diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/devfreq/Kconfig | 36 | ||||
| -rw-r--r-- | drivers/devfreq/Makefile | 4 | ||||
| -rw-r--r-- | drivers/devfreq/devfreq-event.c | 5 | ||||
| -rw-r--r-- | drivers/devfreq/devfreq.c | 207 | ||||
| -rw-r--r-- | drivers/devfreq/event/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/devfreq/event/Makefile | 2 | ||||
| -rw-r--r-- | drivers/devfreq/event/exynos-nocp.c | 304 | ||||
| -rw-r--r-- | drivers/devfreq/event/exynos-nocp.h | 78 | ||||
| -rw-r--r-- | drivers/devfreq/exynos-bus.c | 570 | ||||
| -rw-r--r-- | drivers/devfreq/exynos/Makefile | 3 | ||||
| -rw-r--r-- | drivers/devfreq/exynos/exynos4_bus.c | 1055 | ||||
| -rw-r--r-- | drivers/devfreq/exynos/exynos4_bus.h | 110 | ||||
| -rw-r--r-- | drivers/devfreq/exynos/exynos5_bus.c | 431 | ||||
| -rw-r--r-- | drivers/devfreq/exynos/exynos_ppmu.c | 119 | ||||
| -rw-r--r-- | drivers/devfreq/exynos/exynos_ppmu.h | 86 | ||||
| -rw-r--r-- | drivers/devfreq/governor_passive.c | 205 |
16 files changed, 1399 insertions, 1824 deletions
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 4de78c552251..78dac0e9da11 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -64,30 +64,32 @@ config DEVFREQ_GOV_USERSPACE Otherwise, the governor does not change the frequency given at the initialization. +config DEVFREQ_GOV_PASSIVE + tristate "Passive" + help + Sets the frequency based on the frequency of its parent devfreq + device. This governor does not change the frequency by itself + through sysfs entries. The passive governor recommends that + devfreq device uses the OPP table to get the frequency/voltage. + comment "DEVFREQ Drivers" -config ARM_EXYNOS4_BUS_DEVFREQ - bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" - depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM +config ARM_EXYNOS_BUS_DEVFREQ + bool "ARM EXYNOS Generic Memory Bus DEVFREQ Driver" + depends on ARCH_EXYNOS select DEVFREQ_GOV_SIMPLE_ONDEMAND + select DEVFREQ_GOV_PASSIVE + select DEVFREQ_EVENT_EXYNOS_PPMU + select PM_DEVFREQ_EVENT select PM_OPP help - This adds the DEVFREQ driver for Exynos4210 memory bus (vdd_int) - and Exynos4212/4412 memory interface and bus (vdd_mif + vdd_int). - It reads PPMU counters of memory controllers and adjusts - the operating frequencies and voltages with OPP support. + This adds the common DEVFREQ driver for Exynos Memory bus. Exynos + Memory bus has one more group of memory bus (e.g, MIF and INT block). + Each memory bus group could contain many memoby bus block. It reads + PPMU counters of memory controllers by using DEVFREQ-event device + and adjusts the operating frequencies and voltages with OPP support. This does not yet operate with optimal voltages. -config ARM_EXYNOS5_BUS_DEVFREQ - tristate "ARM Exynos5250 Bus DEVFREQ Driver" - depends on SOC_EXYNOS5250 - select DEVFREQ_GOV_SIMPLE_ONDEMAND - select PM_OPP - help - This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int). - It reads PPMU counters of memory controllers and adjusts the - operating frequencies and voltages with OPP support. - config ARM_TEGRA_DEVFREQ tristate "Tegra DEVFREQ Driver" depends on ARCH_TEGRA_124_SOC diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile index 5134f9ee983d..09f11d9d40d5 100644 --- a/drivers/devfreq/Makefile +++ b/drivers/devfreq/Makefile @@ -4,10 +4,10 @@ obj-$(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) += governor_simpleondemand.o obj-$(CONFIG_DEVFREQ_GOV_PERFORMANCE) += governor_performance.o obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE) += governor_powersave.o obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o +obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o # DEVFREQ Drivers -obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/ -obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/ +obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o # DEVFREQ Event Drivers diff --git a/drivers/devfreq/devfreq-event.c b/drivers/devfreq/devfreq-event.c index 38bf144ca147..39b048eda2ce 100644 --- a/drivers/devfreq/devfreq-event.c +++ b/drivers/devfreq/devfreq-event.c @@ -235,6 +235,11 @@ struct devfreq_event_dev *devfreq_event_get_edev_by_phandle(struct device *dev, mutex_lock(&devfreq_event_list_lock); list_for_each_entry(edev, &devfreq_event_list, node) { + if (edev->dev.parent && edev->dev.parent->of_node == node) + goto out; + } + + list_for_each_entry(edev, &devfreq_event_list, node) { if (!strcmp(edev->desc->name, node->name)) goto out; } diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 984c5e9e7bdd..1d6c803804d5 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -25,6 +25,7 @@ #include <linux/list.h> #include <linux/printk.h> #include <linux/hrtimer.h> +#include <linux/of.h> #include "governor.h" static struct class *devfreq_class; @@ -188,6 +189,29 @@ static struct devfreq_governor *find_devfreq_governor(const char *name) return ERR_PTR(-ENODEV); } +static int devfreq_notify_transition(struct devfreq *devfreq, + struct devfreq_freqs *freqs, unsigned int state) +{ + if (!devfreq) + return -EINVAL; + + switch (state) { + case DEVFREQ_PRECHANGE: + srcu_notifier_call_chain(&devfreq->transition_notifier_list, + DEVFREQ_PRECHANGE, freqs); + break; + + case DEVFREQ_POSTCHANGE: + srcu_notifier_call_chain(&devfreq->transition_notifier_list, + DEVFREQ_POSTCHANGE, freqs); + break; + default: + return -EINVAL; + } + + return 0; +} + /* Load monitoring helper functions for governors use */ /** @@ -199,7 +223,8 @@ static struct devfreq_governor *find_devfreq_governor(const char *name) */ int update_devfreq(struct devfreq *devfreq) { - unsigned long freq; + struct devfreq_freqs freqs; + unsigned long freq, cur_freq; int err = 0; u32 flags = 0; @@ -233,10 +258,22 @@ int update_devfreq(struct devfreq *devfreq) flags |= DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use LUB */ } + if (devfreq->profile->get_cur_freq) + devfreq->profile->get_cur_freq(devfreq->dev.parent, &cur_freq); + else + cur_freq = devfreq->previous_freq; + + freqs.old = cur_freq; + freqs.new = freq; + devfreq_notify_transition(devfreq, &freqs, DEVFREQ_PRECHANGE); + err = devfreq->profile->target(devfreq->dev.parent, &freq, flags); if (err) return err; + freqs.new = freq; + devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); + if (devfreq->profile->freq_table) if (devfreq_update_status(devfreq, freq)) dev_err(&devfreq->dev, @@ -541,6 +578,8 @@ struct devfreq *devfreq_add_device(struct device *dev, goto err_out; } + srcu_init_notifier_head(&devfreq->transition_notifier_list); + mutex_unlock(&devfreq->lock); mutex_lock(&devfreq_list_lock); @@ -639,6 +678,49 @@ struct devfreq *devm_devfreq_add_device(struct device *dev, } EXPORT_SYMBOL(devm_devfreq_add_device); +#ifdef CONFIG_OF +/* + * devfreq_get_devfreq_by_phandle - Get the devfreq device from devicetree + * @dev - instance to the given device + * @index - index into list of devfreq + * + * return the instance of devfreq device + */ +struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index) +{ + struct device_node *node; + struct devfreq *devfreq; + + if (!dev) + return ERR_PTR(-EINVAL); + + if (!dev->of_node) + return ERR_PTR(-EINVAL); + + node = of_parse_phandle(dev->of_node, "devfreq", index); + if (!node) + return ERR_PTR(-ENODEV); + + mutex_lock(&devfreq_list_lock); + list_for_each_entry(devfreq, &devfreq_list, node) { + if (devfreq->dev.parent + && devfreq->dev.parent->of_node == node) { + mutex_unlock(&devfreq_list_lock); + return devfreq; + } + } + mutex_unlock(&devfreq_list_lock); + + return ERR_PTR(-EPROBE_DEFER); +} +#else +struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index) +{ + return ERR_PTR(-ENODEV); +} +#endif /* CONFIG_OF */ +EXPORT_SYMBOL_GPL(devfreq_get_devfreq_by_phandle); + /** * devm_devfreq_remove_device() - Resource-managed devfreq_remove_device() * @dev: the device to add devfreq feature. @@ -1266,6 +1348,129 @@ void devm_devfreq_unregister_opp_notifier(struct device *dev, } EXPORT_SYMBOL(devm_devfreq_unregister_opp_notifier); +/** + * devfreq_register_notifier() - Register a driver with devfreq + * @devfreq: The devfreq object. + * @nb: The notifier block to register. + * @list: DEVFREQ_TRANSITION_NOTIFIER. + */ +int devfreq_register_notifier(struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + int ret = 0; + + if (!devfreq) + return -EINVAL; + + switch (list) { + case DEVFREQ_TRANSITION_NOTIFIER: + ret = srcu_notifier_chain_register( + &devfreq->transition_notifier_list, nb); + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL(devfreq_register_notifier); + +/* + * devfreq_unregister_notifier() - Unregister a driver with devfreq + * @devfreq: The devfreq object. + * @nb: The notifier block to be unregistered. + * @list: DEVFREQ_TRANSITION_NOTIFIER. + */ +int devfreq_unregister_notifier(struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + int ret = 0; + + if (!devfreq) + return -EINVAL; + + switch (list) { + case DEVFREQ_TRANSITION_NOTIFIER: + ret = srcu_notifier_chain_unregister( + &devfreq->transition_notifier_list, nb); + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL(devfreq_unregister_notifier); + +struct devfreq_notifier_devres { + struct devfreq *devfreq; + struct notifier_block *nb; + unsigned int list; +}; + +static void devm_devfreq_notifier_release(struct device *dev, void *res) +{ + struct devfreq_notifier_devres *this = res; + + devfreq_unregister_notifier(this->devfreq, this->nb, this->list); +} + +/** + * devm_devfreq_register_notifier() + - Resource-managed devfreq_register_notifier() + * @dev: The devfreq user device. (parent of devfreq) + * @devfreq: The devfreq object. + * @nb: The notifier block to be unregistered. + * @list: DEVFREQ_TRANSITION_NOTIFIER. + */ +int devm_devfreq_register_notifier(struct device *dev, + struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + struct devfreq_notifier_devres *ptr; + int ret; + + ptr = devres_alloc(devm_devfreq_notifier_release, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + ret = devfreq_register_notifier(devfreq, nb, list); + if (ret) { + devres_free(ptr); + return ret; + } + + ptr->devfreq = devfreq; + ptr->nb = nb; + ptr->list = list; + devres_add(dev, ptr); + + return 0; +} +EXPORT_SYMBOL(devm_devfreq_register_notifier); + +/** + * devm_devfreq_unregister_notifier() + - Resource-managed devfreq_unregister_notifier() + * @dev: The devfreq user device. (parent of devfreq) + * @devfreq: The devfreq object. + * @nb: The notifier block to be unregistered. + * @list: DEVFREQ_TRANSITION_NOTIFIER. + */ +void devm_devfreq_unregister_notifier(struct device *dev, + struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + WARN_ON(devres_release(dev, devm_devfreq_notifier_release, + devm_devfreq_dev_match, devfreq)); +} +EXPORT_SYMBOL(devm_devfreq_unregister_notifier); + MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); MODULE_DESCRIPTION("devfreq class support"); MODULE_LICENSE("GPL"); diff --git a/drivers/devfreq/event/Kconfig b/drivers/devfreq/event/Kconfig index a11720affc31..1e8b4f469f38 100644 --- a/drivers/devfreq/event/Kconfig +++ b/drivers/devfreq/event/Kconfig @@ -13,6 +13,14 @@ menuconfig PM_DEVFREQ_EVENT if PM_DEVFREQ_EVENT +config DEVFREQ_EVENT_EXYNOS_NOCP + bool "EXYNOS NoC (Network On Chip) Probe DEVFREQ event Driver" + depends on ARCH_EXYNOS + select PM_OPP + help + This add the devfreq-event driver for Exynos SoC. It provides NoC + (Network on Chip) Probe counters to measure the bandwidth of AXI bus. + config DEVFREQ_EVENT_EXYNOS_PPMU bool "EXYNOS PPMU (Platform Performance Monitoring Unit) DEVFREQ event Driver" depends on ARCH_EXYNOS diff --git a/drivers/devfreq/event/Makefile b/drivers/devfreq/event/Makefile index be146ead79cf..3d6afd352253 100644 --- a/drivers/devfreq/event/Makefile +++ b/drivers/devfreq/event/Makefile @@ -1,2 +1,4 @@ # Exynos DEVFREQ Event Drivers + +obj-$(CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP) += exynos-nocp.o obj-$(CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU) += exynos-ppmu.o diff --git a/drivers/devfreq/event/exynos-nocp.c b/drivers/devfreq/event/exynos-nocp.c new file mode 100644 index 000000000000..6b6a5f310486 --- /dev/null +++ b/drivers/devfreq/event/exynos-nocp.c @@ -0,0 +1,304 @@ +/* + * exynos-nocp.c - EXYNOS NoC (Network On Chip) Probe support + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Author : Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/devfreq-event.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "exynos-nocp.h" + +struct exynos_nocp { + struct devfreq_event_dev *edev; + struct devfreq_event_desc desc; + + struct device *dev; + + struct regmap *regmap; + struct clk *clk; +}; + +/* + * The devfreq-event ops structure for nocp probe. + */ +static int exynos_nocp_set_event(struct devfreq_event_dev *edev) +{ + struct exynos_nocp *nocp = devfreq_event_get_drvdata(edev); + int ret; + + /* Disable NoC probe */ + ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL, + NOCP_MAIN_CTL_STATEN_MASK, 0); + if (ret < 0) { + dev_err(nocp->dev, "failed to disable the NoC probe device\n"); + return ret; + } + + /* Set a statistics dump period to 0 */ + ret = regmap_write(nocp->regmap, NOCP_STAT_PERIOD, 0x0); + if (ret < 0) + goto out; + + /* Set the IntEvent fields of *_SRC */ + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_0_SRC, + NOCP_CNT_SRC_INTEVENT_MASK, + NOCP_CNT_SRC_INTEVENT_BYTE_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_1_SRC, + NOCP_CNT_SRC_INTEVENT_MASK, + NOCP_CNT_SRC_INTEVENT_CHAIN_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_2_SRC, + NOCP_CNT_SRC_INTEVENT_MASK, + NOCP_CNT_SRC_INTEVENT_CYCLE_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_3_SRC, + NOCP_CNT_SRC_INTEVENT_MASK, + NOCP_CNT_SRC_INTEVENT_CHAIN_MASK); + if (ret < 0) + goto out; + + + /* Set an alarm with a max/min value of 0 to generate StatALARM */ + ret = regmap_write(nocp->regmap, NOCP_STAT_ALARM_MIN, 0x0); + if (ret < 0) + goto out; + + ret = regmap_write(nocp->regmap, NOCP_STAT_ALARM_MAX, 0x0); + if (ret < 0) + goto out; + + /* Set AlarmMode */ + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_0_ALARM_MODE, + NOCP_CNT_ALARM_MODE_MASK, + NOCP_CNT_ALARM_MODE_MIN_MAX_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_1_ALARM_MODE, + NOCP_CNT_ALARM_MODE_MASK, + NOCP_CNT_ALARM_MODE_MIN_MAX_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_2_ALARM_MODE, + NOCP_CNT_ALARM_MODE_MASK, + NOCP_CNT_ALARM_MODE_MIN_MAX_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_3_ALARM_MODE, + NOCP_CNT_ALARM_MODE_MASK, + NOCP_CNT_ALARM_MODE_MIN_MAX_MASK); + if (ret < 0) + goto out; + + /* Enable the measurements by setting AlarmEn and StatEn */ + ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL, + NOCP_MAIN_CTL_STATEN_MASK | NOCP_MAIN_CTL_ALARMEN_MASK, + NOCP_MAIN_CTL_STATEN_MASK | NOCP_MAIN_CTL_ALARMEN_MASK); + if (ret < 0) + goto out; + + /* Set GlobalEN */ + ret = regmap_update_bits(nocp->regmap, NOCP_CFG_CTL, + NOCP_CFG_CTL_GLOBALEN_MASK, + NOCP_CFG_CTL_GLOBALEN_MASK); + if (ret < 0) + goto out; + + /* Enable NoC probe */ + ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL, + NOCP_MAIN_CTL_STATEN_MASK, + NOCP_MAIN_CTL_STATEN_MASK); + if (ret < 0) + goto out; + + return 0; + +out: + /* Reset NoC probe */ + if (regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL, + NOCP_MAIN_CTL_STATEN_MASK, 0)) { + dev_err(nocp->dev, "Failed to reset NoC probe device\n"); + } + + return ret; +} + +static int exynos_nocp_get_event(struct devfreq_event_dev *edev, + struct devfreq_event_data *edata) +{ + struct exynos_nocp *nocp = devfreq_event_get_drvdata(edev); + unsigned int counter[4]; + int ret; + + /* Read cycle count */ + ret = regmap_read(nocp->regmap, NOCP_COUNTERS_0_VAL, &counter[0]); + if (ret < 0) + goto out; + + ret = regmap_read(nocp->regmap, NOCP_COUNTERS_1_VAL, &counter[1]); + if (ret < 0) + goto out; + + ret = regmap_read(nocp->regmap, NOCP_COUNTERS_2_VAL, &counter[2]); + if (ret < 0) + goto out; + + ret = regmap_read(nocp->regmap, NOCP_COUNTERS_3_VAL, &counter[3]); + if (ret < 0) + goto out; + + edata->load_count = ((counter[1] << 16) | counter[0]); + edata->total_count = ((counter[3] << 16) | counter[2]); + + dev_dbg(&edev->dev, "%s (event: %ld/%ld)\n", edev->desc->name, + edata->load_count, edata->total_count); + + return 0; + +out: + edata->load_count = 0; + edata->total_count = 0; + + dev_err(nocp->dev, "Failed to read the counter of NoC probe device\n"); + + return ret; +} + +static const struct devfreq_event_ops exynos_nocp_ops = { + .set_event = exynos_nocp_set_event, + .get_event = exynos_nocp_get_event, +}; + +static const struct of_device_id exynos_nocp_id_match[] = { + { .compatible = "samsung,exynos5420-nocp", }, + { /* sentinel */ }, +}; + +static struct regmap_config exynos_nocp_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = NOCP_COUNTERS_3_VAL, +}; + +static int exynos_nocp_parse_dt(struct platform_device *pdev, + struct exynos_nocp *nocp) +{ + struct device *dev = nocp->dev; + struct device_node *np = dev->of_node; + struct resource *res; + void __iomem *base; + + if (!np) { + dev_err(dev, "failed to find devicetree node\n"); + return -EINVAL; + } + + nocp->clk = devm_clk_get(dev, "nocp"); + if (IS_ERR(nocp->clk)) + nocp->clk = NULL; + + /* Maps the memory mapped IO to control nocp register */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (IS_ERR(res)) + return PTR_ERR(res); + + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + exynos_nocp_regmap_config.max_register = resource_size(res) - 4; + + nocp->regmap = devm_regmap_init_mmio(dev, base, + &exynos_nocp_regmap_config); + if (IS_ERR(nocp->regmap)) { + dev_err(dev, "failed to initialize regmap\n"); + return PTR_ERR(nocp->regmap); + } + + return 0; +} + +static int exynos_nocp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct exynos_nocp *nocp; + int ret; + + nocp = devm_kzalloc(&pdev->dev, sizeof(*nocp), GFP_KERNEL); + if (!nocp) + return -ENOMEM; + + nocp->dev = &pdev->dev; + + /* Parse dt data to get resource */ + ret = exynos_nocp_parse_dt(pdev, nocp); + if (ret < 0) { + dev_err(&pdev->dev, + "failed to parse devicetree for resource\n"); + return ret; + } + + /* Add devfreq-event device to measure the bandwidth of NoC */ + nocp->desc.ops = &exynos_nocp_ops; + nocp->desc.driver_data = nocp; + nocp->desc.name = np->full_name; + nocp->edev = devm_devfreq_event_add_edev(&pdev->dev, &nocp->desc); + if (IS_ERR(nocp->edev)) { + dev_err(&pdev->dev, + "failed to add devfreq-event device\n"); + return PTR_ERR(nocp->edev); + } + platform_set_drvdata(pdev, nocp); + + clk_prepare_enable(nocp->clk); + + pr_info("exynos-nocp: new NoC Probe device registered: %s\n", + dev_name(dev)); + + return 0; +} + +static int exynos_nocp_remove(struct platform_device *pdev) +{ + struct exynos_nocp *nocp = platform_get_drvdata(pdev); + + clk_disable_unprepare(nocp->clk); + + return 0; +} + +static struct platform_driver exynos_nocp_driver = { + .probe = exynos_nocp_probe, + .remove = exynos_nocp_remove, + .driver = { + .name = "exynos-nocp", + .of_match_table = exynos_nocp_id_match, + }, +}; +module_platform_driver(exynos_nocp_driver); + +MODULE_DESCRIPTION("Exynos NoC (Network on Chip) Probe driver"); +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/devfreq/event/exynos-nocp.h b/drivers/devfreq/event/exynos-nocp.h new file mode 100644 index 000000000000..28564db0edb8 --- /dev/null +++ b/drivers/devfreq/event/exynos-nocp.h @@ -0,0 +1,78 @@ +/* + * exynos-nocp.h - EXYNOS NoC (Network on Chip) Probe header file + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Author : Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __EXYNOS_NOCP_H__ +#define __EXYNOS_NOCP_H__ + +enum nocp_reg { + NOCP_ID_REVISION_ID = 0x04, + NOCP_MAIN_CTL = 0x08, + NOCP_CFG_CTL = 0x0C, + + NOCP_STAT_PERIOD = 0x24, + NOCP_STAT_GO = 0x28, + NOCP_STAT_ALARM_MIN = 0x2C, + NOCP_STAT_ALARM_MAX = 0x30, + NOCP_STAT_ALARM_STATUS = 0x34, + NOCP_STAT_ALARM_CLR = 0x38, + + NOCP_COUNTERS_0_SRC = 0x138, + NOCP_COUNTERS_0_ALARM_MODE = 0x13C, + NOCP_COUNTERS_0_VAL = 0x140, + + NOCP_COUNTERS_1_SRC = 0x14C, + NOCP_COUNTERS_1_ALARM_MODE = 0x150, + NOCP_COUNTERS_1_VAL = 0x154, + + NOCP_COUNTERS_2_SRC = 0x160, + NOCP_COUNTERS_2_ALARM_MODE = 0x164, + NOCP_COUNTERS_2_VAL = 0x168, + + NOCP_COUNTERS_3_SRC = 0x174, + NOCP_COUNTERS_3_ALARM_MODE = 0x178, + NOCP_COUNTERS_3_VAL = 0x17C, +}; + +/* NOCP_MAIN_CTL register */ +#define NOCP_MAIN_CTL_ERREN_MASK BIT(0) +#define NOCP_MAIN_CTL_TRACEEN_MASK BIT(1) +#define NOCP_MAIN_CTL_PAYLOADEN_MASK BIT(2) +#define NOCP_MAIN_CTL_STATEN_MASK BIT(3) +#define NOCP_MAIN_CTL_ALARMEN_MASK BIT(4) +#define NOCP_MAIN_CTL_STATCONDDUMP_MASK BIT(5) +#define NOCP_MAIN_CTL_INTRUSIVEMODE_MASK BIT(6) + +/* NOCP_CFG_CTL register */ +#define NOCP_CFG_CTL_GLOBALEN_MASK BIT(0) +#define NOCP_CFG_CTL_ACTIVE_MASK BIT(1) + +/* NOCP_COUNTERS_x_SRC register */ +#define NOCP_CNT_SRC_INTEVENT_SHIFT 0 +#define NOCP_CNT_SRC_INTEVENT_MASK (0x1F << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_OFF_MASK (0x0 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_CYCLE_MASK (0x1 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_IDLE_MASK (0x2 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_XFER_MASK (0x3 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_BUSY_MASK (0x4 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_WAIT_MASK (0x5 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_PKT_MASK (0x6 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_BYTE_MASK (0x8 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_CHAIN_MASK (0x10 << NOCP_CNT_SRC_INTEVENT_SHIFT) + +/* NOCP_COUNTERS_x_ALARM_MODE register */ +#define NOCP_CNT_ALARM_MODE_SHIFT 0 +#define NOCP_CNT_ALARM_MODE_MASK (0x3 << NOCP_CNT_ALARM_MODE_SHIFT) +#define NOCP_CNT_ALARM_MODE_OFF_MASK (0x0 << NOCP_CNT_ALARM_MODE_SHIFT) +#define NOCP_CNT_ALARM_MODE_MIN_MASK (0x1 << NOCP_CNT_ALARM_MODE_SHIFT) +#define NOCP_CNT_ALARM_MODE_MAX_MASK (0x2 << NOCP_CNT_ALARM_MODE_SHIFT) +#define NOCP_CNT_ALARM_MODE_MIN_MAX_MASK (0x3 << NOCP_CNT_ALARM_MODE_SHIFT) + +#endif /* __EXYNOS_NOCP_H__ */ diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c new file mode 100644 index 000000000000..2363d0a189b7 --- /dev/null +++ b/drivers/devfreq/exynos-bus.c @@ -0,0 +1,570 @@ +/* + * Generic Exynos Bus frequency driver with DEVFREQ Framework + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Author : Chanwoo Choi <cw00.choi@samsung.com> + * + * This driver support Exynos Bus frequency feature by using + * DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/devfreq.h> +#include <linux/devfreq-event.h> +#include <linux/device.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#define DEFAULT_SATURATION_RATIO 40 +#define DEFAULT_VOLTAGE_TOLERANCE 2 + +struct exynos_bus { + struct device *dev; + + struct devfreq *devfreq; + struct devfreq_event_dev **edev; + unsigned int edev_count; + struct mutex lock; + + struct dev_pm_opp *curr_opp; + + struct regulator *regulator; + struct clk *clk; + unsigned int voltage_tolerance; + unsigned int ratio; +}; + +/* + * Control the devfreq-event device to get the current state of bus + */ +#define exynos_bus_ops_edev(ops) \ +static int exynos_bus_##ops(struct exynos_bus *bus) \ +{ \ + int i, ret; \ + \ + for (i = 0; i < bus->edev_count; i++) { \ + if (!bus->edev[i]) \ + continue; \ + ret = devfreq_event_##ops(bus->edev[i]); \ + if (ret < 0) \ + return ret; \ + } \ + \ + return 0; \ +} +exynos_bus_ops_edev(enable_edev); +exynos_bus_ops_edev(disable_edev); +exynos_bus_ops_edev(set_event); + +static int exynos_bus_get_event(struct exynos_bus *bus, + struct devfreq_event_data *edata) +{ + struct devfreq_event_data event_data; + unsigned long load_count = 0, total_count = 0; + int i, ret = 0; + + for (i = 0; i < bus->edev_count; i++) { + if (!bus->edev[i]) + continue; + + ret = devfreq_event_get_event(bus->edev[i], &event_data); + if (ret < 0) + return ret; + + if (i == 0 || event_data.load_count > load_count) { + load_count = event_data.load_count; + total_count = event_data.total_count; + } + } + + edata->load_count = load_count; + edata->total_count = total_count; + + return ret; +} + +/* + * Must necessary function for devfreq simple-ondemand governor + */ +static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + struct dev_pm_opp *new_opp; + unsigned long old_freq, new_freq, old_volt, new_volt, tol; + int ret = 0; + + /* Get new opp-bus instance according to new bus clock */ + rcu_read_lock(); + new_opp = devfreq_recommended_opp(dev, freq, flags); + if (IS_ERR(new_opp)) { + dev_err(dev, "failed to get recommended opp instance\n"); + rcu_read_unlock(); + return PTR_ERR(new_opp); + } + + new_freq = dev_pm_opp_get_freq(new_opp); + new_volt = dev_pm_opp_get_voltage(new_opp); + old_freq = dev_pm_opp_get_freq(bus->curr_opp); + old_volt = dev_pm_opp_get_voltage(bus->curr_opp); + rcu_read_unlock(); + + if (old_freq == new_freq) + return 0; + tol = new_volt * bus->voltage_tolerance / 100; + + /* Change voltage and frequency according to new OPP level */ + mutex_lock(&bus->lock); + + if (old_freq < new_freq) { + ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol); + if (ret < 0) { + dev_err(bus->dev, "failed to set voltage\n"); + goto out; + } + } + + ret = clk_set_rate(bus->clk, new_freq); + if (ret < 0) { + dev_err(dev, "failed to change clock of bus\n"); + clk_set_rate(bus->clk, old_freq); + goto out; + } + + if (old_freq > new_freq) { + ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol); + if (ret < 0) { + dev_err(bus->dev, "failed to set voltage\n"); + goto out; + } + } + bus->curr_opp = new_opp; + + dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n", + old_freq/1000, new_freq/1000); +out: + mutex_unlock(&bus->lock); + + return ret; +} + +static int exynos_bus_get_dev_status(struct device *dev, + struct devfreq_dev_status *stat) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + struct devfreq_event_data edata; + int ret; + + rcu_read_lock(); + stat->current_frequency = dev_pm_opp_get_freq(bus->curr_opp); + rcu_read_unlock(); + + ret = exynos_bus_get_event(bus, &edata); + if (ret < 0) { + stat->total_time = stat->busy_time = 0; + goto err; + } + + stat->busy_time = (edata.load_count * 100) / bus->ratio; + stat->total_time = edata.total_count; + + dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time, + stat->total_time); + +err: + ret = exynos_bus_set_event(bus); + if (ret < 0) { + dev_err(dev, "failed to set event to devfreq-event devices\n"); + return ret; + } + + return ret; +} + +static void exynos_bus_exit(struct device *dev) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + int ret; + + ret = exynos_bus_disable_edev(bus); + if (ret < 0) + dev_warn(dev, "failed to disable the devfreq-event devices\n"); + + if (bus->regulator) + regulator_disable(bus->regulator); + + dev_pm_opp_of_remove_table(dev); + clk_disable_unprepare(bus->clk); +} + +/* + * Must necessary function for devfreq passive governor + */ +static int exynos_bus_passive_target(struct device *dev, unsigned long *freq, + u32 flags) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + struct dev_pm_opp *new_opp; + unsigned long old_freq, new_freq; + int ret = 0; + + /* Get new opp-bus instance according to new bus clock */ + rcu_read_lock(); + new_opp = devfreq_recommended_opp(dev, freq, flags); + if (IS_ERR(new_opp)) { + dev_err(dev, "failed to get recommended opp instance\n"); + rcu_read_unlock(); + return PTR_ERR(new_opp); + } + + new_freq = dev_pm_opp_get_freq(new_opp); + old_freq = dev_pm_opp_get_freq(bus->curr_opp); + rcu_read_unlock(); + + if (old_freq == new_freq) + return 0; + + /* Change the frequency according to new OPP level */ + mutex_lock(&bus->lock); + + ret = clk_set_rate(bus->clk, new_freq); + if (ret < 0) { + dev_err(dev, "failed to set the clock of bus\n"); + goto out; + } + + *freq = new_freq; + bus->curr_opp = new_opp; + + dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n", + old_freq/1000, new_freq/1000); +out: + mutex_unlock(&bus->lock); + + return ret; +} + +static void exynos_bus_passive_exit(struct device *dev) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + + dev_pm_opp_of_remove_table(dev); + clk_disable_unprepare(bus->clk); +} + +static int exynos_bus_parent_parse_of(struct device_node *np, + struct exynos_bus *bus) +{ + struct device *dev = bus->dev; + int i, ret, count, size; + + /* Get the regulator to provide each bus with the power */ + bus->regulator = devm_regulator_get(dev, "vdd"); + if (IS_ERR(bus->regulator)) { + dev_err(dev, "failed to get VDD regulator\n"); + return PTR_ERR(bus->regulator); + } + + ret = regulator_enable(bus->regulator); + if (ret < 0) { + dev_err(dev, "failed to enable VDD regulator\n"); + return ret; + } + + /* + * Get the devfreq-event devices to get the current utilization of + * buses. This raw data will be used in devfreq ondemand governor. + */ + count = devfreq_event_get_edev_count(dev); + if (count < 0) { + dev_err(dev, "failed to get the count of devfreq-event dev\n"); + ret = count; + goto err_regulator; + } + bus->edev_count = count; + + size = sizeof(*bus->edev) * count; + bus->edev = devm_kzalloc(dev, size, GFP_KERNEL); + if (!bus->edev) { + ret = -ENOMEM; + goto err_regulator; + } + + for (i = 0; i < count; i++) { + bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, i); + if (IS_ERR(bus->edev[i])) { + ret = -EPROBE_DEFER; + goto err_regulator; + } + } + + /* + * Optionally, Get the saturation ratio according to Exynos SoC + * When measuring the utilization of each AXI bus with devfreq-event + * devices, the measured real cycle might be much lower than the + * total cycle of bus during sampling rate. In result, the devfreq + * simple-ondemand governor might not decide to change the current + * frequency due to too utilization (= real cycle/total cycle). + * So, this property is used to adjust the utilization when calculating + * the busy_time in exynos_bus_get_dev_status(). + */ + if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio)) + bus->ratio = DEFAULT_SATURATION_RATIO; + + if (of_property_read_u32(np, "exynos,voltage-tolerance", + &bus->voltage_tolerance)) + bus->voltage_tolerance = DEFAULT_VOLTAGE_TOLERANCE; + + return 0; + +err_regulator: + regulator_disable(bus->regulator); + + return ret; +} + +static int exynos_bus_parse_of(struct device_node *np, + struct exynos_bus *bus) +{ + struct device *dev = bus->dev; + unsigned long rate; + int ret; + + /* Get the clock to provide each bus with source clock */ + bus->clk = devm_clk_get(dev, "bus"); + if (IS_ERR(bus->clk)) { + dev_err(dev, "failed to get bus clock\n"); + return PTR_ERR(bus->clk); + } + + ret = clk_prepare_enable(bus->clk); + if (ret < 0) { + dev_err(dev, "failed to get enable clock\n"); + return ret; + } + + /* Get the freq and voltage from OPP table to scale the bus freq */ + rcu_read_lock(); + ret = dev_pm_opp_of_add_table(dev); + if (ret < 0) { + dev_err(dev, "failed to get OPP table\n"); + rcu_read_unlock(); + goto err_clk; + } + + rate = clk_get_rate(bus->clk); + bus->curr_opp = devfreq_recommended_opp(dev, &rate, 0); + if (IS_ERR(bus->curr_opp)) { + dev_err(dev, "failed to find dev_pm_opp\n"); + rcu_read_unlock(); + ret = PTR_ERR(bus->curr_opp); + goto err_opp; + } + rcu_read_unlock(); + + return 0; + +err_opp: + dev_pm_opp_of_remove_table(dev); +err_clk: + clk_disable_unprepare(bus->clk); + + return ret; +} + +static int exynos_bus_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct devfreq_dev_profile *profile; + struct devfreq_simple_ondemand_data *ondemand_data; + struct devfreq_passive_data *passive_data; + struct devfreq *parent_devfreq; + struct exynos_bus *bus; + int ret, max_state; + unsigned long min_freq, max_freq; + + if (!np) { + dev_err(dev, "failed to find devicetree node\n"); + return -EINVAL; + } + + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); + if (!bus) + return -ENOMEM; + mutex_init(&bus->lock); + bus->dev = &pdev->dev; + platform_set_drvdata(pdev, bus); + + /* Parse the device-tree to get the resource information */ + ret = exynos_bus_parse_of(np, bus); + if (ret < 0) + goto err; + + profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL); + if (!profile) { + ret = -ENOMEM; + goto err; + } + + if (of_parse_phandle(dev->of_node, "devfreq", 0)) + goto passive; + else + ret = exynos_bus_parent_parse_of(np, bus); + + if (ret < 0) + goto err; + + /* Initialize the struct profile and governor data for parent device */ + profile->polling_ms = 50; + profile->target = exynos_bus_target; + profile->get_dev_status = exynos_bus_get_dev_status; + profile->exit = exynos_bus_exit; + + ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL); + if (!ondemand_data) { + ret = -ENOMEM; + goto err; + } + ondemand_data->upthreshold = 40; + ondemand_data->downdifferential = 5; + + /* Add devfreq device to monitor and handle the exynos bus */ + bus->devfreq = devm_devfreq_add_device(dev, profile, "simple_ondemand", + ondemand_data); + if (IS_ERR(bus->devfreq)) { + dev_err(dev, "failed to add devfreq device\n"); + ret = PTR_ERR(bus->devfreq); + goto err; + } + + /* Register opp_notifier to catch the change of OPP */ + ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq); + if (ret < 0) { + dev_err(dev, "failed to register opp notifier\n"); + goto err; + } + + /* + * Enable devfreq-event to get raw data which is used to determine + * current bus load. + */ + ret = exynos_bus_enable_edev(bus); + if (ret < 0) { + dev_err(dev, "failed to enable devfreq-event devices\n"); + goto err; + } + + ret = exynos_bus_set_event(bus); + if (ret < 0) { + dev_err(dev, "failed to set event to devfreq-event devices\n"); + goto err; + } + + goto out; +passive: + /* Initialize the struct profile and governor data for passive device */ + profile->target = exynos_bus_passive_target; + profile->exit = exynos_bus_passive_exit; + + /* Get the instance of parent devfreq device */ + parent_devfreq = devfreq_get_devfreq_by_phandle(dev, 0); + if (IS_ERR(parent_devfreq)) { + ret = -EPROBE_DEFER; + goto err; + } + + passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL); + if (!passive_data) { + ret = -ENOMEM; + goto err; + } + passive_data->parent = parent_devfreq; + + /* Add devfreq device for exynos bus with passive governor */ + bus->devfreq = devm_devfreq_add_device(dev, profile, "passive", + passive_data); + if (IS_ERR(bus->devfreq)) { + dev_err(dev, + "failed to add devfreq dev with passive governor\n"); + ret = -EPROBE_DEFER; + goto err; + } + +out: + max_state = bus->devfreq->profile->max_state; + min_freq = (bus->devfreq->profile->freq_table[0] / 1000); + max_freq = (bus->devfreq->profile->freq_table[max_state - 1] / 1000); + pr_info("exynos-bus: new bus device registered: %s (%6ld KHz ~ %6ld KHz)\n", + dev_name(dev), min_freq, max_freq); + + return 0; + +err: + dev_pm_opp_of_remove_table(dev); + clk_disable_unprepare(bus->clk); + + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int exynos_bus_resume(struct device *dev) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + int ret; + + ret = exynos_bus_enable_edev(bus); + if (ret < 0) { + dev_err(dev, "failed to enable the devfreq-event devices\n"); + return ret; + } + + return 0; +} + +static int exynos_bus_suspend(struct device *dev) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + int ret; + + ret = exynos_bus_disable_edev(bus); + if (ret < 0) { + dev_err(dev, "failed to disable the devfreq-event devices\n"); + return ret; + } + + return 0; +} +#endif + +static const struct dev_pm_ops exynos_bus_pm = { + SET_SYSTEM_SLEEP_PM_OPS(exynos_bus_suspend, exynos_bus_resume) +}; + +static const struct of_device_id exynos_bus_of_match[] = { + { .compatible = "samsung,exynos-bus", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, exynos_bus_of_match); + +static struct platform_driver exynos_bus_platdrv = { + .probe = exynos_bus_probe, + .driver = { + .name = "exynos-bus", + .pm = &exynos_bus_pm, + .of_match_table = of_match_ptr(exynos_bus_of_match), + }, +}; +module_platform_driver(exynos_bus_platdrv); + +MODULE_DESCRIPTION("Generic Exynos Bus frequency driver"); +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile deleted file mode 100644 index 49bc9175f923..000000000000 --- a/drivers/devfreq/exynos/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# Exynos DEVFREQ Drivers -obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos_ppmu.o exynos4_bus.o -obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c deleted file mode 100644 index da9509205169..000000000000 --- a/drivers/devfreq/exynos/exynos4_bus.c +++ /dev/null @@ -1,1055 +0,0 @@ -/* drivers/devfreq/exynos4210_memorybus.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * MyungJoo Ham <myungjoo.ham@samsung.com> - * - * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework - * This version supports EXYNOS4210 only. This changes bus frequencies - * and vddint voltages. Exynos4412/4212 should be able to be supported - * with minor modifications. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/suspend.h> -#include <linux/pm_opp.h> -#include <linux/devfreq.h> -#include <linux/platform_device.h> -#include <linux/regulator/consumer.h> -#include <linux/module.h> - -#include <mach/map.h> - -#include "exynos_ppmu.h" -#include "exynos4_bus.h" - -#define MAX_SAFEVOLT 1200000 /* 1.2V */ - -enum exynos4_busf_type { - TYPE_BUSF_EXYNOS4210, - TYPE_BUSF_EXYNOS4x12, -}; - -/* Assume that the bus is saturated if the utilization is 40% */ -#define BUS_SATURATION_RATIO 40 - -enum busclk_level_idx { - LV_0 = 0, - LV_1, - LV_2, - LV_3, - LV_4, - _LV_END -}; - -enum exynos_ppmu_idx { - PPMU_DMC0, - PPMU_DMC1, - PPMU_END, -}; - -#define EX4210_LV_MAX LV_2 -#define EX4x12_LV_MAX LV_4 -#define EX4210_LV_NUM (LV_2 + 1) -#define EX4x12_LV_NUM (LV_4 + 1) - -/** - * struct busfreq_opp_info - opp information for bus - * @rate: Frequency in hertz - * @volt: Voltage in microvolts corresponding to this OPP - */ -struct busfreq_opp_info { - unsigned long rate; - unsigned long volt; -}; - -struct busfreq_data { - enum exynos4_busf_type type; - struct device *dev; - struct devfreq *devfreq; - bool disabled; - struct regulator *vdd_int; - struct regulator *vdd_mif; /* Exynos4412/4212 only */ - struct busfreq_opp_info curr_oppinfo; - struct busfreq_ppmu_data ppmu_data; - - struct notifier_block pm_notifier; - struct mutex lock; - - /* Dividers calculated at boot/probe-time */ - unsigned int dmc_divtable[_LV_END]; /* DMC0 */ - unsigned int top_divtable[_LV_END]; -}; - -/* 4210 controls clock of mif and voltage of int */ -static struct bus_opp_table exynos4210_busclk_table[] = { - {LV_0, 400000, 1150000}, - {LV_1, 267000, 1050000}, - {LV_2, 133000, 1025000}, - {0, 0, 0}, -}; - -/* - * MIF is the main control knob clock for Exynos4x12 MIF/INT - * clock and voltage of both mif/int are controlled. - */ -static struct bus_opp_table exynos4x12_mifclk_table[] = { - {LV_0, 400000, 1100000}, - {LV_1, 267000, 1000000}, - {LV_2, 160000, 950000}, - {LV_3, 133000, 950000}, - {LV_4, 100000, 950000}, - {0, 0, 0}, -}; - -/* - * INT is not the control knob of 4x12. LV_x is not meant to represent - * the current performance. (MIF does) - */ -static struct bus_opp_table exynos4x12_intclk_table[] = { - {LV_0, 200000, 1000000}, - {LV_1, 160000, 950000}, - {LV_2, 133000, 925000}, - {LV_3, 100000, 900000}, - {0, 0, 0}, -}; - -/* TODO: asv volt definitions are "__initdata"? */ -/* Some chips have different operating voltages */ -static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = { - {1150000, 1050000, 1050000}, - {1125000, 1025000, 1025000}, - {1100000, 1000000, 1000000}, - {1075000, 975000, 975000}, - {1050000, 950000, 950000}, -}; - -static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = { - /* 400 267 160 133 100 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV0 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV1 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV2 */ - {1050000, 900000, 900000, 900000, 900000}, /* ASV3 */ - {1050000, 900000, 900000, 900000, 850000}, /* ASV4 */ - {1050000, 900000, 900000, 850000, 850000}, /* ASV5 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV6 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV7 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV8 */ -}; - -static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = { - /* 200 160 133 100 */ - {1000000, 950000, 925000, 900000}, /* ASV0 */ - {975000, 925000, 925000, 900000}, /* ASV1 */ - {950000, 925000, 900000, 875000}, /* ASV2 */ - {950000, 900000, 900000, 875000}, /* ASV3 */ - {925000, 875000, 875000, 875000}, /* ASV4 */ - {900000, 850000, 850000, 850000}, /* ASV5 */ - {900000, 850000, 850000, 850000}, /* ASV6 */ - {900000, 850000, 850000, 850000}, /* ASV7 */ - {900000, 850000, 850000, 850000}, /* ASV8 */ -}; - -/*** Clock Divider Data for Exynos4210 ***/ -static unsigned int exynos4210_clkdiv_dmc0[][8] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } - */ - - /* DMC L0: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - /* DMC L1: 266.7MHz */ - { 4, 1, 1, 2, 1, 1, 3, 1 }, - /* DMC L2: 133MHz */ - { 5, 1, 1, 5, 1, 1, 3, 1 }, -}; -static unsigned int exynos4210_clkdiv_top[][5] = { - /* - * Clock divider value for following - * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } - */ - /* ACLK200 L0: 200MHz */ - { 3, 7, 4, 5, 1 }, - /* ACLK200 L1: 160MHz */ - { 4, 7, 5, 6, 1 }, - /* ACLK200 L2: 133MHz */ - { 5, 7, 7, 7, 1 }, -}; -static unsigned int exynos4210_clkdiv_lr_bus[][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - /* ACLK_GDL/R L1: 200MHz */ - { 3, 1 }, - /* ACLK_GDL/R L2: 160MHz */ - { 4, 1 }, - /* ACLK_GDL/R L3: 133MHz */ - { 5, 1 }, -}; - -/*** Clock Divider Data for Exynos4212/4412 ***/ -static unsigned int exynos4x12_clkdiv_dmc0[][6] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP} - */ - - /* DMC L0: 400MHz */ - {3, 1, 1, 1, 1, 1}, - /* DMC L1: 266.7MHz */ - {4, 1, 1, 2, 1, 1}, - /* DMC L2: 160MHz */ - {5, 1, 1, 4, 1, 1}, - /* DMC L3: 133MHz */ - {5, 1, 1, 5, 1, 1}, - /* DMC L4: 100MHz */ - {7, 1, 1, 7, 1, 1}, -}; -static unsigned int exynos4x12_clkdiv_dmc1[][6] = { - /* - * Clock divider value for following - * { G2DACP, DIVC2C, DIVC2C_ACLK } - */ - - /* DMC L0: 400MHz */ - {3, 1, 1}, - /* DMC L1: 266.7MHz */ - {4, 2, 1}, - /* DMC L2: 160MHz */ - {5, 4, 1}, - /* DMC L3: 133MHz */ - {5, 5, 1}, - /* DMC L4: 100MHz */ - {7, 7, 1}, -}; -static unsigned int exynos4x12_clkdiv_top[][5] = { - /* - * Clock divider value for following - * { DIVACLK266_GPS, DIVACLK100, DIVACLK160, - DIVACLK133, DIVONENAND } - */ - - /* ACLK_GDL/R L0: 200MHz */ - {2, 7, 4, 5, 1}, - /* ACLK_GDL/R L1: 200MHz */ - {2, 7, 4, 5, 1}, - /* ACLK_GDL/R L2: 160MHz */ - {4, 7, 5, 7, 1}, - /* ACLK_GDL/R L3: 133MHz */ - {4, 7, 5, 7, 1}, - /* ACLK_GDL/R L4: 100MHz */ - {7, 7, 7, 7, 1}, -}; -static unsigned int exynos4x12_clkdiv_lr_bus[][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - - /* ACLK_GDL/R L0: 200MHz */ - {3, 1}, - /* ACLK_GDL/R L1: 200MHz */ - {3, 1}, - /* ACLK_GDL/R L2: 160MHz */ - {4, 1}, - /* ACLK_GDL/R L3: 133MHz */ - {5, 1}, - /* ACLK_GDL/R L4: 100MHz */ - {7, 1}, -}; -static unsigned int exynos4x12_clkdiv_sclkip[][3] = { - /* - * Clock divider value for following - * { DIVMFC, DIVJPEG, DIVFIMC0~3} - */ - - /* SCLK_MFC: 200MHz */ - {3, 3, 4}, - /* SCLK_MFC: 200MHz */ - {3, 3, 4}, - /* SCLK_MFC: 160MHz */ - {4, 4, 5}, - /* SCLK_MFC: 133MHz */ - {5, 5, 5}, - /* SCLK_MFC: 100MHz */ - {7, 7, 7}, -}; - - -static int exynos4210_set_busclk(struct busfreq_data *data, - struct busfreq_opp_info *oppi) -{ - unsigned int index; - unsigned int tmp; - - for (index = LV_0; index < EX4210_LV_NUM; index++) - if (oppi->rate == exynos4210_busclk_table[index].clk) - break; - - if (index == EX4210_LV_NUM) - return -EINVAL; - - /* Change Divider - DMC0 */ - tmp = data->dmc_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - TOP */ - tmp = data->top_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4210_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4210_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); - - return 0; -} - -static int exynos4x12_set_busclk(struct busfreq_data *data, - struct busfreq_opp_info *oppi) -{ - unsigned int index; - unsigned int tmp; - - for (index = LV_0; index < EX4x12_LV_NUM; index++) - if (oppi->rate == exynos4x12_mifclk_table[index].clk) - break; - - if (index == EX4x12_LV_NUM) - return -EINVAL; - - /* Change Divider - DMC0 */ - tmp = data->dmc_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - DMC1 */ - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1); - - tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK | - EXYNOS4_CLKDIV_DMC1_C2C_MASK | - EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK); - - tmp |= ((exynos4x12_clkdiv_dmc1[index][0] << - EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) | - (exynos4x12_clkdiv_dmc1[index][1] << - EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) | - (exynos4x12_clkdiv_dmc1[index][2] << - EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1); - } while (tmp & 0x111111); - - /* Change Divider - TOP */ - tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); - - tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK | - EXYNOS4_CLKDIV_TOP_ACLK100_MASK | - EXYNOS4_CLKDIV_TOP_ACLK160_MASK | - EXYNOS4_CLKDIV_TOP_ACLK133_MASK | - EXYNOS4_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((exynos4x12_clkdiv_top[index][0] << - EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) | - (exynos4x12_clkdiv_top[index][1] << - EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | - (exynos4x12_clkdiv_top[index][2] << - EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | - (exynos4x12_clkdiv_top[index][3] << - EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | - (exynos4x12_clkdiv_top[index][4] << - EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4x12_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4x12_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); - - /* Change Divider - MFC */ - tmp = __raw_readl(EXYNOS4_CLKDIV_MFC); - - tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][0] << - EXYNOS4_CLKDIV_MFC_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_MFC); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC); - } while (tmp & 0x1); - - /* Change Divider - JPEG */ - tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1); - - tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][1] << - EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); - } while (tmp & 0x1); - - /* Change Divider - FIMC0~3 */ - tmp = __raw_readl(EXYNOS4_CLKDIV_CAM); - - tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK | - EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_CAM); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); - } while (tmp & 0x1111); - - return 0; -} - -static int exynos4x12_get_intspec(unsigned long mifclk) -{ - int i = 0; - - while (exynos4x12_intclk_table[i].clk) { - if (exynos4x12_intclk_table[i].clk <= mifclk) - return i; - i++; - } - - return -EINVAL; -} - -static int exynos4_bus_setvolt(struct busfreq_data *data, - struct busfreq_opp_info *oppi, - struct busfreq_opp_info *oldoppi) -{ - int err = 0, tmp; - unsigned long volt = oppi->volt; - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - /* OPP represents DMC clock + INT voltage */ - err = regulator_set_voltage(data->vdd_int, volt, - MAX_SAFEVOLT); - break; - case TYPE_BUSF_EXYNOS4x12: - /* OPP represents MIF clock + MIF voltage */ - err = regulator_set_voltage(data->vdd_mif, volt, - MAX_SAFEVOLT); - if (err) - break; - - tmp = exynos4x12_get_intspec(oppi->rate); - if (tmp < 0) { - err = tmp; - regulator_set_voltage(data->vdd_mif, - oldoppi->volt, - MAX_SAFEVOLT); - break; - } - err = regulator_set_voltage(data->vdd_int, - exynos4x12_intclk_table[tmp].volt, - MAX_SAFEVOLT); - /* Try to recover */ - if (err) - regulator_set_voltage(data->vdd_mif, - oldoppi->volt, - MAX_SAFEVOLT); - break; - default: - err = -EINVAL; - } - - return err; -} - -static int exynos4_bus_target(struct device *dev, unsigned long *_freq, - u32 flags) -{ - int err = 0; - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data *data = platform_get_drvdata(pdev); - struct dev_pm_opp *opp; - unsigned long freq; - unsigned long old_freq = data->curr_oppinfo.rate; - struct busfreq_opp_info new_oppinfo; - - rcu_read_lock(); - opp = devfreq_recommended_opp(dev, _freq, flags); - if (IS_ERR(opp)) { - rcu_read_unlock(); - return PTR_ERR(opp); - } - new_oppinfo.rate = dev_pm_opp_get_freq(opp); - new_oppinfo.volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - freq = new_oppinfo.rate; - - if (old_freq == freq) - return 0; - - dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt); - - mutex_lock(&data->lock); - - if (data->disabled) - goto out; - - if (old_freq < freq) - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto out; - - if (old_freq != freq) { - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, &new_oppinfo); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, &new_oppinfo); - break; - default: - err = -EINVAL; - } - } - if (err) - goto out; - - if (old_freq > freq) - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto out; - - data->curr_oppinfo = new_oppinfo; -out: - mutex_unlock(&data->lock); - return err; -} - -static int exynos4_bus_get_dev_status(struct device *dev, - struct devfreq_dev_status *stat) -{ - struct busfreq_data *data = dev_get_drvdata(dev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - int busier; - - exynos_read_ppmu(ppmu_data); - busier = exynos_get_busier_ppmu(ppmu_data); - stat->current_frequency = data->curr_oppinfo.rate; - - /* Number of cycles spent on memory access */ - stat->busy_time = ppmu_data->ppmu[busier].count[PPMU_PMNCNT3]; - stat->busy_time *= 100 / BUS_SATURATION_RATIO; - stat->total_time = ppmu_data->ppmu[busier].ccnt; - - /* If the counters have overflown, retry */ - if (ppmu_data->ppmu[busier].ccnt_overflow || - ppmu_data->ppmu[busier].count_overflow[0]) - return -EAGAIN; - - return 0; -} - -static struct devfreq_dev_profile exynos4_devfreq_profile = { - .initial_freq = 400000, - .polling_ms = 50, - .target = exynos4_bus_target, - .get_dev_status = exynos4_bus_get_dev_status, -}; - -static int exynos4210_init_tables(struct busfreq_data *data) -{ - u32 tmp; - int mgrp; - int i, err = 0; - - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); - for (i = LV_0; i < EX4210_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | - EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | - EXYNOS4_CLKDIV_DMC0_DPHY_MASK | - EXYNOS4_CLKDIV_DMC0_DMC_MASK | - EXYNOS4_CLKDIV_DMC0_DMCD_MASK | - EXYNOS4_CLKDIV_DMC0_DMCP_MASK | - EXYNOS4_CLKDIV_DMC0_COPY2_MASK | - EXYNOS4_CLKDIV_DMC0_CORETI_MASK); - - tmp |= ((exynos4210_clkdiv_dmc0[i][0] << - EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | - (exynos4210_clkdiv_dmc0[i][1] << - EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (exynos4210_clkdiv_dmc0[i][2] << - EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | - (exynos4210_clkdiv_dmc0[i][3] << - EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | - (exynos4210_clkdiv_dmc0[i][4] << - EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | - (exynos4210_clkdiv_dmc0[i][5] << - EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) | - (exynos4210_clkdiv_dmc0[i][6] << - EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) | - (exynos4210_clkdiv_dmc0[i][7] << - EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)); - - data->dmc_divtable[i] = tmp; - } - - tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); - for (i = LV_0; i < EX4210_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK | - EXYNOS4_CLKDIV_TOP_ACLK100_MASK | - EXYNOS4_CLKDIV_TOP_ACLK160_MASK | - EXYNOS4_CLKDIV_TOP_ACLK133_MASK | - EXYNOS4_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((exynos4210_clkdiv_top[i][0] << - EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) | - (exynos4210_clkdiv_top[i][1] << - EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | - (exynos4210_clkdiv_top[i][2] << - EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | - (exynos4210_clkdiv_top[i][3] << - EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | - (exynos4210_clkdiv_top[i][4] << - EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); - - data->top_divtable[i] = tmp; - } - - /* - * TODO: init tmp based on busfreq_data - * (device-tree or platform-data) - */ - tmp = 0; /* Max voltages for the reliability of the unknown */ - - pr_debug("ASV Group of Exynos4 is %d\n", tmp); - /* Use merged grouping for voltage */ - switch (tmp) { - case 0: - mgrp = 0; - break; - case 1: - case 2: - mgrp = 1; - break; - case 3: - case 4: - mgrp = 2; - break; - case 5: - case 6: - mgrp = 3; - break; - case 7: - mgrp = 4; - break; - default: - pr_warn("Unknown ASV Group. Use max voltage.\n"); - mgrp = 0; - } - - for (i = LV_0; i < EX4210_LV_NUM; i++) - exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i]; - - for (i = LV_0; i < EX4210_LV_NUM; i++) { - err = dev_pm_opp_add(data->dev, exynos4210_busclk_table[i].clk, - exynos4210_busclk_table[i].volt); - if (err) { - dev_err(data->dev, "Cannot add opp entries.\n"); - return err; - } - } - - - return 0; -} - -static int exynos4x12_init_tables(struct busfreq_data *data) -{ - unsigned int i; - unsigned int tmp; - int ret; - - /* Enable pause function for DREX2 DVFS */ - tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL); - tmp |= EXYNOS4_DMC_PAUSE_ENABLE; - __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL); - - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); - - for (i = 0; i < EX4x12_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | - EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | - EXYNOS4_CLKDIV_DMC0_DPHY_MASK | - EXYNOS4_CLKDIV_DMC0_DMC_MASK | - EXYNOS4_CLKDIV_DMC0_DMCD_MASK | - EXYNOS4_CLKDIV_DMC0_DMCP_MASK); - - tmp |= ((exynos4x12_clkdiv_dmc0[i][0] << - EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][1] << - EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][2] << - EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][3] << - EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][4] << - EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][5] << - EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)); - - data->dmc_divtable[i] = tmp; - } - - tmp = 0; /* Max voltages for the reliability of the unknown */ - - if (tmp > 8) - tmp = 0; - pr_debug("ASV Group of Exynos4x12 is %d\n", tmp); - - for (i = 0; i < EX4x12_LV_NUM; i++) { - exynos4x12_mifclk_table[i].volt = - exynos4x12_mif_step_50[tmp][i]; - exynos4x12_intclk_table[i].volt = - exynos4x12_int_volt[tmp][i]; - } - - for (i = 0; i < EX4x12_LV_NUM; i++) { - ret = dev_pm_opp_add(data->dev, exynos4x12_mifclk_table[i].clk, - exynos4x12_mifclk_table[i].volt); - if (ret) { - dev_err(data->dev, "Fail to add opp entries.\n"); - return ret; - } - } - - return 0; -} - -static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct busfreq_data *data = container_of(this, struct busfreq_data, - pm_notifier); - struct dev_pm_opp *opp; - struct busfreq_opp_info new_oppinfo; - unsigned long maxfreq = ULONG_MAX; - int err = 0; - - switch (event) { - case PM_SUSPEND_PREPARE: - /* Set Fastest and Deactivate DVFS */ - mutex_lock(&data->lock); - - data->disabled = true; - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(data->dev, "%s: unable to find a min freq\n", - __func__); - mutex_unlock(&data->lock); - return PTR_ERR(opp); - } - new_oppinfo.rate = dev_pm_opp_get_freq(opp); - new_oppinfo.volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto unlock; - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, &new_oppinfo); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, &new_oppinfo); - break; - default: - err = -EINVAL; - } - if (err) - goto unlock; - - data->curr_oppinfo = new_oppinfo; -unlock: - mutex_unlock(&data->lock); - if (err) - return err; - return NOTIFY_OK; - case PM_POST_RESTORE: - case PM_POST_SUSPEND: - /* Reactivate */ - mutex_lock(&data->lock); - data->disabled = false; - mutex_unlock(&data->lock); - return NOTIFY_OK; - } - - return NOTIFY_DONE; -} - -static int exynos4_busfreq_probe(struct platform_device *pdev) -{ - struct busfreq_data *data; - struct busfreq_ppmu_data *ppmu_data; - struct dev_pm_opp *opp; - struct device *dev = &pdev->dev; - int err = 0; - - data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL); - if (data == NULL) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - - ppmu_data = &data->ppmu_data; - ppmu_data->ppmu_end = PPMU_END; - ppmu_data->ppmu = devm_kzalloc(dev, - sizeof(struct exynos_ppmu) * PPMU_END, - GFP_KERNEL); - if (!ppmu_data->ppmu) { - dev_err(dev, "Failed to allocate memory for exynos_ppmu\n"); - return -ENOMEM; - } - - data->type = pdev->id_entry->driver_data; - ppmu_data->ppmu[PPMU_DMC0].hw_base = S5P_VA_DMC0; - ppmu_data->ppmu[PPMU_DMC1].hw_base = S5P_VA_DMC1; - data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event; - data->dev = dev; - mutex_init(&data->lock); - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_init_tables(data); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_init_tables(data); - break; - default: - dev_err(dev, "Cannot determine the device id %d\n", data->type); - err = -EINVAL; - } - if (err) { - dev_err(dev, "Cannot initialize busfreq table %d\n", - data->type); - return err; - } - - data->vdd_int = devm_regulator_get(dev, "vdd_int"); - if (IS_ERR(data->vdd_int)) { - dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); - return PTR_ERR(data->vdd_int); - } - if (data->type == TYPE_BUSF_EXYNOS4x12) { - data->vdd_mif = devm_regulator_get(dev, "vdd_mif"); - if (IS_ERR(data->vdd_mif)) { - dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n"); - return PTR_ERR(data->vdd_mif); - } - } - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(dev, - &exynos4_devfreq_profile.initial_freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "Invalid initial frequency %lu kHz.\n", - exynos4_devfreq_profile.initial_freq); - return PTR_ERR(opp); - } - data->curr_oppinfo.rate = dev_pm_opp_get_freq(opp); - data->curr_oppinfo.volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - platform_set_drvdata(pdev, data); - - data->devfreq = devm_devfreq_add_device(dev, &exynos4_devfreq_profile, - "simple_ondemand", NULL); - if (IS_ERR(data->devfreq)) - return PTR_ERR(data->devfreq); - - /* - * Start PPMU (Performance Profiling Monitoring Unit) to check - * utilization of each IP in the Exynos4 SoC. - */ - busfreq_mon_reset(ppmu_data); - - /* Register opp_notifier for Exynos4 busfreq */ - err = devm_devfreq_register_opp_notifier(dev, data->devfreq); - if (err < 0) { - dev_err(dev, "Failed to register opp notifier\n"); - return err; - } - - /* Register pm_notifier for Exynos4 busfreq */ - err = register_pm_notifier(&data->pm_notifier); - if (err) { - dev_err(dev, "Failed to setup pm notifier\n"); - return err; - } - - return 0; -} - -static int exynos4_busfreq_remove(struct platform_device *pdev) -{ - struct busfreq_data *data = platform_get_drvdata(pdev); - - /* Unregister all of notifier chain */ - unregister_pm_notifier(&data->pm_notifier); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int exynos4_busfreq_resume(struct device *dev) -{ - struct busfreq_data *data = dev_get_drvdata(dev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - - busfreq_mon_reset(ppmu_data); - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(exynos4_busfreq_pm_ops, NULL, exynos4_busfreq_resume); - -static const struct platform_device_id exynos4_busfreq_id[] = { - { "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 }, - { "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 }, - { "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 }, - { }, -}; - -static struct platform_driver exynos4_busfreq_driver = { - .probe = exynos4_busfreq_probe, - .remove = exynos4_busfreq_remove, - .id_table = exynos4_busfreq_id, - .driver = { - .name = "exynos4-busfreq", - .pm = &exynos4_busfreq_pm_ops, - }, -}; - -static int __init exynos4_busfreq_init(void) -{ - return platform_driver_register(&exynos4_busfreq_driver); -} -late_initcall(exynos4_busfreq_init); - -static void __exit exynos4_busfreq_exit(void) -{ - platform_driver_unregister(&exynos4_busfreq_driver); -} -module_exit(exynos4_busfreq_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework"); -MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); diff --git a/drivers/devfreq/exynos/exynos4_bus.h b/drivers/devfreq/exynos/exynos4_bus.h deleted file mode 100644 index 94c73c18d28c..000000000000 --- a/drivers/devfreq/exynos/exynos4_bus.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS4 BUS header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __DEVFREQ_EXYNOS4_BUS_H -#define __DEVFREQ_EXYNOS4_BUS_H __FILE__ - -#include <mach/map.h> - -#define EXYNOS4_CLKDIV_LEFTBUS (S5P_VA_CMU + 0x04500) -#define EXYNOS4_CLKDIV_STAT_LEFTBUS (S5P_VA_CMU + 0x04600) - -#define EXYNOS4_CLKDIV_RIGHTBUS (S5P_VA_CMU + 0x08500) -#define EXYNOS4_CLKDIV_STAT_RIGHTBUS (S5P_VA_CMU + 0x08600) - -#define EXYNOS4_CLKDIV_TOP (S5P_VA_CMU + 0x0C510) -#define EXYNOS4_CLKDIV_CAM (S5P_VA_CMU + 0x0C520) -#define EXYNOS4_CLKDIV_MFC (S5P_VA_CMU + 0x0C528) - -#define EXYNOS4_CLKDIV_STAT_TOP (S5P_VA_CMU + 0x0C610) -#define EXYNOS4_CLKDIV_STAT_MFC (S5P_VA_CMU + 0x0C628) - -#define EXYNOS4210_CLKGATE_IP_IMAGE (S5P_VA_CMU + 0x0C930) -#define EXYNOS4212_CLKGATE_IP_IMAGE (S5P_VA_CMU + 0x04930) - -#define EXYNOS4_CLKDIV_DMC0 (S5P_VA_CMU + 0x10500) -#define EXYNOS4_CLKDIV_DMC1 (S5P_VA_CMU + 0x10504) -#define EXYNOS4_CLKDIV_STAT_DMC0 (S5P_VA_CMU + 0x10600) -#define EXYNOS4_CLKDIV_STAT_DMC1 (S5P_VA_CMU + 0x10604) - -#define EXYNOS4_DMC_PAUSE_CTRL (S5P_VA_CMU + 0x11094) -#define EXYNOS4_DMC_PAUSE_ENABLE (1 << 0) - -#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT (0) -#define EXYNOS4_CLKDIV_DMC0_ACP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT (4) -#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT (8) -#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT (12) -#define EXYNOS4_CLKDIV_DMC0_DMC_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT (16) -#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT (20) -#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT (24) -#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT (28) -#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT) - -#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT (0) -#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK (0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT (4) -#define EXYNOS4_CLKDIV_DMC1_C2C_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT (8) -#define EXYNOS4_CLKDIV_DMC1_PWI_MASK (0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT (12) -#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT (16) -#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT (24) -#define EXYNOS4_CLKDIV_DMC1_DPM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT) - -#define EXYNOS4_CLKDIV_MFC_SHIFT (0) -#define EXYNOS4_CLKDIV_MFC_MASK (0x7 << EXYNOS4_CLKDIV_MFC_SHIFT) - -#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT (0) -#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT (4) -#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK (0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT (8) -#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT (12) -#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT (16) -#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT (20) -#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT (24) -#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT) - -#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT (0) -#define EXYNOS4_CLKDIV_BUS_GDLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) -#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT (4) -#define EXYNOS4_CLKDIV_BUS_GPLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT) - -#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT (0) -#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) -#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT (4) -#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) -#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT (8) -#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) -#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT (12) -#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT) - -#define EXYNOS4_CLKDIV_CAM1 (S5P_VA_CMU + 0x0C568) - -#define EXYNOS4_CLKDIV_STAT_CAM1 (S5P_VA_CMU + 0x0C668) - -#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0) -#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT) - -#endif /* __DEVFREQ_EXYNOS4_BUS_H */ diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c deleted file mode 100644 index 297ea30d4159..000000000000 --- a/drivers/devfreq/exynos/exynos5_bus.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework - * Based on work done by Jonghwan Choi <jhbird.choi@samsung.com> - * Support for only EXYNOS5250 is present. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/devfreq.h> -#include <linux/io.h> -#include <linux/pm_opp.h> -#include <linux/slab.h> -#include <linux/suspend.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/pm_qos.h> -#include <linux/regulator/consumer.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> - -#include "exynos_ppmu.h" - -#define MAX_SAFEVOLT 1100000 /* 1.10V */ -/* Assume that the bus is saturated if the utilization is 25% */ -#define INT_BUS_SATURATION_RATIO 25 - -enum int_level_idx { - LV_0, - LV_1, - LV_2, - LV_3, - LV_4, - _LV_END -}; - -enum exynos_ppmu_list { - PPMU_RIGHT, - PPMU_END, -}; - -struct busfreq_data_int { - struct device *dev; - struct devfreq *devfreq; - struct regulator *vdd_int; - struct busfreq_ppmu_data ppmu_data; - unsigned long curr_freq; - bool disabled; - - struct notifier_block pm_notifier; - struct mutex lock; - struct pm_qos_request int_req; - struct clk *int_clk; -}; - -struct int_bus_opp_table { - unsigned int idx; - unsigned long clk; - unsigned long volt; -}; - -static struct int_bus_opp_table exynos5_int_opp_table[] = { - {LV_0, 266000, 1025000}, - {LV_1, 200000, 1025000}, - {LV_2, 160000, 1025000}, - {LV_3, 133000, 1025000}, - {LV_4, 100000, 1025000}, - {0, 0, 0}, -}; - -static int exynos5_int_setvolt(struct busfreq_data_int *data, - unsigned long volt) -{ - return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT); -} - -static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq, - u32 flags) -{ - int err = 0; - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct dev_pm_opp *opp; - unsigned long old_freq, freq; - unsigned long volt; - - rcu_read_lock(); - opp = devfreq_recommended_opp(dev, _freq, flags); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "%s: Invalid OPP.\n", __func__); - return PTR_ERR(opp); - } - - freq = dev_pm_opp_get_freq(opp); - volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - old_freq = data->curr_freq; - - if (old_freq == freq) - return 0; - - dev_dbg(dev, "targeting %lukHz %luuV\n", freq, volt); - - mutex_lock(&data->lock); - - if (data->disabled) - goto out; - - if (freq > exynos5_int_opp_table[0].clk) - pm_qos_update_request(&data->int_req, freq * 16 / 1000); - else - pm_qos_update_request(&data->int_req, -1); - - if (old_freq < freq) - err = exynos5_int_setvolt(data, volt); - if (err) - goto out; - - err = clk_set_rate(data->int_clk, freq * 1000); - - if (err) - goto out; - - if (old_freq > freq) - err = exynos5_int_setvolt(data, volt); - if (err) - goto out; - - data->curr_freq = freq; -out: - mutex_unlock(&data->lock); - return err; -} - -static int exynos5_int_get_dev_status(struct device *dev, - struct devfreq_dev_status *stat) -{ - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - int busier_dmc; - - exynos_read_ppmu(ppmu_data); - busier_dmc = exynos_get_busier_ppmu(ppmu_data); - - stat->current_frequency = data->curr_freq; - - /* Number of cycles spent on memory access */ - stat->busy_time = ppmu_data->ppmu[busier_dmc].count[PPMU_PMNCNT3]; - stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO; - stat->total_time = ppmu_data->ppmu[busier_dmc].ccnt; - - return 0; -} - -static struct devfreq_dev_profile exynos5_devfreq_int_profile = { - .initial_freq = 160000, - .polling_ms = 100, - .target = exynos5_busfreq_int_target, - .get_dev_status = exynos5_int_get_dev_status, -}; - -static int exynos5250_init_int_tables(struct busfreq_data_int *data) -{ - int i, err = 0; - - for (i = LV_0; i < _LV_END; i++) { - err = dev_pm_opp_add(data->dev, exynos5_int_opp_table[i].clk, - exynos5_int_opp_table[i].volt); - if (err) { - dev_err(data->dev, "Cannot add opp entries.\n"); - return err; - } - } - - return 0; -} - -static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct busfreq_data_int *data = container_of(this, - struct busfreq_data_int, pm_notifier); - struct dev_pm_opp *opp; - unsigned long maxfreq = ULONG_MAX; - unsigned long freq; - unsigned long volt; - int err = 0; - - switch (event) { - case PM_SUSPEND_PREPARE: - /* Set Fastest and Deactivate DVFS */ - mutex_lock(&data->lock); - - data->disabled = true; - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - err = PTR_ERR(opp); - goto unlock; - } - freq = dev_pm_opp_get_freq(opp); - volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - err = exynos5_int_setvolt(data, volt); - if (err) - goto unlock; - - err = clk_set_rate(data->int_clk, freq * 1000); - - if (err) - goto unlock; - - data->curr_freq = freq; -unlock: - mutex_unlock(&data->lock); - if (err) - return NOTIFY_BAD; - return NOTIFY_OK; - case PM_POST_RESTORE: - case PM_POST_SUSPEND: - /* Reactivate */ - mutex_lock(&data->lock); - data->disabled = false; - mutex_unlock(&data->lock); - return NOTIFY_OK; - } - - return NOTIFY_DONE; -} - -static int exynos5_busfreq_int_probe(struct platform_device *pdev) -{ - struct busfreq_data_int *data; - struct busfreq_ppmu_data *ppmu_data; - struct dev_pm_opp *opp; - struct device *dev = &pdev->dev; - struct device_node *np; - unsigned long initial_freq; - unsigned long initial_volt; - int err = 0; - int i; - - data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int), - GFP_KERNEL); - if (data == NULL) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - - ppmu_data = &data->ppmu_data; - ppmu_data->ppmu_end = PPMU_END; - ppmu_data->ppmu = devm_kzalloc(dev, - sizeof(struct exynos_ppmu) * PPMU_END, - GFP_KERNEL); - if (!ppmu_data->ppmu) { - dev_err(dev, "Failed to allocate memory for exynos_ppmu\n"); - return -ENOMEM; - } - - np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu"); - if (np == NULL) { - pr_err("Unable to find PPMU node\n"); - return -ENOENT; - } - - for (i = 0; i < ppmu_data->ppmu_end; i++) { - /* map PPMU memory region */ - ppmu_data->ppmu[i].hw_base = of_iomap(np, i); - if (ppmu_data->ppmu[i].hw_base == NULL) { - dev_err(&pdev->dev, "failed to map memory region\n"); - return -ENOMEM; - } - } - data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event; - data->dev = dev; - mutex_init(&data->lock); - - err = exynos5250_init_int_tables(data); - if (err) - return err; - - data->vdd_int = devm_regulator_get(dev, "vdd_int"); - if (IS_ERR(data->vdd_int)) { - dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); - return PTR_ERR(data->vdd_int); - } - - data->int_clk = devm_clk_get(dev, "int_clk"); - if (IS_ERR(data->int_clk)) { - dev_err(dev, "Cannot get clock \"int_clk\"\n"); - return PTR_ERR(data->int_clk); - } - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(dev, - &exynos5_devfreq_int_profile.initial_freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "Invalid initial frequency %lu kHz.\n", - exynos5_devfreq_int_profile.initial_freq); - return PTR_ERR(opp); - } - initial_freq = dev_pm_opp_get_freq(opp); - initial_volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - data->curr_freq = initial_freq; - - err = clk_set_rate(data->int_clk, initial_freq * 1000); - if (err) { - dev_err(dev, "Failed to set initial frequency\n"); - return err; - } - - err = exynos5_int_setvolt(data, initial_volt); - if (err) - return err; - - platform_set_drvdata(pdev, data); - - busfreq_mon_reset(ppmu_data); - - data->devfreq = devm_devfreq_add_device(dev, &exynos5_devfreq_int_profile, - "simple_ondemand", NULL); - if (IS_ERR(data->devfreq)) - return PTR_ERR(data->devfreq); - - err = devm_devfreq_register_opp_notifier(dev, data->devfreq); - if (err < 0) { - dev_err(dev, "Failed to register opp notifier\n"); - return err; - } - - err = register_pm_notifier(&data->pm_notifier); - if (err) { - dev_err(dev, "Failed to setup pm notifier\n"); - return err; - } - - /* TODO: Add a new QOS class for int/mif bus */ - pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1); - - return 0; -} - -static int exynos5_busfreq_int_remove(struct platform_device *pdev) -{ - struct busfreq_data_int *data = platform_get_drvdata(pdev); - - pm_qos_remove_request(&data->int_req); - unregister_pm_notifier(&data->pm_notifier); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int exynos5_busfreq_int_resume(struct device *dev) -{ - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - - busfreq_mon_reset(ppmu_data); - return 0; -} -static const struct dev_pm_ops exynos5_busfreq_int_pm = { - .resume = exynos5_busfreq_int_resume, -}; -#endif -static SIMPLE_DEV_PM_OPS(exynos5_busfreq_int_pm_ops, NULL, - exynos5_busfreq_int_resume); - -/* platform device pointer for exynos5 devfreq device. */ -static struct platform_device *exynos5_devfreq_pdev; - -static struct platform_driver exynos5_busfreq_int_driver = { - .probe = exynos5_busfreq_int_probe, - .remove = exynos5_busfreq_int_remove, - .driver = { - .name = "exynos5-bus-int", - .pm = &exynos5_busfreq_int_pm_ops, - }, -}; - -static int __init exynos5_busfreq_int_init(void) -{ - int ret; - - ret = platform_driver_register(&exynos5_busfreq_int_driver); - if (ret < 0) - goto out; - - exynos5_devfreq_pdev = - platform_device_register_simple("exynos5-bus-int", -1, NULL, 0); - if (IS_ERR(exynos5_devfreq_pdev)) { - ret = PTR_ERR(exynos5_devfreq_pdev); - goto out1; - } - - return 0; -out1: - platform_driver_unregister(&exynos5_busfreq_int_driver); -out: - return ret; -} -late_initcall(exynos5_busfreq_int_init); - -static void __exit exynos5_busfreq_int_exit(void) -{ - platform_device_unregister(exynos5_devfreq_pdev); - platform_driver_unregister(&exynos5_busfreq_int_driver); -} -module_exit(exynos5_busfreq_int_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework"); diff --git a/drivers/devfreq/exynos/exynos_ppmu.c b/drivers/devfreq/exynos/exynos_ppmu.c deleted file mode 100644 index 97b75e513d29..000000000000 --- a/drivers/devfreq/exynos/exynos_ppmu.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS - PPMU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/io.h> - -#include "exynos_ppmu.h" - -void exynos_ppmu_reset(void __iomem *ppmu_base) -{ - __raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base); - __raw_writel(PPMU_ENABLE_CYCLE | - PPMU_ENABLE_COUNT0 | - PPMU_ENABLE_COUNT1 | - PPMU_ENABLE_COUNT2 | - PPMU_ENABLE_COUNT3, - ppmu_base + PPMU_CNTENS); -} - -void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch, - unsigned int evt) -{ - __raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch)); -} - -void exynos_ppmu_start(void __iomem *ppmu_base) -{ - __raw_writel(PPMU_ENABLE, ppmu_base); -} - -void exynos_ppmu_stop(void __iomem *ppmu_base) -{ - __raw_writel(PPMU_DISABLE, ppmu_base); -} - -unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch) -{ - unsigned int total; - - if (ch == PPMU_PMNCNT3) - total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) | - __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1))); - else - total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch)); - - return total; -} - -void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data) -{ - unsigned int i; - - for (i = 0; i < ppmu_data->ppmu_end; i++) { - void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base; - - /* Reset the performance and cycle counters */ - exynos_ppmu_reset(ppmu_base); - - /* Setup count registers to monitor read/write transactions */ - ppmu_data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT; - exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3, - ppmu_data->ppmu[i].event[PPMU_PMNCNT3]); - - exynos_ppmu_start(ppmu_base); - } -} -EXPORT_SYMBOL(busfreq_mon_reset); - -void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data) -{ - int i, j; - - for (i = 0; i < ppmu_data->ppmu_end; i++) { - void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base; - - exynos_ppmu_stop(ppmu_base); - - /* Update local data from PPMU */ - ppmu_data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT); - - for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) { - if (ppmu_data->ppmu[i].event[j] == 0) - ppmu_data->ppmu[i].count[j] = 0; - else - ppmu_data->ppmu[i].count[j] = - exynos_ppmu_read(ppmu_base, j); - } - } - - busfreq_mon_reset(ppmu_data); -} -EXPORT_SYMBOL(exynos_read_ppmu); - -int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data) -{ - unsigned int count = 0; - int i, j, busy = 0; - - for (i = 0; i < ppmu_data->ppmu_end; i++) { - for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) { - if (ppmu_data->ppmu[i].count[j] > count) { - count = ppmu_data->ppmu[i].count[j]; - busy = i; - } - } - } - - return busy; -} -EXPORT_SYMBOL(exynos_get_busier_ppmu); diff --git a/drivers/devfreq/exynos/exynos_ppmu.h b/drivers/devfreq/exynos/exynos_ppmu.h deleted file mode 100644 index 71f17ba3563c..000000000000 --- a/drivers/devfreq/exynos/exynos_ppmu.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS PPMU header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __DEVFREQ_EXYNOS_PPMU_H -#define __DEVFREQ_EXYNOS_PPMU_H __FILE__ - -#include <linux/ktime.h> - -/* For PPMU Control */ -#define PPMU_ENABLE BIT(0) -#define PPMU_DISABLE 0x0 -#define PPMU_CYCLE_RESET BIT(1) -#define PPMU_COUNTER_RESET BIT(2) - -#define PPMU_ENABLE_COUNT0 BIT(0) -#define PPMU_ENABLE_COUNT1 BIT(1) -#define PPMU_ENABLE_COUNT2 BIT(2) -#define PPMU_ENABLE_COUNT3 BIT(3) -#define PPMU_ENABLE_CYCLE BIT(31) - -#define PPMU_CNTENS 0x10 -#define PPMU_FLAG 0x50 -#define PPMU_CCNT_OVERFLOW BIT(31) -#define PPMU_CCNT 0x100 - -#define PPMU_PMCNT0 0x110 -#define PPMU_PMCNT_OFFSET 0x10 -#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x)) - -#define PPMU_BEVT0SEL 0x1000 -#define PPMU_BEVTSEL_OFFSET 0x100 -#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET)) - -/* For Event Selection */ -#define RD_DATA_COUNT 0x5 -#define WR_DATA_COUNT 0x6 -#define RDWR_DATA_COUNT 0x7 - -enum ppmu_counter { - PPMU_PMNCNT0, - PPMU_PMCCNT1, - PPMU_PMNCNT2, - PPMU_PMNCNT3, - PPMU_PMNCNT_MAX, -}; - -struct bus_opp_table { - unsigned int idx; - unsigned long clk; - unsigned long volt; -}; - -struct exynos_ppmu { - void __iomem *hw_base; - unsigned int ccnt; - unsigned int event[PPMU_PMNCNT_MAX]; - unsigned int count[PPMU_PMNCNT_MAX]; - unsigned long long ns; - ktime_t reset_time; - bool ccnt_overflow; - bool count_overflow[PPMU_PMNCNT_MAX]; -}; - -struct busfreq_ppmu_data { - struct exynos_ppmu *ppmu; - int ppmu_end; -}; - -void exynos_ppmu_reset(void __iomem *ppmu_base); -void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch, - unsigned int evt); -void exynos_ppmu_start(void __iomem *ppmu_base); -void exynos_ppmu_stop(void __iomem *ppmu_base); -unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch); -void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data); -void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data); -int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data); -#endif /* __DEVFREQ_EXYNOS_PPMU_H */ diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c new file mode 100644 index 000000000000..9ef46e2592c4 --- /dev/null +++ b/drivers/devfreq/governor_passive.c @@ -0,0 +1,205 @@ +/* + * linux/drivers/devfreq/governor_passive.c + * + * Copyright (C) 2016 Samsung Electronics + * Author: Chanwoo Choi <cw00.choi@samsung.com> + * Author: MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/devfreq.h> +#include "governor.h" + +static int devfreq_passive_get_target_freq(struct devfreq *devfreq, + unsigned long *freq) +{ + struct devfreq_passive_data *p_data + = (struct devfreq_passive_data *)devfreq->data; + struct devfreq *parent_devfreq = (struct devfreq *)p_data->parent; + unsigned long child_freq = ULONG_MAX; + struct dev_pm_opp *opp; + int i, count, ret = 0; + + /* + * If the devfreq device with passive governor has the specific method + * to determine the next frequency, should use the get_target_freq() + * of struct devfreq_passive_data. + */ + if (p_data->get_target_freq) { + ret = p_data->get_target_freq(devfreq, freq); + goto out; + } + + /* + * If the parent and passive devfreq device uses the OPP table, + * get the next frequency by using the OPP table. + */ + + /* + * - parent devfreq device uses the governors except for passive. + * - passive devfreq device uses the passive governor. + * + * Each devfreq has the OPP table. After deciding the new frequency + * from the governor of parent devfreq device, the passive governor + * need to get the index of new frequency on OPP table of parent + * device. And then the index is used for getting the suitable + * new frequency for passive devfreq device. + */ + if (!devfreq->profile || !devfreq->profile->freq_table + || devfreq->profile->max_state <= 0) + return -EINVAL; + + /* + * The passive governor have to get the correct frequency from OPP + * list of parent device. Because in this case, *freq is temporary + * value which is decided by ondemand governor. + */ + rcu_read_lock(); + opp = devfreq_recommended_opp(parent_devfreq->dev.parent, freq, 0); + rcu_read_unlock(); + if (IS_ERR(opp)) { + ret = PTR_ERR(opp); + goto out; + } + + /* + * Get the OPP table's index of decided freqeuncy by governor + * of parent device. + */ + for (i = 0; i < parent_devfreq->profile->max_state; i++) + if (parent_devfreq->profile->freq_table[i] == *freq) + break; + + if (i == parent_devfreq->profile->max_state) { + ret = -EINVAL; + goto out; + } + + /* Get the suitable frequency by using index of parent device. */ + if (i < devfreq->profile->max_state) { + child_freq = devfreq->profile->freq_table[i]; + } else { + count = devfreq->profile->max_state; + child_freq = devfreq->profile->freq_table[count - 1]; + } + + /* Return the suitable frequency for passive device. */ + *freq = child_freq; + +out: + return ret; +} + +static int update_devfreq_passive(struct devfreq *devfreq, unsigned long freq) +{ + int ret; + + if (!devfreq->governor) + return -EINVAL; + + mutex_lock_nested(&devfreq->lock, SINGLE_DEPTH_NESTING); + + ret = devfreq->governor->get_target_freq(devfreq, &freq); + if (ret < 0) + goto out; + + ret = devfreq->profile->target(devfreq->dev.parent, &freq, 0); + if (ret < 0) + goto out; + + devfreq->previous_freq = freq; + +out: + mutex_unlock(&devfreq->lock); + + return 0; +} + +static int devfreq_passive_notifier_call(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct devfreq_passive_data *data + = container_of(nb, struct devfreq_passive_data, nb); + struct devfreq *devfreq = (struct devfreq *)data->this; + struct devfreq *parent = (struct devfreq *)data->parent; + struct devfreq_freqs *freqs = (struct devfreq_freqs *)ptr; + unsigned long freq = freqs->new; + + switch (event) { + case DEVFREQ_PRECHANGE: + if (parent->previous_freq > freq) + update_devfreq_passive(devfreq, freq); + break; + case DEVFREQ_POSTCHANGE: + if (parent->previous_freq < freq) + update_devfreq_passive(devfreq, freq); + break; + } + + return NOTIFY_DONE; +} + +static int devfreq_passive_event_handler(struct devfreq *devfreq, + unsigned int event, void *data) +{ + struct device *dev = devfreq->dev.parent; + struct devfreq_passive_data *p_data + = (struct devfreq_passive_data *)devfreq->data; + struct devfreq *parent = (struct devfreq *)p_data->parent; + struct notifier_block *nb = &p_data->nb; + int ret = 0; + + if (!parent) + return -EPROBE_DEFER; + + switch (event) { + case DEVFREQ_GOV_START: + if (!p_data->this) + p_data->this = devfreq; + + nb->notifier_call = devfreq_passive_notifier_call; + ret = devm_devfreq_register_notifier(dev, parent, nb, + DEVFREQ_TRANSITION_NOTIFIER); + break; + case DEVFREQ_GOV_STOP: + devm_devfreq_unregister_notifier(dev, parent, nb, + DEVFREQ_TRANSITION_NOTIFIER); + break; + default: + break; + } + + return ret; +} + +static struct devfreq_governor devfreq_passive = { + .name = "passive", + .get_target_freq = devfreq_passive_get_target_freq, + .event_handler = devfreq_passive_event_handler, +}; + +static int __init devfreq_passive_init(void) +{ + return devfreq_add_governor(&devfreq_passive); +} +subsys_initcall(devfreq_passive_init); + +static void __exit devfreq_passive_exit(void) +{ + int ret; + + ret = devfreq_remove_governor(&devfreq_passive); + if (ret) + pr_err("%s: failed remove governor %d\n", __func__, ret); +} +module_exit(devfreq_passive_exit); + +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); +MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); +MODULE_DESCRIPTION("DEVFREQ Passive governor"); +MODULE_LICENSE("GPL v2"); |