diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/hid/hid-asus.c | 28 | ||||
-rw-r--r-- | drivers/hid/hid-core.c | 174 | ||||
-rw-r--r-- | drivers/hid/hid-cougar.c | 2 | ||||
-rw-r--r-- | drivers/hid/hid-debug.c | 12 | ||||
-rw-r--r-- | drivers/hid/hid-ids.h | 3 | ||||
-rw-r--r-- | drivers/hid/hid-input.c | 108 | ||||
-rw-r--r-- | drivers/hid/hid-lenovo.c | 10 | ||||
-rw-r--r-- | drivers/hid/hid-logitech-hidpp.c | 375 | ||||
-rw-r--r-- | drivers/hid/hidraw.c | 8 | ||||
-rw-r--r-- | drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 | ||||
-rw-r--r-- | drivers/hid/intel-ish-hid/ishtp-hid.c | 2 |
11 files changed, 674 insertions, 56 deletions
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index a1fa2fc8c9b5..951bb17ae8b2 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -70,6 +70,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad"); #define QUIRK_T100_KEYBOARD BIT(6) #define QUIRK_T100CHI BIT(7) #define QUIRK_G752_KEYBOARD BIT(8) +#define QUIRK_T101HA_DOCK BIT(9) #define I2C_KEYBOARD_QUIRKS (QUIRK_FIX_NOTEBOOK_REPORT | \ QUIRK_NO_INIT_REPORTS | \ @@ -241,6 +242,18 @@ static int asus_report_input(struct asus_drvdata *drvdat, u8 *data, int size) return 1; } +static int asus_event(struct hid_device *hdev, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + if ((usage->hid & HID_USAGE_PAGE) == 0xff310000 && + (usage->hid & HID_USAGE) != 0x00 && !usage->type) { + hid_warn(hdev, "Unmapped Asus vendor usagepage code 0x%02x\n", + usage->hid & HID_USAGE); + } + + return 0; +} + static int asus_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) { @@ -510,6 +523,7 @@ static int asus_input_mapping(struct hid_device *hdev, case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP); break; case 0x35: asus_map_key_clear(KEY_DISPLAY_OFF); break; case 0x6c: asus_map_key_clear(KEY_SLEEP); break; + case 0x7c: asus_map_key_clear(KEY_MICMUTE); break; case 0x82: asus_map_key_clear(KEY_CAMERA); break; case 0x88: asus_map_key_clear(KEY_RFKILL); break; case 0xb5: asus_map_key_clear(KEY_CALC); break; @@ -528,6 +542,9 @@ static int asus_input_mapping(struct hid_device *hdev, /* Fn+Space Power4Gear Hybrid */ case 0x5c: asus_map_key_clear(KEY_PROG3); break; + /* Fn+F5 "fan" symbol on FX503VD */ + case 0x99: asus_map_key_clear(KEY_PROG4); break; + default: /* ASUS lazily declares 256 usages, ignore the rest, * as some make the keyboard appear as a pointer device. */ @@ -683,6 +700,11 @@ static int asus_probe(struct hid_device *hdev, const struct hid_device_id *id) return ret; } + /* use hid-multitouch for T101HA touchpad */ + if (id->driver_data & QUIRK_T101HA_DOCK && + hdev->collection->usage == HID_GD_MOUSE) + return -ENODEV; + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); if (ret) { hid_err(hdev, "Asus hw start failed: %d\n", ret); @@ -806,11 +828,16 @@ static const struct hid_device_id asus_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3), QUIRK_G752_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, + USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD), + QUIRK_USE_KBD_BACKLIGHT }, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD), QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_T100TAF_KEYBOARD), QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES }, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, + USB_DEVICE_ID_ASUSTEK_T101HA_KEYBOARD), QUIRK_T101HA_DOCK }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_ASUS_AK1D) }, { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_ASUS_MD_5110) }, { HID_USB_DEVICE(USB_VENDOR_ID_JESS, USB_DEVICE_ID_ASUS_MD_5112) }, @@ -832,6 +859,7 @@ static struct hid_driver asus_driver = { #ifdef CONFIG_PM .reset_resume = asus_reset_resume, #endif + .event = asus_event, .raw_event = asus_raw_event }; module_hid_driver(asus_driver); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5bec9244c45b..f41d5fe51abe 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -172,6 +172,8 @@ static int open_collection(struct hid_parser *parser, unsigned type) collection->type = type; collection->usage = usage; collection->level = parser->collection_stack_ptr - 1; + collection->parent = parser->active_collection; + parser->active_collection = collection; if (type == HID_COLLECTION_APPLICATION) parser->device->maxapplication++; @@ -190,6 +192,8 @@ static int close_collection(struct hid_parser *parser) return -EINVAL; } parser->collection_stack_ptr--; + if (parser->active_collection) + parser->active_collection = parser->active_collection->parent; return 0; } @@ -290,6 +294,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign field->usage[i].collection_index = parser->local.collection_index[j]; field->usage[i].usage_index = i; + field->usage[i].resolution_multiplier = 1; } field->maxusage = usages; @@ -943,6 +948,167 @@ struct hid_report *hid_validate_values(struct hid_device *hid, } EXPORT_SYMBOL_GPL(hid_validate_values); +static int hid_calculate_multiplier(struct hid_device *hid, + struct hid_field *multiplier) +{ + int m; + __s32 v = *multiplier->value; + __s32 lmin = multiplier->logical_minimum; + __s32 lmax = multiplier->logical_maximum; + __s32 pmin = multiplier->physical_minimum; + __s32 pmax = multiplier->physical_maximum; + + /* + * "Because OS implementations will generally divide the control's + * reported count by the Effective Resolution Multiplier, designers + * should take care not to establish a potential Effective + * Resolution Multiplier of zero." + * HID Usage Table, v1.12, Section 4.3.1, p31 + */ + if (lmax - lmin == 0) + return 1; + /* + * Handling the unit exponent is left as an exercise to whoever + * finds a device where that exponent is not 0. + */ + m = ((v - lmin)/(lmax - lmin) * (pmax - pmin) + pmin); + if (unlikely(multiplier->unit_exponent != 0)) { + hid_warn(hid, + "unsupported Resolution Multiplier unit exponent %d\n", + multiplier->unit_exponent); + } + + /* There are no devices with an effective multiplier > 255 */ + if (unlikely(m == 0 || m > 255 || m < -255)) { + hid_warn(hid, "unsupported Resolution Multiplier %d\n", m); + m = 1; + } + + return m; +} + +static void hid_apply_multiplier_to_field(struct hid_device *hid, + struct hid_field *field, + struct hid_collection *multiplier_collection, + int effective_multiplier) +{ + struct hid_collection *collection; + struct hid_usage *usage; + int i; + + /* + * If multiplier_collection is NULL, the multiplier applies + * to all fields in the report. + * Otherwise, it is the Logical Collection the multiplier applies to + * but our field may be in a subcollection of that collection. + */ + for (i = 0; i < field->maxusage; i++) { + usage = &field->usage[i]; + + collection = &hid->collection[usage->collection_index]; + while (collection && collection != multiplier_collection) + collection = collection->parent; + + if (collection || multiplier_collection == NULL) + usage->resolution_multiplier = effective_multiplier; + + } +} + +static void hid_apply_multiplier(struct hid_device *hid, + struct hid_field *multiplier) +{ + struct hid_report_enum *rep_enum; + struct hid_report *rep; + struct hid_field *field; + struct hid_collection *multiplier_collection; + int effective_multiplier; + int i; + + /* + * "The Resolution Multiplier control must be contained in the same + * Logical Collection as the control(s) to which it is to be applied. + * If no Resolution Multiplier is defined, then the Resolution + * Multiplier defaults to 1. If more than one control exists in a + * Logical Collection, the Resolution Multiplier is associated with + * all controls in the collection. If no Logical Collection is + * defined, the Resolution Multiplier is associated with all + * controls in the report." + * HID Usage Table, v1.12, Section 4.3.1, p30 + * + * Thus, search from the current collection upwards until we find a + * logical collection. Then search all fields for that same parent + * collection. Those are the fields the multiplier applies to. + * + * If we have more than one multiplier, it will overwrite the + * applicable fields later. + */ + multiplier_collection = &hid->collection[multiplier->usage->collection_index]; + while (multiplier_collection && + multiplier_collection->type != HID_COLLECTION_LOGICAL) + multiplier_collection = multiplier_collection->parent; + + effective_multiplier = hid_calculate_multiplier(hid, multiplier); + + rep_enum = &hid->report_enum[HID_INPUT_REPORT]; + list_for_each_entry(rep, &rep_enum->report_list, list) { + for (i = 0; i < rep->maxfield; i++) { + field = rep->field[i]; + hid_apply_multiplier_to_field(hid, field, + multiplier_collection, + effective_multiplier); + } + } +} + +/* + * hid_setup_resolution_multiplier - set up all resolution multipliers + * + * @device: hid device + * + * Search for all Resolution Multiplier Feature Reports and apply their + * value to all matching Input items. This only updates the internal struct + * fields. + * + * The Resolution Multiplier is applied by the hardware. If the multiplier + * is anything other than 1, the hardware will send pre-multiplied events + * so that the same physical interaction generates an accumulated + * accumulated_value = value * * multiplier + * This may be achieved by sending + * - "value * multiplier" for each event, or + * - "value" but "multiplier" times as frequently, or + * - a combination of the above + * The only guarantee is that the same physical interaction always generates + * an accumulated 'value * multiplier'. + * + * This function must be called before any event processing and after + * any SetRequest to the Resolution Multiplier. + */ +void hid_setup_resolution_multiplier(struct hid_device *hid) +{ + struct hid_report_enum *rep_enum; + struct hid_report *rep; + struct hid_usage *usage; + int i, j; + + rep_enum = &hid->report_enum[HID_FEATURE_REPORT]; + list_for_each_entry(rep, &rep_enum->report_list, list) { + for (i = 0; i < rep->maxfield; i++) { + /* Ignore if report count is out of bounds. */ + if (rep->field[i]->report_count < 1) + continue; + + for (j = 0; j < rep->field[i]->maxusage; j++) { + usage = &rep->field[i]->usage[j]; + if (usage->hid == HID_GD_RESOLUTION_MULTIPLIER) + hid_apply_multiplier(hid, + rep->field[i]); + } + } + } +} +EXPORT_SYMBOL_GPL(hid_setup_resolution_multiplier); + /** * hid_open_report - open a driver-specific device report * @@ -1039,9 +1205,17 @@ int hid_open_report(struct hid_device *device) hid_err(device, "unbalanced delimiter at end of report description\n"); goto err; } + + /* + * fetch initial values in case the device's + * default multiplier isn't the recommended 1 + */ + hid_setup_resolution_multiplier(device); + kfree(parser->collection_stack); vfree(parser); device->status |= HID_STAT_PARSED; + return 0; } } diff --git a/drivers/hid/hid-cougar.c b/drivers/hid/hid-cougar.c index 3f0916b64c60..e0bb7b34f3a4 100644 --- a/drivers/hid/hid-cougar.c +++ b/drivers/hid/hid-cougar.c @@ -326,6 +326,8 @@ module_param_cb(g6_is_space, &cougar_g6_is_space_ops, &g6_is_space, 0644); static struct hid_device_id cougar_id_table[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SOLID_YEAR, USB_DEVICE_ID_COUGAR_500K_GAMING_KEYBOARD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOLID_YEAR, + USB_DEVICE_ID_COUGAR_700K_GAMING_KEYBOARD) }, {} }; MODULE_DEVICE_TABLE(hid, cougar_id_table); diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index b48100236df8..c530476edba6 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -1072,11 +1072,6 @@ static int hid_debug_rdesc_show(struct seq_file *f, void *p) return 0; } -static int hid_debug_rdesc_open(struct inode *inode, struct file *file) -{ - return single_open(file, hid_debug_rdesc_show, inode->i_private); -} - static int hid_debug_events_open(struct inode *inode, struct file *file) { int err = 0; @@ -1211,12 +1206,7 @@ static int hid_debug_events_release(struct inode *inode, struct file *file) return 0; } -static const struct file_operations hid_debug_rdesc_fops = { - .open = hid_debug_rdesc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(hid_debug_rdesc); static const struct file_operations hid_debug_events_fops = { .owner = THIS_MODULE, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 27519eb8ee63..518fa76414f5 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -187,12 +187,14 @@ #define USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD 0x17e0 #define USB_DEVICE_ID_ASUSTEK_T100TAF_KEYBOARD 0x1807 #define USB_DEVICE_ID_ASUSTEK_T100CHI_KEYBOARD 0x8502 +#define USB_DEVICE_ID_ASUSTEK_T101HA_KEYBOARD 0x183d #define USB_DEVICE_ID_ASUSTEK_T304_KEYBOARD 0x184a #define USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD 0x8585 #define USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD 0x0101 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822 +#define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD 0x1869 #define USB_VENDOR_ID_ATEN 0x0557 #define USB_DEVICE_ID_ATEN_UC100KM 0x2004 @@ -1025,6 +1027,7 @@ #define USB_VENDOR_ID_SOLID_YEAR 0x060b #define USB_DEVICE_ID_COUGAR_500K_GAMING_KEYBOARD 0x500a +#define USB_DEVICE_ID_COUGAR_700K_GAMING_KEYBOARD 0x700a #define USB_VENDOR_ID_SOUNDGRAPH 0x15c2 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST 0x0034 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index d6fab5798487..59a5608b8dc0 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -712,7 +712,15 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel map_abs_clear(usage->hid & 0xf); break; - case HID_GD_SLIDER: case HID_GD_DIAL: case HID_GD_WHEEL: + case HID_GD_WHEEL: + if (field->flags & HID_MAIN_ITEM_RELATIVE) { + set_bit(REL_WHEEL, input->relbit); + map_rel(REL_WHEEL_HI_RES); + } else { + map_abs(usage->hid & 0xf); + } + break; + case HID_GD_SLIDER: case HID_GD_DIAL: if (field->flags & HID_MAIN_ITEM_RELATIVE) map_rel(usage->hid & 0xf); else @@ -1012,7 +1020,10 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel case 0x22f: map_key_clear(KEY_ZOOMRESET); break; case 0x233: map_key_clear(KEY_SCROLLUP); break; case 0x234: map_key_clear(KEY_SCROLLDOWN); break; - case 0x238: map_rel(REL_HWHEEL); break; + case 0x238: /* AC Pan */ + set_bit(REL_HWHEEL, input->relbit); + map_rel(REL_HWHEEL_HI_RES); + break; case 0x23d: map_key_clear(KEY_EDIT); break; case 0x25f: map_key_clear(KEY_CANCEL); break; case 0x269: map_key_clear(KEY_INSERT); break; @@ -1200,6 +1211,38 @@ ignore: } +static void hidinput_handle_scroll(struct hid_usage *usage, + struct input_dev *input, + __s32 value) +{ + int code; + int hi_res, lo_res; + + if (value == 0) + return; + + if (usage->code == REL_WHEEL_HI_RES) + code = REL_WHEEL; + else + code = REL_HWHEEL; + + /* + * Windows reports one wheel click as value 120. Where a high-res + * scroll wheel is present, a fraction of 120 is reported instead. + * Our REL_WHEEL_HI_RES axis does the same because all HW must + * adhere to the 120 expectation. + */ + hi_res = value * 120/usage->resolution_multiplier; + + usage->wheel_accumulated += hi_res; + lo_res = usage->wheel_accumulated/120; + if (lo_res) + usage->wheel_accumulated -= lo_res * 120; + + input_event(input, EV_REL, code, lo_res); + input_event(input, EV_REL, usage->code, hi_res); +} + void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value) { struct input_dev *input; @@ -1262,6 +1305,12 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct if ((usage->type == EV_KEY) && (usage->code == 0)) /* Key 0 is "unassigned", not KEY_UNKNOWN */ return; + if ((usage->type == EV_REL) && (usage->code == REL_WHEEL_HI_RES || + usage->code == REL_HWHEEL_HI_RES)) { + hidinput_handle_scroll(usage, input, value); + return; + } + if ((usage->type == EV_ABS) && (field->flags & HID_MAIN_ITEM_RELATIVE) && (usage->code == ABS_VOLUME)) { int count = abs(value); @@ -1489,6 +1538,58 @@ static void hidinput_close(struct input_dev *dev) hid_hw_close(hid); } +static void hidinput_change_resolution_multipliers(struct hid_device *hid) +{ + struct hid_report_enum *rep_enum; + struct hid_report *rep; + struct hid_usage *usage; + int i, j; + + rep_enum = &hid->report_enum[HID_FEATURE_REPORT]; + list_for_each_entry(rep, &rep_enum->report_list, list) { + bool update_needed = false; + + if (rep->maxfield == 0) + continue; + + /* + * If we have more than one feature within this report we + * need to fill in the bits from the others before we can + * overwrite the ones for the Resolution Multiplier. + */ + if (rep->maxfield > 1) { + hid_hw_request(hid, rep, HID_REQ_GET_REPORT); + hid_hw_wait(hid); + } + + for (i = 0; i < rep->maxfield; i++) { + __s32 logical_max = rep->field[i]->logical_maximum; + + /* There is no good reason for a Resolution + * Multiplier to have a count other than 1. + * Ignore that case. + */ + if (rep->field[i]->report_count != 1) + continue; + + for (j = 0; j < rep->field[i]->maxusage; j++) { + usage = &rep->field[i]->usage[j]; + + if (usage->hid != HID_GD_RESOLUTION_MULTIPLIER) + continue; + + *rep->field[i]->value = logical_max; + update_needed = true; + } + } + if (update_needed) + hid_hw_request(hid, rep, HID_REQ_SET_REPORT); + } + + /* refresh our structs */ + hid_setup_resolution_multiplier(hid); +} + static void report_features(struct hid_device *hid) { struct hid_driver *drv = hid->driver; @@ -1782,6 +1883,8 @@ int hidinput_connect(struct hid_device *hid, unsigned int force) } } + hidinput_change_resolution_multipliers(hid); + list_for_each_entry_safe(hidinput, next, &hid->inputs, list) { if (drv->input_configured && drv->input_configured(hid, hidinput)) @@ -1840,4 +1943,3 @@ void hidinput_disconnect(struct hid_device *hid) cancel_work_sync(&hid->led_work); } EXPORT_SYMBOL_GPL(hidinput_disconnect); - diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c index 643b6eb54442..eacc76d2ab96 100644 --- a/drivers/hid/hid-lenovo.c +++ b/drivers/hid/hid-lenovo.c @@ -743,7 +743,9 @@ static int lenovo_probe_tpkbd(struct hid_device *hdev) data_pointer->led_mute.brightness_get = lenovo_led_brightness_get_tpkbd; data_pointer->led_mute.brightness_set = lenovo_led_brightness_set_tpkbd; data_pointer->led_mute.dev = dev; - led_classdev_register(dev, &data_pointer->led_mute); + ret = led_classdev_register(dev, &data_pointer->led_mute); + if (ret < 0) + goto err; data_pointer->led_micmute.name = name_micmute; data_pointer->led_micmute.brightness_get = @@ -751,7 +753,11 @@ static int lenovo_probe_tpkbd(struct hid_device *hdev) data_pointer->led_micmute.brightness_set = lenovo_led_brightness_set_tpkbd; data_pointer->led_micmute.dev = dev; - led_classdev_register(dev, &data_pointer->led_micmute); + ret = led_classdev_register(dev, &data_pointer->led_micmute); + if (ret < 0) { + led_classdev_unregister(&data_pointer->led_mute); + goto err; + } lenovo_features_set_tpkbd(hdev); diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 19cc980eebce..15ed6177a7a3 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/sched.h> +#include <linux/sched/clock.h> #include <linux/kfifo.h> #include <linux/input/mt.h> #include <linux/workqueue.h> @@ -64,6 +65,14 @@ MODULE_PARM_DESC(disable_tap_to_click, #define HIDPP_QUIRK_NO_HIDINPUT BIT(23) #define HIDPP_QUIRK_FORCE_OUTPUT_REPORTS BIT(24) #define HIDPP_QUIRK_UNIFYING BIT(25) +#define HIDPP_QUIRK_HI_RES_SCROLL_1P0 BIT(26) +#define HIDPP_QUIRK_HI_RES_SCROLL_X2120 BIT(27) +#define HIDPP_QUIRK_HI_RES_SCROLL_X2121 BIT(28) + +/* Convenience constant to check for any high-res support. */ +#define HIDPP_QUIRK_HI_RES_SCROLL (HIDPP_QUIRK_HI_RES_SCROLL_1P0 | \ + HIDPP_QUIRK_HI_RES_SCROLL_X2120 | \ + HIDPP_QUIRK_HI_RES_SCROLL_X2121) #define HIDPP_QUIRK_DELAYED_INIT HIDPP_QUIRK_NO_HIDINPUT @@ -128,6 +137,25 @@ struct hidpp_battery { bool online; }; +/** + * struct hidpp_scroll_counter - Utility class for processing high-resolution + * scroll events. + * @dev: the input device for which events should be reported. + * @wheel_multiplier: the scalar multiplier to be applied to each wheel event + * @remainder: counts the number of high-resolution units moved since the last + * low-resolution event (REL_WHEEL or REL_HWHEEL) was sent. Should + * only be used by class methods. + * @direction: direction of last movement (1 or -1) + * @last_time: last event time, used to reset remainder after inactivity + */ +struct hidpp_scroll_counter { + struct input_dev *dev; + int wheel_multiplier; + int remainder; + int direction; + unsigned long long last_time; +}; + struct hidpp_device { struct hid_device *hid_dev; struct mutex send_mutex; @@ -149,6 +177,7 @@ struct hidpp_device { unsigned long capabilities; struct hidpp_battery battery; + struct hidpp_scroll_counter vertical_wheel_counter; }; /* HID++ 1.0 error codes */ @@ -391,6 +420,67 @@ static void hidpp_prefix_name(char **name, int name_length) *name = new_name; } +/** + * hidpp_scroll_counter_handle_scroll() - Send high- and low-resolution scroll + * events given a high-resolution wheel + * movement. + * @counter: a hid_scroll_counter struct describing the wheel. + * @hi_res_value: the movement of the wheel, in the mouse's high-resolution + * units. + * + * Given a high-resolution movement, this function converts the movement into + * fractions of 120 and emits high-resolution scroll events for the input + * device. It also uses the multiplier from &struct hid_scroll_counter to + * emit low-resolution scroll events when appropriate for + * backwards-compatibility with userspace input libraries. + */ +static void hidpp_scroll_counter_handle_scroll(struct hidpp_scroll_counter *counter, + int hi_res_value) +{ + int low_res_value, remainder, direction; + unsigned long long now, previous; + + hi_res_value = hi_res_value * 120/counter->wheel_multiplier; + input_report_rel(counter->dev, REL_WHEEL_HI_RES, hi_res_value); + + remainder = counter->remainder; + direction = hi_res_value > 0 ? 1 : -1; + + now = sched_clock(); + previous = counter->last_time; + counter->last_time = now; + /* + * Reset the remainder after a period of inactivity or when the + * direction changes. This prevents the REL_WHEEL emulation point + * from sliding for devices that don't always provide the same + * number of movements per detent. + */ + if (now - previous > 1000000000 || direction != counter->direction) + remainder = 0; + + counter->direction = direction; + remainder += hi_res_value; + + /* Some wheels will rest 7/8ths of a detent from the previous detent + * after slow movement, so we want the threshold for low-res events to + * be in the middle between two detents (e.g. after 4/8ths) as + * opposed to on the detents themselves (8/8ths). + */ + if (abs(remainder) >= 60) { + /* Add (or subtract) 1 because we want to trigger when the wheel + * is half-way to the next detent (i.e. scroll 1 detent after a + * 1/2 detent movement, 2 detents after a 1 1/2 detent movement, + * etc.). + */ + low_res_value = remainder / 120; + if (low_res_value == 0) + low_res_value = (hi_res_value > 0 ? 1 : -1); + input_report_rel(counter->dev, REL_WHEEL, low_res_value); + remainder -= low_res_value * 120; + } + counter->remainder = remainder; +} + /* -------------------------------------------------------------------------- */ /* HIDP++ 1.0 commands */ /* -------------------------------------------------------------------------- */ @@ -400,32 +490,53 @@ static void hidpp_prefix_name(char **name, int name_length) #define HIDPP_SET_LONG_REGISTER 0x82 #define HIDPP_GET_LONG_REGISTER 0x83 -#define HIDPP_REG_GENERAL 0x00 - -static int hidpp10_enable_battery_reporting(struct hidpp_device *hidpp_dev) +/** + * hidpp10_set_register_bit() - Sets a single bit in a HID++ 1.0 register. + * @hidpp_dev: the device to set the register on. + * @register_address: the address of the register to modify. + * @byte: the byte of the register to modify. Should be less than 3. + * Return: 0 if successful, otherwise a negative error code. + */ +static int hidpp10_set_register_bit(struct hidpp_device *hidpp_dev, + u8 register_address, u8 byte, u8 bit) { struct hidpp_report response; int ret; u8 params[3] = { 0 }; ret = hidpp_send_rap_command_sync(hidpp_dev, - REPORT_ID_HIDPP_SHORT, - HIDPP_GET_REGISTER, - HIDPP_REG_GENERAL, - NULL, 0, &response); + REPORT_ID_HIDPP_SHORT, + HIDPP_GET_REGISTER, + register_address, + NULL, 0, &response); if (ret) return ret; memcpy(params, response.rap.params, 3); - /* Set the battery bit */ - params[0] |= BIT(4); + params[byte] |= BIT(bit); return hidpp_send_rap_command_sync(hidpp_dev, - REPORT_ID_HIDPP_SHORT, - HIDPP_SET_REGISTER, - HIDPP_REG_GENERAL, - params, 3, &response); + REPORT_ID_HIDPP_SHORT, + HIDPP_SET_REGISTER, + register_address, + params, 3, &response); +} + + +#define HIDPP_REG_GENERAL 0x00 + +static int hidpp10_enable_battery_reporting(struct hidpp_device *hidpp_dev) +{ + return hidpp10_set_register_bit(hidpp_dev, HIDPP_REG_GENERAL, 0, 4); +} + +#define HIDPP_REG_FEATURES 0x01 + +/* On HID++ 1.0 devices, high-res scroll was called "scrolling acceleration". */ +static int hidpp10_enable_scrolling_acceleration(struct hidpp_device *hidpp_dev) +{ + return hidpp10_set_register_bit(hidpp_dev, HIDPP_REG_FEATURES, 0, 6); } #define HIDPP_REG_BATTERY_STATUS 0x07 @@ -1137,6 +1248,99 @@ static int hidpp_battery_get_property(struct power_supply *psy, } /* -------------------------------------------------------------------------- */ +/* 0x2120: Hi-resolution scrolling */ +/* -------------------------------------------------------------------------- */ + +#define HIDPP_PAGE_HI_RESOLUTION_SCROLLING 0x2120 + +#define CMD_HI_RESOLUTION_SCROLLING_SET_HIGHRES_SCROLLING_MODE 0x10 + +static int hidpp_hrs_set_highres_scrolling_mode(struct hidpp_device *hidpp, + bool enabled, u8 *multiplier) +{ + u8 feature_index; + u8 feature_type; + int ret; + u8 params[1]; + struct hidpp_report response; + + ret = hidpp_root_get_feature(hidpp, + HIDPP_PAGE_HI_RESOLUTION_SCROLLING, + &feature_index, + &feature_type); + if (ret) + return ret; + + params[0] = enabled ? BIT(0) : 0; + ret = hidpp_send_fap_command_sync(hidpp, feature_index, + CMD_HI_RESOLUTION_SCROLLING_SET_HIGHRES_SCROLLING_MODE, + params, sizeof(params), &response); + if (ret) + return ret; + *multiplier = response.fap.params[1]; + return 0; +} + +/* -------------------------------------------------------------------------- */ +/* 0x2121: HiRes Wheel */ +/* -------------------------------------------------------------------------- */ + +#define HIDPP_PAGE_HIRES_WHEEL 0x2121 + +#define CMD_HIRES_WHEEL_GET_WHEEL_CAPABILITY 0x00 +#define CMD_HIRES_WHEEL_SET_WHEEL_MODE 0x20 + +static int hidpp_hrw_get_wheel_capability(struct hidpp_device *hidpp, + u8 *multiplier) +{ + u8 feature_index; + u8 feature_type; + int ret; + struct hidpp_report response; + + ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_HIRES_WHEEL, + &feature_index, &feature_type); + if (ret) + goto return_default; + + ret = hidpp_send_fap_command_sync(hidpp, feature_index, + CMD_HIRES_WHEEL_GET_WHEEL_CAPABILITY, + NULL, 0, &response); + if (ret) + goto return_default; + + *multiplier = response.fap.params[0]; + return 0; +return_default: + hid_warn(hidpp->hid_dev, + "Couldn't get wheel multiplier (error %d)\n", ret); + return ret; +} + +static int hidpp_hrw_set_wheel_mode(struct hidpp_device *hidpp, bool invert, + bool high_resolution, bool use_hidpp) +{ + u8 feature_index; + u8 feature_type; + int ret; + u8 params[1]; + struct hidpp_report response; + + ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_HIRES_WHEEL, + &feature_index, &feature_type); + if (ret) + return ret; + + params[0] = (invert ? BIT(2) : 0) | + (high_resolution ? BIT(1) : 0) | + (use_hidpp ? BIT(0) : 0); + + return hidpp_send_fap_command_sync(hidpp, feature_index, + CMD_HIRES_WHEEL_SET_WHEEL_MODE, + params, sizeof(params), &response); +} + +/* -------------------------------------------------------------------------- */ /* 0x4301: Solar Keyboard */ /* -------------------------------------------------------------------------- */ @@ -1465,7 +1669,7 @@ struct hidpp_ff_work_data { u8 size; }; -static const signed short hiddpp_ff_effects[] = { +static const signed short hidpp_ff_effects[] = { FF_CONSTANT, FF_PERIODIC, FF_SINE, @@ -1480,7 +1684,7 @@ static const signed short hiddpp_ff_effects[] = { -1 }; -static const signed short hiddpp_ff_effects_v2[] = { +static const signed short hidpp_ff_effects_v2[] = { FF_RAMP, FF_FRICTION, FF_INERTIA, @@ -1873,11 +2077,11 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index) version = bcdDevice & 255; /* Set supported force feedback capabilities */ - for (j = 0; hiddpp_ff_effects[j] >= 0; j++) - set_bit(hiddpp_ff_effects[j], dev->ffbit); + for (j = 0; hidpp_ff_effects[j] >= 0; j++) + set_bit(hidpp_ff_effects[j], dev->ffbit); if (version > 1) - for (j = 0; hiddpp_ff_effects_v2[j] >= 0; j++) - set_bit(hiddpp_ff_effects_v2[j], dev->ffbit); + for (j = 0; hidpp_ff_effects_v2[j] >= 0; j++) + set_bit(hidpp_ff_effects_v2[j], dev->ffbit); /* Read number of slots available in device */ error = hidpp_send_fap_command_sync(hidpp, feature_index, @@ -2387,10 +2591,15 @@ static int m560_raw_event(struct hid_device *hdev, u8 *data, int size) input_report_key(mydata->input, BTN_RIGHT, !!(data[1] & M560_MOUSE_BTN_RIGHT)); - if (data[1] & M560_MOUSE_BTN_WHEEL_LEFT) + if (data[1] & M560_MOUSE_BTN_WHEEL_LEFT) { input_report_rel(mydata->input, REL_HWHEEL, -1); - else if (data[1] & M560_MOUSE_BTN_WHEEL_RIGHT) + input_report_rel(mydata->input, REL_HWHEEL_HI_RES, + -120); + } else if (data[1] & M560_MOUSE_BTN_WHEEL_RIGHT) { input_report_rel(mydata->input, REL_HWHEEL, 1); + input_report_rel(mydata->input, REL_HWHEEL_HI_RES, + 120); + } v = hid_snto32(hid_field_extract(hdev, data+3, 0, 12), 12); input_report_rel(mydata->input, REL_X, v); @@ -2399,7 +2608,8 @@ static int m560_raw_event(struct hid_device *hdev, u8 *data, int size) input_report_rel(mydata->input, REL_Y, v); v = hid_snto32(data[6], 8); - input_report_rel(mydata->input, REL_WHEEL, v); + hidpp_scroll_counter_handle_scroll( + &hidpp->vertical_wheel_counter, v); input_sync(mydata->input); } @@ -2426,6 +2636,8 @@ static void m560_populate_input(struct hidpp_device *hidpp, __set_bit(REL_Y, mydata->input->relbit); __set_bit(REL_WHEEL, mydata->input->relbit); __set_bit(REL_HWHEEL, mydata->input->relbit); + __set_bit(REL_WHEEL_HI_RES, mydata->input->relbit); + __set_bit(REL_HWHEEL_HI_RES, mydata->input->relbit); } static int m560_input_mapping(struct hid_device *hdev, struct hid_input *hi, @@ -2528,6 +2740,37 @@ static int g920_get_config(struct hidpp_device *hidpp) } /* -------------------------------------------------------------------------- */ +/* High-resolution scroll wheels */ +/* -------------------------------------------------------------------------- */ + +static int hi_res_scroll_enable(struct hidpp_device *hidpp) +{ + int ret; + u8 multiplier = 1; + + if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2121) { + ret = hidpp_hrw_set_wheel_mode(hidpp, false, true, false); + if (ret == 0) + ret = hidpp_hrw_get_wheel_capability(hidpp, &multiplier); + } else if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2120) { + ret = hidpp_hrs_set_highres_scrolling_mode(hidpp, true, + &multiplier); + } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ { + ret = hidpp10_enable_scrolling_acceleration(hidpp); + multiplier = 8; + } + if (ret) + return ret; + + if (multiplier == 0) + multiplier = 1; + + hidpp->vertical_wheel_counter.wheel_multiplier = multiplier; + hid_info(hidpp->hid_dev, "multiplier = %d\n", multiplier); + return 0; +} + +/* -------------------------------------------------------------------------- */ /* Generic HID++ devices */ /* -------------------------------------------------------------------------- */ @@ -2572,6 +2815,9 @@ static void hidpp_populate_input(struct hidpp_device *hidpp, wtp_populate_input(hidpp, input, origin_is_hid_core); else if (hidpp->quirks & HIDPP_QUIRK_CLASS_M560) m560_populate_input(hidpp, input, origin_is_hid_core); + + if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) + hidpp->vertical_wheel_counter.dev = input; } static int hidpp_input_configured(struct hid_device *hdev, @@ -2690,6 +2936,27 @@ static int hidpp_raw_event(struct hid_device *hdev, struct hid_report *report, return 0; } +static int hidpp_event(struct hid_device *hdev, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + /* This function will only be called for scroll events, due to the + * restriction imposed in hidpp_usages. + */ + struct hidpp_device *hidpp = hid_get_drvdata(hdev); + struct hidpp_scroll_counter *counter = &hidpp->vertical_wheel_counter; + /* A scroll event may occur before the multiplier has been retrieved or + * the input device set, or high-res scroll enabling may fail. In such + * cases we must return early (falling back to default behaviour) to + * avoid a crash in hidpp_scroll_counter_handle_scroll. + */ + if (!(hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) || value == 0 + || counter->dev == NULL || counter->wheel_multiplier == 0) + return 0; + + hidpp_scroll_counter_handle_scroll(counter, value); + return 1; +} + static int hidpp_initialize_battery(struct hidpp_device *hidpp) { static atomic_t battery_no = ATOMIC_INIT(0); @@ -2901,6 +3168,9 @@ static void hidpp_connect_event(struct hidpp_device *hidpp) if (hidpp->battery.ps) power_supply_changed(hidpp->battery.ps); + if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) + hi_res_scroll_enable(hidpp); + if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT) || hidpp->delayed_input) /* if the input nodes are already created, we can stop now */ return; @@ -3086,35 +3356,63 @@ static void hidpp_remove(struct hid_device *hdev) mutex_destroy(&hidpp->send_mutex); } +#define LDJ_DEVICE(product) \ + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, \ + USB_VENDOR_ID_LOGITECH, (product)) + static const struct hid_device_id hidpp_devices[] = { { /* wireless touchpad */ - HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, - USB_VENDOR_ID_LOGITECH, 0x4011), + LDJ_DEVICE(0x4011), .driver_data = HIDPP_QUIRK_CLASS_WTP | HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS }, { /* wireless touchpad T650 */ - HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, - USB_VENDOR_ID_LOGITECH, 0x4101), + LDJ_DEVICE(0x4101), .driver_data = HIDPP_QUIRK_CLASS_WTP | HIDPP_QUIRK_DELAYED_INIT }, { /* wireless touchpad T651 */ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_T651), .driver_data = HIDPP_QUIRK_CLASS_WTP }, + { /* Mouse Logitech Anywhere MX */ + LDJ_DEVICE(0x1017), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, + { /* Mouse Logitech Cube */ + LDJ_DEVICE(0x4010), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2120 }, + { /* Mouse Logitech M335 */ + LDJ_DEVICE(0x4050), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { /* Mouse Logitech M515 */ + LDJ_DEVICE(0x4007), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2120 }, { /* Mouse logitech M560 */ - HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, - USB_VENDOR_ID_LOGITECH, 0x402d), - .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 }, + LDJ_DEVICE(0x402d), + .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 + | HIDPP_QUIRK_HI_RES_SCROLL_X2120 }, + { /* Mouse Logitech M705 (firmware RQM17) */ + LDJ_DEVICE(0x101b), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, + { /* Mouse Logitech M705 (firmware RQM67) */ + LDJ_DEVICE(0x406d), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { /* Mouse Logitech M720 */ + LDJ_DEVICE(0x405e), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { /* Mouse Logitech MX Anywhere 2 */ + LDJ_DEVICE(0x404a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { LDJ_DEVICE(0xb013), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { LDJ_DEVICE(0xb018), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { LDJ_DEVICE(0xb01f), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { /* Mouse Logitech MX Anywhere 2S */ + LDJ_DEVICE(0x406a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { /* Mouse Logitech MX Master */ + LDJ_DEVICE(0x4041), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { LDJ_DEVICE(0x4060), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { LDJ_DEVICE(0x4071), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { /* Mouse Logitech MX Master 2S */ + LDJ_DEVICE(0x4069), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, + { /* Mouse Logitech Performance MX */ + LDJ_DEVICE(0x101a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, { /* Keyboard logitech K400 */ - HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, - USB_VENDOR_ID_LOGITECH, 0x4024), + LDJ_DEVICE(0x4024), .driver_data = HIDPP_QUIRK_CLASS_K400 }, { /* Solar Keyboard Logitech K750 */ - HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, - USB_VENDOR_ID_LOGITECH, 0x4002), + LDJ_DEVICE(0x4002), .driver_data = HIDPP_QUIRK_CLASS_K750 }, - { HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, - USB_VENDOR_ID_LOGITECH, HID_ANY_ID)}, + { LDJ_DEVICE(HID_ANY_ID) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL), .driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS}, @@ -3123,12 +3421,19 @@ static const struct hid_device_id hidpp_devices[] = { MODULE_DEVICE_TABLE(hid, hidpp_devices); +static const struct hid_usage_id hidpp_usages[] = { + { HID_GD_WHEEL, EV_REL, REL_WHEEL_HI_RES }, + { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} +}; + static struct hid_driver hidpp_driver = { .name = "logitech-hidpp-device", .id_table = hidpp_devices, .probe = hidpp_probe, .remove = hidpp_remove, .raw_event = hidpp_raw_event, + .usage_table = hidpp_usages, + .event = hidpp_event, .input_configured = hidpp_input_configured, .input_mapping = hidpp_input_mapping, .input_mapped = hidpp_input_mapped, diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 4a44e48e08b2..9fc51eff1079 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -107,8 +107,6 @@ out: /* * The first byte of the report buffer is expected to be a report number. - * - * This function is to be called with the minors_lock mutex held. */ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer, size_t count, unsigned char report_type) { @@ -117,6 +115,8 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer, __u8 *buf; int ret = 0; + lockdep_assert_held(&minors_lock); + if (!hidraw_table[minor] || !hidraw_table[minor]->exist) { ret = -ENODEV; goto out; @@ -181,8 +181,6 @@ static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t * of buffer is the report number to request, or 0x0 if the defice does not * use numbered reports. The report_type parameter can be HID_FEATURE_REPORT * or HID_INPUT_REPORT. - * - * This function is to be called with the minors_lock mutex held. */ static ssize_t hidraw_get_report(struct file *file, char __user *buffer, size_t count, unsigned char report_type) { @@ -192,6 +190,8 @@ static ssize_t hidraw_get_report(struct file *file, char __user *buffer, size_t int ret = 0, len; unsigned char report_number; + lockdep_assert_held(&minors_lock); + if (!hidraw_table[minor] || !hidraw_table[minor]->exist) { ret = -ENODEV; goto out; diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c index 89f2976f9c53..fd1b6eea6d2f 100644 --- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -346,6 +346,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = { }, .driver_data = (void *)&sipodev_desc }, + { + .ident = "Odys Winbook 13", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AXDIA International GmbH"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "WINBOOK 13"), + }, + .driver_data = (void *)&sipodev_desc + }, { } /* Terminate list */ }; diff --git a/drivers/hid/intel-ish-hid/ishtp-hid.c b/drivers/hid/intel-ish-hid/ishtp-hid.c index cd23903ddcf1..e918d78e541c 100644 --- a/drivers/hid/intel-ish-hid/ishtp-hid.c +++ b/drivers/hid/intel-ish-hid/ishtp-hid.c @@ -222,7 +222,7 @@ int ishtp_hid_probe(unsigned int cur_hid_dev, err_hid_device: kfree(hid_data); err_hid_data: - kfree(hid); + hid_destroy_device(hid); return rv; } |