diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/ata/ahci.h | 7 | ||||
-rw-r--r-- | drivers/ata/libahci_platform.c | 189 |
2 files changed, 157 insertions, 39 deletions
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 15396f0330ae..59ae0ee00149 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -334,7 +334,12 @@ struct ahci_host_priv { bool got_runtime_pm; /* Did we do pm_runtime_get? */ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ struct regulator *target_pwr; /* Optional */ - struct phy *phy; /* If platform uses phy */ + /* + * If platform uses PHYs. There is a 1:1 relation between the port number and + * the PHY position in this array. + */ + struct phy **phys; + unsigned nports; /* Number of ports */ void *plat_data; /* Other platform data */ /* * Optional ahci_start_engine override, if not set this gets set to the diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 00582d3a46a4..a60b8cd40198 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -39,6 +39,67 @@ static struct scsi_host_template ahci_platform_sht = { }; /** + * ahci_platform_enable_phys - Enable PHYs + * @hpriv: host private area to store config values + * + * This function enables all the PHYs found in hpriv->phys, if any. + * If a PHY fails to be enabled, it disables all the PHYs already + * enabled in reverse order and returns an error. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_enable_phys(struct ahci_host_priv *hpriv) +{ + int rc, i; + + for (i = 0; i < hpriv->nports; i++) { + if (!hpriv->phys[i]) + continue; + + rc = phy_init(hpriv->phys[i]); + if (rc) + goto disable_phys; + + rc = phy_power_on(hpriv->phys[i]); + if (rc) { + phy_exit(hpriv->phys[i]); + goto disable_phys; + } + } + + return 0; + +disable_phys: + while (--i >= 0) { + phy_power_off(hpriv->phys[i]); + phy_exit(hpriv->phys[i]); + } + return rc; +} +EXPORT_SYMBOL_GPL(ahci_platform_enable_phys); + +/** + * ahci_platform_disable_phys - Disable PHYs + * @hpriv: host private area to store config values + * + * This function disables all PHYs found in hpriv->phys. + */ +void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) +{ + int i; + + for (i = 0; i < hpriv->nports; i++) { + if (!hpriv->phys[i]) + continue; + + phy_power_off(hpriv->phys[i]); + phy_exit(hpriv->phys[i]); + } +} +EXPORT_SYMBOL_GPL(ahci_platform_disable_phys); + +/** * ahci_platform_enable_clks - Enable platform clocks * @hpriv: host private area to store config values * @@ -92,7 +153,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); * following order: * 1) Regulator * 2) Clocks (through ahci_platform_enable_clks) - * 3) Phy + * 3) Phys * * If resource enabling fails at any point the previous enabled resources * are disabled in reverse order. @@ -114,17 +175,9 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) if (rc) goto disable_regulator; - if (hpriv->phy) { - rc = phy_init(hpriv->phy); - if (rc) - goto disable_clks; - - rc = phy_power_on(hpriv->phy); - if (rc) { - phy_exit(hpriv->phy); - goto disable_clks; - } - } + rc = ahci_platform_enable_phys(hpriv); + if (rc) + goto disable_clks; return 0; @@ -144,16 +197,13 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources); * * This function disables all ahci_platform managed resources in the * following order: - * 1) Phy + * 1) Phys * 2) Clocks (through ahci_platform_disable_clks) * 3) Regulator */ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) { - if (hpriv->phy) { - phy_power_off(hpriv->phy); - phy_exit(hpriv->phy); - } + ahci_platform_disable_phys(hpriv); ahci_platform_disable_clks(hpriv); @@ -187,7 +237,7 @@ static void ahci_platform_put_resources(struct device *dev, void *res) * 2) regulator for controlling the targets power (optional) * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, * or for non devicetree enabled platforms a single clock - * 4) phy (optional) + * 4) phys (optional) * * RETURNS: * The allocated ahci_host_priv on success, otherwise an ERR_PTR value @@ -197,7 +247,9 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev) struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; struct clk *clk; - int i, rc = -ENOMEM; + struct device_node *child; + int i, enabled_ports = 0, rc = -ENOMEM; + u32 mask_port_map = 0; if (!devres_open_group(dev, NULL, GFP_KERNEL)) return ERR_PTR(-ENOMEM); @@ -246,28 +298,89 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev) hpriv->clks[i] = clk; } - hpriv->phy = devm_phy_get(dev, "sata-phy"); - if (IS_ERR(hpriv->phy)) { - rc = PTR_ERR(hpriv->phy); - switch (rc) { - case -ENOSYS: - /* No PHY support. Check if PHY is required. */ - if (of_find_property(dev->of_node, "phys", NULL)) { - dev_err(dev, "couldn't get sata-phy: ENOSYS\n"); + hpriv->nports = of_get_child_count(dev->of_node); + + if (hpriv->nports) { + hpriv->phys = devm_kzalloc(dev, + hpriv->nports * sizeof(*hpriv->phys), + GFP_KERNEL); + if (!hpriv->phys) { + rc = -ENOMEM; + goto err_out; + } + + for_each_child_of_node(dev->of_node, child) { + u32 port; + + if (!of_device_is_available(child)) + continue; + + if (of_property_read_u32(child, "reg", &port)) { + rc = -EINVAL; goto err_out; } - case -ENODEV: - /* continue normally */ - hpriv->phy = NULL; - break; - case -EPROBE_DEFER: - goto err_out; + if (port >= hpriv->nports) { + dev_warn(dev, "invalid port number %d\n", port); + continue; + } + + mask_port_map |= BIT(port); + + hpriv->phys[port] = devm_of_phy_get(dev, child, NULL); + if (IS_ERR(hpriv->phys[port])) { + rc = PTR_ERR(hpriv->phys[port]); + dev_err(dev, + "couldn't get PHY in node %s: %d\n", + child->name, rc); + goto err_out; + } - default: - dev_err(dev, "couldn't get sata-phy\n"); + enabled_ports++; + } + if (!enabled_ports) { + dev_warn(dev, "No port enabled\n"); + rc = -ENODEV; goto err_out; } + + if (!hpriv->mask_port_map) + hpriv->mask_port_map = mask_port_map; + } else { + /* + * If no sub-node was found, keep this for device tree + * compatibility + */ + struct phy *phy = devm_phy_get(dev, "sata-phy"); + if (!IS_ERR(phy)) { + hpriv->phys = devm_kzalloc(dev, sizeof(*hpriv->phys), + GFP_KERNEL); + if (!hpriv->phys) { + rc = -ENOMEM; + goto err_out; + } + + hpriv->phys[0] = phy; + hpriv->nports = 1; + } else { + rc = PTR_ERR(phy); + switch (rc) { + case -ENOSYS: + /* No PHY support. Check if PHY is required. */ + if (of_find_property(dev->of_node, "phys", NULL)) { + dev_err(dev, "couldn't get sata-phy: ENOSYS\n"); + goto err_out; + } + case -ENODEV: + /* continue normally */ + hpriv->phys = NULL; + break; + + default: + goto err_out; + + } + } } pm_runtime_enable(dev); @@ -290,7 +403,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_get_resources); * @pi_template: template for the ata_port_info to use * * This function does all the usual steps needed to bring up an - * ahci-platform host, note any necessary resources (ie clks, phy, etc.) + * ahci-platform host, note any necessary resources (ie clks, phys, etc.) * must be initialized / enabled before calling this. * * RETURNS: @@ -405,7 +518,7 @@ static void ahci_host_stop(struct ata_host *host) * @dev: device pointer for the host * * This function does all the usual steps needed to suspend an - * ahci-platform host, note any necessary resources (ie clks, phy, etc.) + * ahci-platform host, note any necessary resources (ie clks, phys, etc.) * must be disabled after calling this. * * RETURNS: @@ -442,7 +555,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_suspend_host); * @dev: device pointer for the host * * This function does all the usual steps needed to resume an ahci-platform - * host, note any necessary resources (ie clks, phy, etc.) must be + * host, note any necessary resources (ie clks, phys, etc.) must be * initialized / enabled before calling this. * * RETURNS: |