diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/input/touchscreen/ads7846.c | 84 |
1 files changed, 42 insertions, 42 deletions
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 24ff6c5a4021..c741776ef3bf 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -345,19 +345,15 @@ static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs) /*--------------------------------------------------------------------------*/ -/* non-empty "extra" is needed before 2.6.14-git5 or so */ -#define EXTRA // , u32 level -#define EXTRA2 // , 0 - static int -ads7846_suspend(struct device *dev, pm_message_t message EXTRA) +ads7846_suspend(struct spi_device *spi, pm_message_t message) { - struct ads7846 *ts = dev_get_drvdata(dev); + struct ads7846 *ts = dev_get_drvdata(&spi->dev); unsigned long flags; spin_lock_irqsave(&ts->lock, flags); - ts->spi->dev.power.power_state = message; + spi->dev.power.power_state = message; /* are we waiting for IRQ, or polling? */ if (!ts->pendown) { @@ -387,36 +383,35 @@ ads7846_suspend(struct device *dev, pm_message_t message EXTRA) return 0; } -static int ads7846_resume(struct device *dev EXTRA) +static int ads7846_resume(struct spi_device *spi) { - struct ads7846 *ts = dev_get_drvdata(dev); + struct ads7846 *ts = dev_get_drvdata(&spi->dev); ts->irq_disabled = 0; enable_irq(ts->spi->irq); - dev->power.power_state = PMSG_ON; + spi->dev.power.power_state = PMSG_ON; return 0; } -static int __init ads7846_probe(struct device *dev) +static int __devinit ads7846_probe(struct spi_device *spi) { - struct spi_device *spi = to_spi_device(dev); struct ads7846 *ts; - struct ads7846_platform_data *pdata = dev->platform_data; + struct ads7846_platform_data *pdata = spi->dev.platform_data; struct spi_transfer *x; if (!spi->irq) { - dev_dbg(dev, "no IRQ?\n"); + dev_dbg(&spi->dev, "no IRQ?\n"); return -ENODEV; } if (!pdata) { - dev_dbg(dev, "no platform data?\n"); + dev_dbg(&spi->dev, "no platform data?\n"); return -ENODEV; } /* don't exceed max specified sample rate */ if (spi->max_speed_hz > (125000 * 16)) { - dev_dbg(dev, "f(sample) %d KHz?\n", + dev_dbg(&spi->dev, "f(sample) %d KHz?\n", (spi->max_speed_hz/16)/1000); return -EINVAL; } @@ -430,7 +425,7 @@ static int __init ads7846_probe(struct device *dev) if (!(ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL))) return -ENOMEM; - dev_set_drvdata(dev, ts); + dev_set_drvdata(&spi->dev, ts); ts->spi = spi; spi->dev.power.power_state = PMSG_ON; @@ -445,9 +440,9 @@ static int __init ads7846_probe(struct device *dev) init_input_dev(&ts->input); - ts->input.dev = dev; + ts->input.dev = &spi->dev; ts->input.name = "ADS784x Touchscreen"; - snprintf(ts->phys, sizeof ts->phys, "%s/input0", dev->bus_id); + snprintf(ts->phys, sizeof ts->phys, "%s/input0", spi->dev.bus_id); ts->input.phys = ts->phys; ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); @@ -511,65 +506,68 @@ static int __init ads7846_probe(struct device *dev) ts->msg.context = ts; if (request_irq(spi->irq, ads7846_irq, SA_SAMPLE_RANDOM, - dev->bus_id, ts)) { - dev_dbg(dev, "irq %d busy?\n", spi->irq); + spi->dev.bus_id, ts)) { + dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); input_unregister_device(&ts->input); kfree(ts); return -EBUSY; } set_irq_type(spi->irq, IRQT_FALLING); - dev_info(dev, "touchscreen, irq %d\n", spi->irq); + dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq); /* take a first sample, leaving nPENIRQ active; avoid * the touchscreen, in case it's not connected. */ - (void) ads7846_read12_ser(dev, + (void) ads7846_read12_ser(&spi->dev, READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON); /* ads7843/7845 don't have temperature sensors, and * use the other sensors a bit differently too */ if (ts->model == 7846) { - device_create_file(dev, &dev_attr_temp0); - device_create_file(dev, &dev_attr_temp1); + device_create_file(&spi->dev, &dev_attr_temp0); + device_create_file(&spi->dev, &dev_attr_temp1); } if (ts->model != 7845) - device_create_file(dev, &dev_attr_vbatt); - device_create_file(dev, &dev_attr_vaux); + device_create_file(&spi->dev, &dev_attr_vbatt); + device_create_file(&spi->dev, &dev_attr_vaux); return 0; } -static int __exit ads7846_remove(struct device *dev) +static int __devexit ads7846_remove(struct spi_device *spi) { - struct ads7846 *ts = dev_get_drvdata(dev); + struct ads7846 *ts = dev_get_drvdata(&spi->dev); - ads7846_suspend(dev, PMSG_SUSPEND EXTRA2); + ads7846_suspend(spi, PMSG_SUSPEND); free_irq(ts->spi->irq, ts); if (ts->irq_disabled) enable_irq(ts->spi->irq); if (ts->model == 7846) { - device_remove_file(dev, &dev_attr_temp0); - device_remove_file(dev, &dev_attr_temp1); + device_remove_file(&spi->dev, &dev_attr_temp0); + device_remove_file(&spi->dev, &dev_attr_temp1); } if (ts->model != 7845) - device_remove_file(dev, &dev_attr_vbatt); - device_remove_file(dev, &dev_attr_vaux); + device_remove_file(&spi->dev, &dev_attr_vbatt); + device_remove_file(&spi->dev, &dev_attr_vaux); input_unregister_device(&ts->input); kfree(ts); - dev_dbg(dev, "unregistered touchscreen\n"); + dev_dbg(&spi->dev, "unregistered touchscreen\n"); return 0; } -static struct device_driver ads7846_driver = { - .name = "ads7846", - .bus = &spi_bus_type, +static struct spi_driver ads7846_driver = { + .driver = { + .name = "ads7846", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, .probe = ads7846_probe, - .remove = __exit_p(ads7846_remove), + .remove = __devexit_p(ads7846_remove), .suspend = ads7846_suspend, .resume = ads7846_resume, }; @@ -594,18 +592,20 @@ static int __init ads7846_init(void) // PXA: // also Dell Axim X50 // also HP iPaq H191x/H192x/H415x/H435x - // also Intel Lubbock (alternate to UCB1400) + // also Intel Lubbock (additional to UCB1400; as temperature sensor) // also Sharp Zaurus C7xx, C8xx (corgi/sheperd/husky) + // Atmel at91sam9261-EK uses ads7843 + // also various AMD Au1x00 devel boards - return driver_register(&ads7846_driver); + return spi_register_driver(&ads7846_driver); } module_init(ads7846_init); static void __exit ads7846_exit(void) { - driver_unregister(&ads7846_driver); + spi_unregister_driver(&ads7846_driver); #ifdef CONFIG_ARCH_OMAP if (machine_is_omap_osk()) { |