diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/regulator/bd71837-regulator.c | 19 | ||||
| -rw-r--r-- | drivers/regulator/core.c | 4 | ||||
| -rw-r--r-- | drivers/regulator/of_regulator.c | 2 |
3 files changed, 21 insertions, 4 deletions
diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c index 0f8ac8dec3e1..a1bd8aaf4d98 100644 --- a/drivers/regulator/bd71837-regulator.c +++ b/drivers/regulator/bd71837-regulator.c @@ -569,6 +569,25 @@ static int bd71837_probe(struct platform_device *pdev) BD71837_REG_REGLOCK); } + /* + * There is a HW quirk in BD71837. The shutdown sequence timings for + * bucks/LDOs which are controlled via register interface are changed. + * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the + * beginning of shut-down sequence. As bucks 6 and 7 are parent + * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage + * monitoring to errorneously detect under voltage and force PMIC to + * emergency state instead of poweroff. In order to avoid this we + * disable voltage monitoring for LDO5 and LDO6 + */ + err = regmap_update_bits(pmic->mfd->regmap, BD718XX_REG_MVRFLTMASK2, + BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80, + BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80); + if (err) { + dev_err(&pmic->pdev->dev, + "Failed to disable voltage monitoring\n"); + goto err; + } + for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) { struct regulator_desc *desc; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index bb1324f93143..9577d8941846 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3161,7 +3161,7 @@ static inline int regulator_suspend_toggle(struct regulator_dev *rdev, if (!rstate->changeable) return -EPERM; - rstate->enabled = en; + rstate->enabled = (en) ? ENABLE_IN_SUSPEND : DISABLE_IN_SUSPEND; return 0; } @@ -4395,13 +4395,13 @@ regulator_register(const struct regulator_desc *regulator_desc, !rdev->desc->fixed_uV) rdev->is_switch = true; + dev_set_drvdata(&rdev->dev, rdev); ret = device_register(&rdev->dev); if (ret != 0) { put_device(&rdev->dev); goto unset_supplies; } - dev_set_drvdata(&rdev->dev, rdev); rdev_init_debugfs(rdev); /* try to resolve regulators supply since a new one was registered */ diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 638f17d4c848..210fc20f7de7 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -213,8 +213,6 @@ static void of_get_regulation_constraints(struct device_node *np, else if (of_property_read_bool(suspend_np, "regulator-off-in-suspend")) suspend_state->enabled = DISABLE_IN_SUSPEND; - else - suspend_state->enabled = DO_NOTHING_IN_SUSPEND; if (!of_property_read_u32(np, "regulator-suspend-min-microvolt", &pval)) |