds = tpacpi_check_quirks(led_useful_qtable,
+ ARRAY_SIZE(led_useful_qtable));
+
for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
- if (!tpacpi_is_led_restricted(i)) {
+ if (!tpacpi_is_led_restricted(i) &&
+ test_bit(i, &useful_leds)) {
rc = tpacpi_init_led(i);
if (rc < 0) {
led_exit();
@@ -5017,12 +5153,11 @@ static int __init led_init(struct ibm_init_struct *iibm)
}
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
- if (led_supported != TPACPI_LED_NONE)
- printk(TPACPI_NOTICE
- "warning: userspace override of important "
- "firmware LEDs is enabled\n");
+ printk(TPACPI_NOTICE
+ "warning: userspace override of important "
+ "firmware LEDs is enabled\n");
#endif
- return (led_supported != TPACPI_LED_NONE)? 0 : 1;
+ return 0;
}
#define str_led_status(s) \
@@ -5052,7 +5187,7 @@ static int led_read(char *p)
}
len += sprintf(p + len, "commands:\t"
- "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
+ "<led> on, <led> off, <led> blink (<led> is 0-15)\n");
return len;
}
@@ -5067,7 +5202,7 @@ static int led_write(char *buf)
return -ENODEV;
while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
+ if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 15)
return -EINVAL;
if (strstr(cmd, "off")) {
@@ -5101,8 +5236,17 @@ static struct ibm_struct led_driver_data = {
TPACPI_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
+#define TPACPI_BEEP_Q1 0x0001
+
+static const struct tpacpi_quirk beep_quirk_table[] __initconst = {
+ TPACPI_Q_IBM('I', 'M', TPACPI_BEEP_Q1), /* 570 */
+ TPACPI_Q_IBM('I', 'U', TPACPI_BEEP_Q1), /* 570E - unverified */
+};
+
static int __init beep_init(struct ibm_init_struct *iibm)
{
+ unsigned long quirks;
+
vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n");
TPACPI_ACPIHANDLE_INIT(beep);
@@ -5110,6 +5254,11 @@ static int __init beep_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n",
str_supported(beep_handle != NULL));
+ quirks = tpacpi_check_quirks(beep_quirk_table,
+ ARRAY_SIZE(beep_quirk_table));
+
+ tp_features.beep_needs_two_args = !!(quirks & TPACPI_BEEP_Q1);
+
return (beep_handle)? 0 : 1;
}
@@ -5141,8 +5290,15 @@ static int beep_write(char *buf)
/* beep_cmd set */
} else
return -EINVAL;
- if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
- return -EIO;
+ if (tp_features.beep_needs_two_args) {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vdd",
+ beep_cmd, 0))
+ return -EIO;
+ } else {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vd",
+ beep_cmd))
+ return -EIO;
+ }
}
return 0;
@@ -5569,6 +5725,10 @@ static struct ibm_struct ecdump_driver_data = {
* Bit 3-0: backlight brightness level
*
* brightness_get_raw returns status data in the HBRV layout
+ *
+ * WARNING: The X61 has been verified to use HBRV for something else, so
+ * this should be used _only_ on IBM ThinkPads, and maybe with some careful
+ * testing on the very early *60 Lenovo models...
*/
enum {
@@ -5869,6 +6029,12 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
brightness_mode);
}
+ /* Safety */
+ if (thinkpad_id.vendor != PCI_VENDOR_ID_IBM &&
+ (brightness_mode == TPACPI_BRGHT_MODE_ECNVRAM ||
+ brightness_mode == TPACPI_BRGHT_MODE_EC))
+ return -EINVAL;
+
if (tpacpi_brightness_get_raw(&b) < 0)
return 1;
@@ -6161,6 +6327,21 @@ static struct ibm_struct volume_driver_data = {
* For firmware bugs, refer to:
* http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
*
+ * ----
+ *
+ * ThinkPad EC register 0x31 bit 0 (only on select models)
+ *
+ * When bit 0 of EC register 0x31 is zero, the tachometer registers
+ * show the speed of the main fan. When bit 0 of EC register 0x31
+ * is one, the tachometer registers show the speed of the auxiliary
+ * fan.
+ *
+ * Fan control seems to affect both fans, regardless of the state
+ * of this bit.
+ *
+ * So far, only the firmware for the X60/X61 non-tablet versions
+ * seem to support this (firmware TP-7M).
+ *
* TPACPI_FAN_WR_ACPI_FANS:
* ThinkPad X31, X40, X41. Not available in the X60.
*
@@ -6187,6 +6368,8 @@ enum { /* Fan control constants */
fan_status_offset = 0x2f, /* EC register 0x2f */
fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
* 0x84 must be read before 0x85 */
+ fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M)
+ bit 0 selects which fan is active */
TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */
TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */
@@ -6249,30 +6432,18 @@ TPACPI_HANDLE(sfan, ec, "SFAN", /* 570 */
* We assume 0x07 really means auto mode while this quirk is active,
* as this is far more likely than the ThinkPad being in level 7,
* which is only used by the firmware during thermal emergencies.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e), TP-76 (R52),
+ * TP-70 (T43, R52), which are known to be buggy.
*/
-static void fan_quirk1_detect(void)
+static void fan_quirk1_setup(void)
{
- /* In some ThinkPads, neither the EC nor the ACPI
- * DSDT initialize the HFSP register, and it ends up
- * being initially set to 0x07 when it *could* be
- * either 0x07 or 0x80.
- *
- * Enable for TP-1Y (T43), TP-78 (R51e),
- * TP-76 (R52), TP-70 (T43, R52), which are known
- * to be buggy. */
if (fan_control_initial_status == 0x07) {
- switch (thinkpad_id.ec_model) {
- case 0x5931: /* TP-1Y */
- case 0x3837: /* TP-78 */
- case 0x3637: /* TP-76 */
- case 0x3037: /* TP-70 */
- printk(TPACPI_NOTICE
- "fan_init: initial fan status is unknown, "
- "assuming it is in auto mode\n");
- tp_features.fan_ctrl_status_undef = 1;
- ;;
- }
+ printk(TPACPI_NOTICE
+ "fan_init: initial fan status is unknown, "
+ "assuming it is in auto mode\n");
+ tp_features.fan_ctrl_status_undef = 1;
}
}
@@ -6292,6 +6463,38 @@ static void fan_quirk1_handle(u8 *fan_status)
}
}
+/* Select main fan on X60/X61, NOOP on others */
+static bool fan_select_fan1(void)
+{
+ if (tp_features.second_fan) {
+ u8 val;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val &= 0xFEU;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+ }
+ return true;
+}
+
+/* Select secondary fan on X60/X61 */
+static bool fan_select_fan2(void)
+{
+ u8 val;
+
+ if (!tp_features.second_fan)
+ return false;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val |= 0x01U;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+
+ return true;
+}
+
/*
* Call with fan_mutex held
*/
@@ -6369,6 +6572,8 @@ static int fan_get_speed(unsigned int *speed)
switch (fan_status_access_mode) {
case TPACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan1()))
+ return -EIO;
if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
!acpi_ec_read(fan_rpm_offset + 1, &hi)))
return -EIO;
@@ -6385,6 +6590,34 @@ static int fan_get_speed(unsigned int *speed)
return 0;
}
+static int fan2_get_speed(unsigned int *speed)
+{
+ u8 hi, lo;
+ bool rc;
+
+ switch (fan_status_access_mode) {
+ case TPACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan2()))
+ return -EIO;
+ rc = !acpi_ec_read(fan_rpm_offset, &lo) ||
+ !acpi_ec_read(fan_rpm_offset + 1, &hi);
+ fan_select_fan1(); /* play it safe */
+ if (rc)
+ return -EIO;
+
+ if (likely(speed))
+ *speed = (hi << 8) | lo;
+
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
static int fan_set_level(int level)
{
if (!fan_control_allowed)
@@ -6790,6 +7023,25 @@ static struct device_attribute dev_attr_fan_fan1_input =
__ATTR(fan1_input, S_IRUGO,
fan_fan1_input_show, NULL);
+/* sysfs fan fan2_input ------------------------------------------------ */
+static ssize_t fan_fan2_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res;
+ unsigned int speed;
+
+ res = fan2_get_speed(&speed);
+ if (res < 0)
+ return res;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan2_input =
+ __ATTR(fan2_input, S_IRUGO,
+ fan_fan2_input_show, NULL);
+
/* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
char *buf)
@@ -6823,6 +7075,7 @@ static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO,
static struct attribute *fan_attributes[] = {
&dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
&dev_attr_fan_fan1_input.attr,
+ NULL, /* for fan2_input */
NULL
};
@@ -6830,9 +7083,36 @@ static const struct attribute_group fan_attr_group = {
.attrs = fan_attributes,
};
+#define TPACPI_FAN_Q1 0x0001 /* Unitialized HFSP */
+#define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */
+
+#define TPACPI_FAN_QI(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+#define TPACPI_FAN_QL(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
+ TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1),
+ TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN),
+};
+
+#undef TPACPI_FAN_QL
+#undef TPACPI_FAN_QI
+
static int __init fan_init(struct ibm_init_struct *iibm)
{
int rc;
+ unsigned long quirks;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
"initializing fan subdriver\n");
@@ -6843,12 +7123,16 @@ static int __init fan_init(struct ibm_init_struct *iibm)
fan_control_commands = 0;
fan_watchdog_maxinterval = 0;
tp_features.fan_ctrl_status_undef = 0;
+ tp_features.second_fan = 0;
fan_control_desired_level = 7;
TPACPI_ACPIHANDLE_INIT(fans);
TPACPI_ACPIHANDLE_INIT(gfan);
TPACPI_ACPIHANDLE_INIT(sfan);
+ quirks = tpacpi_check_quirks(fan_quirk_table,
+ ARRAY_SIZE(fan_quirk_table));
+
if (gfan_handle) {
/* 570, 600e/x, 770e, 770x */
fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
@@ -6858,7 +7142,13 @@ static int __init fan_init(struct ibm_init_struct *iibm)
if (likely(acpi_ec_read(fan_status_offset,
&fan_control_initial_status))) {
fan_status_access_mode = TPACPI_FAN_RD_TPEC;
- fan_quirk1_detect();
+ if (quirks & TPACPI_FAN_Q1)
+ fan_quirk1_setup();
+ if (quirks & TPACPI_FAN_2FAN) {
+ tp_features.second_fan = 1;
+ dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
+ "secondary fan support enabled\n");
+ }
} else {
printk(TPACPI_ERR
"ThinkPad ACPI EC access misbehaving, "
@@ -6914,6 +7204,11 @@ static int __init fan_init(struct ibm_init_struct *iibm)
if (fan_status_access_mode != TPACPI_FAN_NONE ||
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+ if (tp_features.second_fan) {
+ /* attach second fan tachometer */
+ fan_attributes[ARRAY_SIZE(fan_attributes)-2] =
+ &dev_attr_fan_fan2_input.attr;
+ }
rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
if (rc < 0)
@@ -7385,6 +7680,24 @@ err_out:
/* Probing */
+static bool __pure __init tpacpi_is_fw_digit(const char c)
+{
+ return (c >= '0' && c <= '9') || (c >= 'A' && c <= 'Z');
+}
+
+/* Most models: xxyTkkWW (#.##c); Ancient 570/600 and -SL lacks (#.##c) */
+static bool __pure __init tpacpi_is_valid_fw_id(const char* const s,
+ const char t)
+{
+ return s && strlen(s) >= 8 &&
+ tpacpi_is_fw_digit(s[0]) &&
+ tpacpi_is_fw_digit(s[1]) &&
+ s[2] == t && s[3] == 'T' &&
+ tpacpi_is_fw_digit(s[4]) &&
+ tpacpi_is_fw_digit(s[5]) &&
+ s[6] == 'W' && s[7] == 'W';
+}
+
/* returns 0 - probe ok, or < 0 - probe error.
* Probe ok doesn't mean thinkpad found.
* On error, kfree() cleanup on tp->* is not performed, caller must do it */
@@ -7411,10 +7724,15 @@ static int __must_check __init get_thinkpad_model_data(
tp->bios_version_str = kstrdup(s, GFP_KERNEL);
if (s && !tp->bios_version_str)
return -ENOMEM;
- if (!tp->bios_version_str)
+
+ /* Really ancient ThinkPad 240X will fail this, which is fine */
+ if (!tpacpi_is_valid_fw_id(tp->bios_version_str, 'E'))
return 0;
+
tp->bios_model = tp->bios_version_str[0]
| (tp->bios_version_str[1] << 8);
+ tp->bios_release = (tp->bios_version_str[4] << 8)
+ | tp->bios_version_str[5];
/*
* ThinkPad T23 or newer, A31 or newer, R50e or newer,
@@ -7433,8 +7751,21 @@ static int __must_check __init get_thinkpad_model_data(
tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
if (!tp->ec_version_str)
return -ENOMEM;
- tp->ec_model = ec_fw_string[0]
- | (ec_fw_string[1] << 8);
+
+ if (tpacpi_is_valid_fw_id(ec_fw_string, 'H')) {
+ tp->ec_model = ec_fw_string[0]
+ | (ec_fw_string[1] << 8);
+ tp->ec_release = (ec_fw_string[4] << 8)
+ | ec_fw_string[5];
+ } else {
+ printk(TPACPI_NOTICE
+ "ThinkPad firmware release %s "
+ "doesn't match the known patterns\n",
+ ec_fw_string);
+ printk(TPACPI_NOTICE
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ }
break;
}
}
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 7f207f335bec..ef3a2cd3a7a0 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -287,6 +287,25 @@ static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
ACPI_DECODE_16);
}
+static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
+ struct acpi_resource *res)
+{
+ struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
+
+ if (p->producer_consumer == ACPI_PRODUCER)
+ return;
+
+ if (p->resource_type == ACPI_MEMORY_RANGE)
+ pnpacpi_parse_allocated_memresource(dev,
+ p->minimum, p->address_length,
+ p->info.mem.write_protect);
+ else if (p->resource_type == ACPI_IO_RANGE)
+ pnpacpi_parse_allocated_ioresource(dev,
+ p->minimum, p->address_length,
+ p->granularity == 0xfff ? ACPI_DECODE_10 :
+ ACPI_DECODE_16);
+}
+
static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
void *data)
{
@@ -400,8 +419,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
break;
case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
- if (res->data.ext_address64.producer_consumer == ACPI_PRODUCER)
- return AE_OK;
+ pnpacpi_parse_allocated_ext_address_space(dev, res);
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
@@ -630,6 +648,28 @@ static __init void pnpacpi_parse_address_option(struct pnp_dev *dev,
IORESOURCE_IO_FIXED);
}
+static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
+ unsigned int option_flags,
+ struct acpi_resource *r)
+{
+ struct acpi_resource_extended_address64 *p = &r->data.ext_address64;
+ unsigned char flags = 0;
+
+ if (p->address_length == 0)
+ return;
+
+ if (p->resource_type == ACPI_MEMORY_RANGE) {
+ if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
+ flags = IORESOURCE_MEM_WRITEABLE;
+ pnp_register_mem_resource(dev, option_flags, p->minimum,
+ p->minimum, 0, p->address_length,
+ flags);
+ } else if (p->resource_type == ACPI_IO_RANGE)
+ pnp_register_port_resource(dev, option_flags, p->minimum,
+ p->minimum, 0, p->address_length,
+ IORESOURCE_IO_FIXED);
+}
+
struct acpipnp_parse_option_s {
struct pnp_dev *dev;
unsigned int option_flags;
@@ -711,6 +751,7 @@ static __init acpi_status pnpacpi_option_resource(struct acpi_resource *res,
break;
case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
+ pnpacpi_parse_ext_address_option(dev, option_flags, res);
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
@@ -765,6 +806,7 @@ static int pnpacpi_supported_resource(struct acpi_resource *res)
case ACPI_RESOURCE_TYPE_ADDRESS16:
case ACPI_RESOURCE_TYPE_ADDRESS32:
case ACPI_RESOURCE_TYPE_ADDRESS64:
+ case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
return 1;
}