diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/regulator/max1586.c | 44 |
1 files changed, 41 insertions, 3 deletions
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c index 3a035ece83c1..8c5a54f541b5 100644 --- a/drivers/regulator/max1586.c +++ b/drivers/regulator/max1586.c @@ -44,6 +44,9 @@ struct max1586_data { unsigned int min_uV; unsigned int max_uV; + unsigned int v3_curr_sel; + unsigned int v6_curr_sel; + struct regulator_dev *rdev[0]; }; @@ -63,31 +66,60 @@ static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 }; * R24 and R25=100kOhm as described in the data sheet. * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm */ +static int max1586_v3_get_voltage_sel(struct regulator_dev *rdev) +{ + struct max1586_data *max1586 = rdev_get_drvdata(rdev); + + return max1586->v3_curr_sel; +} + static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { struct max1586_data *max1586 = rdev_get_drvdata(rdev); struct i2c_client *client = max1586->client; + int ret; u8 v3_prog; dev_dbg(&client->dev, "changing voltage v3 to %dmv\n", regulator_list_voltage_linear(rdev, selector) / 1000); v3_prog = I2C_V3_SELECT | (u8) selector; - return i2c_smbus_write_byte(client, v3_prog); + ret = i2c_smbus_write_byte(client, v3_prog); + if (ret) + return ret; + + max1586->v3_curr_sel = selector; + + return 0; +} + +static int max1586_v6_get_voltage_sel(struct regulator_dev *rdev) +{ + struct max1586_data *max1586 = rdev_get_drvdata(rdev); + + return max1586->v6_curr_sel; } static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev, unsigned int selector) { - struct i2c_client *client = rdev_get_drvdata(rdev); + struct max1586_data *max1586 = rdev_get_drvdata(rdev); + struct i2c_client *client = max1586->client; u8 v6_prog; + int ret; dev_dbg(&client->dev, "changing voltage v6 to %dmv\n", rdev->desc->volt_table[selector] / 1000); v6_prog = I2C_V6_SELECT | (u8) selector; - return i2c_smbus_write_byte(client, v6_prog); + ret = i2c_smbus_write_byte(client, v6_prog); + if (ret) + return ret; + + max1586->v6_curr_sel = selector; + + return 0; } /* @@ -95,12 +127,14 @@ static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev, * the set up value. */ static struct regulator_ops max1586_v3_ops = { + .get_voltage_sel = max1586_v3_get_voltage_sel, .set_voltage_sel = max1586_v3_set_voltage_sel, .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, }; static struct regulator_ops max1586_v6_ops = { + .get_voltage_sel = max1586_v6_get_voltage_sel, .set_voltage_sel = max1586_v6_set_voltage_sel, .list_voltage = regulator_list_voltage_table, }; @@ -148,6 +182,10 @@ static int max1586_pmic_probe(struct i2c_client *client, max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000; max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000; + /* Set curr_sel to default voltage on power-up */ + max1586->v3_curr_sel = 24; /* 1.3V */ + max1586->v6_curr_sel = 0; + rdev = max1586->rdev; for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) { id = pdata->subdevs[i].id; |