diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ssb/driver_pcicore.c | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 15a7ee3859dd..5fe1c22e289b 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -359,12 +359,13 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) /* * Accessing PCI config without a proper delay after devices reset (not - * GPIO reset) was causing reboots on WRT300N v1.0. + * GPIO reset) was causing reboots on WRT300N v1.0 (BCM4704). * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it * completely. Flushing all writes was also tested but with no luck. + * The same problem was reported for WRT350N v1 (BCM4705), so we just + * sleep here unconditionally. */ - if (pc->dev->bus->chip_id == 0x4704) - usleep_range(1000, 2000); + usleep_range(1000, 2000); /* Enable PCI bridge BAR0 prefetch and burst */ val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; |