diff options
Diffstat (limited to 'drivers')
39 files changed, 1146 insertions, 656 deletions
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c index b4f3d64e7da8..5733e8fe1aef 100644 --- a/drivers/memstick/host/jmb38x_ms.c +++ b/drivers/memstick/host/jmb38x_ms.c @@ -370,7 +370,6 @@ static int jmb38x_ms_transfer_data(struct jmb38x_ms_host *host) static int jmb38x_ms_issue_cmd(struct memstick_host *msh) { struct jmb38x_ms_host *host = memstick_priv(msh); - unsigned char *data; unsigned int data_len, cmd, t_val; if (!(STATUS_HAS_MEDIA & readl(host->addr + STATUS))) { @@ -402,8 +401,6 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh) cmd |= TPC_WAIT_INT; } - data = host->req->data; - if (!no_dma) host->cmd_flags |= DMA_DATA; diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c index 1bbb2ead9556..6b13ac56eb27 100644 --- a/drivers/memstick/host/tifm_ms.c +++ b/drivers/memstick/host/tifm_ms.c @@ -256,7 +256,6 @@ static unsigned int tifm_ms_transfer_data(struct tifm_ms *host) static int tifm_ms_issue_cmd(struct tifm_ms *host) { struct tifm_dev *sock = host->dev; - unsigned char *data; unsigned int data_len, cmd, sys_param; host->cmd_flags = 0; @@ -265,8 +264,6 @@ static int tifm_ms_issue_cmd(struct tifm_ms *host) host->io_word = 0; host->cmd_flags = 0; - data = host->req->data; - host->use_dma = !no_dma; if (host->req->long_data) { diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 3a4402a79904..6a51f7a06ce7 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -363,11 +363,11 @@ int mmc_of_parse_voltage(struct device_node *np, u32 *mask) int num_ranges, i; voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); - num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; if (!voltage_ranges) { pr_debug("%pOF: voltage-ranges unspecified\n", np); return 0; } + num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; if (!num_ranges) { pr_err("%pOF: voltage-ranges empty\n", np); return -EINVAL; @@ -429,8 +429,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) if (mmc_gpio_alloc(host)) { put_device(&host->class_dev); - ida_simple_remove(&mmc_host_ida, host->index); - kfree(host); return NULL; } diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index c5208fb312ae..a533cab8fccc 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -184,11 +184,7 @@ int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) if (err) break; - /* if we're just probing, do a single pass */ - if (ocr == 0) - break; - - /* otherwise wait until reset completes */ + /* wait until reset completes */ if (mmc_host_is_spi(host)) { if (!(cmd.resp[0] & R1_SPI_IDLE)) break; @@ -200,6 +196,16 @@ int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) err = -ETIMEDOUT; mmc_delay(10); + + /* + * According to eMMC specification v5.1 section 6.4.3, we + * should issue CMD1 repeatedly in the idle state until + * the eMMC is ready. Otherwise some eMMC devices seem to enter + * the inactive mode after mmc_init_card() issued CMD0 when + * the eMMC device is busy. + */ + if (!ocr && !mmc_host_is_spi(host)) + cmd.arg = cmd.resp[0] | BIT(30); } if (rocr && !mmc_host_is_spi(host)) diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c index efb8a7965dd4..154f4204d58c 100644 --- a/drivers/mmc/core/pwrseq_emmc.c +++ b/drivers/mmc/core/pwrseq_emmc.c @@ -30,19 +30,14 @@ struct mmc_pwrseq_emmc { #define to_pwrseq_emmc(p) container_of(p, struct mmc_pwrseq_emmc, pwrseq) -static void __mmc_pwrseq_emmc_reset(struct mmc_pwrseq_emmc *pwrseq) -{ - gpiod_set_value(pwrseq->reset_gpio, 1); - udelay(1); - gpiod_set_value(pwrseq->reset_gpio, 0); - udelay(200); -} - static void mmc_pwrseq_emmc_reset(struct mmc_host *host) { struct mmc_pwrseq_emmc *pwrseq = to_pwrseq_emmc(host->pwrseq); - __mmc_pwrseq_emmc_reset(pwrseq); + gpiod_set_value_cansleep(pwrseq->reset_gpio, 1); + udelay(1); + gpiod_set_value_cansleep(pwrseq->reset_gpio, 0); + udelay(200); } static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this, @@ -50,8 +45,11 @@ static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this, { struct mmc_pwrseq_emmc *pwrseq = container_of(this, struct mmc_pwrseq_emmc, reset_nb); + gpiod_set_value(pwrseq->reset_gpio, 1); + udelay(1); + gpiod_set_value(pwrseq->reset_gpio, 0); + udelay(200); - __mmc_pwrseq_emmc_reset(pwrseq); return NOTIFY_DONE; } @@ -72,14 +70,18 @@ static int mmc_pwrseq_emmc_probe(struct platform_device *pdev) if (IS_ERR(pwrseq->reset_gpio)) return PTR_ERR(pwrseq->reset_gpio); - /* - * register reset handler to ensure emmc reset also from - * emergency_reboot(), priority 255 is the highest priority - * so it will be executed before any system reboot handler. - */ - pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb; - pwrseq->reset_nb.priority = 255; - register_restart_handler(&pwrseq->reset_nb); + if (!gpiod_cansleep(pwrseq->reset_gpio)) { + /* + * register reset handler to ensure emmc reset also from + * emergency_reboot(), priority 255 is the highest priority + * so it will be executed before any system reboot handler. + */ + pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb; + pwrseq->reset_nb.priority = 255; + register_restart_handler(&pwrseq->reset_nb); + } else { + dev_notice(dev, "EMMC reset pin tied to a sleepy GPIO driver; reset on emergency-reboot disabled\n"); + } pwrseq->pwrseq.ops = &mmc_pwrseq_emmc_ops; pwrseq->pwrseq.dev = dev; diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index 7c364a9c4eeb..b5b9c6142f08 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -472,6 +472,7 @@ void mmc_cleanup_queue(struct mmc_queue *mq) blk_mq_unquiesce_queue(q); blk_cleanup_queue(q); + blk_mq_free_tag_set(&mq->tag_set); /* * A request can be completed before the next request, potentially diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 265e1aeeb9d8..d3d32f9a2cb1 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -221,6 +221,14 @@ static int mmc_decode_scr(struct mmc_card *card) if (scr->sda_spec3) scr->cmds = UNSTUFF_BITS(resp, 32, 2); + + /* SD Spec says: any SD Card shall set at least bits 0 and 2 */ + if (!(scr->bus_widths & SD_SCR_BUS_WIDTH_1) || + !(scr->bus_widths & SD_SCR_BUS_WIDTH_4)) { + pr_err("%s: invalid bus width\n", mmc_hostname(card->host)); + return -EINVAL; + } + return 0; } diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 28fcd8f580a1..0e86340536b6 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -92,6 +92,7 @@ config MMC_SDHCI_PCI tristate "SDHCI support on PCI bus" depends on MMC_SDHCI && PCI select MMC_CQHCI + select IOSF_MBI if X86 help This selects the PCI Secure Digital Host Controller Interface. Most controllers found today are PCI devices. @@ -437,7 +438,7 @@ config MMC_WBSD depends on ISA_DMA_API help This selects the Winbond(R) W83L51xD Secure digital and - Multimedia card Interface. + Multimedia card Interface. If you have a machine with a integrated W83L518D or W83L519D SD/MMC card reader, say Y or M here. @@ -515,7 +516,7 @@ config MMC_TIFM_SD 'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support (TIFM_7XX1)'. - To compile this driver as a module, choose M here: the + To compile this driver as a module, choose M here: the module will be called tifm_sd. config MMC_MVSDIO @@ -531,12 +532,12 @@ config MMC_MVSDIO module will be called mvsdio. config MMC_DAVINCI - tristate "TI DAVINCI Multimedia Card Interface support" - depends on ARCH_DAVINCI - help - This selects the TI DAVINCI Multimedia card Interface. - If you have an DAVINCI board with a Multimedia Card slot, - say Y or M here. If unsure, say N. + tristate "TI DAVINCI Multimedia Card Interface support" + depends on ARCH_DAVINCI + help + This selects the TI DAVINCI Multimedia card Interface. + If you have an DAVINCI board with a Multimedia Card slot, + say Y or M here. If unsure, say N. config MMC_GOLDFISH tristate "goldfish qemu Multimedia Card Interface support" @@ -565,18 +566,18 @@ config MMC_S3C depends on S3C24XX_DMAC help This selects a driver for the MCI interface found in - Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. + Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. If you have a board based on one of those and a MMC/SD slot, say Y or M here. If unsure, say N. config MMC_S3C_HW_SDIO_IRQ - bool "Hardware support for SDIO IRQ" - depends on MMC_S3C - help - Enable the hardware support for SDIO interrupts instead of using - the generic polling code. + bool "Hardware support for SDIO IRQ" + depends on MMC_S3C + help + Enable the hardware support for SDIO interrupts instead of using + the generic polling code. choice prompt "Samsung S3C SD/MMC transfer code" @@ -941,6 +942,7 @@ config MMC_BCM2835 config MMC_MTK tristate "MediaTek SD/MMC Card Interface support" depends on HAS_DMA + select REGULATOR help This selects the MediaTek(R) Secure digital and Multimedia card Interface. If you have a machine with a integrated SD/MMC card reader, say Y or M here. @@ -948,15 +950,16 @@ config MMC_MTK If unsure, say N. config MMC_SDHCI_MICROCHIP_PIC32 - tristate "Microchip PIC32MZDA SDHCI support" - depends on MMC_SDHCI && PIC32MZDA && MMC_SDHCI_PLTFM - help - This selects the Secure Digital Host Controller Interface (SDHCI) - for PIC32MZDA platform. + tristate "Microchip PIC32MZDA SDHCI support" + depends on MMC_SDHCI && PIC32MZDA && MMC_SDHCI_PLTFM + help + This selects the Secure Digital Host Controller Interface (SDHCI) + for PIC32MZDA platform. - If you have a controller with this interface, say Y or M here. + If you have a controller with this interface, say Y or M here. + + If unsure, say N. - If unsure, say N. config MMC_SDHCI_BRCMSTB tristate "Broadcom SDIO/SD/MMC support" depends on ARCH_BRCMSTB || BMIPS_GENERIC @@ -993,6 +996,7 @@ config MMC_SDHCI_OMAP config MMC_SDHCI_AM654 tristate "Support for the SDHCI Controller in TI's AM654 SOCs" depends on MMC_SDHCI_PLTFM && OF + select MMC_SDHCI_IO_ACCESSORS help This selects the Secure Digital Host Controller Interface (SDHCI) support present in TI's AM654 SOCs. The controller supports diff --git a/drivers/mmc/host/alcor.c b/drivers/mmc/host/alcor.c index 6e6b7ade4b60..e481535cba2b 100644 --- a/drivers/mmc/host/alcor.c +++ b/drivers/mmc/host/alcor.c @@ -43,7 +43,6 @@ struct alcor_sdmmc_host { struct device *dev; struct alcor_pci_priv *alcor_pci; - struct mmc_host *mmc; struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; @@ -117,6 +116,9 @@ static void alcor_reset(struct alcor_sdmmc_host *host, u8 val) dev_err(host->dev, "%s: timeout\n", __func__); } +/* + * Perform DMA I/O of a single page. + */ static void alcor_data_set_dma(struct alcor_sdmmc_host *host) { struct alcor_pci_priv *priv = host->alcor_pci; @@ -153,12 +155,26 @@ static void alcor_trigger_data_transfer(struct alcor_sdmmc_host *host) ctrl |= AU6601_DATA_WRITE; if (data->host_cookie == COOKIE_MAPPED) { + /* + * For DMA transfers, this function is called just once, + * at the start of the operation. The hardware can only + * perform DMA I/O on a single page at a time, so here + * we kick off the transfer with the first page, and expect + * subsequent pages to be transferred upon IRQ events + * indicating that the single-page DMA was completed. + */ alcor_data_set_dma(host); ctrl |= AU6601_DATA_DMA_MODE; host->dma_on = 1; alcor_write32(priv, data->sg_count * 0x1000, AU6601_REG_BLOCK_SIZE); } else { + /* + * For PIO transfers, we break down each operation + * into several sector-sized transfers. When one sector has + * complete, the IRQ handler will call this function again + * to kick off the transfer of the next sector. + */ alcor_write32(priv, data->blksz, AU6601_REG_BLOCK_SIZE); } @@ -276,7 +292,7 @@ static void alcor_send_cmd(struct alcor_sdmmc_host *host, break; default: dev_err(host->dev, "%s: cmd->flag (0x%02x) is not valid\n", - mmc_hostname(host->mmc), mmc_resp_type(cmd)); + mmc_hostname(mmc_from_priv(host)), mmc_resp_type(cmd)); break; } @@ -317,7 +333,7 @@ static void alcor_request_complete(struct alcor_sdmmc_host *host, host->data = NULL; host->dma_on = 0; - mmc_request_done(host->mmc, mrq); + mmc_request_done(mmc_from_priv(host), mrq); } static void alcor_finish_data(struct alcor_sdmmc_host *host) @@ -547,7 +563,7 @@ static void alcor_cd_irq(struct alcor_sdmmc_host *host, u32 intmask) alcor_request_complete(host, 1); } - mmc_detect_change(host->mmc, msecs_to_jiffies(1)); + mmc_detect_change(mmc_from_priv(host), msecs_to_jiffies(1)); } static irqreturn_t alcor_irq_thread(int irq, void *d) @@ -771,12 +787,17 @@ static void alcor_pre_req(struct mmc_host *mmc, data->host_cookie = COOKIE_UNMAPPED; /* FIXME: looks like the DMA engine works only with CMD18 */ - if (cmd->opcode != 18) + if (cmd->opcode != MMC_READ_MULTIPLE_BLOCK + && cmd->opcode != MMC_WRITE_MULTIPLE_BLOCK) return; /* * We don't do DMA on "complex" transfers, i.e. with - * non-word-aligned buffers or lengths. Also, we don't bother - * with all the DMA setup overhead for short transfers. + * non-word-aligned buffers or lengths. A future improvement + * could be made to use temporary DMA bounce-buffers when these + * requirements are not met. + * + * Also, we don't bother with all the DMA setup overhead for + * short transfers. */ if (data->blocks * data->blksz < AU6601_MAX_DMA_BLOCK_SIZE) return; @@ -787,6 +808,8 @@ static void alcor_pre_req(struct mmc_host *mmc, for_each_sg(data->sg, sg, data->sg_len, i) { if (sg->length != AU6601_MAX_DMA_BLOCK_SIZE) return; + if (sg->offset != 0) + return; } /* This data might be unmapped at this time */ @@ -1024,7 +1047,7 @@ static void alcor_hw_uninit(struct alcor_sdmmc_host *host) static void alcor_init_mmc(struct alcor_sdmmc_host *host) { - struct mmc_host *mmc = host->mmc; + struct mmc_host *mmc = mmc_from_priv(host); mmc->f_min = AU6601_MIN_CLOCK; mmc->f_max = AU6601_MAX_CLOCK; @@ -1036,26 +1059,21 @@ static void alcor_init_mmc(struct alcor_sdmmc_host *host) mmc->ops = &alcor_sdc_ops; /* The hardware does DMA data transfer of 4096 bytes to/from a single - * buffer address. Scatterlists are not supported, but upon DMA - * completion (signalled via IRQ), the original vendor driver does - * then immediately set up another DMA transfer of the next 4096 - * bytes. - * - * This means that we need to handle the I/O in 4096 byte chunks. - * Lacking a way to limit the sglist entries to 4096 bytes, we instead - * impose that only one segment is provided, with maximum size 4096, - * which also happens to be the minimum size. This means that the - * single-entry sglist handled by this driver can be handed directly - * to the hardware, nice and simple. + * buffer address. Scatterlists are not supported at the hardware + * level, however we can work with them at the driver level, + * provided that each segment is exactly 4096 bytes in size. + * Upon DMA completion of a single segment (signalled via IRQ), we + * immediately proceed to transfer the next segment from the + * scatterlist. * - * Unfortunately though, that means we only do 4096 bytes I/O per - * MMC command. A future improvement would be to make the driver - * accept sg lists and entries of any size, and simply iterate - * through them 4096 bytes at a time. + * The overall request is limited to 240 sectors, matching the + * original vendor driver. */ mmc->max_segs = AU6601_MAX_DMA_SEGMENTS; mmc->max_seg_size = AU6601_MAX_DMA_BLOCK_SIZE; - mmc->max_req_size = mmc->max_seg_size; + mmc->max_blk_count = 240; + mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; + dma_set_max_seg_size(host->dev, mmc->max_seg_size); } static int alcor_pci_sdmmc_drv_probe(struct platform_device *pdev) @@ -1072,7 +1090,6 @@ static int alcor_pci_sdmmc_drv_probe(struct platform_device *pdev) } host = mmc_priv(mmc); - host->mmc = mmc; host->dev = &pdev->dev; host->cur_power_mode = MMC_POWER_UNDEFINED; host->alcor_pci = priv; @@ -1104,13 +1121,14 @@ static int alcor_pci_sdmmc_drv_probe(struct platform_device *pdev) static int alcor_pci_sdmmc_drv_remove(struct platform_device *pdev) { struct alcor_sdmmc_host *host = dev_get_drvdata(&pdev->dev); + struct mmc_host *mmc = mmc_from_priv(host); if (cancel_delayed_work_sync(&host->timeout_work)) alcor_request_complete(host, 0); alcor_hw_uninit(host); - mmc_remove_host(host->mmc); - mmc_free_host(host->mmc); + mmc_remove_host(mmc); + mmc_free_host(mmc); return 0; } diff --git a/drivers/mmc/host/cqhci.c b/drivers/mmc/host/cqhci.c index a8af682a9182..d59cb0a51964 100644 --- a/drivers/mmc/host/cqhci.c +++ b/drivers/mmc/host/cqhci.c @@ -537,6 +537,8 @@ static void cqhci_prep_dcmd_desc(struct mmc_host *mmc, CQHCI_ACT(0x5) | CQHCI_CMD_INDEX(mrq->cmd->opcode) | CQHCI_CMD_TIMING(timing) | CQHCI_RESP_TYPE(resp_type)); + if (cq_host->ops->update_dcmd_desc) + cq_host->ops->update_dcmd_desc(mmc, mrq, &data); *task_desc |= data; desc = (u8 *)task_desc; pr_debug("%s: cqhci: dcmd: cmd: %d timing: %d resp: %d\n", diff --git a/drivers/mmc/host/cqhci.h b/drivers/mmc/host/cqhci.h index 9e68286a07b4..1e8e01d81015 100644 --- a/drivers/mmc/host/cqhci.h +++ b/drivers/mmc/host/cqhci.h @@ -88,6 +88,7 @@ /* send status config 1 */ #define CQHCI_SSC1 0x40 +#define CQHCI_SSC1_CBC_MASK GENMASK(19, 16) /* send status config 2 */ #define CQHCI_SSC2 0x44 @@ -147,6 +148,7 @@ struct cqhci_host_ops; struct mmc_host; +struct mmc_request; struct cqhci_slot; struct cqhci_host { @@ -210,6 +212,8 @@ struct cqhci_host_ops { u32 (*read_l)(struct cqhci_host *host, int reg); void (*enable)(struct mmc_host *mmc); void (*disable)(struct mmc_host *mmc, bool recovery); + void (*update_dcmd_desc)(struct mmc_host *mmc, struct mmc_request *mrq, + u64 *data); }; static inline void cqhci_writel(struct cqhci_host *host, u32 val, int reg) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 2eba507790e4..c5a8af4ca76b 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/device.h> +#include <linux/iopoll.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/ioport.h> @@ -48,6 +49,8 @@ #define CLK_CORE_PHASE_MASK GENMASK(9, 8) #define CLK_TX_PHASE_MASK GENMASK(11, 10) #define CLK_RX_PHASE_MASK GENMASK(13, 12) +#define CLK_PHASE_0 0 +#define CLK_PHASE_180 2 #define CLK_V2_TX_DELAY_MASK GENMASK(19, 16) #define CLK_V2_RX_DELAY_MASK GENMASK(23, 20) #define CLK_V2_ALWAYS_ON BIT(24) @@ -56,10 +59,6 @@ #define CLK_V3_RX_DELAY_MASK GENMASK(27, 22) #define CLK_V3_ALWAYS_ON BIT(28) -#define CLK_DELAY_STEP_PS 200 -#define CLK_PHASE_STEP 30 -#define CLK_PHASE_POINT_NUM (360 / CLK_PHASE_STEP) - #define CLK_TX_DELAY_MASK(h) (h->data->tx_delay_mask) #define CLK_RX_DELAY_MASK(h) (h->data->rx_delay_mask) #define CLK_ALWAYS_ON(h) (h->data->always_on) @@ -164,10 +163,10 @@ struct meson_host { void __iomem *regs; struct clk *core_clk; + struct clk *mux_clk; struct clk *mmc_clk; - struct clk *rx_clk; - struct clk *tx_clk; unsigned long req_rate; + bool ddr; struct pinctrl *pinctrl; struct pinctrl_state *pins_default; @@ -207,90 +206,6 @@ struct meson_host { #define CMD_RESP_MASK GENMASK(31, 1) #define CMD_RESP_SRAM BIT(0) -struct meson_mmc_phase { - struct clk_hw hw; - void __iomem *reg; - unsigned long phase_mask; - unsigned long delay_mask; - unsigned int delay_step_ps; -}; - -#define to_meson_mmc_phase(_hw) container_of(_hw, struct meson_mmc_phase, hw) - -static int meson_mmc_clk_get_phase(struct clk_hw *hw) -{ - struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw); - unsigned int phase_num = 1 << hweight_long(mmc->phase_mask); - unsigned long period_ps, p, d; - int degrees; - u32 val; - - val = readl(mmc->reg); - p = (val & mmc->phase_mask) >> __ffs(mmc->phase_mask); - degrees = p * 360 / phase_num; - - if (mmc->delay_mask) { - period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000, - clk_get_rate(hw->clk)); - d = (val & mmc->delay_mask) >> __ffs(mmc->delay_mask); - degrees += d * mmc->delay_step_ps * 360 / period_ps; - degrees %= 360; - } - - return degrees; -} - -static void meson_mmc_apply_phase_delay(struct meson_mmc_phase *mmc, - unsigned int phase, - unsigned int delay) -{ - u32 val; - - val = readl(mmc->reg); - val &= ~mmc->phase_mask; - val |= phase << __ffs(mmc->phase_mask); - - if (mmc->delay_mask) { - val &= ~mmc->delay_mask; - val |= delay << __ffs(mmc->delay_mask); - } - - writel(val, mmc->reg); -} - -static int meson_mmc_clk_set_phase(struct clk_hw *hw, int degrees) -{ - struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw); - unsigned int phase_num = 1 << hweight_long(mmc->phase_mask); - unsigned long period_ps, d = 0, r; - uint64_t p; - - p = degrees % 360; - - if (!mmc->delay_mask) { - p = DIV_ROUND_CLOSEST_ULL(p, 360 / phase_num); - } else { - period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000, - clk_get_rate(hw->clk)); - - /* First compute the phase index (p), the remainder (r) is the - * part we'll try to acheive using the delays (d). - */ - r = do_div(p, 360 / phase_num); - d = DIV_ROUND_CLOSEST(r * period_ps, - 360 * mmc->delay_step_ps); - d = min(d, mmc->delay_mask >> __ffs(mmc->delay_mask)); - } - - meson_mmc_apply_phase_delay(mmc, p, d); - return 0; -} - -static const struct clk_ops meson_mmc_clk_phase_ops = { - .get_phase = meson_mmc_clk_get_phase, - .set_phase = meson_mmc_clk_set_phase, -}; - static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data) { unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC; @@ -383,16 +298,6 @@ static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, mmc_get_dma_dir(data)); } -static bool meson_mmc_timing_is_ddr(struct mmc_ios *ios) -{ - if (ios->timing == MMC_TIMING_MMC_DDR52 || - ios->timing == MMC_TIMING_UHS_DDR50 || - ios->timing == MMC_TIMING_MMC_HS400) - return true; - - return false; -} - /* * Gating the clock on this controller is tricky. It seems the mmc clock * is also used by the controller. It may crash during some operation if the @@ -429,36 +334,41 @@ static void meson_mmc_clk_ungate(struct meson_host *host) writel(cfg, host->regs + SD_EMMC_CFG); } -static int meson_mmc_clk_set(struct meson_host *host, struct mmc_ios *ios) +static int meson_mmc_clk_set(struct meson_host *host, unsigned long rate, + bool ddr) { struct mmc_host *mmc = host->mmc; - unsigned long rate = ios->clock; int ret; u32 cfg; - /* DDR modes require higher module clock */ - if (meson_mmc_timing_is_ddr(ios)) - rate <<= 1; - /* Same request - bail-out */ - if (host->req_rate == rate) + if (host->ddr == ddr && host->req_rate == rate) return 0; /* stop clock */ meson_mmc_clk_gate(host); host->req_rate = 0; + mmc->actual_clock = 0; - if (!rate) { - mmc->actual_clock = 0; - /* return with clock being stopped */ + /* return with clock being stopped */ + if (!rate) return 0; - } /* Stop the clock during rate change to avoid glitches */ cfg = readl(host->regs + SD_EMMC_CFG); cfg |= CFG_STOP_CLOCK; writel(cfg, host->regs + SD_EMMC_CFG); + if (ddr) { + /* DDR modes require higher module clock */ + rate <<= 1; + cfg |= CFG_DDR; + } else { + cfg &= ~CFG_DDR; + } + writel(cfg, host->regs + SD_EMMC_CFG); + host->ddr = ddr; + ret = clk_set_rate(host->mmc_clk, rate); if (ret) { dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n", @@ -470,12 +380,14 @@ static int meson_mmc_clk_set(struct meson_host *host, struct mmc_ios *ios) mmc->actual_clock = clk_get_rate(host->mmc_clk); /* We should report the real output frequency of the controller */ - if (meson_mmc_timing_is_ddr(ios)) + if (ddr) { + host->req_rate >>= 1; mmc->actual_clock >>= 1; + } dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock); - if (ios->clock != mmc->actual_clock) - dev_dbg(host->dev, "requested rate was %u\n", ios->clock); + if (rate != mmc->actual_clock) + dev_dbg(host->dev, "requested rate was %lu\n", rate); /* (re)start clock */ meson_mmc_clk_ungate(host); @@ -493,8 +405,6 @@ static int meson_mmc_clk_init(struct meson_host *host) struct clk_init_data init; struct clk_mux *mux; struct clk_divider *div; - struct meson_mmc_phase *core, *tx, *rx; - struct clk *clk; char clk_name[32]; int i, ret = 0; const char *mux_parent_names[MUX_CLK_NUM_PARENTS]; @@ -502,9 +412,11 @@ static int meson_mmc_clk_init(struct meson_host *host) u32 clk_reg; /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */ - clk_reg = 0; - clk_reg |= CLK_ALWAYS_ON(host); + clk_reg = CLK_ALWAYS_ON(host); clk_reg |= CLK_DIV_MASK; + clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180); + clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0); + clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0); writel(clk_reg, host->regs + SD_EMMC_CLOCK); /* get the mux parents */ @@ -540,9 +452,9 @@ static int meson_mmc_clk_init(struct meson_host *host) mux->mask = CLK_SRC_MASK >> mux->shift; mux->hw.init = &init; - clk = devm_clk_register(host->dev, &mux->hw); - if (WARN_ON(IS_ERR(clk))) - return PTR_ERR(clk); + host->mux_clk = devm_clk_register(host->dev, &mux->hw); + if (WARN_ON(IS_ERR(host->mux_clk))) + return PTR_ERR(host->mux_clk); /* create the divider */ div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL); @@ -553,7 +465,7 @@ static int meson_mmc_clk_init(struct meson_host *host) init.name = clk_name; init.ops = &clk_divider_ops; init.flags = CLK_SET_RATE_PARENT; - clk_parent[0] = __clk_get_name(clk); + clk_parent[0] = __clk_get_name(host->mux_clk); init.parent_names = clk_parent; init.num_parents = 1; @@ -563,190 +475,104 @@ static int meson_mmc_clk_init(struct meson_host *host) div->hw.init = &init; div->flags = CLK_DIVIDER_ONE_BASED; - clk = devm_clk_register(host->dev, &div->hw); - if (WARN_ON(IS_ERR(clk))) - return PTR_ERR(clk); - - /* create the mmc core clock */ - core = devm_kzalloc(host->dev, sizeof(*core), GFP_KERNEL); - if (!core) - return -ENOMEM; - - snprintf(clk_name, sizeof(clk_name), "%s#core", dev_name(host->dev)); - init.name = clk_name; - init.ops = &meson_mmc_clk_phase_ops; - init.flags = CLK_SET_RATE_PARENT; - clk_parent[0] = __clk_get_name(clk); - init.parent_names = clk_parent; - init.num_parents = 1; - - core->reg = host->regs + SD_EMMC_CLOCK; - core->phase_mask = CLK_CORE_PHASE_MASK; - core->hw.init = &init; - - host->mmc_clk = devm_clk_register(host->dev, &core->hw); - if (WARN_ON(PTR_ERR_OR_ZERO(host->mmc_clk))) + host->mmc_clk = devm_clk_register(host->dev, &div->hw); + if (WARN_ON(IS_ERR(host->mmc_clk))) return PTR_ERR(host->mmc_clk); - /* create the mmc tx clock */ - tx = devm_kzalloc(host->dev, sizeof(*tx), GFP_KERNEL); - if (!tx) - return -ENOMEM; - - snprintf(clk_name, sizeof(clk_name), "%s#tx", dev_name(host->dev)); - init.name = clk_name; - init.ops = &meson_mmc_clk_phase_ops; - init.flags = 0; - clk_parent[0] = __clk_get_name(host->mmc_clk); - init.parent_names = clk_parent; - init.num_parents = 1; - - tx->reg = host->regs + SD_EMMC_CLOCK; - tx->phase_mask = CLK_TX_PHASE_MASK; - tx->delay_mask = CLK_TX_DELAY_MASK(host); - tx->delay_step_ps = CLK_DELAY_STEP_PS; - tx->hw.init = &init; - - host->tx_clk = devm_clk_register(host->dev, &tx->hw); - if (WARN_ON(PTR_ERR_OR_ZERO(host->tx_clk))) - return PTR_ERR(host->tx_clk); - - /* create the mmc rx clock */ - rx = devm_kzalloc(host->dev, sizeof(*rx), GFP_KERNEL); - if (!rx) - return -ENOMEM; - - snprintf(clk_name, sizeof(clk_name), "%s#rx", dev_name(host->dev)); - init.name = clk_name; - init.ops = &meson_mmc_clk_phase_ops; - init.flags = 0; - clk_parent[0] = __clk_get_name(host->mmc_clk); - init.parent_names = clk_parent; - init.num_parents = 1; - - rx->reg = host->regs + SD_EMMC_CLOCK; - rx->phase_mask = CLK_RX_PHASE_MASK; - rx->delay_mask = CLK_RX_DELAY_MASK(host); - rx->delay_step_ps = CLK_DELAY_STEP_PS; - rx->hw.init = &init; - - host->rx_clk = devm_clk_register(host->dev, &rx->hw); - if (WARN_ON(PTR_ERR_OR_ZERO(host->rx_clk))) - return PTR_ERR(host->rx_clk); - /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */ host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000); ret = clk_set_rate(host->mmc_clk, host->mmc->f_min); if (ret) return ret; - clk_set_phase(host->mmc_clk, 180); - clk_set_phase(host->tx_clk, 0); - clk_set_phase(host->rx_clk, 0); - return clk_prepare_enable(host->mmc_clk); } -static void meson_mmc_shift_map(unsigned long *map, unsigned long shift) +static void meson_mmc_disable_resampling(struct meson_host *host) { - DECLARE_BITMAP(left, CLK_PHASE_POINT_NUM); - DECLARE_BITMAP(right, CLK_PHASE_POINT_NUM); + unsigned int val = readl(host->regs + host->data->adjust); - /* - * shift the bitmap right and reintroduce the dropped bits on the left - * of the bitmap - */ - bitmap_shift_right(right, map, shift, CLK_PHASE_POINT_NUM); - bitmap_shift_left(left, map, CLK_PHASE_POINT_NUM - shift, - CLK_PHASE_POINT_NUM); - bitmap_or(map, left, right, CLK_PHASE_POINT_NUM); + val &= ~ADJUST_ADJ_EN; + writel(val, host->regs + host->data->adjust); } -static void meson_mmc_find_next_region(unsigned long *map, - unsigned long *start, - unsigned long *stop) +static void meson_mmc_reset_resampling(struct meson_host *host) { - *start = find_next_bit(map, CLK_PHASE_POINT_NUM, *start); - *stop = find_next_zero_bit(map, CLK_PHASE_POINT_NUM, *start); + unsigned int val; + + meson_mmc_disable_resampling(host); + + val = readl(host->regs + host->data->adjust); + val &= ~ADJUST_ADJ_DELAY_MASK; + writel(val, host->regs + host->data->adjust); } -static int meson_mmc_find_tuning_point(unsigned long *test) +static int meson_mmc_resampling_tuning(struct mmc_host *mmc, u32 opcode) { - unsigned long shift, stop, offset = 0, start = 0, size = 0; + struct meson_host *host = mmc_priv(mmc); + unsigned int val, dly, max_dly, i; + int ret; - /* Get the all good/all bad situation out the way */ - if (bitmap_full(test, CLK_PHASE_POINT_NUM)) - return 0; /* All points are good so point 0 will do */ - else if (bitmap_empty(test, CLK_PHASE_POINT_NUM)) - return -EIO; /* No successful tuning point */ + /* Resampling is done using the source clock */ + max_dly = DIV_ROUND_UP(clk_get_rate(host->mux_clk), + clk_get_rate(host->mmc_clk)); - /* - * Now we know there is a least one region find. Make sure it does - * not wrap by the shifting the bitmap if necessary - */ - shift = find_first_zero_bit(test, CLK_PHASE_POINT_NUM); - if (shift != 0) - meson_mmc_shift_map(test, shift); + val = readl(host->regs + host->data->adjust); + val |= ADJUST_ADJ_EN; + writel(val, host->regs + host->data->adjust); - while (start < CLK_PHASE_POINT_NUM) { - meson_mmc_find_next_region(test, &start, &stop); + if (mmc->doing_retune) + dly = FIELD_GET(ADJUST_ADJ_DELAY_MASK, val) + 1; + else + dly = 0; - if ((stop - start) > size) { - offset = start; - size = stop - start; - } + for (i = 0; i < max_dly; i++) { + val &= ~ADJUST_ADJ_DELAY_MASK; + val |= FIELD_PREP(ADJUST_ADJ_DELAY_MASK, (dly + i) % max_dly); + writel(val, host->regs + host->data->adjust); - start = stop; + ret = mmc_send_tuning(mmc, opcode, NULL); + if (!ret) { + dev_dbg(mmc_dev(mmc), "resampling delay: %u\n", + (dly + i) % max_dly); + return 0; + } } - /* Get the center point of the region */ - offset += (size / 2); - - /* Shift the result back */ - offset = (offset + shift) % CLK_PHASE_POINT_NUM; - - return offset; + meson_mmc_reset_resampling(host); + return -EIO; } -static int meson_mmc_clk_phase_tuning(struct mmc_host *mmc, u32 opcode, - struct clk *clk) +static int meson_mmc_prepare_ios_clock(struct meson_host *host, + struct mmc_ios *ios) { - int point, ret; - DECLARE_BITMAP(test, CLK_PHASE_POINT_NUM); + bool ddr; - dev_dbg(mmc_dev(mmc), "%s phase/delay tunning...\n", - __clk_get_name(clk)); - bitmap_zero(test, CLK_PHASE_POINT_NUM); + switch (ios->timing) { + case MMC_TIMING_MMC_DDR52: + case MMC_TIMING_UHS_DDR50: + ddr = true; + break; - /* Explore tuning points */ - for (point = 0; point < CLK_PHASE_POINT_NUM; point++) { - clk_set_phase(clk, point * CLK_PHASE_STEP); - ret = mmc_send_tuning(mmc, opcode, NULL); - if (!ret) - set_bit(point, test); + default: + ddr = false; + break; } - /* Find the optimal tuning point and apply it */ - point = meson_mmc_find_tuning_point(test); - if (point < 0) - return point; /* tuning failed */ - - clk_set_phase(clk, point * CLK_PHASE_STEP); - dev_dbg(mmc_dev(mmc), "success with phase: %d\n", - clk_get_phase(clk)); - return 0; + return meson_mmc_clk_set(host, ios->clock, ddr); } -static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode) +static void meson_mmc_check_resampling(struct meson_host *host, + struct mmc_ios *ios) { - struct meson_host *host = mmc_priv(mmc); - int adj = 0; - - /* enable signal resampling w/o delay */ - adj = ADJUST_ADJ_EN; - writel(adj, host->regs + host->data->adjust); - - return meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk); + switch (ios->timing) { + case MMC_TIMING_LEGACY: + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_MMC_DDR52: + meson_mmc_disable_resampling(host); + break; + } } static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) @@ -775,12 +601,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); - /* disable signal resampling */ - writel(0, host->regs + host->data->adjust); - - /* Reset rx phase */ - clk_set_phase(host->rx_clk, 0); - break; case MMC_POWER_ON: @@ -817,20 +637,13 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) val = readl(host->regs + SD_EMMC_CFG); val &= ~CFG_BUS_WIDTH_MASK; val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width); + writel(val, host->regs + SD_EMMC_CFG); - val &= ~CFG_DDR; - if (meson_mmc_timing_is_ddr(ios)) - val |= CFG_DDR; - - val &= ~CFG_CHK_DS; - if (ios->timing == MMC_TIMING_MMC_HS400) - val |= CFG_CHK_DS; - - err = meson_mmc_clk_set(host, ios); + meson_mmc_check_resampling(host, ios); + err = meson_mmc_prepare_ios_clock(host, ios); if (err) dev_err(host->dev, "Failed to set clock: %d\n,", err); - writel(val, host->regs + SD_EMMC_CFG); dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val); } @@ -1081,9 +894,6 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) } out: - /* ack all enabled interrupts */ - writel(irq_en, host->regs + SD_EMMC_STATUS); - if (cmd->error) { /* Stop desc in case of errors */ u32 start = readl(host->regs + SD_EMMC_START); @@ -1095,12 +905,14 @@ out: if (ret == IRQ_HANDLED) meson_mmc_request_done(host->mmc, cmd->mrq); + /* ack all raised interrupts */ + writel(status, host->regs + SD_EMMC_STATUS); + return ret; } static int meson_mmc_wait_desc_stop(struct meson_host *host) { - int loop; u32 status; /* @@ -1110,20 +922,10 @@ static int meson_mmc_wait_desc_stop(struct meson_host *host) * If we don't confirm the descriptor is stopped, it might raise new * IRQs after we have called mmc_request_done() which is bad. */ - for (loop = 50; loop; loop--) { - status = readl(host->regs + SD_EMMC_STATUS); - if (status & (STATUS_BUSY | STATUS_DESC_BUSY)) - udelay(100); - else - break; - } - - if (status & (STATUS_BUSY | STATUS_DESC_BUSY)) { - dev_err(host->dev, "Timed out waiting for host to stop\n"); - return -ETIMEDOUT; - } - return 0; + return readl_poll_timeout(host->regs + SD_EMMC_STATUS, status, + !(status & (STATUS_BUSY | STATUS_DESC_BUSY)), + 100, 5000); } static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) @@ -1227,7 +1029,7 @@ static const struct mmc_host_ops meson_mmc_ops = { .get_cd = meson_mmc_get_cd, .pre_req = meson_mmc_pre_req, .post_req = meson_mmc_post_req, - .execute_tuning = meson_mmc_execute_tuning, + .execute_tuning = meson_mmc_resampling_tuning, .card_busy = meson_mmc_card_busy, .start_signal_voltage_switch = meson_mmc_voltage_switch, }; @@ -1338,7 +1140,7 @@ static int meson_mmc_probe(struct platform_device *pdev) host->regs + SD_EMMC_IRQ_EN); ret = request_threaded_irq(host->irq, meson_mmc_irq, - meson_mmc_irq_thread, IRQF_SHARED, + meson_mmc_irq_thread, IRQF_ONESHOT, dev_name(&pdev->dev), host); if (ret) goto err_init_clk; @@ -1349,6 +1151,13 @@ static int meson_mmc_probe(struct platform_device *pdev) mmc->max_segs = SD_EMMC_DESC_BUF_LEN / sizeof(struct sd_emmc_desc); mmc->max_seg_size = mmc->max_req_size; + /* + * At the moment, we don't know how to reliably enable HS400. + * From the different datasheets, it is not even clear if this mode + * is officially supported by any of the SoCs + */ + mmc->caps2 &= ~MMC_CAP2_HS400; + /* data bounce buffer */ host->bounce_buf_size = mmc->max_req_size; host->bounce_buf = diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 1b1498805972..19544b121276 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1,5 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* - * mmc_spi.c - Access SD/MMC cards through SPI master controllers + * Access SD/MMC cards through SPI master controllers * * (C) Copyright 2005, Intec Automation, * Mike Lavender (mike@steroidmicros) @@ -8,21 +9,6 @@ * Hans-Peter Nilsson (hp@axis.com) * (C) Copyright 2007, ATRON electronic GmbH, * Jan Nikitenko <jan.nikitenko@gmail.com> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/sched.h> #include <linux/delay.h> @@ -197,7 +183,7 @@ mmc_spi_readbytes(struct mmc_spi_host *host, unsigned len) static int mmc_spi_skip(struct mmc_spi_host *host, unsigned long timeout, unsigned n, u8 byte) { - u8 *cp = host->data->status; + u8 *cp = host->data->status; unsigned long start = jiffies; while (1) { @@ -220,7 +206,7 @@ static int mmc_spi_skip(struct mmc_spi_host *host, unsigned long timeout, * We use jiffies here because we want to have a relation * between elapsed time and the blocking of the scheduler. */ - if (time_is_before_jiffies(start+1)) + if (time_is_before_jiffies(start + 1)) schedule(); } return -ETIMEDOUT; @@ -415,7 +401,7 @@ checkstatus: default: dev_dbg(&host->spi->dev, "bad response type %04x\n", - mmc_spi_resp_type(cmd)); + mmc_spi_resp_type(cmd)); if (value >= 0) value = -EINVAL; goto done; @@ -467,8 +453,8 @@ mmc_spi_command_send(struct mmc_spi_host *host, memset(cp, 0xff, sizeof(data->status)); cp[1] = 0x40 | cmd->opcode; - put_unaligned_be32(cmd->arg, cp+2); - cp[6] = crc7_be(0, cp+1, 5) | 0x01; + put_unaligned_be32(cmd->arg, cp + 2); + cp[6] = crc7_be(0, cp + 1, 5) | 0x01; cp += 7; /* Then, read up to 13 bytes (while writing all-ones): @@ -642,9 +628,7 @@ mmc_spi_setup_data_message( if (multiple || direction == DMA_TO_DEVICE) { t = &host->early_status; memset(t, 0, sizeof(*t)); - t->len = (direction == DMA_TO_DEVICE) - ? sizeof(scratch->status) - : 1; + t->len = (direction == DMA_TO_DEVICE) ? sizeof(scratch->status) : 1; t->tx_buf = host->ones; t->tx_dma = host->ones_dma; t->rx_buf = scratch->status; @@ -677,8 +661,7 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t, u32 pattern; if (host->mmc->use_spi_crc) - scratch->crc_val = cpu_to_be16( - crc_itu_t(0, t->tx_buf, t->len)); + scratch->crc_val = cpu_to_be16(crc_itu_t(0, t->tx_buf, t->len)); if (host->dma_dev) dma_sync_single_for_device(host->dma_dev, host->data_dma, sizeof(*scratch), @@ -819,6 +802,10 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t, } status = spi_sync_locked(spi, &host->m); + if (status < 0) { + dev_dbg(&spi->dev, "read error %d\n", status); + return status; + } if (host->dma_dev) { dma_sync_single_for_cpu(host->dma_dev, @@ -855,9 +842,9 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t, be16_to_cpus(&scratch->crc_val); if (scratch->crc_val != crc) { - dev_dbg(&spi->dev, "read - crc error: crc_val=0x%04x, " - "computed=0x%04x len=%d\n", - scratch->crc_val, crc, t->len); + dev_dbg(&spi->dev, + "read - crc error: crc_val=0x%04x, computed=0x%04x len=%d\n", + scratch->crc_val, crc, t->len); return -EILSEQ; } } @@ -945,9 +932,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, dev_dbg(&host->spi->dev, " mmc_spi: %s block, %d bytes\n", - (direction == DMA_TO_DEVICE) - ? "write" - : "read", + (direction == DMA_TO_DEVICE) ? "write" : "read", t->len); if (direction == DMA_TO_DEVICE) @@ -974,8 +959,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, if (status < 0) { data->error = status; dev_dbg(&spi->dev, "%s status %d\n", - (direction == DMA_TO_DEVICE) - ? "write" : "read", + (direction == DMA_TO_DEVICE) ? "write" : "read", status); break; } @@ -1249,8 +1233,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) mres = spi_setup(host->spi); if (mres < 0) dev_dbg(&host->spi->dev, - "switch back to SPI mode 3" - " failed\n"); + "switch back to SPI mode 3 failed\n"); } } @@ -1470,7 +1453,7 @@ static int mmc_spi_probe(struct spi_device *spi) return 0; fail_add_host: - mmc_remove_host (mmc); + mmc_remove_host(mmc); fail_glue_init: if (host->dma_dev) dma_unmap_single(host->dma_dev, host->data_dma, @@ -1485,7 +1468,6 @@ fail_ones_dma: fail_nobuf1: mmc_free_host(mmc); mmc_spi_put_pdata(spi); - dev_set_drvdata(&spi->dev, NULL); nomem: kfree(ones); @@ -1496,32 +1478,27 @@ nomem: static int mmc_spi_remove(struct spi_device *spi) { struct mmc_host *mmc = dev_get_drvdata(&spi->dev); - struct mmc_spi_host *host; - - if (mmc) { - host = mmc_priv(mmc); + struct mmc_spi_host *host = mmc_priv(mmc); - /* prevent new mmc_detect_change() calls */ - if (host->pdata && host->pdata->exit) - host->pdata->exit(&spi->dev, mmc); + /* prevent new mmc_detect_change() calls */ + if (host->pdata && host->pdata->exit) + host->pdata->exit(&spi->dev, mmc); - mmc_remove_host(mmc); + mmc_remove_host(mmc); - if (host->dma_dev) { - dma_unmap_single(host->dma_dev, host->ones_dma, - MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE); - dma_unmap_single(host->dma_dev, host->data_dma, - sizeof(*host->data), DMA_BIDIRECTIONAL); - } + if (host->dma_dev) { + dma_unmap_single(host->dma_dev, host->ones_dma, + MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE); + dma_unmap_single(host->dma_dev, host->data_dma, + sizeof(*host->data), DMA_BIDIRECTIONAL); + } - kfree(host->data); - kfree(host->ones); + kfree(host->data); + kfree(host->ones); - spi->max_speed_hz = mmc->f_max; - mmc_free_host(mmc); - mmc_spi_put_pdata(spi); - dev_set_drvdata(&spi->dev, NULL); - } + spi->max_speed_hz = mmc->f_max; + mmc_free_host(mmc); + mmc_spi_put_pdata(spi); return 0; } @@ -1542,8 +1519,7 @@ static struct spi_driver mmc_spi_driver = { module_spi_driver(mmc_spi_driver); -MODULE_AUTHOR("Mike Lavender, David Brownell, " - "Hans-Peter Nilsson, Jan Nikitenko"); +MODULE_AUTHOR("Mike Lavender, David Brownell, Hans-Peter Nilsson, Jan Nikitenko"); MODULE_DESCRIPTION("SPI SD/MMC host driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("spi:mmc_spi"); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 387ff14587b8..356833a606d5 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -43,21 +43,11 @@ #include <asm/io.h> #include "mmci.h" -#include "mmci_qcom_dml.h" #define DRIVER_NAME "mmci-pl18x" -#ifdef CONFIG_DMA_ENGINE -void mmci_variant_init(struct mmci_host *host); -#else -static inline void mmci_variant_init(struct mmci_host *host) {} -#endif - -#ifdef CONFIG_MMC_STM32_SDMMC -void sdmmc_variant_init(struct mmci_host *host); -#else -static inline void sdmmc_variant_init(struct mmci_host *host) {} -#endif +static void mmci_variant_init(struct mmci_host *host); +static void ux500v2_variant_init(struct mmci_host *host); static unsigned int fmax = 515633; @@ -70,7 +60,6 @@ static struct variant_data variant_arm = { .cmdreg_srsp = MCI_CPSM_RESPONSE, .datalength_bits = 16, .datactrl_blocksz = 11, - .datactrl_dpsm_enable = MCI_DPSM_ENABLE, .pwrreg_powerup = MCI_PWR_UP, .f_max = 100000000, .reversed_irq_handling = true, @@ -90,7 +79,6 @@ static struct variant_data variant_arm_extended_fifo = { .cmdreg_srsp = MCI_CPSM_RESPONSE, .datalength_bits = 16, .datactrl_blocksz = 11, - .datactrl_dpsm_enable = MCI_DPSM_ENABLE, .pwrreg_powerup = MCI_PWR_UP, .f_max = 100000000, .mmcimask1 = true, @@ -110,7 +98,6 @@ static struct variant_data variant_arm_extended_fifo_hwfc = { .cmdreg_srsp = MCI_CPSM_RESPONSE, .datalength_bits = 16, .datactrl_blocksz = 11, - .datactrl_dpsm_enable = MCI_DPSM_ENABLE, .pwrreg_powerup = MCI_PWR_UP, .f_max = 100000000, .mmcimask1 = true, @@ -131,7 +118,6 @@ static struct variant_data variant_u300 = { .cmdreg_srsp = MCI_CPSM_RESPONSE, .datalength_bits = 16, .datactrl_blocksz = 11, - .datactrl_dpsm_enable = MCI_DPSM_ENABLE, .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .st_sdio = true, .pwrreg_powerup = MCI_PWR_ON, @@ -157,7 +143,6 @@ static struct variant_data variant_nomadik = { .cmdreg_srsp = MCI_CPSM_RESPONSE, .datalength_bits = 24, .datactrl_blocksz = 11, - .datactrl_dpsm_enable = MCI_DPSM_ENABLE, .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .st_sdio = true, .st_clkdiv = true, @@ -186,7 +171,6 @@ static struct variant_data variant_ux500 = { .cmdreg_srsp = MCI_CPSM_RESPONSE, .datalength_bits = 24, .datactrl_blocksz = 11, - .datactrl_dpsm_enable = MCI_DPSM_ENABLE, .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .st_sdio = true, .st_clkdiv = true, @@ -220,11 +204,9 @@ static struct variant_data variant_ux500v2 = { .datactrl_mask_ddrmode = MCI_DPSM_ST_DDRMODE, .datalength_bits = 24, .datactrl_blocksz = 11, - .datactrl_dpsm_enable = MCI_DPSM_ENABLE, .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .st_sdio = true, .st_clkdiv = true, - .blksz_datactrl16 = true, .pwrreg_powerup = MCI_PWR_ON, .f_max = 100000000, .signal_direction = true, @@ -238,7 +220,7 @@ static struct variant_data variant_ux500v2 = { .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_OD, - .init = mmci_variant_init, + .init = ux500v2_variant_init, }; static struct variant_data variant_stm32 = { @@ -255,7 +237,6 @@ static struct variant_data variant_stm32 = { .irq_pio_mask = MCI_IRQ_PIO_MASK, .datalength_bits = 24, .datactrl_blocksz = 11, - .datactrl_dpsm_enable = MCI_DPSM_ENABLE, .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .st_sdio = true, .st_clkdiv = true, @@ -299,10 +280,8 @@ static struct variant_data variant_qcom = { .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, .cmdreg_srsp = MCI_CPSM_RESPONSE, .data_cmd_enable = MCI_CPSM_QCOM_DATCMD, - .blksz_datactrl4 = true, .datalength_bits = 24, .datactrl_blocksz = 11, - .datactrl_dpsm_enable = MCI_DPSM_ENABLE, .pwrreg_powerup = MCI_PWR_UP, .f_max = 208000000, .explicit_mclk_control = true, @@ -624,6 +603,16 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); } +static u32 mmci_get_dctrl_cfg(struct mmci_host *host) +{ + return MCI_DPSM_ENABLE | mmci_dctrl_blksz(host); +} + +static u32 ux500v2_get_dctrl_cfg(struct mmci_host *host) +{ + return MCI_DPSM_ENABLE | (host->data->blksz << 16); +} + /* * All the DMA operation mode stuff goes inside this ifdef. * This assumes that you have a generic DMA device interface, @@ -886,15 +875,11 @@ int mmci_dmae_prep_data(struct mmci_host *host, int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl) { struct mmci_dmae_priv *dmae = host->dma_priv; - struct mmc_data *data = host->data; host->dma_in_progress = true; dmaengine_submit(dmae->desc_current); dma_async_issue_pending(dmae->cur); - if (host->variant->qcom_dml) - dml_start_xfer(host, data); - *datactrl |= MCI_DPSM_DMAENABLE; return 0; @@ -952,6 +937,7 @@ void mmci_dmae_unprep_data(struct mmci_host *host, static struct mmci_host_ops mmci_variant_ops = { .prep_data = mmci_dmae_prep_data, .unprep_data = mmci_dmae_unprep_data, + .get_datactrl_cfg = mmci_get_dctrl_cfg, .get_next_data = mmci_dmae_get_next_data, .dma_setup = mmci_dmae_setup, .dma_release = mmci_dmae_release, @@ -959,12 +945,22 @@ static struct mmci_host_ops mmci_variant_ops = { .dma_finalize = mmci_dmae_finalize, .dma_error = mmci_dmae_error, }; +#else +static struct mmci_host_ops mmci_variant_ops = { + .get_datactrl_cfg = mmci_get_dctrl_cfg, +}; +#endif void mmci_variant_init(struct mmci_host *host) { host->ops = &mmci_variant_ops; } -#endif + +void ux500v2_variant_init(struct mmci_host *host) +{ + host->ops = &mmci_variant_ops; + host->ops->get_datactrl_cfg = ux500v2_get_dctrl_cfg; +} static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq) { @@ -1000,7 +996,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) unsigned int datactrl, timeout, irqmask; unsigned long long clks; void __iomem *base; - int blksz_bits; dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n", data->blksz, data->blocks, data->flags); @@ -1018,18 +1013,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) writel(timeout, base + MMCIDATATIMER); writel(host->size, base + MMCIDATALENGTH); - blksz_bits = ffs(data->blksz) - 1; - BUG_ON(1 << blksz_bits != data->blksz); - - if (variant->blksz_datactrl16) - datactrl = variant->datactrl_dpsm_enable | (data->blksz << 16); - else if (variant->blksz_datactrl4) - datactrl = variant->datactrl_dpsm_enable | (data->blksz << 4); - else - datactrl = variant->datactrl_dpsm_enable | blksz_bits << 4; - - if (data->flags & MMC_DATA_READ) - datactrl |= MCI_DPSM_DIRECTION; + datactrl = host->ops->get_datactrl_cfg(host); + datactrl |= host->data->flags & MMC_DATA_READ ? MCI_DPSM_DIRECTION : 0; if (host->mmc->card && mmc_card_sdio(host->mmc->card)) { u32 clk; @@ -1220,12 +1205,13 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, unsigned int status) { void __iomem *base = host->base; - bool sbc; + bool sbc, busy_resp; if (!cmd) return; sbc = (cmd == host->mrq->sbc); + busy_resp = !!(cmd->flags & MMC_RSP_BUSY); /* * We need to be one of these interrupts to be considered worth @@ -1239,8 +1225,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, /* * ST Micro variant: handle busy detection. */ - if (host->variant->busy_detect) { - bool busy_resp = !!(cmd->flags & MMC_RSP_BUSY); + if (busy_resp && host->variant->busy_detect) { /* We are busy with a command, return */ if (host->busy_status && @@ -1253,7 +1238,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, * that the special busy status bit is still set before * proceeding. */ - if (!host->busy_status && busy_resp && + if (!host->busy_status && !(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) && (readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) { @@ -1550,9 +1535,10 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) } /* - * Don't poll for busy completion in irq context. + * Busy detection has been handled by mmci_cmd_irq() above. + * Clear the status bit to prevent polling in IRQ context. */ - if (host->variant->busy_detect && host->busy_status) + if (host->variant->busy_detect_flag) status &= ~host->variant->busy_detect_flag; ret = 1; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 14df81054438..4f071bd34e59 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -131,6 +131,11 @@ /* Control register extensions in the Qualcomm versions */ #define MCI_DPSM_QCOM_DATA_PEND BIT(17) #define MCI_DPSM_QCOM_RX_DATA_PEND BIT(20) +/* Control register extensions in STM32 versions */ +#define MCI_DPSM_STM32_MODE_BLOCK (0 << 2) +#define MCI_DPSM_STM32_MODE_SDIO (1 << 2) +#define MCI_DPSM_STM32_MODE_STREAM (2 << 2) +#define MCI_DPSM_STM32_MODE_BLOCK_STOP (3 << 2) #define MMCIDATACNT 0x030 #define MMCISTATUS 0x034 @@ -275,12 +280,8 @@ struct mmci_host; * @st_clkdiv: true if using a ST-specific clock divider algorithm * @stm32_clkdiv: true if using a STM32-specific clock divider algorithm * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. - * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register - * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl - * register * @datactrl_mask_sdio: SDIO enable mask in datactrl register * @datactrl_blksz: block size in power of two - * @datactrl_dpsm_enable: enable value for DPSM * @datactrl_first: true if data must be setup before send command * @datacnt_useless: true if you could not use datacnt register to read * remaining data @@ -325,14 +326,11 @@ struct variant_data { unsigned int datactrl_mask_ddrmode; unsigned int datactrl_mask_sdio; unsigned int datactrl_blocksz; - unsigned int datactrl_dpsm_enable; u8 datactrl_first:1; u8 datacnt_useless:1; u8 st_sdio:1; u8 st_clkdiv:1; u8 stm32_clkdiv:1; - u8 blksz_datactrl16:1; - u8 blksz_datactrl4:1; u32 pwrreg_powerup; u32 f_max; u8 signal_direction:1; @@ -362,6 +360,7 @@ struct mmci_host_ops { bool next); void (*unprep_data)(struct mmci_host *host, struct mmc_data *data, int err); + u32 (*get_datactrl_cfg)(struct mmci_host *host); void (*get_next_data)(struct mmci_host *host, struct mmc_data *data); int (*dma_setup)(struct mmci_host *host); void (*dma_release)(struct mmci_host *host); @@ -429,6 +428,12 @@ struct mmci_host { void mmci_write_clkreg(struct mmci_host *host, u32 clk); void mmci_write_pwrreg(struct mmci_host *host, u32 pwr); +static inline u32 mmci_dctrl_blksz(struct mmci_host *host) +{ + return (ffs(host->data->blksz) - 1) << 4; +} + +#ifdef CONFIG_DMA_ENGINE int mmci_dmae_prep_data(struct mmci_host *host, struct mmc_data *data, bool next); void mmci_dmae_unprep_data(struct mmci_host *host, struct mmc_data *data, @@ -439,3 +444,16 @@ void mmci_dmae_release(struct mmci_host *host); int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl); void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data); void mmci_dmae_error(struct mmci_host *host); +#endif + +#ifdef CONFIG_MMC_QCOM_DML +void qcom_variant_init(struct mmci_host *host); +#else +static inline void qcom_variant_init(struct mmci_host *host) {} +#endif + +#ifdef CONFIG_MMC_STM32_SDMMC +void sdmmc_variant_init(struct mmci_host *host); +#else +static inline void sdmmc_variant_init(struct mmci_host *host) {} +#endif diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c index 25d0a75533ea..3af396b3e0a0 100644 --- a/drivers/mmc/host/mmci_qcom_dml.c +++ b/drivers/mmc/host/mmci_qcom_dml.c @@ -54,10 +54,15 @@ #define DML_OFFSET 0x800 -void dml_start_xfer(struct mmci_host *host, struct mmc_data *data) +static int qcom_dma_start(struct mmci_host *host, unsigned int *datactrl) { u32 config; void __iomem *base = host->base + DML_OFFSET; + struct mmc_data *data = host->data; + int ret = mmci_dmae_start(host, datactrl); + + if (ret) + return ret; if (data->flags & MMC_DATA_READ) { /* Read operation: configure DML for producer operation */ @@ -96,6 +101,7 @@ void dml_start_xfer(struct mmci_host *host, struct mmc_data *data) /* make sure the dml is configured before dma is triggered */ wmb(); + return 0; } static int of_get_dml_pipe_index(struct device_node *np, const char *name) @@ -133,7 +139,6 @@ static int qcom_dma_setup(struct mmci_host *host) producer_id = of_get_dml_pipe_index(np, "rx"); if (producer_id < 0 || consumer_id < 0) { - host->variant->qcom_dml = false; mmci_dmae_release(host); return -EINVAL; } @@ -183,13 +188,19 @@ static int qcom_dma_setup(struct mmci_host *host) return 0; } +static u32 qcom_get_dctrl_cfg(struct mmci_host *host) +{ + return MCI_DPSM_ENABLE | (host->data->blksz << 4); +} + static struct mmci_host_ops qcom_variant_ops = { .prep_data = mmci_dmae_prep_data, .unprep_data = mmci_dmae_unprep_data, + .get_datactrl_cfg = qcom_get_dctrl_cfg, .get_next_data = mmci_dmae_get_next_data, .dma_setup = qcom_dma_setup, .dma_release = mmci_dmae_release, - .dma_start = mmci_dmae_start, + .dma_start = qcom_dma_start, .dma_finalize = mmci_dmae_finalize, .dma_error = mmci_dmae_error, }; diff --git a/drivers/mmc/host/mmci_qcom_dml.h b/drivers/mmc/host/mmci_qcom_dml.h deleted file mode 100644 index fa16f6f4d4ad..000000000000 --- a/drivers/mmc/host/mmci_qcom_dml.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * - * Copyright (c) 2011, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef __MMC_QCOM_DML_H__ -#define __MMC_QCOM_DML_H__ - -#ifdef CONFIG_MMC_QCOM_DML -void qcom_variant_init(struct mmci_host *host); -void dml_start_xfer(struct mmci_host *host, struct mmc_data *data); -#else -static inline void qcom_variant_init(struct mmci_host *host) -{ -} -static inline void dml_start_xfer(struct mmci_host *host, struct mmc_data *data) -{ -} -#endif /* CONFIG_MMC_QCOM_DML */ - -#endif /* __MMC_QCOM_DML_H__ */ diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c index cfbfc6f1048f..8e83ae6920ae 100644 --- a/drivers/mmc/host/mmci_stm32_sdmmc.c +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c @@ -265,10 +265,28 @@ static void mmci_sdmmc_set_pwrreg(struct mmci_host *host, unsigned int pwr) } } +static u32 sdmmc_get_dctrl_cfg(struct mmci_host *host) +{ + u32 datactrl; + + datactrl = mmci_dctrl_blksz(host); + + if (host->mmc->card && mmc_card_sdio(host->mmc->card) && + host->data->blocks == 1) + datactrl |= MCI_DPSM_STM32_MODE_SDIO; + else if (host->data->stop && !host->mrq->sbc) + datactrl |= MCI_DPSM_STM32_MODE_BLOCK_STOP; + else + datactrl |= MCI_DPSM_STM32_MODE_BLOCK; + + return datactrl; +} + static struct mmci_host_ops sdmmc_variant_ops = { .validate_data = sdmmc_idma_validate_data, .prep_data = sdmmc_idma_prep_data, .unprep_data = sdmmc_idma_unprep_data, + .get_datactrl_cfg = sdmmc_get_dctrl_cfg, .dma_setup = sdmmc_idma_setup, .dma_start = sdmmc_idma_start, .dma_finalize = sdmmc_idma_finalize, diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 833ef0590af8..c518cc208a1f 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -300,6 +300,8 @@ #define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */ #define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */ +#define DEFAULT_DEBOUNCE (8) /* 8 cycles CD debounce */ + #define PAD_DELAY_MAX 32 /* PAD delay cells */ /*--------------------------------------------------------------------------*/ /* Descriptor Structure */ @@ -372,6 +374,7 @@ struct mtk_mmc_compatible { bool stop_clk_fix; bool enhance_rx; bool support_64g; + bool use_internal_cd; }; struct msdc_tune_para { @@ -430,6 +433,7 @@ struct msdc_host { bool hs400_cmd_resp_sel_rising; /* cmd response sample selection for HS400 */ bool hs400_mode; /* current eMMC will run at hs400 mode */ + bool internal_cd; /* Use internal card-detect logic */ struct msdc_save_para save_para; /* used when gate HCLK */ struct msdc_tune_para def_tune_para; /* default tune setting */ struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */ @@ -507,6 +511,28 @@ static const struct mtk_mmc_compatible mt7622_compat = { .support_64g = false, }; +static const struct mtk_mmc_compatible mt8516_compat = { + .clk_div_bits = 12, + .hs400_tune = false, + .pad_tune_reg = MSDC_PAD_TUNE0, + .async_fifo = true, + .data_tune = true, + .busy_check = true, + .stop_clk_fix = true, +}; + +static const struct mtk_mmc_compatible mt7620_compat = { + .clk_div_bits = 8, + .hs400_tune = false, + .pad_tune_reg = MSDC_PAD_TUNE, + .async_fifo = false, + .data_tune = false, + .busy_check = false, + .stop_clk_fix = false, + .enhance_rx = false, + .use_internal_cd = true, +}; + static const struct of_device_id msdc_of_ids[] = { { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat}, { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat}, @@ -514,6 +540,8 @@ static const struct of_device_id msdc_of_ids[] = { { .compatible = "mediatek,mt2701-mmc", .data = &mt2701_compat}, { .compatible = "mediatek,mt2712-mmc", .data = &mt2712_compat}, { .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat}, + { .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat}, + { .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat}, {} }; MODULE_DEVICE_TABLE(of, msdc_of_ids); @@ -1407,6 +1435,12 @@ static irqreturn_t msdc_irq(int irq, void *dev_id) sdio_signal_irq(host->mmc); } + if ((events & event_mask) & MSDC_INT_CDSC) { + if (host->internal_cd) + mmc_detect_change(host->mmc, msecs_to_jiffies(20)); + events &= ~MSDC_INT_CDSC; + } + if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ))) break; @@ -1440,14 +1474,24 @@ static void msdc_init_hw(struct msdc_host *host) /* Reset */ msdc_reset_hw(host); - /* Disable card detection */ - sdr_clr_bits(host->base + MSDC_PS, MSDC_PS_CDEN); - /* Disable and clear all interrupts */ writel(0, host->base + MSDC_INTEN); val = readl(host->base + MSDC_INT); writel(val, host->base + MSDC_INT); + /* Configure card detection */ + if (host->internal_cd) { + sdr_set_field(host->base + MSDC_PS, MSDC_PS_CDDEBOUNCE, + DEFAULT_DEBOUNCE); + sdr_set_bits(host->base + MSDC_PS, MSDC_PS_CDEN); + sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_CDSC); + sdr_set_bits(host->base + SDC_CFG, SDC_CFG_INSWKUP); + } else { + sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_INSWKUP); + sdr_clr_bits(host->base + MSDC_PS, MSDC_PS_CDEN); + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_CDSC); + } + if (host->top_base) { writel(0, host->top_base + EMMC_TOP_CONTROL); writel(0, host->top_base + EMMC_TOP_CMD); @@ -1557,6 +1601,13 @@ static void msdc_init_hw(struct msdc_host *host) static void msdc_deinit_hw(struct msdc_host *host) { u32 val; + + if (host->internal_cd) { + /* Disabled card-detect */ + sdr_clr_bits(host->base + MSDC_PS, MSDC_PS_CDEN); + sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_INSWKUP); + } + /* Disable and clear all interrupts */ writel(0, host->base + MSDC_INTEN); @@ -2055,13 +2106,31 @@ static void msdc_ack_sdio_irq(struct mmc_host *mmc) __msdc_enable_sdio_irq(mmc, 1); } +static int msdc_get_cd(struct mmc_host *mmc) +{ + struct msdc_host *host = mmc_priv(mmc); + int val; + + if (mmc->caps & MMC_CAP_NONREMOVABLE) + return 1; + + if (!host->internal_cd) + return mmc_gpio_get_cd(mmc); + + val = readl(host->base + MSDC_PS) & MSDC_PS_CDSTS; + if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) + return !!val; + else + return !val; +} + static const struct mmc_host_ops mt_msdc_ops = { .post_req = msdc_post_req, .pre_req = msdc_pre_req, .request = msdc_ops_request, .set_ios = msdc_ops_set_ios, .get_ro = mmc_gpio_get_ro, - .get_cd = mmc_gpio_get_cd, + .get_cd = msdc_get_cd, .enable_sdio_irq = msdc_enable_sdio_irq, .ack_sdio_irq = msdc_ack_sdio_irq, .start_signal_voltage_switch = msdc_ops_switch_volt, @@ -2123,9 +2192,11 @@ static int msdc_drv_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - host->top_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(host->top_base)) - host->top_base = NULL; + if (res) { + host->top_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(host->top_base)) + host->top_base = NULL; + } ret = mmc_regulator_get_supply(mmc); if (ret) @@ -2191,6 +2262,16 @@ static int msdc_drv_probe(struct platform_device *pdev) else mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095); + if (!(mmc->caps & MMC_CAP_NONREMOVABLE) && + !mmc_can_gpio_cd(mmc) && + host->dev_comp->use_internal_cd) { + /* + * Is removable but no GPIO declared, so + * use internal functionality. + */ + host->internal_cd = true; + } + if (mmc->caps & MMC_CAP_SDIO_IRQ) mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; @@ -2227,7 +2308,7 @@ static int msdc_drv_probe(struct platform_device *pdev) msdc_init_hw(host); ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, pdev->name, host); + IRQF_TRIGGER_NONE, pdev->name, host); if (ret) goto release; diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 4f06fb03c0a2..c021d433b04f 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -648,7 +648,8 @@ static int mxs_mmc_probe(struct platform_device *pdev) /* set mmc core parameters */ mmc->ops = &mxs_mmc_ops; mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL | MMC_CAP_CMD23; + MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL | MMC_CAP_CMD23 | + MMC_CAP_ERASE; host->broken_cd = of_property_read_bool(np, "broken-cd"); diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index 8a274b91804e..3c4d950a4755 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * OpenFirmware bindings for the MMC-over-SPI driver * * Copyright (c) MontaVista Software, Inc. 2008. * * Author: Anton Vorontsov <avorontsov@ru.mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/kernel.h> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 29a1ddaa7466..952fa4063ff8 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -2077,7 +2077,7 @@ static int omap_hsmmc_runtime_suspend(struct device *dev) unsigned long flags; int ret = 0; - host = platform_get_drvdata(to_platform_device(dev)); + host = dev_get_drvdata(dev); omap_hsmmc_context_save(host); dev_dbg(dev, "disabled\n"); @@ -2118,7 +2118,7 @@ static int omap_hsmmc_runtime_resume(struct device *dev) struct omap_hsmmc_host *host; unsigned long flags; - host = platform_get_drvdata(to_platform_device(dev)); + host = dev_get_drvdata(dev); omap_hsmmc_context_restore(host); dev_dbg(dev, "enabled\n"); diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h index 8394a7bb1fc1..c0504aa90857 100644 --- a/drivers/mmc/host/renesas_sdhi.h +++ b/drivers/mmc/host/renesas_sdhi.h @@ -3,7 +3,7 @@ * Renesas Mobile SDHI * * Copyright (C) 2017 Horms Solutions Ltd., Simon Horman - * Copyright (C) 2017 Renesas Electronics Corporation + * Copyright (C) 2017-19 Renesas Electronics Corporation */ #ifndef RENESAS_SDHI_H diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index 8742e27e4e8b..5e9e36ed2107 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -2,8 +2,8 @@ /* * Renesas SDHI * - * Copyright (C) 2015-17 Renesas Electronics Corporation - * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang + * Copyright (C) 2015-19 Renesas Electronics Corporation + * Copyright (C) 2016-19 Sang Engineering, Wolfram Sang * Copyright (C) 2016-17 Horms Solutions, Simon Horman * Copyright (C) 2009 Magnus Damm * @@ -779,14 +779,14 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (ver < SDHI_VER_GEN2_SDR104 && mmc_data->max_blk_count > U16_MAX) mmc_data->max_blk_count = U16_MAX; - ret = tmio_mmc_host_probe(host); - if (ret < 0) - goto edisclk; - /* One Gen2 SDHI incarnation does NOT have a CBSY bit */ if (ver == SDHI_VER_GEN2_SDR50) mmc_data->flags &= ~TMIO_MMC_HAVE_CBSY; + ret = tmio_mmc_host_probe(host); + if (ret < 0) + goto edisclk; + /* Enable tuning iff we have an SCC and a supported mode */ if (of_data && of_data->scc_offset && (host->mmc->caps & MMC_CAP_UHS_SDR104 || diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index 9dfafa2a90a3..751fe91c7571 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -2,8 +2,9 @@ /* * DMA support for Internal DMAC with SDHI SD/SDIO controller * - * Copyright (C) 2016-17 Renesas Electronics Corporation + * Copyright (C) 2016-19 Renesas Electronics Corporation * Copyright (C) 2016-17 Horms Solutions, Simon Horman + * Copyright (C) 2018-19 Sang Engineering, Wolfram Sang */ #include <linux/bitops.h> @@ -95,8 +96,8 @@ static const struct renesas_sdhi_of_data of_rza2_compatible = { .scc_offset = 0 - 0x1000, .taps = rcar_gen3_scc_taps, .taps_num = ARRAY_SIZE(rcar_gen3_scc_taps), - /* DMAC can handle 0xffffffff blk count but only 1 segment */ - .max_blk_count = 0xffffffff, + /* DMAC can handle 32bit blk count but only 1 segment */ + .max_blk_count = UINT_MAX / TMIO_MAX_BLK_SIZE, .max_segs = 1, }; @@ -110,8 +111,8 @@ static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = { .scc_offset = 0x1000, .taps = rcar_gen3_scc_taps, .taps_num = ARRAY_SIZE(rcar_gen3_scc_taps), - /* DMAC can handle 0xffffffff blk count but only 1 segment */ - .max_blk_count = 0xffffffff, + /* DMAC can handle 32bit blk count but only 1 segment */ + .max_blk_count = UINT_MAX / TMIO_MAX_BLK_SIZE, .max_segs = 1, }; diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c index 02cd878e209f..1d29b822efb8 100644 --- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c @@ -2,8 +2,8 @@ /* * DMA support use of SYS DMAC with SDHI SD/SDIO controller * - * Copyright (C) 2016-17 Renesas Electronics Corporation - * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang + * Copyright (C) 2016-19 Renesas Electronics Corporation + * Copyright (C) 2016-19 Sang Engineering, Wolfram Sang * Copyright (C) 2017 Horms Solutions, Simon Horman * Copyright (C) 2010-2011 Guennadi Liakhovetski */ @@ -65,7 +65,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen2_compatible = { .scc_offset = 0x0300, .taps = rcar_gen2_scc_taps, .taps_num = ARRAY_SIZE(rcar_gen2_scc_taps), - .max_blk_count = 0xffffffff, + .max_blk_count = UINT_MAX / TMIO_MAX_BLK_SIZE, }; /* Definitions for sampling clocks */ diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 8dbbc1f62b70..c391510e9ef4 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -14,6 +14,7 @@ #include <linux/clk.h> #include <linux/module.h> #include <linux/slab.h> +#include <linux/pm_qos.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include <linux/mmc/sdio.h> @@ -73,6 +74,7 @@ #define ESDHC_STROBE_DLL_CTRL_ENABLE (1 << 0) #define ESDHC_STROBE_DLL_CTRL_RESET (1 << 1) #define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT 3 +#define ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT (4 << 20) #define ESDHC_STROBE_DLL_STATUS 0x74 #define ESDHC_STROBE_DLL_STS_REF_LOCK (1 << 1) @@ -156,6 +158,8 @@ #define ESDHC_FLAG_HS400_ES BIT(11) /* The IP has Host Controller Interface for Command Queuing */ #define ESDHC_FLAG_CQHCI BIT(12) +/* need request pmqos during low power */ +#define ESDHC_FLAG_PMQOS BIT(13) struct esdhc_soc_data { u32 flags; @@ -204,6 +208,12 @@ static const struct esdhc_soc_data usdhc_imx7d_data = { | ESDHC_FLAG_HS400, }; +static struct esdhc_soc_data usdhc_imx7ulp_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_PMQOS | ESDHC_FLAG_HS400, +}; + static struct esdhc_soc_data usdhc_imx8qxp_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 @@ -229,6 +239,7 @@ struct pltfm_imx_data { WAIT_FOR_INT, /* sent CMD12, waiting for response INT */ } multiblock_status; u32 is_ddr; + struct pm_qos_request pm_qos_req; }; static const struct platform_device_id imx_esdhc_devtype[] = { @@ -257,6 +268,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { { .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, }, { .compatible = "fsl,imx6ull-usdhc", .data = &usdhc_imx6ull_data, }, { .compatible = "fsl,imx7d-usdhc", .data = &usdhc_imx7d_data, }, + { .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, }, { .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, }, { /* sentinel */ } }; @@ -983,15 +995,19 @@ static void esdhc_set_strobe_dll(struct sdhci_host *host) /* force a reset on strobe dll */ writel(ESDHC_STROBE_DLL_CTRL_RESET, host->ioaddr + ESDHC_STROBE_DLL_CTRL); + /* clear the reset bit on strobe dll before any setting */ + writel(0, host->ioaddr + ESDHC_STROBE_DLL_CTRL); + /* * enable strobe dll ctrl and adjust the delay target * for the uSDHC loopback read clock */ v = ESDHC_STROBE_DLL_CTRL_ENABLE | + ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT | (7 << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT); writel(v, host->ioaddr + ESDHC_STROBE_DLL_CTRL); - /* wait 1us to make sure strobe dll status register stable */ - udelay(1); + /* wait 5us to make sure strobe dll status register stable */ + udelay(5); v = readl(host->ioaddr + ESDHC_STROBE_DLL_STATUS); if (!(v & ESDHC_STROBE_DLL_STS_REF_LOCK)) dev_warn(mmc_dev(host->mmc), @@ -1436,6 +1452,10 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) imx_data->socdata = of_id ? of_id->data : (struct esdhc_soc_data *) pdev->id_entry->driver_data; + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + pm_qos_add_request(&imx_data->pm_qos_req, + PM_QOS_CPU_DMA_LATENCY, 0); + imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(imx_data->clk_ipg)) { err = PTR_ERR(imx_data->clk_ipg); @@ -1557,6 +1577,8 @@ disable_ipg_clk: disable_per_clk: clk_disable_unprepare(imx_data->clk_per); free_sdhci: + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + pm_qos_remove_request(&imx_data->pm_qos_req); sdhci_pltfm_free(pdev); return err; } @@ -1578,6 +1600,9 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev) clk_disable_unprepare(imx_data->clk_ipg); clk_disable_unprepare(imx_data->clk_ahb); + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + pm_qos_remove_request(&imx_data->pm_qos_req); + sdhci_pltfm_free(pdev); return 0; @@ -1649,6 +1674,9 @@ static int sdhci_esdhc_runtime_suspend(struct device *dev) } clk_disable_unprepare(imx_data->clk_ahb); + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + pm_qos_remove_request(&imx_data->pm_qos_req); + return ret; } @@ -1659,9 +1687,13 @@ static int sdhci_esdhc_runtime_resume(struct device *dev) struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); int err; + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + pm_qos_add_request(&imx_data->pm_qos_req, + PM_QOS_CPU_DMA_LATENCY, 0); + err = clk_prepare_enable(imx_data->clk_ahb); if (err) - return err; + goto remove_pm_qos_request; if (!sdhci_sdio_irq_enabled(host)) { err = clk_prepare_enable(imx_data->clk_per); @@ -1690,6 +1722,9 @@ disable_per_clk: clk_disable_unprepare(imx_data->clk_per); disable_ahb_clk: clk_disable_unprepare(imx_data->clk_ahb); +remove_pm_qos_request: + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + pm_qos_remove_request(&imx_data->pm_qos_req); return err; } #endif diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index c9e3e050ccc8..88dc3f00a5be 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -832,7 +832,10 @@ static int sdhci_arasan_probe(struct platform_device *pdev) host->mmc_host_ops.start_signal_voltage_switch = sdhci_arasan_voltage_switch; sdhci_arasan->has_cqe = true; - host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + host->mmc->caps2 |= MMC_CAP2_CQE; + + if (!of_property_read_bool(np, "disable-cqe-dcmd")) + host->mmc->caps2 |= MMC_CAP2_CQE_DCMD; } ret = sdhci_arasan_add_host(sdhci_arasan); diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 4e669b4edfc1..e20c00f14109 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -24,6 +24,7 @@ #include <linux/ktime.h> #include <linux/dma-mapping.h> #include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" @@ -81,6 +82,7 @@ struct sdhci_esdhc { bool quirk_limited_clk_division; bool quirk_unreliable_pulse_detection; bool quirk_fixup_tuning; + bool quirk_ignore_data_inhibit; unsigned int peripheral_clock; const struct esdhc_clk_fixup *clk_fixup; u32 div_ratio; @@ -147,6 +149,19 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host, return ret; } + /* + * Some controllers have unreliable Data Line Active + * bit for commands with busy signal. This affects + * Command Inhibit (data) bit. Just ignore it since + * MMC core driver has already polled card status + * with CMD13 after any command with busy siganl. + */ + if ((spec_reg == SDHCI_PRESENT_STATE) && + (esdhc->quirk_ignore_data_inhibit == true)) { + ret = value & ~SDHCI_DATA_INHIBIT; + return ret; + } + ret = value; return ret; } @@ -694,6 +709,9 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask) sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) + mdelay(5); + if (mask & SDHCI_RESET_ALL) { val = sdhci_readl(host, ESDHC_TBCTL); val &= ~ESDHC_TB_EN; @@ -864,6 +882,25 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, sdhci_set_uhs_signaling(host, timing); } +static u32 esdhc_irq(struct sdhci_host *host, u32 intmask) +{ + u32 command; + + if (of_find_compatible_node(NULL, NULL, + "fsl,p2020-esdhc")) { + command = SDHCI_GET_CMD(sdhci_readw(host, + SDHCI_COMMAND)); + if (command == MMC_WRITE_MULTIPLE_BLOCK && + sdhci_readw(host, SDHCI_BLOCK_COUNT) && + intmask & SDHCI_INT_DATA_END) { + intmask &= ~SDHCI_INT_DATA_END; + sdhci_writel(host, SDHCI_INT_DATA_END, + SDHCI_INT_STATUS); + } + } + return intmask; +} + #ifdef CONFIG_PM_SLEEP static u32 esdhc_proctl; static int esdhc_of_suspend(struct device *dev) @@ -911,6 +948,7 @@ static const struct sdhci_ops sdhci_esdhc_be_ops = { .set_bus_width = esdhc_pltfm_set_bus_width, .reset = esdhc_reset, .set_uhs_signaling = esdhc_set_uhs_signaling, + .irq = esdhc_irq, }; static const struct sdhci_ops sdhci_esdhc_le_ops = { @@ -928,6 +966,7 @@ static const struct sdhci_ops sdhci_esdhc_le_ops = { .set_bus_width = esdhc_pltfm_set_bus_width, .reset = esdhc_reset, .set_uhs_signaling = esdhc_set_uhs_signaling, + .irq = esdhc_irq, }; static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = { @@ -955,6 +994,7 @@ static struct soc_device_attribute soc_incorrect_hostver[] = { static struct soc_device_attribute soc_fixup_sdhc_clkdivs[] = { { .family = "QorIQ LX2160A", .revision = "1.0", }, + { .family = "QorIQ LX2160A", .revision = "2.0", }, { }, }; @@ -1074,6 +1114,11 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) if (esdhc->vendor_ver > VENDOR_V_22) host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; + if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) { + host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST; + host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + } + if (of_device_is_compatible(np, "fsl,p5040-esdhc") || of_device_is_compatible(np, "fsl,p5020-esdhc") || of_device_is_compatible(np, "fsl,p4080-esdhc") || @@ -1084,12 +1129,14 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) if (of_device_is_compatible(np, "fsl,ls1021a-esdhc")) host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + esdhc->quirk_ignore_data_inhibit = false; if (of_device_is_compatible(np, "fsl,p2020-esdhc")) { /* * Freescale messed up with P2020 as it has a non-standard * host control register */ host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL; + esdhc->quirk_ignore_data_inhibit = true; } /* call to generic mmc_of_parse to support additional capabilities */ diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c index 9f20fff9781b..bdb80c503fde 100644 --- a/drivers/mmc/host/sdhci-omap.c +++ b/drivers/mmc/host/sdhci-omap.c @@ -785,7 +785,7 @@ static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host, sdhci_omap_start_clock(omap_host); } -void sdhci_omap_reset(struct sdhci_host *host, u8 mask) +static void sdhci_omap_reset(struct sdhci_host *host, u8 mask) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host); diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 99b0fec2836b..ab9e2b901094 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -31,6 +31,10 @@ #include <linux/mmc/sdhci-pci-data.h> #include <linux/acpi.h> +#ifdef CONFIG_X86 +#include <asm/iosf_mbi.h> +#endif + #include "cqhci.h" #include "sdhci.h" @@ -451,6 +455,50 @@ static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = { .probe_slot = pch_hc_probe_slot, }; +#ifdef CONFIG_X86 + +#define BYT_IOSF_SCCEP 0x63 +#define BYT_IOSF_OCP_NETCTRL0 0x1078 +#define BYT_IOSF_OCP_TIMEOUT_BASE GENMASK(10, 8) + +static void byt_ocp_setting(struct pci_dev *pdev) +{ + u32 val = 0; + + if (pdev->device != PCI_DEVICE_ID_INTEL_BYT_EMMC && + pdev->device != PCI_DEVICE_ID_INTEL_BYT_SDIO && + pdev->device != PCI_DEVICE_ID_INTEL_BYT_SD && + pdev->device != PCI_DEVICE_ID_INTEL_BYT_EMMC2) + return; + + if (iosf_mbi_read(BYT_IOSF_SCCEP, MBI_CR_READ, BYT_IOSF_OCP_NETCTRL0, + &val)) { + dev_err(&pdev->dev, "%s read error\n", __func__); + return; + } + + if (!(val & BYT_IOSF_OCP_TIMEOUT_BASE)) + return; + + val &= ~BYT_IOSF_OCP_TIMEOUT_BASE; + + if (iosf_mbi_write(BYT_IOSF_SCCEP, MBI_CR_WRITE, BYT_IOSF_OCP_NETCTRL0, + val)) { + dev_err(&pdev->dev, "%s write error\n", __func__); + return; + } + + dev_dbg(&pdev->dev, "%s completed\n", __func__); +} + +#else + +static inline void byt_ocp_setting(struct pci_dev *pdev) +{ +} + +#endif + enum { INTEL_DSM_FNS = 0, INTEL_DSM_V18_SWITCH = 3, @@ -715,6 +763,8 @@ static void byt_probe_slot(struct sdhci_pci_slot *slot) byt_read_dsm(slot); + byt_ocp_setting(slot->chip->pdev); + ops->execute_tuning = intel_execute_tuning; ops->start_signal_voltage_switch = intel_start_signal_voltage_switch; @@ -938,7 +988,35 @@ static int byt_sd_probe_slot(struct sdhci_pci_slot *slot) return 0; } +#ifdef CONFIG_PM_SLEEP + +static int byt_resume(struct sdhci_pci_chip *chip) +{ + byt_ocp_setting(chip->pdev); + + return sdhci_pci_resume_host(chip); +} + +#endif + +#ifdef CONFIG_PM + +static int byt_runtime_resume(struct sdhci_pci_chip *chip) +{ + byt_ocp_setting(chip->pdev); + + return sdhci_pci_runtime_resume_host(chip); +} + +#endif + static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = { +#ifdef CONFIG_PM_SLEEP + .resume = byt_resume, +#endif +#ifdef CONFIG_PM + .runtime_resume = byt_runtime_resume, +#endif .allow_runtime_pm = true, .probe_slot = byt_emmc_probe_slot, .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | @@ -972,6 +1050,12 @@ static const struct sdhci_pci_fixes sdhci_intel_glk_emmc = { }; static const struct sdhci_pci_fixes sdhci_ni_byt_sdio = { +#ifdef CONFIG_PM_SLEEP + .resume = byt_resume, +#endif +#ifdef CONFIG_PM + .runtime_resume = byt_runtime_resume, +#endif .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | SDHCI_QUIRK_NO_LED, .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON | @@ -983,6 +1067,12 @@ static const struct sdhci_pci_fixes sdhci_ni_byt_sdio = { }; static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = { +#ifdef CONFIG_PM_SLEEP + .resume = byt_resume, +#endif +#ifdef CONFIG_PM + .runtime_resume = byt_runtime_resume, +#endif .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | SDHCI_QUIRK_NO_LED, .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON | @@ -994,6 +1084,12 @@ static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = { }; static const struct sdhci_pci_fixes sdhci_intel_byt_sd = { +#ifdef CONFIG_PM_SLEEP + .resume = byt_resume, +#endif +#ifdef CONFIG_PM + .runtime_resume = byt_runtime_resume, +#endif .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | SDHCI_QUIRK_NO_LED, .quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON | @@ -1576,6 +1672,8 @@ static const struct pci_device_id pci_ids[] = { SDHCI_PCI_DEVICE(INTEL, CNPH_SD, intel_byt_sd), SDHCI_PCI_DEVICE(INTEL, ICP_EMMC, intel_glk_emmc), SDHCI_PCI_DEVICE(INTEL, ICP_SD, intel_byt_sd), + SDHCI_PCI_DEVICE(INTEL, CML_EMMC, intel_glk_emmc), + SDHCI_PCI_DEVICE(INTEL, CML_SD, intel_byt_sd), SDHCI_PCI_DEVICE(O2, 8120, o2), SDHCI_PCI_DEVICE(O2, 8220, o2), SDHCI_PCI_DEVICE(O2, 8221, o2), diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index 4ddb69a15cd7..e5dc6e44c7a4 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -50,6 +50,8 @@ #define PCI_DEVICE_ID_INTEL_CNPH_SD 0xa375 #define PCI_DEVICE_ID_INTEL_ICP_EMMC 0x34c4 #define PCI_DEVICE_ID_INTEL_ICP_SD 0x34f8 +#define PCI_DEVICE_ID_INTEL_CML_EMMC 0x02c4 +#define PCI_DEVICE_ID_INTEL_CML_SD 0x02f5 #define PCI_DEVICE_ID_SYSKONNECT_8000 0x8000 #define PCI_DEVICE_ID_VIA_95D0 0x95d0 diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 32e62904c0d3..f608417ae967 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -66,6 +66,22 @@ #define SDHCI_VNDR_TUN_CTRL0_0 0x1c0 #define SDHCI_VNDR_TUN_CTRL0_TUN_HW_TAP 0x20000 +#define SDHCI_VNDR_TUN_CTRL0_START_TAP_VAL_MASK 0x03fc0000 +#define SDHCI_VNDR_TUN_CTRL0_START_TAP_VAL_SHIFT 18 +#define SDHCI_VNDR_TUN_CTRL0_MUL_M_MASK 0x00001fc0 +#define SDHCI_VNDR_TUN_CTRL0_MUL_M_SHIFT 6 +#define SDHCI_VNDR_TUN_CTRL0_TUN_ITER_MASK 0x000e000 +#define SDHCI_VNDR_TUN_CTRL0_TUN_ITER_SHIFT 13 +#define TRIES_128 2 +#define TRIES_256 4 +#define SDHCI_VNDR_TUN_CTRL0_TUN_WORD_SEL_MASK 0x7 + +#define SDHCI_TEGRA_VNDR_TUN_CTRL1_0 0x1c4 +#define SDHCI_TEGRA_VNDR_TUN_STATUS0 0x1C8 +#define SDHCI_TEGRA_VNDR_TUN_STATUS1 0x1CC +#define SDHCI_TEGRA_VNDR_TUN_STATUS1_TAP_MASK 0xFF +#define SDHCI_TEGRA_VNDR_TUN_STATUS1_END_TAP_SHIFT 0x8 +#define TUNING_WORD_BIT_SIZE 32 #define SDHCI_TEGRA_AUTO_CAL_CONFIG 0x1e4 #define SDHCI_AUTO_CAL_START BIT(31) @@ -90,6 +106,7 @@ #define NVQUIRK_HAS_PADCALIB BIT(6) #define NVQUIRK_NEEDS_PAD_CONTROL BIT(7) #define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP BIT(8) +#define NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING BIT(9) /* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */ #define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000 @@ -97,6 +114,8 @@ struct sdhci_tegra_soc_data { const struct sdhci_pltfm_data *pdata; u32 nvquirks; + u8 min_tap_delay; + u8 max_tap_delay; }; /* Magic pull up and pull down pad calibration offsets */ @@ -136,6 +155,8 @@ struct sdhci_tegra { u32 default_trim; u32 dqs_trim; bool enable_hwcq; + unsigned long curr_clk_rate; + u8 tuned_tap_delay; }; static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg) @@ -241,6 +262,7 @@ static void tegra210_sdhci_writew(struct sdhci_host *host, u16 val, int reg) if (is_tuning_cmd) { udelay(1); + sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); tegra_sdhci_configure_card_clk(host, clk_enabled); } } @@ -722,6 +744,7 @@ static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock) */ host_clk = tegra_host->ddr_signaling ? clock * 2 : clock; clk_set_rate(pltfm_host->clk, host_clk); + tegra_host->curr_clk_rate = host_clk; if (tegra_host->ddr_signaling) host->max_clk = host_clk; else @@ -770,6 +793,159 @@ static void tegra_sdhci_hs400_dll_cal(struct sdhci_host *host) "HS400 delay line calibration timed out\n"); } +static void tegra_sdhci_tap_correction(struct sdhci_host *host, u8 thd_up, + u8 thd_low, u8 fixed_tap) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host); + u32 val, tun_status; + u8 word, bit, edge1, tap, window; + bool tap_result; + bool start_fail = false; + bool start_pass = false; + bool end_pass = false; + bool first_fail = false; + bool first_pass = false; + u8 start_pass_tap = 0; + u8 end_pass_tap = 0; + u8 first_fail_tap = 0; + u8 first_pass_tap = 0; + u8 total_tuning_words = host->tuning_loop_count / TUNING_WORD_BIT_SIZE; + + /* + * Read auto-tuned results and extract good valid passing window by + * filtering out un-wanted bubble/partial/merged windows. + */ + for (word = 0; word < total_tuning_words; word++) { + val = sdhci_readl(host, SDHCI_VNDR_TUN_CTRL0_0); + val &= ~SDHCI_VNDR_TUN_CTRL0_TUN_WORD_SEL_MASK; + val |= word; + sdhci_writel(host, val, SDHCI_VNDR_TUN_CTRL0_0); + tun_status = sdhci_readl(host, SDHCI_TEGRA_VNDR_TUN_STATUS0); + bit = 0; + while (bit < TUNING_WORD_BIT_SIZE) { + tap = word * TUNING_WORD_BIT_SIZE + bit; + tap_result = tun_status & (1 << bit); + if (!tap_result && !start_fail) { + start_fail = true; + if (!first_fail) { + first_fail_tap = tap; + first_fail = true; + } + + } else if (tap_result && start_fail && !start_pass) { + start_pass_tap = tap; + start_pass = true; + if (!first_pass) { + first_pass_tap = tap; + first_pass = true; + } + + } else if (!tap_result && start_fail && start_pass && + !end_pass) { + end_pass_tap = tap - 1; + end_pass = true; + } else if (tap_result && start_pass && start_fail && + end_pass) { + window = end_pass_tap - start_pass_tap; + /* discard merged window and bubble window */ + if (window >= thd_up || window < thd_low) { + start_pass_tap = tap; + end_pass = false; + } else { + /* set tap at middle of valid window */ + tap = start_pass_tap + window / 2; + tegra_host->tuned_tap_delay = tap; + return; + } + } + + bit++; + } + } + + if (!first_fail) { + WARN_ON("no edge detected, continue with hw tuned delay.\n"); + } else if (first_pass) { + /* set tap location at fixed tap relative to the first edge */ + edge1 = first_fail_tap + (first_pass_tap - first_fail_tap) / 2; + if (edge1 - 1 > fixed_tap) + tegra_host->tuned_tap_delay = edge1 - fixed_tap; + else + tegra_host->tuned_tap_delay = edge1 + fixed_tap; + } +} + +static void tegra_sdhci_post_tuning(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host); + const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; + u32 avg_tap_dly, val, min_tap_dly, max_tap_dly; + u8 fixed_tap, start_tap, end_tap, window_width; + u8 thdupper, thdlower; + u8 num_iter; + u32 clk_rate_mhz, period_ps, bestcase, worstcase; + + /* retain HW tuned tap to use incase if no correction is needed */ + val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL); + tegra_host->tuned_tap_delay = (val & SDHCI_CLOCK_CTRL_TAP_MASK) >> + SDHCI_CLOCK_CTRL_TAP_SHIFT; + if (soc_data->min_tap_delay && soc_data->max_tap_delay) { + min_tap_dly = soc_data->min_tap_delay; + max_tap_dly = soc_data->max_tap_delay; + clk_rate_mhz = tegra_host->curr_clk_rate / USEC_PER_SEC; + period_ps = USEC_PER_SEC / clk_rate_mhz; + bestcase = period_ps / min_tap_dly; + worstcase = period_ps / max_tap_dly; + /* + * Upper and Lower bound thresholds used to detect merged and + * bubble windows + */ + thdupper = (2 * worstcase + bestcase) / 2; + thdlower = worstcase / 4; + /* + * fixed tap is used when HW tuning result contains single edge + * and tap is set at fixed tap delay relative to the first edge + */ + avg_tap_dly = (period_ps * 2) / (min_tap_dly + max_tap_dly); + fixed_tap = avg_tap_dly / 2; + + val = sdhci_readl(host, SDHCI_TEGRA_VNDR_TUN_STATUS1); + start_tap = val & SDHCI_TEGRA_VNDR_TUN_STATUS1_TAP_MASK; + end_tap = (val >> SDHCI_TEGRA_VNDR_TUN_STATUS1_END_TAP_SHIFT) & + SDHCI_TEGRA_VNDR_TUN_STATUS1_TAP_MASK; + window_width = end_tap - start_tap; + num_iter = host->tuning_loop_count; + /* + * partial window includes edges of the tuning range. + * merged window includes more taps so window width is higher + * than upper threshold. + */ + if (start_tap == 0 || (end_tap == (num_iter - 1)) || + (end_tap == num_iter - 2) || window_width >= thdupper) { + pr_debug("%s: Apply tuning correction\n", + mmc_hostname(host->mmc)); + tegra_sdhci_tap_correction(host, thdupper, thdlower, + fixed_tap); + } + } + + tegra_sdhci_set_tap(host, tegra_host->tuned_tap_delay); +} + +static int tegra_sdhci_execute_hw_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + int err; + + err = sdhci_execute_tuning(mmc, opcode); + if (!err && !host->tuning_err) + tegra_sdhci_post_tuning(host); + + return err; +} + static void tegra_sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing) { @@ -778,16 +954,22 @@ static void tegra_sdhci_set_uhs_signaling(struct sdhci_host *host, bool set_default_tap = false; bool set_dqs_trim = false; bool do_hs400_dll_cal = false; + u8 iter = TRIES_256; + u32 val; + tegra_host->ddr_signaling = false; switch (timing) { case MMC_TIMING_UHS_SDR50: + break; case MMC_TIMING_UHS_SDR104: case MMC_TIMING_MMC_HS200: /* Don't set default tap on tunable modes. */ + iter = TRIES_128; break; case MMC_TIMING_MMC_HS400: set_dqs_trim = true; do_hs400_dll_cal = true; + iter = TRIES_128; break; case MMC_TIMING_MMC_DDR52: case MMC_TIMING_UHS_DDR50: @@ -799,11 +981,25 @@ static void tegra_sdhci_set_uhs_signaling(struct sdhci_host *host, break; } + val = sdhci_readl(host, SDHCI_VNDR_TUN_CTRL0_0); + val &= ~(SDHCI_VNDR_TUN_CTRL0_TUN_ITER_MASK | + SDHCI_VNDR_TUN_CTRL0_START_TAP_VAL_MASK | + SDHCI_VNDR_TUN_CTRL0_MUL_M_MASK); + val |= (iter << SDHCI_VNDR_TUN_CTRL0_TUN_ITER_SHIFT | + 0 << SDHCI_VNDR_TUN_CTRL0_START_TAP_VAL_SHIFT | + 1 << SDHCI_VNDR_TUN_CTRL0_MUL_M_SHIFT); + sdhci_writel(host, val, SDHCI_VNDR_TUN_CTRL0_0); + sdhci_writel(host, 0, SDHCI_TEGRA_VNDR_TUN_CTRL1_0); + + host->tuning_loop_count = (iter == TRIES_128) ? 128 : 256; + sdhci_set_uhs_signaling(host, timing); tegra_sdhci_pad_autocalib(host); - if (set_default_tap) + if (tegra_host->tuned_tap_delay && !set_default_tap) + tegra_sdhci_set_tap(host, tegra_host->tuned_tap_delay); + else tegra_sdhci_set_tap(host, tegra_host->default_tap); if (set_dqs_trim) @@ -928,23 +1124,86 @@ static void tegra_sdhci_voltage_switch(struct sdhci_host *host) tegra_host->pad_calib_required = true; } +static void tegra_cqhci_writel(struct cqhci_host *cq_host, u32 val, int reg) +{ + struct mmc_host *mmc = cq_host->mmc; + u8 ctrl; + ktime_t timeout; + bool timed_out; + + /* + * During CQE resume/unhalt, CQHCI driver unhalts CQE prior to + * cqhci_host_ops enable where SDHCI DMA and BLOCK_SIZE registers need + * to be re-configured. + * Tegra CQHCI/SDHCI prevents write access to block size register when + * CQE is unhalted. So handling CQE resume sequence here to configure + * SDHCI block registers prior to exiting CQE halt state. + */ + if (reg == CQHCI_CTL && !(val & CQHCI_HALT) && + cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT) { + sdhci_cqe_enable(mmc); + writel(val, cq_host->mmio + reg); + timeout = ktime_add_us(ktime_get(), 50); + while (1) { + timed_out = ktime_compare(ktime_get(), timeout) > 0; + ctrl = cqhci_readl(cq_host, CQHCI_CTL); + if (!(ctrl & CQHCI_HALT) || timed_out) + break; + } + /* + * CQE usually resumes very quick, but incase if Tegra CQE + * doesn't resume retry unhalt. + */ + if (timed_out) + writel(val, cq_host->mmio + reg); + } else { + writel(val, cq_host->mmio + reg); + } +} + +static void sdhci_tegra_update_dcmd_desc(struct mmc_host *mmc, + struct mmc_request *mrq, u64 *data) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(mmc_priv(mmc)); + struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host); + const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; + + if (soc_data->nvquirks & NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING && + mrq->cmd->flags & MMC_RSP_R1B) + *data |= CQHCI_CMD_TIMING(1); +} + static void sdhci_tegra_cqe_enable(struct mmc_host *mmc) { struct cqhci_host *cq_host = mmc->cqe_private; - u32 cqcfg = 0; + u32 val; /* - * Tegra SDMMC Controller design prevents write access to BLOCK_COUNT - * registers when CQE is enabled. + * Tegra CQHCI/SDMMC design prevents write access to sdhci block size + * register when CQE is enabled and unhalted. + * CQHCI driver enables CQE prior to activation, so disable CQE before + * programming block size in sdhci controller and enable it back. */ - cqcfg = cqhci_readl(cq_host, CQHCI_CFG); - if (cqcfg & CQHCI_ENABLE) - cqhci_writel(cq_host, (cqcfg & ~CQHCI_ENABLE), CQHCI_CFG); - - sdhci_cqe_enable(mmc); + if (!cq_host->activated) { + val = cqhci_readl(cq_host, CQHCI_CFG); + if (val & CQHCI_ENABLE) + cqhci_writel(cq_host, (val & ~CQHCI_ENABLE), + CQHCI_CFG); + sdhci_cqe_enable(mmc); + if (val & CQHCI_ENABLE) + cqhci_writel(cq_host, val, CQHCI_CFG); + } - if (cqcfg & CQHCI_ENABLE) - cqhci_writel(cq_host, cqcfg, CQHCI_CFG); + /* + * CMD CRC errors are seen sometimes with some eMMC devices when status + * command is sent during transfer of last data block which is the + * default case as send status command block counter (CBC) is 1. + * Recommended fix to set CBC to 0 allowing send status command only + * when data lines are idle. + */ + val = cqhci_readl(cq_host, CQHCI_SSC1); + val &= ~CQHCI_SSC1_CBC_MASK; + cqhci_writel(cq_host, val, CQHCI_SSC1); } static void sdhci_tegra_dumpregs(struct mmc_host *mmc) @@ -966,9 +1225,11 @@ static u32 sdhci_tegra_cqhci_irq(struct sdhci_host *host, u32 intmask) } static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = { + .write_l = tegra_cqhci_writel, .enable = sdhci_tegra_cqe_enable, .disable = sdhci_cqe_disable, .dumpregs = sdhci_tegra_dumpregs, + .update_dcmd_desc = sdhci_tegra_update_dcmd_desc, }; static const struct sdhci_ops tegra_sdhci_ops = { @@ -1109,6 +1370,8 @@ static const struct sdhci_tegra_soc_data soc_data_tegra210 = { NVQUIRK_DIS_CARD_CLK_CONFIG_TAP | NVQUIRK_ENABLE_SDR50 | NVQUIRK_ENABLE_SDR104, + .min_tap_delay = 106, + .max_tap_delay = 185, }; static const struct sdhci_ops tegra186_sdhci_ops = { @@ -1148,10 +1411,25 @@ static const struct sdhci_tegra_soc_data soc_data_tegra186 = { NVQUIRK_HAS_PADCALIB | NVQUIRK_DIS_CARD_CLK_CONFIG_TAP | NVQUIRK_ENABLE_SDR50 | + NVQUIRK_ENABLE_SDR104 | + NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING, + .min_tap_delay = 84, + .max_tap_delay = 136, +}; + +static const struct sdhci_tegra_soc_data soc_data_tegra194 = { + .pdata = &sdhci_tegra186_pdata, + .nvquirks = NVQUIRK_NEEDS_PAD_CONTROL | + NVQUIRK_HAS_PADCALIB | + NVQUIRK_DIS_CARD_CLK_CONFIG_TAP | + NVQUIRK_ENABLE_SDR50 | NVQUIRK_ENABLE_SDR104, + .min_tap_delay = 96, + .max_tap_delay = 139, }; static const struct of_device_id sdhci_tegra_dt_match[] = { + { .compatible = "nvidia,tegra194-sdhci", .data = &soc_data_tegra194 }, { .compatible = "nvidia,tegra186-sdhci", .data = &soc_data_tegra186 }, { .compatible = "nvidia,tegra210-sdhci", .data = &soc_data_tegra210 }, { .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra124 }, @@ -1250,6 +1528,10 @@ static int sdhci_tegra_probe(struct platform_device *pdev) host->mmc_host_ops.hs400_enhanced_strobe = tegra_sdhci_hs400_enhanced_strobe; + if (!host->ops->platform_execute_tuning) + host->mmc_host_ops.execute_tuning = + tegra_sdhci_execute_hw_tuning; + rc = mmc_of_parse(host->mmc); if (rc) goto err_parse_dt; @@ -1329,11 +1611,67 @@ static int sdhci_tegra_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int __maybe_unused sdhci_tegra_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + int ret; + + if (host->mmc->caps2 & MMC_CAP2_CQE) { + ret = cqhci_suspend(host->mmc); + if (ret) + return ret; + } + + ret = sdhci_suspend_host(host); + if (ret) { + cqhci_resume(host->mmc); + return ret; + } + + clk_disable_unprepare(pltfm_host->clk); + return 0; +} + +static int __maybe_unused sdhci_tegra_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + int ret; + + ret = clk_prepare_enable(pltfm_host->clk); + if (ret) + return ret; + + ret = sdhci_resume_host(host); + if (ret) + goto disable_clk; + + if (host->mmc->caps2 & MMC_CAP2_CQE) { + ret = cqhci_resume(host->mmc); + if (ret) + goto suspend_host; + } + + return 0; + +suspend_host: + sdhci_suspend_host(host); +disable_clk: + clk_disable_unprepare(pltfm_host->clk); + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(sdhci_tegra_dev_pm_ops, sdhci_tegra_suspend, + sdhci_tegra_resume); + static struct platform_driver sdhci_tegra_driver = { .driver = { .name = "sdhci-tegra", .of_match_table = sdhci_tegra_dt_match, - .pm = &sdhci_pltfm_pmops, + .pm = &sdhci_tegra_dev_pm_ops, }, .probe = sdhci_tegra_probe, .remove = sdhci_tegra_remove, diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 42e1bad024f4..97158344b862 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -446,6 +446,28 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host) #endif +static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, + unsigned long timeout) +{ + if (sdhci_data_line_cmd(mrq->cmd)) + mod_timer(&host->data_timer, timeout); + else + mod_timer(&host->timer, timeout); +} + +static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq) +{ + if (sdhci_data_line_cmd(mrq->cmd)) + del_timer(&host->data_timer); + else + del_timer(&host->timer); +} + +static inline bool sdhci_has_requests(struct sdhci_host *host) +{ + return host->cmd || host->data_cmd; +} + /*****************************************************************************\ * * * Core functions * @@ -1221,6 +1243,18 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) { int i; + if (host->cmd && host->cmd->mrq == mrq) + host->cmd = NULL; + + if (host->data_cmd && host->data_cmd->mrq == mrq) + host->data_cmd = NULL; + + if (host->data && host->data->mrq == mrq) + host->data = NULL; + + if (sdhci_needs_reset(host, mrq)) + host->pending_reset = true; + for (i = 0; i < SDHCI_MAX_MRQS; i++) { if (host->mrqs_done[i] == mrq) { WARN_ON(1); @@ -1237,24 +1271,17 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) WARN_ON(i >= SDHCI_MAX_MRQS); - tasklet_schedule(&host->finish_tasklet); + sdhci_del_timer(host, mrq); + + if (!sdhci_has_requests(host)) + sdhci_led_deactivate(host); } static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) { - if (host->cmd && host->cmd->mrq == mrq) - host->cmd = NULL; - - if (host->data_cmd && host->data_cmd->mrq == mrq) - host->data_cmd = NULL; - - if (host->data && host->data->mrq == mrq) - host->data = NULL; - - if (sdhci_needs_reset(host, mrq)) - host->pending_reset = true; - __sdhci_finish_mrq(host, mrq); + + queue_work(host->complete_wq, &host->complete_work); } static void sdhci_finish_data(struct sdhci_host *host) @@ -1305,34 +1332,17 @@ static void sdhci_finish_data(struct sdhci_host *host) * responsibility to send the stop command if required. */ if (data->mrq->cap_cmd_during_tfr) { - sdhci_finish_mrq(host, data->mrq); + __sdhci_finish_mrq(host, data->mrq); } else { /* Avoid triggering warning in sdhci_send_command() */ host->cmd = NULL; sdhci_send_command(host, data->stop); } } else { - sdhci_finish_mrq(host, data->mrq); + __sdhci_finish_mrq(host, data->mrq); } } -static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, - unsigned long timeout) -{ - if (sdhci_data_line_cmd(mrq->cmd)) - mod_timer(&host->data_timer, timeout); - else - mod_timer(&host->timer, timeout); -} - -static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq) -{ - if (sdhci_data_line_cmd(mrq->cmd)) - del_timer(&host->data_timer); - else - del_timer(&host->timer); -} - void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) { int flags; @@ -1492,7 +1502,7 @@ static void sdhci_finish_command(struct sdhci_host *host) sdhci_finish_data(host); if (!cmd->data) - sdhci_finish_mrq(host, cmd->mrq); + __sdhci_finish_mrq(host, cmd->mrq); } } @@ -2364,9 +2374,9 @@ static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) /* * Issue opcode repeatedly till Execute Tuning is set to 0 or the number - * of loops reaches 40 times. + * of loops reaches tuning loop count. */ - for (i = 0; i < MAX_TUNING_LOOP; i++) { + for (i = 0; i < host->tuning_loop_count; i++) { u16 ctrl; sdhci_send_tuning(host, opcode); @@ -2523,11 +2533,6 @@ static void sdhci_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) sdhci_pre_dma_transfer(host, mrq->data, COOKIE_PRE_MAPPED); } -static inline bool sdhci_has_requests(struct sdhci_host *host) -{ - return host->cmd || host->data_cmd; -} - static void sdhci_error_out_mrqs(struct sdhci_host *host, int err) { if (host->data_cmd) { @@ -2589,7 +2594,7 @@ static const struct mmc_host_ops sdhci_ops = { /*****************************************************************************\ * * - * Tasklets * + * Request done * * * \*****************************************************************************/ @@ -2612,8 +2617,6 @@ static bool sdhci_request_done(struct sdhci_host *host) return true; } - sdhci_del_timer(host, mrq); - /* * Always unmap the data buffers if they were mapped by * sdhci_prepare_data() whenever we finish with a request. @@ -2695,9 +2698,6 @@ static bool sdhci_request_done(struct sdhci_host *host) host->pending_reset = false; } - if (!sdhci_has_requests(host)) - sdhci_led_deactivate(host); - host->mrqs_done[i] = NULL; spin_unlock_irqrestore(&host->lock, flags); @@ -2707,9 +2707,10 @@ static bool sdhci_request_done(struct sdhci_host *host) return false; } -static void sdhci_tasklet_finish(unsigned long param) +static void sdhci_complete_work(struct work_struct *work) { - struct sdhci_host *host = (struct sdhci_host *)param; + struct sdhci_host *host = container_of(work, struct sdhci_host, + complete_work); while (!sdhci_request_done(host)) ; @@ -2754,6 +2755,7 @@ static void sdhci_timeout_data_timer(struct timer_list *t) if (host->data) { host->data->error = -ETIMEDOUT; sdhci_finish_data(host); + queue_work(host->complete_wq, &host->complete_work); } else if (host->data_cmd) { host->data_cmd->error = -ETIMEDOUT; sdhci_finish_mrq(host, host->data_cmd->mrq); @@ -2819,7 +2821,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p) return; } - sdhci_finish_mrq(host, host->cmd->mrq); + __sdhci_finish_mrq(host, host->cmd->mrq); return; } @@ -2833,7 +2835,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p) if (mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) { mrq->sbc->error = err; - sdhci_finish_mrq(host, mrq); + __sdhci_finish_mrq(host, mrq); return; } } @@ -2897,7 +2899,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (intmask & SDHCI_INT_DATA_TIMEOUT) { host->data_cmd = NULL; data_cmd->error = -ETIMEDOUT; - sdhci_finish_mrq(host, data_cmd->mrq); + __sdhci_finish_mrq(host, data_cmd->mrq); return; } if (intmask & SDHCI_INT_DATA_END) { @@ -2910,7 +2912,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (host->cmd == data_cmd) return; - sdhci_finish_mrq(host, data_cmd->mrq); + __sdhci_finish_mrq(host, data_cmd->mrq); return; } } @@ -2993,12 +2995,24 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) } } +static inline bool sdhci_defer_done(struct sdhci_host *host, + struct mmc_request *mrq) +{ + struct mmc_data *data = mrq->data; + + return host->pending_reset || + ((host->flags & SDHCI_REQ_USE_DMA) && data && + data->host_cookie == COOKIE_MAPPED); +} + static irqreturn_t sdhci_irq(int irq, void *dev_id) { + struct mmc_request *mrqs_done[SDHCI_MAX_MRQS] = {0}; irqreturn_t result = IRQ_NONE; struct sdhci_host *host = dev_id; u32 intmask, mask, unexpected = 0; int max_loops = 16; + int i; spin_lock(&host->lock); @@ -3092,9 +3106,30 @@ cont: intmask = sdhci_readl(host, SDHCI_INT_STATUS); } while (intmask && --max_loops); + + /* Determine if mrqs can be completed immediately */ + for (i = 0; i < SDHCI_MAX_MRQS; i++) { + struct mmc_request *mrq = host->mrqs_done[i]; + + if (!mrq) + continue; + + if (sdhci_defer_done(host, mrq)) { + result = IRQ_WAKE_THREAD; + } else { + mrqs_done[i] = mrq; + host->mrqs_done[i] = NULL; + } + } out: spin_unlock(&host->lock); + /* Process mrqs ready for immediate completion */ + for (i = 0; i < SDHCI_MAX_MRQS; i++) { + if (mrqs_done[i]) + mmc_request_done(host->mmc, mrqs_done[i]); + } + if (unexpected) { pr_err("%s: Unexpected interrupt 0x%08x.\n", mmc_hostname(host->mmc), unexpected); @@ -3110,6 +3145,9 @@ static irqreturn_t sdhci_thread_irq(int irq, void *dev_id) unsigned long flags; u32 isr; + while (!sdhci_request_done(host)) + ; + spin_lock_irqsave(&host->lock, flags); isr = host->thread_isr; host->thread_isr = 0; @@ -3131,7 +3169,7 @@ static irqreturn_t sdhci_thread_irq(int irq, void *dev_id) spin_unlock_irqrestore(&host->lock, flags); } - return isr ? IRQ_HANDLED : IRQ_NONE; + return IRQ_HANDLED; } /*****************************************************************************\ @@ -3483,6 +3521,7 @@ struct sdhci_host *sdhci_alloc_host(struct device *dev, host->cqe_err_ier = SDHCI_CQE_INT_ERR_MASK; host->tuning_delay = -1; + host->tuning_loop_count = MAX_TUNING_LOOP; host->sdma_boundary = SDHCI_DEFAULT_BOUNDARY_ARG; @@ -4213,14 +4252,15 @@ EXPORT_SYMBOL_GPL(sdhci_cleanup_host); int __sdhci_add_host(struct sdhci_host *host) { + unsigned int flags = WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_HIGHPRI; struct mmc_host *mmc = host->mmc; int ret; - /* - * Init tasklets. - */ - tasklet_init(&host->finish_tasklet, - sdhci_tasklet_finish, (unsigned long)host); + host->complete_wq = alloc_workqueue("sdhci", flags, 0); + if (!host->complete_wq) + return -ENOMEM; + + INIT_WORK(&host->complete_work, sdhci_complete_work); timer_setup(&host->timer, sdhci_timeout_timer, 0); timer_setup(&host->data_timer, sdhci_timeout_data_timer, 0); @@ -4234,7 +4274,7 @@ int __sdhci_add_host(struct sdhci_host *host) if (ret) { pr_err("%s: Failed to request IRQ %d: %d\n", mmc_hostname(mmc), host->irq, ret); - goto untasklet; + goto unwq; } ret = sdhci_led_register(host); @@ -4265,8 +4305,8 @@ unirq: sdhci_writel(host, 0, SDHCI_INT_ENABLE); sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); free_irq(host->irq, host); -untasklet: - tasklet_kill(&host->finish_tasklet); +unwq: + destroy_workqueue(host->complete_wq); return ret; } @@ -4328,7 +4368,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) del_timer_sync(&host->timer); del_timer_sync(&host->data_timer); - tasklet_kill(&host->finish_tasklet); + destroy_workqueue(host->complete_wq); if (!IS_ERR(mmc->supply.vqmmc)) regulator_disable(mmc->supply.vqmmc); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 01002cba1359..d6bcc584c92b 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -560,7 +560,8 @@ struct sdhci_host { unsigned int desc_sz; /* ADMA descriptor size */ - struct tasklet_struct finish_tasklet; /* Tasklet structures */ + struct workqueue_struct *complete_wq; /* Request completion wq */ + struct work_struct complete_work; /* Request completion work */ struct timer_list timer; /* Timer for timeouts */ struct timer_list data_timer; /* Timer for data timeouts */ @@ -596,6 +597,7 @@ struct sdhci_host { #define SDHCI_TUNING_MODE_3 2 /* Delay (ms) between tuning commands */ int tuning_delay; + int tuning_loop_count; /* Host SDMA buffer boundary. */ u32 sdma_boundary; diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index eea183e90f1b..a91c0b45c48d 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -158,6 +158,27 @@ static void sdhci_am654_set_power(struct sdhci_host *host, unsigned char mode, sdhci_set_power_noreg(host, mode, vdd); } +static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg) +{ + unsigned char timing = host->mmc->ios.timing; + + if (reg == SDHCI_HOST_CONTROL) { + switch (timing) { + /* + * According to the data manual, HISPD bit + * should not be set in these speed modes. + */ + case MMC_TIMING_SD_HS: + case MMC_TIMING_MMC_HS: + case MMC_TIMING_UHS_SDR12: + case MMC_TIMING_UHS_SDR25: + val &= ~SDHCI_CTRL_HISPD; + } + } + + writeb(val, host->ioaddr + reg); +} + static struct sdhci_ops sdhci_am654_ops = { .get_max_clock = sdhci_pltfm_clk_get_max_clock, .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, @@ -165,6 +186,7 @@ static struct sdhci_ops sdhci_am654_ops = { .set_bus_width = sdhci_set_bus_width, .set_power = sdhci_am654_set_power, .set_clock = sdhci_am654_set_clock, + .write_b = sdhci_am654_write_b, .reset = sdhci_reset, }; diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 2adb0d24360f..c5ba13fae399 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -4,8 +4,8 @@ * * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 * - * Copyright (C) 2015-17 Renesas Electronics Corporation - * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang + * Copyright (C) 2015-19 Renesas Electronics Corporation + * Copyright (C) 2016-19 Sang Engineering, Wolfram Sang * Copyright (C) 2016-17 Horms Solutions, Simon Horman * Copyright (C) 2007 Ian Molton * Copyright (C) 2004 Ian Molton @@ -105,6 +105,8 @@ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) #define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) +#define TMIO_MAX_BLK_SIZE 512 + struct tmio_mmc_data; struct tmio_mmc_host; diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 595949f1f001..130b91cb0f8a 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -4,8 +4,8 @@ * * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs * - * Copyright (C) 2015-17 Renesas Electronics Corporation - * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang + * Copyright (C) 2015-19 Renesas Electronics Corporation + * Copyright (C) 2016-19 Sang Engineering, Wolfram Sang * Copyright (C) 2017 Horms Solutions, Simon Horman * Copyright (C) 2011 Guennadi Liakhovetski * Copyright (C) 2007 Ian Molton @@ -1186,7 +1186,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->caps2 |= pdata->capabilities2; mmc->max_segs = pdata->max_segs ? : 32; - mmc->max_blk_size = 512; + mmc->max_blk_size = TMIO_MAX_BLK_SIZE; mmc->max_blk_count = pdata->max_blk_count ? : (PAGE_SIZE / mmc->max_blk_size) * mmc->max_segs; mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c index cd8b1b9d4d8a..b11ac2314328 100644 --- a/drivers/mmc/host/usdhi6rol0.c +++ b/drivers/mmc/host/usdhi6rol0.c @@ -1339,7 +1339,7 @@ static int usdhi6_stop_cmd(struct usdhi6_host *host) host->wait = USDHI6_WAIT_FOR_STOP; return 0; } - /* Unsupported STOP command */ + /* fall through - Unsupported STOP command. */ default: dev_err(mmc_dev(host->mmc), "unsupported stop CMD%d for CMD%d\n", @@ -1687,7 +1687,7 @@ static void usdhi6_timeout_work(struct work_struct *work) switch (host->wait) { default: dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait); - /* mrq can be NULL in this actually impossible case */ + /* fall through - mrq can be NULL, but is impossible. */ case USDHI6_WAIT_FOR_CMD: usdhi6_error_code(host); if (mrq) @@ -1709,10 +1709,7 @@ static void usdhi6_timeout_work(struct work_struct *work) host->offset, data->blocks, data->blksz, data->sg_len, sg_dma_len(sg), sg->offset); usdhi6_sg_unmap(host, true); - /* - * If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped - * the page - */ + /* fall through - page unmapped in USDHI6_WAIT_FOR_DATA_END. */ case USDHI6_WAIT_FOR_DATA_END: usdhi6_error_code(host); data->error = -ETIMEDOUT; |