diff options
Diffstat (limited to 'drivers')
63 files changed, 520 insertions, 221 deletions
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index b136c9c1e531..449c556274c0 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -943,6 +943,10 @@ static int acpi_bus_get_flags(struct acpi_device *device) if (ACPI_SUCCESS(status)) device->flags.lockable = 1; + /* Power resources cannot be power manageable. */ + if (device->device_type == ACPI_BUS_TYPE_POWER) + return 0; + /* Presence of _PS0|_PR0 indicates 'power manageable' */ status = acpi_get_handle(device->handle, "_PS0", &temp); if (ACPI_FAILURE(status)) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index fbc5b6e7c591..abe3ab709e87 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -63,6 +63,7 @@ void device_pm_init(struct device *dev) dev->power.wakeup = NULL; spin_lock_init(&dev->power.lock); pm_runtime_init(dev); + INIT_LIST_HEAD(&dev->power.entry); } /** diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 4573c83df6dd..abbbd33e8d8a 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -258,7 +258,7 @@ void device_set_wakeup_capable(struct device *dev, bool capable) if (!!dev->power.can_wakeup == !!capable) return; - if (device_is_registered(dev)) { + if (device_is_registered(dev) && !list_empty(&dev->power.entry)) { if (capable) { if (wakeup_sysfs_add(dev)) return; diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index 0fc0a79852de..6db161f64ae0 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -32,10 +32,9 @@ static DEFINE_MUTEX(clocks_mutex); * Then we take the most specific entry - with the following * order of precedence: dev+con > dev only > con only. */ -static struct clk *clk_find(const char *dev_id, const char *con_id) +static struct clk_lookup *clk_find(const char *dev_id, const char *con_id) { - struct clk_lookup *p; - struct clk *clk = NULL; + struct clk_lookup *p, *cl = NULL; int match, best = 0; list_for_each_entry(p, &clocks, node) { @@ -52,27 +51,27 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) } if (match > best) { - clk = p->clk; + cl = p; if (match != 3) best = match; else break; } } - return clk; + return cl; } struct clk *clk_get_sys(const char *dev_id, const char *con_id) { - struct clk *clk; + struct clk_lookup *cl; mutex_lock(&clocks_mutex); - clk = clk_find(dev_id, con_id); - if (clk && !__clk_get(clk)) - clk = NULL; + cl = clk_find(dev_id, con_id); + if (cl && !__clk_get(cl->clk)) + cl = NULL; mutex_unlock(&clocks_mutex); - return clk ? clk : ERR_PTR(-ENOENT); + return cl ? cl->clk : ERR_PTR(-ENOENT); } EXPORT_SYMBOL(clk_get_sys); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index c58f691ec3ce..b493663c7ba7 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -24,6 +24,7 @@ config DRM_KMS_HELPER depends on DRM select FB select FRAMEBUFFER_CONSOLE if !EXPERT + select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE help FB and CRTC helpers for KMS drivers. diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 950720473967..11d7a72c22d9 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -342,9 +342,22 @@ int drm_fb_helper_debug_leave(struct fb_info *info) } EXPORT_SYMBOL(drm_fb_helper_debug_leave); +bool drm_fb_helper_restore_fbdev_mode(struct drm_fb_helper *fb_helper) +{ + bool error = false; + int i, ret; + for (i = 0; i < fb_helper->crtc_count; i++) { + struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set; + ret = drm_crtc_helper_set_config(mode_set); + if (ret) + error = true; + } + return error; +} +EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode); + bool drm_fb_helper_force_kernel_mode(void) { - int i = 0; bool ret, error = false; struct drm_fb_helper *helper; @@ -352,12 +365,12 @@ bool drm_fb_helper_force_kernel_mode(void) return false; list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) { - for (i = 0; i < helper->crtc_count; i++) { - struct drm_mode_set *mode_set = &helper->crtc_info[i].mode_set; - ret = drm_crtc_helper_set_config(mode_set); - if (ret) - error = true; - } + if (helper->dev->switch_power_state == DRM_SWITCH_POWER_OFF) + continue; + + ret = drm_fb_helper_restore_fbdev_mode(helper); + if (ret) + error = true; } return error; } diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 72730377a01b..12876f2795d2 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -2207,7 +2207,7 @@ void i915_driver_lastclose(struct drm_device * dev) drm_i915_private_t *dev_priv = dev->dev_private; if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) { - drm_fb_helper_restore(); + intel_fb_restore_mode(dev); vga_switcheroo_process_delayed_switch(); return; } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index f5b0d8306d83..1d20712d527f 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -338,4 +338,5 @@ extern int intel_overlay_attrs(struct drm_device *dev, void *data, struct drm_file *file_priv); extern void intel_fb_output_poll_changed(struct drm_device *dev); +extern void intel_fb_restore_mode(struct drm_device *dev); #endif /* __INTEL_DRV_H__ */ diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 512782728e51..ec49bae73382 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -264,3 +264,13 @@ void intel_fb_output_poll_changed(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; drm_fb_helper_hotplug_event(&dev_priv->fbdev->helper); } + +void intel_fb_restore_mode(struct drm_device *dev) +{ + int ret; + drm_i915_private_t *dev_priv = dev->dev_private; + + ret = drm_fb_helper_restore_fbdev_mode(&dev_priv->fbdev->helper); + if (ret) + DRM_DEBUG("failed to restore crtc mode\n"); +} diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index bf7d4c061451..871df0376b1c 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -221,6 +221,19 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) return -EINVAL; } break; + case RADEON_INFO_NUM_TILE_PIPES: + if (rdev->family >= CHIP_CAYMAN) + value = rdev->config.cayman.max_tile_pipes; + else if (rdev->family >= CHIP_CEDAR) + value = rdev->config.evergreen.max_tile_pipes; + else if (rdev->family >= CHIP_RV770) + value = rdev->config.rv770.max_tile_pipes; + else if (rdev->family >= CHIP_R600) + value = rdev->config.r600.max_tile_pipes; + else { + return -EINVAL; + } + break; default: DRM_DEBUG_KMS("Invalid request %d\n", info->request); return -EINVAL; diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600 index af0da4ae3f55..92f1900dc7ca 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r600 +++ b/drivers/gpu/drm/radeon/reg_srcs/r600 @@ -708,6 +708,7 @@ r600 0x9400 0x00028D0C DB_RENDER_CONTROL 0x00028D10 DB_RENDER_OVERRIDE 0x0002880C DB_SHADER_CONTROL +0x00028D28 DB_SRESULTS_COMPARE_STATE0 0x00028D2C DB_SRESULTS_COMPARE_STATE1 0x00028430 DB_STENCILREFMASK 0x00028434 DB_STENCILREFMASK_BF diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 060ef6327876..50e40dbd8bb6 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -110,8 +110,7 @@ config SENSORS_ADM1021 help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, - and the XEON processor built-in sensor. + Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. This driver can also be built as a module. If so, the module will be called adm1021. @@ -618,10 +617,10 @@ config SENSORS_LM90 depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim - MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, - MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton - W83L771W/G/AWG/ASG sensor chips. + LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, + Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, + MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, + and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 250d099ca398..da72dc12068c 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1094,6 +1094,7 @@ static struct attribute *lm85_attributes_minctl[] = { &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr, + NULL }; static const struct attribute_group lm85_group_minctl = { @@ -1104,6 +1105,7 @@ static struct attribute *lm85_attributes_temp_off[] = { &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr, &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr, &sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr, + NULL }; static const struct attribute_group lm85_group_temp_off = { @@ -1329,11 +1331,11 @@ static int lm85_probe(struct i2c_client *client, if (data->type != emc6d103s) { err = sysfs_create_group(&client->dev.kobj, &lm85_group_minctl); if (err) - goto err_kfree; + goto err_remove_files; err = sysfs_create_group(&client->dev.kobj, &lm85_group_temp_off); if (err) - goto err_kfree; + goto err_remove_files; } /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index c43b4e9f96a9..2f94f9504804 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -49,10 +49,10 @@ * chips, but support three temperature sensors instead of two. MAX6695 * and MAX6696 only differ in the pinout so they can be treated identically. * - * This driver also supports the ADT7461 chip from Analog Devices. - * It's supported in both compatibility and extended mode. It is mostly - * compatible with LM90 except for a data format difference for the - * temperature value registers. + * This driver also supports ADT7461 and ADT7461A from Analog Devices as well as + * NCT1008 from ON Semiconductor. The chips are supported in both compatibility + * and extended mode. They are mostly compatible with LM90 except for a data + * format difference for the temperature value registers. * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -88,9 +88,10 @@ * Addresses to scan * Address is fully defined internally and cannot be changed except for * MAX6659, MAX6680 and MAX6681. - * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657, - * MAX6658 and W83L771 have address 0x4c. - * ADM1032-2, ADT7461-2, LM89-1, LM99-1 and MAX6646 have address 0x4d. + * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, ADT7461A, MAX6649, + * MAX6657, MAX6658, NCT1008 and W83L771 have address 0x4c. + * ADM1032-2, ADT7461-2, ADT7461A-2, LM89-1, LM99-1, MAX6646, and NCT1008D + * have address 0x4d. * MAX6647 has address 0x4e. * MAX6659 can have address 0x4c, 0x4d or 0x4e. * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, @@ -174,6 +175,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, static const struct i2c_device_id lm90_id[] = { { "adm1032", adm1032 }, { "adt7461", adt7461 }, + { "adt7461a", adt7461 }, { "lm90", lm90 }, { "lm86", lm86 }, { "lm89", lm86 }, @@ -188,6 +190,7 @@ static const struct i2c_device_id lm90_id[] = { { "max6681", max6680 }, { "max6695", max6696 }, { "max6696", max6696 }, + { "nct1008", adt7461 }, { "w83l771", w83l771 }, { } }; @@ -1153,6 +1156,11 @@ static int lm90_detect(struct i2c_client *new_client, && (reg_config1 & 0x1B) == 0x00 && reg_convrate <= 0x0A) { name = "adt7461"; + } else + if (chip_id == 0x57 /* ADT7461A, NCT1008 */ + && (reg_config1 & 0x1B) == 0x00 + && reg_convrate <= 0x0A) { + name = "adt7461a"; } } else if (man_id == 0x4D) { /* Maxim */ diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c index de5819199e2e..57240740b161 100644 --- a/drivers/hwmon/twl4030-madc-hwmon.c +++ b/drivers/hwmon/twl4030-madc-hwmon.c @@ -98,7 +98,6 @@ static const struct attribute_group twl4030_madc_group = { static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev) { int ret; - int status; struct device *hwmon; ret = sysfs_create_group(&pdev->dev.kobj, &twl4030_madc_group); @@ -107,7 +106,7 @@ static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev) hwmon = hwmon_device_register(&pdev->dev); if (IS_ERR(hwmon)) { dev_err(&pdev->dev, "hwmon_device_register failed.\n"); - status = PTR_ERR(hwmon); + ret = PTR_ERR(hwmon); goto err_reg; } diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 72c0415f6f94..455e909bc768 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -134,10 +134,15 @@ SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \ SMBHSTSTS_INTR) +/* Older devices have their ID defined in <linux/pci_ids.h> */ +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 +#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 +#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 struct i801_priv { struct i2c_adapter adapter; diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 0eb1515541e7..2dbba163b102 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------ * * i2c-parport.c I2C bus over parallel port * * ------------------------------------------------------------------------ * - Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2003-2011 Jean Delvare <khali@linux-fr.org> Based on older i2c-philips-par.c driver Copyright (C) 1995-2000 Simon G. Vogl @@ -33,6 +33,8 @@ #include <linux/i2c-algo-bit.h> #include <linux/i2c-smbus.h> #include <linux/slab.h> +#include <linux/list.h> +#include <linux/mutex.h> #include "i2c-parport.h" /* ----- Device list ------------------------------------------------------ */ @@ -43,10 +45,11 @@ struct i2c_par { struct i2c_algo_bit_data algo_data; struct i2c_smbus_alert_setup alert_data; struct i2c_client *ara; - struct i2c_par *next; + struct list_head node; }; -static struct i2c_par *adapter_list; +static LIST_HEAD(adapter_list); +static DEFINE_MUTEX(adapter_list_lock); /* ----- Low-level parallel port access ----------------------------------- */ @@ -228,8 +231,9 @@ static void i2c_parport_attach (struct parport *port) } /* Add the new adapter to the list */ - adapter->next = adapter_list; - adapter_list = adapter; + mutex_lock(&adapter_list_lock); + list_add_tail(&adapter->node, &adapter_list); + mutex_unlock(&adapter_list_lock); return; ERROR1: @@ -241,11 +245,11 @@ ERROR0: static void i2c_parport_detach (struct parport *port) { - struct i2c_par *adapter, *prev; + struct i2c_par *adapter, *_n; /* Walk the list */ - for (prev = NULL, adapter = adapter_list; adapter; - prev = adapter, adapter = adapter->next) { + mutex_lock(&adapter_list_lock); + list_for_each_entry_safe(adapter, _n, &adapter_list, node) { if (adapter->pdev->port == port) { if (adapter->ara) { parport_disable_irq(port); @@ -259,14 +263,11 @@ static void i2c_parport_detach (struct parport *port) parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); - if (prev) - prev->next = adapter->next; - else - adapter_list = adapter->next; + list_del(&adapter->node); kfree(adapter); - return; } } + mutex_unlock(&adapter_list_lock); } static struct parport_driver i2c_parport_driver = { diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c index 7de4b7ebffc5..d8ca0a0b970d 100644 --- a/drivers/infiniband/hw/qib/qib_iba6120.c +++ b/drivers/infiniband/hw/qib/qib_iba6120.c @@ -1799,7 +1799,7 @@ static int qib_6120_setup_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isn't' set. + * isn't set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT); dd->int_counter = 0; /* so we check interrupts work again */ diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c index 74fe0360bec7..c765a2eb04cf 100644 --- a/drivers/infiniband/hw/qib/qib_iba7220.c +++ b/drivers/infiniband/hw/qib/qib_iba7220.c @@ -2111,7 +2111,7 @@ static int qib_setup_7220_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isn't' set. + * isn't set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT); dd->int_counter = 0; /* so we check interrupts work again */ diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 55de3cf3441c..6bab3eaea70f 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -3299,7 +3299,7 @@ static int qib_do_7322_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isn't' set. + * isn't set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); dd->flags |= QIB_DOING_RESET; diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c index 5466d47db899..aae40e52af5b 100644 --- a/drivers/media/common/tuners/tda18271-common.c +++ b/drivers/media/common/tuners/tda18271-common.c @@ -533,16 +533,7 @@ int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) if (tda_fail(ret)) goto fail; - regs[R_MPD] = (0x77 & pd); - - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x08; - break; - case TDA18271_DIGITAL: - regs[R_MPD] |= 0x08; - break; - } + regs[R_MPD] = (0x7f & pd); div = ((d * (freq / 1000)) << 7) / 125; diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 9ad4454a148d..d884f5eee73c 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -579,8 +579,8 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) #define RF3 2 u32 rf_default[3]; u32 rf_freq[3]; - u8 prog_cal[3]; - u8 prog_tab[3]; + s32 prog_cal[3]; + s32 prog_tab[3]; i = tda18271_lookup_rf_band(fe, &freq, NULL); @@ -602,32 +602,33 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) return bcal; tda18271_calc_rf_cal(fe, &rf_freq[rf]); - prog_tab[rf] = regs[R_EB14]; + prog_tab[rf] = (s32)regs[R_EB14]; if (1 == bcal) - prog_cal[rf] = tda18271_calibrate_rf(fe, rf_freq[rf]); + prog_cal[rf] = + (s32)tda18271_calibrate_rf(fe, rf_freq[rf]); else prog_cal[rf] = prog_tab[rf]; switch (rf) { case RF1: map[i].rf_a1 = 0; - map[i].rf_b1 = (s32)(prog_cal[RF1] - prog_tab[RF1]); + map[i].rf_b1 = (prog_cal[RF1] - prog_tab[RF1]); map[i].rf1 = rf_freq[RF1] / 1000; break; case RF2: - dividend = (s32)(prog_cal[RF2] - prog_tab[RF2]) - - (s32)(prog_cal[RF1] + prog_tab[RF1]); + dividend = (prog_cal[RF2] - prog_tab[RF2] - + prog_cal[RF1] + prog_tab[RF1]); divisor = (s32)(rf_freq[RF2] - rf_freq[RF1]) / 1000; map[i].rf_a1 = (dividend / divisor); map[i].rf2 = rf_freq[RF2] / 1000; break; case RF3: - dividend = (s32)(prog_cal[RF3] - prog_tab[RF3]) - - (s32)(prog_cal[RF2] + prog_tab[RF2]); + dividend = (prog_cal[RF3] - prog_tab[RF3] - + prog_cal[RF2] + prog_tab[RF2]); divisor = (s32)(rf_freq[RF3] - rf_freq[RF2]) / 1000; map[i].rf_a2 = (dividend / divisor); - map[i].rf_b2 = (s32)(prog_cal[RF2] - prog_tab[RF2]); + map[i].rf_b2 = (prog_cal[RF2] - prog_tab[RF2]); map[i].rf3 = rf_freq[RF3] / 1000; break; default: diff --git a/drivers/media/common/tuners/tda18271-maps.c b/drivers/media/common/tuners/tda18271-maps.c index e7f84c705da8..3d5b6ab7e332 100644 --- a/drivers/media/common/tuners/tda18271-maps.c +++ b/drivers/media/common/tuners/tda18271-maps.c @@ -229,8 +229,7 @@ static struct tda18271_map tda18271c2_km[] = { static struct tda18271_map tda18271_rf_band[] = { { .rfmax = 47900, .val = 0x00 }, { .rfmax = 61100, .val = 0x01 }, -/* { .rfmax = 152600, .val = 0x02 }, */ - { .rfmax = 121200, .val = 0x02 }, + { .rfmax = 152600, .val = 0x02 }, { .rfmax = 164700, .val = 0x03 }, { .rfmax = 203500, .val = 0x04 }, { .rfmax = 457800, .val = 0x05 }, @@ -448,7 +447,7 @@ static struct tda18271_map tda18271c2_rf_cal[] = { { .rfmax = 150000, .val = 0xb0 }, { .rfmax = 151000, .val = 0xb1 }, { .rfmax = 152000, .val = 0xb7 }, - { .rfmax = 153000, .val = 0xbd }, + { .rfmax = 152600, .val = 0xbd }, { .rfmax = 154000, .val = 0x20 }, { .rfmax = 155000, .val = 0x22 }, { .rfmax = 156000, .val = 0x24 }, @@ -459,7 +458,7 @@ static struct tda18271_map tda18271c2_rf_cal[] = { { .rfmax = 161000, .val = 0x2d }, { .rfmax = 163000, .val = 0x2e }, { .rfmax = 164000, .val = 0x2f }, - { .rfmax = 165000, .val = 0x30 }, + { .rfmax = 164700, .val = 0x30 }, { .rfmax = 166000, .val = 0x11 }, { .rfmax = 167000, .val = 0x12 }, { .rfmax = 168000, .val = 0x13 }, @@ -510,7 +509,8 @@ static struct tda18271_map tda18271c2_rf_cal[] = { { .rfmax = 236000, .val = 0x1b }, { .rfmax = 237000, .val = 0x1c }, { .rfmax = 240000, .val = 0x1d }, - { .rfmax = 242000, .val = 0x1f }, + { .rfmax = 242000, .val = 0x1e }, + { .rfmax = 244000, .val = 0x1f }, { .rfmax = 247000, .val = 0x20 }, { .rfmax = 249000, .val = 0x21 }, { .rfmax = 252000, .val = 0x22 }, @@ -624,7 +624,7 @@ static struct tda18271_map tda18271c2_rf_cal[] = { { .rfmax = 453000, .val = 0x93 }, { .rfmax = 454000, .val = 0x94 }, { .rfmax = 456000, .val = 0x96 }, - { .rfmax = 457000, .val = 0x98 }, + { .rfmax = 457800, .val = 0x98 }, { .rfmax = 461000, .val = 0x11 }, { .rfmax = 468000, .val = 0x12 }, { .rfmax = 472000, .val = 0x13 }, diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index 955254090a0e..03f96d6ca894 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -38,7 +38,7 @@ MODULE_PARM_DESC(debug, DEBSTATUS); #define DRIVER_VERSION "0.1" -#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver" +#define DRIVER_NAME "flexcop-pci" #define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>" struct flexcop_pci { diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index fe4f894183ff..ccbd39a38c46 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -362,7 +362,7 @@ config DVB_USB_LME2510 config DVB_USB_TECHNISAT_USB2 tristate "Technisat DVB-S/S2 USB2.0 support" depends on DVB_USB - select DVB_STB0899 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE + select DVB_STV090x if !DVB_FE_CUSTOMISE + select DVB_STV6110x if !DVB_FE_CUSTOMISE help Say Y here to support the Technisat USB2 DVB-S/S2 device diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 97af266d7f1d..65214af5cd74 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -2162,7 +2162,7 @@ struct dibx000_agc_config dib7090_agc_config[2] = { .agc1_pt3 = 98, .agc1_slope1 = 0, .agc1_slope2 = 167, - .agc1_pt1 = 98, + .agc2_pt1 = 98, .agc2_pt2 = 255, .agc2_slope1 = 104, .agc2_slope2 = 0, @@ -2440,11 +2440,11 @@ static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap) dib0700_set_i2c_speed(adap->dev, 340); adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]); - dib7090_slave_reset(adap->fe); - if (adap->fe == NULL) return -ENODEV; + dib7090_slave_reset(adap->fe); + return 0; } diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c index 23640ed44d85..056138f63c7d 100644 --- a/drivers/media/media-entity.c +++ b/drivers/media/media-entity.c @@ -378,7 +378,6 @@ EXPORT_SYMBOL_GPL(media_entity_create_link); static int __media_entity_setup_link_notify(struct media_link *link, u32 flags) { - const u32 mask = MEDIA_LNK_FL_ENABLED; int ret; /* Notify both entities. */ @@ -395,7 +394,7 @@ static int __media_entity_setup_link_notify(struct media_link *link, u32 flags) return ret; } - link->flags = (link->flags & ~mask) | (flags & mask); + link->flags = flags; link->reverse->flags = link->flags; return 0; @@ -417,6 +416,7 @@ static int __media_entity_setup_link_notify(struct media_link *link, u32 flags) */ int __media_entity_setup_link(struct media_link *link, u32 flags) { + const u32 mask = MEDIA_LNK_FL_ENABLED; struct media_device *mdev; struct media_entity *source, *sink; int ret = -EBUSY; @@ -424,6 +424,10 @@ int __media_entity_setup_link(struct media_link *link, u32 flags) if (link == NULL) return -EINVAL; + /* The non-modifiable link flags must not be modified. */ + if ((link->flags & ~mask) != (flags & ~mask)) + return -EINVAL; + if (link->flags & MEDIA_LNK_FL_IMMUTABLE) return link->flags == flags ? 0 : -EINVAL; diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index dc3f04c52d5e..87bad7678d92 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -170,7 +170,7 @@ static int fmr2_setfreq(struct fmr2 *dev) return 0; } -/* !!! not tested, in my card this does't work !!! */ +/* !!! not tested, in my card this doesn't work !!! */ static int fmr2_setvolume(struct fmr2 *dev) { int vol[16] = { 0x021, 0x084, 0x090, 0x104, diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 4498b944dec8..00f51dd121f3 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -875,7 +875,7 @@ config MX3_VIDEO config VIDEO_MX3 tristate "i.MX3x Camera Sensor Interface driver" depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA - select VIDEOBUF_DMA_CONTIG + select VIDEOBUF2_DMA_CONTIG select MX3_VIDEO ---help--- This is a v4l2 driver for the i.MX3x Camera Sensor Interface diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index c6e2ca3b1149..6fbc356113c1 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -350,9 +350,17 @@ void cx18_streams_cleanup(struct cx18 *cx, int unregister) /* No struct video_device, but can have buffers allocated */ if (type == CX18_ENC_STREAM_TYPE_IDX) { + /* If the module params didn't inhibit IDX ... */ if (cx->stream_buffers[type] != 0) { cx->stream_buffers[type] = 0; - cx18_stream_free(&cx->streams[type]); + /* + * Before calling cx18_stream_free(), + * check if the IDX stream was actually set up. + * Needed, since the cx18_probe() error path + * exits through here as well as normal clean up + */ + if (cx->streams[type].buffers != 0) + cx18_stream_free(&cx->streams[type]); } continue; } diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 3b6e7f28568e..caab1bfb79e2 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -22,6 +22,7 @@ config VIDEO_CX23885 select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_STV0900 if !DVB_FE_CUSTOMISE select DVB_DS3000 if !DVB_FE_CUSTOMISE + select DVB_STV0367 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c index 1a1169115716..0382ea752e6f 100644 --- a/drivers/media/video/imx074.c +++ b/drivers/media/video/imx074.c @@ -298,7 +298,7 @@ static unsigned long imx074_query_bus_param(struct soc_camera_device *icd) static int imx074_set_bus_param(struct soc_camera_device *icd, unsigned long flags) { - return -1; + return -EINVAL; } static struct soc_camera_ops imx074_ops = { diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c index 503bd7922bd6..472a69359e60 100644 --- a/drivers/media/video/omap3isp/isp.c +++ b/drivers/media/video/omap3isp/isp.c @@ -215,20 +215,21 @@ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel) } switch (xclksel) { - case 0: + case ISP_XCLK_A: isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, ISPTCTRL_CTRL_DIVA_MASK, divisor << ISPTCTRL_CTRL_DIVA_SHIFT); dev_dbg(isp->dev, "isp_set_xclk(): cam_xclka set to %d Hz\n", currentxclk); break; - case 1: + case ISP_XCLK_B: isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, ISPTCTRL_CTRL_DIVB_MASK, divisor << ISPTCTRL_CTRL_DIVB_SHIFT); dev_dbg(isp->dev, "isp_set_xclk(): cam_xclkb set to %d Hz\n", currentxclk); break; + case ISP_XCLK_NONE: default: omap3isp_put(isp); dev_dbg(isp->dev, "ISP_ERR: isp_set_xclk(): Invalid requested " @@ -237,13 +238,13 @@ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel) } /* Do we go from stable whatever to clock? */ - if (divisor >= 2 && isp->xclk_divisor[xclksel] < 2) + if (divisor >= 2 && isp->xclk_divisor[xclksel - 1] < 2) omap3isp_get(isp); /* Stopping the clock. */ - else if (divisor < 2 && isp->xclk_divisor[xclksel] >= 2) + else if (divisor < 2 && isp->xclk_divisor[xclksel - 1] >= 2) omap3isp_put(isp); - isp->xclk_divisor[xclksel] = divisor; + isp->xclk_divisor[xclksel - 1] = divisor; omap3isp_put(isp); @@ -285,7 +286,8 @@ static void isp_power_settings(struct isp_device *isp, int idle) */ void omap3isp_configure_bridge(struct isp_device *isp, enum ccdc_input_entity input, - const struct isp_parallel_platform_data *pdata) + const struct isp_parallel_platform_data *pdata, + unsigned int shift) { u32 ispctrl_val; @@ -298,9 +300,9 @@ void omap3isp_configure_bridge(struct isp_device *isp, switch (input) { case CCDC_INPUT_PARALLEL: ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL; - ispctrl_val |= pdata->data_lane_shift << ISPCTRL_SHIFT_SHIFT; ispctrl_val |= pdata->clk_pol << ISPCTRL_PAR_CLK_POL_SHIFT; ispctrl_val |= pdata->bridge << ISPCTRL_PAR_BRIDGE_SHIFT; + shift += pdata->data_lane_shift * 2; break; case CCDC_INPUT_CSI2A: @@ -319,6 +321,8 @@ void omap3isp_configure_bridge(struct isp_device *isp, return; } + ispctrl_val |= ((shift/2) << ISPCTRL_SHIFT_SHIFT) & ISPCTRL_SHIFT_MASK; + ispctrl_val &= ~ISPCTRL_SYNC_DETECT_MASK; ispctrl_val |= ISPCTRL_SYNC_DETECT_VSRISE; @@ -658,6 +662,8 @@ int omap3isp_pipeline_pm_use(struct media_entity *entity, int use) /* Apply power change to connected non-nodes. */ ret = isp_pipeline_pm_power(entity, change); + if (ret < 0) + entity->use_count -= change; mutex_unlock(&entity->parent->graph_mutex); @@ -872,6 +878,9 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe) } } + if (failure < 0) + isp->needs_reset = true; + return failure; } @@ -884,7 +893,8 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe) * single-shot or continuous mode. * * Return 0 if successful, or the return value of the failed video::s_stream - * operation otherwise. + * operation otherwise. The pipeline state is not updated when the operation + * fails, except when stopping the pipeline. */ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, enum isp_pipeline_stream_state state) @@ -895,7 +905,9 @@ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, ret = isp_pipeline_disable(pipe); else ret = isp_pipeline_enable(pipe, state); - pipe->stream_state = state; + + if (ret == 0 || state == ISP_PIPELINE_STREAM_STOPPED) + pipe->stream_state = state; return ret; } @@ -1481,6 +1493,10 @@ void omap3isp_put(struct isp_device *isp) if (--isp->ref_count == 0) { isp_disable_interrupts(isp); isp_save_ctx(isp); + if (isp->needs_reset) { + isp_reset(isp); + isp->needs_reset = false; + } isp_disable_clocks(isp); } mutex_unlock(&isp->isp_mutex); diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h index cf5214e95a92..2620c405f5e4 100644 --- a/drivers/media/video/omap3isp/isp.h +++ b/drivers/media/video/omap3isp/isp.h @@ -132,7 +132,6 @@ struct isp_reg { /** * struct isp_parallel_platform_data - Parallel interface platform data - * @width: Parallel bus width in bits (8, 10, 11 or 12) * @data_lane_shift: Data lane shifter * 0 - CAMEXT[13:0] -> CAM[13:0] * 1 - CAMEXT[13:2] -> CAM[11:0] @@ -146,7 +145,6 @@ struct isp_reg { * ISPCTRL_PAR_BRIDGE_BENDIAN - Big endian */ struct isp_parallel_platform_data { - unsigned int width; unsigned int data_lane_shift:2; unsigned int clk_pol:1; unsigned int bridge:4; @@ -262,6 +260,7 @@ struct isp_device { /* ISP Obj */ spinlock_t stat_lock; /* common lock for statistic drivers */ struct mutex isp_mutex; /* For handling ref_count field */ + bool needs_reset; int has_context; int ref_count; unsigned int autoidle; @@ -311,11 +310,12 @@ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, enum isp_pipeline_stream_state state); void omap3isp_configure_bridge(struct isp_device *isp, enum ccdc_input_entity input, - const struct isp_parallel_platform_data *pdata); + const struct isp_parallel_platform_data *pdata, + unsigned int shift); -#define ISP_XCLK_NONE -1 -#define ISP_XCLK_A 0 -#define ISP_XCLK_B 1 +#define ISP_XCLK_NONE 0 +#define ISP_XCLK_A 1 +#define ISP_XCLK_B 2 struct isp_device *omap3isp_get(struct isp_device *isp); void omap3isp_put(struct isp_device *isp); diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c index 5ff9d14ce710..39d501bda636 100644 --- a/drivers/media/video/omap3isp/ispccdc.c +++ b/drivers/media/video/omap3isp/ispccdc.c @@ -43,6 +43,12 @@ __ccdc_get_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, static const unsigned int ccdc_fmts[] = { V4L2_MBUS_FMT_Y8_1X8, + V4L2_MBUS_FMT_Y10_1X10, + V4L2_MBUS_FMT_Y12_1X12, + V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10, @@ -1110,21 +1116,38 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) struct isp_parallel_platform_data *pdata = NULL; struct v4l2_subdev *sensor; struct v4l2_mbus_framefmt *format; + const struct isp_format_info *fmt_info; + struct v4l2_subdev_format fmt_src; + unsigned int depth_out; + unsigned int depth_in = 0; struct media_pad *pad; unsigned long flags; + unsigned int shift; u32 syn_mode; u32 ccdc_pattern; - if (ccdc->input == CCDC_INPUT_PARALLEL) { - pad = media_entity_remote_source(&ccdc->pads[CCDC_PAD_SINK]); - sensor = media_entity_to_v4l2_subdev(pad->entity); + pad = media_entity_remote_source(&ccdc->pads[CCDC_PAD_SINK]); + sensor = media_entity_to_v4l2_subdev(pad->entity); + if (ccdc->input == CCDC_INPUT_PARALLEL) pdata = &((struct isp_v4l2_subdevs_group *)sensor->host_priv) ->bus.parallel; + + /* Compute shift value for lane shifter to configure the bridge. */ + fmt_src.pad = pad->index; + fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE; + if (!v4l2_subdev_call(sensor, pad, get_fmt, NULL, &fmt_src)) { + fmt_info = omap3isp_video_format_info(fmt_src.format.code); + depth_in = fmt_info->bpp; } - omap3isp_configure_bridge(isp, ccdc->input, pdata); + fmt_info = omap3isp_video_format_info + (isp->isp_ccdc.formats[CCDC_PAD_SINK].code); + depth_out = fmt_info->bpp; + + shift = depth_in - depth_out; + omap3isp_configure_bridge(isp, ccdc->input, pdata, shift); - ccdc->syncif.datsz = pdata ? pdata->width : 10; + ccdc->syncif.datsz = depth_out; ccdc_config_sync_if(ccdc, &ccdc->syncif); /* CCDC_PAD_SINK */ @@ -1338,7 +1361,7 @@ static int ccdc_sbl_wait_idle(struct isp_ccdc_device *ccdc, * @ccdc: Pointer to ISP CCDC device. * @event: Pointing which event trigger handler * - * Return 1 when the event and stopping request combination is satisfyied, + * Return 1 when the event and stopping request combination is satisfied, * zero otherwise. */ static int __ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event) @@ -1618,7 +1641,7 @@ static int ccdc_video_queue(struct isp_video *video, struct isp_buffer *buffer) ccdc_set_outaddr(ccdc, buffer->isp_addr); - /* We now have a buffer queued on the output, restart the pipeline in + /* We now have a buffer queued on the output, restart the pipeline * on the next CCDC interrupt if running in continuous mode (or when * starting the stream). */ diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c index 2b16988a501d..aba537af87e4 100644 --- a/drivers/media/video/omap3isp/isppreview.c +++ b/drivers/media/video/omap3isp/isppreview.c @@ -755,7 +755,7 @@ static struct preview_update update_attrs[] = { * @configs - pointer to update config structure. * @config - return pointer to appropriate structure field. * @bit - for which feature to return pointers. - * Return size of coresponding prev_params member + * Return size of corresponding prev_params member */ static u32 __preview_get_ptrs(struct prev_params *params, void **param, diff --git a/drivers/media/video/omap3isp/ispqueue.c b/drivers/media/video/omap3isp/ispqueue.c index 8fddc5806b0d..9c317148205f 100644 --- a/drivers/media/video/omap3isp/ispqueue.c +++ b/drivers/media/video/omap3isp/ispqueue.c @@ -339,7 +339,7 @@ static int isp_video_buffer_prepare_user(struct isp_video_buffer *buf) up_read(¤t->mm->mmap_sem); if (ret != buf->npages) { - buf->npages = ret; + buf->npages = ret < 0 ? 0 : ret; isp_video_buffer_cleanup(buf); return -EFAULT; } @@ -408,8 +408,8 @@ done: * isp_video_buffer_prepare_vm_flags - Get VMA flags for a userspace address * * This function locates the VMAs for the buffer's userspace address and checks - * that their flags match. The onlflag that we need to care for at the moment is - * VM_PFNMAP. + * that their flags match. The only flag that we need to care for at the moment + * is VM_PFNMAP. * * The buffer vm_flags field is set to the first VMA flags. * diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c index 653f88ba56db..0bb0f8cd36f5 100644 --- a/drivers/media/video/omap3isp/ispresizer.c +++ b/drivers/media/video/omap3isp/ispresizer.c @@ -714,19 +714,50 @@ static void resizer_print_status(struct isp_res_device *res) * iw and ih are the input width and height after cropping. Those equations need * to be satisfied exactly for the resizer to work correctly. * - * Reverting the equations, we can compute the resizing ratios with + * The equations can't be easily reverted, as the >> 8 operation is not linear. + * In addition, not all input sizes can be achieved for a given output size. To + * get the highest input size lower than or equal to the requested input size, + * we need to compute the highest resizing ratio that satisfies the following + * inequality (taking the 4-tap mode width equation as an example) + * + * iw >= (32 * sph + (ow - 1) * hrsz + 16) >> 8 - 7 + * + * (where iw is the requested input width) which can be rewritten as + * + * iw - 7 >= (32 * sph + (ow - 1) * hrsz + 16) >> 8 + * (iw - 7) << 8 >= 32 * sph + (ow - 1) * hrsz + 16 - b + * ((iw - 7) << 8) + b >= 32 * sph + (ow - 1) * hrsz + 16 + * + * where b is the value of the 8 least significant bits of the right hand side + * expression of the last inequality. The highest resizing ratio value will be + * achieved when b is equal to its maximum value of 255. That resizing ratio + * value will still satisfy the original inequality, as b will disappear when + * the expression will be shifted right by 8. + * + * The reverted the equations thus become * * - 8-phase, 4-tap mode - * hrsz = ((iw - 7) * 256 - 16 - 32 * sph) / (ow - 1) - * vrsz = ((ih - 4) * 256 - 16 - 32 * spv) / (oh - 1) + * hrsz = ((iw - 7) * 256 + 255 - 16 - 32 * sph) / (ow - 1) + * vrsz = ((ih - 4) * 256 + 255 - 16 - 32 * spv) / (oh - 1) * - 4-phase, 7-tap mode - * hrsz = ((iw - 7) * 256 - 32 - 64 * sph) / (ow - 1) - * vrsz = ((ih - 7) * 256 - 32 - 64 * spv) / (oh - 1) + * hrsz = ((iw - 7) * 256 + 255 - 32 - 64 * sph) / (ow - 1) + * vrsz = ((ih - 7) * 256 + 255 - 32 - 64 * spv) / (oh - 1) * - * The ratios are integer values, and must be rounded down to ensure that the - * cropped input size is not bigger than the uncropped input size. As the ratio - * in 7-tap mode is always smaller than the ratio in 4-tap mode, we can use the - * 7-tap mode equations to compute a ratio approximation. + * The ratios are integer values, and are rounded down to ensure that the + * cropped input size is not bigger than the uncropped input size. + * + * As the number of phases/taps, used to select the correct equations to compute + * the ratio, depends on the ratio, we start with the 4-tap mode equations to + * compute an approximation of the ratio, and switch to the 7-tap mode equations + * if the approximation is higher than the ratio threshold. + * + * As the 7-tap mode equations will return a ratio smaller than or equal to the + * 4-tap mode equations, the resulting ratio could become lower than or equal to + * the ratio threshold. This 'equations loop' isn't an issue as long as the + * correct equations are used to compute the final input size. Starting with the + * 4-tap mode equations ensure that, in case of values resulting in a 'ratio + * loop', the smallest of the ratio values will be used, never exceeding the + * requested input size. * * We first clamp the output size according to the hardware capabilitie to avoid * auto-cropping the input more than required to satisfy the TRM equations. The @@ -775,6 +806,8 @@ static void resizer_calc_ratios(struct isp_res_device *res, unsigned int max_width; unsigned int max_height; unsigned int width_alignment; + unsigned int width; + unsigned int height; /* * Clamp the output height based on the hardware capabilities and @@ -786,19 +819,22 @@ static void resizer_calc_ratios(struct isp_res_device *res, max_height = min_t(unsigned int, max_height, MAX_OUT_HEIGHT); output->height = clamp(output->height, min_height, max_height); - ratio->vert = ((input->height - 7) * 256 - 32 - 64 * spv) + ratio->vert = ((input->height - 4) * 256 + 255 - 16 - 32 * spv) / (output->height - 1); + if (ratio->vert > MID_RESIZE_VALUE) + ratio->vert = ((input->height - 7) * 256 + 255 - 32 - 64 * spv) + / (output->height - 1); ratio->vert = clamp_t(unsigned int, ratio->vert, MIN_RESIZE_VALUE, MAX_RESIZE_VALUE); if (ratio->vert <= MID_RESIZE_VALUE) { upscaled_height = (output->height - 1) * ratio->vert + 32 * spv + 16; - input->height = (upscaled_height >> 8) + 4; + height = (upscaled_height >> 8) + 4; } else { upscaled_height = (output->height - 1) * ratio->vert + 64 * spv + 32; - input->height = (upscaled_height >> 8) + 7; + height = (upscaled_height >> 8) + 7; } /* @@ -854,20 +890,29 @@ static void resizer_calc_ratios(struct isp_res_device *res, max_width & ~(width_alignment - 1)); output->width = ALIGN(output->width, width_alignment); - ratio->horz = ((input->width - 7) * 256 - 32 - 64 * sph) + ratio->horz = ((input->width - 7) * 256 + 255 - 16 - 32 * sph) / (output->width - 1); + if (ratio->horz > MID_RESIZE_VALUE) + ratio->horz = ((input->width - 7) * 256 + 255 - 32 - 64 * sph) + / (output->width - 1); ratio->horz = clamp_t(unsigned int, ratio->horz, MIN_RESIZE_VALUE, MAX_RESIZE_VALUE); if (ratio->horz <= MID_RESIZE_VALUE) { upscaled_width = (output->width - 1) * ratio->horz + 32 * sph + 16; - input->width = (upscaled_width >> 8) + 7; + width = (upscaled_width >> 8) + 7; } else { upscaled_width = (output->width - 1) * ratio->horz + 64 * sph + 32; - input->width = (upscaled_width >> 8) + 7; + width = (upscaled_width >> 8) + 7; } + + /* Center the new crop rectangle. */ + input->left += (input->width - width) / 2; + input->top += (input->height - height) / 2; + input->width = width; + input->height = height; } /* diff --git a/drivers/media/video/omap3isp/ispstat.h b/drivers/media/video/omap3isp/ispstat.h index 820950c9ef46..d86da94fa50d 100644 --- a/drivers/media/video/omap3isp/ispstat.h +++ b/drivers/media/video/omap3isp/ispstat.h @@ -131,9 +131,9 @@ struct ispstat { struct ispstat_generic_config { /* * Fields must be in the same order as in: - * - isph3a_aewb_config - * - isph3a_af_config - * - isphist_config + * - omap3isp_h3a_aewb_config + * - omap3isp_h3a_af_config + * - omap3isp_hist_config */ u32 buf_size; u16 config_counter; diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c index 208a7ec739d7..9cd8f1aa567b 100644 --- a/drivers/media/video/omap3isp/ispvideo.c +++ b/drivers/media/video/omap3isp/ispvideo.c @@ -47,29 +47,59 @@ static struct isp_format_info formats[] = { { V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, - V4L2_MBUS_FMT_Y8_1X8, V4L2_PIX_FMT_GREY, 8, }, + V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, + V4L2_PIX_FMT_GREY, 8, }, + { V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y10_1X10, + V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y8_1X8, + V4L2_PIX_FMT_Y10, 10, }, + { V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y10_1X10, + V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y8_1X8, + V4L2_PIX_FMT_Y12, 12, }, + { V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_PIX_FMT_SBGGR8, 8, }, + { V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_PIX_FMT_SGBRG8, 8, }, + { V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_PIX_FMT_SGRBG8, 8, }, + { V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_PIX_FMT_SRGGB8, 8, }, { V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, - V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10DPCM8, 8, }, + V4L2_MBUS_FMT_SGRBG10_1X10, 0, + V4L2_PIX_FMT_SGRBG10DPCM8, 8, }, { V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10, - V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10, 10, }, + V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_PIX_FMT_SBGGR10, 10, }, { V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_1X10, - V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10, 10, }, + V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_PIX_FMT_SGBRG10, 10, }, { V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG10_1X10, - V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10, 10, }, + V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_PIX_FMT_SGRBG10, 10, }, { V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10, - V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10, 10, }, + V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_PIX_FMT_SRGGB10, 10, }, { V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR10_1X10, - V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12, 12, }, + V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_PIX_FMT_SBGGR12, 12, }, { V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG10_1X10, - V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12, 12, }, + V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_PIX_FMT_SGBRG12, 12, }, { V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG10_1X10, - V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12, 12, }, + V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_PIX_FMT_SGRBG12, 12, }, { V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB10_1X10, - V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12, 12, }, + V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_PIX_FMT_SRGGB12, 12, }, { V4L2_MBUS_FMT_UYVY8_1X16, V4L2_MBUS_FMT_UYVY8_1X16, - V4L2_MBUS_FMT_UYVY8_1X16, V4L2_PIX_FMT_UYVY, 16, }, + V4L2_MBUS_FMT_UYVY8_1X16, 0, + V4L2_PIX_FMT_UYVY, 16, }, { V4L2_MBUS_FMT_YUYV8_1X16, V4L2_MBUS_FMT_YUYV8_1X16, - V4L2_MBUS_FMT_YUYV8_1X16, V4L2_PIX_FMT_YUYV, 16, }, + V4L2_MBUS_FMT_YUYV8_1X16, 0, + V4L2_PIX_FMT_YUYV, 16, }, }; const struct isp_format_info * @@ -86,6 +116,37 @@ omap3isp_video_format_info(enum v4l2_mbus_pixelcode code) } /* + * Decide whether desired output pixel code can be obtained with + * the lane shifter by shifting the input pixel code. + * @in: input pixelcode to shifter + * @out: output pixelcode from shifter + * @additional_shift: # of bits the sensor's LSB is offset from CAMEXT[0] + * + * return true if the combination is possible + * return false otherwise + */ +static bool isp_video_is_shiftable(enum v4l2_mbus_pixelcode in, + enum v4l2_mbus_pixelcode out, + unsigned int additional_shift) +{ + const struct isp_format_info *in_info, *out_info; + + if (in == out) + return true; + + in_info = omap3isp_video_format_info(in); + out_info = omap3isp_video_format_info(out); + + if ((in_info->flavor == 0) || (out_info->flavor == 0)) + return false; + + if (in_info->flavor != out_info->flavor) + return false; + + return in_info->bpp - out_info->bpp + additional_shift <= 6; +} + +/* * isp_video_mbus_to_pix - Convert v4l2_mbus_framefmt to v4l2_pix_format * @video: ISP video instance * @mbus: v4l2_mbus_framefmt format (input) @@ -235,6 +296,7 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe) return -EPIPE; while (1) { + unsigned int shifter_link; /* Retrieve the sink format */ pad = &subdev->entity.pads[0]; if (!(pad->flags & MEDIA_PAD_FL_SINK)) @@ -263,6 +325,10 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe) return -ENOSPC; } + /* If sink pad is on CCDC, the link has the lane shifter + * in the middle of it. */ + shifter_link = subdev == &isp->isp_ccdc.subdev; + /* Retrieve the source format */ pad = media_entity_remote_source(pad); if (pad == NULL || @@ -278,10 +344,24 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe) return -EPIPE; /* Check if the two ends match */ - if (fmt_source.format.code != fmt_sink.format.code || - fmt_source.format.width != fmt_sink.format.width || + if (fmt_source.format.width != fmt_sink.format.width || fmt_source.format.height != fmt_sink.format.height) return -EPIPE; + + if (shifter_link) { + unsigned int parallel_shift = 0; + if (isp->isp_ccdc.input == CCDC_INPUT_PARALLEL) { + struct isp_parallel_platform_data *pdata = + &((struct isp_v4l2_subdevs_group *) + subdev->host_priv)->bus.parallel; + parallel_shift = pdata->data_lane_shift * 2; + } + if (!isp_video_is_shiftable(fmt_source.format.code, + fmt_sink.format.code, + parallel_shift)) + return -EPIPE; + } else if (fmt_source.format.code != fmt_sink.format.code) + return -EPIPE; } return 0; diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h index 524a1acd0906..911bea64e78a 100644 --- a/drivers/media/video/omap3isp/ispvideo.h +++ b/drivers/media/video/omap3isp/ispvideo.h @@ -49,6 +49,8 @@ struct v4l2_pix_format; * bits. Identical to @code if the format is 10 bits wide or less. * @uncompressed: V4L2 media bus format code for the corresponding uncompressed * format. Identical to @code if the format is not DPCM compressed. + * @flavor: V4L2 media bus format code for the same pixel layout but + * shifted to be 8 bits per pixel. =0 if format is not shiftable. * @pixelformat: V4L2 pixel format FCC identifier * @bpp: Bits per pixel */ @@ -56,6 +58,7 @@ struct isp_format_info { enum v4l2_mbus_pixelcode code; enum v4l2_mbus_pixelcode truncated; enum v4l2_mbus_pixelcode uncompressed; + enum v4l2_mbus_pixelcode flavor; u32 pixelformat; unsigned int bpp; }; diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 95f8b4e11e46..d142b40ea64e 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -527,7 +527,7 @@ static int fimc_cap_s_fmt_mplane(struct file *file, void *priv, if (ret) return ret; - if (vb2_is_streaming(&fimc->vid_cap.vbq) || fimc_capture_active(fimc)) + if (vb2_is_busy(&fimc->vid_cap.vbq) || fimc_capture_active(fimc)) return -EBUSY; frame = &ctx->d_frame; @@ -539,8 +539,10 @@ static int fimc_cap_s_fmt_mplane(struct file *file, void *priv, return -EINVAL; } - for (i = 0; i < frame->fmt->colplanes; i++) - frame->payload[i] = pix->plane_fmt[i].bytesperline * pix->height; + for (i = 0; i < frame->fmt->colplanes; i++) { + frame->payload[i] = + (pix->width * pix->height * frame->fmt->depth[i]) >> 3; + } /* Output DMA frame pixel size and offsets. */ frame->f_width = pix->plane_fmt[0].bytesperline * 8 diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 6c919b38a3d8..dc91a8511af6 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -361,10 +361,20 @@ static void fimc_capture_irq_handler(struct fimc_dev *fimc) { struct fimc_vid_cap *cap = &fimc->vid_cap; struct fimc_vid_buffer *v_buf; + struct timeval *tv; + struct timespec ts; if (!list_empty(&cap->active_buf_q) && test_bit(ST_CAPT_RUN, &fimc->state)) { + ktime_get_real_ts(&ts); + v_buf = active_queue_pop(cap); + + tv = &v_buf->vb.v4l2_buf.timestamp; + tv->tv_sec = ts.tv_sec; + tv->tv_usec = ts.tv_nsec / NSEC_PER_USEC; + v_buf->vb.v4l2_buf.sequence = cap->frame_count++; + vb2_buffer_done(&v_buf->vb, VB2_BUF_STATE_DONE); } @@ -758,7 +768,7 @@ static void fimc_unlock(struct vb2_queue *vq) mutex_unlock(&ctx->fimc_dev->lock); } -struct vb2_ops fimc_qops = { +static struct vb2_ops fimc_qops = { .queue_setup = fimc_queue_setup, .buf_prepare = fimc_buf_prepare, .buf_queue = fimc_buf_queue, @@ -927,23 +937,23 @@ int fimc_vidioc_try_fmt_mplane(struct file *file, void *priv, pix->num_planes = fmt->memplanes; pix->colorspace = V4L2_COLORSPACE_JPEG; - for (i = 0; i < pix->num_planes; ++i) { - int bpl = pix->plane_fmt[i].bytesperline; - dbg("[%d] bpl: %d, depth: %d, w: %d, h: %d", - i, bpl, fmt->depth[i], pix->width, pix->height); + for (i = 0; i < pix->num_planes; ++i) { + u32 bpl = pix->plane_fmt[i].bytesperline; + u32 *sizeimage = &pix->plane_fmt[i].sizeimage; - if (!bpl || (bpl * 8 / fmt->depth[i]) > pix->width) - bpl = (pix->width * fmt->depth[0]) >> 3; + if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width)) + bpl = pix->width; /* Planar */ - if (!pix->plane_fmt[i].sizeimage) - pix->plane_fmt[i].sizeimage = pix->height * bpl; + if (fmt->colplanes == 1 && /* Packed */ + (bpl == 0 || ((bpl * 8) / fmt->depth[i]) < pix->width)) + bpl = (pix->width * fmt->depth[0]) / 8; - pix->plane_fmt[i].bytesperline = bpl; + if (i == 0) /* Same bytesperline for each plane. */ + mod_x = bpl; - dbg("[%d]: bpl: %d, sizeimage: %d", - i, pix->plane_fmt[i].bytesperline, - pix->plane_fmt[i].sizeimage); + pix->plane_fmt[i].bytesperline = mod_x; + *sizeimage = (pix->width * pix->height * fmt->depth[i]) / 8; } return 0; @@ -965,7 +975,7 @@ static int fimc_m2m_s_fmt_mplane(struct file *file, void *priv, vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); - if (vb2_is_streaming(vq)) { + if (vb2_is_busy(vq)) { v4l2_err(&fimc->m2m.v4l2_dev, "queue (%d) busy\n", f->type); return -EBUSY; } @@ -985,8 +995,10 @@ static int fimc_m2m_s_fmt_mplane(struct file *file, void *priv, if (!frame->fmt) return -EINVAL; - for (i = 0; i < frame->fmt->colplanes; i++) - frame->payload[i] = pix->plane_fmt[i].bytesperline * pix->height; + for (i = 0; i < frame->fmt->colplanes; i++) { + frame->payload[i] = + (pix->width * pix->height * frame->fmt->depth[i]) / 8; + } frame->f_width = pix->plane_fmt[0].bytesperline * 8 / frame->fmt->depth[0]; @@ -1750,7 +1762,7 @@ static int __devexit fimc_remove(struct platform_device *pdev) } /* Image pixel limits, similar across several FIMC HW revisions. */ -static struct fimc_pix_limit s5p_pix_limit[3] = { +static struct fimc_pix_limit s5p_pix_limit[4] = { [0] = { .scaler_en_w = 3264, .scaler_dis_w = 8192, @@ -1775,6 +1787,14 @@ static struct fimc_pix_limit s5p_pix_limit[3] = { .out_rot_en_w = 1280, .out_rot_dis_w = 1920, }, + [3] = { + .scaler_en_w = 1920, + .scaler_dis_w = 8192, + .in_rot_en_h = 1366, + .in_rot_dis_w = 8192, + .out_rot_en_w = 1366, + .out_rot_dis_w = 1920, + }, }; static struct samsung_fimc_variant fimc0_variant_s5p = { @@ -1827,7 +1847,7 @@ static struct samsung_fimc_variant fimc2_variant_s5pv210 = { .pix_limit = &s5p_pix_limit[2], }; -static struct samsung_fimc_variant fimc0_variant_s5pv310 = { +static struct samsung_fimc_variant fimc0_variant_exynos4 = { .pix_hoff = 1, .has_inp_rot = 1, .has_out_rot = 1, @@ -1840,7 +1860,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv310 = { .pix_limit = &s5p_pix_limit[1], }; -static struct samsung_fimc_variant fimc2_variant_s5pv310 = { +static struct samsung_fimc_variant fimc2_variant_exynos4 = { .pix_hoff = 1, .has_cistatus2 = 1, .has_mainscaler_ext = 1, @@ -1848,7 +1868,7 @@ static struct samsung_fimc_variant fimc2_variant_s5pv310 = { .min_out_pixsize = 16, .hor_offs_align = 1, .out_buf_count = 32, - .pix_limit = &s5p_pix_limit[2], + .pix_limit = &s5p_pix_limit[3], }; /* S5PC100 */ @@ -1874,12 +1894,12 @@ static struct samsung_fimc_driverdata fimc_drvdata_s5pv210 = { }; /* S5PV310, S5PC210 */ -static struct samsung_fimc_driverdata fimc_drvdata_s5pv310 = { +static struct samsung_fimc_driverdata fimc_drvdata_exynos4 = { .variant = { - [0] = &fimc0_variant_s5pv310, - [1] = &fimc0_variant_s5pv310, - [2] = &fimc0_variant_s5pv310, - [3] = &fimc2_variant_s5pv310, + [0] = &fimc0_variant_exynos4, + [1] = &fimc0_variant_exynos4, + [2] = &fimc0_variant_exynos4, + [3] = &fimc2_variant_exynos4, }, .num_entities = 4, .lclk_frequency = 166000000UL, @@ -1893,8 +1913,8 @@ static struct platform_device_id fimc_driver_ids[] = { .name = "s5pv210-fimc", .driver_data = (unsigned long)&fimc_drvdata_s5pv210, }, { - .name = "s5pv310-fimc", - .driver_data = (unsigned long)&fimc_drvdata_s5pv310, + .name = "exynos4-fimc", + .driver_data = (unsigned long)&fimc_drvdata_exynos4, }, {}, }; diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 3fe54bf41142..134e86bf6d97 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -922,7 +922,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int /* Try 2560x1920, 1280x960, 640x480, 320x240 */ mf.width = 2560 >> shift; mf.height = 1920 >> shift; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, s_mbus_fmt, &mf); if (ret < 0) return ret; @@ -1224,7 +1224,7 @@ static int client_s_fmt(struct soc_camera_device *icd, struct v4l2_cropcap cap; int ret; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, s_mbus_fmt, mf); if (ret < 0) return ret; @@ -1254,7 +1254,7 @@ static int client_s_fmt(struct soc_camera_device *icd, tmp_h = min(2 * tmp_h, max_height); mf->width = tmp_w; mf->height = tmp_h; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, s_mbus_fmt, mf); dev_geo(dev, "Camera scaled to %ux%u\n", mf->width, mf->height); @@ -1658,7 +1658,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, mf.code = xlate->code; mf.colorspace = pix->colorspace; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, try_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, try_mbus_fmt, &mf); if (ret < 0) return ret; @@ -1682,7 +1682,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, */ mf.width = 2560; mf.height = 1920; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, try_mbus_fmt, &mf); if (ret < 0) { /* Shouldn't actually happen... */ diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c index dd1b81b1442b..98b87481fa94 100644 --- a/drivers/media/video/sh_mobile_csi2.c +++ b/drivers/media/video/sh_mobile_csi2.c @@ -38,6 +38,8 @@ struct sh_csi2 { void __iomem *base; struct platform_device *pdev; struct sh_csi2_client_config *client; + unsigned long (*query_bus_param)(struct soc_camera_device *); + int (*set_bus_param)(struct soc_camera_device *, unsigned long); }; static int sh_csi2_try_fmt(struct v4l2_subdev *sd, @@ -208,6 +210,7 @@ static int sh_csi2_notify(struct notifier_block *nb, case BUS_NOTIFY_BOUND_DRIVER: snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s%s", dev_name(v4l2_dev->dev), ".mipi-csi"); + priv->subdev.grp_id = (long)icd; ret = v4l2_device_register_subdev(v4l2_dev, &priv->subdev); dev_dbg(dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret); if (ret < 0) @@ -215,6 +218,8 @@ static int sh_csi2_notify(struct notifier_block *nb, priv->client = pdata->clients + i; + priv->set_bus_param = icd->ops->set_bus_param; + priv->query_bus_param = icd->ops->query_bus_param; icd->ops->set_bus_param = sh_csi2_set_bus_param; icd->ops->query_bus_param = sh_csi2_query_bus_param; @@ -226,8 +231,10 @@ static int sh_csi2_notify(struct notifier_block *nb, priv->client = NULL; /* Driver is about to be unbound */ - icd->ops->set_bus_param = NULL; - icd->ops->query_bus_param = NULL; + icd->ops->set_bus_param = priv->set_bus_param; + icd->ops->query_bus_param = priv->query_bus_param; + priv->set_bus_param = NULL; + priv->query_bus_param = NULL; v4l2_device_unregister_subdev(&priv->subdev); diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 46284489e4eb..3973f9a94753 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -996,10 +996,11 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd) { struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); + struct i2c_adapter *adap = client->adapter; dev_set_drvdata(&icd->dev, NULL); v4l2_device_unregister_subdev(i2c_get_clientdata(client)); i2c_unregister_device(client); - i2c_put_adapter(client->adapter); + i2c_put_adapter(adap); } #else #define soc_camera_init_i2c(icd, icl) (-ENODEV) @@ -1071,6 +1072,9 @@ static int soc_camera_probe(struct device *dev) } } + sd = soc_camera_to_subdev(icd); + sd->grp_id = (long)icd; + /* At this point client .probe() should have run already */ ret = soc_camera_init_user_formats(icd); if (ret < 0) @@ -1092,7 +1096,6 @@ static int soc_camera_probe(struct device *dev) goto evidstart; /* Try to improve our guess of a reasonable window format */ - sd = soc_camera_to_subdev(icd); if (!v4l2_subdev_call(sd, video, g_mbus_fmt, &mf)) { icd->user_width = mf.width; icd->user_height = mf.height; diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 498e6742579e..6dc7196296b3 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -389,7 +389,8 @@ static int v4l2_open(struct inode *inode, struct file *filp) video_get(vdev); mutex_unlock(&videodev_lock); #if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) { + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) { entity = media_entity_get(&vdev->entity); if (!entity) { ret = -EBUSY; @@ -415,7 +416,8 @@ err: /* decrease the refcount in case of an error */ if (ret) { #if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) media_entity_put(entity); #endif video_put(vdev); @@ -437,7 +439,8 @@ static int v4l2_release(struct inode *inode, struct file *filp) mutex_unlock(vdev->lock); } #if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) media_entity_put(&vdev->entity); #endif /* decrease the refcount unconditionally since the release() @@ -686,7 +689,8 @@ int __video_register_device(struct video_device *vdev, int type, int nr, #if defined(CONFIG_MEDIA_CONTROLLER) /* Part 5: Register the entity. */ - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) { + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) { vdev->entity.type = MEDIA_ENT_T_DEVNODE_V4L; vdev->entity.name = vdev->name; vdev->entity.v4l.major = VIDEO_MAJOR; @@ -733,7 +737,8 @@ void video_unregister_device(struct video_device *vdev) return; #if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) media_device_unregister_entity(&vdev->entity); #endif diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 6698c77e0f64..6ba1461d51ef 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -37,6 +37,9 @@ module_param(debug, int, 0644); #define call_qop(q, op, args...) \ (((q)->ops->op) ? ((q)->ops->op(args)) : 0) +#define V4L2_BUFFER_STATE_FLAGS (V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | \ + V4L2_BUF_FLAG_DONE | V4L2_BUF_FLAG_ERROR) + /** * __vb2_buf_mem_alloc() - allocate video memory for the given buffer */ @@ -51,7 +54,7 @@ static int __vb2_buf_mem_alloc(struct vb2_buffer *vb, for (plane = 0; plane < vb->num_planes; ++plane) { mem_priv = call_memop(q, plane, alloc, q->alloc_ctx[plane], plane_sizes[plane]); - if (!mem_priv) + if (IS_ERR_OR_NULL(mem_priv)) goto free; /* Associate allocator private data with this plane */ @@ -284,7 +287,7 @@ static int __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b) struct vb2_queue *q = vb->vb2_queue; int ret = 0; - /* Copy back data such as timestamp, input, etc. */ + /* Copy back data such as timestamp, flags, input, etc. */ memcpy(b, &vb->v4l2_buf, offsetof(struct v4l2_buffer, m)); b->input = vb->v4l2_buf.input; b->reserved = vb->v4l2_buf.reserved; @@ -313,7 +316,10 @@ static int __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b) b->m.userptr = vb->v4l2_planes[0].m.userptr; } - b->flags = 0; + /* + * Clear any buffer state related flags. + */ + b->flags &= ~V4L2_BUFFER_STATE_FLAGS; switch (vb->state) { case VB2_BUF_STATE_QUEUED: @@ -519,6 +525,7 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) num_buffers = min_t(unsigned int, req->count, VIDEO_MAX_FRAME); memset(plane_sizes, 0, sizeof(plane_sizes)); memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx)); + q->memory = req->memory; /* * Ask the driver how many buffers and planes per buffer it requires. @@ -560,8 +567,6 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) ret = num_buffers; } - q->memory = req->memory; - /* * Return the number of successfully allocated buffers * to the userspace. @@ -715,6 +720,8 @@ static int __fill_vb2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b, vb->v4l2_buf.field = b->field; vb->v4l2_buf.timestamp = b->timestamp; + vb->v4l2_buf.input = b->input; + vb->v4l2_buf.flags = b->flags & ~V4L2_BUFFER_STATE_FLAGS; return 0; } diff --git a/drivers/media/video/videobuf2-dma-contig.c b/drivers/media/video/videobuf2-dma-contig.c index 58205d596138..a790a5f8c06f 100644 --- a/drivers/media/video/videobuf2-dma-contig.c +++ b/drivers/media/video/videobuf2-dma-contig.c @@ -46,7 +46,7 @@ static void *vb2_dma_contig_alloc(void *alloc_ctx, unsigned long size) GFP_KERNEL); if (!buf->vaddr) { dev_err(conf->dev, "dma_alloc_coherent of size %ld failed\n", - buf->size); + size); kfree(buf); return ERR_PTR(-ENOMEM); } diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 96c0b34ba8db..657b9f4b6f9b 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -400,7 +400,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE); doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - /* We can't' use dev_ready here, but at least we wait for the + /* We can't use dev_ready here, but at least we wait for the * command to complete */ udelay(50); diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index fe77e8223841..e8c19def1b0f 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -173,7 +173,7 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev, c = p_dev->function_config; if (!(c->state & CONFIG_LOCKED)) { - dev_dbg(&p_dev->dev, "Configuration isn't't locked\n"); + dev_dbg(&p_dev->dev, "Configuration isn't locked\n"); mutex_unlock(&s->ops_mutex); return -EACCES; } diff --git a/drivers/rtc/rtc-max8925.c b/drivers/rtc/rtc-max8925.c index 174036dda786..20494b5edc3c 100644 --- a/drivers/rtc/rtc-max8925.c +++ b/drivers/rtc/rtc-max8925.c @@ -257,6 +257,8 @@ static int __devinit max8925_rtc_probe(struct platform_device *pdev) goto out_irq; } + dev_set_drvdata(&pdev->dev, info); + info->rtc_dev = rtc_device_register("max8925-rtc", &pdev->dev, &max8925_rtc_ops, THIS_MODULE); ret = PTR_ERR(info->rtc_dev); @@ -265,7 +267,6 @@ static int __devinit max8925_rtc_probe(struct platform_device *pdev) goto out_rtc; } - dev_set_drvdata(&pdev->dev, info); platform_set_drvdata(pdev, info); return 0; diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index 29143eda9dd9..85dddb1e4126 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -239,7 +239,6 @@ static void dasd_ext_handler(unsigned int ext_int_code, addr_t ip; int rc; - kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++; switch (ext_int_code >> 24) { case DASD_DIAG_CODE_31BIT: ip = (addr_t) param32; @@ -250,6 +249,7 @@ static void dasd_ext_handler(unsigned int ext_int_code, default: return; } + kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++; if (!ip) { /* no intparm: unsolicited interrupt */ DBF_EVENT(DBF_NOTICE, "%s", "caught unsolicited " "interrupt"); diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 414427d64a8f..607998f0b7d8 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -381,10 +381,10 @@ static void kvm_extint_handler(unsigned int ext_int_code, u16 subcode; u32 param; - kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++; subcode = ext_int_code >> 16; if ((subcode & 0xff00) != VIRTIO_SUBCODE_64) return; + kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++; /* The LSB might be overloaded, we have to mask it */ vq = (struct virtqueue *)(param64 & ~1UL); diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c index 564e6ecd17c2..0119b8147797 100644 --- a/drivers/scsi/device_handler/scsi_dh.c +++ b/drivers/scsi/device_handler/scsi_dh.c @@ -394,12 +394,14 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data) unsigned long flags; struct scsi_device *sdev; struct scsi_device_handler *scsi_dh = NULL; + struct device *dev = NULL; spin_lock_irqsave(q->queue_lock, flags); sdev = q->queuedata; if (sdev && sdev->scsi_dh_data) scsi_dh = sdev->scsi_dh_data->scsi_dh; - if (!scsi_dh || !get_device(&sdev->sdev_gendev) || + dev = get_device(&sdev->sdev_gendev); + if (!scsi_dh || !dev || sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) err = SCSI_DH_NOSYS; @@ -410,12 +412,13 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data) if (err) { if (fn) fn(data, err); - return err; + goto out; } if (scsi_dh->activate) err = scsi_dh->activate(sdev, fn, data); - put_device(&sdev->sdev_gendev); +out: + put_device(dev); return err; } EXPORT_SYMBOL_GPL(scsi_dh_activate); diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 1c6d2b405eef..d72f1f2b1392 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -688,6 +688,13 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, goto out; } + /* Check for overflow and wraparound */ + if (karg.data_sge_offset * 4 > ioc->request_sz || + karg.data_sge_offset > (UINT_MAX / 4)) { + ret = -EINVAL; + goto out; + } + /* copy in request message frame from user */ if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) { printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__, @@ -1963,7 +1970,7 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state) Mpi2DiagBufferPostReply_t *mpi_reply; int rc, i; u8 buffer_type; - unsigned long timeleft; + unsigned long timeleft, request_size, copy_size; u16 smid; u16 ioc_status; u8 issue_reset = 0; @@ -1999,6 +2006,8 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state) return -ENOMEM; } + request_size = ioc->diag_buffer_sz[buffer_type]; + if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) { printk(MPT2SAS_ERR_FMT "%s: either the starting_offset " "or bytes_to_read are not 4 byte aligned\n", ioc->name, @@ -2006,13 +2015,23 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state) return -EINVAL; } + if (karg.starting_offset > request_size) + return -EINVAL; + diag_data = (void *)(request_data + karg.starting_offset); dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(%p), " "offset(%d), sz(%d)\n", ioc->name, __func__, diag_data, karg.starting_offset, karg.bytes_to_read)); + /* Truncate data on requests that are too large */ + if ((diag_data + karg.bytes_to_read < diag_data) || + (diag_data + karg.bytes_to_read > request_data + request_size)) + copy_size = request_size - karg.starting_offset; + else + copy_size = karg.bytes_to_read; + if (copy_to_user((void __user *)uarg->diagnostic_data, - diag_data, karg.bytes_to_read)) { + diag_data, copy_size)) { printk(MPT2SAS_ERR_FMT "%s: Unable to write " "mpt_diag_read_buffer_t data @ %p\n", ioc->name, __func__, diag_data); diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 96d5ad0c1e42..7f636b118287 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -3814,6 +3814,9 @@ static long pmcraid_ioctl_passthrough( rc = -EFAULT; goto out_free_buffer; } + } else if (request_size < 0) { + rc = -EINVAL; + goto out_free_buffer; } /* check if we have any additional command parameters */ diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index e44ff64233fd..e63912510fb9 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -322,14 +322,8 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) kfree(evt); } - if (sdev->request_queue) { - sdev->request_queue->queuedata = NULL; - /* user context needed to free queue */ - scsi_free_queue(sdev->request_queue); - /* temporary expedient, try to catch use of queue lock - * after free of sdev */ - sdev->request_queue = NULL; - } + /* NULL queue means the device can't be used */ + sdev->request_queue = NULL; scsi_target_reap(scsi_target(sdev)); @@ -937,6 +931,12 @@ void __scsi_remove_device(struct scsi_device *sdev) if (sdev->host->hostt->slave_destroy) sdev->host->hostt->slave_destroy(sdev); transport_destroy_device(dev); + + /* cause the request function to reject all I/O requests */ + sdev->request_queue->queuedata = NULL; + + /* Freeing the queue signals to block that we're done */ + scsi_free_queue(sdev->request_queue); put_device(dev); } diff --git a/drivers/staging/rt2860/common/cmm_data_pci.c b/drivers/staging/rt2860/common/cmm_data_pci.c index bef0bbd8cef7..f01a51c381f1 100644 --- a/drivers/staging/rt2860/common/cmm_data_pci.c +++ b/drivers/staging/rt2860/common/cmm_data_pci.c @@ -444,7 +444,7 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd, return (NDIS_STATUS_FAILURE); } } - /* Drop not U2M frames, can't's drop here because we will drop beacon in this case */ + /* Drop not U2M frames, can't drop here because we will drop beacon in this case */ /* I am kind of doubting the U2M bit operation */ /* if (pRxD->U2M == 0) */ /* return(NDIS_STATUS_FAILURE); */ diff --git a/drivers/staging/rt2860/common/cmm_data_usb.c b/drivers/staging/rt2860/common/cmm_data_usb.c index 5637857ae9eb..83a62faa7e57 100644 --- a/drivers/staging/rt2860/common/cmm_data_usb.c +++ b/drivers/staging/rt2860/common/cmm_data_usb.c @@ -860,7 +860,7 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd, DBGPRINT_RAW(RT_DEBUG_ERROR, ("received packet too long\n")); return NDIS_STATUS_FAILURE; } - /* Drop not U2M frames, can't's drop here because we will drop beacon in this case */ + /* Drop not U2M frames, can't drop here because we will drop beacon in this case */ /* I am kind of doubting the U2M bit operation */ /* if (pRxD->U2M == 0) */ /* return(NDIS_STATUS_FAILURE); */ diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c index 20dae73d3b78..506547b603e1 100644 --- a/drivers/staging/spectra/ffsport.c +++ b/drivers/staging/spectra/ffsport.c @@ -653,7 +653,7 @@ static int SBD_setup_device(struct spectra_nand_dev *dev, int which) } dev->queue->queuedata = dev; - /* As Linux block layer does't support >4KB hardware sector, */ + /* As Linux block layer doesn't support >4KB hardware sector, */ /* Here we force report 512 byte hardware sector size to Kernel */ blk_queue_logical_block_size(dev->queue, 512); diff --git a/drivers/staging/tidspbridge/dynload/cload.c b/drivers/staging/tidspbridge/dynload/cload.c index 5cecd237e3f6..fe1ef0addb09 100644 --- a/drivers/staging/tidspbridge/dynload/cload.c +++ b/drivers/staging/tidspbridge/dynload/cload.c @@ -718,7 +718,7 @@ static void dload_symbols(struct dload_state *dlthis) * as a temporary for .dllview record construction. * Allocate storage for the whole table. Add 1 to the section count * in case a trampoline section is auto-generated as well as the - * size of the trampoline section name so DLLView does't get lost. + * size of the trampoline section name so DLLView doesn't get lost. */ siz = sym_count * sizeof(struct local_symbol); diff --git a/drivers/staging/tty/specialix.c b/drivers/staging/tty/specialix.c index cb24c6d999db..5c3598ec7456 100644 --- a/drivers/staging/tty/specialix.c +++ b/drivers/staging/tty/specialix.c @@ -978,7 +978,7 @@ static void sx_change_speed(struct specialix_board *bp, spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CAR, port_No(port)); - /* The Specialix board does't implement the RTS lines. + /* The Specialix board doesn't implement the RTS lines. They are used to set the IRQ level. Don't touch them. */ if (sx_crtscts(tty)) port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS); |