summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/tty/Kconfig2
-rw-r--r--drivers/tty/mxser.c348
2 files changed, 8 insertions, 342 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index f6a7fd6d3bb6..476c11278235 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -204,7 +204,7 @@ config MOXA_INTELLIO
config MOXA_SMARTIO
tristate "Moxa SmartIO support v. 2.0"
- depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ depends on SERIAL_NONSTANDARD && PCI
help
Say Y here if you have a Moxa SmartIO multiport serial card and/or
want to help develop a new version of this driver.
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index a74e6146a748..3a00f180f54a 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -70,18 +70,8 @@
#define PCI_DEVICE_ID_CB134I 0x1341
#define PCI_DEVICE_ID_CP138U 0x1380
-
-#define C168_ASIC_ID 1
-#define C104_ASIC_ID 2
-#define C102_ASIC_ID 0xB
-#define CI132_ASIC_ID 4
-#define CI134_ASIC_ID 3
-#define CI104J_ASIC_ID 5
-
#define MXSER_HIGHBAUD 1
-#define MXSER_HAS2 2
-/* This is only for PCI */
static const struct {
int type;
int tx_fifo;
@@ -105,14 +95,14 @@ struct mxser_cardinfo {
};
static const struct mxser_cardinfo mxser_cards[] = {
-/* 0*/ { "C168 series", 8, },
- { "C104 series", 4, },
- { "CI-104J series", 4, },
+/* 0*/ { },
+ { },
+ { },
{ "C168H/PCI series", 8, },
{ "C104H/PCI series", 4, },
-/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */
- { "CI-132 series", 4, MXSER_HAS2 },
- { "CI-134 series", 4, },
+/* 5*/ { },
+ { },
+ { },
{ "CP-132 series", 2, },
{ "CP-114 series", 4, },
/*10*/ { "CT-114 series", 4, },
@@ -172,15 +162,12 @@ static const struct pci_device_id mxser_pcibrds[] = {
};
MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
-static unsigned long ioaddr[MXSER_BOARDS];
static int ttymajor = MXSERMAJOR;
/* Variables for insmod */
MODULE_AUTHOR("Casper Yang");
MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
-module_param_hw_array(ioaddr, ulong, ioport, NULL, 0);
-MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
module_param(ttymajor, int, 0);
MODULE_LICENSE("GPL");
@@ -300,7 +287,6 @@ static void mxser_enable_must_enchance_mode(unsigned long baseio)
outb(oldlcr, baseio + UART_LCR);
}
-#ifdef CONFIG_PCI
static void mxser_disable_must_enchance_mode(unsigned long baseio)
{
u8 oldlcr;
@@ -315,7 +301,6 @@ static void mxser_disable_must_enchance_mode(unsigned long baseio)
outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
outb(oldlcr, baseio + UART_LCR);
}
-#endif
static void mxser_set_must_xon1_value(unsigned long baseio, u8 value)
{
@@ -387,7 +372,6 @@ static void mxser_set_must_enum_value(unsigned long baseio, u8 value)
outb(oldlcr, baseio + UART_LCR);
}
-#ifdef CONFIG_PCI
static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
{
u8 oldlcr;
@@ -404,7 +388,6 @@ static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
*pId = inb(baseio + MOXA_MUST_HWID_REGISTER);
outb(oldlcr, baseio + UART_LCR);
}
-#endif
static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio)
{
@@ -483,7 +466,6 @@ static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
outb(oldlcr, baseio + UART_LCR);
}
-#ifdef CONFIG_PCI
static int CheckIsMoxaMust(unsigned long io)
{
u8 oldmcr, hwid;
@@ -506,7 +488,6 @@ static int CheckIsMoxaMust(unsigned long io)
}
return MOXA_OTHER_UART;
}
-#endif
static void process_txrx_fifo(struct mxser_port *info)
{
@@ -1398,109 +1379,6 @@ static int mxser_tiocmset(struct tty_struct *tty,
return 0;
}
-static int __init mxser_program_mode(int port)
-{
- int id, i, j, n;
-
- outb(0, port);
- outb(0, port);
- outb(0, port);
- (void)inb(port);
- (void)inb(port);
- outb(0, port);
- (void)inb(port);
-
- id = inb(port + 1) & 0x1F;
- if ((id != C168_ASIC_ID) &&
- (id != C104_ASIC_ID) &&
- (id != C102_ASIC_ID) &&
- (id != CI132_ASIC_ID) &&
- (id != CI134_ASIC_ID) &&
- (id != CI104J_ASIC_ID))
- return -1;
- for (i = 0, j = 0; i < 4; i++) {
- n = inb(port + 2);
- if (n == 'M') {
- j = 1;
- } else if ((j == 1) && (n == 1)) {
- j = 2;
- break;
- } else
- j = 0;
- }
- if (j != 2)
- id = -2;
- return id;
-}
-
-static void __init mxser_normal_mode(int port)
-{
- int i, n;
-
- outb(0xA5, port + 1);
- outb(0x80, port + 3);
- outb(12, port + 0); /* 9600 bps */
- outb(0, port + 1);
- outb(0x03, port + 3); /* 8 data bits */
- outb(0x13, port + 4); /* loop back mode */
- for (i = 0; i < 16; i++) {
- n = inb(port + 5);
- if ((n & 0x61) == 0x60)
- break;
- if ((n & 1) == 1)
- (void)inb(port);
- }
- outb(0x00, port + 4);
-}
-
-#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */
-#define CHIP_DO 0x02 /* Serial Data Output in Eprom */
-#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */
-#define CHIP_DI 0x08 /* Serial Data Input in Eprom */
-#define EN_CCMD 0x000 /* Chip's command register */
-#define EN0_RSARLO 0x008 /* Remote start address reg 0 */
-#define EN0_RSARHI 0x009 /* Remote start address reg 1 */
-#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */
-#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */
-#define EN0_DCFG 0x00E /* Data configuration reg WR */
-#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */
-#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */
-#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */
-static int __init mxser_read_register(int port, unsigned short *regs)
-{
- int i, k, value, id;
- unsigned int j;
-
- id = mxser_program_mode(port);
- if (id < 0)
- return id;
- for (i = 0; i < 14; i++) {
- k = (i & 0x3F) | 0x180;
- for (j = 0x100; j > 0; j >>= 1) {
- outb(CHIP_CS, port);
- if (k & j) {
- outb(CHIP_CS | CHIP_DO, port);
- outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */
- } else {
- outb(CHIP_CS, port);
- outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */
- }
- }
- (void)inb(port);
- value = 0;
- for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
- outb(CHIP_CS, port);
- outb(CHIP_CS | CHIP_SK, port);
- if (inb(port) & CHIP_DI)
- value |= j;
- }
- regs[i] = value;
- outb(0, port);
- }
- mxser_normal_mode(port);
- return id;
-}
-
static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
{
struct mxser_port *ip;
@@ -2346,37 +2224,6 @@ static const struct tty_port_operations mxser_port_ops = {
* The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
-static bool allow_overlapping_vector;
-module_param(allow_overlapping_vector, bool, S_IRUGO);
-MODULE_PARM_DESC(allow_overlapping_vector, "whether we allow ISA cards to be configured such that vector overlabs IO ports (default=no)");
-
-static bool mxser_overlapping_vector(struct mxser_board *brd)
-{
- return allow_overlapping_vector &&
- brd->vector >= brd->ports[0].ioaddr &&
- brd->vector < brd->ports[0].ioaddr + 8 * brd->info->nports;
-}
-
-static int mxser_request_vector(struct mxser_board *brd)
-{
- if (mxser_overlapping_vector(brd))
- return 0;
- return request_region(brd->vector, 1, "mxser(vector)") ? 0 : -EIO;
-}
-
-static void mxser_release_vector(struct mxser_board *brd)
-{
- if (mxser_overlapping_vector(brd))
- return;
- release_region(brd->vector, 1);
-}
-
-static void mxser_release_ISA_res(struct mxser_board *brd)
-{
- release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- mxser_release_vector(brd);
-}
-
static int mxser_initbrd(struct mxser_board *brd)
{
struct mxser_port *info;
@@ -2439,125 +2286,9 @@ static void mxser_board_remove(struct mxser_board *brd)
free_irq(brd->irq, brd);
}
-static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
-{
- int id, i, bits, ret;
- unsigned short regs[16], irq;
- unsigned char scratch, scratch2;
-
- brd->chip_flag = MOXA_OTHER_UART;
-
- id = mxser_read_register(cap, regs);
- switch (id) {
- case C168_ASIC_ID:
- brd->info = &mxser_cards[0];
- break;
- case C104_ASIC_ID:
- brd->info = &mxser_cards[1];
- break;
- case CI104J_ASIC_ID:
- brd->info = &mxser_cards[2];
- break;
- case C102_ASIC_ID:
- brd->info = &mxser_cards[5];
- break;
- case CI132_ASIC_ID:
- brd->info = &mxser_cards[6];
- break;
- case CI134_ASIC_ID:
- brd->info = &mxser_cards[7];
- break;
- default:
- return 0;
- }
-
- irq = 0;
- /* some ISA cards have 2 ports, but we want to see them as 4-port (why?)
- Flag-hack checks if configuration should be read as 2-port here. */
- if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) {
- irq = regs[9] & 0xF000;
- irq = irq | (irq >> 4);
- if (irq != (regs[9] & 0xFF00))
- goto err_irqconflict;
- } else if (brd->info->nports == 4) {
- irq = regs[9] & 0xF000;
- irq = irq | (irq >> 4);
- irq = irq | (irq >> 8);
- if (irq != regs[9])
- goto err_irqconflict;
- } else if (brd->info->nports == 8) {
- irq = regs[9] & 0xF000;
- irq = irq | (irq >> 4);
- irq = irq | (irq >> 8);
- if ((irq != regs[9]) || (irq != regs[10]))
- goto err_irqconflict;
- }
-
- if (!irq) {
- printk(KERN_ERR "mxser: interrupt number unset\n");
- return -EIO;
- }
- brd->irq = ((int)(irq & 0xF000) >> 12);
- for (i = 0; i < 8; i++)
- brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
- if ((regs[12] & 0x80) == 0) {
- printk(KERN_ERR "mxser: invalid interrupt vector\n");
- return -EIO;
- }
- brd->vector = (int)regs[11]; /* interrupt vector */
- if (id == 1)
- brd->vector_mask = 0x00FF;
- else
- brd->vector_mask = 0x000F;
- for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
- if (regs[12] & bits) {
- brd->ports[i].baud_base = 921600;
- brd->ports[i].max_baud = 921600;
- } else {
- brd->ports[i].baud_base = 115200;
- brd->ports[i].max_baud = 115200;
- }
- }
- scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
- outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR);
- outb(0, cap + UART_EFR); /* EFR is the same as FCR */
- outb(scratch2, cap + UART_LCR);
- outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR);
- scratch = inb(cap + UART_IIR);
-
- if (scratch & 0xC0)
- brd->uart_type = PORT_16550A;
- else
- brd->uart_type = PORT_16450;
- if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
- "mxser(IO)")) {
- printk(KERN_ERR "mxser: can't request ports I/O region: "
- "0x%.8lx-0x%.8lx\n",
- brd->ports[0].ioaddr, brd->ports[0].ioaddr +
- 8 * brd->info->nports - 1);
- return -EIO;
- }
-
- ret = mxser_request_vector(brd);
- if (ret) {
- release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- printk(KERN_ERR "mxser: can't request interrupt vector region: "
- "0x%.8lx-0x%.8lx\n",
- brd->ports[0].ioaddr, brd->ports[0].ioaddr +
- 8 * brd->info->nports - 1);
- return ret;
- }
- return brd->info->nports;
-
-err_irqconflict:
- printk(KERN_ERR "mxser: invalid interrupt number\n");
- return -EIO;
-}
-
static int mxser_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
-#ifdef CONFIG_PCI
struct mxser_board *brd;
unsigned int i, j;
unsigned long ioaddress;
@@ -2673,14 +2404,10 @@ err_dis:
pci_disable_device(pdev);
err:
return retval;
-#else
- return -ENODEV;
-#endif
}
static void mxser_remove(struct pci_dev *pdev)
{
-#ifdef CONFIG_PCI
struct mxser_board *brd = pci_get_drvdata(pdev);
mxser_board_remove(brd);
@@ -2689,7 +2416,6 @@ static void mxser_remove(struct pci_dev *pdev)
pci_release_region(pdev, 3);
pci_disable_device(pdev);
brd->info = NULL;
-#endif
}
static struct pci_driver mxser_driver = {
@@ -2701,9 +2427,6 @@ static struct pci_driver mxser_driver = {
static int __init mxser_module_init(void)
{
- struct mxser_board *brd;
- struct device *tty_dev;
- unsigned int b, i, m;
int retval;
mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
@@ -2731,57 +2454,10 @@ static int __init mxser_module_init(void)
goto err_put;
}
- /* Start finding ISA boards here */
- for (m = 0, b = 0; b < MXSER_BOARDS; b++) {
- if (!ioaddr[b])
- continue;
-
- brd = &mxser_boards[m];
- retval = mxser_get_ISA_conf(ioaddr[b], brd);
- if (retval <= 0) {
- brd->info = NULL;
- continue;
- }
-
- printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n",
- brd->info->name, ioaddr[b]);
-
- /* mxser_initbrd will hook ISR. */
- if (mxser_initbrd(brd) < 0) {
- mxser_release_ISA_res(brd);
- brd->info = NULL;
- continue;
- }
-
- brd->idx = m * MXSER_PORTS_PER_BOARD;
- for (i = 0; i < brd->info->nports; i++) {
- tty_dev = tty_port_register_device(&brd->ports[i].port,
- mxvar_sdriver, brd->idx + i, NULL);
- if (IS_ERR(tty_dev)) {
- for (; i > 0; i--)
- tty_unregister_device(mxvar_sdriver,
- brd->idx + i - 1);
- for (i = 0; i < brd->info->nports; i++)
- tty_port_destroy(&brd->ports[i].port);
- free_irq(brd->irq, brd);
- mxser_release_ISA_res(brd);
- brd->info = NULL;
- break;
- }
- }
- if (brd->info == NULL)
- continue;
-
- m++;
- }
-
retval = pci_register_driver(&mxser_driver);
if (retval) {
printk(KERN_ERR "mxser: can't register pci driver\n");
- if (!m) {
- retval = -ENODEV;
- goto err_unr;
- } /* else: we have some ISA cards under control */
+ goto err_unr;
}
return 0;
@@ -2794,19 +2470,9 @@ err_put:
static void __exit mxser_module_exit(void)
{
- unsigned int i;
-
pci_unregister_driver(&mxser_driver);
-
- for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
- if (mxser_boards[i].info != NULL)
- mxser_board_remove(&mxser_boards[i]);
tty_unregister_driver(mxvar_sdriver);
put_tty_driver(mxvar_sdriver);
-
- for (i = 0; i < MXSER_BOARDS; i++)
- if (mxser_boards[i].info != NULL)
- mxser_release_ISA_res(&mxser_boards[i]);
}
module_init(mxser_module_init);
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 02:04:30 +0000