summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/common.h5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000.h2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c99
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h34
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c12
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c4
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c42
8 files changed, 156 insertions, 44 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index bac0e44d7634..586a33624dd2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -27,6 +27,7 @@
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
+#include <linux/stmmac.h>
#include <linux/phy.h>
#include <linux/module.h>
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
@@ -378,7 +379,9 @@ struct stmmac_dma_ops {
/* DMA core initialization */
int (*reset)(void __iomem *ioaddr);
void (*init)(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds);
+ int aal, u32 dma_tx, u32 dma_rx, int atds);
+ /* Configure the AXI Bus Mode Register */
+ void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
/* Dump DMA registers */
void (*dump_regs) (void __iomem *ioaddr);
/* Set tx/rx threshold in the csr6 register
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index 9d36ae788429..b0593a4268ee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -240,7 +240,7 @@ enum rx_tx_priority_ratio {
#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */
#define DMA_BUS_MODE_RPBL_SHIFT 17
#define DMA_BUS_MODE_USP 0x00800000
-#define DMA_BUS_MODE_PBL 0x01000000
+#define DMA_BUS_MODE_MAXPBL 0x01000000
#define DMA_BUS_MODE_AAL 0x02000000
/* DMA CRS Control and Status Register Mapping */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 5f0aea56b298..da32d6037e3e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -30,24 +30,76 @@
#include "dwmac1000.h"
#include "dwmac_dma.h"
+static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
+{
+ u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
+ int i;
+
+ pr_info("dwmac1000: Master AXI performs %s burst length\n",
+ !(value & DMA_AXI_UNDEF) ? "fixed" : "any");
+
+ if (axi->axi_lpi_en)
+ value |= DMA_AXI_EN_LPI;
+ if (axi->axi_xit_frm)
+ value |= DMA_AXI_LPI_XIT_FRM;
+
+ value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) <<
+ DMA_AXI_WR_OSR_LMT_SHIFT;
+
+ value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) <<
+ DMA_AXI_RD_OSR_LMT_SHIFT;
+
+ /* Depending on the UNDEF bit the Master AXI will perform any burst
+ * length according to the BLEN programmed (by default all BLEN are
+ * set).
+ */
+ for (i = 0; i < AXI_BLEN; i++) {
+ switch (axi->axi_blen[i]) {
+ case 256:
+ value |= DMA_AXI_BLEN256;
+ break;
+ case 128:
+ value |= DMA_AXI_BLEN128;
+ break;
+ case 64:
+ value |= DMA_AXI_BLEN64;
+ break;
+ case 32:
+ value |= DMA_AXI_BLEN32;
+ break;
+ case 16:
+ value |= DMA_AXI_BLEN16;
+ break;
+ case 8:
+ value |= DMA_AXI_BLEN8;
+ break;
+ case 4:
+ value |= DMA_AXI_BLEN4;
+ break;
+ }
+ }
+
+ writel(value, ioaddr + DMA_AXI_BUS_MODE);
+}
+
static void dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
+ int aal, u32 dma_tx, u32 dma_rx, int atds)
{
- u32 value;
+ u32 value = readl(ioaddr + DMA_BUS_MODE);
/*
- * Set the DMA PBL (Programmable Burst Length) mode
- * Before stmmac core 3.50 this mode bit was 4xPBL, and
+ * Set the DMA PBL (Programmable Burst Length) mode.
+ *
+ * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
* post 3.5 mode bit acts as 8*PBL.
- * For core rev < 3.5, when the core is set for 4xPBL mode, the
- * DMA transfers the data in 4, 8, 16, 32, 64 & 128 beats
- * depending on pbl value.
- * For core rev > 3.5, when the core is set for 8xPBL mode, the
- * DMA transfers the data in 8, 16, 32, 64, 128 & 256 beats
- * depending on pbl value.
+ *
+ * This configuration doesn't take care about the Separate PBL
+ * so only the bits: 13-8 are programmed with the PBL passed from the
+ * platform.
*/
- value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
- (pbl << DMA_BUS_MODE_RPBL_SHIFT));
+ value |= DMA_BUS_MODE_MAXPBL;
+ value &= ~DMA_BUS_MODE_PBL_MASK;
+ value |= (pbl << DMA_BUS_MODE_PBL_SHIFT);
/* Set the Fixed burst mode */
if (fb)
@@ -60,26 +112,10 @@ static void dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
if (atds)
value |= DMA_BUS_MODE_ATDS;
- writel(value, ioaddr + DMA_BUS_MODE);
+ if (aal)
+ value |= DMA_BUS_MODE_AAL;
- /* In case of GMAC AXI configuration, program the DMA_AXI_BUS_MODE
- * for supported bursts.
- *
- * Note: This is applicable only for revision GMACv3.61a. For
- * older version this register is reserved and shall have no
- * effect.
- *
- * Note:
- * For Fixed Burst Mode: if we directly write 0xFF to this
- * register using the configurations pass from platform code,
- * this would ensure that all bursts supported by core are set
- * and those which are not supported would remain ineffective.
- *
- * For Non Fixed Burst Mode: provide the maximum value of the
- * burst length. Any burst equal or below the provided burst
- * length would be allowed to perform.
- */
- writel(burst_len, ioaddr + DMA_AXI_BUS_MODE);
+ writel(value, ioaddr + DMA_BUS_MODE);
/* Mask interrupts by writing to CSR7 */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
@@ -192,6 +228,7 @@ static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt)
const struct stmmac_dma_ops dwmac1000_dma_ops = {
.reset = dwmac_dma_reset,
.init = dwmac1000_dma_init,
+ .axi = dwmac1000_dma_axi,
.dump_regs = dwmac1000_dump_dma_regs,
.dma_mode = dwmac1000_dma_operation_mode,
.enable_dma_transmission = dwmac_enable_dma_transmission,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index c40582a938a4..61f54c99a7de 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -33,7 +33,7 @@
#include "dwmac_dma.h"
static void dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
+ int aal, u32 dma_tx, u32 dma_rx, int atds)
{
/* Enable Application Access by writing to DMA CSR0 */
writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
index 13ca90e23479..726d9d9aaf83 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -41,8 +41,40 @@
/* Rx watchdog register */
#define DMA_RX_WATCHDOG 0x00001024
-/* AXI Bus Mode */
+
+/* AXI Master Bus Mode */
#define DMA_AXI_BUS_MODE 0x00001028
+
+#define DMA_AXI_EN_LPI BIT(31)
+#define DMA_AXI_LPI_XIT_FRM BIT(30)
+#define DMA_AXI_WR_OSR_LMT GENMASK(23, 20)
+#define DMA_AXI_WR_OSR_LMT_SHIFT 20
+#define DMA_AXI_WR_OSR_LMT_MASK 0xf
+#define DMA_AXI_RD_OSR_LMT GENMASK(19, 16)
+#define DMA_AXI_RD_OSR_LMT_SHIFT 16
+#define DMA_AXI_RD_OSR_LMT_MASK 0xf
+
+#define DMA_AXI_OSR_MAX 0xf
+#define DMA_AXI_MAX_OSR_LIMIT ((DMA_AXI_OSR_MAX << DMA_AXI_WR_OSR_LMT_SHIFT) | \
+ (DMA_AXI_OSR_MAX << DMA_AXI_RD_OSR_LMT_SHIFT))
+#define DMA_AXI_1KBBE BIT(13)
+#define DMA_AXI_AAL BIT(12)
+#define DMA_AXI_BLEN256 BIT(7)
+#define DMA_AXI_BLEN128 BIT(6)
+#define DMA_AXI_BLEN64 BIT(5)
+#define DMA_AXI_BLEN32 BIT(4)
+#define DMA_AXI_BLEN16 BIT(3)
+#define DMA_AXI_BLEN8 BIT(2)
+#define DMA_AXI_BLEN4 BIT(1)
+#define DMA_BURST_LEN_DEFAULT (DMA_AXI_BLEN256 | DMA_AXI_BLEN128 | \
+ DMA_AXI_BLEN64 | DMA_AXI_BLEN32 | \
+ DMA_AXI_BLEN16 | DMA_AXI_BLEN8 | \
+ DMA_AXI_BLEN4)
+
+#define DMA_AXI_UNDEF BIT(0)
+
+#define DMA_AXI_BURST_LEN_MASK 0x000000FE
+
#define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */
#define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */
#define DMA_HW_FEATURE 0x00001058 /* HW Feature Register */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 13752e933e43..89c26268822e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1635,7 +1635,7 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
*/
static int stmmac_init_dma_engine(struct stmmac_priv *priv)
{
- int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_len = 0;
+ int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, aal = 0;
int mixed_burst = 0;
int atds = 0;
int ret = 0;
@@ -1644,7 +1644,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
pbl = priv->plat->dma_cfg->pbl;
fixed_burst = priv->plat->dma_cfg->fixed_burst;
mixed_burst = priv->plat->dma_cfg->mixed_burst;
- burst_len = priv->plat->dma_cfg->burst_len;
+ aal = priv->plat->dma_cfg->aal;
}
if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
@@ -1657,8 +1657,12 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
}
priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
- burst_len, priv->dma_tx_phy,
- priv->dma_rx_phy, atds);
+ aal, priv->dma_tx_phy, priv->dma_rx_phy, atds);
+
+ if ((priv->synopsys_id >= DWMAC_CORE_3_50) &&
+ (priv->plat->axi && priv->hw->dma->axi))
+ priv->hw->dma->axi(priv->ioaddr, priv->plat->axi);
+
return ret;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index d71a721ea61c..ae4388735b7f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -81,7 +81,7 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat)
plat->mdio_bus_data->phy_mask = 0;
plat->dma_cfg->pbl = 32;
- plat->dma_cfg->burst_len = DMA_AXI_BLEN_256;
+ /* TODO: AXI */
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
@@ -115,8 +115,8 @@ static int quark_default_data(struct plat_stmmacenet_data *plat,
plat->mdio_bus_data->phy_mask = 0;
plat->dma_cfg->pbl = 16;
- plat->dma_cfg->burst_len = DMA_AXI_BLEN_256;
plat->dma_cfg->fixed_burst = 1;
+ /* AXI (TODO) */
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 6a52fa18cbf2..69ccf486d4fa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -96,6 +96,42 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries)
}
/**
+ * stmmac_axi_setup - parse DT parameters for programming the AXI register
+ * @pdev: platform device
+ * @priv: driver private struct.
+ * Description:
+ * if required, from device-tree the AXI internal register can be tuned
+ * by using platform parameters.
+ */
+static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev)
+{
+ struct device_node *np;
+ struct stmmac_axi *axi;
+
+ np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0);
+ if (!np)
+ return NULL;
+
+ axi = kzalloc(sizeof(axi), GFP_KERNEL);
+ if (!axi)
+ return ERR_PTR(-ENOMEM);
+
+ axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en");
+ axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm");
+ axi->axi_kbbe = of_property_read_bool(np, "snps,axi_kbbe");
+ axi->axi_axi_all = of_property_read_bool(np, "snps,axi_all");
+ axi->axi_fb = of_property_read_bool(np, "snps,axi_fb");
+ axi->axi_mb = of_property_read_bool(np, "snps,axi_mb");
+ axi->axi_rb = of_property_read_bool(np, "snps,axi_rb");
+
+ of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt);
+ of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt);
+ of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN);
+
+ return axi;
+}
+
+/**
* stmmac_probe_config_dt - parse device-tree driver parameters
* @pdev: platform_device structure
* @plat: driver data platform structure
@@ -216,13 +252,11 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
}
plat->dma_cfg = dma_cfg;
of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
+ dma_cfg->aal = of_property_read_bool(np, "snps,aal");
dma_cfg->fixed_burst =
of_property_read_bool(np, "snps,fixed-burst");
dma_cfg->mixed_burst =
of_property_read_bool(np, "snps,mixed-burst");
- of_property_read_u32(np, "snps,burst_len", &dma_cfg->burst_len);
- if (dma_cfg->burst_len < 0 || dma_cfg->burst_len > 256)
- dma_cfg->burst_len = 0;
}
plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
if (plat->force_thresh_dma_mode) {
@@ -230,6 +264,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
pr_warn("force_sf_dma_mode is ignored if force_thresh_dma_mode is set.");
}
+ plat->axi = stmmac_axi_setup(pdev);
+
return plat;
}
#else
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 04:20:16 +0000