summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/chipidea/ci_hdrc_pci.c4
-rw-r--r--drivers/usb/chipidea/debug.c3
-rw-r--r--drivers/usb/core/hub.c8
-rw-r--r--drivers/usb/dwc2/Kconfig1
-rw-r--r--drivers/usb/dwc2/core.c6
-rw-r--r--drivers/usb/dwc2/hcd_ddma.c23
-rw-r--r--drivers/usb/dwc2/hcd_intr.c8
-rw-r--r--drivers/usb/dwc3/core.h1
-rw-r--r--drivers/usb/dwc3/ep0.c5
-rw-r--r--drivers/usb/dwc3/gadget.c70
-rw-r--r--drivers/usb/gadget/legacy/inode.c7
-rw-r--r--drivers/usb/gadget/udc/fsl_qe_udc.c2
-rw-r--r--drivers/usb/gadget/udc/net2280.h15
-rw-r--r--drivers/usb/gadget/udc/udc-core.c3
-rw-r--r--drivers/usb/musb/musb_host.c8
-rw-r--r--drivers/usb/phy/phy-msm-usb.c20
-rw-r--r--drivers/usb/serial/cp210x.c2
-rw-r--r--drivers/usb/serial/option.c9
18 files changed, 125 insertions, 70 deletions
diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c
index b59195edf636..b635ab67490d 100644
--- a/drivers/usb/chipidea/ci_hdrc_pci.c
+++ b/drivers/usb/chipidea/ci_hdrc_pci.c
@@ -85,8 +85,8 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
/* register a nop PHY */
ci->phy = usb_phy_generic_register();
- if (!ci->phy)
- return -ENOMEM;
+ if (IS_ERR(ci->phy))
+ return PTR_ERR(ci->phy);
memset(res, 0, sizeof(res));
res[0].start = pci_resource_start(pdev, 0);
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index a4f7db2e18dd..df47110bad2d 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -100,6 +100,9 @@ static ssize_t ci_port_test_write(struct file *file, const char __user *ubuf,
if (sscanf(buf, "%u", &mode) != 1)
return -EINVAL;
+ if (mode > 255)
+ return -EBADRQC;
+
pm_runtime_get_sync(ci->dev);
spin_lock_irqsave(&ci->lock, flags);
ret = hw_port_test_set(ci, mode);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 350dcd9af5d8..51b436918f78 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5401,6 +5401,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
}
bos = udev->bos;
+ udev->bos = NULL;
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
@@ -5493,11 +5494,8 @@ done:
usb_set_usb2_hardware_lpm(udev, 1);
usb_unlocked_enable_lpm(udev);
usb_enable_ltm(udev);
- /* release the new BOS descriptor allocated by hub_port_init() */
- if (udev->bos != bos) {
- usb_release_bos_descriptor(udev);
- udev->bos = bos;
- }
+ usb_release_bos_descriptor(udev);
+ udev->bos = bos;
return 0;
re_enumerate:
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index fd95ba6ec317..f0decc0d69b5 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -1,5 +1,6 @@
config USB_DWC2
tristate "DesignWare USB2 DRD Core Support"
+ depends on HAS_DMA
depends on USB || USB_GADGET
help
Say Y here if your system has a Dual Role Hi-Speed USB
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index e991d55914db..46c4ba75dc2a 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -619,6 +619,12 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
__func__, hsotg->dr_mode);
break;
}
+
+ /*
+ * NOTE: This is required for some rockchip soc based
+ * platforms.
+ */
+ msleep(50);
}
/*
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
index 36606fc33c0d..a41274aa52ad 100644
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -1174,14 +1174,11 @@ static int dwc2_process_non_isoc_desc(struct dwc2_hsotg *hsotg,
failed = dwc2_update_non_isoc_urb_state_ddma(hsotg, chan, qtd, dma_desc,
halt_status, n_bytes,
xfer_done);
- if (*xfer_done && urb->status != -EINPROGRESS)
- failed = 1;
-
- if (failed) {
+ if (failed || (*xfer_done && urb->status != -EINPROGRESS)) {
dwc2_host_complete(hsotg, qtd, urb->status);
dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
- dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x status=%08x\n",
- failed, *xfer_done, urb->status);
+ dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x\n",
+ failed, *xfer_done);
return failed;
}
@@ -1236,21 +1233,23 @@ static void dwc2_complete_non_isoc_xfer_ddma(struct dwc2_hsotg *hsotg,
list_for_each_safe(qtd_item, qtd_tmp, &qh->qtd_list) {
int i;
+ int qtd_desc_count;
qtd = list_entry(qtd_item, struct dwc2_qtd, qtd_list_entry);
xfer_done = 0;
+ qtd_desc_count = qtd->n_desc;
- for (i = 0; i < qtd->n_desc; i++) {
+ for (i = 0; i < qtd_desc_count; i++) {
if (dwc2_process_non_isoc_desc(hsotg, chan, chnum, qtd,
desc_num, halt_status,
- &xfer_done)) {
- qtd = NULL;
- break;
- }
+ &xfer_done))
+ goto stop_scan;
+
desc_num++;
}
}
+stop_scan:
if (qh->ep_type != USB_ENDPOINT_XFER_CONTROL) {
/*
* Resetting the data toggle for bulk and interrupt endpoints
@@ -1258,7 +1257,7 @@ static void dwc2_complete_non_isoc_xfer_ddma(struct dwc2_hsotg *hsotg,
*/
if (halt_status == DWC2_HC_XFER_STALL)
qh->data_toggle = DWC2_HC_PID_DATA0;
- else if (qtd)
+ else
dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
}
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index f8253803a050..cadba8b13c48 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -525,11 +525,19 @@ void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) {
+ if (WARN(!chan || !chan->qh,
+ "chan->qh must be specified for non-control eps\n"))
+ return;
+
if (pid == TSIZ_SC_MC_PID_DATA0)
chan->qh->data_toggle = DWC2_HC_PID_DATA0;
else
chan->qh->data_toggle = DWC2_HC_PID_DATA1;
} else {
+ if (WARN(!qtd,
+ "qtd must be specified for control eps\n"))
+ return;
+
if (pid == TSIZ_SC_MC_PID_DATA0)
qtd->data_toggle = DWC2_HC_PID_DATA0;
else
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 29130682e547..e4f8b90d9627 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -856,7 +856,6 @@ struct dwc3 {
unsigned pullups_connected:1;
unsigned resize_fifos:1;
unsigned setup_packet_pending:1;
- unsigned start_config_issued:1;
unsigned three_stage_setup:1;
unsigned usb3_lpm_capable:1;
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 3a9354abcb68..8d6b75c2f53b 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -555,7 +555,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
int ret;
u32 reg;
- dwc->start_config_issued = false;
cfg = le16_to_cpu(ctrl->wValue);
switch (state) {
@@ -737,10 +736,6 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
break;
- case USB_REQ_SET_INTERFACE:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE");
- dwc->start_config_issued = false;
- /* Fall through */
default:
dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
ret = dwc3_ep0_delegate_req(dwc, ctrl);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7d1dd82a95ac..2363bad45af8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -385,24 +385,66 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep)
dep->trb_pool_dma = 0;
}
+static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep);
+
+/**
+ * dwc3_gadget_start_config - Configure EP resources
+ * @dwc: pointer to our controller context structure
+ * @dep: endpoint that is being enabled
+ *
+ * The assignment of transfer resources cannot perfectly follow the
+ * data book due to the fact that the controller driver does not have
+ * all knowledge of the configuration in advance. It is given this
+ * information piecemeal by the composite gadget framework after every
+ * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
+ * programming model in this scenario can cause errors. For two
+ * reasons:
+ *
+ * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION
+ * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of
+ * multiple interfaces.
+ *
+ * 2) The databook does not mention doing more DEPXFERCFG for new
+ * endpoint on alt setting (8.1.6).
+ *
+ * The following simplified method is used instead:
+ *
+ * All hardware endpoints can be assigned a transfer resource and this
+ * setting will stay persistent until either a core reset or
+ * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and
+ * do DEPXFERCFG for every hardware endpoint as well. We are
+ * guaranteed that there are as many transfer resources as endpoints.
+ *
+ * This function is called for each endpoint when it is being enabled
+ * but is triggered only when called for EP0-out, which always happens
+ * first, and which should only happen in one of the above conditions.
+ */
static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_gadget_ep_cmd_params params;
u32 cmd;
+ int i;
+ int ret;
+
+ if (dep->number)
+ return 0;
memset(&params, 0x00, sizeof(params));
+ cmd = DWC3_DEPCMD_DEPSTARTCFG;
- if (dep->number != 1) {
- cmd = DWC3_DEPCMD_DEPSTARTCFG;
- /* XferRscIdx == 0 for ep0 and 2 for the remaining */
- if (dep->number > 1) {
- if (dwc->start_config_issued)
- return 0;
- dwc->start_config_issued = true;
- cmd |= DWC3_DEPCMD_PARAM(2);
- }
+ ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (ret)
+ return ret;
- return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+ struct dwc3_ep *dep = dwc->eps[i];
+
+ if (!dep)
+ continue;
+
+ ret = dwc3_gadget_set_xfer_resource(dwc, dep);
+ if (ret)
+ return ret;
}
return 0;
@@ -516,10 +558,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
struct dwc3_trb *trb_st_hw;
struct dwc3_trb *trb_link;
- ret = dwc3_gadget_set_xfer_resource(dwc, dep);
- if (ret)
- return ret;
-
dep->endpoint.desc = desc;
dep->comp_desc = comp_desc;
dep->type = usb_endpoint_type(desc);
@@ -1636,8 +1674,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
- dwc->start_config_issued = false;
-
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
@@ -2237,7 +2273,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
dwc3_disconnect_gadget(dwc);
- dwc->start_config_issued = false;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
@@ -2288,7 +2323,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
dwc3_stop_active_transfers(dwc);
dwc3_clear_stall_all_ep(dwc);
- dwc->start_config_issued = false;
/* Reset device address to zero */
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 7e179f81d05c..87fb0fd6aaab 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -130,7 +130,8 @@ struct dev_data {
setup_can_stall : 1,
setup_out_ready : 1,
setup_out_error : 1,
- setup_abort : 1;
+ setup_abort : 1,
+ gadget_registered : 1;
unsigned setup_wLength;
/* the rest is basically write-once */
@@ -1179,7 +1180,8 @@ dev_release (struct inode *inode, struct file *fd)
/* closing ep0 === shutdown all */
- usb_gadget_unregister_driver (&gadgetfs_driver);
+ if (dev->gadget_registered)
+ usb_gadget_unregister_driver (&gadgetfs_driver);
/* at this point "good" hardware has disconnected the
* device from USB; the host won't see it any more.
@@ -1847,6 +1849,7 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
* kick in after the ep0 descriptor is closed.
*/
value = len;
+ dev->gadget_registered = true;
}
return value;
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
index 53c0692f1b09..93d28cb00b76 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -2340,7 +2340,7 @@ static struct qe_udc *qe_udc_config(struct platform_device *ofdev)
{
struct qe_udc *udc;
struct device_node *np = ofdev->dev.of_node;
- unsigned int tmp_addr = 0;
+ unsigned long tmp_addr = 0;
struct usb_device_para __iomem *usbpram;
unsigned int i;
u64 size;
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
index 4dff60d34f73..0d32052bf16f 100644
--- a/drivers/usb/gadget/udc/net2280.h
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -369,9 +369,20 @@ static inline void set_max_speed(struct net2280_ep *ep, u32 max)
static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80,
0x50, 0x20, 0x70, 0x40, 0x90 };
- if (ep->dev->enhanced_mode)
+ if (ep->dev->enhanced_mode) {
reg = ep_enhanced[ep->num];
- else{
+ switch (ep->dev->gadget.speed) {
+ case USB_SPEED_SUPER:
+ reg += 2;
+ break;
+ case USB_SPEED_FULL:
+ reg += 1;
+ break;
+ case USB_SPEED_HIGH:
+ default:
+ break;
+ }
+ } else {
reg = (ep->num + 1) * 0x10;
if (ep->dev->gadget.speed != USB_SPEED_HIGH)
reg += 1;
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index fd73a3ea07c2..b86a6f03592e 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -413,9 +413,10 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
if (!driver->udc_name || strcmp(driver->udc_name,
dev_name(&udc->dev)) == 0) {
ret = udc_bind_to_driver(udc, driver);
+ if (ret != -EPROBE_DEFER)
+ list_del(&driver->pending);
if (ret)
goto err4;
- list_del(&driver->pending);
break;
}
}
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 795a45b1b25b..58487a473521 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -662,7 +662,7 @@ static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma,
csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
}
- channel->desired_mode = mode;
+ channel->desired_mode = *mode;
musb_writew(epio, MUSB_TXCSR, csr);
return 0;
@@ -2003,10 +2003,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
qh->offset,
urb->transfer_buffer_length);
- done = musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh,
- urb, xfer_len,
- iso_err);
- if (done)
+ if (musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, urb,
+ xfer_len, iso_err))
goto finish;
else
dev_err(musb->controller, "error: rx_dma failed\n");
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 970a30e155cb..72b387d592c2 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -757,14 +757,8 @@ static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
otg->host = host;
dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n");
- /*
- * Kick the state machine work, if peripheral is not supported
- * or peripheral is already registered with us.
- */
- if (motg->pdata->mode == USB_DR_MODE_HOST || otg->gadget) {
- pm_runtime_get_sync(otg->usb_phy->dev);
- schedule_work(&motg->sm_work);
- }
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
return 0;
}
@@ -827,14 +821,8 @@ static int msm_otg_set_peripheral(struct usb_otg *otg,
dev_dbg(otg->usb_phy->dev,
"peripheral driver registered w/ tranceiver\n");
- /*
- * Kick the state machine work, if host is not supported
- * or host is already registered with us.
- */
- if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL || otg->host) {
- pm_runtime_get_sync(otg->usb_phy->dev);
- schedule_work(&motg->sm_work);
- }
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
return 0;
}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 987813b8a7f9..7c319e7edda2 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -163,6 +163,8 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
+ { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
+ { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
{ USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index db86e512e0fc..8849439a8f18 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -315,6 +315,7 @@ static void option_instat_callback(struct urb *urb);
#define TOSHIBA_PRODUCT_G450 0x0d45
#define ALINK_VENDOR_ID 0x1e0e
+#define SIMCOM_PRODUCT_SIM7100E 0x9001 /* Yes, ALINK_VENDOR_ID */
#define ALINK_PRODUCT_PH300 0x9100
#define ALINK_PRODUCT_3GU 0x9200
@@ -607,6 +608,10 @@ static const struct option_blacklist_info zte_1255_blacklist = {
.reserved = BIT(3) | BIT(4),
};
+static const struct option_blacklist_info simcom_sim7100e_blacklist = {
+ .reserved = BIT(5) | BIT(6),
+};
+
static const struct option_blacklist_info telit_le910_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(2),
@@ -1122,6 +1127,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
+ { USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, 0x6001, 0xff, 0xff, 0xff), /* 4G LTE usb-modem U901 */
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
@@ -1645,6 +1652,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
{ USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
+ .driver_info = (kernel_ulong_t)&simcom_sim7100e_blacklist },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 08:06:31 +0000